* Tue Oct 6 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-9

- Change logrotate config to weekly (#526769)

.cvsignore

@@ -0,0 +1,13 @@
+.build*.log
+*.rpm
+i686
+x86_64
+libvirt-*.tar.gz
+libvirt-0.6.0.tar.gz
+libvirt-0.6.1.tar.gz
+libvirt-0.6.2.tar.gz
+libvirt-0.6.3.tar.gz
+libvirt-0.6.4.tar.gz
+libvirt-0.6.5.tar.gz
+libvirt-0.7.0.tar.gz
+libvirt-0.7.1.tar.gz

.gitignore

@@ -1,5 +0,0 @@
-.build*.log
-*.rpm
-i686
-x86_64
-libvirt-*.tar.xz

0001-Fix-padding-of-encrypted-data.patch

@@ -1,55 +0,0 @@
-From: "Daniel P. Berrange" <berrange@redhat.com>
-Date: Tue, 2 May 2017 11:32:43 +0100
-Subject: [PATCH] Fix padding of encrypted data
-
-If we are encoding a block of data that is 16 bytes in length,
-we cannot leave it as 16 bytes, we must pad it out to the next
-block boundary, 32 bytes. Without this padding, the decoder will
-incorrectly treat the last byte of plain text as the padding
-length, as it can't distinguish padded from non-padded data.
-
-The problem exhibited itself when using a 16 byte passphrase
-for a LUKS volume
-
-  $ virsh secret-set-value 55806c7d-8e93-456f-829b-607d8c198367 \
-       $(echo -n 1234567812345678 | base64)
-  Secret value set
-
-  $ virsh start demo
-  error: Failed to start domain demo
-  error: internal error: process exited while connecting to monitor: >>>>>>>>>>Len 16
-  2017-05-02T10:35:40.016390Z qemu-system-x86_64: -object \
-    secret,id=virtio-disk1-luks-secret0,data=SEtNi5vDUeyseMKHwc1c1Q==,\
-    keyid=masterKey0,iv=zm7apUB1A6dPcH53VW960Q==,format=base64: \
-    Incorrect number of padding bytes (56) found on decrypted data
-
-Notice how the padding '56' corresponds to the ordinal value of
-the character '8'.
-
-Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
-(cherry picked from commit 71890992daf37ec78b00b4ce873369421dc99731)
----
- src/util/vircrypto.c | 10 ++++++++--
- 1 file changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/src/util/vircrypto.c b/src/util/vircrypto.c
-index 03410a1a4..8f1e0b7b7 100644
---- a/src/util/vircrypto.c
-+++ b/src/util/vircrypto.c
-@@ -152,8 +152,14 @@ virCryptoEncryptDataAESgnutls(gnutls_cipher_algorithm_t gnutls_enc_alg,
-     uint8_t *ciphertext;
-     size_t ciphertextlen;
- 
--    /* Allocate a padded buffer, copy in the data */
--    ciphertextlen = VIR_ROUND_UP(datalen, 16);
-+    /* Allocate a padded buffer, copy in the data.
-+     *
-+     * NB, we must *always* have at least 1 byte of
-+     * padding - we can't skip it on multiples of
-+     * 16, otherwise decoder can't distinguish padded
-+     * data from non-padded data. Hence datalen + 1
-+     */
-+    ciphertextlen = VIR_ROUND_UP(datalen + 1, 16);
-     if (VIR_ALLOC_N(ciphertext, ciphertextlen) < 0)
-         return -1;
-     memcpy(ciphertext, data, datalen);

0002-spec-Add-support-for-building-the-zfs-storage-driver.patch

@@ -1,90 +0,0 @@
-From: Neal Gompa <ngompa13@gmail.com>
-Date: Mon, 17 Jul 2017 11:32:46 -0400
-Subject: [PATCH] spec: Add support for building the zfs storage driver
-
-Where it can be supported in Fedora, the driver is built and made
-available as a subpackage.
-
-Signed-off-by: Neal Gompa <ngompa13@gmail.com>
-(cherry picked from commit 9af764e86aef7dfb0191a9561bf1d1abf941da05)
----
- libvirt.spec.in | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/libvirt.spec.in b/libvirt.spec.in
-index 8eb67fa2e..f9a705e7c 100644
---- a/libvirt.spec.in
-+++ b/libvirt.spec.in
-@@ -70,6 +70,13 @@
- %define with_storage_gluster 0%{!?_without_storage_gluster:1}
- %define with_numactl          0%{!?_without_numactl:1}
- 
-+# F25+ has zfs-fuse
-+%if 0%{?fedora} >= 25
-+    %define with_storage_zfs      0%{!?_without_storage_zfs:1}
-+%else
-+    %define with_storage_zfs      0
-+%endif
-+
- # A few optional bits off by default, we enable later
- %define with_fuse          0%{!?_without_fuse:0}
- %define with_cgconfig      0%{!?_without_cgconfig:0}
-@@ -113,6 +120,12 @@
-     %endif
- %endif
- 
-+# zfs-fuse is not available on some architectures
-+%ifarch s390 s390x aarch64
-+    %define with_storage_zfs 0
-+%endif
-+
-+
- # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor,
- # VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
- # or HyperV.
-@@ -364,6 +377,12 @@ BuildRequires: glusterfs-devel >= 3.4.1
- %if %{with_storage_sheepdog}
- BuildRequires: sheepdog
- %endif
-+%if %{with_storage_zfs}
-+# Support any conforming implementation of zfs. On stock Fedora
-+# this is zfs-fuse, but could be zfsonlinux upstream RPMs
-+BuildRequires: /sbin/zfs
-+BuildRequires: /sbin/zpool
-+%endif
- %if %{with_numactl}
- # For QEMU/LXC numa info
- BuildRequires: numactl-devel
-@@ -597,6 +616,11 @@ Requires: device-mapper
- # For Sheepdog support
- Requires: sheepdog
- %endif
-+%if %{with_storage_zfs}
-+# Support any conforming implementation of zfs
-+Requires: /sbin/zfs
-+Requires: /sbin/zpool
-+%endif
- %if %{with_qemu}
- # From QEMU RPMs
- Requires: /usr/bin/qemu-img
-@@ -1063,6 +1087,12 @@ rm -rf .git
-     %define arg_storage_gluster --without-storage-gluster
- %endif
- 
-+%if %{with_storage_zfs}
-+    %define arg_storage_zfs --with-storage-zfs
-+%else
-+    %define arg_storage_zfs --without-storage-zfs
-+%endif
-+
- %if %{with_numactl}
-     %define arg_numactl --with-numactl
- %else
-@@ -1170,6 +1200,7 @@ rm -f po/stamp-po
-            %{?arg_storage_rbd} \
-            %{?arg_storage_sheepdog} \
-            %{?arg_storage_gluster} \
-+           %{?arg_storage_zfs} \
-            %{?arg_numactl} \
-            %{?arg_numad} \
-            --with-capng \

0003-Avoid-hidden-cgroup-mount-points.patch

@@ -1,150 +0,0 @@
-From: Juan Hernandez <jhernand@redhat.com>
-Date: Thu, 6 Jul 2017 17:03:31 +0200
-Subject: [PATCH] Avoid hidden cgroup mount points
-
-Currently the scan of the /proc/mounts file used to find cgroup mount
-points doesn't take into account that mount points may hidden by other
-mount points. For, example in certain Kubernetes environments the
-/proc/mounts contains the following lines:
-
-  cgroup /sys/fs/cgroup/net_prio,net_cls cgroup ...
-  tmpfs /sys/fs/cgroup tmpfs ...
-  cgroup /sys/fs/cgroup/net_cls,net_prio cgroup ...
-
-In this particular environment the first mount point is hidden by the
-second one. The correct mount point is the third one, but libvirt will
-never process it because it only checks the first mount point for each
-controller (net_cls in this case). So libvirt will try to use the first
-mount point, which doesn't actually exist, and the complete detection
-process will fail.
-
-To avoid that issue this patch changes the virCgroupDetectMountsFromFile
-function so that when there are duplicates it takes the information from
-the last line in /proc/mounts. This requires removing the previous
-explicit condition to skip duplicates, and adding code to free the
-memory used by the processing of duplicated lines.
-
-Related-To: https://bugzilla.redhat.com/1468214
-Related-To: https://github.com/kubevirt/libvirt/issues/4
-Signed-off-by: Juan Hernandez <jhernand@redhat.com>
-(cherry picked from commit dacd160d7479e0ec2d8a63f102145fd30636a1c8)
----
- src/util/vircgroup.c                | 23 ++++++++++++++---------
- tests/vircgroupdata/kubevirt.mounts | 25 +++++++++++++++++++++++++
- tests/vircgroupdata/kubevirt.parsed | 10 ++++++++++
- tests/vircgrouptest.c               |  1 +
- 4 files changed, 50 insertions(+), 9 deletions(-)
- create mode 100644 tests/vircgroupdata/kubevirt.mounts
- create mode 100644 tests/vircgroupdata/kubevirt.parsed
-
-diff --git a/src/util/vircgroup.c b/src/util/vircgroup.c
-index f2477d5e9..322f7fb54 100644
---- a/src/util/vircgroup.c
-+++ b/src/util/vircgroup.c
-@@ -396,6 +396,7 @@ virCgroupDetectMountsFromFile(virCgroupPtr group,
-             const char *typestr = virCgroupControllerTypeToString(i);
-             int typelen = strlen(typestr);
-             char *tmp = entry.mnt_opts;
-+            struct virCgroupController *controller = &group->controllers[i];
-             while (tmp) {
-                 char *next = strchr(tmp, ',');
-                 int len;
-@@ -405,18 +406,22 @@ virCgroupDetectMountsFromFile(virCgroupPtr group,
-                 } else {
-                     len = strlen(tmp);
-                 }
--                /* NB, the same controller can appear >1 time in mount list
--                 * due to bind mounts from one location to another. Pick the
--                 * first entry only
--                 */
--                if (typelen == len && STREQLEN(typestr, tmp, len) &&
--                    !group->controllers[i].mountPoint) {
-+
-+                if (typelen == len && STREQLEN(typestr, tmp, len)) {
-                     char *linksrc;
-                     struct stat sb;
-                     char *tmp2;
- 
--                    if (VIR_STRDUP(group->controllers[i].mountPoint,
--                                   entry.mnt_dir) < 0)
-+                    /* Note that the lines in /proc/mounts have the same
-+                     * order than the mount operations, and that there may
-+                     * be duplicates due to bind mounts. This means
-+                     * that the same mount point may be processed more than
-+                     * once. We need to save the results of the last one,
-+                     * and we need to be careful to release the memory used
-+                     * by previous processing. */
-+                    VIR_FREE(controller->mountPoint);
-+                    VIR_FREE(controller->linkPoint);
-+                    if (VIR_STRDUP(controller->mountPoint, entry.mnt_dir) < 0)
-                         goto error;
- 
-                     tmp2 = strrchr(entry.mnt_dir, '/');
-@@ -452,7 +457,7 @@ virCgroupDetectMountsFromFile(virCgroupPtr group,
-                                 VIR_WARN("Expecting a symlink at %s for controller %s",
-                                          linksrc, typestr);
-                             } else {
--                                group->controllers[i].linkPoint = linksrc;
-+                                controller->linkPoint = linksrc;
-                             }
-                         }
-                     }
-diff --git a/tests/vircgroupdata/kubevirt.mounts b/tests/vircgroupdata/kubevirt.mounts
-new file mode 100644
-index 000000000..ca036196b
---- /dev/null
-+++ b/tests/vircgroupdata/kubevirt.mounts
-@@ -0,0 +1,25 @@
-+rootfs / rootfs rw 0 0
-+proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
-+udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=1006404,mode=755 0 0
-+devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
-+sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
-+/dev/sda1 / ext4 rw,noatime,data=ordered 0 0
-+tmpfs /run tmpfs rw,nodev,relatime,size=812296k,mode=755 0 0
-+mqueue /dev/mqueue mqueue rw,nosuid,nodev,noexec,relatime 0 0
-+shm /dev/shm tmpfs rw,nosuid,nodev,noexec,relatime 0 0
-+debugfs /sys/kernel/debug debugfs rw,nosuid,nodev,noexec,relatime 0 0
-+cgroup_root /sys/fs/cgroup tmpfs rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755 0 0
-+openrc /sys/fs/cgroup/openrc cgroup rw,nosuid,nodev,noexec,relatime,release_agent=/lib64/rc/sh/cgroup-release-agent.sh,name=openrc 0 0
-+cpuset /some/random/location/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
-+cpuset /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
-+cpu /sys/fs/cgroup/cpu cgroup rw,nosuid,nodev,noexec,relatime,cpu 0 0
-+cpuacct /some/random/location/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuacct 0 0
-+cpuacct /sys/fs/cgroup/cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpuacct 0 0
-+memory /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
-+devices /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
-+freezer /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
-+blkio /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
-+perf_event /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
-+hugetlb /sys/fs/cgroup/hugetlb cgroup rw,nosuid,nodev,noexec,relatime,hugetlb 0 0
-+binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0
-+freezer /some/random/location/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
-diff --git a/tests/vircgroupdata/kubevirt.parsed b/tests/vircgroupdata/kubevirt.parsed
-new file mode 100644
-index 000000000..694870723
---- /dev/null
-+++ b/tests/vircgroupdata/kubevirt.parsed
-@@ -0,0 +1,10 @@
-+cpu          /sys/fs/cgroup/cpu
-+cpuacct      /sys/fs/cgroup/cpuacct
-+cpuset       /sys/fs/cgroup/cpuset
-+memory       /sys/fs/cgroup/memory
-+devices      /sys/fs/cgroup/devices
-+freezer      /some/random/location/freezer
-+blkio        /sys/fs/cgroup/blkio
-+net_cls      <null>
-+perf_event   /sys/fs/cgroup/perf_event
-+name=systemd <null>
-diff --git a/tests/vircgrouptest.c b/tests/vircgrouptest.c
-index f55ef74a1..cf0315f16 100644
---- a/tests/vircgrouptest.c
-+++ b/tests/vircgrouptest.c
-@@ -885,6 +885,7 @@ mymain(void)
-     DETECT_MOUNTS("cgroups3");
-     DETECT_MOUNTS("all-in-one");
-     DETECT_MOUNTS("no-cgroups");
-+    DETECT_MOUNTS("kubevirt");
- 
-     if (virTestRun("New cgroup for self", testCgroupNewForSelf, NULL) < 0)
-         ret = -1;

0004-docs-schema-make-disk-driver-name-attribute-optional.patch

@@ -1,53 +0,0 @@
-From: Jim Fehlig <jfehlig@suse.com>
-Date: Tue, 18 Jul 2017 10:20:35 -0600
-Subject: [PATCH] docs: schema: make disk driver name attribute optional
-
-/domain/devices/disk/driver/@name is not a required or mandatory
-attribute according to formatdomain, and indeed it was agreed on
-IRC that the attribute is "optional for input, recommended (but
-not required) for output". Currently the schema requires the
-attribute, causing virt-xml-validate to fail on disk config where
-the driver name is not explicitly specified. E.g.
-
-# cat test.xml | grep -A 5 cdrom
-    <disk type='file' device='cdrom'>
-      <driver type='raw'/>
-      <target dev='hdb' bus='ide'/>
-      <readonly/>
-      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
-    </disk>
-
-# virt-xml-validate test.xml
-Relax-NG validity error : Extra element devices in interleave
-test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content
-test.xml fails to validate
-
-Relaxing the name attribute to be optional fixes the validation
-
-# virt-xml-validate test.xml
-test.xml validates
-
-(cherry picked from commit b494e09d058f09b48d0fd8855edd557101294671)
----
- docs/schemas/domaincommon.rng | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/docs/schemas/domaincommon.rng b/docs/schemas/domaincommon.rng
-index 9a7d03ed9..38dda780e 100644
---- a/docs/schemas/domaincommon.rng
-+++ b/docs/schemas/domaincommon.rng
-@@ -1670,9 +1670,11 @@
-     </element>
-   </define>
-   <define name="driverFormat">
--    <attribute name="name">
--      <ref name="genericName"/>
--    </attribute>
-+    <optional>
-+      <attribute name="name">
-+        <ref name="genericName"/>
-+      </attribute>
-+    </optional>
-     <optional>
-       <attribute name='type'>
-         <choice>

Makefile

@@ -4,7 +4,7 @@ NAME := libvirt
 SPECFILE = $(firstword $(wildcard *.spec))
 
 define find-makefile-common
-for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$d/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
+for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
 endef
 
 MAKEFILE_COMMON := $(shell $(find-makefile-common))

branch

@@ -0,0 +1 @@
+F-12

libvirt-change-logrotate-config-to-weekly.patch

@@ -0,0 +1,34 @@
+From bcd4180124afa20580d720912e2179b3a2f9295a Mon Sep 17 00:00:00 2001
+From: Daniel Veillard <veillard@redhat.com>
+Date: Mon, 5 Oct 2009 17:03:14 +0200
+Subject: [PATCH] 526769 change logrotate config default to weekly
+
+* daemon/libvirtd.logrotate.in: change to weekly rotation of logs,
+  keep a month worth of data and also extend to cover LXC and UML
+  domain logs
+
+(cherry picked from commit 529325bbdd050af89bda5a5c1a01b5553c49a57e)
+
+Fedora-patch: libvirt-change-logrotate-config-to-weekly.patch
+---
+ qemud/libvirtd.logrotate.in |    6 +++---
+ 1 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/qemud/libvirtd.logrotate.in b/qemud/libvirtd.logrotate.in
+index 9b42630..093651c 100644
+--- a/qemud/libvirtd.logrotate.in
++++ b/qemud/libvirtd.logrotate.in
+@@ -1,7 +1,7 @@
+-@localstatedir@/log/libvirt/qemu/*.log {
+-        daily
++@localstatedir@/log/libvirt/qemu/*.log @localstatedir@/log/libvirt/uml/*.log @localstatedir@/log/libvirt/lxc/*.log {
++        weekly
+         missingok
+-        rotate 7
++        rotate 4
+         compress
+         delaycompress
+         copytruncate
+-- 
+1.6.2.5
+

libvirt-disable-audio-backend.patch

@@ -0,0 +1,77 @@
+From 4721ceb9b85daabe53804627473b06ced821c695 Mon Sep 17 00:00:00 2001
+From: Daniel P. Berrange <berrange@redhat.com>
+Date: Mon, 14 Sep 2009 11:23:20 +0100
+Subject: [PATCH] Allow control over QEMU audio backend
+
+When using VNC for graphics + keyboard + mouse, we shouldn't
+then use the host OS for audio. Audio should go back over
+VNC.
+
+When using SDL for graphics, we should use the host OS for
+audio since that's where the display is. We need to allow
+certain QEMU env variables to be passed through to guest
+too to allow choice of QEMU audio backend.
+
+* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
+* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
+  disable host audio for VNC display
+
+(cherry picked from commit b08e6d38ae7a0ed70300d7d82107f83fddb60f44)
+
+Fedora-patch: libvirt-disable-audio-backend.patch
+---
+ qemud/libvirtd.sysconf |    8 ++++++++
+ src/qemu_conf.c        |   14 ++++++++++++++
+ 2 files changed, 22 insertions(+), 0 deletions(-)
+
+diff --git a/qemud/libvirtd.sysconf b/qemud/libvirtd.sysconf
+index fe4596a..28080a0 100644
+--- a/qemud/libvirtd.sysconf
++++ b/qemud/libvirtd.sysconf
+@@ -7,3 +7,11 @@
+ 
+ # Override Kerberos service keytab for SASL/GSSAPI
+ #KRB5_KTNAME=/etc/libvirt/krb5.tab
++
++# Override the QEMU/SDL default audio driver probing when
++# starting virtual machines using SDL graphics
++#
++# NB these have no effect for VMs using VNC
++#QEMU_AUDIO_DRV=sdl
++#
++#SDL_AUDIODRIVER=pulse
+diff --git a/src/qemu_conf.c b/src/qemu_conf.c
+index f92bcef..0dd0624 100644
+--- a/src/qemu_conf.c
++++ b/src/qemu_conf.c
+@@ -2109,6 +2109,13 @@ int qemudBuildCommandLine(virConnectPtr conn,
+             ADD_ARG_LIT("-k");
+             ADD_ARG_LIT(def->graphics[0]->data.vnc.keymap);
+         }
++
++        /* QEMU implements a VNC extension for providing audio, so we
++         * set the audio backend to none, to prevent it opening the
++         * host OS audio devices since that causes security issues
++         * and is non-sensical when using VNC.
++         */
++        ADD_ENV_LIT("QEMU_AUDIO_DRV=none");
+     } else if ((def->ngraphics == 1) &&
+                def->graphics[0]->type == VIR_DOMAIN_GRAPHICS_TYPE_SDL) {
+         char *xauth = NULL;
+@@ -2131,6 +2138,13 @@ int qemudBuildCommandLine(virConnectPtr conn,
+             ADD_ENV(display);
+         if (def->graphics[0]->data.sdl.fullscreen)
+             ADD_ARG_LIT("-full-screen");
++
++        /* If using SDL for video, then we should just let it
++         * use QEMU's host audio drivers, possibly SDL too
++         * User can set these two before starting libvirtd
++         */
++        ADD_ENV_COPY("QEMU_AUDIO_DRV");
++        ADD_ENV_COPY("SDL_AUDIODRIVER");
+     }
+ 
+     if (def->nvideos) {
+-- 
+1.6.2.5
+

libvirt-fix-drv-supports-feature-bogus-error.patch

@@ -0,0 +1,32 @@
+From 7692e1e19487c28454b1e5f6488d5574c70883f2 Mon Sep 17 00:00:00 2001
+From: Chris Lalancette <clalance@redhat.com>
+Date: Mon, 21 Sep 2009 14:53:31 +0200
+Subject: [PATCH] Don't do virSetConnError when virDrvSupportsFeature is successful.
+
+Signed-off-by: Chris Lalancette <clalance@redhat.com>
+Fedora-patch: libvirt-fix-drv-supports-feature-bogus-error.patch
+---
+ src/libvirt.c |    7 +++++--
+ 1 files changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/src/libvirt.c b/src/libvirt.c
+index 4a11688..fa59dc7 100644
+--- a/src/libvirt.c
++++ b/src/libvirt.c
+@@ -1349,8 +1349,11 @@ virDrvSupportsFeature (virConnectPtr conn, int feature)
+     }
+ 
+     ret = VIR_DRV_SUPPORTS_FEATURE (conn->driver, conn, feature);
+-    /* Copy to connection error object for back compatability */
+-    virSetConnError(conn);
++
++    if (ret < 0)
++        /* Copy to connection error object for back compatability */
++        virSetConnError(conn);
++
+     return ret;
+ }
+ 
+-- 
+1.6.2.5
+

libvirt-fix-net-hotunplug-double-free.patch

@@ -0,0 +1,46 @@
+From ba585ed6cff624c6c0f1f9801382fd6846466ee0 Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Thu, 17 Sep 2009 15:31:08 +0100
+Subject: [PATCH] Fix net/disk hot-unplug segfault
+
+When we hot-unplug the last device, we're currently double-freeing
+the device definition.
+
+Reported by Michal Nowak here:
+
+  https://bugzilla.redhat.com/523953
+
+* src/qemu_driver.c: fix double free
+
+(cherry-picked from commit 8881ae1bf8783006777429403cc543c33187175d)
+
+Fedora-patch: libvirt-fix-net-hotunplug-double-free.patch
+---
+ src/qemu_driver.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index a65334f..de31581 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -5998,7 +5998,7 @@ try_command:
+             /* ignore, harmless */
+         }
+     } else {
+-        VIR_FREE(vm->def->disks[0]);
++        VIR_FREE(vm->def->disks);
+         vm->def->ndisks = 0;
+     }
+     virDomainDiskDefFree(detach);
+@@ -6100,7 +6100,7 @@ qemudDomainDetachNetDevice(virConnectPtr conn,
+             /* ignore, harmless */
+         }
+     } else {
+-        VIR_FREE(vm->def->nets[0]);
++        VIR_FREE(vm->def->nets);
+         vm->def->nnets = 0;
+     }
+     virDomainNetDefFree(detach);
+-- 
+1.6.2.5
+

libvirt-fix-pci-hostdev-hotunplug-leak.patch

@@ -0,0 +1,50 @@
+From 17831d20051f8de8f1f7d661e8a23f4fe67c2153 Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Thu, 17 Sep 2009 15:32:45 +0100
+Subject: [PATCH] Fix leak in PCI hostdev hot-unplug
+
+* src/qemu_driver.c: sync the hostdev hot-unplug code with the disk/net
+  code.
+
+(cherry-picked from commit a70da51ff76ed860bfc0cdee2e1d556da997c557)
+
+Fedora-patch: libvirt-fix-pci-hostdev-hotunplug-leak.patch
+---
+ src/qemu_driver.c |   20 +++++++++++++-------
+ 1 files changed, 13 insertions(+), 7 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index de31581..2ddcdc0 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -6206,14 +6206,20 @@ static int qemudDomainDetachHostPciDevice(virConnectPtr conn,
+         pciFreeDevice(conn, pci);
+     }
+ 
+-    if (i != --vm->def->nhostdevs)
+-        memmove(&vm->def->hostdevs[i],
+-                &vm->def->hostdevs[i+1],
+-                sizeof(*vm->def->hostdevs) * (vm->def->nhostdevs-i));
+-    if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs) < 0) {
+-        virReportOOMError(conn);
+-        ret = -1;
++    if (vm->def->nhostdevs > 1) {
++        memmove(vm->def->hostdevs + i,
++                vm->def->hostdevs + i + 1,
++                sizeof(*vm->def->hostdevs) *
++                (vm->def->nhostdevs - (i + 1)));
++        vm->def->nhostdevs--;
++        if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs) < 0) {
++            /* ignore, harmless */
++        }
++    } else {
++        VIR_FREE(vm->def->hostdevs);
++        vm->def->nhostdevs = 0;
+     }
++    virDomainHostdevDefFree(detach);
+ 
+     return ret;
+ }
+-- 
+1.6.2.5
+

libvirt-fix-qemu-raw-format-save.patch

@@ -0,0 +1,53 @@
+From f1be5a4714e194a84840343e0937fe62463a18dc Mon Sep 17 00:00:00 2001
+From: Charles Duffy <Charles_Duffy@dell.com>
+Date: Fri, 18 Sep 2009 11:32:35 -0500
+Subject: [PATCH] Prevent attempt to call cat -c during virDomainSave to raw
+
+Fedora-patch: libvirt-fix-qemu-raw-format-save.patch
+---
+ src/qemu_driver.c |   28 ++++++++++++++++++----------
+ 1 files changed, 18 insertions(+), 10 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index 2ddcdc0..7c7b985 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -3905,17 +3905,25 @@ static int qemudDomainSave(virDomainPtr dom,
+         goto cleanup;
+     }
+ 
+-    const char *prog = qemudSaveCompressionTypeToString(header.compressed);
+-    if (prog == NULL) {
+-        qemudReportError(dom->conn, dom, NULL, VIR_ERR_INTERNAL_ERROR,
+-                         _("Invalid compress format %d"), header.compressed);
+-        goto cleanup;
+-    }
++    {
++        const char *prog = qemudSaveCompressionTypeToString(header.compressed);
++        const char *args;
+ 
+-    if (STREQ (prog, "raw"))
+-        prog = "cat";
+-    internalret = virAsprintf(&command, "migrate \"exec:"
+-                              "%s -c >> '%s' 2>/dev/null\"", prog, safe_path);
++        if (prog == NULL) {
++            qemudReportError(dom->conn, dom, NULL, VIR_ERR_INTERNAL_ERROR,
++                             _("Invalid compress format %d"), header.compressed);
++            goto cleanup;
++        }
++
++        if (STREQ (prog, "raw")) {
++            prog = "cat";
++            args = "";
++        } else {
++            args = "-c";
++        }
++        internalret = virAsprintf(&command, "migrate \"exec:"
++                                  "%s %s >> '%s' 2>/dev/null\"", prog, args, safe_path);
++    }
+ 
+     if (internalret < 0) {
+         virReportOOMError(dom->conn);
+-- 
+1.6.2.5
+

libvirt-fix-usb-device-passthrough.patch

@@ -0,0 +1,41 @@
+From 6b12148864cf6a1d22a2cf4e0e9c48e9946331cb Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Wed, 30 Sep 2009 18:37:03 +0100
+Subject: [PATCH] Fix USB device re-labelling
+
+A simple misplaced break out of a switch results in:
+
+  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
+  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
+  libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
+
+when trying to passthrough a USB host device to qemu.
+
+* src/security_selinux.c: fix a switch/break thinko
+
+Fedora-patch: libvirt-fix-usb-device-passthrough.patch
+---
+ src/security_selinux.c |    3 +--
+ 1 files changed, 1 insertions(+), 2 deletions(-)
+
+diff --git a/src/security_selinux.c b/src/security_selinux.c
+index bc295b1..b4dc153 100644
+--- a/src/security_selinux.c
++++ b/src/security_selinux.c
+@@ -464,12 +464,11 @@ SELinuxSetSecurityHostdevLabel(virConnectPtr conn,
+ 
+             ret = usbDeviceFileIterate(conn, usb, SELinuxSetSecurityUSBLabel, vm);
+             usbFreeDevice(conn, usb);
+-
+-            break;
+         } else {
+             /* XXX deal with product/vendor better */
+             ret = 0;
+         }
++        break;
+     }
+ 
+     case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: {
+-- 
+1.6.2.5
+

sources

@@ -1 +1 @@
-SHA512 (libvirt-2.2.1.tar.xz) = b89a2665bea81c440afc3f9f69c26e314344f1f2fbf53f82b25bdddcc89532ddf3393902e9cf552edb827ce5d8b46b9214b5a25303b19cf0f3f085131d870518
+f1cd360a5da38b847e166c6482141940  libvirt-0.7.1.tar.gz