* Wed Sep 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.1-7

- Fix USB device passthrough (#522683)

.abignore

@@ -1,31 +0,0 @@
-[suppress_function]
-symbol_version_regexp = LIBVIRT_PRIVATE.*
-soname_regexp = libvirt\\.so.*
-
-[suppress_function]
-symbol_version_regexp = LIBVIRT_ADMIN_PRIVATE.*
-soname_regexp = libvirt-admin\\.so.*
-
-[suppress_variable]
-symbol_version_regexp = LIBVIRT_PRIVATE.*
-soname_regexp = libvirt\\.so.*
-
-[suppress_variable]
-symbol_version_regexp = LIBVIRT_ADMIN_PRIVATE.*
-soname_regexp = libvirt-admin\\.so.*
-
-[suppress_function]
-symbol_version_regexp = .*
-soname_regexp = libvirt_storage_.*\\.so.*
-
-[suppress_variable]
-symbol_version_regexp = .*
-soname_regexp = libvirt_storage_.*\\.so.*
-
-[suppress_function]
-symbol_version_regexp = .*
-soname_regexp = libvirt_driver_.*\\.so.*
-
-[suppress_variable]
-symbol_version_regexp = .*
-soname_regexp = libvirt_driver_.*\\.so.*

.cvsignore

@@ -0,0 +1,13 @@
+.build*.log
+*.rpm
+i686
+x86_64
+libvirt-*.tar.gz
+libvirt-0.6.0.tar.gz
+libvirt-0.6.1.tar.gz
+libvirt-0.6.2.tar.gz
+libvirt-0.6.3.tar.gz
+libvirt-0.6.4.tar.gz
+libvirt-0.6.5.tar.gz
+libvirt-0.7.0.tar.gz
+libvirt-0.7.1.tar.gz

.gitignore

@@ -1,5 +0,0 @@
-.build*.log
-*.rpm
-i686
-x86_64
-libvirt-*.tar.xz

0001-virDomainDiskTranslateSourcePool-Check-for-disk-type.patch

@@ -1,36 +0,0 @@
-From: Michal Privoznik <mprivozn@redhat.com>
-Date: Mon, 9 Mar 2020 16:40:57 +0100
-Subject: [PATCH] virDomainDiskTranslateSourcePool: Check for disk type
- correctly
-
-When rewriting the virDomainDiskTranslateSourcePool() function in
-v6.1.0-rc1~184 a typo was introduced. Previously, we allowed
-startup policy only for those volumes which translated to
-VIR_STORAGE_TYPE_FILE. But starting with the referenced commit,
-the value we checked for was changed to VIR_STORAGE_VOL_FILE
-which comes from a different enum and has a different value too.
-This is wrong, because virStorageSourceGetActualType() returns a
-value from the original enum.
-
-Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1811728
-
-Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
-Reviewed-by: Peter Krempa <pkrempa@redhat.com>
-(cherry picked from commit 3918dbd84e4951b43f93fbf50ef52be00274850c)
----
- src/conf/domain_conf.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c
-index 17867eeece..fd2e8f4eb5 100644
---- a/src/conf/domain_conf.c
-+++ b/src/conf/domain_conf.c
-@@ -31746,7 +31746,7 @@ virDomainDiskTranslateSourcePool(virDomainDiskDefPtr def)
-     }
- 
-     if (def->startupPolicy != 0 &&
--        virStorageSourceGetActualType(def->src) != VIR_STORAGE_VOL_FILE) {
-+        virStorageSourceGetActualType(def->src) != VIR_STORAGE_TYPE_FILE) {
-         virReportError(VIR_ERR_XML_ERROR, "%s",
-                        _("'startupPolicy' is only valid for "
-                          "'file' type volume"));

0002-network-make-it-safe-to-call-networkSetupPrivateChai.patch

@@ -1,55 +0,0 @@
-From: Laine Stump <laine@redhat.com>
-Date: Thu, 7 May 2020 22:32:59 -0400
-Subject: [PATCH] network: make it safe to call networkSetupPrivateChains()
- multiple times
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-networkSetupPrivateChains() is currently called only once per run of
-libvirtd, so it can assume that errInitV4 and errInitV6 are empty/null
-when it is called. In preparation for potentially calling this
-function multiple times during one run, this patch moves the reset of
-errInitV[46] to the top of the function, to assure no memory is
-leaked.
-
-Signed-off-by: Laine Stump <laine@redhat.com>
-Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-(cherry picked from commit de110f110fb917a31b9f33ad8e4b3c1d3284766a)
----
- src/network/bridge_driver_linux.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/src/network/bridge_driver_linux.c b/src/network/bridge_driver_linux.c
-index 7bbde5c6a9..80bd2409e1 100644
---- a/src/network/bridge_driver_linux.c
-+++ b/src/network/bridge_driver_linux.c
-@@ -48,6 +48,10 @@ static void networkSetupPrivateChains(void)
-     VIR_DEBUG("Setting up global firewall chains");
- 
-     createdChains = false;
-+    virFreeError(errInitV4);
-+    errInitV4 = NULL;
-+    virFreeError(errInitV6);
-+    errInitV6 = NULL;
- 
-     rc = iptablesSetupPrivateChains(VIR_FIREWALL_LAYER_IPV4);
-     if (rc < 0) {
-@@ -56,8 +60,6 @@ static void networkSetupPrivateChains(void)
-         errInitV4 = virSaveLastError();
-         virResetLastError();
-     } else {
--        virFreeError(errInitV4);
--        errInitV4 = NULL;
-         if (rc) {
-             VIR_DEBUG("Created global IPv4 chains");
-             createdChains = true;
-@@ -73,8 +75,6 @@ static void networkSetupPrivateChains(void)
-         errInitV6 = virSaveLastError();
-         virResetLastError();
-     } else {
--        virFreeError(errInitV6);
--        errInitV6 = NULL;
-         if (rc) {
-             VIR_DEBUG("Created global IPv6 chains");
-             createdChains = true;

0003-network-force-re-creation-of-iptables-private-chains.patch

@@ -1,265 +0,0 @@
-From: Laine Stump <laine@redhat.com>
-Date: Thu, 7 May 2020 21:54:39 -0400
-Subject: [PATCH] network: force re-creation of iptables private chains on
- firewalld restart
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When firewalld is stopped, it removes *all* iptables rules and chains,
-including those added by libvirt. Since restarting firewalld means
-stopping and then starting it, any time it is restarted, libvirt needs
-to recreate all the private iptables chains it uses, along with all
-the rules it adds.
-
-We already have code in place to call networkReloadFirewallRules() any
-time we're notified of a firewalld start, and
-networkReloadFirewallRules() will call
-networkPreReloadFirewallRules(), which calls
-networkSetupPrivateChains(); unfortunately that last call is called
-using virOnce(), meaning that it will only be called the first time
-through networkPreReloadFirewallRules() after libvirtd starts - so of
-course when firewalld is later restarted, the call to
-networkSetupPrivateChains() is skipped.
-
-The neat and tidy way to fix this would be if there was a standard way
-to reset a pthread_once_t object so that the next time virOnce was
-called, it would think the function hadn't been called, and call it
-again. Unfortunately, there isn't any official way of doing that (we
-*could* just fill it with 0 and hope for the best, but that doesn't
-seem very safe.
-
-So instead, this patch just adds a static variable called
-chainInitDone, which is set to true after networkSetupPrivateChains()
-is called for the first time, and then during calls to
-networkPreReloadFirewallRules(), if chainInitDone is set, we call
-networkSetupPrivateChains() directly instead of via virOnce().
-
-It may seem unsafe to directly call a function that is meant to be
-called only once, but I think in this case we're safe - there's
-nothing in the function that is inherently "once only" - it doesn't
-initialize anything that can't safely be re-initialized (as long as
-two threads don't try to do it at the same time), and it only happens
-when responding to a dbus message that firewalld has been started (and
-I don't think it's possible for us to be processing two of those at
-once), and even then only if the initial call to the function has
-already been completed (so we're safe if we receive a firewalld
-restart call at a time when we haven't yet called it, or even if
-another thread is already in the process of executing it. The only
-problematic bit I can think of is if another thread is in the process
-of adding an iptable rule at the time we're executing this function,
-but 1) none of those threads will be trying to add chains, and 2) if
-there was a concurrency problem with other threads adding iptables
-rules while firewalld was being restarted, it would still be a problem
-even without this change.
-
-This is yet another patch that fixes an occurrence of this error:
-
-COMMAND_FAILED: '/usr/sbin/iptables -w10 -w --table filter --insert LIBVIRT_INP --in-interface virbr0 --protocol tcp --destination-port 67 --jump ACCEPT' failed: iptables: No chain/target/match by that name.
-
-In particular, this resolves: https://bugzilla.redhat.com/1813830
-
-Signed-off-by: Laine Stump <laine@redhat.com>
-Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-(cherry picked from commit f5418b427e7d2f26803880309478de9103680826)
----
- src/network/bridge_driver.c          | 16 ++++---
- src/network/bridge_driver_linux.c    | 69 ++++++++++++++++++----------
- src/network/bridge_driver_nop.c      |  3 +-
- src/network/bridge_driver_platform.h |  2 +-
- 4 files changed, 58 insertions(+), 32 deletions(-)
-
-diff --git a/src/network/bridge_driver.c b/src/network/bridge_driver.c
-index 369e80a889..aaf14defe4 100644
---- a/src/network/bridge_driver.c
-+++ b/src/network/bridge_driver.c
-@@ -273,7 +273,9 @@ static int
- networkShutdownNetworkExternal(virNetworkObjPtr obj);
- 
- static void
--networkReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup);
-+networkReloadFirewallRules(virNetworkDriverStatePtr driver,
-+                           bool startup,
-+                           bool force);
- 
- static void
- networkRefreshDaemons(virNetworkDriverStatePtr driver);
-@@ -689,7 +691,7 @@ firewalld_dbus_filter_bridge(DBusConnection *connection G_GNUC_UNUSED,
- 
-     if (reload) {
-         VIR_DEBUG("Reload in bridge_driver because of firewalld.");
--        networkReloadFirewallRules(driver, false);
-+        networkReloadFirewallRules(driver, false, true);
-     }
- 
-     return DBUS_HANDLER_RESULT_NOT_YET_HANDLED;
-@@ -798,7 +800,7 @@ networkStateInitialize(bool privileged,
-     virNetworkObjListPrune(network_driver->networks,
-                            VIR_CONNECT_LIST_NETWORKS_INACTIVE |
-                            VIR_CONNECT_LIST_NETWORKS_TRANSIENT);
--    networkReloadFirewallRules(network_driver, true);
-+    networkReloadFirewallRules(network_driver, true, false);
-     networkRefreshDaemons(network_driver);
- 
-     if (virDriverShouldAutostart(network_driver->stateDir, &autostart) < 0)
-@@ -868,7 +870,7 @@ networkStateReload(void)
-                                 network_driver->networkConfigDir,
-                                 network_driver->networkAutostartDir,
-                                 network_driver->xmlopt);
--    networkReloadFirewallRules(network_driver, false);
-+    networkReloadFirewallRules(network_driver, false, false);
-     networkRefreshDaemons(network_driver);
-     virNetworkObjListForEach(network_driver->networks,
-                              networkAutostartConfig,
-@@ -2236,14 +2238,16 @@ networkReloadFirewallRulesHelper(virNetworkObjPtr obj,
- 
- 
- static void
--networkReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup)
-+networkReloadFirewallRules(virNetworkDriverStatePtr driver,
-+                           bool startup,
-+                           bool force)
- {
-     VIR_INFO("Reloading iptables rules");
-     /* Ideally we'd not even register the driver when unprivilegd
-      * but until we untangle the virt driver that's not viable */
-     if (!driver->privileged)
-         return;
--    networkPreReloadFirewallRules(driver, startup);
-+    networkPreReloadFirewallRules(driver, startup, force);
-     virNetworkObjListForEach(driver->networks,
-                              networkReloadFirewallRulesHelper,
-                              NULL);
-diff --git a/src/network/bridge_driver_linux.c b/src/network/bridge_driver_linux.c
-index 80bd2409e1..b0bd207250 100644
---- a/src/network/bridge_driver_linux.c
-+++ b/src/network/bridge_driver_linux.c
-@@ -36,11 +36,14 @@ VIR_LOG_INIT("network.bridge_driver_linux");
- #define PROC_NET_ROUTE "/proc/net/route"
- 
- static virOnceControl createdOnce;
--static bool createdChains;
-+static bool chainInitDone; /* true iff networkSetupPrivateChains was ever called */
-+static bool createdChains; /* true iff networkSetupPrivateChains created chains during most recent call */
- static virErrorPtr errInitV4;
- static virErrorPtr errInitV6;
- 
--/* Only call via virOnce */
-+/* Usually only called via virOnce, but can also be called directly in
-+ * response to firewalld reload (if chainInitDone == true)
-+ */
- static void networkSetupPrivateChains(void)
- {
-     int rc;
-@@ -82,6 +85,8 @@ static void networkSetupPrivateChains(void)
-             VIR_DEBUG("Global IPv6 chains already exist");
-         }
-     }
-+
-+    chainInitDone = true;
- }
- 
- 
-@@ -111,7 +116,10 @@ networkHasRunningNetworks(virNetworkDriverStatePtr driver)
- }
- 
- 
--void networkPreReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup)
-+void
-+networkPreReloadFirewallRules(virNetworkDriverStatePtr driver,
-+                              bool startup,
-+                              bool force)
- {
-     /*
-      * If there are any running networks, we need to
-@@ -130,29 +138,42 @@ void networkPreReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup
-      * of starting the network though as that makes them
-      * more likely to be seen by a human
-      */
--    if (!networkHasRunningNetworks(driver)) {
--        VIR_DEBUG("Delayed global rule setup as no networks are running");
--        return;
--    }
-+    if (chainInitDone && force) {
-+        /* The Private chains have already been initialized once
-+         * during this run of libvirtd, so 1) we can't do it again via
-+         * virOnce(), and 2) we need to re-add the private chains even
-+         * if there are currently no running networks, because the
-+         * next time a network is started, libvirt will expect that
-+         * the chains have already been added. So we call directly
-+         * instead of via virOnce().
-+         */
-+        networkSetupPrivateChains();
- 
--    ignore_value(virOnce(&createdOnce, networkSetupPrivateChains));
-+    } else {
-+        if (!networkHasRunningNetworks(driver)) {
-+            VIR_DEBUG("Delayed global rule setup as no networks are running");
-+            return;
-+        }
- 
--    /*
--     * If this is initial startup, and we just created the
--     * top level private chains we either
--     *
--     *   - upgraded from old libvirt
--     *   - freshly booted from clean state
--     *
--     * In the first case we must delete the old rules from
--     * the built-in chains, instead of our new private chains.
--     * In the second case it doesn't matter, since no existing
--     * rules will be present. Thus we can safely just tell it
--     * to always delete from the builin chain
--     */
--    if (startup && createdChains) {
--        VIR_DEBUG("Requesting cleanup of legacy firewall rules");
--        iptablesSetDeletePrivate(false);
-+        ignore_value(virOnce(&createdOnce, networkSetupPrivateChains));
-+
-+        /*
-+         * If this is initial startup, and we just created the
-+         * top level private chains we either
-+         *
-+         *   - upgraded from old libvirt
-+         *   - freshly booted from clean state
-+         *
-+         * In the first case we must delete the old rules from
-+         * the built-in chains, instead of our new private chains.
-+         * In the second case it doesn't matter, since no existing
-+         * rules will be present. Thus we can safely just tell it
-+         * to always delete from the builin chain
-+         */
-+        if (startup && createdChains) {
-+            VIR_DEBUG("Requesting cleanup of legacy firewall rules");
-+            iptablesSetDeletePrivate(false);
-+        }
-     }
- }
- 
-diff --git a/src/network/bridge_driver_nop.c b/src/network/bridge_driver_nop.c
-index 08d737511f..db89c10023 100644
---- a/src/network/bridge_driver_nop.c
-+++ b/src/network/bridge_driver_nop.c
-@@ -20,7 +20,8 @@
- #include <config.h>
- 
- void networkPreReloadFirewallRules(virNetworkDriverStatePtr driver G_GNUC_UNUSED,
--                                   bool startup G_GNUC_UNUSED)
-+                                   bool startup G_GNUC_UNUSED,
-+                                   bool force G_GNUC_UNUSED)
- {
- }
- 
-diff --git a/src/network/bridge_driver_platform.h b/src/network/bridge_driver_platform.h
-index 169417a6c0..48ab52c160 100644
---- a/src/network/bridge_driver_platform.h
-+++ b/src/network/bridge_driver_platform.h
-@@ -62,7 +62,7 @@ struct _virNetworkDriverState {
- typedef struct _virNetworkDriverState virNetworkDriverState;
- typedef virNetworkDriverState *virNetworkDriverStatePtr;
- 
--void networkPreReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup);
-+void networkPreReloadFirewallRules(virNetworkDriverStatePtr driver, bool startup, bool force);
- void networkPostReloadFirewallRules(bool startup);
- 
- int networkCheckRouteCollision(virNetworkDefPtr def);

0004-systemd-start-libvirtd-after-firewalld-iptables-serv.patch

@@ -1,100 +0,0 @@
-From: Laine Stump <laine@redhat.com>
-Date: Fri, 1 May 2020 00:05:50 -0400
-Subject: [PATCH] systemd: start libvirtd after firewalld/iptables services
-
-When a system has enabled the iptables/ip6tables services rather than
-firewalld, there is no explicit ordering of the start of those
-services vs. libvirtd. This creates a problem when libvirtd.service is
-started before ip[6]tables, as the latter, when it finally is started,
-will remove all of the iptables rules that had previously been added
-by libvirt, including the custom chains where libvirt's rules are
-kept. This results in an error message similar to the following when a
-user subsequently tries to start a new libvirt network:
-
- "Error while activating network: Call to virNetworkCreate failed:
- internal error: Failed to apply firewall rules
- /usr/sbin/ip6tables -w --table filter --insert LIBVIRT_FWO \
-   --in-interface virbr2 --jump REJECT:
- ip6tables: No chain/target/match by that name."
-
-(Prior to logging this error, it also would have caused failure to
-forward (or block) traffic in some cases, e.g. for guests on a NATed
-network, since libvirt's rules to forward/block had all been deleted
-and libvirt didn't know about it, so it couldn't fix the problem)
-
-When this happens, the problem can be remedied by simply restarting
-libvirtd.service (which has the side-effect of reloading all
-libvirt-generated firewall rules)
-
-Instead, we can just explicitly stating in the libvirtd.service file
-that libvirtd.service should start after ip6tables.service and
-ip6tables.service, eliminating the race condition that leads to the
-error.
-
-There is also nothing (that I can see) in the systemd .service files
-to guarantee that firewalld.service will be started (if enabled) prior
-to libvirtd.service. The same error scenario given above would occur
-if libvirtd.service started before firewalld.service.  Even before
-that, though libvirtd would have detected that firewalld.service was
-disabled, and then turn off all firewalld support. So, for example,
-firewalld's libvirt zone wouldn't be used, and most likely traffic
-from guests would therefore be blocked (all with no external
-indication of the source of the problem other than a debug-level log
-when libvirtd was started saying that firewalld wasn't in use); also
-libvirtd wouldn't notice when firewalld reloaded its rules (which also
-simultaneously deletes all of libvirt's rules).
-
-I'm not aware of any reports that have been traced back to
-libvirtd.service starting before firewalld.service, but have seen that
-error reported multiple times, and also don't see an existing
-dependency that would guarantee firewalld.service starts before
-libvirtd.service, so it's possible it's been happening and we just
-haven't gotten to the bottom of it.
-
-This patch adds an After= line to the libvirtd.service file for each
-of iptables.service, ip6tables.service, and firewalld.servicee, which
-should guarantee that libvirtd.service isn't started until systemd has
-started whichever of the others is enabled.
-
-This race was diagnosed, and patch proposed, by Jason Montleon in
-https://bugzilla.redhat.com/1723698 . At the time (April 2019) danpb
-agreed with him that this change to libvirtd.service was a reasonable
-thing to do, but I guess everyone thought someone else was going to
-post a patch, so in the end nobody did.
-
-Signed-off-by: Laine Stump <laine@redhat.com>
-Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
-(cherry picked from commit 0756415f147dda15a417bd79eef9a62027d176e6)
----
- src/network/virtnetworkd.service.in | 3 +++
- src/remote/libvirtd.service.in      | 3 +++
- 2 files changed, 6 insertions(+)
-
-diff --git a/src/network/virtnetworkd.service.in b/src/network/virtnetworkd.service.in
-index 656e8b4f84..56182e1693 100644
---- a/src/network/virtnetworkd.service.in
-+++ b/src/network/virtnetworkd.service.in
-@@ -5,6 +5,9 @@ Requires=virtnetworkd.socket
- Requires=virtnetworkd-ro.socket
- Requires=virtnetworkd-admin.socket
- After=network.target
-+After=firewalld.service
-+After=iptables.service
-+After=ip6tables.service
- After=dbus.service
- After=apparmor.service
- After=local-fs.target
-diff --git a/src/remote/libvirtd.service.in b/src/remote/libvirtd.service.in
-index 90b2cad5b0..cc0d4e3693 100644
---- a/src/remote/libvirtd.service.in
-+++ b/src/remote/libvirtd.service.in
-@@ -11,6 +11,9 @@ Wants=libvirtd-admin.socket
- Wants=systemd-machined.service
- Before=libvirt-guests.service
- After=network.target
-+After=firewalld.service
-+After=iptables.service
-+After=ip6tables.service
- After=dbus.service
- After=iscsid.service
- After=apparmor.service

0005-libxl-fix-crash-when-initializing-driver.patch

@@ -1,43 +0,0 @@
-From: Jim Fehlig <jfehlig@suse.com>
-Date: Fri, 3 Apr 2020 15:51:48 -0600
-Subject: [PATCH] libxl: fix crash when initializing driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 54a401af478 split out DriverConfigInit from DriverConfigNew, but
-then called it a bit late from libxlStateInitialize. The cfg is used in
-libxlDriverConfigLoadFile and when uninitialized results in a crash.
-Calling DriverConfigInit immediately after DriverConfigNew fixes the
-crash.
-
-Signed-off-by: Jim Fehlig <jfehlig@suse.com>
-Reviewed-by: Erik Skultety <eskultet@redhat.com>
-Reviewed-by: Ján Tomko <jtomko@redhat.com>
-(cherry picked from commit 88011ed280c4f946a7b8e7ffcea2335eb075de60)
----
- src/libxl/libxl_driver.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/src/libxl/libxl_driver.c b/src/libxl/libxl_driver.c
-index f2387e2a20..c4fb791fa0 100644
---- a/src/libxl/libxl_driver.c
-+++ b/src/libxl/libxl_driver.c
-@@ -703,14 +703,14 @@ libxlStateInitialize(bool privileged,
-     if (!(cfg = libxlDriverConfigNew()))
-         goto error;
- 
-+    if (libxlDriverConfigInit(cfg) < 0)
-+        goto error;
-+
-     driverConf = g_strdup_printf("%s/libxl.conf", cfg->configBaseDir);
- 
-     if (libxlDriverConfigLoadFile(cfg, driverConf) < 0)
-         goto error;
- 
--    if (libxlDriverConfigInit(cfg) < 0)
--        goto error;
--
-     /* Register the callbacks providing access to libvirt's event loop */
-     libxl_osevent_register_hooks(cfg->ctx, &libxl_osevent_callbacks, cfg->ctx);
- 

Makefile

@@ -0,0 +1,21 @@
+# Makefile for source rpm: libvirt
+# $Id$
+NAME := libvirt
+SPECFILE = $(firstword $(wildcard *.spec))
+
+define find-makefile-common
+for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
+endef
+
+MAKEFILE_COMMON := $(shell $(find-makefile-common))
+
+ifeq ($(MAKEFILE_COMMON),)
+# attempt a checkout
+define checkout-makefile-common
+test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
+endef
+
+MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
+endif
+
+include $(MAKEFILE_COMMON)

branch

@@ -0,0 +1 @@
+F-12

libvirt-0.6.4-svirt-sound.patch

@@ -0,0 +1,51 @@
+From 127a39777e9809053bb98a9082e27c73543ccfa2 Mon Sep 17 00:00:00 2001
+From: Daniel P. Berrange <berrange@redhat.com>
+Date: Mon, 17 Aug 2009 08:32:08 +0100
+Subject: [PATCH] Disable sound cards when running sVirt
+
+Temporary hack till PulseAudio autostart problems are sorted out when
+SELinux enforcing (bz 486112)
+
+Fedora-patch: libvirt-0.6.4-svirt-sound.patch
+---
+ src/qemu_conf.c |   17 ++++++++++++++++-
+ 1 files changed, 16 insertions(+), 1 deletions(-)
+
+diff --git a/src/qemu_conf.c b/src/qemu_conf.c
+index f92bcef..f3b4ef0 100644
+--- a/src/qemu_conf.c
++++ b/src/qemu_conf.c
+@@ -1510,6 +1510,20 @@ int qemudBuildCommandLine(virConnectPtr conn,
+     char uuid[VIR_UUID_STRING_BUFLEN];
+     char domid[50];
+     const char *cpu = NULL;
++    int skipSound = 0;
++
++    if (driver->securityDriver &&
++        driver->securityDriver->name &&
++        STREQ(driver->securityDriver->name, "selinux") &&
++        getuid() == 0) {
++        static int soundWarned = 0;
++        skipSound = 1;
++        if (def->nsounds &&
++            !soundWarned) {
++            soundWarned = 1;
++            VIR_WARN0("Sound cards for VMs are disabled while SELinux security model is active");
++        }
++    }
+ 
+     uname_normalize(&ut);
+ 
+@@ -2181,7 +2195,8 @@ int qemudBuildCommandLine(virConnectPtr conn,
+     }
+ 
+     /* Add sound hardware */
+-    if (def->nsounds) {
++    if (def->nsounds &&
++        !skipSound) {
+         int size = 100;
+         char *modstr;
+         if (VIR_ALLOC_N(modstr, size+1) < 0)
+-- 
+1.6.2.5
+

libvirt-fix-drv-supports-feature-bogus-error.patch

@@ -0,0 +1,32 @@
+From 2f6e857ac7d6ed5cd417e684147dd9c98775ab3d Mon Sep 17 00:00:00 2001
+From: Chris Lalancette <clalance@redhat.com>
+Date: Mon, 21 Sep 2009 14:53:31 +0200
+Subject: [PATCH] Don't do virSetConnError when virDrvSupportsFeature is successful.
+
+Signed-off-by: Chris Lalancette <clalance@redhat.com>
+Fedora-patch: libvirt-fix-drv-supports-feature-bogus-error.patch
+---
+ src/libvirt.c |    7 +++++--
+ 1 files changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/src/libvirt.c b/src/libvirt.c
+index 4a11688..fa59dc7 100644
+--- a/src/libvirt.c
++++ b/src/libvirt.c
+@@ -1349,8 +1349,11 @@ virDrvSupportsFeature (virConnectPtr conn, int feature)
+     }
+ 
+     ret = VIR_DRV_SUPPORTS_FEATURE (conn->driver, conn, feature);
+-    /* Copy to connection error object for back compatability */
+-    virSetConnError(conn);
++
++    if (ret < 0)
++        /* Copy to connection error object for back compatability */
++        virSetConnError(conn);
++
+     return ret;
+ }
+ 
+-- 
+1.6.2.5
+

libvirt-fix-net-hotunplug-double-free.patch

@@ -0,0 +1,46 @@
+From d09ff3c35c29d14760d5ea03559042cc024e09ab Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Thu, 17 Sep 2009 15:31:08 +0100
+Subject: [PATCH] Fix net/disk hot-unplug segfault
+
+When we hot-unplug the last device, we're currently double-freeing
+the device definition.
+
+Reported by Michal Nowak here:
+
+  https://bugzilla.redhat.com/523953
+
+* src/qemu_driver.c: fix double free
+
+(cherry-picked from commit 8881ae1bf8783006777429403cc543c33187175d)
+
+Fedora-patch: libvirt-fix-net-hotunplug-double-free.patch
+---
+ src/qemu_driver.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index a65334f..de31581 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -5998,7 +5998,7 @@ try_command:
+             /* ignore, harmless */
+         }
+     } else {
+-        VIR_FREE(vm->def->disks[0]);
++        VIR_FREE(vm->def->disks);
+         vm->def->ndisks = 0;
+     }
+     virDomainDiskDefFree(detach);
+@@ -6100,7 +6100,7 @@ qemudDomainDetachNetDevice(virConnectPtr conn,
+             /* ignore, harmless */
+         }
+     } else {
+-        VIR_FREE(vm->def->nets[0]);
++        VIR_FREE(vm->def->nets);
+         vm->def->nnets = 0;
+     }
+     virDomainNetDefFree(detach);
+-- 
+1.6.2.5
+

libvirt-fix-pci-hostdev-hotunplug-leak.patch

@@ -0,0 +1,50 @@
+From d04ac8624f5fabe7587982796f2e2161220b0fcc Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Thu, 17 Sep 2009 15:32:45 +0100
+Subject: [PATCH] Fix leak in PCI hostdev hot-unplug
+
+* src/qemu_driver.c: sync the hostdev hot-unplug code with the disk/net
+  code.
+
+(cherry-picked from commit a70da51ff76ed860bfc0cdee2e1d556da997c557)
+
+Fedora-patch: libvirt-fix-pci-hostdev-hotunplug-leak.patch
+---
+ src/qemu_driver.c |   20 +++++++++++++-------
+ 1 files changed, 13 insertions(+), 7 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index de31581..2ddcdc0 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -6206,14 +6206,20 @@ static int qemudDomainDetachHostPciDevice(virConnectPtr conn,
+         pciFreeDevice(conn, pci);
+     }
+ 
+-    if (i != --vm->def->nhostdevs)
+-        memmove(&vm->def->hostdevs[i],
+-                &vm->def->hostdevs[i+1],
+-                sizeof(*vm->def->hostdevs) * (vm->def->nhostdevs-i));
+-    if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs) < 0) {
+-        virReportOOMError(conn);
+-        ret = -1;
++    if (vm->def->nhostdevs > 1) {
++        memmove(vm->def->hostdevs + i,
++                vm->def->hostdevs + i + 1,
++                sizeof(*vm->def->hostdevs) *
++                (vm->def->nhostdevs - (i + 1)));
++        vm->def->nhostdevs--;
++        if (VIR_REALLOC_N(vm->def->hostdevs, vm->def->nhostdevs) < 0) {
++            /* ignore, harmless */
++        }
++    } else {
++        VIR_FREE(vm->def->hostdevs);
++        vm->def->nhostdevs = 0;
+     }
++    virDomainHostdevDefFree(detach);
+ 
+     return ret;
+ }
+-- 
+1.6.2.5
+

libvirt-fix-qemu-raw-format-save.patch

@@ -0,0 +1,53 @@
+From e50c91fdcea5d81e3eb2051c05f4e51a16c3e692 Mon Sep 17 00:00:00 2001
+From: Charles Duffy <Charles_Duffy@dell.com>
+Date: Fri, 18 Sep 2009 11:32:35 -0500
+Subject: [PATCH] Prevent attempt to call cat -c during virDomainSave to raw
+
+Fedora-patch: libvirt-fix-qemu-raw-format-save.patch
+---
+ src/qemu_driver.c |   28 ++++++++++++++++++----------
+ 1 files changed, 18 insertions(+), 10 deletions(-)
+
+diff --git a/src/qemu_driver.c b/src/qemu_driver.c
+index 2ddcdc0..7c7b985 100644
+--- a/src/qemu_driver.c
++++ b/src/qemu_driver.c
+@@ -3905,17 +3905,25 @@ static int qemudDomainSave(virDomainPtr dom,
+         goto cleanup;
+     }
+ 
+-    const char *prog = qemudSaveCompressionTypeToString(header.compressed);
+-    if (prog == NULL) {
+-        qemudReportError(dom->conn, dom, NULL, VIR_ERR_INTERNAL_ERROR,
+-                         _("Invalid compress format %d"), header.compressed);
+-        goto cleanup;
+-    }
++    {
++        const char *prog = qemudSaveCompressionTypeToString(header.compressed);
++        const char *args;
+ 
+-    if (STREQ (prog, "raw"))
+-        prog = "cat";
+-    internalret = virAsprintf(&command, "migrate \"exec:"
+-                              "%s -c >> '%s' 2>/dev/null\"", prog, safe_path);
++        if (prog == NULL) {
++            qemudReportError(dom->conn, dom, NULL, VIR_ERR_INTERNAL_ERROR,
++                             _("Invalid compress format %d"), header.compressed);
++            goto cleanup;
++        }
++
++        if (STREQ (prog, "raw")) {
++            prog = "cat";
++            args = "";
++        } else {
++            args = "-c";
++        }
++        internalret = virAsprintf(&command, "migrate \"exec:"
++                                  "%s %s >> '%s' 2>/dev/null\"", prog, args, safe_path);
++    }
+ 
+     if (internalret < 0) {
+         virReportOOMError(dom->conn);
+-- 
+1.6.2.5
+

libvirt-fix-usb-device-passthrough.patch

@@ -0,0 +1,41 @@
+From 16f20706f8d2f113bb6a49f56e415c16d438183e Mon Sep 17 00:00:00 2001
+From: Mark McLoughlin <markmc@redhat.com>
+Date: Wed, 30 Sep 2009 18:37:03 +0100
+Subject: [PATCH] Fix USB device re-labelling
+
+A simple misplaced break out of a switch results in:
+
+  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
+  libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
+  libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
+
+when trying to passthrough a USB host device to qemu.
+
+* src/security_selinux.c: fix a switch/break thinko
+
+Fedora-patch: libvirt-fix-usb-device-passthrough.patch
+---
+ src/security_selinux.c |    3 +--
+ 1 files changed, 1 insertions(+), 2 deletions(-)
+
+diff --git a/src/security_selinux.c b/src/security_selinux.c
+index bc295b1..b4dc153 100644
+--- a/src/security_selinux.c
++++ b/src/security_selinux.c
+@@ -464,12 +464,11 @@ SELinuxSetSecurityHostdevLabel(virConnectPtr conn,
+ 
+             ret = usbDeviceFileIterate(conn, usb, SELinuxSetSecurityUSBLabel, vm);
+             usbFreeDevice(conn, usb);
+-
+-            break;
+         } else {
+             /* XXX deal with product/vendor better */
+             ret = 0;
+         }
++        break;
+     }
+ 
+     case VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI: {
+-- 
+1.6.4.4
+

sources

@@ -1 +1 @@
-SHA512 (libvirt-6.1.0.tar.xz) = 17a2641f300a4a05149261bae74ac856e9a2511a259146595d2e2412c4a0601d88369b0544ba86edc80e433a47cf828317d8de38c6ec86a1b3efaca75294a606
+f1cd360a5da38b847e166c6482141940  libvirt-0.7.1.tar.gz