3.9.1-0, again

-  temporarily (or is it?) remove qt5 sub-package. Will epel10 get qt5?
-  temporarily remove test w/ xvfb-run until I can figure out the
   proper replacement.
-  inkscape seems to not be needed. Or am I wrong about that? It builds
   without it as a BR. Will add it back when inkscape is built for EPEL10.

.gitignore

@@ -0,0 +1,114 @@
+matplotlib-1.0.0-without-gpc.tar.gz
+/matplotlib-1.0.1-without-gpc.tar.gz
+/mpl_sampledata-1.0.1.tar.gz
+/matplotlib-1.2.0-without-gpc.tar.gz
+/matplotlib-1.3.0-without-gpc.tar.xz
+/matplotlib-1.3.1-without-gpc.tar.xz
+/matplotlib-1.4.3-without-gpc.tar.xz
+/matplotlib-1.4.3-without-extern.tar.xz
+/matplotlib-1.5.1-without-extern.tar.xz
+/matplotlib-1.5.1.tar.gz
+/matplotlib-1.5.2rc2.tar.gz
+/matplotlib-2.0.0b4.tar.gz
+/matplotlib-2.0.0rc2.tar.gz
+/matplotlib-2.0.0.tar.gz
+/matplotlib-2.0.0-without-copyrighted.tar.xz
+/matplotlib-2.0.1.tar.gz
+/matplotlib-2.0.2.tar.gz
+/matplotlib-2.1.0rc1.tar.gz
+/matplotlib-2.1.0.tar.gz
+/matplotlib-2.1.1.tar.gz
+/matplotlib-2.1.2.tar.gz
+/matplotlib-2.1.2-with-freetype-2.8.tar.gz
+/matplotlib-2.2.2.tar.gz
+/matplotlib-2.2.2-with-freetype-2.8.tar.gz
+/matplotlib-2.2.2-with-freetype-2.9.tar.gz
+/matplotlib-2.2.3.tar.gz
+/matplotlib-2.2.3-with-freetype-2.8.tar.gz
+/matplotlib-2.2.3-with-freetype-2.9.1.tar.gz
+/matplotlib-3.0.0rc1.tar.gz
+/matplotlib-3.0.0rc1-with-freetype-2.9.1.tar.gz
+/matplotlib-3.0.0rc2.tar.gz
+/matplotlib-3.0.0rc2-with-freetype-2.9.1.tar.gz
+/matplotlib-3.0.0.tar.gz
+/matplotlib-3.0.0-with-freetype-2.9.1.tar.gz
+/matplotlib-3.0.1.tar.gz
+/matplotlib-3.0.1-with-freetype-2.9.1.tar.gz
+/matplotlib-3.0.2.tar.gz
+/matplotlib-3.0.3.tar.gz
+/matplotlib-3.1.0rc1.tar.gz
+/matplotlib-3.1.0.tar.gz
+/matplotlib-3.1.0-with-freetype-2.10.0.tar.gz
+/matplotlib-3.1.1.tar.gz
+/matplotlib-3.1.1-with-freetype-2.10.0.tar.gz
+/matplotlib-3.1.2.tar.gz
+/matplotlib-3.2.0rc3.tar.gz
+/matplotlib-3.2.0rc3-with-freetype-2.10.1.tar.gz
+/matplotlib-3.2.0.tar.gz
+/matplotlib-3.2.0-with-freetype-2.10.1.tar.gz
+/matplotlib-3.2.1.tar.gz
+/matplotlib-3.2.2.tar.gz
+/matplotlib-3.2.2-with-freetype-2.10.1.tar.gz
+/matplotlib-3.3.0rc1.tar.gz
+/matplotlib-3.3.0rc1-with-freetype-2.10.1.tar.gz
+/matplotlib-3.3.0.tar.gz
+/matplotlib-3.3.0-with-freetype-2.10.2.tar.gz
+/matplotlib-3.3.1.tar.gz
+/matplotlib-3.3.2.tar.gz
+/matplotlib-3.3.3.tar.gz
+/matplotlib-3.3.3-with-freetype-2.10.4.tar.gz
+/matplotlib-3.3.4.tar.gz
+/matplotlib-3.4.0rc1.tar.gz
+/matplotlib-3.4.0rc1-with-freetype-2.10.4.tar.gz
+/matplotlib-3.4.0rc3.tar.gz
+/matplotlib-3.4.1.tar.gz
+/matplotlib-3.4.1-with-freetype-2.10.4.tar.gz
+/matplotlib-3.4.2.tar.gz
+/matplotlib-3.4.1-with-freetype-2.11.0.tar.gz
+/matplotlib-3.4.3.tar.gz
+/matplotlib-3.4.3-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.0b1.tar.gz
+/matplotlib-3.5.0b1-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.0rc1.tar.gz
+/matplotlib-3.5.0rc1-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.0.tar.gz
+/matplotlib-3.5.0-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.1.tar.gz
+/matplotlib-3.5.1-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.2.tar.gz
+/matplotlib-3.5.2-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.3.tar.gz
+/matplotlib-3.5.3-with-freetype-2.11.0.tar.gz
+/matplotlib-3.5.3-with-freetype-2.12.1.tar.gz
+/matplotlib-3.6.0rc1.tar.gz
+/matplotlib-3.6.0rc1-with-freetype-2.12.1.tar.gz
+/matplotlib-3.6.0rc2.tar.gz
+/matplotlib-3.6.0rc2-with-freetype-2.12.1.tar.gz
+/matplotlib-3.6.0.tar.gz
+/matplotlib-3.6.0-with-freetype-2.12.1.tar.gz
+/matplotlib-3.6.1.tar.gz
+/matplotlib-3.6.1-with-freetype-2.12.1.tar.gz
+/matplotlib-3.6.2.tar.gz
+/matplotlib-3.6.3.tar.gz
+/matplotlib-3.7.0rc1.tar.gz
+/matplotlib-3.7.0rc1-with-freetype-2.12.1.tar.gz
+/matplotlib-3.7.0.tar.gz
+/matplotlib-3.7.0-with-freetype-2.12.1.tar.gz
+/matplotlib-3.7.1.tar.gz
+/matplotlib-3.7.1-with-freetype-2.12.1.tar.gz
+/matplotlib-3.7.2.tar.gz
+/matplotlib-3.7.2-with-freetype-2.13.1.tar.gz
+/matplotlib-3.8.0rc1.tar.gz
+/matplotlib-3.8.0rc1-with-freetype-2.13.1.tar.gz
+/matplotlib-3.8.0.tar.gz
+/matplotlib-3.8.0-with-freetype-2.13.1.tar.gz
+/matplotlib-3.8.1.tar.gz
+/matplotlib-3.8.1-with-freetype-2.13.1.tar.gz
+/matplotlib-3.8.2.tar.gz
+/matplotlib-3.8.3.tar.gz
+/matplotlib-3.8.3-with-freetype-2.13.1.tar.gz
+/matplotlib-3.8.4.tar.gz
+/matplotlib-3.9.0.tar.gz
+/matplotlib-3.9.0-with-freetype-2.13.1.tar.gz
+/matplotlib-3.9.1.tar.gz
+/matplotlib-3.9.1-with-freetype-2.13.1.tar.gz

0001-matplotlibrc-path-search-fix.patch

@@ -0,0 +1,43 @@
+From 7aa7b4d240236c0660be400a7a9ef7d5837e6d47 Mon Sep 17 00:00:00 2001
+From: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+Date: Wed, 27 Sep 2017 19:35:59 -0400
+Subject: [PATCH 1/4] matplotlibrc path search fix
+
+Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+---
+ lib/matplotlib/__init__.py | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/lib/matplotlib/__init__.py b/lib/matplotlib/__init__.py
+index 9e9325a27d..346e3d3454 100644
+--- a/lib/matplotlib/__init__.py
++++ b/lib/matplotlib/__init__.py
+@@ -586,7 +586,8 @@ def get_cachedir():
+ @_logged_cached('matplotlib data path: %s')
+ def get_data_path():
+     """Return the path to Matplotlib data."""
+-    return str(Path(__file__).with_name("mpl-data"))
++    return str(Path(__file__).parent.parent.parent.parent.parent /
++               'share/matplotlib/mpl-data')
+ 
+ 
+ def matplotlib_fname():
+@@ -606,6 +607,7 @@ def matplotlib_fname():
+           is not defined)
+     - On other platforms,
+       - ``$HOME/.matplotlib/matplotlibrc`` if ``$HOME`` is defined
++    - ``/etc/matplotlibrc``
+     - Lastly, it looks in ``$MATPLOTLIBDATA/matplotlibrc``, which should always
+       exist.
+     """
+@@ -624,6 +626,7 @@ def matplotlib_fname():
+             yield matplotlibrc
+             yield os.path.join(matplotlibrc, 'matplotlibrc')
+         yield os.path.join(get_configdir(), 'matplotlibrc')
++        yield '/etc/matplotlibrc'
+         yield os.path.join(get_data_path(), 'matplotlibrc')
+ 
+     for fname in gen_candidates():
+-- 
+2.44.0
+

0002-Unpin-NumPy-build-requirement.patch

@@ -0,0 +1,41 @@
+From 6caae8127c121be0ad36e0e7b47518519543dffd Mon Sep 17 00:00:00 2001
+From: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+Date: Fri, 11 Aug 2023 02:36:06 -0400
+Subject: [PATCH 2/4] Unpin NumPy build requirement
+
+This is so high simply to take advantage of the new
+backwards-compatibility guarantee in NumPy 1.25, but Fedora will never
+run against a version different from the one it was built against.
+
+Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+---
+ pyproject.toml | 13 +------------
+ 1 file changed, 1 insertion(+), 12 deletions(-)
+
+diff --git a/pyproject.toml b/pyproject.toml
+index fe75b325dc..4c34fa395f 100644
+--- a/pyproject.toml
++++ b/pyproject.toml
+@@ -75,18 +75,7 @@ requires = [
+     "meson-python>=0.13.1",
+     "pybind11>=2.6",
+     "setuptools_scm>=7",
+-
+-    # Comments on numpy build requirement range:
+-    #
+-    #   1. >=2.0.x is the numpy requirement for wheel builds for distribution
+-    #      on PyPI - building against 2.x yields wheels that are also
+-    #      ABI-compatible with numpy 1.x at runtime.
+-    #   2. Note that building against numpy 1.x works fine too - users and
+-    #      redistributors can do this by installing the numpy version they like
+-    #      and disabling build isolation.
+-    #   3. The <2.3 upper bound is for matching the numpy deprecation policy,
+-    #      it should not be loosened.
+-    "numpy>=2.0.0rc1,<2.3",
++    "numpy",
+ ]
+ 
+ [tool.meson-python.args]
+-- 
+2.44.0
+

0003-Set-FreeType-version-to-2.13.1-and-update-tolerances.patch

@@ -0,0 +1,171 @@
+From d2ce17b7096e9f83f9ba4ac37052fe5d2e07f223 Mon Sep 17 00:00:00 2001
+From: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+Date: Fri, 14 Feb 2020 06:05:42 -0500
+Subject: [PATCH 3/4] Set FreeType version to 2.13.1 and update tolerances
+
+Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+---
+ extern/meson.build                             |  2 +-
+ lib/matplotlib/__init__.py                     |  2 +-
+ lib/matplotlib/tests/test_axes.py              |  4 ++--
+ lib/matplotlib/tests/test_backend_pgf.py       |  2 +-
+ lib/matplotlib/tests/test_constrainedlayout.py | 10 +++++-----
+ lib/matplotlib/tests/test_legend.py            |  4 ++--
+ lib/matplotlib/tests/test_polar.py             |  2 +-
+ lib/matplotlib/tests/test_tightlayout.py       | 10 +++++-----
+ 8 files changed, 18 insertions(+), 18 deletions(-)
+
+diff --git a/extern/meson.build b/extern/meson.build
+index 662feb7872..df42b908af 100644
+--- a/extern/meson.build
++++ b/extern/meson.build
+@@ -14,7 +14,7 @@ else
+   # must match the value in `lib/matplotlib.__init__.py`. Also update the docs
+   # in `docs/devel/dependencies.rst`. Bump the cache key in
+   # `.circleci/config.yml` when changing requirements.
+-  LOCAL_FREETYPE_VERSION = '2.6.1'
++  LOCAL_FREETYPE_VERSION = '2.13.1'
+ 
+   freetype_proj = subproject(
+     f'freetype-@LOCAL_FREETYPE_VERSION@',
+diff --git a/lib/matplotlib/__init__.py b/lib/matplotlib/__init__.py
+index 346e3d3454..ebf5818417 100644
+--- a/lib/matplotlib/__init__.py
++++ b/lib/matplotlib/__init__.py
+@@ -1313,7 +1313,7 @@ def _val_or_rc(val, rc_name):
+ def _init_tests():
+     # The version of FreeType to install locally for running the tests. This must match
+     # the value in `meson.build`.
+-    LOCAL_FREETYPE_VERSION = '2.6.1'
++    LOCAL_FREETYPE_VERSION = '2.13.1'
+ 
+     from matplotlib import ft2font
+     if (ft2font.__freetype_version__ != LOCAL_FREETYPE_VERSION or
+diff --git a/lib/matplotlib/tests/test_axes.py b/lib/matplotlib/tests/test_axes.py
+index 0ed5a11c13..ee220f1854 100644
+--- a/lib/matplotlib/tests/test_axes.py
++++ b/lib/matplotlib/tests/test_axes.py
+@@ -7714,7 +7714,7 @@ def test_normal_axes():
+     ]
+     for nn, b in enumerate(bbaxis):
+         targetbb = mtransforms.Bbox.from_bounds(*target[nn])
+-        assert_array_almost_equal(b.bounds, targetbb.bounds, decimal=2)
++        assert_array_almost_equal(b.bounds, targetbb.bounds, decimal=0)
+ 
+     target = [
+         [150.0, 119.999, 930.0, 11.111],
+@@ -7732,7 +7732,7 @@ def test_normal_axes():
+ 
+     target = [85.5138, 75.88888, 1021.11, 1017.11]
+     targetbb = mtransforms.Bbox.from_bounds(*target)
+-    assert_array_almost_equal(bbtb.bounds, targetbb.bounds, decimal=2)
++    assert_array_almost_equal(bbtb.bounds, targetbb.bounds, decimal=0)
+ 
+     # test that get_position roundtrips to get_window_extent
+     axbb = ax.get_position().transformed(fig.transFigure).bounds
+diff --git a/lib/matplotlib/tests/test_backend_pgf.py b/lib/matplotlib/tests/test_backend_pgf.py
+index 8a83515f16..26bc9d6c48 100644
+--- a/lib/matplotlib/tests/test_backend_pgf.py
++++ b/lib/matplotlib/tests/test_backend_pgf.py
+@@ -165,7 +165,7 @@ def test_pathclip():
+ # test mixed mode rendering
+ @needs_pgf_xelatex
+ @pytest.mark.backend('pgf')
+-@image_comparison(['pgf_mixedmode.pdf'], style='default')
++@image_comparison(['pgf_mixedmode.pdf'], style='default', tol=0.87)
+ def test_mixedmode():
+     mpl.rcParams.update({'font.family': 'serif', 'pgf.rcfonts': False})
+     Y, X = np.ogrid[-1:1:40j, -1:1:40j]
+diff --git a/lib/matplotlib/tests/test_constrainedlayout.py b/lib/matplotlib/tests/test_constrainedlayout.py
+index 4dc4d9501e..47a4e80bb5 100644
+--- a/lib/matplotlib/tests/test_constrainedlayout.py
++++ b/lib/matplotlib/tests/test_constrainedlayout.py
+@@ -435,7 +435,7 @@ def test_hidden_axes():
+     extents1 = np.copy(axs[0, 0].get_position().extents)
+ 
+     np.testing.assert_allclose(
+-        extents1, [0.045552, 0.543288, 0.47819, 0.982638], rtol=1e-5)
++        extents1, [0.045552, 0.543288, 0.47819, 0.982638], rtol=1e-2)
+ 
+ 
+ def test_colorbar_align():
+@@ -641,9 +641,9 @@ def test_compressed1():
+     fig.draw_without_rendering()
+ 
+     pos = axs[0, 0].get_position()
+-    np.testing.assert_allclose(pos.x0, 0.2344, atol=1e-3)
++    np.testing.assert_allclose(pos.x0, 0.2344, atol=1e-2)
+     pos = axs[0, 1].get_position()
+-    np.testing.assert_allclose(pos.x1, 0.7024, atol=1e-3)
++    np.testing.assert_allclose(pos.x1, 0.7024, atol=1e-2)
+ 
+     # wider than tall
+     fig, axs = plt.subplots(2, 3, layout='compressed',
+@@ -656,10 +656,10 @@ def test_compressed1():
+ 
+     pos = axs[0, 0].get_position()
+     np.testing.assert_allclose(pos.x0, 0.06195, atol=1e-3)
+-    np.testing.assert_allclose(pos.y1, 0.8537, atol=1e-3)
++    np.testing.assert_allclose(pos.y1, 0.8537, atol=1e-2)
+     pos = axs[1, 2].get_position()
+     np.testing.assert_allclose(pos.x1, 0.8618, atol=1e-3)
+-    np.testing.assert_allclose(pos.y0, 0.1934, atol=1e-3)
++    np.testing.assert_allclose(pos.y0, 0.1934, atol=1e-2)
+ 
+ 
+ @pytest.mark.parametrize('arg, state', [
+diff --git a/lib/matplotlib/tests/test_legend.py b/lib/matplotlib/tests/test_legend.py
+index 0353f1408b..f5b341daaa 100644
+--- a/lib/matplotlib/tests/test_legend.py
++++ b/lib/matplotlib/tests/test_legend.py
+@@ -520,9 +520,9 @@ def test_figure_legend_outside():
+         fig.draw_without_rendering()
+ 
+         assert_allclose(axs.get_window_extent().extents,
+-                        axbb[nn])
++                        axbb[nn], rtol=1)
+         assert_allclose(leg.get_window_extent().extents,
+-                        legbb[nn])
++                        legbb[nn], rtol=1)
+ 
+ 
+ @image_comparison(['legend_stackplot.png'],
+diff --git a/lib/matplotlib/tests/test_polar.py b/lib/matplotlib/tests/test_polar.py
+index 6b3c08d2eb..5160112e37 100644
+--- a/lib/matplotlib/tests/test_polar.py
++++ b/lib/matplotlib/tests/test_polar.py
+@@ -321,7 +321,7 @@ def test_get_tightbbox_polar():
+     fig.canvas.draw()
+     bb = ax.get_tightbbox(fig.canvas.get_renderer())
+     assert_allclose(
+-        bb.extents, [107.7778,  29.2778, 539.7847, 450.7222], rtol=1e-03)
++        bb.extents, [107.7778,  29.2778, 539.7847, 450.7222], rtol=1)
+ 
+ 
+ @check_figures_equal(extensions=["png"])
+diff --git a/lib/matplotlib/tests/test_tightlayout.py b/lib/matplotlib/tests/test_tightlayout.py
+index 9c654f4d1f..9678e34a80 100644
+--- a/lib/matplotlib/tests/test_tightlayout.py
++++ b/lib/matplotlib/tests/test_tightlayout.py
+@@ -174,13 +174,13 @@ def test_outward_ticks():
+     # These values were obtained after visual checking that they correspond
+     # to a tight layouting that did take the ticks into account.
+     expected = [
+-        [[0.091, 0.607], [0.433, 0.933]],
+-        [[0.579, 0.607], [0.922, 0.933]],
+-        [[0.091, 0.140], [0.433, 0.466]],
+-        [[0.579, 0.140], [0.922, 0.466]],
++        [[0.09, 0.61], [0.43, 0.93]],
++        [[0.58, 0.61], [0.92, 0.93]],
++        [[0.09, 0.14], [0.43, 0.47]],
++        [[0.58, 0.14], [0.92, 0.47]],
+     ]
+     for nn, ax in enumerate(fig.axes):
+-        assert_array_equal(np.round(ax.get_position().get_points(), 3),
++        assert_array_equal(np.round(ax.get_position().get_points(), 2),
+                            expected[nn])
+ 
+ 
+-- 
+2.44.0
+

0004-Use-old-stride_windows-implementation-on-32-bit-x86.patch

@@ -0,0 +1,84 @@
+From 0aecbcfd5fd12c79f1f71998be9f86fc4108d91d Mon Sep 17 00:00:00 2001
+From: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+Date: Mon, 22 Aug 2022 18:43:28 -0400
+Subject: [PATCH 4/4] Use old stride_windows implementation on 32-bit x86
+
+Signed-off-by: Elliott Sales de Andrade <quantum.analyst@gmail.com>
+---
+ lib/matplotlib/mlab.py | 39 +++++++++++++++++++++++++++++++++++----
+ 1 file changed, 35 insertions(+), 4 deletions(-)
+
+diff --git a/lib/matplotlib/mlab.py b/lib/matplotlib/mlab.py
+index e1f08c0da5..5c0d56c74d 100644
+--- a/lib/matplotlib/mlab.py
++++ b/lib/matplotlib/mlab.py
+@@ -49,6 +49,7 @@ Spectral functions
+ 
+ import functools
+ from numbers import Number
++import sys
+ 
+ import numpy as np
+ 
+@@ -210,6 +211,30 @@ def detrend_linear(y):
+     return y - (b*x + a)
+ 
+ 
++def _stride_windows(x, n, noverlap=0):
++    if noverlap >= n:
++        raise ValueError('noverlap must be less than n')
++    if n < 1:
++        raise ValueError('n cannot be less than 1')
++
++    x = np.asarray(x)
++
++    if n == 1 and noverlap == 0:
++        return x[np.newaxis]
++    if n > x.size:
++        raise ValueError('n cannot be greater than the length of x')
++
++    # np.lib.stride_tricks.as_strided easily leads to memory corruption for
++    # non integer shape and strides, i.e. noverlap or n. See #3845.
++    noverlap = int(noverlap)
++    n = int(n)
++
++    step = n - noverlap
++    shape = (n, (x.shape[-1]-noverlap)//step)
++    strides = (x.strides[0], step*x.strides[0])
++    return np.lib.stride_tricks.as_strided(x, shape=shape, strides=strides)
++
++
+ def _spectral_helper(x, y=None, NFFT=None, Fs=None, detrend_func=None,
+                      window=None, noverlap=None, pad_to=None,
+                      sides=None, scale_by_freq=None, mode=None):
+@@ -304,8 +329,11 @@ def _spectral_helper(x, y=None, NFFT=None, Fs=None, detrend_func=None,
+         raise ValueError(
+             "The window length must match the data's first dimension")
+ 
+-    result = np.lib.stride_tricks.sliding_window_view(
+-        x, NFFT, axis=0)[::NFFT - noverlap].T
++    if sys.maxsize > 2**32:  # NumPy version on 32-bit OOMs.
++        result = np.lib.stride_tricks.sliding_window_view(
++            x, NFFT, axis=0)[::NFFT - noverlap].T
++    else:
++        result = _stride_windows(x, NFFT, noverlap=noverlap)
+     result = detrend(result, detrend_func, axis=0)
+     result = result * window.reshape((-1, 1))
+     result = np.fft.fft(result, n=pad_to, axis=0)[:numFreqs, :]
+@@ -313,8 +341,11 @@ def _spectral_helper(x, y=None, NFFT=None, Fs=None, detrend_func=None,
+ 
+     if not same_data:
+         # if same_data is False, mode must be 'psd'
+-        resultY = np.lib.stride_tricks.sliding_window_view(
+-            y, NFFT, axis=0)[::NFFT - noverlap].T
++        if sys.maxsize > 2**32:  # NumPy version on 32-bit OOMs.
++            resultY = np.lib.stride_tricks.sliding_window_view(
++                y, NFFT, axis=0)[::NFFT - noverlap].T
++        else:
++            resultY = _stride_windows(y, NFFT, noverlap=noverlap)
+         resultY = detrend(resultY, detrend_func, axis=0)
+         resultY = resultY * window.reshape((-1, 1))
+         resultY = np.fft.fft(resultY, n=pad_to, axis=0)[:numFreqs, :]
+-- 
+2.44.0
+

changelog

@@ -0,0 +1,685 @@
+* Tue Dec 17 2024 Kaleb S. KEITHLEY <kkeithle[at]redhat.com> - 3.9.1-0
+- bootstrap epel10
+-  temporarily (or is it?) remove qt5 sub-package. Will epel10 get qt5?
+-  temporarily remove test w/ xvfb-run until I can figure out the
+   proper replacement.
+-  inkscape seems to not be needed. Or am I wrong about that? It builds 
+   without it as a BR. Will add it back when inkscape is built for EPEL10.
+
+* Fri Aug 11 2023 Tom Callaway <spot@fedoraproject.org> - 3.7.2-2
+- rebuild for new qhull
+
+* Mon Aug 09 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.2-5
+- Update test images for FreeType 2.11.0
+- Backport patch for NumPy 1.21
+
+* Fri Jul 23 2021 Fedora Release Engineering <releng@fedoraproject.org> - 3.4.2-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild
+
+* Fri Jun 04 2021 Python Maint <python-maint@redhat.com> - 3.4.2-3
+- Rebuilt for Python 3.10
+
+* Fri Jun 04 2021 Python Maint <python-maint@redhat.com> - 3.4.2-2
+- Bootstrap for Python 3.10
+
+* Fri Jun 04 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.2-2
+- Workaround failures with texlive 2021
+
+* Sat May 08 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.2-1
+- Update to latest version (#1958461)
+
+* Wed Mar 31 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.1-1
+- Update to latest version (#1943482)
+
+* Thu Mar 11 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.0~rc3-1
+- Update to latest release candidate
+
+* Fri Feb 19 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.4.0~rc1-1
+- Update to latest release candidate
+- Deprecated python3-matplotlib-qt4 subpackage
+
+* Tue Feb 16 2021 Troy Dawson <tdawson@redhat.com> - 3.3.4-3
+- Add build deps that were only getting pulled in by other dependencies
+
+* Mon Feb 01 2021 Tomas Popela <tpopela@redhat.com> - 3.3.4-2
+- Conditionalize the WX backend and disable it on RHEL 8+ as WX is not
+  available there.
+
+* Thu Jan 28 2021 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.4-1
+- Update to latest version (#1921574)
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 3.3.3-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Wed Dec 02 2020 Tomas Popela <tpopela@redhat.com> - 3.3.3-2
+- Don't build the Qt 4 backend in ELN/RHEL 9 as Qt 4 won't be available there
+  (reuse
+  https://src.fedoraproject.org/rpms/python-matplotlib/c/588e490738b06d525910f05bc1ba3f3f05ec7d50?branch=epel8)
+
+* Thu Nov 12 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.3-1
+- Update to latest version (#1897021)
+
+* Tue Sep 15 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.2-1
+- Update to latest version (#1878999)
+
+* Thu Aug 13 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.1-1
+- Update to latest version
+- Fixes RHBZ#1868838
+
+* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 3.3.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Sat Jul 18 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.0-1
+- Update to latest version
+- Fixes RHBZ#1858120
+
+* Tue Jun 30 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.0-0.2.rc1
+- Add more test dependencies
+
+* Mon Jun 29 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.3.0-0.1.rc1
+- Update to latest version
+
+* Sat Jun 20 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.2.2-1
+- Update to latest version
+
+* Mon Jun 01 2020 Miro Hrončok <mhroncok@redhat.com> - 3.2.1-2
+- Only recommend texlive-dvipng (but require it if texlive is installed) (#1509657)
+
+* Mon May 25 2020 Miro Hrončok <mhroncok@redhat.com> - 3.2.1-1.1
+- Rebuilt for Python 3.9
+
+* Wed Mar 18 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.2.1-1
+- Update to latest version
+
+* Tue Mar 03 2020 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.2.0-1
+- Update to latest version
+
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 3.1.2-1.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Fri Nov 22 2019 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.1.2-1
+- Update to latest version
+
+* Fri Sep 06 2019 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.1.1-2
+- Backport bool deprecation fix for Python 3.8
+
+* Sun Aug 18 2019 Miro Hrončok <mhroncok@redhat.com> - 3.1.1-1.1
+- Rebuilt for Python 3.8
+
+* Thu Aug 08 2019 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.1.1-1
+- Update to latest version
+
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.3-2.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Wed Jul  3 2019 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 3.0.3-2
+- Update Obsoletes to be later than the last python2 builds (#1726490)
+
+* Sat Mar 02 2019 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.0.3-1
+- Update to latest version
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.0.2-1.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Tue Nov 13 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.0.2-1
+- Update to latest version
+
+* Wed Oct 31 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.0.1-1
+- Update to latest version
+
+* Fri Sep 21 2018 Miro Hrončok <mhroncok@redhat.com> - 3.0.0-2
+- Obsolete old python-matplotlib-data* to prevent conflicts and provide an upgrade path
+
+* Wed Sep 19 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 3.0.0-1
+- Update to latest version
+- Drop Python 2 subpackages
+- Stop setting a default backend (allow Matplotlib to choose automatically)
+
+* Mon Aug 13 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.2.3-1
+- Update to latest version
+
+* Fri Jul 20 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.2.2-4
+- Don't use unversioned Python in build (#1605766)
+- Add missing texlive-cm BR
+
+* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.2.2-3.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Tue Jun 19 2018 Miro Hrončok <mhroncok@redhat.com> - 2.2.2-3
+- Rebuilt for Python 3.7
+
+* Tue Apr 17 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.2.2-2
+- Remove bytecode produced by pytest
+- Add python?-matplotlib-test-data subpackages
+
+* Sat Mar 31 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.2.2-1
+- Update to latest release
+- Run tests in parallel
+
+* Tue Mar 13 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.1.2-3
+- Cleanup spec file of old conditionals
+- Use more python2- dependencies
+
+* Mon Feb 05 2018 Karsten Hopp <karsten@redhat.com> - 2.1.2-2
+- update and fix spec file conditionals
+
+* Sun Jan 21 2018 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.1.2-1
+- Update to latest release
+
+* Sun Dec 10 2017 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.1.1-1
+- Update to latest release
+
+* Mon Oct 16 2017 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.1.0-1
+- Update to latest release
+
+* Thu Sep 28 2017 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.0.2-1
+- Update to latest release
+
+* Thu Sep 28 2017 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 2.0.1-1
+- Update to latest release
+
+* Thu Aug 03 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.0-3.2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild
+
+* Thu Jul 27 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.0-3.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild
+
+* Sun Mar 12 2017 Peter Robinson <pbrobinson@fedoraproject.org> 2.0.0-3
+- Fix NVR
+
+* Mon Mar 06 2017 Thomas Spura <tomspur@fedoraproject.org> - 2.0.0-2.2
+- Remove copyrighted file from tarball (gh-8034)
+
+* Sat Feb 11 2017 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.0-2.1
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild
+
+* Wed Jan 25 2017 Dan Horák <dan[at]danny.cz> - 2.0.0-2
+- Apply the 'aarch64' test tolerance patch on s390(x) also
+
+* Fri Jan 20 2017 Orion Poplawski <orion@cora.nwra.com> - 2.0.0-1
+- Update to 2.0.0 final
+
+* Tue Jan 10 2017 Adam Williamson <awilliam@redhat.com> - 2.0.0-0.7.rc2
+- Update to 2.0.0rc2
+- Fix more big-endian integer issues
+- Apply the 'aarch64' test tolerance patch on ppc64 also (it's affected by same issues)
+- Tweak the 'i686' test tolerance patch a bit (some errors are gone, some new ones)
+- Re-enable test suite for all arches
+- Note a remaining quasi-random test issue that causes build to fail sometimes
+
+* Mon Jan 09 2017 Adam Williamson <awilliam@redhat.com> - 2.0.0-0.6.b4
+- Fix another integer type issue which caused more issues on ppc64
+
+* Sun Jan 08 2017 Adam Williamson <awilliam@redhat.com> - 2.0.0-0.5.b4
+- Fix int type conversion error that broke text rendering on ppc64 (#1411070)
+
+* Tue Dec 13 2016 Charalampos Stratakis <cstratak@redhat.com> - 2.0.0-0.4.b4
+- Rebuild for Python 3.6
+
+* Mon Oct 24 2016 Dan Horák <dan[at]danny.cz> - 2.0.0-0.3.b4
+- disable tests on some alt-arches to unblock depending builds
+
+* Mon Sep 26 2016 Dominik Mierzejewski <rpm@greysector.net> - 2.0.0-0.2.b4
+- add missing runtime dependencies for python2 package
+
+* Sat Sep 10 2016 Dominik Mierzejewski <rpm@greysector.net> - 2.0.0-0.1.b4
+- Update to 2.0.0b4
+- Drop upstreamed or obsolete patches
+- python-cycler >= 0.10.0 is required
+- move around Requires and BRs and sort more or less alphabetically
+- don't ship baseline images for tests (like Debian)
+- Require stix fonts only when they're not bundled
+- disable HTML doc building for bootstrapping 2.0.x series
+- relax image rendering tests tolerance due to freetype version differences
+- disable some failing tests on aarch64 for now
+
+* Tue Jul 19 2016 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.5.2-0.2.rc2
+- https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages
+
+* Fri Jun 03 2016 Dominik Mierzejewski <rpm@greysector.net> - 1.5.1-7
+- Update to 1.5.2rc2.
+- Drop wrong hunk from use-system-six patch.
+- Patch new qhull paths on F25+ instead of using sed.
+- Rebase failing tests patch.
+
+* Mon May 23 2016 Dominik Mierzejewski <rpm@greysector.net> - 1.5.1-6
+- Upstream no longer ships non-free images, use pristine source.
+
+* Wed May 18 2016 Dominik Mierzejewski <rpm@greysector.net> - 1.5.1-5
+- Unbundle python-six (#1336740).
+- Run tests (and temporarily disable failing ones).
+- Use upstream-recommended way of running tests in parallel.
+- python2-cycler and -mock are required for running tests.
+
+* Sat Apr 30 2016 Ralf Corsépius <corsepiu@fedoraproject.org> - 1.5.1-4
+- Rebuild for qhull-2015.2-1.
+- Reflect qhull_a.h's location having changed.
+
+* Wed Apr 6 2016 Orion Poplawski <orion@cora.nwra.com> - 1.5.1-3
+- Add requires python-cycler
+
+* Tue Apr 05 2016 Jon Ciesla <limburgher@gmail.com> - 1.5.1-2
+- Drop agg-devel BR, fix sphinx build with python*cycler BR
+
+* Mon Apr 04 2016 Thomas Spura <tomspur@fedoraproject.org> - 1.5.1-1
+- update to 1.5.1 (#1276806)
+- Add missing requires of dvipng to python3-matplotlib (#1270202)
+- use bundled agg (#1276806)
+- Drop cxx patch (was dropped upstream)
+- Regenerate search path patch2
+
+* Mon Apr 04 2016 Thomas Spura <tomspur@fedoraproject.org> - 1.4.3-13
+- Require the qt5 subpackage from the qt4 subpackage (#1219556)
+
+* Thu Feb 04 2016 Fedora Release Engineering <releng@fedoraproject.org> - 1.4.3-12
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild
+
+* Tue Jan 12 2016 Thomas Spura <tomspur@fedoraproject.org> - 1.4.3-11
+- Fix another requires of the main package
+
+* Thu Jan 07 2016 Thomas Spura <tomspur@fedoraproject.org> - 1.4.3-10
+- Fix requiring the correct backend from the main package
+
+* Thu Jan 07 2016 Thomas Spura <tomspur@fedoraproject.org> - 1.4.3-9
+- regenerate tarball to exclude lena image (#1295174)
+
+* Sun Nov 15 2015 Thomas Spura <tomspur@fedoraproject.org> - 1.4.3-8
+- Pick upstream patch for fixing the gdk backend #1231748
+- Add python2 subpackages and use python_provide
+
+* Tue Nov 10 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.3-7
+- Rebuilt for https://fedoraproject.org/wiki/Changes/python3.5
+
+* Thu Jun 18 2015 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.4.3-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild
+
+* Sat May 02 2015 Kalev Lember <kalevlember@gmail.com> - 1.4.3-5
+- Rebuilt for GCC 5 C++11 ABI change
+
+* Wed Feb 25 2015 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.4.3-4
+- Split out python-matplotlib-gtk, python-matplotlib-gtk3,
+  python3-matplotlib-gtk3 subpackages (#1067373)
+- Add missing requirements on gtk
+
+* Tue Feb 24 2015 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.4.3-3
+- Use %%license, add skimage to build requirements
+
+* Tue Feb 17 2015 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 1.4.3-2
+- Disable Qt5 backend on Fedora <21 and RHEL
+
+* Tue Feb 17 2015 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 1.4.3-1
+- New upstream release (#1134007)
+- Add Qt5 backend
+
+* Tue Jan 13 2015 Elliott Sales de Andrade <quantum.analyst@gmail.com> - 1.4.2-1
+- Bump to new upstream release
+- Add qhull-devel to BR
+- Add six to Requires
+
+* Sun Aug 17 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.3.1-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild
+
+* Sat Jun 07 2014 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.3.1-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild
+
+* Wed May 21 2014 Jaroslav Škarvada <jskarvad@redhat.com> - 1.3.1-5
+- Rebuilt for https://fedoraproject.org/wiki/Changes/f21tcl86
+
+* Wed May 14 2014 Bohuslav Kabrda <bkabrda@redhat.com> - 1.3.1-4
+- Rebuilt for https://fedoraproject.org/wiki/Changes/Python_3.4
+
+* Tue Feb 11 2014 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.3.1-3
+- Make TkAgg the default backend
+- Remove python2 dependency from -data subpackage
+
+* Mon Jan 27 2014 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.3.1-2
+- Correct environment for and enable %%check
+- Install system wide matplotlibrc under /etc
+- Do not duplicate mpl-data for python2 and python3 packages
+- Conditionally bundle data fonts (https://fedorahosted.org/fpc/ticket/381)
+
+* Sat Jan 25 2014 Thomas Spura <tomspur@fedoraproject.org> - 1.3.1-1
+- update to 1.3.1
+- use GTKAgg as backend (#1030396, #982793, #1049624)
+- use fontconfig
+- add %%check for local testing (testing requires a display)
+
+* Wed Aug  7 2013 Thomas Spura <tomspur@fedoraproject.org> - 1.3.0-1
+- update to new version
+- use xz to compress sources
+- drop fontconfig patch (upstream)
+- drop tk patch (upstream solved build issue differently)
+- redo use system agg patch
+- delete bundled python-pycxx headers
+- fix requires of python3-matplotlib-qt (fixes #988412)
+
+* Sun Aug 04 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.2.0-15
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_20_Mass_Rebuild
+
+* Mon Jun 10 2013 Jon Ciesla <limburgher@gmail.com> - 1.2.0-14
+- agg rebuild.
+
+* Wed Apr 10 2013 Thomas Spura <tomspur@fedoraproject.org> - 1.2.0-13
+- use python3 version in python3-matplotlib-qt4 (#915727)
+- include __pycache__ files in correct subpackages on python3
+
+* Wed Apr  3 2013 Thomas Spura <tomspur@fedoraproject.org> - 1.2.0-12
+- Decode output of subprocess to utf-8 or regex will fail (#928326)
+
+* Tue Apr  2 2013 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-11
+- Make stix-fonts a requires of matplotlib (#928326)
+
+* Thu Mar 28 2013 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-10
+- Use stix fonts avoid problems with missing cm fonts (#908717)
+- Correct type mismatch in python3 font_manager (#912843, #928326)
+
+* Thu Feb 14 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.2.0-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
+
+* Wed Jan 16 2013 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-8
+- Update fontconfig patch to apply issue found by upstream
+- Update fontconfig patch to apply issue with missing afm fonts (#896182)
+
+* Wed Jan 16 2013 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-7
+- Use fontconfig by default (#885307)
+
+* Thu Jan  3 2013 David Malcolm <dmalcolm@redhat.com> - 1.2.0-6
+- remove wx support for rhel >= 7
+
+* Tue Dec 04 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-5
+- Reinstantiate wx backend for python2.x.
+- Run setup.py under xvfb-run to detect and default to gtk backend (#883502)
+- Split qt4 backend subpackage and add proper requires for it.
+- Correct wrong regex in tcl libdir patch.
+
+* Tue Nov 27 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-4
+- Obsolete python-matplotlib-wx for clean updates.
+
+* Tue Nov 27 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-3
+- Enable python 3 in fc18 as build requires are now available (#879731)
+
+* Thu Nov 22 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-2
+- Build python3 only on f19 or newer (#837156)
+- Build requires python3-six if building python3 support (#837156)
+
+* Thu Nov 22 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.2.0-1
+- Update to version 1.2.0
+- Revert to regenerate tarball with generate-tarball.sh (#837156)
+- Assume update to 1.2.0 is for recent releases
+- Remove %%defattr
+- Remove %%clean
+- Use simpler approach to build html documentation
+- Do not use custom/outdated setup.cfg
+- Put one BuildRequires per line
+- Enable python3 support
+- Cleanup spec as wx backend is no longer supported
+- Use default agg backend
+- Fix bogus dates in changelog by assuming only week day was wrong
+
+* Fri Aug 17 2012 Jerry James <loganjerry@gmail.com> - 1.1.1-1
+- Update to version 1.1.1.
+- Remove obsolete spec file elements
+- Fix sourceforge URLs
+- Allow sample data to have a different version number than the sources
+- Don't bother removing problematic file since we remove entire agg24 directory
+- Fix building with pygtk in the absence of an X server
+- Don't install license text for bundled software that we don't bundle
+
+* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.1-21
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
+
+* Tue Jul 3 2012 pcpa <paulo.cesar.pereira.de.andrade@gmail.com> - 1.1.0-1
+- Update to version 1.1.0.
+- Do not regenerate upstream tarball but remove problematic file in %%prep.
+- Remove non longer applicable/required patch0.
+- Rediff/rename -noagg patch.
+- Remove propagate-timezone-info-in-plot_date-xaxis_da patch already applied.
+- Remove tkinter patch now with critical code in a try block.
+- Remove png 1.5 patch as upstream is now png 1.5 aware.
+- Update file list.
+
+* Wed Apr 18 2012 David Malcolm <dmalcolm@redhat.com> - 1.0.1-20
+- remove wx support for rhel >= 7
+
+* Tue Feb 28 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.1-19
+- Rebuilt for c++ ABI breakage
+
+* Sat Jan 14 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.1-18
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild
+
+* Tue Dec  6 2011 David Malcolm <dmalcolm@redhat.com> - 1.0.1-17
+- fix the build against libpng 1.5
+
+* Tue Dec  6 2011 David Malcolm <dmalcolm@redhat.com> - 1.0.1-16
+- fix egg-info conditional for RHEL
+
+* Tue Dec 06 2011 Adam Jackson <ajax@redhat.com> - 1.0.1-15
+- Rebuild for new libpng
+
+* Mon Oct 31 2011 Dan Horák <dan[at]danny.cz> - 1.0.1-14
+- fix build with new Tkinter which doesn't return an expected value in __version__
+
+* Thu Sep 15 2011 Jef Spaleta <jspaleta@fedoraproject.org> - 1.0.1-13
+- apply upstream bugfix for timezone formatting (Bug 735677)
+
+* Fri May 20 2011 Orion Poplawski <orion@cora.nwra.com> - 1.0.1-12
+- Add Requires dvipng (Bug 684836)
+- Build against system agg (Bug 612807)
+- Use system pyparsing (Bug 702160)
+
+* Sat Feb 26 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-11
+- Set PYTHONPATH during html doc building using find to prevent broken builds
+
+* Sat Feb 26 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-10
+- Spec file cleanups for readability
+
+* Sat Feb 26 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-9
+- Bump and rebuild
+
+* Sat Feb 26 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-8
+- Fix spec file typos so package builds
+
+* Fri Feb 25 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-7
+- Remove a debugging echo statement from the spec file
+- Fix some line endings and permissions in -doc sub-package
+
+* Fri Feb 25 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-6
+- Spec file cleanups to silence some rpmlint warnings
+
+* Mon Feb 21 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-5
+- Add default attr to doc sub-package file list
+- No longer designate -doc subpackage as noarch
+- Add arch specific Requires for tk, wx and doc sub-packages
+
+* Mon Feb 21 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-4
+- Enable wxPython backend
+- Make -doc sub-package noarch
+
+* Mon Feb 21 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-3
+- Add conditional for optionally building doc sub-package
+- Add flag to build low res images for documentation
+- Add matplotlib-1.0.1-plot_directive.patch to fix build of low res images
+- Remove unused patches
+
+* Sat Feb 19 2011 Jonathan G. Underwood <jonathan.underwood@gmail.com> - 1.0.1-2
+- Build and package HTML documentation in -doc sub-package
+- Move examples to -doc sub-package
+- Make examples non-executable
+
+* Fri Feb 18 2011 Thomas Spura <tomspur@fedoraproject.org> - 1.0.1-1
+- update to new bugfix version (#678489)
+- set file attributes in tk subpackage
+- filter private *.so
+
+* Tue Feb 08 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.0.0-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
+
+* Thu Jul 22 2010 David Malcolm <dmalcolm@redhat.com> - 1.0.0-2
+- Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
+
+* Thu Jul 8 2010 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 1.0.0-1
+- New upstream release
+- Remove undistributable file from bundled agg library
+
+* Thu Jul 1 2010 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.99.3-1
+- New upstream release
+
+* Thu May 27 2010 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.99.1.2-4
+- Upstream patch to fix deprecated gtk tooltip warning.
+
+* Mon Apr 12 2010 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.99.1.2-2
+- Bump to rebuild against numpy 1.3
+
+* Thu Apr 1 2010 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.99.1.2-1
+- Bump to rebuild against numpy 1.4.0
+
+* Fri Dec 11 2009 Jon Ciesla <limb@jcomserv.net> - 0.99.1.2
+- Update to 0.99.1.2
+
+* Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.98.5.2-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
+
+* Fri Mar 06 2009 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.98.5-4
+- Fixed font dep after font guideline change
+
+* Thu Feb 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.98.5.2-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
+
+* Tue Dec 23 2008 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.98.5-2
+- Add dep on DejaVu Sans font for default font support
+
+* Mon Dec 22 2008 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.98.5-1
+- Latest upstream release
+- Strip out included fonts
+
+* Sat Nov 29 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 0.98.3-2
+- Rebuild for Python 2.6
+
+* Wed Aug  6 2008 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.98.3-1
+- Latest upstream release
+
+* Tue Jul  1 2008 Jef Spaleta <jspaleta AT fedoraproject DOT org> - 0.98.1-1
+- Latest upstream release
+
+* Fri Mar  21 2008 Jef Spaleta <jspaleta[AT]fedoraproject org> - 0.91.2-2
+- gcc43 cleanups
+
+* Fri Mar  21 2008 Jef Spaleta <jspaleta[AT]fedoraproject org> - 0.91.2-1
+- New upstream version
+- Adding Fedora specific setup.cfg from included template
+- removed numarry and numerics build requirements
+
+* Tue Feb 19 2008 Fedora Release Engineering <rel-eng@fedoraproject.org> - 0.90.1-6
+- Autorebuild for GCC 4.3
+
+* Fri Jan  4 2008 Alex Lancaster <alexlan[AT]fedoraproject org> - 0.90.1-5
+- Fixed typo in spec.
+
+* Fri Jan  4 2008 Alex Lancaster <alexlan[AT]fedoraproject org> - 0.90.1-4
+- Support for Python Eggs for F9+
+
+* Thu Jan  3 2008 Alex Lancaster <alexlan[AT]fedoraproject org> - 0.90.1-3
+- Rebuild for new Tcl 8.5
+
+* Thu Aug 23 2007 Orion Poplawski <orion@cora.nwra.com> 0.90.1-2
+- Update license tag to Python
+- Rebuild for BuildID
+
+* Mon Jun 04 2007 Orion Poplawski <orion@cora.nwra.com> 0.90.1-1
+- Update to 0.90.1
+
+* Wed Feb 14 2007 Orion Poplawski <orion@cora.nwra.com> 0.90.0-2
+- Rebuild for Tcl/Tk downgrade
+
+* Sat Feb 10 2007 Jef Spaleta <jspaleta@gmail.com> 0.90.0-2
+- Release bump for rebuild against new tk
+
+* Fri Feb 09 2007 Orion Poplawski <orion@cora.nwra.com> 0.90.0-1
+- Update to 0.90.0
+
+* Fri Jan  5 2007 Orion Poplawski <orion@cora.nwra.com> 0.87.7-4
+- Add examples to %%docs
+
+* Mon Dec 11 2006 Jef Spaleta <jspaleta@gmail.com> 0.87.7-3
+- Release bump for rebuild against python 2.5 in devel tree
+
+* Tue Dec  5 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.7-2
+- Force build of gtk/gtkagg backends in mock (bug #218153)
+- Change Requires from python-numeric to numpy (bug #218154)
+
+* Tue Nov 21 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.7-1
+- Update to 0.87.7 and fix up the defaults to use numpy
+- Force build of tkagg backend without X server
+- Use src.rpm from Jef Spaleta, closes bug 216578
+
+* Fri Oct  6 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.6-1
+- Update to 0.87.6
+
+* Thu Sep  7 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.5-1
+- Update to 0.87.5
+
+* Thu Jul 27 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.4-1
+- Update to 0.87.4
+
+* Wed Jun  7 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.3-1
+- Update to 0.87.3
+
+* Mon May 15 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.2-2
+- Rebuild for new numpy
+
+* Tue Mar  7 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.2-1
+- Update to 0.87.2
+
+* Tue Mar  7 2006 Orion Poplawski <orion@cora.nwra.com> 0.87.1-1
+- Update to 0.87.1
+- Add pycairo >= 1.0.2 requires (FC5+ only)
+
+* Fri Feb 24 2006 Orion Poplawski <orion@cora.nwra.com> 0.87-1
+- Update to 0.87
+- Add BR numpy and python-numarray
+- Add patch to keep Numeric as the default numerix package
+- Add BR tkinter and tk-devel for TkInter backend
+- Make separate package for Tk backend
+
+* Tue Jan 10 2006 Orion Poplawski <orion@cora.nwra.com> 0.86-1
+- Update to 0.86
+
+* Thu Dec 22 2005 Orion Poplawski <orion@cora.nwra.com> 0.85-2
+- Rebuild
+
+* Sun Nov 20 2005 Orion Poplawski <orion@cora.nwra.com> 0.85-1
+- New upstream version 0.85
+
+* Mon Sep 19 2005 Orion Poplawski <orion@cora.nwra.com> 0.84-1
+- New upstream version 0.84
+
+* Tue Aug 02 2005 Orion Poplawski <orion@cora.nwra.com> 0.83.2-3
+- bump release
+
+* Tue Aug 02 2005 Orion Poplawski <orion@cora.nwra.com> 0.83.2-2
+- Add Requires: python-numeric, pytz, python-dateutil
+
+* Fri Jul 29 2005 Orion Poplawski <orion@cora.nwra.com> 0.83.2-1
+- New upstream version matplotlib 0.83.2
+
+* Thu Jul 28 2005 Orion Poplawski <orion@cora.nwra.com> 0.83.1-2
+- Bump rel to fix botched tag
+
+* Thu Jul 28 2005 Orion Poplawski <orion@cora.nwra.com> 0.83.1-1
+- New upstream version matplotlib 0.83.1
+
+* Tue Jul 05 2005 Orion Poplawski <orion@cora.nwra.com> 0.82-4
+- BuildRequires: pytz, python-dateutil - use upstream
+- Don't use INSTALLED_FILES, list dirs
+- Fix execute permissions
+
+* Fri Jul 01 2005 Orion Poplawski <orion@cora.nwra.com> 0.82-3
+- Use %%{python_sitearch}
+
+* Thu Jun 30 2005 Orion Poplawski <orion@cora.nwra.com> 0.82-2
+- Rename to python-matplotlib
+- Remove unneeded Requires: python
+- Add private directories to %%files
+
+* Tue Jun 28 2005 Orion Poplawski <orion@cora.nwra.com> 0.82-1
+- Initial package for Fedora Extras

dead.package

@@ -1 +0,0 @@
-epel8-playground decommissioned : https://pagure.io/epel/issue/136

python-matplotlib.spec

@@ -0,0 +1,425 @@
+%bcond_with html
+%bcond_without check
+# https://fedorahosted.org/fpc/ticket/381
+%bcond_without bundled_fonts
+
+# No WX for EL8/ELN/EL9
+%if 0%{?rhel} >= 8
+%bcond_with wx
+%else
+%bcond_without wx
+%endif
+
+# the default backend; one of GTK3Agg GTK3Cairo MacOSX Qt4Agg Qt5Agg TkAgg
+# WXAgg Agg Cairo PS PDF SVG
+%global backend                 TkAgg
+
+%if "%{backend}" == "TkAgg"
+%global backend_subpackage tk
+%else
+%  if "%{backend}" == "Qt5Agg"
+%global backend_subpackage qt5
+%  else
+%    if "%{backend}" == "WXAgg"
+%global backend_subpackage wx
+%    endif
+%  endif
+%endif
+
+%global build_backend_args -Csetup-args="-Dsystem-freetype=true" -Csetup-args="-Dsystem-qhull=true" -Cinstall-args="--tags=data,python-runtime,runtime,tests"
+
+# Use the same directory of the main package for subpackage licence and docs
+%global _docdir_fmt %{name}
+
+# Updated test images for new FreeType.
+%global mpl_images_version 3.9.1
+
+# The version of FreeType in this Fedora branch.
+%global ftver 2.13.1
+
+Name:           python-matplotlib
+Version:        3.9.1
+%global Version %{version_no_tilde %{quote:%nil}}
+Release:        6%{?dist}
+Summary:        Python 2D plotting library
+# qt_editor backend is MIT
+# ResizeObserver at end of lib/matplotlib/backends/web_backend/js/mpl.js is CC0
+License:        PSF-2.0 AND MIT AND CC0-1.0
+URL:            https://matplotlib.org
+Source0:        %pypi_source matplotlib %{Version}
+
+# Fedora-specific patches; see:
+# https://github.com/fedora-python/matplotlib/tree/fedora-patches
+# Updated test images for new FreeType.
+Source1000:     https://github.com/QuLogic/mpl-images/archive/v%{mpl_images_version}-with-freetype-%{ftver}/matplotlib-%{mpl_images_version}-with-freetype-%{ftver}.tar.gz
+# Search in /etc/matplotlibrc:
+Patch1001:      0001-matplotlibrc-path-search-fix.patch
+# We don't need to use NumPy 1.25.
+Patch1002:      0002-Unpin-NumPy-build-requirement.patch
+# Increase tolerances for new FreeType everywhere:
+Patch1003:      0003-Set-FreeType-version-to-%{ftver}-and-update-tolerances.patch
+
+# https://github.com/matplotlib/matplotlib/pull/21190#issuecomment-1223271888
+Patch0001:      0004-Use-old-stride_windows-implementation-on-32-bit-x86.patch
+
+BuildRequires:  gcc
+BuildRequires:  gcc-c++
+BuildRequires:  glibc-langpack-en
+BuildRequires:  freetype-devel
+BuildRequires:  libpng-devel
+BuildRequires:  qhull-devel
+BuildRequires:	wlheadless-run
+BuildRequires:  zlib-devel
+
+BuildRequires:  ghostscript
+# No ImageMagick for EL8/ELN/EL9
+%if 0%{?fedora} || (0%{?rhel} && 0%{?rhel} < 8)
+BuildRequires:  ImageMagick
+%endif
+## BuildRequires:  inkscape
+
+BuildRequires:  font(dejavusans)
+BuildRequires:  font(notosanscjkjp)
+BuildRequires:  font(wenquanyizenhei)
+
+BuildRequires:  texlive-collection-basic
+BuildRequires:  texlive-collection-fontsrecommended
+BuildRequires:  texlive-collection-latex
+BuildRequires:  texlive-collection-latexrecommended
+BuildRequires:  texlive-dvipng
+BuildRequires:  texlive-latex-bin
+BuildRequires:  texlive-luahbtex
+BuildRequires:  texlive-tex-bin
+BuildRequires:  texlive-xetex-bin
+# Search for documentclass and add the classes here.
+BuildRequires:  tex(article.cls)
+# Search for inputenc and add any encodings used with it.
+BuildRequires:  tex(utf8.def)
+BuildRequires:  tex(utf8x.def)
+# Found with: rg -Io 'usepackage(\[.+\])?\{.+\}' lib | rg -o '\{.+\}' | sort -u
+# and then removing duplicates in one line, etc.
+BuildRequires:  tex(avant.sty)
+BuildRequires:  tex(chancery.sty)
+BuildRequires:  tex(charter.sty)
+BuildRequires:  tex(chemformula.sty)
+BuildRequires:  tex(color.sty)
+BuildRequires:  tex(courier.sty)
+BuildRequires:  tex(fontenc.sty)
+BuildRequires:  tex(fontspec.sty)
+BuildRequires:  tex(geometry.sty)
+BuildRequires:  tex(graphicx.sty)
+BuildRequires:  tex(helvet.sty)
+BuildRequires:  tex(hyperref.sty)
+BuildRequires:  tex(import.sty)
+BuildRequires:  tex(inputenc.sty)
+BuildRequires:  tex(lmodern.sty)
+BuildRequires:  tex(mathpazo.sty)
+BuildRequires:  tex(mathptmx.sty)
+BuildRequires:  tex(pgf.sty)
+BuildRequires:  tex(sfmath.sty)
+BuildRequires:  tex(textcomp.sty)
+BuildRequires:  tex(txfonts.sty)
+BuildRequires:  tex(type1cm.sty)
+BuildRequires:  tex(type1ec.sty)
+BuildRequires:  tex(underscore.sty)
+# See BakomaFonts._fontmap in lib/matplotlib/mathtext.py
+BuildRequires:  tex(cmb10.tfm)
+BuildRequires:  tex(cmex10.tfm)
+BuildRequires:  tex(cmmi10.tfm)
+BuildRequires:  tex(cmr10.tfm)
+BuildRequires:  tex(cmss10.tfm)
+BuildRequires:  tex(cmsy10.tfm)
+BuildRequires:  tex(cmtt10.tfm)
+
+%description
+Matplotlib is a Python 2D plotting library which produces publication
+quality figures in a variety of hardcopy formats and interactive
+environments across platforms. Matplotlib can be used in Python
+scripts, the Python and IPython shell, web application servers, and
+various graphical user interface toolkits.
+
+Matplotlib tries to make easy things easy and hard things possible.
+You can generate plots, histograms, power spectra, bar charts,
+errorcharts, scatterplots, etc, with just a few lines of code.
+
+%package -n python3-matplotlib-data
+Summary:        Data used by python-matplotlib
+BuildArch:      noarch
+%if %{with bundled_fonts}
+Requires:       python3-matplotlib-data-fonts = %{version}-%{release}
+%endif
+Obsoletes:      python-matplotlib-data < 3
+
+%description -n python3-matplotlib-data
+%{summary}
+
+%if %{with bundled_fonts}
+%package -n python3-matplotlib-data-fonts
+Summary:        Fonts used by python-matplotlib
+# Carlogo, STIX and Computer Modern is OFL
+# DejaVu is Bitstream Vera and Public Domain
+License:        OFL-1.1 and Bitstream-Vera and LicenseRef-Fedora-Public-Domain
+BuildArch:      noarch
+Requires:       python3-matplotlib-data = %{version}-%{release}
+Obsoletes:      python-matplotlib-data-fonts < 3
+
+%description -n python3-matplotlib-data-fonts
+%{summary}
+%endif
+
+%package -n     python3-matplotlib
+Summary:        Python 2D plotting library
+BuildRequires:  python3-devel
+BuildRequires:  python3dist(pycairo)
+BuildRequires:  python3dist(pytz)
+BuildRequires:  python3dist(sphinx)
+Requires:       dejavu-sans-fonts
+Recommends:     texlive-dvipng
+Requires:       (texlive-dvipng if texlive-base)
+Requires:       python3-matplotlib-data = %{version}-%{release}
+Requires:       python3dist(pycairo)
+Requires:       python3-matplotlib-%{?backend_subpackage}%{!?backend_subpackage:tk}%{?_isa} = %{version}-%{release}
+%if %{with check}
+BuildRequires:  python3dist(pytest)
+BuildRequires:  python3dist(pytest-rerunfailures)
+BuildRequires:  python3dist(pytest-timeout)
+BuildRequires:  python3dist(pytest-xdist)
+BuildRequires:  python3dist(pikepdf)
+%endif
+%if %{without bundled_fonts}
+Requires:       stix-math-fonts
+%else
+Provides:       bundled(stix-math-fonts)
+%endif
+
+%description -n python3-matplotlib
+Matplotlib is a Python 2D plotting library which produces publication
+quality figures in a variety of hardcopy formats and interactive
+environments across platforms. Matplotlib can be used in Python
+scripts, the Python and IPython shell, web application servers, and
+various graphical user interface toolkits.
+
+Matplotlib tries to make easy things easy and hard things possible.
+You can generate plots, histograms, power spectra, bar charts,
+errorcharts, scatterplots, etc, with just a few lines of code.
+
+%package -n     python3-matplotlib-qt6
+Summary:        Qt6 backend for python3-matplotlib
+BuildRequires:  python3dist(cairocffi)
+BuildRequires:  python3dist(pyqt6)
+BuildRequires:  python3-pyqt6
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+Requires:       python3dist(cairocffi)
+Requires:       python3dist(pyqt6)
+
+%description -n python3-matplotlib-qt6
+%{summary}
+
+%package -n     python3-matplotlib-gtk3
+Summary:        GTK3 backend for python3-matplotlib
+# This should be converted to typelib(Gtk) when supported
+BuildRequires:  gtk3
+BuildRequires:  python3-gobject
+Requires:       gtk3%{?_isa}
+Requires:       python3-gobject%{?_isa}
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+
+%description -n python3-matplotlib-gtk3
+%{summary}
+
+%package -n     python3-matplotlib-gtk4
+Summary:        GTK4 backend for python3-matplotlib
+# This should be converted to typelib(Gtk) when supported
+BuildRequires:  gtk4
+BuildRequires:  python3-gobject
+Requires:       gtk4%{?_isa}
+Requires:       python3-gobject%{?_isa}
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+
+%description -n python3-matplotlib-gtk4
+%{summary}
+
+%package -n     python3-matplotlib-tk
+Summary:        Tk backend for python3-matplotlib
+BuildRequires:  python3-pillow-tk
+BuildRequires:  python3-tkinter
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+Requires:       python3-pillow-tk
+Requires:       python3-tkinter
+
+%description -n python3-matplotlib-tk
+%{summary}
+
+%if %{with wx}
+%package -n     python3-matplotlib-wx
+Summary:        WX backend for python3-matplotlib
+BuildRequires:  python3dist(wxpython)
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+Requires:       python3dist(wxpython)
+
+%description -n python3-matplotlib-wx
+%{summary}
+%endif
+
+%package -n python3-matplotlib-doc
+Summary:        Documentation files for python-matplotlib
+%if %{with html}
+BuildRequires:  graphviz
+BuildRequires:  make
+BuildRequires:  python3dist(sphinx)
+BuildRequires:  tex(latex)
+BuildRequires:  tex-preview
+BuildRequires:  ipython
+%endif
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+
+%description -n python3-matplotlib-doc
+%{summary}
+
+%package -n python3-matplotlib-test-data
+Summary:        Test data for python3-matplotlib
+Requires:       python3-matplotlib%{?_isa} = %{version}-%{release}
+
+%description -n python3-matplotlib-test-data
+%{summary}
+
+
+%prep
+%autosetup -n matplotlib-%{Version} -N
+
+# Fedora-specific patches follow:
+%autopatch -p1 -m 1000
+# Updated test images for new FreeType.
+gzip -dc %SOURCE1000 | tar xf - --transform='s~^mpl-images-%{mpl_images_version}-with-freetype-%{ftver}/~~'
+
+# Backports or reported upstream
+%autopatch -p1 -M 999
+
+
+%generate_buildrequires
+%pyproject_buildrequires -w %build_backend_args
+
+
+%build
+%set_build_flags
+export http_proxy=http://127.0.0.1/
+
+MPLCONFIGDIR=$PWD %pyproject_wheel %build_backend_args
+%if %{with html}
+# Need to make built matplotlib libs available for the sphinx extensions:
+MPLCONFIGDIR=$PWD \
+PYTHONPATH="%{pyproject_site_lib}" \
+    make -C doc html
+%endif
+# Ensure all example files are non-executable so that the -doc
+# package doesn't drag in dependencies
+find galleries -name '*.py' -exec chmod a-x '{}' \;
+
+
+%install
+export http_proxy=http://127.0.0.1/
+
+MPLCONFIGDIR=$PWD %pyproject_install
+
+# Delete unnecessary files.
+rm %{buildroot}%{python3_sitearch}/matplotlib/tests/tinypages/.gitignore
+rm %{buildroot}%{python3_sitearch}/matplotlib/tests/tinypages/_static/.gitignore
+
+# Move files to Fedora-specific locations.
+mkdir -p %{buildroot}%{_sysconfdir} %{buildroot}%{_datadir}/matplotlib
+mv %{buildroot}%{python3_sitearch}/matplotlib/mpl-data \
+   %{buildroot}%{_datadir}/matplotlib
+%if %{without bundled_fonts}
+rm -rf %{buildroot}%{_datadir}/matplotlib/mpl-data/fonts
+%endif
+
+
+%if %{with check}
+%check
+# These files confuse pytest, and we want to test the installed copy.
+rm -rf build*/
+
+# We need to prime this LaTeX cache stuff, or it might fail while running tests
+# in parallel.
+mktexfmt latex.fmt
+mktexfmt lualatex.fmt
+mktexfmt pdflatex.fmt
+mktexfmt xelatex.fmt
+# Also prime the font cache.
+%{py3_test_envvars} %{python3} -c 'import matplotlib.font_manager'
+
+export http_proxy=http://127.0.0.1/
+
+# This test checks for "slowness" that often fails on a heavily-loaded builder.
+k="${k-}${k+ and }not test_invisible_Line_rendering"
+# This test is flaky.
+k="${k-}${k+ and }not test_form_widget_get_with_datetime_and_date_fields"
+%ifarch %{ix86}
+# This test won't work due to Xvfb not existing.
+k="${k-}${k+ and }not test_cross_Qt_imports"
+%endif
+%endif
+
+%files -n python3-matplotlib-data
+%{_datadir}/matplotlib/mpl-data/
+%if %{with bundled_fonts}
+%exclude %{_datadir}/matplotlib/mpl-data/fonts/
+%endif
+
+%if %{with bundled_fonts}
+%files -n python3-matplotlib-data-fonts
+%{_datadir}/matplotlib/mpl-data/fonts/
+%endif
+
+%files -n python3-matplotlib-doc
+%doc galleries/examples
+%if %{with html}
+%doc doc/build/html/*
+%endif
+
+%files -n python3-matplotlib
+%license LICENSE/
+%doc README.md
+%{python3_sitearch}/matplotlib-*.dist-info/
+%{python3_sitearch}/matplotlib/
+%exclude %{python3_sitearch}/matplotlib/tests/baseline_images/*
+%{python3_sitearch}/mpl_toolkits/
+%exclude %{python3_sitearch}/mpl_toolkits/*/tests/baseline_images/*
+%pycached %{python3_sitearch}/pylab.py
+%pycached %exclude %{python3_sitearch}/matplotlib/backends/backend_qt5*.py
+%pycached %exclude %{python3_sitearch}/matplotlib/backends/backend_gtk*.py
+%pycached %exclude %{python3_sitearch}/matplotlib/backends/_backend_tk.py
+%pycached %exclude %{python3_sitearch}/matplotlib/backends/backend_tk*.py
+%exclude %{python3_sitearch}/matplotlib/backends/_tkagg.*
+%pycached %exclude %{python3_sitearch}/matplotlib/backends/backend_wx*.py
+%if %{with html}
+%exclude %{_pkgdocdir}/*/
+%endif
+
+%files -n python3-matplotlib-test-data
+%{python3_sitearch}/matplotlib/tests/baseline_images/
+%{python3_sitearch}/mpl_toolkits/*/tests/baseline_images/
+
+# This is handled by backend_qt*.py (no number), so the package exists only for
+# the dependencies.
+%files -n python3-matplotlib-qt6
+
+%files -n python3-matplotlib-gtk3
+%pycached %{python3_sitearch}/matplotlib/backends/backend_gtk3*.py
+
+%files -n python3-matplotlib-gtk4
+%pycached %{python3_sitearch}/matplotlib/backends/backend_gtk4*.py
+
+%files -n python3-matplotlib-tk
+%pycached %{python3_sitearch}/matplotlib/backends/backend_tk*.py
+%pycached %{python3_sitearch}/matplotlib/backends/_backend_tk.py
+%{python3_sitearch}/matplotlib/backends/_tkagg.*
+
+%if %{with wx}
+%files -n python3-matplotlib-wx
+%pycached %{python3_sitearch}/matplotlib/backends/backend_wx*.py
+%endif
+
+
+%changelog
+%autochangelog

sources

@@ -0,0 +1,2 @@
+SHA512 (matplotlib-3.9.1.tar.gz) = a1d48c42a5f4f04b57e34d25df842917e6380b8d6b6d1018c9b630cbbea4619b1d75729a218a6f52b63d4a61c2204bb26ad8f741566f84e41ca73190e419f672
+SHA512 (matplotlib-3.9.1-with-freetype-2.13.1.tar.gz) = 7d7d04d410265e6f3adc95bc103f12432f5c3c2b3788ab11f2326054f1cd116ff795bd2d2999cdb4da997df597bec00bbba61acea6de5eb9d56c686aa47a7bf7