Move kconfig comment below the "if BR2_PACKAGE_BIND...endif" block so
that the two sub-options are presented in menuconfig as subordinate to
"bind" package selection rather than equal to it as if they were
unrelated.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0d566b8cc7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help section of "BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE_REDUNDANT"
refers to U-Boot configuration option "CONFIG_ENV_SIZE_REDUND" which is
removed since U-Boot v2020.01, so remove this reference.
We may replace this with a reference to "CONFIG_ENV_OFFSET_REDUND" as
another indicator that a redundant environment image should be created.
This also fixes a minor typo in the same file.
Signed-off-by: Dominik Michael Rauh <dmrauh@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c3ebeca440)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Open-Source IPA shlibs need to be signed in order to be runnable within
the same process, otherwise they are deemed Closed-Source and run in
another process and communicate over IPC.
The shlib installed on the target should be the same as the one signed
by libcamera during package creation otherwise the signature won't match
the shlib.
Buildroot sanitizes RPATH in a post build process. meson gets rid of
rpath while installing so we don't need to do it manually.
Buildroot may strip symbols, so we need to do the same before signing.
Signing the IPA shlibs is done by the meson install target, so we need
to strip the IPA shlibs, so after the build but before the install,
which a post-build hooks fits the best.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[yann.morin.1998@free.fr: slight rewording of commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bba4dad9aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The c_rehash script allows command injection (CVE-2022-2068)
============================================================
Severity: Moderate
In addition to the c_rehash shell command injection identified in
CVE-2022-1292, further circumstances where the c_rehash script does not
properly sanitise shell metacharacters to prevent command injection were
found by code review.
When the CVE-2022-1292 was fixed it was not discovered that there
are other places in the script where the file names of certificates
being hashed were possibly passed to a command executed through the
shell.
This script is distributed by some operating systems in a manner where
it is automatically executed. On such operating systems, an attacker
could execute arbitrary commands with the privileges of the script.
Use of the c_rehash script is considered obsolete and should be replaced
by the OpenSSL rehash command line tool.
https://www.openssl.org/news/secadv/20220621.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 026f35d9e7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-2085: A NULL pointer dereference vulnerability was found in
Ghostscript, which occurs when it tries to render a large number of bits
in memory. When allocating a buffer device, it relies on an
init_device_procs defined for the device that uses it as a prototype
that depends upon the number of bits per pixel. For bpp > 64,
mem_x_device is used and does not have an init_device_procs defined.
This flaw allows an attacker to parse a large number of bits (more than
64 bits per pixel), which triggers a NULL pointer dereference flaw,
causing an application to crash.
Drop patch (already in version)
https://www.ghostscript.com/doc/9.56.0/News.htmhttps://www.ghostscript.com/doc/9.56.1/News.htm
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit df91a970b6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PJSIP is a free and open source multimedia communication library written
in C language implementing standard based protocols such as SIP, SDP,
RTP, STUN, TURN, and ICE. In versions prior to and including 2.12.1 a
stack buffer overflow vulnerability affects PJSIP users that use STUN in
their applications, either by: setting a STUN server in their
account/media config in PJSUA/PJSUA2 level, or directly using
`pjlib-util/stun_simple` API.
https://github.com/pjsip/pjproject/security/advisories/GHSA-26j7-ww69-c4qj
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7ea3831685)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following guile build failure without NPTL raised since the
addition of bdwgc in commit b0476427f6 and
7896408d41:
configure:60776: checking for GC_is_heap_ptr
configure:60776: /home/buildroot/autobuild/instance-2/output-1/host/bin/arm-buildroot-linux-uclibcgnueabi-gcc -std=gnu11 -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O1 -g0 -DHAVE_GC_SET_FINALIZER_NOTIFIER -DHAVE_GC_GET_HEAP_USAGE_SAFE -DHAVE_GC_GET_FREE_SPACE_DIVISOR -DHAVE_GC_SET_FINALIZE_ON_DEMAND -flto -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -latomic_ops -lgc -lpthread -ldl -latomic -lm >&5
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-2/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgc.so: undefined reference to `pthread_getattr_np'
[...]
In file included from ../libguile/alist.h:26,
from ../libguile.h:31,
from guile.c:38:
../libguile/pairs.h:205:1: error: conflicting types for 'GC_is_heap_ptr'
205 | GC_is_heap_ptr (void *ptr)
| ^~~~~~~~~~~~~~
In file included from ../libguile/bdw-gc.h:48,
from ../libguile/gc.h:142,
from ../libguile/pairs.h:26,
from ../libguile/alist.h:26,
from ../libguile.h:31,
from guile.c:38:
/home/buildroot/autobuild/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/gc/gc.h:551:20: note: previous declaration of 'GC_is_heap_ptr' was here
551 | GC_API int GC_CALL GC_is_heap_ptr(const void *);
| ^~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/819f231a60fc81f9a8dd07bf5411aa9d8f78c3bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 41d60d0164)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following security issues:
- Heap buffer overflow in wavlike_ima_decode_block()
- Heap buffer overflow in msadpcm_decode_block()
- Heap buffer overflow in psf_binheader_readf()
- Index out of bounds in psf_nms_adpcm_decode_block()
- Heap buffer overflow in flac_buffer_copy()
- Heap buffer overflow in copyPredictorTo24()
- Uninitialized variable in psf_binheader_readf()
Drop patch (already in version)
While at it, also drop mention of CVE-2018-13419 which is correctly
tagged as only affecting version 1.0.28 in NVD NIST database:
https://nvd.nist.gov/vuln/detail/CVE-2018-13419https://github.com/libsndfile/libsndfile/releases/tag/1.1.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c59a9d12b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NOTICE hash is changed due to a copyright year update.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit bac3eadda8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable paxtest on microblaze to avoid the following build failure:
shlibtest.c:9:1: error: requested alignment '65536' exceeds object file maximum 32768
9 | char shbss[PAGE_SIZE_MAX] __pagealigned;
| ^~~~
Updating second patch to set PAGE_SIZE_MAX to 32768 will raise another
build failure:
/tmp/cccMSYDr.s: Assembler messages:
/tmp/cccMSYDr.s: Error: PC relative branch to label buf which is not in the instruction space
Fixes:
- http://autobuild.buildroot.org/results/aba489143b4017617f67c1012bba1f4687708380
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit abfca98ea2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without SSP raised since the addition of
the package in commit f0d37e275a:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/i686-buildroot-linux-musl/9.4.0/../../../../i686-buildroot-linux-musl/bin/ld: talloc.c.5.o: in function `_vasprintf_tc':
talloc.c:(.text+0x427d): undefined reference to `__stack_chk_fail_local'
Fixes:
- http://autobuild.buildroot.org/results/e221bde25c7622db99761d0adcd56663296beb15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6a8dae6ddd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmodsecurity embeds several mbedtls source files since version 3.0.0
and
a3ae686f25
resulting in the following static build failure if curl is built with
mbedtls support:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/buildroot/autobuild/instance-0/output-1/host/bin/../m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/libmbedcrypto.a(md5.c.o): in function `mbedtls_md5_free':
md5.c:(.text+0x16): multiple definition of `mbedtls_md5_free'; ../../src/.libs/libmodsecurity.a(libmbedtls_la-md5.o):md5.c:(.text+0x16): first defined here
Fixes:
- http://autobuild.buildroot.org/results/98472a3a41cdbcb3d02289a437074a267f4b2e8e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9fc652a373)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Default configuration file is wrong for the default compiling options.
Fixes:
Successfully initialized wpa_supplicant
Line 1: unknown global field 'ctrl_interface=/var/run/wpa_supplicant'.
Line 1: Invalid configuration line
'ctrl_interface=/var/run/wpa_supplicant'.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a76294cd6c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure on mips:
In file included from /nvmedata/autobuild/instance-15/output-1/build/libabseil-cpp-20211102.0/absl/base/internal/low_level_alloc.cc:26:
/nvmedata/autobuild/instance-15/output-1/build/libabseil-cpp-20211102.0/absl/base/internal/direct_mmap.h:49:10: fatal error: sgidefs.h: No such file or directory
49 | #include <sgidefs.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/3fa027e602bacb22316fb5d9b233baa0b0f0e845
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4e56904624)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libeastl needs threads since its addition in commit
ed9ddaafb2 and
800bc26659:
In file included from /home/autobuild/autobuild/instance-7/output-1/build/libeastl-45469730d641868ce05433fff2e199510c7d45c3/source/thread_support.cpp:7:
/home/autobuild/autobuild/instance-7/output-1/build/libeastl-45469730d641868ce05433fff2e199510c7d45c3/include/EASTL/internal/thread_support.h:37:18: fatal error: pthread.h: No such file or directory
37 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/54ff018467d157530bde4d35602fd1820d9eb348
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4c478bb055)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to remove a patch which needs frequent updates on major version
bumps and to get rid of autoreconf we just add -lz when creating a static
build. This make sure that static linking occurs in the right order.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b03e8e693a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since php-7.4 upstream switched to pkg-config to detect icu:
20fa2e7b58
Remove all unneeded code from php.mk.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f939cf7c8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ABSL_RUN_TESTS has been replaced by the standard BUILD_TESTING option
(which is already passed by cmake infrastructure) since version
20210324.0 and
a50ae369a3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6d0c0f1a43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-1348: A vulnerability was found in logrotate in how the
state file is created. The state file is used to prevent parallel
executions of multiple instances of logrotate by acquiring and releasing
a file lock. When the state file does not exist, it is created with
world-readable permission, allowing an unprivileged user to lock the
state file, stopping any rotation. This flaw affects logrotate versions
before 3.20.
https://github.com/logrotate/logrotate/blob/3.20.1/ChangeLog.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d6e7d92d82)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit be38432532 wrongly assumed that
is_trivially_copy_constructible was available since gcc 4.9 but it
wasn't fully available until gcc 5.1 and
f5e523b76d
resulting in the following build failure with gcc 4.9.1:
In file included from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/internal/gtest-death-test-internal.h:39:0,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-death-test.h:41,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest.h:64,
from /nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/src/gtest-all.cc:38:
/nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-matchers.h: In static member function 'static constexpr bool testing::internal::MatcherBase<T>::IsInlined()':
/nvmedata/autobuild/instance-13/output-1/build/gtest-1.11.0/googletest/include/gtest/gtest-matchers.h:414:12: error: 'is_trivially_copy_constructible' is not a member of 'std'
std::is_trivially_copy_constructible<M>::value &&
^
Fixes:
- http://autobuild.buildroot.org/results/1723705cb7aea5f6fcc7e6722d866ed3bd098115
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3dd5b65681)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "arches" dict lists the architectures for which Bootlin toolchains
are available, along with the corresponding Buildroot conditions for
those architecture variants.
However, there is nothing that checks that such architectures really
have Bootlin toolchains available. Even if no toolchain is available,
the architecture is considered as support, and will be listed in the
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS option, making menuconfig
believe that some Bootlin toolchain is available for the selected
architecture variant.
This is currently the case with the "mips64" architecture (as
identified by the Bootlin toolchains project). Such toolchains have
been made obsolete in toolchains.bootlin.com and replaced by the
mips64-n32 toolchains. But "mips64" is still listed in "arches",
causing this architecture to be considered as having Bootlin
toolchains available.
To avoid this to happen in the future, this commit adds a check that
verifies that an architecture listed in "arches" really has at least
one toolchain available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3c11e6f3c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some external toolchains do not have gdbserver available, but the
option BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY is always visible. And
when enabled, this option aborts with an error when gdbserver cannot
be found:
Could not find gdbserver in external toolchain
Due to that, some random configurations fail to build when
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y, for example with the Bootlin
toolchains for Microblaze or OpenRISC (because there's no GDB support
for those architectures).
One solution could be to make "Could not find gdbserver in external
toolchain" a warning instead of a hard error, but then nobody would
notice about this issue, in cases where it should legitimately abort
with a hard error.
So, the clean solution would be to add a
BR2_TOOLCHAIN_EXTERNAL_HAS_GDBSERVER. But that means all existing
external toolchains would have to be modified to select this option.
Instead, and as an exception, we chose to use inverted logic, and
create an option that is the opposite:
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER. By default, we assume
external toolchains have gdbserver. If
BR2_TOOLCHAIN_EXTERNAL_HAS_NO_GDBSERVER is enabled, we disallow the
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY option.
Note that the case of custom external toolchain does not matter: by
definition they are not tested by the autobuilders, and by definition,
we cannot know in menuconfig if the custom toolchain has or does not
have gdbserver. We could make a user-visible option for it, but that
adds no value over simply erroring out because the gdbserver binary
can't be found.
Similarly, we could add
default y if BR2_PACKAGE_GDB_ARCH_SUPPORTS
but that would make it impossible for someone to include a custom
gdbserver in their external toolchain, and gives no benefit at all.
This will help fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 80a24d0965)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We now support both MMU-enabled and MMU-less RISC-V 64-bit
configurations. However, the Bootlin toolchain for RISC-V 64-bit only
supports MMU-enabled configurations, but the current logic in
toolchain/toolchain-external/toolchain-external-bootlin/ does not take
this into account, and allows selecting the Booltin toolchain for
MMU-less RISC-V 64-bit configurations.
To fix this, the gen-bootlin-toolchains script is modified to add the
BR2_USE_MMU dependency to the description of the RISC-V 64-bit
toolchain.
However, the BR2_USE_MMU dependency was also added for glibc and musl
toolchains unconditionally, so to avoid duplicating the dependency, we
now only add it only if not already present in the list of
dependencies for this toolchain.
This will allow to fix:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1f4bba5967)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit is simply the result of regenerating the
toolchain-external-bootlin package after gen-bootlin-toolchains was
changed in commit "support/scripts/gen-bootlin-toolchains: properly
take into account !BR2_STATIC_LIBS for glibc toolchains".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3a7a49fdb1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Config.in options created for each toolchain were properly taking
into account the !BR2_STATIC_LIBS dependency of glibc
toolchains. However, this dependency was not taken into account into
the main BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS
option. Consequently, if an architecture is only supported by glibc,
but BR2_STATIC_LIBS is enabled, the main "Bootlin toolchain" option
was visible... but with no selectable toolchain.
We fix this by making sure that
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS is only true for all
architectures supported, taking into account the fact that some
architectures can only be supported if !BR2_STATIC_LIBS, when the only
available C library is glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fc63ec9292)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass TARGET_LDFLAGS (which will contain -static) through LIBS (as
LDFLAGS is not supported) to fix the following static build failure
(e.g. with musl):
/home/autobuild/autobuild/instance-15/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/10.3.0/../../../../microblazeel-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-15/output-1/host/lib/gcc/microblazeel-buildroot-linux-musl/10.3.0/libgcc.a(unwind-dw2.o): in function `__gthread_once':
/home/autobuild/autobuild/instance-15/output-1/build/host-gcc-final-10.3.0/build/microblazeel-buildroot-linux-musl/libgcc/gthr-default.h:700: undefined reference to `pthread_once'
While at it, also pass TARGET_CFLAGS through LIBS as suggested by Thomas
Petazzoni
Fixes:
- http://autobuild.buildroot.org/results/5ea9b1b976aecc401e0aff21eef3e31c8ed17181
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: remove CPPFLAGS, already in CFLAGS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c5ffe830f3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with BR2_PACKAGE_LIBMEDIAART_BACKEND_QT
raised since bump to version 1.9.5 in commit
3db4d486d6:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: libmediaart/libmediaart-2.0.so.0.905.0.p/extractqt.cpp.o: in function `std::__atomic_base<int>::operator--()':
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/sparc-buildroot-linux-uclibc/include/c++/10.3.0/bits/atomic_base.h:334: undefined reference to `__atomic_fetch_sub_4'
Fixes:
- http://autobuild.buildroot.org/results/39aa4ecd37de774e06f67a6e1c4495dc1f0917b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit bd396de5ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix strndup detection as already done for strdup in commit
f9287b263f to avoid the following build
failure raised since bump to version 5.6.5 in commit
736932c715:
In file included from /nvmedata/autobuild/instance-0/output-1/host/mipsel-buildroot-linux-gnu/sysroot/usr/include/string.h:630:0,
from append.c:34:
dmalloc.h:396:7: error: expected identifier or '(' before '__extension__'
char *strndup(const char *string, const DMALLOC_SIZE max_len);
^
Fixes:
- http://autobuild.buildroot.org/results/2164dac43e2607a3570e8f98957a70f579d06cd3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit dcf695206e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move libzstd.pc in ZSTD_BUILD_LIBS so it will be suffixed by -nomt
without threads. As a result, libzstd.pc will not contain -pthread in
Libs.Private which will avoid the following static build failure with
zchunk) raised since commit 0f0e913f10:
/home/buildroot/autobuild/instance-2/output-1/host/bin/aarch64_be-buildroot-linux-uclibc-gcc -o src/unzck src/unzck.p/unzck.c.o src/unzck.p/util_common.c.o -Wl,--as-needed -Wl,--no-undefined -static -Wl,--start-group src/lib/libzck.a -largp /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libzstd.a -pthread /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libssl.a /home/buildroot/autobuild/instance-2/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a -Wl,--end-group
/home/buildroot/autobuild/instance-2/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/10.3.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: cannot find -lpthread
Fixes:
- http://autobuild.buildroot.org/results/481d1979920daaecac48dec763151e124651740f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 253a951c4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnetconf2 doesn't build with libressl which doesn't provide
X509_STORE_CTX_get1_certs resulting in the following build failure with
netopeer2:
[100%] Linking C executable netopeer2-server
/home/buildroot/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblaze-buildroot-linux-gnu/11.2.0/../../../../microblaze-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-3/output-1/host/microblaze-buildroot-linux-gnu/sysroot/usr/lib/libnetconf2.so: undefined reference to `X509_STORE_CTX_get1_certs'
Fixes:
- http://autobuild.buildroot.org/results/7f9a114a477e859dfbc62a53ab66c58eddb2318b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e6904fdd7e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is not enabled when ARMv8
target hardware is combined with 32-bit software. That is because ARMv7
(32-bit) toolchain is only enabled for BR2_ARM_CPU_ARMV7A which is
mutually exclusive with BR2_ARM_CPU_ARMV8A.
Use ARMv7 toolchain for 32-bit software.
Cc: James Hilliard <james.hilliard1@gmail.com>
Reported-by: Oscar Gomez Fuente <oscargomezf@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 350772148f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix libexecinfo workaround to avoid the following ffmpeg build failure
with BR2_PACKAGE_RPI_USERLAND raised on uclibc and musl since commit
bc4cc27705:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/arm-linux-gcc --sysroot=/home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot -mcpu=arm926ej-s -Wl,--as-needed -Wl,-z,noexecstack -o /tmp/ffconf.5K0cMIh3/test /tmp/ffconf.5K0cMIh3/test.o -lmmal_core -lmmal_util -lmmal_vc_client -lbcm_host -latomic
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace_symbols'
[...]
ERROR: mmal not found
Fixes:
- http://autobuild.buildroot.org/results/64d21872d25fef35b72106133ed2aed300f52f2f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 66d7d3bec3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to use the separate package for the chromium submodule
which has python3 support patches.
We also need to apply a patch to qt5webengine to allow building with
python3.
Drop a patch which is now upstream.
We need to set QT5WEBENGINE_SYNC_QT_HEADERS = YES as we are building
from a repository archive instead of a release archive.
We need to add some new required dependencies to qt5webengine so that
it will build.
Switch libraries to system libraries instead of bundled when possible.
Migrate unsupported WEBENGINE_CONFIG to new config flag option.
Override feature detection using config override flags to ensure we
get the expected features enabled/disabled as autodetection logic
may otherwise disable features without throwing build errors.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 675cbaf9aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to add a separate package for the chromium submodule so that
we can apply patches for python3 support to it and replace catapult
with a python3 compatible version.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 577d886886)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version of catapult is python3 compatible and will be used to
replace the python2 only version in qt5webengine-chromium.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dbaee8e456)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without CA bundle curl can not verify the remote peer and work with https.
This is fixed by adding a config option pointing to the default location
for CA bundle in buildroot. Alternatives like OpenSSL and MbedTLS use the
same path, however the wolfSSL build options for libcurl did not include
this path until now.
Signed-off-by: Dimitar Tomov <dimi@tpm.dev>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b4d301c641)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following commit
e59b3acc36 ("toolchain/glibc: Restrict
ppc64le support to power8"), when selecting ppc64le as the
architecture, it is possible to end up with a selection for which no C
library is provided.
Indeed:
- glibc only supports Power8
- uclibc has no support for ppc64le at all
- musl only supports ppc64le processors that have Altivec support
Therefore, this commit adds "depends on !BR2_powerpc64le" to those
PowerPC architecture variants for which no C library support exists.
Fixes:
http://autobuild.buildroot.net/results/3f6fb1c2d5648e78f7856bdea3171b5a89dfa2f9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c0b0288314)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mono unconditionally uses pthread_attr_get_np and so needs NTPL since
version 4.0.1.43 and
748fefa1d7:
mono-threads-linux.c: In function 'mono_threads_platform_get_stack_bounds':
mono-threads-linux.c:26:15: error: implicit declaration of function 'pthread_getattr_np'; did you mean 'pthread_attr_init'? [-Werror=implicit-function-declaration]
26 | res = pthread_getattr_np (pthread_self (), &attr);
| ^~~~~~~~~~~~~~~~~~
| pthread_attr_init
Fixes:
- http://autobuild.buildroot.org/results/6534ee4ae699c17ee98f6f89a8a1212936e04481
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5471d7ce25)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gensio needs atomic since bump to version 2.0.1 in commit
0f8d4a6ecd and
5528267b54:
/nvmedata/autobuild/instance-7/output-1/per-package/gensio/host/bin/../lib/gcc/arc-buildroot-linux-uclibc/11.3.0/../../../../arc-buildroot-linux-uclibc/bin/ld: ../lib/.libs/libgensio.a(gensio_osops.o): in function `gensio_addr_dup':
gensio_osops.c:(.text+0x1558): undefined reference to `__atomic_fetch_add_4'
Fixes:
- http://autobuild.buildroot.org/results/229e4bd1ba1787953899875ab56721c9609f035a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 41498af0df)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure raised with pam and libressl:
auth-pam.c: In function 'pam_server':
auth-pam.c:894:23: error: 'PATH_MAX' undeclared (first use in this function); did you mean 'AF_MAX'?
894 | char ac_file_name[PATH_MAX];
| ^~~~~~~~
| AF_MAX
auth-pam.c:894:23: note: each undeclared identifier is reported only once for each function it appears in
auth-pam.c:894:10: warning: unused variable 'ac_file_name' [-Wunused-variable]
894 | char ac_file_name[PATH_MAX];
| ^~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/c8834fa5ddcac6fd22fc9406e10221e64cdb8856
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b79cefcb00)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sigsegv.c: In function 'sigsegv_handler':
sigsegv.c:225:75: error: 'mcontext_t' has no member named 'uc_regs';
did you mean 'gregs'?
((ucontext_t *) ucp)->uc_mcontext.uc_regs->gregs[1]
Musl defines pt_regs differently to glibc. Backport a patch from
upstream gnulib (the source for this file in diffutils).
Fixes:
http://autobuild.buildroot.net/results/1b40146436eb2b3500d0d8faef96b3374f8e5cda/
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2bee0f3459)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.11 includes security fixes to the crypto/rand, crypto/tls, os/exec,
and path/filepath packages, as well as bug fixes to the crypto/tls package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with argp-standalone and NLS raised
since commit 5430c8fedd:
configure:6091: /home/autobuild/autobuild/instance-3/output-1/host/bin/x86_64-buildroot-linux-musl-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -largp >&5
/home/autobuild/autobuild/instance-3/output-1/host/lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/../lib64/libargp.a(argp-parse.o): in function `argp_version_parser':
/home/autobuild/autobuild/instance-3/output-1/build/argp-standalone-1.4.1/argp-parse.c:181: undefined reference to `libintl_dgettext'
[...]
checking for library containing argp_parse... no
configure: error: An implementation of GNU Argp was not found, please install libargp
Fixes:
- http://autobuild.buildroot.org/results/3d2d9e27aabcd6763510238087fe25d5273d3535
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cb91d2e60f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes a build error when the host environment has GOOS set to
something other than "linux." For example,
cd ./buildroot
GOOS="js" make
This will cause a build failure. Override GOOS to be either empty for host
packages or set to "linux" for target packages.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8c585eb32d)
gtest unconditionally uses is_trivially_copy_constructible since
version 1.11.0 and
c13c27a513
So add a dependency on host gcc >= 4.9 for gmock to avoid the following
build failure since commit 9dfbbbb410:
In file included from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/internal/gtest-death-test-internal.h:39:0,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-death-test.h:41,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest.h:64,
from /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/src/gtest-all.cc:38:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-matchers.h: In static member function 'static constexpr bool testing::internal::MatcherBase<T>::IsInlined()':
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output-1/build/host-gtest-1.11.0/googletest/include/gtest/gtest-matchers.h:414:12: error: 'is_trivially_copy_constructible' is not a member of 'std'
std::is_trivially_copy_constructible<M>::value &&
^
Fixes:
- http://autobuild.buildroot.org/results/9d19a47deb80824eaa718d80f14b0afd5f9eb054
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 480d76342d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While reading the docs to find hooks, I completely missed the
LIBFOO_TARGET_FINALIZE_HOOKS one which was actually matching my
use-case.
Though it is documented in a subsection a few lines below, let's also
have it in the list of supported hooks so it's not hidden away.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit dd66a2f0b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-12 is starting to trickle down to some distros, like Archlinux.
gcc-12 has new warnings, and detects more cases of issues, like new
UAF cases, which is causing build issues in code that was previously
building fine, as reported in #14826:
In file included from sigchain.c:3:
In function 'xrealloc',
inlined from 'sigchain_push.isra' at sigchain.c:26:2:
subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
In that case, the kernel has already fixed their code, which is part of
5.17:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=52a9dab6d892763b2a8334a568bd4e2c1a6fde66
However, we can't easily carry that patch, because we don't know
whether the kernel the user uses already has the fix or not.
Instead, we can just tell the kernel to disable use of -Werror when
building host tools.
As a consequence, we can drop it from the perf-specific setting.
Fixes: #14826
Reported-by: Anders Pitman <buildroot@apitman.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit baa55a4e26)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some constraints on a setup ended up with a plus sign in the path
for historical reasons and would then fail to match on the comparison
of the host/lib dir match. So, the =~ for bash can be augmented
with a double quote expansion to preserve the literal value of
the characters in the variable.
Example Path: /home/vagrant/test+buildroot/per-package
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2a9ef1f572)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default the toolchain-wrapper enable -fPIE to the build of all packages.
TF-A support Position Independent Executable(PIE) only in few build cases,
therefore it should be disable by default.
If you still want to enable PIE, TF-A provide a "ENABLE_PIE" build options
that will override the cflags for the supported cases.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[Peter: Only do so for BR2_PIC_PIE]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1061ed6c62)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.2.5 was released on May 16, 2022: this is a bug-fix release,
fixing two issues with libgsasl authentication.
Mutt 2.2.4 was released on April 30, 2022: this is a bug-fix release,
fixing some regressions with Maildir/mh mailbox path normalization that
were added in 2.2.0. Please see the UPDATING file for more details.
https://gitlab.com/muttmua/mutt/-/blob/mutt-2-2-5-rel/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bb7182c3e3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2022-29162
Minor security issue (which appears to not be exploitable) related to process
capabilities.
A bug was found in runc where runc exec --cap executed processes with ble Linux
process capabilities, creating an atypical Linux environment. For more
information, see GHSA-f3fp-gc8g-vw66 and CVE-2022-29162.
runc spec no longer sets any inheritable capabilities in the created example OCI
spec (config.json) file.
https://github.com/opencontainers/runc/releases/tag/v1.1.2
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0295e9602f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 1.5 in
commit 41bbe8df54 and
be55282d71:
In file included from /nvmedata/autobuild/instance-22/output-1/host/bin/../sparc-buildroot-linux-uclibc/sysroot/usr/include/glib-2.0/glib.h:62,
from src/verity_hash.c:26:
src/verity_hash.c: In function 'verify_zero':
src/verity_hash.c:69:55: error: expected ')' before 'PRIu64'
69 | g_message("Spare area is not zeroed at position %" PRIu64 ".",
| ^~~~~~
Fixes:
- http://autobuild.buildroot.org/results/1a093c0e194a061836884419d2f50506105db01e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ea79360907)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to a new major release which brings in improvements and a few new
features. Release notes:
https://wpewebkit.org/release/wpewebkit-2.36.0.html
None of the new features need additional dependencies. The build option
USE_SYSTEMD has been renamed to ENABLE_JOURNALD_LOG, though.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7d258f81cd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If enabled at build time, WebKit's internal nested compositor can work
more efficiently when targeting Wayland, by avoiding one unneeded buffer
copy. The build option has been available for a few years in WebKitGTK
releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7e8f0d95a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arc-buildroot-linux-uclibc/10.2.0/../../../../arc-buildroot-linux-uclibc/bin/ld: ../lib/.libs/libboinc.a(libboinc_la-diagnostics.o): in function `boinc_catch_signal':
diagnostics.cpp:(.text+0x8a): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/4504379b464eb144a4c257001eb4d316bb1f5e44
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9e48c2d5f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-29338: Integer Overflow in OpenJPEG v2.4.0 allows remote
attackers to crash the application, causing a Denial of Service (DoS).
This occurs when the attacker uses the command line option "-ImgDir" on
a directory that contains 1048576 files.
Fix CVE-2022-1122: A flaw was found in the opj2_decompress program in
openjpeg2 2.4.0 in the way it handles an input directory with a large
number of files. When it fails to allocate a buffer to store the
filenames of the input directory, it calls free() on an uninitialized
pointer, leading to a segmentation fault and a denial of service.
Drop patches (already in version)
https://github.com/uclouvain/openjpeg/blob/v2.5.0/NEWS.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 636f201062)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-1619: Heap-based Buffer Overflow in function
cmdline_erase_chars in GitHub repository vim/vim prior to 8.2.4899. This
vulnerabilities are capable of crashing software, modify memory, and
possible remote execution
Fix CVE-2022-1620: NULL Pointer Dereference in function
vim_regexec_string at regexp.c:2729 in GitHub repository vim/vim prior
to 8.2.4901. NULL Pointer Dereference in function vim_regexec_string at
regexp.c:2729 allows attackers to cause a denial of service (application
crash) via a crafted input.
Fix CVE-2022-1621: Heap buffer overflow in vim_strncpy find_word in
GitHub repository vim/vim prior to 8.2.4919. This vulnerability is
capable of crashing software, Bypass Protection Mechanism, Modify
Memory, and possible remote execution
Fix CVE-2022-1629: Buffer Over-read in function find_next_quote in
GitHub repository vim/vim prior to 8.2.4925. This vulnerabilities are
capable of crashing software, Modify Memory, and possible remote
execution
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit da66811e8e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extract from
1bc60d4ba2:
"NOTE TO MAINTAINERS: libee is not used by rsyslog for quite some while.
However, we never included this info into the changelog. So if you still
make rsyslog depend on libee (some do this), you should stop doing so
now. Libee is dead and no longer been maintained nor hosted by us."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 55d164bf5d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the change of the range of UIDs that is generated from the
automatic ID (-1), it became apparent that there is a potential problem
with these automatic IDs when upgrading: they may have changed, which
means that persistent files that exist outside of the rootfs suddenly
have a different owner.
Add a caveat section to the manual, as well as an explanation of how to
work around the problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: slight rewording]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8b51205638)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure:
In file included from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/sysroot/usr/include/pthread.h:31,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/armeb-buildroot-linux-musleabi/bits/gthr-default.h:35,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/armeb-buildroot-linux-musleabi/bits/gthr.h:148,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/ext/atomicity.h:35,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/bits/basic_string.h:39,
from /nvmedata/autobuild/instance-12/output-1/per-package/libfreeimage/host/armeb-buildroot-linux-musleabi/include/c++/9.4.0/string:55,
from Source/Utilities.h:44,
from Source/FreeImage/PluginPSD.cpp:27:
Source/FreeImage/PluginPSD.cpp: In function 'BOOL Save(FreeImageIO*, FIBITMAP*, fi_handle, int, int, void*)':
Source/FreeImage/PluginPSD.cpp:130:10: error: cannot convert 'std::nullptr_t' to 'BOOL' {aka 'int'} in return
130 | return NULL;
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/f9c4ba83a506d374d8a28673aac619d8ff80f3da
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d3ee0c781e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some corporate networks may be blocking access to Russian servers.
The server "strace.io" is in Russia, which will make it inaccessible
from some networks.
Use Github instead to download the sources.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 45115ea557)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On x86_64, libssl is a dependency for kselftests. selftests/sgx depends on
it. Thus, select it in "Config.in", and add it as a build dependency in
"linux-tool-selftests.mk.in".
Link: https://lore.kernel.org/buildroot/20220517224809.21f77949@gmx.net/
Suggested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
[yann.morin.1998@free.fr:
- in .mk: change condition to be on package being selected
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit de77516a2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prompt and variable name for the OCI "entrypoint arguments" are
somewhat incorrect. Indeed, they are in fact used to set the image
"command". Yet, using "command" would be confusing too, because the
interplay between entrypoint and command is tricky [0].
TL-DR; when both entrrypoint and command are set, command acts as
arguments passed to the entrypoint.
Additionally, we currently can only pass a single item as either
entrypoint or command. This precludes passing actual arguments to the
entrypoint, or passing multiple arguments as command.
For example:
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT="/bin/tini -g -p SIGTERM --"
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS="/usr/bin/env sh"
generates an images with (only relevant fields are included below):
{
"config": {
"Entrypoint": [ "/bin/tini -g -p SIGTERM --" ],
"Cmd": [ "/usr/bin/env sh" ]
}
}
This is obviously incorrect, and not what one would expect:
{
"config": {
"Entrypoint": [ "/bin/tini", "-g", "-p", "SIGTERM", "--" ],
"Cmd": [ "/usr/bin/env", "sh" ]
}
}
However, some people do want to be able to pass an actual shell
scriptlet as a command, such as:
{
"config": {
"Entrypoint": [ "/bin/sh", "-c" ],
"Cmd": [ "my shell logic goes here" ]
}
}
Handling both is obviously conflicting: we can't both split-on-spaces
and not-split-on-spaces at the same time...
So, we fix that in two ways:
- make the current _OCI_ENTRYPOINT_ARGS a legacy option, and introduce
the new _OCI_CMD option with different semantics (see below) and an
appropriate prompt;
- we interpret both _OCI_ENTRYPOINT and _OCI_CMD as shell strings,
which we subject to the usual shell quoting [1] and token
recognition [2];
Since _OCI_ENTRYPOINT_ARGS used to be interpreted as a single string, we
can't easily change its meaning to be a space-separated list, as that
would break existing setups, which is the reason we make it legacy and
introduce a new option.
Ideally, we would like to default the new option _OCI_CMD to be the
quoted value of the previous _OCI_ENTRYPOINT_ARGS, but this is not
possible in Kconfig. Still, users that had a _OCI_ENTRYPOINT_ARGS set
will now get an early build error, and can still detect they need to do
something about it.
As for _OCI_ENTRYPOINT, it does not make much sense to support both cases.
Indeed, without splitting on spaces, we'd end up with an entrypoint that
would have a single item:
{
"config": {
"entrypoint: [ "some string with some spaces" ]
}
}
which in this case would try to execute the program which name is
actually "some string with some spaces", so we do not expect that
existing entrypoints are set with any space in them, and so the new
behaviour, unlike for _OCI_ENTRYPOINT_ARGS vs. _OCI_CMD, is compatible
with existing configurations, and so we do not need to make it a legacy
option and introduce a new one.
[0] https://docs.docker.com/engine/reference/builder/#understand-how-cmd-and-entrypoint-interact
[1] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_02
[2] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_03
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 08d65d81d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
duktape can't be used with BR2_OPTIMIZE_FAST resulting in the following
build failure in polkit:
In file included from /nvmedata/autobuild/instance-27/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/include/duktape.h:202,
from ../src/polkitbackend/polkitbackendduktapeauthority.c:28:
/nvmedata/autobuild/instance-27/output-1/host/aarch64_be-buildroot-linux-gnu/sysroot/usr/include/duk_config.h:2893:2: error: #error __FAST_MATH__ defined, refusing to compile
2893 | #error __FAST_MATH__ defined, refusing to compile
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/587485bcfd85dfd974608aa00b9bd0c42a3a61d8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c1dcf18c8d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream Makefile failed to detect systemd being present in some (maybe all)
builds, resulting in the unit file not being installed. Without the unit file,
the udev rules in usb_modeswitch-data don't work as expected (no modeswitch is
performed).
This commit adds a patch that modifies the Makefile to include
'$(PREFIX)/bin/systemctl' in the list of paths checked, which makes the
installation phase work as intended. I will also submit this patch upstream.
Signed-off-by: Sol Bekic <s+removethis@s-ol.nu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c6b746e6fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libks needs NPTL since its addition in commit
5752d18bfc:
/nvmedata/autobuild/instance-17/output-1/build/libks-1.8.0/src/ks_thread.c: In function 'thread_launch':
/nvmedata/autobuild/instance-17/output-1/build/libks-1.8.0/src/ks_thread.c:237:21: error: 'pthread_setname_np' undeclared (first use in this function); did you mean 'pthread_setcanceltype'?
237 | if (thread->tag && pthread_setname_np)
| ^~~~~~~~~~~~~~~~~~
| pthread_setcanceltype
Fixes:
- http://autobuild.buildroot.org/results/8a93b75ee51e005383eac17aa7577b43eda4cd92
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 91600a62af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-24882: FreeRDP is a free implementation of the Remote
Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager
(NTLM) authentication does not properly abort when someone provides and
empty password value. This issue affects FreeRDP based RDP Server
implementations. RDP clients are not affected. The vulnerability is
patched in FreeRDP 2.7.0. There are currently no known workarounds.
Fix CVE-2022-24883: FreeRDP is a free implementation of the Remote
Desktop Protocol (RDP). Prior to version 2.7.0, server side
authentication against a `SAM` file might be successful for invalid
credentials if the server has configured an invalid `SAM` file path.
FreeRDP based clients are not affected. RDP server implementations using
FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0
contains a fix for this issue. As a workaround, use custom
authentication via `HashCallback` and/or ensure the `SAM` database path
configured is valid and the application has file handles left.
https://github.com/FreeRDP/FreeRDP/releases/tag/2.7.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ecaca2d01e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent commit f0c7cb01a9 (package/pkg-download: do not try to vendor
_EXTRA_DOWNLOADS) got last-minute changes when applied, which changed
the expected behaviour for packages that do not have a main download.
Before f0c7cb01a9, the dl-wrapper would not even be called for those
packages, and the original patch that was sent also avoided downloading
such packages, but f0c7cb01a9 now causes the dl-wrapper to be called.
It is however an accident that the dl-wrapper does not fail. Indeed, it
is expected to fail if no download was successful; we pass no URI, so
the dl-wrapper should have failed, as it basically does:
download_and_check=0
for uri in "${uris[@]}"; do
...
done
if [ "${download_and_check}" -eq 0 ]; then
exit 1
fi
However, it does not even go that far...
Even though there is no output file, we still pass the path to the
package output directory as the output path. So, to avoid downloading
files already present, the wrapper checks if the output file exists,
and checks its hash:
if [ -e "${output}" ]; then
if support/download/check-hash ${quiet} "${hfile}" "${output}" ...
exit 0
...
fi
The output path does exist now, because we explicitly create it just
before calling the wrapper, because that's where we also locate the
lockfile.
So it ends up trying to validate the hash of a directory, but it fails
to, as there is indeed no hash file for that package. And a missing hash
file is just a warning, not an error, which makes the download actually
a success...
So, this is currently working, and this is by pure luck.
However, there is a potential issue: if a target package is a virtual
package, but the host package is a real package, e.g. the same foo.mk
does (or the other way around):
HOST_FOO_VERSION = 1.2.3
HOST_FOO_SITE = http://example.net/
$(eval $(virtual-package))
$(eval $(host-generic-package))
If there is a hash file to validate the host download, then the current
situation will cause a failure, because there would be a hash file, but
no hash for the output path of the target variant, which would then be
a hard-error.
So, revert to the behaviour from before f0c7cb01a9, where no download
is attempted for a package without a source (really, without a main
download, now).
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d95a6dac31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default defconfig target for the 64 bit powerpc kernel is
ppc64_defconfig, the big endian configuration.
When building for powerpc64le users want the little endian kernel as
they can't boot LE userspace on a BE kernel.
Fix up the defconfig used in this case. This will avoid the following
autobuilder failure:
VDSO32A arch/powerpc/kernel/vdso32/sigtramp.o
cc1: error: ‘-m32’ not supported in this configuratioin
make[4]: *** [arch/powerpc/kernel/vdso32/Makefile:49: arch/powerpc/kernel/vdso32/sigtramp.o] Error 1
http://autobuild.buildroot.net/results/dd76d53bab56470c0b83e296872d7bb90f9e8296/
Note that the failure indicates the toolchain is configured to disable
the 32 bit target, causing the kernel to fail when building the 32 bit
VDSO. This is only a problem on the BE kernel as the LE kernel disables
CONFIG_COMPAT, aka 32 bit userspace support, by default.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 62044e8675)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump package revision to pull various fixes for v5.1 - v5.17 kernels.
Patch that disables verbose debug is no more compatible with updated
driver since build flags in Makefile has been changed. Drop it.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 25956b29e4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
numactl unconditionally uses __atomic_fetch_and resulting in the
following build failure on architectures that need libatomic to provide
atomic intrinsics (e.g. microblaze) since commit
4ed540ddf5:
/nvmedata/autobuild/instance-5/output-1/host/lib/gcc/microblaze-buildroot-linux-uclibc/10.3.0/../../../../microblaze-buildroot-linux-uclibc/bin/ld: ./.libs/libnuma.a(libnuma.o): in function `numa_node_to_cpus_v1':
(.text+0x2a34): undefined reference to `__atomic_fetch_and_1'
Fixes:
- http://autobuild.buildroot.org/results/e225cb83dae390d9dc543d4da85c52180efbd40a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5ade3ecdb8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by [1], the lxc test is broken since lxc >= 4.0.11.
A patch was added to lxc 4.0.11 to use the new mount api for devpts
setup [2] but the fall back code doesn't work when this new mount
API is not supported. This API was added in kernel 5.6.
(kernel 5.5)
DEBUG conf - conf.c:lxc_setup_devpts_child:1682 - No new devpts instance will be
mounted since no pts devices are required
lxc-start lxc_iperf3 DEBUG conf - conf.c:lxc_setup_dev_console:1966 - Cleared
all (0) mounts from "/dev/console"
lxc-start lxc_iperf3 ERROR mount_utils - mount_utils.c:mount_at:661 - No such
file or directory - Failed to mount "/proc/self/fd/44" to "/proc/self/fd/43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_dev_console:1988 - No such
file or directory - Failed to mount "10(/dev/pts/0)" on "43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_console:2143 - No such file
or directory - Failed to setup console
(kernel 5.6)
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:can_use_mount_api:582 -
Kernel supports mount api
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:move_detached_mount:328
- Attach detached mount 45 to filesystem at 43
lxc-start lxc_iperf3 TRACE conf - conf.c:lxc_setup_dev_console:1990 - Setup
console "/dev/pts/0"
Bump the kernel to the current LTS 5.15.38 version that fully support the
mount API needed by lxc.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429013708
[1] http://lists.busybox.net/pipermail/buildroot/2022-January/635251.html
[2] be606e16fd
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ca135c9939)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the very beginning, libunistring was a mandatory dependency of
gnutls. However, it would use its internal copy if libunistring was not
selected. We never want that, so make libunistring an actual mandatory
dependency.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3292f87412)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 3.7.4 added compression options with brotli, zlib and zstd.
These are automatically discovered, which makes their inclusion depend
on the build order. Therefore, explicitly enable/disable them.
Note that the configure help text says "--without-brotli" and
"--without-zstd", but the options are actually --without-libbrotli and
--without-libzstd. --without-zlib is correct in the help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 91354636e6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option is set a few lines below depending on
BR2_PACKAGE_GNUTLS_OPENSSL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: move it all under a single conditional block]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 91b10ec79a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pcre/libregex dependency was removed in version 3.7.3 with upstream
commit 26578b7d02c269ff1d34ff782d84c7667734d03d, which removed the
bundled libopts. Remove the pcre dependency and the relevant CONF_OPTS
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 00a046e455)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls's configure script has a weird approach where it first searches
for dependent libraries in the path specified by --prefix, before
searching in the default search path. Since we set --prefix to /usr,
and it doesn't take into account DESTDIR (which is anyway not set at
configure time), that means it will first search /usr/lib before
searching $(STAGING_DIR)/usr/lib.
Ideally, this would be fixed in the configure script itself. However,
the m4 file that does this is pretty complex, it's not immediately clear
where to add $DESTDIR. In addition it comes from gnulib which is a
somewhat annoying upstream.
Therefore, instead, bypass the prefix lookup with
--without-libfoo-prefix. Note that we could set
--with-libfoo-prefix=$(STAGING_DIR)/usr (the latter is already done for
librt and libpthread), but that's pretty pointless -
--without-libfoo-prefix in fact reverts to what should have been done in
the first place, i.e. use the toolchain search path.
Add --without-libfoo-prefix for all options defined in configure (found
with ./configure --help | grep without-.*-prefix). Most of these are
only used in tests (e.g. libcrypto) or even not at all (e.g. libiconv),
but it's fairly hard to discover this and to be sure that they are
indeed not needed, so better pass all of them.
Remove the now-redundant arguments for librt and libpthread.
Add a comment to remind people to revisit these when bumping the
version.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b707a67daa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One per line, and alphabetical (was already the case for host).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: all host dependencies first]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fb5aad3024)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Includes security fixes to the syscall package, as well as bug fixes to the
compiler, runtime, and the crypto/x509 and net/http/httptest packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/a6c7dd171529e2a7b7a26af8d99bec53117a7a02/
Commit fd5842a1dd (boot/shim: add
BR2_PACKAGE_SHIM_ARCH_SUPPORTS) added explicit support for big/little endian
arm/aarch64, but the shim code is hard coded for little endian:
head -n 1 elf_{arm,aarch64}_efi.lds
==> elf_arm_efi.lds <==
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
==> elf_aarch64_efi.lds <==
OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
So drop the support for the big endian variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0ebbf0b280)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5.
This issue leads to a segmentation fault and possibly arbitrary code
execution via a specially crafted filesystem.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3ef096786a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu106-revA evaluation board.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
This patch was build and run tested on a zynqmp-zcu106-revA target board.
Upstream-Status: submitted (https://lore.kernel.org/all/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8125300088)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent changes in libusb have exposed a bug in OpenOCD which now crash when trying
to use the ST-Link driver.
Upstream has a fix as commit cff0e417da58adef1ceef9a63a99412c2cc87ff3. This add the commit
as a stand alone patch. The crash also happen on Linux, which was not mentionned in that
commit message.
Should be removed when OpenOCD is updated to a release newer than 0.11
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4239958963)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For golang- or cargo-based packages, we apply a vendoring pass after the
package's "main" download is done. Whether to vendor or not is based on
the heuristic that a specific directory exists or not; for golang
packages, we look for '/vendor', while for cargo, we look for '/VENDOR'.
This is fine for the "main" (by lack of a better term) download, but
this falls flat on its face for extra downloads. Indeed, some packages
may need to download data sets, or assets, as _EXTRA_DOWNLOADS. Those
are usually just data blobs, and are not actual golang or cargo packages;
as such they do not need to be vendored, but worse, if we try to
actually vendor them, this fails because the required files for
vendoring are missing from the archives in such data sets.
We fix that by decoupling the download for the extra download, from the
download for the main archive. We pass the post-processing option only
to the main download.
This makes the hard assumption that extra downloads will never need to
be post-processed for vendoring, of course; we hope this will always be
correct in practice. If not, we can fix it later.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout:
- no loop needed for MAIN_DOWNLOAD, it can have only one;
- remove superfluous backslash in the definition of MAIN_DOWNLOAD;
- introduce _ADDITIONAL_DOWNLOADS to avoid filter-out.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f0c7cb01a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was already disabled for target packages in:
12ba356365
We need to disable wrap downloads for host meson packages as well.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5c2f0c698c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu106_defconfig pmufw to 2022.1.
The pm_cfg_obj.c has not changed between 2021.2 and 2022.1.
The pmufw_v2022.1.bin has been tested on a zcu106 board.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 27c672e53a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu102_defconfig pmufw to 2022.1.
The pm_cfg_obj.c has not changed between 2021.2 and 2022.1.
The pmufw_v2022.1.bin has been tested on a zcu102 board.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b044be10f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- The c_rehash script allows command injection (CVE-2022-1292)
The c_rehash script does not properly sanitise shell metacharacters to
prevent command injection. This script is distributed by some operating
systems in a manner where it is automatically executed. On such operating
systems, an attacker could execute arbitrary commands with the privileges of
the script.
Use of the c_rehash script is considered obsolete and should be replaced by
the OpenSSL rehash command line tool.
https://www.openssl.org/news/secadv/20220503.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 96a4aee289)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch migrates configs/zynqmp_zcu106_defconfig to tarballs for TF-A, u-boot and Linux.
This patch has zero change in code running on the device.
The goal is to improve build speed and align with the zynq_xxx_defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ac05c0d68d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch migrates configs/zynqmp_zcu102_defconfig to tarballs for TF-A, u-boot and Linux.
This patch has zero change in code running on the device.
The goal is to improve build speed and align with the zynq_xxx_defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 56539c5c93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can't enable lua and luajit at the same time as they both provide
the virtual luainterpreter package.
Fixes:
package/luajit/luajit.mk:80: *** Configuration error: both "luajit" and "lua" are selected as providers for virtual package "luainterpreter". Only one provider can be selected at a time. Please fix your configuration. Stop.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e11431dd61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2022-29824] Integer overflow in xmlBuf and xmlBuffer
- Fix potential double-free in xmlXPtrStringRangeFunction
- Fix memory leak in xmlFindCharEncodingHandler
- Normalize XPath strings in-place
- Prevent integer-overflow in htmlSkipBlankChars() and xmlSkipBlankChars() (David Kilzer)
- Fix leak of xmlElementContent (David Kilzer)
For more details, see the release notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.9.14
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4dd01598c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently pillow doesn't correctly search pkg-config system paths
for some libraries which can prevent some libraries from being
properly detected/enabled in pillow.
This is due to pillow implementing custom header validation
checks which need system paths present to function correctly:
https://github.com/python-pillow/Pillow/blob/9.0.1/setup.py#L633
Removed custom BUILD_CMDS and INSTALL_TARGET_CMDS which were
causing python-pillow to be installed for the host, they are
not required, we just need to set build_ext at the start
of PYTHON_PILLOW_BUILD_OPTS instead.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 10664068b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu106_defconfig to Xilinx software release 2022.1
which includes the following updates:
- TF-A release version 2.6
- U-Boot release version 2022.01
- Linux kernel release version 5.15.19
It is better to use a Xilinx official release version than sha tags.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit df0a0ae9d9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynqmp_zcu102_defconfig to Xilinx software release 2022.1
which includes the following updates:
- TF-A release version 2.6
- U-Boot release version 2022.01
- Linux kernel release version 5.15.19
It is better to use a Xilinx official release version than sha tags.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b935f46a9b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Github rockchip-linux doesn't provide libmali repository anymore and the
only up-to-date and maintained repository I've found is JeffyCN/mirrors
branch libmali that provide the identical situtation we were at with
previous repository, so let's switch to JeffyCN repository. This fixes
a build failure while trying to install rockchip-mali.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8c25838b53)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CONFIG_CRYPTO_AEAD2=y.
CONFIG_CRYPTO_AEAD2 and CONFIG_CRYPTO_SKCIPHER2 are needed to fix the
following build failure:
ERROR: modpost: "crypto_alloc_skcipher" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "scatterwalk_map_and_copy" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_ahash_final" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_encrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_setkey" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_skcipher_decrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_destroy_tfm" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_skcipher_setkey" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_decrypt" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
ERROR: modpost: "crypto_aead_setauthsize" [/home/autobuild/autobuild/instance-2/output-1/build/cryptodev-linux-1.12/./cryptodev.ko] undefined!
However, those options are not user-selectable. They are enabled by the
appropriate consumers of those cyphers. Since cryptodev is anyway meant
to give userspace access to kernel crypto (hardware), it makes sense to
enable CONFIG_CRYPTO. The easiest way to also get AEAD2 and SKCIPHER2 is
to enable CONFIG_CRYPTO_USER_API_AEAD as well.
Fixes:
- http://autobuild.buildroot.org/results/a06708369c233f6e60a1a3ffd7a77a4edd932c9a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4b12336d1f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog: https://curl.se/changes.html
Updated license hash due to copyright year bump:
0409192b1f
The NSS crypto backend requires a special option now, without it
configure errors out with:
configure: error: NSS use must be confirmed using --with-nss-deprecated. NSS support will be dropped from curl in August 2022. See docs/DEPRECATE.md
Since it will be removed entirely soon anyway, and since this version
doesn't fix any CVEs so doesn't need to be backported to stable
branches, drop the NSS option entirely.
Since NSS is going to be removed soon, drop the --without-nss as well.
It is never going to be enabled automatically.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: drop NSS option entirely, as suggested by Baruch Siach.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8afb945bf0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 8e91385a2c.
This commit is incorrect, as it is perfectly valid for
BR2_TOOLCHAIN_EXTERNAL_PATH to be empty. The help text of
BR2_TOOLCHAIN_EXTERNAL_PATH even documents it as a supported case:
If empty, the compiler will be searched in $PATH.
Commit 392b0a26f5 ("toolchain-external:
default BR2_TOOLCHAIN_EXTERNAL_PATH to empty") even made that the
default saying "In addition, it in fact works correctly when it is
empty. In that case, the toolchain will be searched in PATH."
A user has reported that commit
8945ba4948 (the backport of 8e91385a2c to
the 2022.02.x LTS branch) breaks his use-case:
https://lore.kernel.org/buildroot/CADBnMvhgaozAgZgy3njckjL1i0U6bZ0fLrq-kdFF-qpGhFWgmw@mail.gmail.com/
Reported-by: Kristof Havasi <havasiefr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: reference 8e91385a2c on master]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 77fc458025)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the bump of elf2flt to version 2021.08, the issue with
recent versions of binutils has been fixed, so we can re-enable using
the recent binutils versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 44b9361a2e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It contains several fixes and improvements compared to our current
version, and two of our patches have been accepted upstream. Most
notably, it fixes the issue we had in using elf2flt with recent
versions of binutils (upstream commit
ba379d08bb78c9300e84351c11080c26ddcc36b3).
Patch 0001-ld-elf2flt-behave-properly-when-called-with-a-name-d.patch
is upstream as of commit 1c9b454336eaf38f7d037917a3120fae04193fbe
Patch 0002-elf2flt.c-add-new-relocation-types-for-xtensa.patch is
upstream as of commit d7eb73163bcea31168c438fc132a0967ac172e3d
The other two patches are refreshed to apply properly on 2021.08.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 65d78dcfeb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The afboot-stm32 build system was initially linking with gcc, but that
was changed upstream following a Buildroot contribution to use ld
instead.
However, the build system was still passing -nostartfiles, which is a
gcc option. By luck, this option was simply ignored by older versions
of ld (such as binutils 2.32), but newer versions of ld (2.36 and
newer, at least) no longer accept/ignore this option.
This commit adds a patch that drops the use of this option, since it
is useless for ld.
The first patch is slightly updated because the upstream pull request
has been updated to contain both build fixes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cf5206ea98)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable builtin harfbuzz which is enabled by default since bump to
version 2.0.18 in commit f4da031a77 and
834ec54127
resulting in the following build failure without threads:
In file included from external/harfbuzz-2.8.0/src/hb.hh:470,
from external/harfbuzz-2.8.0/src/hb-aat-layout.cc:28:
external/harfbuzz-2.8.0/src/hb-mutex.hh:53:10: fatal error: pthread.h: No such file or directory
53 | #include <pthread.h>
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ac8b366558bec61ada84ec15cf27652fde2b63b2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2449d9c9dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-1381: global heap buffer overflow in skip_range in GitHub
repository vim/vim prior to 8.2.4763. This vulnerability is capable of
crashing software, Bypass Protection Mechanism, Modify Memory, and
possible remote execution
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8c76fc9d1c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HPA's tftp server init script does not support include of a
configuration file. So changing daemon parameters would cause
a modification of the init script.
Similar to NFS, dropbear, DHCP, SNMP and other network services
in buildroot, this patch adds an include of /etc/default/tftpd
to the init script. So any user can change the default behaviour
by adding its own configuration file instead of changing the init
script.
Signed-off-by: Andreas Ehmanns <universeiii@gmx.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 61bfaf0354)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Moved groups render and sgx from UDEV_USERS to SYSTEMD_USERS as they
currently only appear in systemd's udev rules.
In systemd, group render was introduced since commit 4e15a73, and group
sgx was introduced since commit c9c4899.
In eudev, group render was introduced since commit bb070c1, but was
removed since commit a8ffcd1 [1].
[1]: https://github.com/eudev-project/eudev/issues/160
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Carlos Santos <unixmania@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6d163e12a4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On m68k building with optimizations results in failures such as:
/tmp/cckiMnG5.s: Assembler messages:
/tmp/cckiMnG5.s:142572: Error: value -39206 out of range
/tmp/cckiMnG5.s:142629: Error: value -40282 out of range
/tmp/cckiMnG5.s:146408: Error: value -53294 out of range
/tmp/cckiMnG5.s:159014: Error: value -39206 out of range
/tmp/cckiMnG5.s:159071: Error: value -40282 out of range
/tmp/cckiMnG5.s:162850: Error: value -53294 out of range
/tmp/cckiMnG5.s:175456: Error: value -39206 out of range
/tmp/cckiMnG5.s:175513: Error: value -40282 out of range
/tmp/cckiMnG5.s:179292: Error: value -53294 out of range
/tmp/cckiMnG5.s:191898: Error: value -39206 out of range
/tmp/cckiMnG5.s:191955: Error: value -40282 out of range
/tmp/cckiMnG5.s:195734: Error: value -53294 out of range
These only appear when building with -O2, the smaller code generated
with -Os does not cause trouble, so workaround by using that.
Fixes:
http://autobuild.buildroot.net/results/2f222d5a86b4237b81ca31dba89f58b0e6e879db/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8915f51cc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force LibUSB_VERSION_1.0 to ON to fix the following static build failure
with libusb and libatomic:
-- Looking for libusb_get_device_list in /nvmedata/autobuild/instance-4/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libusb-1.0.a
-- Looking for libusb_get_device_list in /nvmedata/autobuild/instance-4/output-1/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libusb-1.0.a - not found
[...]
/nvmedata/autobuild/instance-4/output-1/build/openobex-1.7.2/lib/transport/usbobex.h:30:10: fatal error: usb.h: No such file or directory
30 | #include <usb.h>
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/52b0edc4278f65fb4a9671b65c655cc4544a3103
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d608368e1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure:
/nvmedata/autobuild/instance-15/output-1/per-package/ltp-testsuite/host/bin/../lib/gcc/mipsel-buildroot-linux-uclibc/10.3.0/../../../../mipsel-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-15/output-1/per-package/ltp-testsuite/host/bin/../mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(syslog.os): in function `openlog':
syslog.c:(.text+0x6b8): multiple definition of `openlog'; /tmp/ccvRnqfT.o:/nvmedata/autobuild/instance-15/output-1/build/ltp-testsuite-20220121/testcases/kernel/fs/fs-bench/random-access.c:14: first defined here
Fixes:
- http://autobuild.buildroot.org/results/bfd0d906a05564a4f323db604f3b908abf552b20
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e47efc9b90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace_symbols'
/home/giuliobenetti/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/giuliobenetti/autobuild/run/instance-2/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libvcos.so: undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/836348270d564a46cc9ee840cf87b2494cc82cec
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c97bc9a2e4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop override system locale patch which is now upstream.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9cf8f4e134)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl >= 3.4.1 raised since
commit 25ef2c26da:
In file included from eXtl_dtls.c:82:
/home/autobuild/autobuild/instance-4/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/openssl/ssl.h:1272:6: note: previous declaration of 'SSL_set0_rbio' was here
1272 | void SSL_set0_rbio(SSL *s, BIO *rbio);
| ^~~~~~~~~~~~~
eXtl_dtls.c: In function 'SSL_set0_rbio':
eXtl_dtls.c:108:17: error: invalid use of incomplete typedef 'SSL' {aka 'struct ssl_st'}
108 | BIO_free_all(s->rbio);
| ^~
Fixes:
- http://autobuild.buildroot.org/results/dfafdbf71b31fbda1b5ba491ac35239af4a20aa2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 034928ec5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link with -latomic if needed to avoid the following build failure since
bump to version 10.5.0 in commit
b5352c2177 and
c5c1a028cd:
/nvmedata/autobuild/instance-20/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-20/output-1/build/qpdf-10.5.0/libqpdf/build/.libs/libqpdf.a(QPDF.o): in function `QPDF::QPDF()':
QPDF.cc:(.text+0x4e44): undefined reference to `__atomic_fetch_add_8'
Fixes:
- http://autobuild.buildroot.org/results/b69e6e380c47bc64c6555899c2f61f57bdae7ecc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 25f56c5d60)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rtl_433 21.12 was discovered to contain a stack overflow in the function
acurite_00275rm_decode at /devices/acurite.c. This vulnerability allows
attackers to cause a Denial of Service (DoS) via a crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ba31730843)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass ac_cv_path_xmlconfig to fix the following build failure with
libxml2 raised since bump to version 0.102.0 in commit
007f49962a and
083ca38727:
aarch64-none-linux-gnu-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I/usr/include/libxml2'
In file included from /usr/include/libxml2/libxml/parser.h:810,
from others.c:62:
/usr/include/libxml2/libxml/encoding.h:31:10: fatal error: unicode/ucnv.h: No such file or directory
31 | #include <unicode/ucnv.h>
| ^~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/5bb3bea6d13ac8d497f6862374d65a59bea7ed09
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f5e4bb185a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl >= 2.7.0:
In file included from uams_dhx_passwd.c:35:
openssl_compat.h:15:19: error: static declaration of 'DH_set0_pqg' follows non-static declaration
15 | inline static int DH_set0_pqg(DH *dh, BIGNUM *p, BIGNUM *q, BIGNUM *g)
| ^~~~~~~~~~~
In file included from uams_dhx_passwd.c:33:
/home/autobuild/autobuild/instance-2/output-1/host/mips64-buildroot-linux-uclibc/sysroot/usr/include/openssl/dh.h:195:5: note: previous declaration of 'DH_set0_pqg' was here
195 | int DH_set0_pqg(DH *dh, BIGNUM *p, BIGNUM *q, BIGNUM *g);
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/fc6e308f346570f8198542602bc8c1bdd0a4869e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 2e8218f6aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SVG support needs host gcc >= 4.9 since bump of harfbuzz to version
3.1.2 in commit 6861933d22:
In file included from ../src/hb.hh:473:0,
from ../src/hb-buffer-serialize.cc:27:
../src/hb-vector.hh:206:20: error: 'is_trivially_copy_assignable' is not a member of 'std'
hb_enable_if (std::is_trivially_copy_assignable<T>::value)>
^
Fixes:
- http://autobuild.buildroot.org/results/7b2430c5ae4eed51685ec12bf778c07a0a8b1701
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e83eca4496)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable duktape with BR2_OPTIMIZE_FAST to fix the following build
failure:
In file included from content/handlers/javascript/duktape/duktape.h:195,
from build/Linux-framebuffer/duktape/application_cache.c:21:
content/handlers/javascript/duktape/duk_config.h:2861:2: error: #error __FAST_MATH__ defined, refusing to compile
2861 | #error __FAST_MATH__ defined, refusing to compile
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/2f1b42e2be3aa76cbacd84f3d0ad8b13edce6982
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit aa2a017ba9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of harfbuzz to version
3.1.2 in commit 6861933d22:
In file included from ../src/hb.hh:473:0,
from ../src/hb-buffer-verify.cc:27:
../src/hb-vector.hh:206:20: error: 'is_trivially_copy_assignable' is not a member of 'std'
hb_enable_if (std::is_trivially_copy_assignable<T>::value)>
^
Fixes:
- http://autobuild.buildroot.org/results/bbc48cb5232c617d4ff1d0bafd63bb3c9c72d556
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9f0c67179e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The link to at91.com is outdated and redirects to linux4sam.org
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 0d6b874d94)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following build failure is raised since commit
1745fcde74 because
$(HOST_PKG_PYTHON_DISTUTILS_ENV) contains $(HOST_CONFIGURE_OPTS) and so
will override LDFLAGS passed by libselinux.mk:
/usr/bin/gcc -O2 -I/nvmedata/autobuild/instance-11/output-1/host/include -I../include -D_GNU_SOURCE -DNO_ANDROID_BACKEND -L/nvmedata/autobuild/instance-11/output-1/host/lib -Wl,-rpath,/nvmedata/autobuild/instance-11/output-1/host/lib -shared -o libselinux.so.1 avc.lo avc_internal.lo avc_sidtab.lo booleans.lo callbacks.lo canonicalize_context.lo checkAccess.lo check_context.lo checkreqprot.lo compute_av.lo compute_create.lo compute_member.lo compute_relabel.lo compute_user.lo context.lo deny_unknown.lo disable.lo enabled.lo fgetfilecon.lo freecon.lo freeconary.lo fsetfilecon.lo get_context_list.lo get_default_type.lo get_initial_context.lo getenforce.lo getfilecon.lo getpeercon.lo init.lo is_customizable_type.lo label.lo label_db.lo label_file.lo label_media.lo label_support.lo label_x.lo lgetfilecon.lo load_policy.lo lsetfilecon.lo mapping.lo matchmediacon.lo matchpathcon.lo policyvers.lo procattr.lo query_user_context.lo regex.lo reject_unknown.lo selinux_check_securetty_context.l
o selinux_config.lo selinux_restorecon.lo sestatus.lo setenforce.lo setexecfilecon.lo setfilecon.lo setrans_client.lo seusers.lo sha1.lo stringrep.lo validatetrans.lo -ldl -Wl,-soname,libselinux.so.1,--version-script=libselinux.map,-z,defs,-z,relro
/usr/bin/ld: regex.lo: in function `regex_writef':
regex.c:(.text+0x7c): undefined reference to `pcre_fullinfo'
To fix this build failure, instead of moving LDFLAGS after
$(HOST_PKG_PYTHON_DISTUTILS_ENV), drop LDFLAGS and add host-pkgconf
dependency to retrieve pcre dependencies as pkg-config is supported
since version 3.2 and
74093beab0
Dropping LDFLAGS will also drop -lpthread which doesn't seem to raise
any build failures with test-pkg:
bootlin-armv5-uclibc [1/6]: OK
bootlin-armv7-glibc [2/6]: OK
bootlin-armv7m-uclibc [3/6]: SKIPPED
bootlin-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: SKIPPED
sourcery-arm [6/6]: SKIPPED
Apply the same update to the target variant for consistency.
Fixes:
- http://autobuild.buildroot.org/results/d16995f0decef9c9bf58cab4fa30f7daab6918fb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3bdfb5f5ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pamtester uses an archaic configure.in with archaic constructs. This
had generated a configure script that incorrectly tries to look for and
validate a C++ compiler:
checking for powerpc64le-buildroot-linux-gnu-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Calling autoreconf fixes the issue, as the generated configure no longer
tries to look for a C++ compiler at all anymore.
Fixes:
- http://autobuild.buildroot.org/results/c000aff659da024b6eef42bca824bdea7b5541c2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: expand commit log; add big-fat comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9993a36f5e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all SuperH cores have an MMU, and must use it, move back the
select BR2_ARCH_HAS_MMU_MANDATORY one level up.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ec190481a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until commit "arch/Config.in.sh: fixup MMU selection" in this series,
SH2A could either be used with BR2_USE_MMU disabled or BR2_USE_MMU
enabled.
The later made absolutely no sense, since SH2A does not have a MMU:
MMU support was introduced starting from SH3 according to
https://en.wikipedia.org/wiki/SuperH#SH-3
Also, since commit 22d5501e03 ("arch:
tidy up binary formats config"), which was merged in Buildroot
2015.05, the architecture tuple used when BR2_sh2a=y and BR2_USE_MMU
disabled is sh2a-buildroot-uclinux-uclibc, and this was already
unsupported back in the days of Buildroot 2015.08 and binutils 2.24,
causing the build to fail with:
*** BFD does not support target sh2a-buildroot-uclinux-uclibc.
just like it fails to build today with recent version of binutils.
So, this has been broken since 2015.08, and nobody complained. SH2A is
seldom used, so it's time to kill it.
It is worth mentioning that there had been an attempt at resurrecting
SH2 support around 2015 (see https://lwn.net/Articles/647636/) as part
of the J2 core. This effort led to the addition of FDPIC support for
SH2A in the musl C library (and therefore proper ELF binaries, with
shared libraries), but that was never supported in Buildroot. Now that
the J2 project is essentially dead, there is no reason to bother with
this.
Fixes:
http://autobuild.buildroot.net/results/63d01d33ae30f86b63b9f42a9fea116f2f3e9005/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 04ea3d38dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A Buffer Overflow vulnerability exists in zlog 1.2.15 via
zlog_conf_build_with_file in src/zlog/src/conf.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6eefe2f8f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with BR2_OPTIMIZE_0 raised since the
addition of the package in commit
efc10eb6b8 and
https://git.netfilter.org/arptables/commit/?id=369afc14de1d89ff5627ff4c5f72f6f839244b50:
libarptc/libarptc.c:48:21: error: redefinition of 'arpt_get_target'
48 | #define GET_TARGET arpt_get_target
| ^~~~~~~~~~~~~~~
libarptc/libarptc_incl.c:16:1: note: in expansion of macro 'GET_TARGET'
16 | GET_TARGET(STRUCT_ENTRY *e)
| ^~~~~~~~~~
In file included from .//include/libarptc/libarptc.h:7,
from libarptc/libarptc.c:26:
.//include/linux/netfilter_arp/arp_tables.h:196:43: note: previous definition of 'arpt_get_target' was here
196 | static __inline__ struct xt_entry_target *arpt_get_target(struct arpt_entry *e)
| ^~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/730dce4101e7afcee233067e2870603cd64b8a48
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3c5ca1fd7e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with BR2_OPTIMIZE_0:
/home/autobuild/autobuild/instance-11/output-1/host/lib/gcc/mips64-buildroot-linux-uclibc/10.3.0/../../../../mips64-buildroot-linux-uclibc/bin/ld: vde_l3.o: in function `ip_output_ready':
vde_l3.c:(.text+0xb30): undefined reference to `iphead'
Fixes:
- http://autobuild.buildroot.org/results/5eeefcdac0b8974a424a885fdc2e82f7cb4b617d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 68ef4e546d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add BR2_PACKAGE_OPENCV4_LIB_DNN to fix the following uclibc build
failure raised since bump to version 4.5.5 in commit
b692231393 and
1feb3838b5:
/home/giuliobenetti/autobuild/run/instance-3/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp: In member function 'float cv::dnn::RoundFunctor::calculate(float) const':
/home/giuliobenetti/autobuild/run/instance-3/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1260:43: error: 'fegetround' is not a member of 'std'
1260 | int old_rounding_direction = std::fegetround();
| ^~~~~~~~~~
/home/peko/autobuild/instance-0/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1261:14: error: 'fesetround' is not a member of 'std'
1261 | std::fesetround(FE_TONEAREST);
| ^~~~~~~~~~
/home/peko/autobuild/instance-0/output-1/build/opencv4-4.5.5/modules/dnn/src/layers/elementwise_layers.cpp:1261:25: error: 'FE_TONEAREST' was not declared in this scope
1261 | std::fesetround(FE_TONEAREST);
| ^~~~~~~~~~~~
Indeed, uclibc pretends to implement fenv but it raises build failures
on numerous architectures (or1k, sh4, xtensa, mipsel, arm, arc, riscv64,
etc.)
Fixes:
- http://autobuild.buildroot.org/results/a6dd3c10acfbf6bc1af867d770cf0ce926c6ce84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit cc10bd5777)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add dynamic library dependency to BR2_PACKAGE_WOLFSSL_ALL to fix the
following static build failure with ibrdtnd, a "wolfssl all"-enabled
libcurl and openssl:
/nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/opt/ext-toolchain/bin/../lib/gcc/sh4aeb-buildroot-linux-musl/11.2.0/../../../../sh4aeb-buildroot-linux-musl/bin/ld: /nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/bin/../sh4aeb-buildroot-linux-musl/sysroot/usr/lib/libssl.a(ssl_ciph.o): in function `SSL_COMP_get_compression_methods':
ssl_ciph.c:(.text+0x25ac): multiple definition of `SSL_COMP_get_compression_methods'; /nvmedata/autobuild/instance-5/output-1/per-package/ibrdtnd/host/sh4aeb-buildroot-linux-musl/sysroot/usr/lib/libwolfssl.a(libwolfssl_la-ssl.o):ssl.c:(.text+0x1ca60): first defined here
Fixes:
- http://autobuild.buildroot.org/results/be1d327ed4c91a6280a88906a399dfe146f0b64e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7d211f6701)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- 7zip reader: fix PPMD read beyond boundary (#1671)
- ZIP reader: fix possible out of bounds read (OSS-Fuzz 38766 #1672)
- ISO reader: fix possible heap buffer overflow in read_children() (OSS-Fuzz 38764, #1685)
- RARv4 redaer: fix multiple issues in RARv4 filter code (introduced in libarchive 3.6.0)
- fix heap use after free in archive_read_format_rar_read_data() (OSS-Fuzz 44547, 52efa50)
- fix null dereference in read_data_compressed() (OSS-Fuzz 44843, 1271f77)
- fix heap user after free in run_filters() (OSS-Fuzz 46279, #1715)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a33130d964)
[Peter: adjust commit message to make it clear that this is a security bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop host-pkgconf dependency which has been wrongly added by commit
732d94d25f. Indeed, expat doesn't use
pkgconf to retrieve dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5bc935665b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable examples and tests (enabled by default) through
--without-{examples,tests} which are available since version 2.2.7 and
1fdfd8a1b4
Also disable xmlwf (a binary that determines if an XML document is
well-formed) through --without-xmlwf which is available since version
2.2.4 and
9d950527a0
This will fix the following build failure on riscv64:
ERROR: reloc type R_RISCV_SET6 unsupported in this context
Fixes:
- http://autobuild.buildroot.org/results/99890c9c7ebe3266dd533c81352a3cbcf4d3d738
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit dac5873314)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure on musl:
In file included from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/asm/ioctl.h:12,
from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/linux/ioctl.h:5,
from /nvmedata/autobuild/instance-17/output-1/host/powerpc64-buildroot-linux-musl/sysroot/usr/include/linux/fs.h:14,
from ioctls/vfs.c:3:
ioctls/vfs.c:109:35: error: 'loff_t' undeclared here (not in a function); did you mean 'off_t'?
109 | { .name = "FIOQSIZE", .request = FIOQSIZE, },
| ^~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/b7f46072751a8d70fa02f1c625c5279f70bec853
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a8614ffc07)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl:
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the following cache variables appropriately:
LIBRESSL_RESULT (advanced)
LIBRESSL_RESULT__TRYRUN_OUTPUT (advanced)
For details see /nvmedata/autobuild/instance-27/output-1/build/mariadb-10.3.34/TryRunResults.cmake
Fixes:
- http://autobuild.buildroot.org/results/cbdbfcdae4b89ac678e1bf6bcded96872c7223ab
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1748086519)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl:
/nvmedata/autobuild/instance-9/output-1/host/lib/gcc/s390x-buildroot-linux-gnu/10.3.0/../../../../s390x-buildroot-linux-gnu/bin/ld: check/libcheck.a(check_ssl.o): in function `ssl_connect':
check_ssl.c:(.text+0x7da): undefined reference to `SSL_set0_wbio'
Fixes:
- http://autobuild.buildroot.org/results/76f72a3c7350ea265e2277c89d68e5256410e94c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 90bdef4f17)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 1.2 in
commit 242227dd86:
powerpc-buildroot-linux-gnu-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I/usr/include'
In file included from src/aircrack-ng/aircrack-ng.c:54:
/usr/include/math.h:476:21: error: '_Float128' is not supported on this target
476 | # define _Mdouble_ _Float128
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/83a114ce197fb6af53a26ed68184cf3bbb30c8a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a8e9b796c9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like was done in 700674b45c (package/bind: disable backtrace support)
for the up-to-date, official, upstream bind, also disable backtrace on
dhcp's internal bind to avoid the following build failure since commit
0c8dd6ebd6 (package/dhcp: use internal bind):
/nvmedata/autobuild/instance-15/output-1/host/lib/gcc/armeb-buildroot-linux-uclibcgnueabi/10.3.0/../../../../armeb-buildroot-linux-uclibcgnueabi/bin/ld: /nvmedata/autobuild/instance-15/output-1/build/dhcp-4.4.3/bind/bind-9.11.36/lib/isc/.libs/libisc.so: undefined reference to `_Unwind_GetIP'
Fixes:
- http://autobuild.buildroot.org/results/074786f3f1e7ffc858dcb1de1855ee138793869e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 53efc185bb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
systemd-udevd needs this group:
/usr/lib/udev/rules.d/50-udev-default.rules:43 Unknown group 'sgx', ignoring
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
[yann.morin.1998@free.fr: udev users/groups go to udev virtual package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 798a4983ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace first patch (which is not in master after nearly 4 years) with
a new set of pending patches to fix the following build failure with
gcc >= 7:
liboping.c: In function 'ping_set_ttl':
liboping.c:207:9: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 242 [-Werror=format-truncation=]
207 | "%s: %s", function, message);
| ^~
......
829 | sstrerror (ret, errbuf, sizeof (errbuf)));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
liboping.c:206:2: note: 'snprintf' output between 15 and 270 bytes into a destination of size 256
206 | snprintf (obj->errmsg, sizeof (obj->errmsg),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
207 | "%s: %s", function, message);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/31083354e9064b2deef86917d67e92a88af0fa46
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1b47bd987f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bpftool needs __sync_*_4 intrisics since its addition in commit
3675131e6c and
b0c3d7133f:
/nvmedata/autobuild/instance-26/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: /nvmedata/autobuild/instance-26/output-1/build/bpftool-v6.7.0/src/libbpf/libbpf.a(libbpf.o): in function `bpf_program__attach_kprobe_opts':
libbpf.c:(.text+0xff88): undefined reference to `__sync_fetch_and_add_4'
Fixes:
- http://autobuild.buildroot.org/results/919b8351d3783ca30a860df87ae814d5c4b9fd41
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 30cbb1e217)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl >= 2.8.0 raised since
703abab321:
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c: In function 'add_certificate_to_store':
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c:961:24: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
961 | bio_method = BIO_s_mem();
| ^
cc1: all warnings being treated as errors
Fixes:
- http://autobuild.buildroot.org/results/873f86fb2311ed29a791140f2341943475985fcc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c2f829a71a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libkrb5 does not build with libressl since commit
b7a5b9d06d and upstream is not interested
in fixing this issue as a PR is opened for more than 4 years
(https://github.com/krb5/krb5/pull/607):
pkinit_crypto_openssl.c: In function 'cms_signeddata_verify':
pkinit_crypto_openssl.c:1700:22: error: implicit declaration of function 'OBJ_get0_data'; did you mean 'BIO_get_data'? [-Werror=implicit-function-declaration]
1700 | print_buffer(OBJ_get0_data(etype), OBJ_length(etype));
| ^~~~~~~~~~~~~
| BIO_get_data
Fixes:
- http://autobuild.buildroot.org/results/e623f4e1d6b6004e98815b8b7da3938238890bd8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e77c6e9291)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-1271: arbitrary-file-write vulnerability
zgrep applied to a crafted file name with two or more newlines
can no longer overwrite an arbitrary, attacker-selected file.
[bug introduced in gzip-1.3.10]
https://www.openwall.com/lists/oss-security/2022/04/07/8
Other changes:
** Changes in behavior
'gzip -l' no longer misreports file lengths 4 GiB and larger.
Previously, 'gzip -l' output the 32-bit value stored in the gzip
header even though that is the uncompressed length modulo 2**32.
Now, 'gzip -l' calculates the uncompressed length by decompressing
the data and counting the resulting bytes. Although this can take
much more time, nowadays the correctness pros seem to outweigh the
performance cons.
'zless' is no longer installed on platforms lacking 'less'.
** Bug fixes
zgrep now names input file on error instead of mislabeling it as
"(standard input)", if grep supports the GNU -H and --label options.
'zdiff -C 5' no longer misbehaves by treating '5' as a file name.
[bug present since the beginning]
Configure-time options like --program-prefix now work.
Release Announcement:
https://lists.gnu.org/r/bug-gzip/2022-04/msg00011.html
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4bfe7edc4b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update out-of-tree driver to make it work with Linux kernel v5.17
(and older kernels not compatible with previous driver version,
like v5.15 etc).
Signed-off-by: Jan Havran <havran.jan@email.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c952070371)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pure-ftpd doesn't build with libressl 3.4.3 which doesn't include
f5674b4e23
resulting in the following build failure:
tls.c: In function 'tls_init_options':
tls.c:329:5: warning: implicit declaration of function 'SSL_CTX_set_num_tickets'; did you mean 'SSL_CTX_set_options'? [-Wimplicit-function-declaration]
SSL_CTX_set_num_tickets(tls_ctx, 0);
^~~~~~~~~~~~~~~~~~~~~~~
SSL_CTX_set_options
Fixes:
- http://autobuild.buildroot.org/results/f5d36180949278510199aa499e253780558c6ffe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e87e6fd085)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By returning a failure in the event that the initial seed doesn't exist,
we'd then skip creating a new seed, which means we'd never in fact have
an initial seed, and this script is therefore useless. Fix this by
checking for the existence of the seed file first, and just returning 0
if it's not there.
Reported-by: Nicolas Cavallari <Nicolas.Cavallari@green-communications.fr>
Reported-by: Eugen Hristev <Eugen.Hristev@microchip.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e65e9acb20)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-28346: Potential SQL injection in QuerySet.annotate(), aggregate(), and extra()
QuerySet.annotate(), aggregate(), and extra() methods were subject to SQL
injection in column aliases, using a suitably crafted dictionary, with
dictionary expansion, as the **kwargs passed to these methods.
CVE-2022-28347: Potential SQL injection via QuerySet.explain(**options) on PostgreSQL
QuerySet.explain() method was subject to SQL injection in option names,
using a suitably crafted dictionary, with dictionary expansion, as the
**options argument.
For more details, see the advisory:
https://www.djangoproject.com/weblog/2022/apr/11/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 87b8676fbf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
16.24.1:
CVE-2021-37706 / AST-2022-004: pjproject: integer underflow on STUN message
The header length on incoming STUN messages that contain an ERROR-CODE
attribute is not properly checked. This can result in an integer underflow.
Note, this requires ICE or WebRTC support to be in use with a malicious
remote party.
https://seclists.org/fulldisclosure/2022/Mar/0
CVE-2022-23608 / AST-2022-005: pjproject: undefined behavior after freeing a
dialog set
When acting as a UAC, and when placing an outgoing call to a target that then
forks Asterisk may experience undefined behavior (crashes, hangs, etc…)
after a dialog set is prematurely freed.
https://seclists.org/fulldisclosure/2022/Mar/1
CVE-2022-21723 / AST-2022-006: pjproject: unconstrained malformed multipart
SIP message
If an incoming SIP message contains a malformed multi-part body an out of
bounds read access may occur, which can result in undefined behavior. Note,
it’s currently uncertain if there is any externally exploitable vector
within Asterisk for this issue, but providing this as a security issue out
of caution.
https://seclists.org/fulldisclosure/2022/Mar/2
16.25.2:
CVE-2022-26498 / AST-2022-001: res_stir_shaken: resource exhaustion with
large files
When using STIR/SHAKEN, it’s possible to download files that are not
certificates. These files could be much larger than what you would expect to
download.
https://seclists.org/fulldisclosure/2022/Apr/17
CVE-2022-26499 / AST-2022-002: res_stir_shaken: SSRF vulnerability with
Identity header
When using STIR/SHAKEN, it’s possible to send arbitrary requests like GET to
interfaces such as localhost using the Identity header.
https://seclists.org/fulldisclosure/2022/Apr/18
CVE-2022-26651 / AST-2022-003: func_odbc: Possible SQL Injection
Some databases can use backslashes to escape certain characters, such as
backticks. If input is provided to func_odbc which includes backslashes it
is possible for func_odbc to construct a broken SQL query and the SQL query
to fail.
https://seclists.org/fulldisclosure/2022/Apr/19
Update hash of sha1.c after a doxygen comment update:
37c29b6a28
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 607162a09c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2022-1328: mutt_decode_uuencoded() can read past the of the input line
Buffer Overflow in uudecoder in Mutt affecting all versions starting from
0.94.13 before 2.2.3 allows read past end of input line
For details, see the release notes:
https://marc.info/?l=mutt-users&m=164979464612885&w=2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9b9707d15e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SPI unconditionally uses GPIOHANDLE_SET_LINE_VALUES_IOCTL which is only
available since kernel 4.8 and
d7c51b47ac
resulting in the following build failure since switch to upstream in
commit 03fa36df7e:
linuxspi.c: In function 'linuxspi_reset_mcu':
linuxspi.c:102:28: error: storage size of 'data' isn't known
struct gpiohandle_data data;
^~~~
linuxspi.c:110:32: error: 'GPIOHANDLE_SET_LINE_VALUES_IOCTL' undeclared (first use in this function)
ret = ioctl(fd_linehandle, GPIOHANDLE_SET_LINE_VALUES_IOCTL, &data);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/769021040e5e9293584734e4f461baeaa6dd91cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 114487dfd2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Update site to get latest version
- Switch to generic-package and drop patches as upstream doesn't provide
autotools support
- License is MIT since version 1.12.15
- This bump will fix the following build failure with BR2_OPTIMIZE_FAST:
src/sqlite3.c: In function 'sqlite3IsNaN':
src/sqlite3.c:21797:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.
21797 | # error SQLite will not work correctly with the -ffast-math option of GCC.
| ^~~~~
- This bump will also fix security issues by bumping sqlite to 3.36.0
- Update indentation in hash file (two spaces)
http://sqlitewrapper.kompex-online.com/index.php?content=changelog
Fixes:
- http://autobuild.buildroot.org/results/63e07345b97faa6d6239933f1790c6f2e02da77f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e2df7d28c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Internal bind libraries are not installed to target since commit
0c8dd6ebd6 resulting in the following
runtime failure:
Starting DHCP server: /usr/sbin/dhcpd: error while loading shared libraries: libirs.so.161: cannot open shared object file: No such file or directory
RANLIB must also be set to avoid the following build failure at install
step:
libtool: install: arceb-buildroot-linux-uclibc-ranlib /home/fabrice/buildroot/output/per-package/dhcp/target/usr/lib/libisccfg.a
/home/fabrice/buildroot/output/build/dhcp-4.4.3/bind/bind-9.11.36/libtool: line 1719: arceb-buildroot-linux-uclibc-ranlib: command not found
Fixes:
- No autobuilder failures (reported by Eugen.Hristev@microchip.com)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2087051d37)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-28544: SVN authz protected copyfrom paths regression
Subversion servers reveal 'copyfrom' paths that should be hidden according
to configured path-based authorization (authz) rules. When a node has
been copied from a protected location, users with access to the copy can
see the `copyfrom' path of the original. This also reveals the fact that
the node was copied. Only the 'copyfrom' path is revealed; not its
contents. Both httpd and svnserve servers are vulnerable.
https://subversion.apache.org/security/CVE-2021-28544-advisory.txt
- CVE-2022-24070: Subversion's mod_dav_svn is vulnerable to memory corruption
While looking up path-based authorization rules, mod_dav_svn servers may
attempt to use memory which has already been freed.
https://subversion.apache.org/security/CVE-2022-24070-advisory.txt
Drop no longer needed patch and autoreconf, as this is now fixed upstream:
https://svn.apache.org/viewvc?view=revision&revision=1881534
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 89e51bc625)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2022-24765:
On multi-user machines, Git users might find themselves unexpectedly in
a Git worktree, e.g. when there is a scratch space (`/scratch/`) intended
for all users and another user created a repository in `/scratch/.git`.
Merely having a Git-aware prompt that runs `git status` (or `git diff`)
and navigating to a directory which is supposedly not a Git worktree, or
opening such a directory in an editor or IDE such as VS Code or Atom, will
potentially run commands defined by that other user via
`/scratch/.git/config`.
https://www.openwall.com/lists/oss-security/2022/04/12/7
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 832107c6dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.17.9 (released 2022-04-12) includes security fixes to the
crypto/elliptic and encoding/pem packages, as well as bug fixes to the
linker and runtime.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2b2d97780d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Override CPPFLAGS to fix the following build failure with BR2_OPTIMIZE_0
raised since bump to version 0.14.0 in commit
cd707a9112 and
0e7b2b0300:
/home/autobuild/autobuild/instance-15/output-1/host/i686-buildroot-linux-gnu/sysroot/usr/include/features.h:412:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
configure adds -D_FORTIFY_SOURCE to CPPFLAGS if it is not already
defined. However, we don't want _FORTIFY_SOURCE to be enabled unless
it's enabled by Buildroot (for exactly the above reason). Therefore,
override CPPFLAGS in th build step to remove _FORTIFY_SOURCE again.
It should be noted that upstream already rejected a PR to remove
-Werror: https://github.com/smuellerDD/libkcapi/pull/132
Fixes:
- http://autobuild.buildroot.org/results/35141ea3046f5a4593e0b27ef92e4ace6bc0be66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 83aeec71fd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
(https://github.com/redis/redis/blob/6.2.7/00-RELEASENOTES)
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2022-24736) An attacker attempting to load a specially crafted Lua script
can cause NULL pointer dereference which will result with a crash of the
redis-server process. This issue affects all versions of Redis.
[reported by Aviv Yahav].
* (CVE-2022-24735) By exploiting weaknesses in the Lua script execution
environment, an attacker with access to Redis can inject Lua code that will
execute with the (potentially higher) privileges of another Redis user.
[reported by Aviv Yahav].
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
cc1: error: ‘-fcf-protection’ is not compatible with this target
The new Ubuntu GCC packages (e.g. Ubuntu 11.2.0-7ubuntu2, 11.2.0) turn
on ‘-fcf-protection’ globally, which causes a build failure in the x86
realmode code. Turn it off explicitly on compilers that understand this
option.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 213629f2d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since switch to meson-package in
commit 1db1322639 and
957a015157:
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-14/output-1/host/bin/or1k-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-14/output-1/host/bin/or1k-buildroot-linux-musl-g++'"
Fixes:
- http://autobuild.buildroot.org/results/1d52c8100414aa384572b23006a13f9b806d2d5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 2a92509f50)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wireplumber currently as "dbus" in its DEPENDENCIES, but it does
not select/depend on it at the Kconfig level. A simple configuration
such as:
BR2_PACKAGE_LUA=y
BR2_PACKAGE_PIPEWIRE=y
BR2_PACKAGE_WIREPLUMBER=y
Therefore fails to build with:
Makefile:576: *** dbus is in the dependency chain of wireplumber that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Since dbus is actually an optional dependency of wireplumber, this
commit fixes the issue by really handling it as an optional
dependency.
Fixes: c9a3c10417 ("package/wireplumber: new package")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2699eb5631)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building gen tool of the internal (bundled) bind needs to be for host, not target
Switch to use internal build in commit 0c8dd6ebd6
overlooked this.
Building dns library in /home/autobuild/autobuild/instance-13/output-1/build/dhcp-4.4.2-P1/bind/bind-9.11.14/lib/dns
/bin/sh: line 1: ./gen: cannot execute binary file: Exec format error
Thus, we need to set not just CC, but also CFLAGS etc. otherwise the
target CFLAGS etc. will be inherited from top-level configure.
Fixes:
- http://autobuild.buildroot.org/results/da6fd904d1a6bae73b6ff89dd008de1f459bb7d7/
Signed-off-by: Tim Hammer <Tim.Hammer@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7c814fe9b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without NPTL raised since bump to
version 14.1 in commit c9bd029115 and
44bf3d5083:
In file included from pthread_barrier_wait.c:16:
../../src/include/port/pg_pthread.h:31:3: error: conflicting types for 'pthread_barrier_t'
31 | } pthread_barrier_t;
| ^~~~~~~~~~~~~~~~~
In file included from /home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/bits/uClibc_stdio.h:114,
from /home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/stdio.h:71,
from ../../src/include/c.h:59,
from pthread_barrier_wait.c:14:
/home/autobuild/autobuild/instance-11/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/include/bits/pthreadtypes.h:135:3: note: previous declaration of 'pthread_barrier_t' was here
135 | } pthread_barrier_t;
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/70acbe121236ef0905c4466d4f7a0839723d2c49
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 6bc3461735)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Something happened to the tarball logic on github, changing the hash of the 1.5.11 release:
6a289406c1c0583763e5a9754e31a1eced55cd5f162a7bc2a3a315d5eb05c7a1 old/containerd-1.5.11.tar.gz
02b79d5e2b07b5e64cd28f1fe84395ee11eef95fc49fd923a9ab93022b148be6 new/containerd-1.5.11.tar.gz
-rw-r--r-- 1 peko peko 7494478 Apr 11 20:53 old/containerd-1.5.11.tar.gz
-rw-r--r-- 1 peko peko 7494477 Apr 5 20:39 new/containerd-1.5.11.tar.gz
Extracting and comparing them gives:
--- a/containerd-1.5.11/vendor/k8s.io/client-go/pkg/version/base.go 2022-03-24 01:09:42.000000000 +0100
+++ b/containerd-1.5.11/vendor/k8s.io/client-go/pkg/version/base.go 2022-03-24 01:09:42.000000000 +0100
@@ -55,7 +55,7 @@ var (
// NOTE: The $Format strings are replaced during 'git archive' thanks to the
// companion .gitattributes file containing 'export-subst' in this same
// directory. See also https://git-scm.com/docs/gitattributes
- gitVersion string = "v0.0.0-master+3df54a85234"
+ gitVersion string = "v0.0.0-master+3df54a8523"
gitCommit string = "3df54a852345ae127d1fa3092b95168e4a88e2f8" // sha1 from git, output of $(git rev-parse HEAD)
gitTreeState string = "" // state of git tree, either "clean" or "dirty"
The file in the repo uses $Format:%H$ and set the export-subst git attribute:
gitVersion string = "v0.0.0-master+$Format:%H$"
gitCommit string = "$Format:%H$" // sha1 from git, output of $(git rev-parse HEAD)
https://github.com/containerd/containerd/blob/main/vendor/k8s.io/client-go/pkg/version/base.go
So presumably it is related to that. In any case, update the hash to match
what Github is now serving to fix the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- The rules for acceptance of records into the cache have been tightened to
prevent the possibility of poisoning if forwarders send records outside
the configured bailiwick. (CVE-2021-25220)
- TCP connections with keep-response-order enabled could leave the TCP
sockets in the CLOSE_WAIT state when the client did not properly shut down
the connection. (CVE-2022-0396)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1fe5029122)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with BR2_SHARED_STATIC_LIBS:
CMake Error at src/CMakeLists.txt:56 (add_library):
add_library cannot create target "belr" because another target with the
same name already exists. The existing target is a static library created
in source directory
Fixes:
- http://autobuild.buildroot.org/results/d1ef96c8f370b5a522985c37f1681dd10bbc15bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: simplify/add comment explaining why]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c9bee083e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl > 2.7.0:
/nvmedata/autobuild/instance-21/output-1/host/opt/ext-toolchain/bin/../lib/gcc/microblaze-buildroot-linux-musl/11.2.0/../../../../microblaze-buildroot-linux-musl/bin/ld: /nvmedata/autobuild/instance-21/output-1/host/microblaze-buildroot-linux-musl/sysroot/usr/lib/libcrypto.a(x509_lu.c.o): in function `X509_OBJECT_get0_X509_CRL':
(.text+0xc3c): multiple definition of `X509_OBJECT_get0_X509_CRL'; /nvmedata/autobuild/instance-21/output-1/build/lftp-4.9.2/src/.libs/liblftp-network.a(liblftp_network_la-lftp_ssl.o):(.text+0x894): first defined here
Fixes:
- http://autobuild.buildroot.org/results/7fd1dfd5bc750ae5a3278ca950c838ae90704b23
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e8394943e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-1154: Use after free in utf_ptr2char in GitHub repository
vim/vim prior to 8.2.4646.
Fix CVE-2022-1160: heap buffer overflow in get_one_sourceline in GitHub
repository vim/vim prior to 8.2.4647.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c96d6925f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gst1-plugins-bad needs C++ since switch to meson-package in commit
5d6c408e95:
The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-8/output-1/host/bin/microblaze-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-8/output-1/host/bin/microblaze-buildroot-linux-musl-g++'"
Rewriting the meson.build so it only requires C++ for the modules that
are actually written in C++ is quite complicated, so just let the whole
package depend on C++. Hopefully however this is going to be fixed in
some future release. Therefore, the dependencies for individual modules
are kept as well (even though they're redundant now).
Fixes:
- http://autobuild.buildroot.org/results/8f924cebeb8a1ed73e57103bf3073fb8f8d8752e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 129922140e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without C++ raised since bump to version
1.18.0 in commit 15dc48ca9b:
The following exception(s) were encountered:
Running "/nvmedata/autobuild/instance-9/output-1/host/bin/or1k-buildroot-linux-musl-g++ --version" gave "[Errno 2] No such file or directory: '/nvmedata/autobuild/instance-9/output-1/host/bin/or1k-buildroot-linux-musl-g++'"
Fixes:
- http://autobuild.buildroot.org/results/8ac0ba5eaaf7571857b4d8cfabf1488d640dc59a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 80a9e9057d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the qemu_xtensa_lx60_nommu_defconfig to use the
busybox-minimal.config.
After commit 3de486f8b0 ("package/busybox: fix udhcpc options in minimal
config"), this has the benefit of fixing the following network
initialization failure:
udhcpc: invalid option -- b
With the full busybox config, the -b option would still be passed and
udhcpc would fail to start for the reason above.
Note that on NOMMU, udhcpc backgrounds unconditionally (unless the -f
option is given), so it still behaves properly. The -b option in fact
only backgrounds after the lease is obtained; on NOMMU, backgrounding is
done before the lease is even requested. So the behaviour is more or
less the same, except that on MMU systems, networking can be considered
either up or not available after S20network, but on NOMMU there is no
such guarantee.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8f3cfe4196)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/194/1941e194e1f5ad0bc4982ad39c3e34d266bc49c6/
opus requires that it is configured with --enable-float-approx when
-ffast-math (BR2_OPTIMIZE_FAST) is used, otherwise it errors out at build
time:
celt/arch.h:198:2: error: #error Cannot build libopus with -ffast-math
unless FLOAT_APPROX is defined. This could result in crashes on extreme
(e.g. NaN) input
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 43e859d47a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl raised since the addition
of the package in commit 3621918d1b:
/home/autobuild/autobuild/instance-10/output-1/build/ace-7.0.6/ace/SSL/SSL_Asynch_BIO.cpp:174:7: error: 'BIO_get_init' was not declared in this scope; did you mean 'BIO_set_init'?
174 | if (BIO_get_init(pBIO) == 0 || p_stream == 0 || buf == 0 || len <= 0)
| ^~~~~~~~~~~~
| BIO_set_init
Fixes:
- http://autobuild.buildroot.org/results/386afa88ac9e5e3bb65dddeabf610bb1e9bc4285
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7da45d9b63)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glib-networking raises the following build failure with libressl:
../tls/openssl/gtlsconnection-openssl.c: In function 'g_tls_connection_openssl_handshake_thread_request_rehandshake':
../tls/openssl/gtlsconnection-openssl.c:419:27: error: 'TLS1_3_VERSION' undeclared (first use in this function); did you mean 'TLS1_2_VERSION'?
419 | if (SSL_version(ssl) >= TLS1_3_VERSION)
| ^~~~~~~~~~~~~~
| TLS1_2_VERSION
../tls/openssl/gtlsconnection-openssl.c:419:27: note: each undeclared identifier is reported only once for each function it appears in
../tls/openssl/gtlsconnection-openssl.c:420:11: error: implicit declaration of function 'SSL_key_update' [-Werror=implicit-function-declaration]
420 | ret = SSL_key_update (ssl, SSL_KEY_UPDATE_REQUESTED);
| ^~~~~~~~~~~~~~
Since libressl doesn't (intend to) support post-1.0.2 openssl
compatibility, this is only going to get worse. Therefore, require
libopenssl.
Fixes:
- http://autobuild.buildroot.org/results/b8dea5704903c84858c7a339a73ecb713ac2791c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e02514ad7a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit 47acda3a95:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/sparc-buildroot-linux-uclibc/10.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: src/libpsl.so.5.3.2.p/psl.c.o: in function `psl_str_to_utf8lower':
psl.c:(.text+0x1584): undefined reference to `libiconv_open'
Fixes:
- http://autobuild.buildroot.org/results/8f012331acd3edb96a69d374436884679add8860
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3239fb5b17)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable vsx to avoid the following build failure on ppc64 raised since
bump to version 1.3.3 in commit 89337e4f39
and
cdb030cd37:
In file included from lpc_intrin_vsx.c:46:
/home/autobuild/autobuild/instance-1/output-1/host/lib/gcc/powerpc64-buildroot-linux-gnu/9.4.0/include/altivec.h:34:2: error: #error Use the "-maltivec" flag to enable PowerPC AltiVec support
34 | #error Use the "-maltivec" flag to enable PowerPC AltiVec support
| ^~~~~
lpc_intrin_vsx.c: In function 'FLAC__lpc_compute_autocorrelation_intrin_power8_vsx_lag_16':
lpc_intrin_vsx.c:94:7: warning: implicit declaration of function 'vec_vsx_ld'; did you mean 'vec_vslh'? [-Wimplicit-function-declaration]
94 | d0 = vec_vsx_ld(0, base);
| ^~~~~~~~~~
| vec_vslh
Fixes:
- http://autobuild.buildroot.org/results/a97a0522c58964fa51815236bc39b378e10b5008
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5197ce5ff3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a dependency on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS to avoid
the following build failure when GO_GOARCH is empty (e.g. on mips32)
which leads to an empty --arch argument in the sloci-image call, raised
since the addition of the package in commmit
ccda2f4bdc:
printf ' rm -rf /home/autobuild/autobuild/instance-6/output-1/images/rootfs-oci\n /home/autobuild/autobuild/instance-6/output-1/host/bin/sloci-image --arch --entrypoint "sh" --author "Buildroot" --user "0" /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/target /home/autobuild/autobuild/instance-6/output-1/images/rootfs-oci:latest\n' >> /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
chmod a+x /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
PATH="/home/autobuild/autobuild/instance-6/output-1/host/bin:/home/autobuild/autobuild/instance-6/output-1/host/sbin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl" FAKEROOTDONTTRYCHOWN=1 /home/autobuild/autobuild/instance-6/output-1/host/bin/fakeroot -- /home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/fakeroot
rootdir=/home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/oci/target
table='/home/autobuild/autobuild/instance-6/output-1/build/buildroot-fs/full_devices_table.txt'
Usage:
sloci-image [options] ROOTFS NAME[:TAG]
sloci-image [-h | -V]
Create a single-layer OCI image with the given rootfs.
Arguments:
ROOTFS Directory or tar.gz archive with rootfs to pack into the image.
Important: Archive will be *moved* to the image, so make a copy if you
need it. Directory will be preserved.
NAME Name of the image.
TAG Tag for the image. Defaults to "latest".
Options:
-m --arch ARCH CPU architecture which the binaries in this image are built to run on.
Defaults to $(uname -m).
--arch-variant Variant of the CPU. This is typically used only for arm (v6, v7, v8).
-a --author NAME Name and/or email address of the person which created the image.
-c --cmd CMD Default arguments to the entrypoint of the container.
--debug Print debug messages (it can be also enabled with env. variable DEBUG).
-C --entrypoint EP Arguments to use as the command to execute when the container starts.
-e --env VAR=VAL Default environment variables for container.
-l --label KEY=VALUE Metadata for the container compliant with OCI annotation rules.
If KEY starts with a dot, it will be prefixed with
"org.opencontainers.image" (e.g. .url -> org.opencontainers.image.url).
--os OS Name of the OS which the image is built to run on. Defaults to "linux".
-p --port PORT[/PROT] Default set of ports to expose from a container running this image in
format: <port>/tcp, <port>/udp, or <port> (same as <port>/tcp).
Aliases: --expose.
-t --tar Pack image in a TAR archive.
-u --user USER The username or UID of user the process run as.
-v --volume PATH Default set of directories describing where the process is likely write
data specific to a container instance.
-w --working-dir DIR Sets the current working directory of the entrypoint process in the
container.
-V --version Print version and exit.
-h --help Print this message and exit.
Please report bugs at <https://github.com/jirutka/sloci-image/issues>.
make: *** [fs/oci/oci.mk:99: /home/autobuild/autobuild/instance-6/output-1/images/rootfs.oci] Error 1
Fixes:
- http://autobuild.buildroot.org/results/44da17a393421dfcb8bbdd63074cb82b436dfa94
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit efe832dbc3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ipmiutil depends on dynamic library since commit
670095b473 so test on BR2_STATIC_LIBS
added by commit 9f31cd14d0 is not needed
anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit cdc2a52a0f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udpcast unconditionally build manpages which will raise the following
build failure without pod2man since at least bump to version 20200328 in
commit 4fb91d8b9d:
sh: line 1: pod2man: command not found
To fix this issue, rework how udpcast is built and installed to always
build and install the sender or the receiver and never build the
manpages. As a side effect, this will also avoid to install the unneeded
rateGovernor.h
Fixes:
- http://autobuild.buildroot.org/results/ce602a09357e950d79794391cd4a852d565914f1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b49e3da1ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An out-of-bounds array read in the apr_time_exp*() functions was fixed
in the Apache Portable Runtime 1.6.3 release (CVE-2017-12613). The fix
for this issue was not carried forward to the APR 1.7.x branch, and
hence version 1.7.0 regressed compared to 1.6.3 and is vulnerable to the
same issue.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 10d80eb39a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with uclibc-ng and grpc raised on arm
and ppc:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libabsl_random_internal_randen_hwaes.so.2111.0.0: undefined reference to `getauxval'
Strangely enough it seems there is only one autobuilder failure despite
the fact that libabseil-cpp is unconditionally using getauxval since its
addition in commit 93568440ed:
https://github.com/abseil/abseil-cpp/blob/20200225/absl/random/internal/randen_detect.cc
Perhaps this build failure is an unexpected side effect of commit
8251d8c255
Fixes:
- http://autobuild.buildroot.org/results/775f3ca3dedebff29e212b29dfa896b7613b7a02
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1a3de362ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Handle WITH_POWER8 to fix the following build failure with powerpc and
libglib2 raised since bump to version 1.9.9-b1 in commit
1f7b12a0b4 and
b81f4ee96d:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/powerpc-buildroot-linux-musl/11.2.0/../../../../powerpc-buildroot-linux-musl/bin/ld: /home/autobuild/autobuild/instance-9/output-1/host/powerpc-buildroot-linux-musl/sysroot/usr/lib/libz.a(adler32_power8.c.o): in function `adler32_power8':
/home/autobuild/autobuild/instance-9/output-1/build/zlib-ng-2.0.6/arch/power/adler32_power8.c:106: undefined reference to `vec_sumsu'
Fixes:
- http://autobuild.buildroot.org/results/f864a0e2307e25342b45c90a5b4fb57a0f5c1c93
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 192dfc68c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable tests which are enabled by default in debug mode since bump to
version 2.0.0 in commit 2a3edc5e00 and
e84f12fc5e
as they will raise the following build failure if cmocka is built before
libyang:
In file included from /home/buildroot/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/stdint.h:20,
from /home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/lib/gcc/riscv64-buildroot-linux-musl/10.3.0/include/stdint.h:9,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/src/libyang.h:18,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/tests/utests/utests.h:30,
from /home/buildroot/autobuild/instance-0/output-1/build/libyang-2.0.112/tests/utests/extensions/test_yangdata.c:15:
/home/buildroot/autobuild/instance-0/output-1/host/riscv64-buildroot-linux-musl/sysroot/usr/include/bits/alltypes.h:53:24: error: conflicting types for 'uintptr_t'
53 | typedef unsigned _Addr uintptr_t;
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/7ae21fbb28b1a69183c5d8ed87cf5f5cbf055026
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ea6cc91be4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace the remaining git:// URLs with their https:// equivalents as
this is more secure and also more palatable to corporate firewalls.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[yann.morin.1998@free.fr: convert dahdi-linux too]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6626bf7c5f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-stats currently uses the services from support/scripts/cpedb.py to
match the CPE identifiers of packages with the official CPE database.
Unfortunately, the cpedb.py code uses regular ElementTree parsing,
which involves loading the full XML tree into memory. This causes the
pkg-stats process to consume a huge amount of memory:
thomas 1310458 85.2 21.4 3708952 3450164 pts/5 R+ 16:04 0:33 | | \_ python3 ./support/scripts/pkg-stats
So, 3.7 GB of VSZ and 3.4 GB of RSS are used by the pkg-stats
process. This is causing the OOM killer to kick-in on machines with
relatively low memory.
This commit reimplements the XML parsing needed to do the CPE matching
directly in pkg-stats, using the XmlParser functionality of
ElementTree, also called "streaming parsing". Thanks to this, we never
load the entire XML tree in RAM, but only stream it through the
parser, and construct a very simple list of all CPE identifiers. The
max memory consumption of pkg-stats is now:
thomas 1317511 74.2 0.9 381104 152224 pts/5 R+ 16:08 0:17 | | \_ python3 ./support/scripts/pkg-stats
So, 381 MB of VSZ and 152 MB of RSS, which is obviously much better.
The JSON output of pkg-stats for the full package set, before and after
this commit, is exactly identical.
Now, one will probably wonder why this isn't directly changed in
cpedb.py. The reason is simple: cpedb.py is also used by
support/scripts/missing-cpe, which (for now) heavily relies on having
in memory the ElementTree objects, to re-generate a snippet of XML
that allows us to submit to NIST new CPE entries.
So, future work could include one of those two options:
(1) Re-integrate cpedb.py into missing-cpe directly, and live with
two different ways of processing the CPE database.
(2) Rewrite the missing-cpe logic to also be compatible with a
streaming parsing, which would allow this logic to be again
shared between pkg-stats and missing-cpe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add missing import of requests
- import CPEDB_URL from cpedb, instead of duplicating it
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bd1798ad95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some upstream sites are very slow to respond, and the default timeout
of 300 seconds of the aiohttp.ClientSession() is too long. Let's
reduce it to 15 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 387c496b98)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libxkbcommon is disabled, QT_CONFIG(xkbcommon) is not defined which
means the variable and function pointer in this patch are compiled out
from the header, but the cpp code actually still made use of it. This
patch fixes the build issue when libxkbcommon package is not to be
built.
This patch was taken from (merged):
https://codereview.qt-project.org/c/qt/qtwayland/+/344916
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1da911cbde)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5wayland package currently has a bug if the xkbcommon Qt config is not
enabled which highlighted a race issues between qt5base, libxkbcommon
and qt5wayland.
qt5wayland has a dependency on libxkbcommon package if it's enabled.
qt5base only has a dependency on libxkbcommon if xcb support is to be
enabled.
If libxkbcommon package is built before qt5base, qt5base will detect it
during its configure step and enable the Qt config accordingly. This
will make it available to qt5wayland afterwards, even if xcb support is
not enabled in Buildroot Kconfig.
However, if qt5base is built before libxkbcommon is, qt5base will not
advertise support of xbcommon feature to qt5wayland (which will fail its
build because of a bug in the source code).
Since the package build order should not impact the outcome of the
build, let's explicit the dependency if and only if libxkbcommon package
is to be compiled at some point in time so that at least this feature is
not susceptible to races.
Move the xkbcommon entries out of the BR2_PACKAGE_QT5BASE_XCB condition,
instead make them depend on BR2_PACKAGE_LIBXKBCOMMON. Since
BR2_PACKAGE_QT5BASE_XCB selects BR2_PACKAGE_LIBXKBCOMMON they are still
included if xcb is selected.
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[Arnout: remove the already existing xkbcommon entries]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ba8f35eda6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: dbus/sigsegv.c.17.o: in function `signal_segv':
sigsegv.c:(.text+0x98): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/dca49cb9b3e66fac921601560e9358bcce9acffc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 930db465d9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The busybox-minimal.config, which is used by systems without an MMU, specifies
the "-b" command line option for udhcpc. However, this option is not supported
by BusyBox udhcpc anymore since version 1.27.0 when building for systems
without an MMU.
Remove the "-b" option from busybox-minimal.config to repair network
initialization on systems without an MMU.
This fixes the following network initialization failure:
udhcpc: invalid option -- b
FAIL
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3de486f8b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsndfile is only needed to build jackrec example client
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9a78a75613)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsamplerate is only needed to build the NetJack backend and internal
client
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 05bbdfa382)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without threads and openvpn raised since
commit 0199dc1617:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabihf/9.3.0/../../../../arm-buildroot-linux-uclibcgnueabihf/bin/ld: /home/giuliobenetti/autobuild/run/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/lib/libpkcs11-helper.so: undefined reference to `_pkcs11h_slotevent_init'
Fixes:
- http://autobuild.buildroot.org/results/fcaa70cc035d6f9d35dfa8d564e9948c7e1cfd9e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d76b7564f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.4.x is now EOL, so no more updates for that series.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 607c5986a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2021-38593 fixes originally missed a usecase that was covered by the
to-be-removed patch. However, this patch was incorrect and added some
issues on its own, which was then fixed by now-removed
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch.
Unfortunately for us, the to-be-removed patch (fixed by
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch) can actually
be applied (with fuzz; by `patch` only) on top of the now-removed patch.
When the move to KDE Qt fork was made, some patches were removed as they
were already part of the new git fork. However, the to-be-removed patch
was not. This means the
0012-Refix-for-avoiding-huge-number-of-tiny-dashes.patch was actually
undone when Buildroot patched qt5base.
Let's remove this patch to fix this oversight.
As a reference:
e7ea2ed27c Improve fix for avoiding huge number of tiny dashes
fixed by
65b3aa6a1c Refix for avoiding huge number of tiny dashes
in the git repo.
Fixes: 5770a645a3 "package/qt5: bump packages to latest kde submodule versions"
Cc: Quentin Schulz <foss+buildroot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
[Arnout: renumber patches 0007 and 0008]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3857bccca5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 0.40.2 in
commit 6acdbb81c8:
[108/298] Generating src/librygel-core/RygelCore-2.6.typelib with a custom command
FAILED: src/librygel-core/RygelCore-2.6.typelib
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/nios2-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler --output src/librygel-core/RygelCore-2.6.typelib /home/giuliobenetti/autobuild/run/instance-3/output-1/build/rygel-0.40.2/build/src/librygel-core/RygelCore-2.6.gir
Could not find GIR file 'GUPnP-1.2.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file /home/giuliobenetti/autobuild/run/instance-3/output-1/build/rygel-0.40.2/build/src/librygel-core/RygelCore-2.6.gir: Failed to parse included gir GUPnP-1.2
Fixes:
- http://autobuild.buildroot.org/results/2b8956818f03f66a53480f7ed5fc0abb4f05288d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 94515b902c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable the python-rpi-gpio package on 64-bit ARM architectures. I've tested
this with a Raspberry Pi 4 64-bit and Python 3 build and it works as expected.
Signed-off-by: Mirza Kapetanovic <mirza.kapetanovic@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 45f2609ca2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When generating a filesystem image on a power10 build machine running
Ubuntu, we see a segfault when fakeroot is running chmod.
This has been reported and fixed upstream in Debian in version 1.26-1.2:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=995393#53
Add the same patch to resolve the segfault.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Arnout: add patch signoff and give proper name (check-package)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a38c6827db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I'm involved in the upstream kvm-unit-tests and the mcf5208 QEMU
machine, so I could help to have a look on these files, too.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 3396e945df)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to autotools-package to avoid the following static build failure
since commit d661740201:
[ 56%] Linking C executable rtl_biast
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.3.0/../../../../riscv64-buildroot-linux-musl/bin/ld: attempted static link of dynamic object `/home/peko/autobuild/instance-1/output-1/host/riscv64-buildroot-linux-musl/sysroot/lib/libatomic.so'
collect2: error: ld returned 1 exit status
Drop both cmake-related patches
Fixes:
- http://autobuild.buildroot.org/results/cf84759682848db8ed5610e1abe5a92337d0e957
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 26a16ed9d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Writing into /dev/urandom doesn't actually credit any entropy bits. And
while it adds that data to the entropy pool, it won't actually be
immediately used when reading from /dev/urandom subsequently. This is
how the kernel's /dev/urandom has always worked, unfortunately.
As a result of this behavior, which may be understandably surprising,
writing a good seed file into /dev/urandom and then saving a new seed
file immediately after is dangerous, because the new seed file may wind
up being entirely deterministic, even if the old seed file was quite
good.
This has been fixed in systemd with
<da2862ef06>,
and fortunately it's possible to do the same thing in shell script here.
Specifically, instead of just saving new /dev/urandom output straight
up, we hash the new /dev/urandom together with the old seed, in order to
produce the new seed. This way the amount of entropy in the new seed
will stay the same or get better, but not appreciably regress.
At the same time, the pool size check in this script is useless. Writing
to /dev/urandom never credits bits anyway, so no matter what, writing
into /dev/urandom is useful and not harmful. There's also not much of a
point in seeding with more than 256 bits, which is what the hashing
operation above produces. So this commit removes the file size check.
As a final note, while this commit improves upon the status quo by
removing a vulnerability, this shell script still does not actually
initialize the RNG like it says it does. For initialization via a seed
file, the RNDADDENTROPY ioctl must be used but there's currently no way
to do that from a shell script for now.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f0986de551)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-21716: Twisted is an event-based framework for internet
applications, supporting Python 3.6+. Prior to 22.2.0, Twisted SSH
client and server implement is able to accept an infinite amount of data
for the peer's SSH version identifier. This ends up with a buffer using
all the available memory. The attach is a simple as `nc -rv localhost 22
< /dev/zero`. A patch is available in version 22.2.0. There are
currently no known workarounds.
https://github.com/twisted/twisted/releases/tag/twisted-22.2.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 92a3ca0932)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-26495: In nbd-server in nbd before 3.24, there is an
integer overflow with a resultant heap-based buffer overflow. A value of
0xffffffff in the name length field will cause a zero-sized buffer to be
allocated for the name, resulting in a write to a dangling pointer. This
issue exists for the NBD_OPT_INFO, NBD_OPT_GO, and NBD_OPT_EXPORT_NAME
messages.
Fix CVE-2022-26496: In nbd-server in nbd before 3.24, there is a
stack-based buffer overflow. An attacker can cause a buffer overflow in
the parsing of the name field by sending a crafted NBD_OPT_INFO or
NBD_OPT_GO message with an large value as the length of the name.
https://github.com/NetworkBlockDevice/nbd/compare/nbd-3.21...nbd-3.24
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit bf2e459bb9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openssl is mandatory since bump to version 9.16.26 in commit
8adeaec8af so move openssl variables in
the beginning of bind.mk instead of keeping them in the middle of the
file. Moreover, drop "BIND_DEPENDENCIES += host-pkgconf zlib" as
host-pkgconf is already mandatory
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4b127b0c1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-odb installs the ODB compiler, which when executed at runtime,
needs access to the libodb headers. This is a runtime dependency,
normally added in Config.in, but for host packages there is no way to
express a runtime dependency. In order to have them installed, add a
dependency on host-libodb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Kamel: Add optional host-libodb-boost dependency]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 88471fe4fd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add host variant of libodb-boost required by the ODB compiler.
The libodb-boost headers are needed at compile time, and
therefore installed in $(HOST_DIR).
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Arnout: add -std=c++11]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e2f1f28efd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for a new type of graph, showing the timeline
of a build. It shows, with one line per package, when each of this
package steps started/ended, and therefore allows to see the
sequencing of the package builds.
For a fully serialized build like we have today, this is not super
useful (except to show that everything is serialized), but it becomes
much more useful in the context of top-level parallel build.
We chose to order the graph by the time-of-configure, as it is the
closest to the actual cascade-style of a true dependency graph, which is
tiny bit more complex to achieve properly. The actual result still looks
pretty good.
The graph-build make target is extended to also generate this new
timeline graph.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- sort by start-of-configure time
- re-use existing colorsets (default or alternate)
- fix python2isms
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5e8b01afd5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A malformed input file can lead to a segfault due to an out of bounds
array access in raptor_xml_writer_start_element_common.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2fca33462b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2022-24128: Timescale TimescaleDB 1.x and 2.x before 2.5.2 may
allow privilege escalation during extension installation. The
installation process uses commands such as CREATE x IF NOT EXIST that
allow an unprivileged user to precreate objects. These objects will be
used by the installer (which executes as Superuser), leading to
privilege escalation. In order to be able to take advantage of this, an
unprivileged user would need to be able to create objects in a database
and then get a Superuser to install TimescaleDB into their database. (In
the fixed versions, the installation aborts when it finds that an object
already exists.)
"This release contains bug fixes since the 2.5.1 release.
This release is high priority for upgrade. We strongly recommend that
you upgrade as soon as possible."
https://github.com/timescale/timescaledb/releases/tag/2.5.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3398e8e6d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems reasonable to expect that the download of the host and target
variants should usually be exactly the same and thus reuse the target
package values for the host package. This commits add support to
inherit host _DL_SUBDIR, _DOWNLOAD_DEPENDENCIES, _DL_ENV and
_DOwNLOAD_POST_PROCESS variables from target ones. These variables can
still be overriden if necessary for the host package.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit efa7712b09)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A DNS rebinding issue in ReadyMedia (formerly MiniDLNA) before 1.3.1
allows a remote web server to exfiltrate media files.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c7520b7ea1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An out of bounds read was found in Wavpack 5.4.0 in processing *.WAV
files. This issue triggered in function WavpackPackSamples of file
src/pack_utils.c, tainted variable cnt is too large, that makes pointer
sptr read beyond heap bound.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a9bff8a0b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This has been like tht for ages (probably an implicit dependency check
in older versions), but now wget has explicit flags, so let's use them.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b0fc0a811b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit cf0c9830c0.
This doesn't work with the gnupg v1/v2 handling here:
package/gcr/Config.in:1:error: recursive dependency detected!
package/gcr/Config.in:1: symbol BR2_PACKAGE_GCR depends on BR2_PACKAGE_GNUPG
package/gnupg/Config.in:1: symbol BR2_PACKAGE_GNUPG is selected by BR2_PACKAGE_GNUPG2
package/gnupg2/Config.in:5: symbol BR2_PACKAGE_GNUPG2 is selected by BR2_PACKAGE_GCR
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check_package_get_latest_version_by_distro() function analyzes the
data returned by release-monitoring.org. For two of our
packages (bento4 and qextserialport), release-monitoring.org returns
something that is a bit odd: it returns an entry with a
"stable_versions" field that contains an empty array. Our code was
ready to have or not have a "stable_versions" entry, but when it is
present, we assumed it was not an empty array. These two packages, for
some reason, break this assumption.
In order to solve this problem, this commit is more careful, and uses
the stable_versions field only if it exists and it has at least one
entry. The code is also reworked as a sequence of "if...elif...else"
to be more readable.
This fixes the following exception when running pkg-stats on the full
package set:
Task exception was never retrieved
future: <Task finished name='Task-10772' coro=<check_package_latest_version_get() done, defined at ./support/scripts/pkg-stats:532> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 535, in check_package_latest_version_get
if await check_package_get_latest_version_by_distro(session, pkg):
File "./support/scripts/pkg-stats", line 489, in check_package_get_latest_version_by_distro
version = data['stable_versions'][0] if 'stable_versions' in data else data['version'] if 'version' in data else None
IndexError: list index out of range
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: non-sequence tests as True]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c72f3f2b43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
alsa-lib is optional, not mandatory, since the addition of the package
in commit 18a8630637
Moreover, alsa support depends on BR2_PACKAGE_ALSA_LIB_SEQ (otherwise,
it is silently disabled)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2fc2191845)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of the package
in commit 18a8630637:
/home/giuliobenetti/autobuild/run/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-musl/10.3.0/../../../../riscv64-buildroot-linux-musl/bin/ld: libzynaddsubfx_core.a(Master.cpp.o): in function `.L1880':
Master.cpp:(.text+0x7cc0): undefined reference to `__atomic_exchange_1'
Fixes:
- http://autobuild.buildroot.org/results/91b5959ca0eb136c1609462e71d109ff09cca5e5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ba7319a06e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes between 1.1.1m and 1.1.1n [15 Mar 2022]
*) Fixed a bug in the BN_mod_sqrt() function that can cause it to loop forever
for non-prime moduli.
Internally this function is used when parsing certificates that contain
elliptic curve public keys in compressed form or explicit elliptic curve
parameters with a base point encoded in compressed form.
It is possible to trigger the infinite loop by crafting a certificate that
has invalid explicit curve parameters.
Since certificate parsing happens prior to verification of the certificate
signature, any process that parses an externally supplied certificate may
thus be subject to a denial of service attack. The infinite loop can also
be reached when parsing crafted private keys as they can contain explicit
elliptic curve parameters.
Thus vulnerable situations include:
- TLS clients consuming server certificates
- TLS servers consuming client certificates
- Hosting providers taking certificates or private keys from customers
- Certificate authorities parsing certification requests from subscribers
- Anything else which parses ASN.1 elliptic curve parameters
Also any other applications that use the BN_mod_sqrt() where the attacker
can control the parameter values are vulnerable to this DoS issue.
(CVE-2022-0778)
[Tomáš Mráz]
*) Add ciphersuites based on DHE_PSK (RFC 4279) and ECDHE_PSK (RFC 5489)
to the list of ciphersuites providing Perfect Forward Secrecy as
required by SECLEVEL >= 3.
[Dmitry Belyavskiy, Nicola Tuveri]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 66868e9fab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the list of full distribution, the FAQ contains a link to Emdebian.
This project stopped receiving updates in 2014 and the main web page does not exist anymore.
This replace the entry with a link to the Debian ports page.
Signed-off-by: Yannick Brosseau <yannick.brosseau@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit db2b8a1ce2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop -DHAVE_DNSSEC_STATIC which has been added by commit
e913527b94 but is not needed and raises
the following static build failure because dnsmasq will wrongly append
"-Wl,-Bstatic -lgmp -Wl,-Bdynamic":
/home/buildroot/autobuild/instance-2/output-1/host/bin/x86_64-linux-gcc -static -o dnsmasq cache.o rfc1035.o util.o option.o forward.o network.o dnsmasq.o dhcp.o lease.o rfc2131.o netlink.o dbus.o bpf.o helper.o tftp.o log.o conntrack.o dhcp6.o rfc3315.o dhcp-common.o outpacket.o radv.o slaac.o auth.o ipset.o pattern.o domain.o dnssec.o blockdata.o tables.o loop.o inotify.o poll.o rrfilter.o edns0.o arp.o crypto.o dump.o ubus.o metrics.o hash-questions.o domain-match.o -Wl,-Bstatic -L/home/buildroot/autobuild/instance-2/output-1/host/bin/../x86_64-buildroot-linux-musl/sysroot/usr/lib -lhogweed -lgmp -lnettle -Wl,-Bdynamic -Wl,-Bstatic -lgmp -Wl,-Bdynamic
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/10.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: attempted static link of dynamic object `/home/buildroot/autobuild/instance-2/output-1/host/x86_64-buildroot-linux-musl/sysroot/lib/../lib64/libc.so'
Strangely enough, this is the first time this build failure is raised by
the autobuilders whereas "-Wl,-Bdynamic" is set since a very long time:
https://thekelleys.org.uk/gitweb/?p=dnsmasq.git;a=commit;h=c979fa04a40ff12370c8d3a82ad27d9d3b5907e3
Fixes:
- http://autobuild.buildroot.org/results/99b419ddb5a3be561d39e715833510a59519213e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit b6a4453bd7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libfcgi raises the following build failure with glibc 2.34 and gcc
11.2.0:
In file included from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/features.h:488,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/bits/libc-header-start.h:33,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/stdio.h:27,
from /home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/fcgi_stdio.h:18,
from boinc_fcgi.h:19,
from coproc.cpp:22:
/home/peko/autobuild/instance-1/output-1/host/arm-buildroot-linux-gnueabihf/sysroot/usr/include/wchar.h:582:24: error: 'malloc' attribute argument 1 is ambiguous
582 | __attribute_malloc__ __attr_dealloc_fclose;
| ^~~~~~~~~~~~~~~~~~~~~
RawTherapee has the same kind of issue:
- https://github.com/Beep6581/RawTherapee/issues/6324
- https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101747
Fixes:
- http://autobuild.buildroot.org/results/232dae62570ed7927a10864d83dccaf9b6214500
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 54cb3b506d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since gcr selects gnupg2, it's incompatible with gnupg. Add this
dependency and corresponding comment.
While we're at it, also hide the existing comment when
!BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5783a418f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like aarch64, aarch64 BE supports the Image and Image.gz format.
Signed-off-by: Rémi Duraffort <remi.duraffort@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d1579589e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This adds two extra commands to install dbus policy config
to target if dbus option is enabled.
Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d749634006)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
netsnmp support needs mib to avoid the following build failure raised
since the addition of the package in commit
42382a1712:
checks_snmp.c: In function ‘zbx_snmp_get_octet_string’:
checks_snmp.c:694:35: error: invalid use of undefined type ‘struct tree’
694 | hint = (NULL != subtree ? subtree->hint : NULL);
| ^~
Fixes:
- No autobuilder failures (yet)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 77f9d2d6a6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: ../../build/lib/libvcos.so: undefined reference to `backtrace_symbols'
Fixes:
- http://autobuild.buildroot.org/results/93d3b8cc2ac5dfa9d4b44946c0b4d8171e8f52a1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit bc4cc27705)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without musl-root in config.toml the build stop with the following error:
thread 'main' panicked at 'couldn't find libc.a in musl libdir: output/host/arm-buildroot-linux-musleabihf/sysroot/lib/lib', src/bootstrap/sanity.rs:192:25
musl-root is needed to provide the path to libc.a and libunwind.a because
rust link them statically into the standard library and liblibc [1].
For other libc, musl-root is not used and ignored [2].
[1] cd980b3bee
[2] https://github.com/rust-lang/rust/blob/1.58.1/src/bootstrap/sanity.rs#L181
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a41b0f31de)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bpftool uses its own local copy of libbpf so add
BR2_PACKAGE_BPFTOOL_ARCH_SUPPORTS to avoid the following build failure
on ARM:
btf.c: In function 'btf_type_by_id':
btf.c:461:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (type_id < btf->start_id)
^
bpf.c:62:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^
Fixes:
- http://autobuild.buildroot.org/results/aae772f1cfb16516a57f310c4f022e80a2a8d65e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c750dd4e5d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The test TestRust is currently broken with ripgrep package with
the following error:
error[E0514]: found crate `core` compiled by an incompatible version of rustc
|
= help: please recompile that crate using this compiler (rustc 1.58.1) (consider running `cargo clean` first)
= note: the following crate versions were found:
crate `core` compiled by rustc 1.58.1 (db9d1b20b 2022-01-20): TestRust/host/lib/rustlib/x86_64-unknown-linux-gnu/lib/libcore-6cfcec236d576603.rlib
error[E0514]: found crate `std` compiled by an incompatible version of rustc
The problem is not really a cross-compilation issue (we are building
for an armv7 target on x86_64 host) but a problem with rust-std libraries
(rlib).
We can notice that "rustc 1.58.1 (db9d1b20b 2022-01-20)" is the same
version as the prebuilt rustc used to bootstrap the build:
TestRust/host/bin/rustc --version
rustc 1.58.1
TestRustBin/host/bin/rustc --version
rustc 1.58.1 (db9d1b20b 2022-01-20)
Indeed we are using host-rust-bin to bootstrap the host-rust compiler
package built by Buildroot. The problem is that the
libcore-6cfcec236d576603.rlib file come from host-rust-bin (rust-std)
and is not removed before installing host-rust built by Buildroot.
We actually spent a lot of time to build host-rust with rust-std
and forget to install this important library HOST_DIR.
Looking at the host-rust build directory we can notice two installer
script "install.sh" (the same scripts used to install host-rust-bin):
TestRust/build/host-rust-1.58.1/build/tmp/tarball/rust/x86_64-unknown-linux-gnu/rust-1.58.1-x86_64-unknown-linux-gnu/install.sh
TestRust/build/host-rust-1.58.1/build/tmp/tarball/rust-std/armv7-unknown-linux-gnueabihf/rust-std-1.58.1-armv7-unknown-linux-gnueabihf/install.sh
The "tarball" directory is generated by the "python x.py dist" during
the install step, we have to keep it.
Replace "python x.py install" by theses two install scripts.
Installing rust-std with the install.sh script replace the rust-std
libraries installed by host-rust-bin.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202544
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Arnout: remove redundant parenthesis; only use a variable for the
common install opts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1568249391)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TestRust and TestRustBin has been introduced at the time when there was
no cargo package infrastructure or any package using rust compiler
(Buildroot 2018.02).
Since then the ripgrep package has been introduced, initially using
the generic package infrastructure and converted later to the cargo
package infrastructure.
Due a recent change in rust/cargo removing the cargo config file [1]
the test TestRust and TestRustBin now fail to compile since they build
an hello-world crate outside of the cargo package infrastructure
without the correct environment for cross-compiling.
Replace the 'hello-world' crate by ripgrep package and check if it
can run properly in Qemu.
Fixes tests.package.test_rust.TestRustBin:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202545
But doesn't fixes tests.package.test_rust.TestRust due another bug:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2116202544
[1] b6378631c2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f0d1f21195)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add upstream patch ([1]) to fix '-fzero-call-used-regs' gcc compiler option
support detection
- add autoreconf as the patch touches m4/openssh.m4
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=14651
bitmap.c: In function ‘reserve’:
bitmap.c:98:1: sorry, unimplemented: ‘-fzero-call-used-regs’ not supported on this target
98 | }
| ^
[1] f107467179.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 66fd92a4ce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BIND 9.11 EOL in March, 2022. BIND 9.16 is current Stable/ESV version.
Changes:
* libuv (new dependency)
* openssl is now mandatory
* zlib must be detected with PKG_CONFIG_PATH (specifying zlib
installation path is not supported)
* bind9-config and isc-config.sh removed
* updated COPYRIGHT hash
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8adeaec8af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2022-24303: In show_file, use os.remove to remove temporary images
- CVE-2022-22817: Restrict builtins within lambdas for ImageMath.eval
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 07b070be39)
[Peter: mention security fixes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Different shells can have different behaviours when it comes to globbing
patterns. The dash shell (/bin/sh) on Debian testing switched to a
different fnmatch/glob implementation that results in this new behaviour:
Using bash:
$ mkdir /tmp/foo
$ echo /tmp/foo/.[^.]*
/tmp/foo/.[^.]*
Using dash:
$ mkdir /tmp/foo
$ echo /tmp/foo/.[^.]*
/tmp/foo/..
The current FAKEROOT script uses this shell glob pattern which now fails
on recent Debian testing systems:
rm: refusing to remove '.' or '..' directory: skipping '/build/buildroot-fs/cpio/target/run/..'
rm: refusing to remove '.' or '..' directory: skipping '/build/buildroot-fs/cpio/target/tmp/..'
Additionally, the glob will miss files which have at least two leading
dots, like ..foo ...bar or ......buz (highly improbable, but still).
It seems safer to use `find | xargs rm` here instead of relying on shell
globbing patterns.
Signed-off-by: Mathieu Mirmont <mat@parad0x.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 38c4f6b807)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove 001-dpp-fix-implicit-declaration-of-function-explicit_bz.patch
(upstream applied [1])
- Changelog (since 1.21, from [2]):
ver 1.24:
Fix issue with handshake and missing rekeying support.
Fix issue with BSS ranking and zero signal strength.
Fix issue with setting OWE IE length correctly.
ver 1.23:
Fix issue with handling handshake offloading.
Fix issue with at_console and D-Bus policy.
ver 1.22:
Fix issue with handling periodic scanning.
Fix issue with handling scanning completion.
Fix issue with handling scanning for OWE auto-connect.
Add support for additional DPP features.
[1] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=6ce41f621154eff0145dab41308bc145c0440f16
[2] https://git.kernel.org/pub/scm/network/wireless/iwd.git/tree/ChangeLog
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 92e0fe71de)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sshd is broken on 32-bit systems because ppoll_time64 is used by the
application although it is not allowed by the seccomp filter.
Apply the upstream patch to fix this.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 10c1d887d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Technologic Systems has rebranded as embeddedTS with the current
domain eventually going offline. Update web/doc URLs to correct
resource locations.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0b058e15f5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2022-03-17 22:32:15 +01:00
739 changed files with 11916 additions and 3647 deletions
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c: In function ?UsbIoBulkTransfer?:
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c:277:12: error: ?UsbHcBulkTransfer? accessing 80 bytes in a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
(cherry picked from commit ae8272ef787d80950803c521a13a308651bdc62e)
Subject: [PATCH] ACE/ace/SSL/SSL_Asynch_BIO.cpp: fix build with libressl
Fix the following build failure with libressl:
/home/autobuild/autobuild/instance-10/output-1/build/ace-7.0.6/ace/SSL/SSL_Asynch_BIO.cpp:174:7: error: 'BIO_get_init' was not declared in this scope; did you mean 'BIO_set_init'?
174 | if (BIO_get_init(pBIO) == 0 || p_stream == 0 || buf == 0 || len <= 0)
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c: In function 'add_certificate_to_store':
/nvmedata/autobuild/instance-20/output-1/build/azure-iot-sdk-c-LTS_01_2022_Ref01/c-utility/adapters/tlsio_openssl.c:961:24: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
