Fix the following build failure with aarch64 and BR2_OPTIMIZE_0 raised
since commit 0512910e49:
src/convert-neon-body-bayer8.inc.h: In function 'bayer2rgb_convert_neon':
src/convert-neon.c:233:17: error: third argument to '__builtin_prefetch' must be a constant
233 | __builtin_prefetch(((void const *)(_addr)) + 64, 0, (_lvl)); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/convert-neon-body-bayer8.inc.h:8:9: note: in expansion of macro 'do_prefetch'
8 | do_prefetch(&in[+1*stride - 1], (rows_per_loop) < 3 ? 3 : 0);
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/307c1c448becd99dfba3a17b3ef816db0bb5cad6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 13f8df8ed6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a7736afaca (package/opencv4-contrib: properly note dependencies
between modules) forgot to propagate the dependencies of selected
symbols, causing unmet dependencies warnings (unfortunately, not
errors), such as:
$ KCONFIG_SEED=0x9F66F854 make randconfig
WARNING: unmet direct dependencies detected for BR2_PACKAGE_OPENCV4_LIB_DNN
Depends on [n]: BR2_PACKAGE_OPENCV4 [=y] && !BR2_TOOLCHAIN_USES_UCLIBC [=y] && BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS [=y]
Selected by [y]:
- BR2_PACKAGE_OPENCV4_CONTRIB_LIB_DNN_OBJDETECT [=y] && BR2_PACKAGE_OPENCV4_CONTRIB [=y]
Propagate the dependencies and add associated comments.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a2e01b23fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
- CVE-2023-52425: Fix quadratic runtime issues with big tokens that can
cause denial of service, in partial where dealing with compressed XML
input. Applications that parsed a document in one go -- a single call
to functions XML_Parse or XML_ParseBuffer -- were not affected. The
smaller the chunks/buffers you use for parsing previously, the bigger
the problem prior to the fix.
- CVE-2023-52426: Fix billion laughs attacks for users compiling
*without* XML_DTD defined (which is not common). Users with XML_DTD
defined have been protected since Expat >=2.4.0 (and that was
CVE-2013-0340 back then).
https://blog.hartwork.org/posts/expat-2-6-0-released/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9dad5e7d7f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The section of the manual describing the makedev syntax is not
up-to-date with the current features, and does not properly describe
existing ones.
- extend the list of types with the requirements on the existence of
the target file or directory; for 'c', 'b', and 'p', the existence
requirement is inherited from mknod(2):
ERRORS
...
ENOENT A directory component in pathname does not exist or is a
dangling symbolic link.
for the other types, the existence requirements are extracted from
the source of makedev.c;
- format the types flags, so they are rendered in monospace;
- extend the 'mode' description, as it can be set to -1 for 'f', 'd',
or 'r', so that only the uid and gid are set. This is most useful
for 'r', where setting the same mode recursively for all the
sub-directories and files alike does not really make sense; indeed
in this case, the modes are usually set correctly when the package
(or rootfs overlay) installs the files, and only the uid and gid are
interesting to set;
- extend and update the examples to show-case the -1 mode use-case.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 738fb6dfa4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpe:2.3:a:green_end:sftpserver has been deprecated in favor of
cpe:2.3:a:greenend:sftpserver in December 2022:
<cpe-item name="cpe:/a:green_end:sftpserver:0.2.2" deprecated="true" deprecation_date="2022-12-30T17:53:22.797Z">
<reference href="https://github.com/ewxrjk/sftpserver/releases">Version</reference>
<reference href="http://www.greenend.org.uk/rjk/sftpserver/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:green_end:sftpserver:0.2.2:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:greenend:sftpserver:0.2.2:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4adc8b3d24)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the list of licenses is present in the show-info output, the list
of license files and the redistributable status were missing. Add them.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5647d5c190)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable lua bindings to avoid the following build failure if host-lua
and lua are built before brltty raised since bump to version 6.5 in
commit 82c6e87d5e and
42bf48ca01:
configure: lua package: lua
configure: lua includes:
configure: lua libs: -L/home/autobuild/autobuild/instance-0/output-1/host/bin/../sparc64-buildroot-linux-gnu/sysroot/usr/lib -llua -lm -ldl
checking for lua5.4... no
checking for lua... /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua shell: /home/autobuild/autobuild/instance-0/output-1/host/bin/lua
configure: Lua library directory: /home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
[...]
/usr/bin/install -c -d /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
/usr/bin/install -c -s --strip-program /bin/true brlapi.so /home/autobuild/autobuild/instance-0/output-1/target/home/autobuild/autobuild/instance-0/output-1/host/lib/lua/5.3
make[3]: Leaving directory '/home/autobuild/autobuild/instance-0/output-1/build/brltty-6.6/Bindings/Lua'
[...]
brltty: installs files in /home/autobuild/autobuild/instance-0/output-1/target//home/autobuild/autobuild/instance-0/output-1
While at it, disable emacs bindings which have also been added in
version 6.5 with
64a487e299
Fixes:
- http://autobuild.buildroot.org/results/f424e6727bbe61ea4b7703e93aae6fcab7506898
- http://autobuild.buildroot.org/results/bf4a161fc66fb99a24f08bea3436b13738f2e383
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 19f06441e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use pkg-config to find libnet and avoid the following build failure
raised since commit 100ba8351c if
libnet-config is found on the host:
/home/autobuild/autobuild/instance-4/output-1/host/bin/mips64el-buildroot-linux-gnu-gcc -s -o ngrep ngrep.o tcpkill.o -lpcap -lnet -lpcre -L/usr/lib -lnet
mips64el-buildroot-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
While at it, format Upstream tag of other patches
Fixes:
- http://autobuild.buildroot.org/results/05c916162b9c1027cf53f1699a1f5653151098ed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 14c0c37eaf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The http://pagesperso-orange.fr service being down,
http://pagesperso-orange.fr/sebastien.godard/ is no longer
accessible (or more precisely serves some HTML junk), meaning that we
currently cannot download the tarball of sysstat from the official
upstream location, and we always fallback to sources.buildroot.net.
This commit therefore updates to use the new upstream location on
github.io. The 12.6.1 release is available there, with the same hash,
so we can just point to the new upstream location.
Fixes:
ERROR: while checking hashes from package/sysstat//sysstat.hash
ERROR: sysstat-12.6.1.tar.xz has wrong sha1 hash:
ERROR: expected: a730982e0c2d4964a0022c1509f3ea0a345402bc
ERROR: got : d64a079729f2ff5b304294d68fbc041a46c4966d
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 35a2cb0227)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Setting HAPROXY_CFLAGS on the haproxy build command line overrides CFLAGS
which were internally set by the haproxy Makefile.
Among those omitted CFLAGS is -fwrapv. Compiling haproxy without it and
and then running the program results in runtime error:
$ haproxy
FATAL ERROR: invalid code detected -- cannot go further, please recompile!
...
To address this issue, include HAPROXY_CFLAGS in the DEFINE variable instead
of CFLAGS in haproxy.mk.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9b90ef6178)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 363b4ebf1a set DBUS_CPE_ID_PRODUCT
to dbus but this is not needed as DBUS_CPE_ID_PRODUCT will be set to the
package name (i.e. dbus) by default
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b878e7bbbc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpe:2.3:a:flex_project:flex has been deprecated in favor of
cpe:2.3:a:westes:flex in October 2023:
<cpe-item name="cpe:/a:flex_project:flex:2.6.4" deprecated="true" deprecation_date="2023-10-06T17:12:20.950Z">
<title xml:lang="en-US">Flex Fast Lexical Analyser 2.6.4</title>
<reference href="https://github.com/westes/flex/releases">Version</reference>
<reference href="https://github.com/westes/flex/">Product</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:flex_project:flex:2.6.4:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:westes:flex:2.6.4:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c438422d49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpe:2.3:a:json-c_project:json-c has been deprecated in favor of
cpe:2.3:a:json-c:json-c in September 2023:
<cpe-item name="cpe:/a:json-c_project:json-c:0.14" deprecated="true" deprecation_date="2023-09-16T13:05:58.643Z">
<title xml:lang="en-US">JSON-C Project JSON-C 0.14</title>
<reference href="https://github.com/json-c/json-c/releases">Version</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:json-c_project:json-c:0.14:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:json-c:json-c:0.14-20200419:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 63118fbb55)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpe:2.3:a:libxpm_project:libxpm has been deprecated in favor of
cpe:2.3:a:x.org:libxpm in October 2023:
<cpe-item name="cpe:/a:libxpm_project:libxpm:3.5.15" deprecated="true" deprecation_date="2023-10-17T15:55:35.850Z">
<title xml:lang="en-US">Libxpm Project Libxpm 3.5.15</title>
<reference href="https://gitlab.freedesktop.org/xorg/lib/libxpm/-/tags">Version</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:libxpm_project:libxpm:3.5.15:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:x.org:libxpm:3.5.15:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 03a9171cce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpe:2.3:a:netatalk_project:netatalk has been deprecated in favor of
cpe:2.3:a:netatalk:netatalk in September 2023:
<cpe-item name="cpe:/a:netatalk_project:netatalk:3.1.13" deprecated="true" deprecation_date="2023-09-29T11:15:00.340Z">
<reference href="https://sourceforge.net/projects/netatalk/files/netatalk/">Version</reference>
<cpe-23:cpe23-item name="cpe:2.3:a:netatalk_project:netatalk:3.1.13:*:*:*:*:*:*:*">
<cpe-23:deprecated-by name="cpe:2.3:a:netatalk:netatalk:3.1.13:*:*:*:*:*:*:*" type="NAME_CORRECTION"/>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5ae38ec621)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2024-23770: Local Leak of Authentication Parameter in Process List
CVE-2024-23771: Basic Auth Timing Attack
https://security.opensuse.org/2024/01/22/darkhttpd-basic-auth-issues.html
Notice that CVE-2024-23770 is only documented as a known weakness, not
fixed.
Also change the license logic to use the dedicated COPYING file available
since 1.14:
a8ae2b1de0
This license is ISC, not MIT - So adjust DARKHTTPD_LICENSE to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0c7fd35947)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit c07aafa087 (package/Makefile.in: set GIT_DIR=. in {HOST,
TARGET}_MAKE_ENV) added GIT_DIR=. to TARGET_MAKE_ENV (which is included in
TARGET_CONFIGURE_OPTS) to work around issues with packages getting confused
when building in a subdir of the Buildroot git repo.
This unfortunately also causes git commands to fail when
output/host/environment-setup is sourced:
git status
fatal: not a git repository: '.'
So strip GIT_DIR= from TARGET_CONFIGURE_OPTS when generating
environment-setup.
Reported-by: Mircea Gliga <gliga.mircea@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 48874afb9d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was added upstream in commit:
22e4c03866
The 'USE_OPENGL_OR_ES' flag is default ON, which will enable 'USE_GBM',
so ensure that we unset 'USE_GBM' if we don't have libgbm.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Tested-by: Adrian Perez de Castro <aperez@igalia.com>
Acked-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c06c0197f9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow enabling support for both the X11 and Wayland backends.
This in turn needs reorganizing how desktop GL or OpenGL ES is chosen,
as it no longer can depend on whether Wayland support is enabled: the
BR2_PACKAGE_HAS_LIBGL and BR2_PACKAGE_HAS_LIBGLES variables are both
checked, and ENABLE_GLES2 is set only if the package providing OpenGL
claims only GLES is supported; otherwise desktop GL is preferred. This
matches the existing logic.
The existing comment indicating that only one of both windowing systems
can be enabled was wrong: the same WebKitGTK build can target both
X11 and Wayland at the same time, as long as GTK itself has been built
accordingly. Enabling both is the approach taken by most Linux
distributions, and has been supported for years.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a23251d3f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Switch to .tar.gz as the announcement mail only contained hashes for that:
https://lists.x.org/archives/xorg-announce/2024-January/003442.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 219178ef3e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1) CVE-2023-6816 can be triggered by passing an invalid array index to
DeviceFocusEvent or ProcXIQueryPointer.
2) CVE-2024-0229 can be triggered if a device has both a button and a
key class and zero buttons.
3) CVE-2024-21885 can be triggered if a device with a given ID was
removed and a new device with the same ID added both in the same
operation.
4) CVE-2024-21886 can be triggered by disabling a master device with
disabled slave devices.
5) CVE-2024-0409 can be triggered by enabling SELinux
xserver_object_manager and running a client.
6) CVE-2024-0408 can be triggered by enabling SELinux
xserver_object_manager and creating a GLX PBuffer.
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2024-January/003444.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b8d9e75eb8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
see CVE-2024-0553: Fix more timing side-channel inside RSA-PSK key exchange
see CVE-2024-0567: Fix assertion failure when verifying a certificate chain with a cycle of cross signatures
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b136bed2fd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variable should be a YES/NO value, FALSE is not a valid value.
E.g. the yesno-to-bool cmd does not translate a FALSE value and therefore returns invalid JSON.
Signed-off-by: Maximilian Senftleben <maximilian.senftleben@frogblue-tec.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9fa01e3097)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The MICROPYTHON_MAKE_ENV variable contained two things;
- the comon target environment variables CC, CFLAGS et al. defined in
TARGET_MAKE_ENV,
- the GIT_DIR workaround
Commit 9024e18665 (package/micropython: drop GIT_DIR=. workaround)
totally dropped the assignment to MICROPYTHON_MAKE_ENV, but did not
replace its expansin with TARGET_MAKE_ENV.
This yields build error like:
LINK build-standard/micropython
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib64/../lib64'
Fix this by expanding TARGET_MAKE_ENV in lieu of MICROPYTHON_MAKE_ENV.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6c9be611a8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
================================================================================
Redis 7.0.15 Released Tue 09 Jan 2024 10:45:52 IST
================================================================================
Upgrade urgency SECURITY: See security fixes below.
Security fixes
==============
* (CVE-2023-41056) In some cases, Redis may incorrectly handle resizing of memory
buffers which can result in incorrect accounting of buffer sizes and lead to
heap overflow and potential remote code execution.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As found out by Yann E. Morin in [1], apcupsd configure script is ugly,
and uses gcc to do the link line-wrapping which will raise the following
build failure with gcc 13:
/home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64le-buildroot-linux-gnu/13.2.0/../../../../powerpc64le-buildroot-linux-gnu/lib/../lib64/libsupc++.a(eh_alloc.o): in function `std::basic_string_view<char, std::char_traits<char> >::compare(unsigned long, unsigned long, char const*, unsigned long) const':
eh_alloc.cc:(.text._ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm[_ZNKSt17basic_string_viewIcSt11char_traitsIcEE7compareEmmPKcm]+0x44): undefined reference to `std::__throw_out_of_range_fmt(char const*, ...)'
It will also raise the following build failure on sparc/arc:
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-3/output-1/host/arceb-buildroot-linux-uclibc/sysroot/lib/libsupc++.a(eh_throw.o): in function `__exchange_and_add_dispatch':
/SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
/home/autobuild/autobuild/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arceb-snps-linux-uclibc/9.2.1/../../../../arceb-snps-linux-uclibc/bin/ld: /SCRATCH/arcjenkins2/slaves/ru20-custom-arcgnu2/workspace/arcoss_verification/arc_gnu_toolchain_release/arc_gnu_toolchain_release/bd-uclibceb/gcc-stage2/arceb-snps-linux-uclibc/libstdc++-v3/include/ext/atomicity.h:82: undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
Instead of trying to patch the configure script as advocated by
Yann E. Morin, set LD to TARGET_CXX as:
- this solution is quicker
- usptream is dead (last release in 2016)
- this solution has already been used in other packages (nodejs, zmqpp)
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20200812171821.2517-1-Evgeniy.Didin@synopsys.com/
Fixes:
- http://autobuild.buildroot.org/results/6096c3ddc5edf3204635c2c90246c2e8c8e074e7
- http://autobuild.buildroot.org/results/d8a/d8a3ab31c5b86871c7e1117f4ffa7b6cedfcb7e0/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cd2dcaa6c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The condition checking whether the webrtc-audio-processing package is
enabled, added in commit
3ccd3b4c38 ("package/pipewire: bump to
version 0.3.32") is obviously incorrect, and can never be true.
Fix the condition to use the correct variable instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 52f8db409f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of packages try to detect if they are running in a git repo and run
git describe at build time instead of using the hard coded version number if
it succeed, leading to odd version numbers as they end up picking up the
Buildroot git version if building inside a Buildroot git checkout, E.G.:
rauc --version
rauc 2023.11-562-g9c954953b4+
This is because rauc builds with meson and uses vcs_tag:
https://github.com/rauc/rauc/blob/v1.11/meson.build#L168-L171https://mesonbuild.com/Reference-manual_functions.html#vcs_tag
Another example is micropython, where we already work around it by passing
GIT_DIR=.
In the context of Buildroot the packages are never built in their own git
checkout, so pass GIT_DIR=. to ensure git doesn't walk back up the
directory tree and finds the Buildroot git repo, which fixes the rauc (and
similar) issues.
>>> rauc 1.11 Building
..
ninja: Entering directory `/home/peko/source/buildroot/output-rauc/build/rauc-1.11//build'
[1/29] Generating version.h with a custom command
fatal: not a git repository: '.'
cat output-rauc/build/rauc-1.11/build/version.h
#define PACKAGE_STRING "rauc 1.11"
#define PACKAGE_VERSION "1.11"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c07aafa087)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 768f9f80f6 (support/download: generate even more reproducible
tarballs) causes non-reproducibility in tarballs we previousy
generated, especially the archives for two cargo-vendored packages,
ripgrep and sentry-cli.
The cause is that those two pakcages eventually vendor a file that has
the u+x bit set, but is otehrwise go-x. With 768f9f80f6, the files are
now go+x, so the hash for those generated archives has changed.
Besides, that commit was wrong: it did not account for the 'r' bit for
go part, leaving some non-reproducibility still unaccounted for.
So, to generate really reproducible archives, we would need to fix that
read bit as well, and that has the potential to affect all the archives
we generated so far. If we wanted to do so, we'd need a way to version
all generated archives, like we do for git and svn, but now for all the
different CVSes, as well as for all the vendoring post-processes.
For 768f9f80f6, all that was of conern was the working copies of CVSes
(i.e. git, svn, cvs...) that we cache in the Buildroot download dir, not
the temporary files during post-processing. Indeed, in that latter case,
the user has virtually no way to mangle with the mode of the
intermediate extract before repack.
And we do have a big fat warning that users should not attempt to meddle
with the git tree that Buildroot caches.
As 768f9f80f6 however demonstrates, is that it took quite a long time
between the introduction of the git caching, and the time someone
eventually discovered they could meddle in there. This shows that the
issue it not actually critical in most setups.
Also, the tar manual [0] hints at a better solution to handle
reproducibility, which even avoids touching the files on disk which is
even nicer:
‘--mode='go+u,go-w'’
Omit irrelevant information about file permissions.
If we were to actually handle the mode bit for reproducibility, we'd
need to:
- introduce archive versioning for all download backends and
prost-processing
- use the tar officially suggested method
So, revert that change, as it was incomplete, was not really fixing much
issues, and causes actual issues.
This reverts commit 768f9f80f6.
[0] https://www.gnu.org/software/tar/manual/tar.html#Reproducibility
Thanks to Vincent and Arnout for pointing at the tar manual.
Reported-by: Antoine Coutant <antoine.coutant@smile.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Antoine Coutant <antoine.coutant@smile.fr>
(cherry picked from commit 9fbd3d8574)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use official tarball
- Update hash of license file (some packages have been added or removed
but the list of licenses is the same)
- Fix CVE-2023-7158: A vulnerability was found in MicroPython up to
1.21.0. It has been classified as critical. Affected is the function
slice_indices of the file objslice.c. The manipulation leads to
heap-based buffer overflow. It is possible to launch the attack
remotely. The exploit has been disclosed to the public and may be
used. Upgrading to version 1.22.0 is able to address this issue. It is
recommended to upgrade the affected component. The identifier of this
vulnerability is VDB-249180.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1e12b7dd49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update site to avoid redirections (HSTS, etc.)
Version 5.0.3 - 12/17/2023
A memory leak fix in the prior version wasn't applied correctly, resulting
in an invalid memory access causing a crash. Bug fixed.
Version 5.0.2 - 11/8/2023
Fixed bug that caused crash when a CLIENT_KEY arrived out of order
Fixed option handling on Windows when an argument is missing
https://sourceforge.net/projects/uftp-multicast/files/Changes.txt/download
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bfe2fe2269)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This usage of <PKG>_NAME was introduced in commit f9e9c6349a
("package/rng-tools: bump to 6.7"). No other package uses <PKG>_NAME
this way.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a2b8596873)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure without neon raised since bump to
version 1.4.0 in commit 2f7f8f3813 and
c821187dd9:
/home/peko/autobuild/instance-0/output-1/host/bin/arm-none-linux-gnueabi-gcc -std=gnu11 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -D_FORTIFY_SOURCE=2 -ffast-math -mcpu=cortex-a7 -mfloat-abi=hard -mfpu=neon-vfpv4 -Wall -fPIC -Wno-deprecated -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I. -Iinclude -c -o src/audio/src/cvsd.o src/audio/src/cvsd.c
In file included from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/features.h:388:0,
from /home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/stdlib.h:24,
from src/libliquid.c:25:
/home/peko/autobuild/instance-0/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/gnu/stubs.h:10:29: fatal error: gnu/stubs-hard.h: No such file or directory
# include <gnu/stubs-hard.h>
^
Indeed, upstream considers that NEON is available on all ARM platforms,
and their configure.ac contains that code snippet:
239 arm|armv7*|armv8*)
240 # assume neon instructions are available
241 # TODO: check for Neon availability
242
243 # ARM architecture : use neon extensions
Fixes:
- http://autobuild.buildroot.org/results/36b3c2220c462e7a20262fd1b9064d9aeb6c9ec4
- http://autobuild.buildroot.org/results/881826b4b6c141e59a0da2d7d1ad55d3709fdb95
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- refactor with LIQUID_DSP_SIMDOVERRIDE
- add comment about --disable-simdoverride
- extend commit log with upstream code snippet
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9501bc80f5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libaio is only needed for standard install
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ee9c92e4a4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--{dis,en}able-avahi is unrecognized since bump to version 2.3.3op2 in
commit 8cf034ab0f (which switched upstream
location from apple to openprinting):
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --disable-systemd, --disable-avahi
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 36743d6175)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With [1], [2] & [3] we made sure Buildroot packages get built with
proper MMU page size assumed. This was done nicely through insertion of
required flags into the toolchain wrapper so that there's no need to
pass these flags to each and every package separately - toolchain
wrapper used for real building has all set internally and so proper
flags are implicitly used.
But there's yet another corner case which is not handled that way -
these are binaries or rather libraries which are being used as a part of
GCC compilation: libgcc_s.so.1 and libstdc++.so.
And so to make sure both the libraries get built properly we need to
set TARGET_CFLAGS (cures libgcc_s.so) & TARGET_LDFLAGS (cures
libstdc++.so).
In case of ARM by defaut 64 KiB page size seems to be used, as w/o
that patch we see the following for BR2_ARM64_PAGE_SIZE_4K=y:
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x10000
LOAD 0x000000000001fd98 0x000000000002fd98 0x000000000002fd98
0x0000000000000438 0x00000000000005c8 RW 0x10000
DYNAMIC 0x000000000001fdb8 0x000000000002fdb8 0x000000000002fdb8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x10000
LOAD 0x00000000001d5760 0x00000000001e5760 0x00000000001e5760
0x000000000000e528 0x0000000000012de8 RW 0x10000
DYNAMIC 0x00000000001deef0 0x00000000001eeef0 0x00000000001eeef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
Note alignment of 0x10000 in sections marked for loading.
And with the patch applied we get expected alignment of 0x1000 (4
KiB):
--------------------------->8----------------------------
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/lib/libgcc_s.so.1
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 6 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000013d1c 0x0000000000013d1c R E 0x1000
LOAD 0x0000000000013d98 0x0000000000014d98 0x0000000000014d98
0x0000000000000438 0x00000000000005c8 RW 0x1000
DYNAMIC 0x0000000000013db8 0x0000000000014db8 0x0000000000014db8
0x0000000000000200 0x0000000000000200 RW 0x8
$ ./output/host/bin/aarch64-linux-readelf -l ./output/target/usr/lib/libstdc++.so.6.0.32
Elf file type is DYN (Shared object file)
Entry point 0x0
There are 7 program headers, starting at offset 64
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x00000000001d3462 0x00000000001d3462 R E 0x1000
LOAD 0x00000000001d3760 0x00000000001d4760 0x00000000001d4760
0x000000000000e528 0x0000000000012de8 RW 0x1000
DYNAMIC 0x00000000001dcef0 0x00000000001ddef0 0x00000000001ddef0
0x0000000000000240 0x0000000000000240 RW 0x8
--------------------------->8----------------------------
A nice side effect is that we can get rid of the special handling of
"-matomic" as it's already part of ARCH_TOOLCHAIN_WRAPPER_OPTS.
[1] https://git.buildroot.net/buildroot/commit/?id=3cc2c6d19ab2e1bb4634f26f9318da9b07df5fff
[2] https://git.buildroot.net/buildroot/commit/?id=dcb74db89e74e512e36b32cea6f574a1a1ca84c4
[3] https://git.buildroot.net/buildroot/commit/?id=5e52c28397b79f8c4c99552217cbe95202166626
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vladimir Isaev <VVIsaev@gmail.com>
Signed-off-by: Pavel Kozlov <kozlov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 747dff5a36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following musl build failure with powerpc raised since bump to
version 2.14 in commit c6addf4606:
In file included from fault.h:36,
from handler-unix.c:77,
from handler.c:19:
handler-unix.c: In function 'sigsegv_handler':
fault-linux-powerpc.h:35:73: error: 'mcontext_t' has no member named 'uc_regs'; did you mean 'gregs'?
35 | # define SIGSEGV_FAULT_STACKPOINTER ((ucontext_t *) ucp)->uc_mcontext.uc_regs->gregs[1]
| ^~~~~~~
handler-unix.c:157:43: note: in expansion of macro 'SIGSEGV_FAULT_STACKPOINTER'
157 | uintptr_t old_sp = (uintptr_t) (SIGSEGV_FAULT_STACKPOINTER);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/77b600071f07605be3ec28e2da46d6938e240087
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 74f401025d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
giflib and qhull are mandatory since the addition of the package in
commit 1e64fa2956 and
cb136fc051
Indeed, as explained in above commit, internal (bundled) libraries will
be used if GDAL_USE_GIF and GDAL_USE_QHULL are set to OFF
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4c6ff16cf2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bumping libssh2 to 1.11.0 with buildroot commit
af87ad197c
causes build errors with libcurl due to "-R" being added to libssh2.pc.
Quoting autobuilder build-end.log
checking for recv... no
configure: error: Unable to link function recv
Quoting autobuilder libcurl-8.1.2/config.log
arc-buildroot-linux-uclibc-gcc.br_real: error: unrecognized command-line option '-R'
Fixes:
http://autobuild.buildroot.net/results/78f/78ffda92d51f8abdbcef93f968ace432d0d44979/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 409a5f9876)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann reported in [1] that edk2 build could sometimes fail. The issue
can be reproduced when per-package directories is enabled, or also
when building on a system with GNU Make >= 4.4 using the
"--shuffle=reverse" option (such as Fedora 39). Those are pointing
toward a Makefile dependency issue.
The issue can be reproduced with commands:
cat > .config <<EOF
BR2_riscv=y
BR2_RISCV_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TARGET_EDK2=y
EOF
make olddefconfig
Then, building either with:
make --shuffle=reverse
Or:
utils/config -e BR2_PER_PACKAGE_DIRECTORIES
make olddefconfig
make -j$(nproc)
It is interesting to mention that when using "make --shuffle=reverse"
to build, the build can be completed if restarted only with "make". It
will not pull any other Buildroot package. This fact hints toward a
Makefile dependency issue internal to the EDK2 build system, rather
than in the Buildroot recipe.
The EDK2 build system is quite unique. See [2]. It generates files,
makefiles and internally uses GNU Make to compile code. This system is
likely not tested as being a sub-Make process in a complex Makefile
such as Buildroot.
In order to prevent Buildroot to pass unexpected Make flags to the
EDK2 sub-Make, this commit unset the MAKEFLAGS variable in the EDK2
build environment. This will put the EDK2 build script in a more
common and tested state. See GNU Make documentation about recursive use
of Make, more specifically [3].
Note: as mentioned, the build failure is likely due to an internal
issue of the EDK2 build system. The failure points to a missing
dependency in the EDK2 generator itself. This commit does not fix this
issue, but rather put the EDK2 build system in a normalized
environment, avoiding Buildroot flags being passed to the internal
EDK2 sub-Make invocation. The upstream EDK2 build system most likely
need a fix too.
Fixes:
make[2]: *** No rule to make target '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp/DEBUG/UiApp.efi', needed by '/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/FV/Ffs/462CAA21-7614-4503-836E-8AB6F4662331UiApp/UiApp.offset'. Stop.
build.py...
: error 7000: Failed to execute command
make tbuild [/buildroot/output/build/edk2-edk2-stable202308/Build/RiscVVirtQemu/RELEASE_GCC5/RISCV64/MdeModulePkg/Application/UiApp/UiApp]
build.py...
: error F002: Failed to build module
/buildroot/output/build/edk2-edk2-stable202308/MdeModulePkg/Application/UiApp/UiApp.inf [RISCV64, GCC5, RELEASE]
[1] https://lists.buildroot.org/pipermail/buildroot/2023-December/681507.html
[2] https://tianocore-docs.github.io/edk2-BuildSpecification/draft/4_edk_ii_build_process_overview/42_build_process_overview.html
[3] https://www.gnu.org/software/make/manual/make.html#Options_002fRecursion
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 44af6938fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1) CVE-2023-6377: X.Org server: Out-of-bounds memory write in XKB button actions
A device has XKB button actions for each button on the device. When a
logical device switch happens (e.g. moving from a touchpad to a mouse), the
server re-calculates the information available on the respective master
device (typically the Virtual Core Pointer). This re-calculation only
allocated enough memory for a single XKB action rather instead of enough for
the newly active physical device's number of button. As a result, querying
or changing the XKB button actions results in out-of-bounds memory reads and
writes.
This may lead to local privilege escalation if the server is run as root or
remote code execution (e.g. x11 over ssh).
2) CVE-2023-6478: X.Org server: Out-of-bounds memory read in
RRChangeOutputProperty and RRChangeProviderProperty
This fixes an OOB read and the resulting information disclosure.
Length calculation for the request was clipped to a 32-bit integer. With
the correct stuff->nUnits value the expected request size was truncated,
passing the REQUEST_FIXED_SIZE check.
The server then proceeded with reading at least stuff->nUnits bytes
(depending on stuff->format) from the request and stuffing whatever it finds
into the property. In the process it would also allocate at least
stuff->nUnits bytes, i.e. 4GB.
See also CVE-2022-46344 where this issue was fixed for other requests.
For more details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-December/003435.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9b62f5905e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 5770a645a3 ("package/qt5:
bump packages to latest kde submodule versions"), the
QT_HEADERS_SYNC_HOOK hook no longer calls the syncqt.pl script, so
host-perl is no longer needed as a dependency of running this
hook (and as a dependency of building Qt).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b678091a1c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_DOWNLOAD_FORCE_CHECK_HASHES currently has the following
dependency:
depends on BR2_GLOBAL_PATCH_DIR != ""
However, strictly speaking checking all hashes does not necessarily
require using BR2_GLOBAL_PATCH_DIR, as long as you don't use custom
versions.
But more importantly:
- Having this dependency means that this options is hidden when people
don't use BR2_GLOBAL_PATCH_DIR. Instead the option should always be
made visible, encouraging people to turn it on.
- The Config.in comment was there to mitigate this previous argument,
but this comment then shows up all the time when you have an empty
global patch dir.
This seems over-complicated, and it sounds much easier to have the
option unconditionally available, and visible, and clarify in its help
text that in order to this to work fully with custom package versions,
BR2_GLOBAL_PATCH_DIR can be used to provide extra hash files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix typo noticed by Peter K.
- reword kast sentence after review by Peter K.
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5b0c02a77a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patches (already in version) and so drop autoreconf
- Fix the following security issues:
- CVE-2023-40660: Fix Potential PIN bypass
- CVE-2023-40661: Important dynamic analyzers reports
- CVE-2023-4535: Out-of-bounds read in MyEID driver handling
encryption using symmetric keys
https://github.com/OpenSC/OpenSC/releases/tag/0.24.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 37eb68c9fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with libressl >= 3.8 raised since bump
of libressl to version 3.8.2 in commit
21eca49ed5:
In file included from card-westcos.c:37:
/home/autobuild/autobuild/instance-11/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/openssl/evp.h:627:32: error: macro "EVP_sha3_224" passed 1 arguments, but takes just 0
627 | const EVP_MD *EVP_sha3_224(void);
| ^
Fixes:
- http://autobuild.buildroot.org/results/cecee659371f370bf4bd2b27a4752bf20ceff326
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e8ca87083b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described in the announcement, this fixes a security issue:
There is one security fix in this release:
- Fix for a newly discovered security issue known as the 'Terrapin'
attack, also numbered CVE-2023-48795. The issue affects widely-used
OpenSSH extensions to the SSH protocol: the ChaCha20+Poly1305
cipher system, and 'encrypt-then-MAC' mode.
In order to benefit from the fix, you must be using a fixed version
of PuTTY _and_ a server with the fix, so that they can agree to
adopt a modified version of the protocol. Alternatively, you may be
able to reconfigure PuTTY to avoid selecting any of the affected
modes.
If PuTTY 0.80 connects to an SSH server without the fix, it will
warn you if the initial protocol negotiation chooses an insecure
mode to run the connection in, so that you can abandon the
connection. If it's possible to alter PuTTY's configuration to
avoid the problem, then the warning message will tell you how to do
it.
https://lists.tartarus.org/pipermail/putty-announce/2023/000037.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 922132c39e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version 0.78
in commit 5673ea3ce4:
In file included from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/putty.h:8,
from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/callback.c:8:
/home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/unix/platform.h:11:10: fatal error: dlfcn.h: No such file or directory
11 | #include <dlfcn.h> /* Dynamic library loading */
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/06f0b14bd0414f97b06070198e290fb3253348c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3d8e0a263f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
5 CVEs affecting glibc according to the NVD database are considered as
not being security issues by upstream glibc developers:
* CVE-2010-4756: The glob implementation in the GNU C Library (aka
glibc or libc6) allows remote authenticated users to cause a denial
of service (CPU and memory consumption) via crafted glob expressions
that do not match any pathnames. glibc maintainers position: "That's
standard POSIX behaviour implemented by (e)glibc. Applications using
glob need to impose limits for themselves"
* CVE-2019-1010022: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass stack guard
protection. The component is: nptl. The attack vector is: Exploit
stack buffer overflow vulnerability and use this bypass
vulnerability to bypass stack guard. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22850"
* CVE-2019-1010023: GNU Libc current is affected by: Re-mapping
current loaded library with malicious ELF file. The impact is: In
worst case attacker may evaluate privileges. The component is:
libld. The attack vector is: Attacker sends 2 ELF files to victim
and asks to run ldd on it. ldd execute code. NOTE: Upstream comments
indicate "this is being treated as a non-security bug and no real
threat. glibc maintainers position: "Not treated as a security issue
by upstream https://sourceware.org/bugzilla/show_bug.cgi?id=22851"
* CVE-2019-1010024: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may bypass ASLR using cache of
thread stack and heap. The component is: glibc. NOTE: Upstream
comments indicate "this is being treated as a non-security bug and
no real threat. glibc maintainers position: "Not treated as a
security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22852"
* CVE-2019-1010025: GNU Libc current is affected by: Mitigation
bypass. The impact is: Attacker may guess the heap addresses of
pthread_created thread. The component is: glibc. NOTE: the vendor's
position is "ASLR bypass itself is not a vulnerability. Glibc
maintainers position: "Not treated as a security issue by upstream
https://sourceware.org/bugzilla/show_bug.cgi?id=22853"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit adaae82c58)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in bug 15895, the GLIBC_VERSION field having a value
looking like 2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701, it
prevents the CPE/CVE matching with the NVD database to work correctly.
This commit fixes that by defining GLIBC_CPE_ID_VERSION, derived from
GLIBC_VERSION, by extracting the base version.
Also, we update GLIBC_IGNORE_CVES to account for the CVEs that have
clearly been fixed between 2.38 and
2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701. There are a number
of other CVEs still affecting the glibc package, but they are not
related to this
2.38...2.38-27-g750a45a783906a19591fb8ff6b7841470f1f5701 range.
Fixes: #15895
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit af8c0e5c74)
[Peter: adjust for glibc 2.36.x on 2023.02.x]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenSSH 9.6 was released on 2023-12-18.
This release contains fixes for a newly-discovered weakness in the
SSH transport protocol (the "Terrapin" attack), a logic error relating
to constrained PKCS#11 keys in ssh-agent(1) and countermeasures for
programs that invoke ssh(1) with user or hostnames containing invalid
characters.
https://www.openssh.com/txt/release-9.6
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3c047ea463)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
linux-pam is required to login via OpenSSH if the upstream refpolicy for
SELinux is enaabled, as linux-pam handles changing user contexts. If a
user wants to make their own policy and use a refpolicy via git, we of course
should let them do so. As such, only select linux-pam if the upstream version
of refpolicy is selected.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2c5a82a29c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the update of Python to version 3.11 in commit
738500c296 ("package/python3: bump to
version 3.11.0"), python-sip fails to compile with:
siplib.c: In function ‘sip_api_get_frame’:
siplib.c:13750:22: error: invalid use of undefined type ‘struct _frame’
13750 | frame = frame->f_back;
This is due to a change in the Python C API, which is fixed by a new
patch. The patch can't be upstreamed, as SIP 4.x is no longer
maintained upstream.
Fixes:
http://autobuild.buildroot.net/results/7b01739e7514e48c06182bc1804b32497ce2e414/
Signed-off-by: Ralf Dragon <hypnotoad@lindra.de>
[Thomas: improved commit log, reformatted patch using Git]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3ef6884e6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-5367 X.Org server: OOB write in
XIChangeDeviceProperty/RRChangeOutputProperty
- CVE-2023-5380: Use-after-free bug in DestroyWindow
- CVE-2023-5574: Use-after-free bug in DamageDestroy
For details, see the advisory:
https://lists.x.org/archives/xorg-announce/2023-October/003430.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 36a9ec8921)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rsync is used in the infrastructure, mostly for the per-package infra,
and for the override-srcdir mechanism, but also to build the manual.
As such, it is not optional but mandatory, and already listed so.
Drop the reference to rsync from the list of optional packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b79fb3c224)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-46218: cookie mixed case PSL bypass
This flaw allows a malicious HTTP server to set "super cookies" in curl
that are then passed back to more origins than what is otherwise allowed
or possible. This allows a site to set cookies that then would get sent
to different and unrelated sites and domains.
https://curl.se/docs/CVE-2023-46218.html
- CVE-2023-46219: HSTS long file name clears contents
When saving HSTS data to an excessively long file name, curl could end up
removing all contents, making subsequent requests using that file unaware
of the HSTS status they should otherwise use.
https://curl.se/docs/CVE-2023-46219.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aaa9438b96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5834758777
Commit e7d16c35a (boot/arm-trusted-firmware: fix the RPATH of fiptool) tried
to fix the build of host-fiptool, but forgot to pass HOST_CFLAGS.
On hosts without (compatible) openssl development headers, this breaks
the build when it cannot find the openssl headers:
fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e6ef64d955)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The arm-trusted-firmware package builds a host tool called "fiptool",
which is used during the build process of arm-trusted-firmware
itself. This tool links against the OpenSSL host library, and
therefore needs to be built with the correct RPATH pointing to
$HOST_DIR/lib.
This is why commit a957d9a90a
("boot/arm-trusted-firmware: build fiptool separately with dependency
o n host-openssl") added the ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL
variable, which builds the fiptool tool first, with the right
variables set, before invoking the full build of TF-A. This ensured
that fiptool was built with the correct RPATH.
However, more recent versions of TF-A have modified their Makefile
machinery, and fiptool is being rebuilt even if it was built
before. Unfortunately, this rebuild is no longer done with the right
flags, so we end up with a fiptool binary that no longer has the right
RPATH, and fiptool fails to find the OpenSSL libraries from
$HOST_DIR/lib.
In order to fix this, we take a different approach: we do not build
fiptool separately first, but we inject the necessary flags through
the HOSTCC variable. Indeed, there's no HOST_LDFLAGS or HOST_LDLIBS
variable or similar that would allow us to pass the -Wl,-rpath flag
that is needed. Shoe-horning this flag into HOSTCC gets the job done,
and actually simplifies our arm-trusted-firmware.mk.
This patch break the compatibility with version prior to 1.4 (upstream
commit 72610c4102990 ("build: Introduce HOSTCC flag")). v1.4 is very old
(July 2017), not used anymore in-tree and probably not used anymore
outside the tree.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-authored-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e7d16c35ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following CVEs:
CVE-2023-39326: net/http: limit chunked data overhead
CVE-2023-45285: cmd/go: go get may unexpectedly fallback to insecure git
https://go.dev/doc/devel/release#go1.20.12
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If systemd is used we should enable support in mariadb and enable
"Type=notify" in the mysqld.service unit file
"Type=notify" stops systemd from starting services which depend on mariadb
until it has notified systemd that it has finished starting up, this helps
avoid startup race conditions
Signed-off-by: Danny Wood <danny@rotronics.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1a9ad16ed8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream added the possibility to build with system-provided pcre2 back
in 2014:
016bd4fc5f
The policy in Buildroot is to use system-provided libraries rather than
bundled ones, but we missed that opportunity when we introduced mariadb
back in 2016, with commit 2cd86cdbfc (mariadb: new package).
Fix that now.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 15cc8d1e45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit cdc9b8a3a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 12:
task.c: In function 't_start':
task.c:398:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
398 | return ret;
| ^~~
task.c:364:13: note: 'ret' was declared here
364 | int ret;
| ^~~
task.c: In function 't_resume':
task.c:444:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
444 | return ret;
| ^~~
task.c:428:13: note: 'ret' was declared here
428 | int ret;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/bc1b40de22e563b704ad7f20b6bf4d1f73a6ed8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a3db1dd1b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following NLS build failure raised since the addition of the
package in commit 9f4f8c5f89:
/home/buildroot/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: ../../src/common/.libs/libcommon.a(libcommon_la-i18n.o): undefined reference to symbol 'libintl_bindtextdomain'
Fixes:
- http://autobuild.buildroot.org/results/8ab13cf474d732c95a1da65592d950b24b3d474b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f6a7050d71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix CVE-2023-47038 - Write past buffer end via illegal user-defined Unicode property
note: 5.36.2 was a broken release
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bc7b0e1002)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-38703: PJSIP is a free and open source multimedia
communication library written in C with high level API in C, C++, Java,
C#, and Python languages. SRTP is a higher level media transport which
is stacked upon a lower level media transport such as UDP and ICE.
Currently a higher level transport is not synchronized with its lower
level transport that may introduce use-after-free issue. This
vulnerability affects applications that have SRTP capability
(`PJMEDIA_HAS_SRTP` is set) and use underlying media transport other
than UDP. This vulnerability’s impact may range from unexpected
application termination to control flow hijack/memory corruption. The
patch is available as a commit in the master branch.
https://github.com/pjsip/pjproject/security/advisories/GHSA-f76w-fh7c-pc66https://github.com/pjsip/pjproject/releases/tag/2.14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 38c4aa2826)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following wolfssl build failure raised at least since bump to
version 7.4.0 in commit 6b5907bf65:
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c: In function 'ssl_last_error_string':
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c:143:24: error: implicit declaration of function 'ERR_peek_error_line_data'; did you mean 'wolfSSL_ERR_get_error_line_data'? [-Werror=implicit-function-declaration]
143 | ssl_err_code = ERR_peek_error_line_data(&file, &line, &data, &flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| wolfSSL_ERR_get_error_line_data
Fixes:
- http://autobuild.buildroot.org/results/9db9f1dcc6760de4b78771bb79f109c4efd06c36
- http://autobuild.buildroot.org/results/16422af9469de114e552124542508c3b18ea8f19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: don't force wolfssl-all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 67cb7d8d09)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed backported patch:
- bc3f12bfac.patch
Updated ZFS test to pass this new version; drop the explicit /pool
mountpoint option to rely on the default location (which happens to be
/pool already).
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- needed on master to further bump to a data-corruption fix
]
(cherry picked from commit d153e58d13)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a44d1a1252)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-xtables is an unrecognized option since the addition of the
package in commit 490917387a:
a576f4d43e/configure.ac
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --with-xtables
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e81dc9df53)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-45322: libxml2 through 2.11.5 has a use-after-free that can
only occur after a certain memory allocation fails. This occurs in
xmlUnlinkNode in tree.c. NOTE: the vendor's position is "I don't think
these issues are critical enough to warrant a CVE ID ... because an
attacker typically can't control when memory allocations fail."
https://gitlab.gnome.org/GNOME/libxml2/-/blob/v2.11.6/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e5af07dce9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-46852: In Memcached before 1.6.22, a buffer overflow exists
when processing multiget requests in proxy mode, if there are many
spaces after the "get" substring.
Fix CVE-2023-46853: In Memcached before 1.6.22, an off-by-one error
exists when processing proxy requests in proxy mode, if \n is used
instead of \r\n.
https://github.com/memcached/memcached/wiki/ReleaseNotes1622
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bc96e9da0d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-47359: Videolan VLC prior to version 3.0.20 contains an
incorrect offset read that leads to a Heap-Based Buffer Overflow in
function GetPacket() and results in a memory corruption.
Fix CVE-2023-47360: Videolan VLC prior to version 3.0.20 contains an
Integer underflow that leads to an incorrect packet length.
https://code.videolan.org/videolan/vlc/-/blob/3.0.20/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d675873f4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump of webp to version
1.3.2 in commit c88c1d3319:
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/13.2.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: picture.o: undefined reference to symbol 'WebPMemoryWriterClear'
/home/autobuild/autobuild/instance-9/output-1/host/lib/gcc/aarch64_be-buildroot-linux-uclibc/13.2.0/../../../../aarch64_be-buildroot-linux-uclibc/bin/ld: /home/autobuild/autobuild/instance-9/output-1/host/aarch64_be-buildroot-linux-uclibc/sysroot/usr/lib64/libwebp.so.7: error adding symbols: DSO missing from command line
Fixes:
- http://autobuild.buildroot.org/results/9b859a701debeaddf1f9909e16adc6811a620576
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1267a234ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 13fc9dcb34, netsnmp was bumped
from 5.9.3 to 5.9.4 to fix two CVEs.
However, even though it's a minor version bump, there are actually 163
commits upstream between those two minor releases, and some of them
are breaking existing use-cases. In particular upstream
a2cb167514ac0c7e1b04e8f151e0b015501362e0 now requires that config_()
macros in MIB files are terminated with a semicolon, causing a build
breakage with existing MIB files that were totally valid with 5.9.3.
This commit therefore proposes to revert back to 5.9.3, by reverting
those two commits:
56caafceab package/netsnmp: fix musl build
13fc9dcb34 package/netsnmp: security bump to version 5.9.4
and instead backport the one upstream commit that fixes both CVEs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: fix typo as reported by Baruch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 44243b4c80)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git-generated patches embed the short-hash of the objects in the
repository. The length of those short hashes are subject to change
in at least three cases:
- the number of objects in the repository increases, so git increases
the length of short hashes to get a good change there is no
collision;
- the git configuration changes, see core.abbrev in git-config;
- the heuristic to compute the length changes in a newer git version.
Since the bump to zfs 2.1.4 in commit 68dfd09708, the patch generated
by github has changed, causing download failures:
wget --passive-ftp -nd -t 3 -O '/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output' 'bc3f12bfac.patch'
--2023-11-26 16:53:25--
bc3f12bfac.patch
Resolving github.com (github.com)... 140.82.121.3
Connecting to github.com (github.com)|140.82.121.3|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2976 (2.9K) [text/plain]
Saving to: ‘/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output’
/home/ymorin/dev/buildroot/O/ 100%[================================================>] 2.91K --.-KB/s in 0s
2023-11-26 16:53:25 (15.0 MB/s) - ‘/home/ymorin/dev/buildroot/O/master/build/.bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch.uoFq9e/output’ saved [2976/2976]
ERROR: while checking hashes from package/zfs//zfs.hash
ERROR: bc3f12bfac152a0c28951cec92340ba14f9ccee9.patch has wrong sha256 hash:
ERROR: expected: 96a27353fe717ff2c8b95deb8b009c4eb750303c6400e2d8a2582ab1ec12b25a
ERROR: got : 246c80f66abca5a7e0c41cc7c56eec0b4cb7f16b142262480401142bbc2f999f
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
And indeed, the length of short hashes has increased by one since then.
Fix that by bundling the patch, with the short hashes that were known
then, so that it matches the sha256 we had for it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2c3946fcb4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc.mk attempts to disable building the documentation by setting
MAKEINFO=missing, but it is not working. If makeinfo is installed
and recent enough, gcc still uses it. This can be checked easily:
grep BUILD_INFO='info' host-gcc-initial-*/build/gcc/config.log
It happens because the root ./configure script will check
$MAKEINFO --version (aka 'missing --version') and will overwrite it with
MAKEINFO='missing makeinfo' because the version does not match.
Having MAKEINFO='missing makeinfo' is a problem because
'missing makeinfo' will actually attempt to run 'makeinfo' before
failing with an error message. If makeinfo is installed on the host,
then 'missing makeinfo' will successfully run makeinfo anyway.
Many gcc subprojects will check $MAKEINFO --version and enable building
the documentation if it is recent enough. This patch overrides these
checks by forcing gcc_cv_prog_makeinfo_modern=no.
Building the GCC documentation can fail with the wrong makeinfo version.
It happened at least when building GCC 11.3.0 with makeinfo 7.1.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f7b9d3ad2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2022-48303: GNU Tar through 1.34 has a one-byte out-of-bounds read
that results in use of uninitialized memory for a conditional jump.
Exploitation to change the flow of control has not been demonstrated. The
issue occurs in from_header in list.c via a V7 archive in which mtime has
approximately 11 whitespace characters.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add _IGNORE_CVES entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ad0bb50dc7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit d4d483451f.
Tar 1.35 unfortunately changes the behaviour for the devmajor/devminor
fields, breaking the download hash validation. From the release notes:
* Leave the devmajor and devminor fields empty (rather than zero) for
non-special files, as this is more compatible with traditional tar.
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00005.html
So revert the bump for now.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f2b23a6320)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a script to manage the .hash files in the BR2_GLOBAL_PATCH_DIR for
packages using custom versions.
To use it, run in a configured Buildroot directory, E.G.
make foo_defconfig; ./utils/add-custom-hashes
We support multiple patch directories in BR2_GLOBAL_PATCH_DIR. If multiple
directories are specified then use the last one as that is likely to be the
most specific one.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: silence command -v invocation]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4984d0f230)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default dhcpcd installed with 555 permissions as it is
configured in its Makefile.inc. Since 'w' bit is missing,
strip fails and dhcpcd binary installed non-stripped.
On ARM GCC 12 glibc configuration strip saves over 1MB of disk space.
Signed-off-by: Oleg Lyovin <ovlevin@salutedevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 72c3f87efa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, bump package/opencv4-contrib to in lock-step.
This addresses both CVE-2023-2617 and CVE-2023-2618, that have been
fixed in OpenCV 4.8.0.
Signed-off-by: Woodrow Douglass <wdouglass@carnegierobotics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a01490397e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following (Windows only) security issues:
CVE-2023-45283: path/filepath: recognize \??\ as a Root Local Device path prefix.
CVE-2023-45284: path/filepath: recognize device names with trailing spaces and superscripts
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Node modules available on the npm registry, may contain prebuild
binaries for various targets and/or ABIs; for example., there might be
ARM. AArch64, x86_64 binaries for glibc or musl, for Linux or Darwin.
Needless to say, those binaries will most often not match the current
target architecture; as such, check-bin-arch will whine loudly as
reported in #15823:
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv6.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/android-arm/node.napi.armv7.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-arm/node.napi.armv7.node" is "ARM", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-x64/node.napi.glibc.node" is "Advanced Micro Devices X86-64", should be "AArch64"
ERROR: architecture for "/usr/lib/node_modules/node-red-node-serialport/node_modules/@serialport/bindings-cpp/prebuilds/linux-x64/node.napi.musl.node" is "Advanced Micro Devices X86-64", should be "AArch64"
The proper solution would be to remove all those prebuilt binaries, and
request npm to forcefully rebuild the proper binary for the current
architecture; alas, there is no option to tell npm to do so.
Doing it manually would not be easy either, as such modules might be
retrieved as part of the "vendoring" for another module that the user
has requested, and be pretty deep in the dependency chain; trying to fix
this properly would be a nightmare: it would require that we manually
inspect the depednency chain, and install dependent modules one by one,
recursively, re-implementing the same logic npm has when multiple
verions of the same module are installed as part of different branches
of the depenency tree, all while detecting prebuilds and removing them
before installing the mpdule (hence decorrelating download and install,
which is not trivial to do with npm alone).
We also can't simply remove all the prebuilds, because it is not known
whether the location ("<module>/prebuilds/") is standardised, or a
convention with the path noted somewhere in the package metadata, and
how deep they would be in the tree, and whether that could conflict with
arbitrary files...
Instead, we will consider that npm has a sane heuristic to detect
whether it should indeed rebuilt the modules, and that node has a sane
heuristic to know which binary to load at runtime, and we will leave the
prebuilt binaries in place and just exclude them from being checked.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=15823
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cbc5691ab2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when a package is downloaded from a custom location or
version, Buildroot excludes such a package from the mandatory integrity
check with hashes, because it was until now not possible to have such
hashes.
We now have a mechanism which users can leverage to provide additional
hashes, and so custom versions or locations can now be checked too.
Buildroot has no way to know that hashes have indeed been provided for
a custom location/version, and so will still happily ignore an
unchecked package.
However, users who do provide extra hashes most probably do expect that
no download is done without an integrity check, and thus expect that a
missing hash not be ignored.
Add an option that users can select to make Buildroot forcibly require
at least one valid hash, and no invalid hash, for all downloads.
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e091e31831)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we expect and only use hash files that lie within the package
directory, alongside the .mk file. Those hash files are thus bundled
with Buildroot.
This implies that only what's known to Buildroot can ever get into those
hash files. For packages where the version is fixed (or a static
choice), then we can carry hashes for those known versions.
However, we do have a few packages for which the version is a free-form
entry, where the user can provide a custom location and/or version. like
a custom VCS tree and revision, or a custom tarball URL. This means that
Buildroot has no way to be able to cary hashes for such custom versions.
This means that there is no integrity check that what was downloaded is
what was expected. For a sha1 in a git tree, this is a minor issue,
because the sha1 by itself is already a hash of the expected content.
But for custom tarballs URLs, or for a tag in a VCS, there is indeed no
integrity check.
Buildroot can't provide such hashes, but interested users may want to
provide those, and currently there is no (easy) way to do so.
We leverage the existing global-patch-dir mechanism to look for extra
hash files. We use the same heuristic that is used for bundled hash
files, and for each global patch directory <dir>, we use the first file
to exist among:
1. look into <dir>/<package>/<version>/<package>.hash
2. look into <dir>/<package>/<package>.hash
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5d36710e36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we expect and only use hash files that lie within the package
directory, alongside the .mk file. Those hash files are thus bundled
with Buildroot.
This implies that only what's known to Buildroot can ever get into those
hash files. For packages where the version is fixed (or a static
choice), then we can carry hashes for those known versions.
However, we do have a few packages for which the version is a free-form
entry, where the user can provide a custom location and/or version. like
a custom VCS tree and revision, or a custom tarball URL. This means that
Buildroot has no way to be able to cary hashes for such custom versions.
This means that there is no integrity check that what was downloaded is
what was expected. For a sha1 in a git tree, this is a minor issue,
because the sha1 by itself is already a hash of the expected content.
But for custom tarballs URLs, or for a tag in a VCS, there is indeed no
integrity check.
Buildroot can't provide such hashes, but interested users may want to
provide those, and currently there is no (easy) way to do so.
So, we need our download helpers to be able to accept more than one hash
file to lookup for hashes.
Extend the dl-wrapper and the check-hash helpers thusly, and update the
legal-info accordingly.
Note that, to be able to pass more than one hash file, we also need to
re-order the arguments passed to support/download/check-hash, which also
impies some shuffling in the three places it is called:
- 2 in dl-wrapper
- 1 in the legal-info infra
That in turn also requires that the legal-license-file macro args get
re-ordered to have the hash file last; we take the opportunity to also
move the HOST/TARGET arg to be first, like in the other legal-info
macros.
Reported-by: "Martin Zeiser (mzeiser)" <mzeiser@cisco.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f91e89b6e6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f20589cbc7 (configs/stm32mp157c_odyssey: new defconfig) forgot to
specify a fixed TF-A version, so do that now.
When the defconfig was added, the default version was v2.5 - So use that.
Similarly to the other stm32mp1 defconfigs, this needs disabling -Werror
with E=0 to fix a build issue with GCC >= 12.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 69ac9fdbc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1c0c67fc1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5c40f41b2e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 3.2.3 in
commit 4155139365:
In file included from /home/thomas/autobuild/instance-1/output-1/host/include/python3.11/Python.h:38,
from src/modules/rlm_python3/rlm_python3.c:37:
/home/thomas/autobuild/instance-1/output-1/host/include/python3.11/pyport.h:596:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
596 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/36143ab06b66a047aa2247ea66b1df0d6c1cbd66
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fdae1d231c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
timeout = 35 * self.emulator.timeout_multiplier
[...]
self.assertRunOk(cmd, timeout=timeout)
Gets re-multiplied by self.emulator.timeout_multiplier in self.emulator.run().
Drop multiplying the timeout by self.emulator.timeout_multiplier to fix this
issue.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9a81c7a7a4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
to override the current value of 60 seconds
As per a suggestion by Thomas, add a timeout argument to override the current
value of 60 seconds for the emulator.login method.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b1d554b9a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 89f5e98932 (support/download/svn: generate reproducible
svn archives), we've been able to generate reproducible archives, and
thus we have been able to verify the hashes for those archives.
However, the manual was not changed, and still falsely hinted that this
was not the cae.
Fix that.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6898781f03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to using HTTPS for downloading libzlib from zlib.net.
(zlib.net doesn't default to HTTPS but does suggest HTTPS in the permalink
for the latest zlib release. Also works better with some corporate firewalls
that get suspicious about zlib for some reason.)
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5b139e2a8d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-24805: cups-filters contains backends, filters, and other
software required to get the cups printing service working on operating
systems other than macos. If you use the Backend Error Handler (beh) to
create an accessible network printer, this security vulnerability can
cause remote code execution. `beh.c` contains the line `retval =
system(cmdline) >> 8;` which calls the `system` command with the operand
`cmdline`. `cmdline` contains multiple user controlled, unsanitized
values. As a result an attacker with network access to the hosted print
server can exploit this vulnerability to inject system commands which
are executed in the context of the running server. This issue has been
addressed in commit `8f2740357` and is expected to be bundled in the
next release. Users are advised to upgrade when possible and to restrict
access to network printers in the meantime.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 738029bc12)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update also the release url because the OpenPrinting https archive page
is out of sync with the current release archive on the main github
project.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a3c50b7427)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"mschap" and "realm" are already part of default required
raddb modules(DEFAULT_MODULES in raddb/all.mk).
so removed them from disabled module list so that
radiusd.service can start without following errors:
- /etc/raddb/mods-enabled/mschap[11]: Failed to link to module 'rlm_mschap': /usr/lib/rlm_mschap.so
- /etc/raddb/mods-enabled/realm[21]: Failed to link to module 'rlm_realm': /usr/lib/rlm_realm.so
Signed-off-by: Kalpesh Panchal <kalpesh.panchal2@collins.com>
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ce918125e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The description of REFPOLICY_CUSTOM_GIT states:
The custom refpolicy must define the full policy explicitly,
and must be a fork of the original refpolicy, to have the
same build system. When this is selected, only the custom
policy definition are taken into account and all the modules
of the policy are built into the binary policy.
Currently, if a user definess their own policy, a package containing a selinux
directory would add to their custom policy, which is not what they would want.
Disable applying selinux policies in selinux/ directories for custom git
refpolicies.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5f6e608057)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The licensing terms are inherited from the target variant to the host
variant: when the host _LICENSE is empty, then the value of the target
_LICENSE is used.
However, for the golang infra, we want to append a little blurb about
vendored depndencies. If the package is a host-only, then it would
inherit the target _LICENSE, i.e. the variable without the leading
HOST_. If that is defined, this is inherited in the generic-package part
of the infra, but in the golang infra, we saw an empty variable, and so
we would not add the vendoring blurb.
We can't move the condition appending that blurb, after we called into
the generic-package infra, otherwise in that case, we'd have the
opposite issue for packages that are both target and host packages,
where the blurb would be duplicated for host packages...
Instead, we workaround the issue by duplicating the heuristic to inherit
the target value, from the generic- into the golang-package infra.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit aa87875b9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The golang infrastructure automatically expands the list of licenses
with a little blurb that the licenses for vendored dependencies might be
missing in the list.
However, when a package does not define a license, the resulting text is
sub-optimal, resulting in a manifest that contains (with a leading
comma, yes):
, vendored dependencies licenses probably not listed
In that case, pointing out some unkown licensing terms may be part of
unkonwn licensing terms is superfluous.
Instead, just let the legal infra do its job, and report an "unkown"
license altogether.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 01a4614d10)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The licensing terms are inherited from the target variant to the host
variant: when the host _LICENSE is empty, then the value of the target
_LICENSE is used.
However, for the cargo infra, we want to append a little blurb about
vendored depndencies. If the package is a host-only, then it would
inherit the target _LICENSE, i.e. the variable without the leading
HOST_. If that is defined, this is inherited in the generic-package part
of the infra, but in the cargo infra, we saw an empty variable, and so
we would not add the vendoring blurb.
We can't move the condition appending that blurb, after we called into
the generic-package infra, otherwise in that case, we'd have the
opposite issue for packages that are both target and host packages,
where the blurb would be duplicated for host packages...
Instead, we workaround the issue by duplicating the heuristic to inherit
the target value, from the generic- into the cargo-package infra.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 049ea7b389)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cargo infrastructure automatically expands the list of licenses with
a little blurb that the licenses for vendored dependencies might be
missing in the list.
However, when a package does not define a license, the resulting text is
sub-optimal, resulting in a manifest that contains (with a leading
comma, yes):
, vendored dependencies licenses probably not listed
In that case, pointing out some unkown licensing terms may be part of
unkonwn licensing terms is superfluous.
Instead, just let the legal infra do its job, and report an "unkown"
license altogether.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0a8bc54e09)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
websocketpp had some ill-formed usage of template parameters which was
finally removed in C++20. Hence build fails when building with C++20
support enabled.
The patch is already in the develop branch but no new release was
done.
There are no autobuilder failures because websocketpp is a header-only
library, and there are no packages in Buildroot that depned on
websocketpp.
A build issue was encountered when bumping an internal project to
C++20. This issue triggered quite some bug reports in the project [0]
and there are backports to other package managers like vcpkg [1] and
conan [2].
[0] https://github.com/zaphoyd/websocketpp/pull/1060
[1] https://github.com/microsoft/vcpkg/pull/23669
[2] https://github.com/conan-io/conan-center-index/pull/15295
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
[Thomas: extend commit log with details provided by Michael.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9ac1a76fcf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a yet-to-be published security issue TROVE-2023-004. From the
announcement:
https://forum.torproject.org/t/security-release-0-4-7-16-and-0-4-8-8/10064
We are releasing an emergency security release fixing a high security bug
affecting relays.
This is tracked by the TROVE-2023-004 92 for which we’ll make the ticket
public once the packages and network has started to upgrade.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following (Windows-only) security issue:
CVE-2023-46695: Potential denial of service vulnerability in UsernameField
on Windows
The NFKC normalization is slow on Windows. As a consequence,
django.contrib.auth.forms.UsernameField was subject to a potential denial of
service attack via certain inputs with a very large number of Unicode
characters.
In order to avoid the vulnerability, invalid values longer than
UsernameField.max_length are no longer normalized, since they cannot pass
validation anyway.
https://www.djangoproject.com/weblog/2023/nov/01/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
apache uses pkgconfig to find dependencies such as lua, nhgttp2, openssl
and systemd.
For openssl, pkgconfig is used since version 2.1.1 and
0d4387dedc
resulting in the following build failure since at least bump to version
2.4.54 in commit 78e5a9c40e:
ac_cv_path_PKGCONFIG=/usr/bin/pkg-config
[...]
configure:28669: checking for SSL_CTX_new
configure:28669: /home/buildroot/autobuild/instance-1/output-1/host/bin/armeb-buildroot-linux-uclibcgnueabi-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -g0 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/home/buildroot/autobuild/instance-1/output-1/host/armeb-buildroot-linux-uclibcgnueabi/sysroot/usr/bin/../../../../armeb-buildroot-linux-uclibcgnueabi/sysroot/usr/lib -L/usr/lib conftest.c -lssl -lcrypto -lpthread >&5
armeb-buildroot-linux-uclibcgnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
Fixes:
- http://autobuild.buildroot.org/results/d85c86ee1070582014c7b29b39f9a9f356988220
- http://autobuild.buildroot.org/results/55d6bad8572138e200730d3a9f2dd1b9048fd95d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1f6b53b1a4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TF-A prints a version string at boot which includes the version number as
specified in the Makefile and additional "build" information, specified by
the BUILD_STRING parameter:
https://trustedfirmware-a.readthedocs.io/en/v2.9/getting_started/build-options.html
BUILD_STRING: Input string for VERSION_STRING, which allows the TF-A build
to be uniquely identified. Defaults to the current git commit id.
This is implemented as:
# Default build string (git branch and commit)
ifeq (${BUILD_STRING},)
BUILD_STRING := $(shell git describe --always --dirty --tags 2> /dev/null)
endif
https://github.com/ARM-software/arm-trusted-firmware/blob/master/Makefile#L225-L228
Which is never correct in the context of Buildroot, as the TF-A build
directory is never a git repo, and git will move up the directory tree and
possibly and (possibly) pick up the git version of Buildroot instead.
To fix that, explicitly set BUILD_STRING to the version of the package.
Pass it before BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES so it
can still be overridden by the user if needed.
strings images/tf-a-* | egrep '^v2\.'
v2.9(debug):2023.08-859-g99d78b52a0
v2.9(debug):v2.9
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5a8a7530bf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the generic package infrastructure removed auto derivation of
host dependencies [1] (2016.08), the host dependencies must be
explicitly set.
While adding the nettle host variant [2] the gmp dependency was not
duplicated and host-nettle was built without host-gmp (or built with
gmp installed on the build machine).
While building host-gnutls required for building mkeficapsule u-boot
tool, the configure script check if Libhogweed (nettle's companion
library) is build with libgmp support.
If internal toolchain is used, luckily host-gmp is built before
building host-nettle (and host-gnutls). But when using prebuilt
external toolchain, following error shows up :
Libhogweed (nettle's companion library) 3.6 was not found. Note that you must compile nettle with gmp support.
[1] 4bdb067e38
[2] dac6e30118
[3] eb24bfa808
Signed-off-by: Fabien Thomas <fabien.thomas@smile.fr>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit db3a730e8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nettle uses m4 during its build process. Without it, the build fails
with:
m4 ./m4-utils.m4 ./asm.m4 config.m4 machine.m4 aes-decrypt-internal.asm >aes-decrypt-internal.s
/bin/sh: 1: m4: not found
For the target package this is not visible, as the existing gmp
dependency pulls in host-m4. But technically speaking, nettle needs
host-m4 directly, so it makes sense to have this dependency.
For the host package, it clearly fails to build, but probably isn't
very visible as most systems have m4 installed system-wide: this was
noticed when building inside Buildroot's minimal Docker
container. There are no recorded autobuilder failures for this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d4ca1b03c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This maybe the last patch for OpenSSL 1.1.1 LTS, it had reached
end-of-life on 2023-09-11.
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Medium] A fix was added, but still under review for completeness, for a
Bleichenbacher style attack, leading to being able to decrypt a saved
TLS connection and potentially forge a signature after probing with a
large number of trial connections. This issue is around RSA decryption
and affects static RSA cipher suites on the server side, which are not
recommended to be used and are off by default. Static RSA cipher suites
were also removed from the TLS 1.3 protocol and only present in TLS 1.2
and lower. All padding versions of RSA decrypt are affected since the
code under review is outside of the padding processing. Information
about the private keys is NOT compromised in affected code. It's
recommended to disable static RSA cipher suites and update the version
of wolfSSL used if using RSA private decryption alone outside of TLS.
https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.4-stable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c4658ede71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in the C AMQP client library (aka rabbitmq-c)
through 0.13.0 for RabbitMQ. Credentials can only be entered on the
command line (e.g., for amqp-publish or amqp-consume) and are thus
visible to local attackers by listing a process and its arguments.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c3fcaeaaa7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop --without-x (now unrecognized)
- Fix CVE-2023-40745: LibTIFF is vulnerable to an integer overflow. This
flaw allows remote attackers to cause a denial of service (application
crash) or possibly execute an arbitrary code via a crafted tiff image,
which triggers a heap-based buffer overflow.
- Fix CVE-2023-41175: A vulnerability was found in libtiff due to
multiple potential integer overflows in raw2tiff.c. This flaw allows
remote attackers to cause a denial of service or possibly execute an
arbitrary code via a crafted tiff image, which triggers a heap-based
buffer overflow.
https://libtiff.gitlab.io/libtiff/releases/v4.6.0.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e96b1c4b0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
git.code.sf.net is available over HTTPS, so use that for security and
consistency with the other packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 99d525028f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
git.code.sf.net is available over HTTPS, so use that for security and
consistency with the other packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f2a590750f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have HTTPS support for sources.buildroot.net (through Lets
encrypt / Cloudflare), it makes sense to default to it for our backup site.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 05296ced36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MiniZip in zlib through 1.3 has an integer overflow and resultant
heap-based buffer overflow in zipOpenNewFileInZip4_64 via a long
filename, comment, or extra field. NOTE: MiniZip is not a supported part
of the zlib product.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit de7bc4ada2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2023-43665: Denial-of-service possibility in django.utils.text.Truncator
Following the fix for CVE-2019-14232, the regular expressions used in the
implementation of django.utils.text.Truncator’s chars() and words() methods
(with html=True) were revised and improved. However, these regular
expressions still exhibited linear backtracking complexity, so when given a
very long, potentially malformed HTML input, the evaluation would still be
slow, leading to a potential denial of service vulnerability.
The chars() and words() methods are used to implement the truncatechars_html
and truncatewords_html template filters, which were thus also vulnerable.
The input processed by Truncator, when operating in HTML mode, has been
limited to the first five million characters in order to avoid potential
performance and memory issues.
https://www.djangoproject.com/weblog/2023/oct/04/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 21d52e52d8 (package/pkg-utils.mk: break hardlinks in global
{TARGET, HOST}_DIR on per-package build) was recently reverted, so we
are back to a situation where it is possible for packages and post-build
scripts to modify files in-place, and thus impact files in any arbitrary
per-package directory, which may break things on rebuild for example.
21d52e52d8 was too big a hammer, but we can still apply the reasoning
from it, to the aggregation of the final target and host directories.
This solves the case for post-build scripts at least. We leave the case
of inter-package modification aside, as it is a bigger issue that will
need more than just copying files around.
We use --hard-links, so that hard-links in the source (the PPD), are
kept as new hard-links (i.e. "copy" of hard-links) in the destination.
This contributes to limiting the size of target/.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
(cherry picked from commit 23edf9837c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 21d52e52d8 (package/pkg-utils.mk: break hardlinks in global
{TARGET, HOST}_DIR on per-package build) stopped hardlink the source and
destination when rsyncing per-package directory, on the rationale that
modifying files in-place after the rsync would also modify the original
file, and that break foo-rebuild and can cause issues with post-build
scripts.
However, what 21d52e52d8 did not envision, is that copying instead of
hard-linking has two nasty side effects:
- the size increase for the build directory increase with the number
of packages and with the depth of th dependency chains for those
packages: a (relatively small) build that was previously totalling
~13GiB in output/, now totals north of 122GiB, an almost 10-time
increase;
- the build time increases, as it takes more time to read+write files
than it takes to create a new link to a file; the same build saw an
increase of build time from 5min 10s to 7min 30s, a 45% increase.
These regressions are both serious, so revert the change; we'll come up
with a stopgap measure in follow-up commits.
This reverts commit 21d52e52d8.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Herve Codina <herve.codina@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
(cherry picked from commit 8f1487d6fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The relocate-sdk.sh script does not work correctly when
BR2_PER_PACKAGE_DIRECTORIES is enabled. relocate-sdk.sh expects
everything to point at $HOST_DIR, but each package will be pointing at
its $(O)/per-package/*/host.
Use the same command for scrubing host paths during the build, to scrub
to the final host directory location.
Signed-off-by: Brandon Maier <Brandon.Maier@collins.com>
Acked-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 25e60fbe1c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 0c82f3f635 (package/gcc: remove powerpc conditional patching
logic), the macro defining the conditional patch was removed, but it was
still referenced and expanded in the apply-patches hook.
Drop that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 84cdd92f01)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-39325: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and immediately
resets them can cause excessive server resource consumption. While the
total number of requests is bounded to the http2.Server.MaxConcurrentStreams
setting, resetting an in-progress request allows the attacker to create a
new request while the existing one is still executing.
go1.20.10 (released 2023-10-10) includes a security fix to the net/http
package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2022-44792 handle_ipDefaultTTL in agent/mibgroup/ip-mib/ip_scalars.c
in Net-SNMP 5.8 through 5.9.3 has a NULL Pointer Exception bug that can
be used by a remote attacker (who has write access) to cause the
instance to crash via a crafted UDP packet, resulting in Denial of
Service.
CVE-2022-44793 handle_ipv6IpForwarding in
agent/mibgroup/ip-mib/ip_scalars.c in Net-SNMP 5.4.3 through 5.9.3 has a
NULL Pointer Exception bug that can be used by a remote attacker to
cause the instance to crash via a crafted UDP packet, resulting in
Denial of Service.
The pgp key was changed [0] as the old one expired [1].
[0]: 90a6d98aae/
[1]: https://github.com/net-snmp/net-snmp/issues/595
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 868603755c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to a change in util-linux (commit
10f5f79485964ab52272ebe79c3b0047b1f84d82, "libbuid: use
_UL_LIBUUID_UUID_H to cover uuid.h"), gptfdisk no longer detects the
availability of libuuid to generate UUIDs, causing the following
message at runtime:
Warning! Unable to generate a proper UUID! Creating an improper one as a last
resort! Windows 7 may crash if you save this partition table!
This issue exists since util-linux was bumped to version 2.38 in
Buildroot
ee978e853a ("package/util-linux: bump
version to 2.38").
This issue has been fixed in upstream gptfdisk, but the fix [0] is not
yet in a new stable release, so we backport it.
Additionally, now that gptfdisk uses libuuid again, the build fails
because passing LDLIBS to make overrides the default value in the
Makefile. To fix this, this patch adds -luuid to GPTFDISK_LDLIBS.
[0] 6a8416cbd1
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 58fbfe8706)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 369ff9a88f (package/libmodplug: update to git version)
improperly used a short hash as version, so switch to the full-length
hash.
Github use the full-length hash when it creates the top-level directory
of the generated archive, so the hash of the archive does not in fact
change, only its filename. This is perfectly fine fine our handling of
s.b.o.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 80e94c7616)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmodplug calls `cctype` functions, such as `isspace`,
with negative values. This is undefined behaviour.
While glibc allows it, it crashes on uClibc compiled
without `UCLIBC_HAS_CTYPE_SIGNED`.
Adds a patch that resolves the issue.
Also sent upstream. However, the library author has not merged
any pull request for about a year.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[yann.morin.1998@free.fr:
- add Gleb's SoB to the patch
- add upstream URL to the patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 33d0a13c3b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bugfix release which fixes a CVE.
See:
https://www.enlightenment.org/news/2022-09-15-enlightenment-0.25.4
CVE-2022-37706 "enlightenment_sys in Enlightenment before 0.25.4 allows
local users to gain privileges because it is setuid root, and the system
library function mishandles pathnames that begin with a /dev/..
substring."
Hashes were never part of the online news page, therefore mark them as
locally computed.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 83ffe153fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Raise the minimal GCC version to 9.3, which is required since wpewebkit-2.40.0 [1].
Similar to commit 09af6d8bfd,
we do check on >= GCC 9, because we can't check on >= GCC 9.3.
[1] f9c142d9b5
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 603fa625b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make 4.4 introduces a shuffle mode which randomizes prerequisites
in order to better flush out issues with parallel builds. On the other
hand, we use MAKE1 to build packages that are known to be broken with
parallel build. For these, passing the shuffle option would be
counter-productive and lead to spurious build failures.
The --shuffle=none option exists to turn off shuffling again. We can't
add this option unconditionally, however, because Make < 4.4 doesn't
know it. Therefore, conditionally pass --shuffle=none only if there is a
shuffle option in MAKEFLAGS.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit f664d7dc24)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reinstall, rebuild and reconfigure commands rely on the
left-to-right order of evaluation of the dependencies to make sure that
the stamp files are removed before attempting to rebuild. However, this
order of evaluation is not guaranteed. In particular, if top-level
parallel build is enabled, they are executed in parallel and the stamp
file may not have been removed yet when it is evaluated to decide if
rebuild has to be done.
Since make 4.4, it is possible to reproduce this issue by passing
`--shuffle=reverse` to the make commandline.
To solve this, add a .WAIT directive between the clean and
install/build/configure dependencies. .WAIT was introduced in make 4.4
as well. It makes sure that the dependencies on the left are evaluated
before the dependencies on the right - exactly what we want here.
Earlier versions of make don't know about .WAIT, so we need to add a
.PHONY dependency to effectively ignore it.
Note that this doesn't fix the problem for make versions earlier than
4.4. However, the issue isn't really that important: reinstall, rebuild
and reconfigure are development tools, they're not fully reliable to
begin with, and it's anyway less likely that someone uses `make -j` when
doing a reinstall/rebuild/reconfigure.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Reported-by: James Hilliard <james.hilliard1@gmail.com>
(cherry picked from commit 7e3105d5c8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2022-48303: GNU Tar through 1.34 has a one-byte out-of-bounds
read that results in use of uninitialized memory for a conditional
jump. Exploitation to change the flow of control has not been
demonstrated. The issue occurs in from_header in list.c via a V7
archive in which mtime has approximately 11 whitespace characters.
- Update hash of COPYING (http replaced by https)
https://lists.gnu.org/archive/html/info-gnu/2023-07/msg00005.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d4d483451f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building for a target architecture that go does not support, the
installation fails with:
$ make host-go
[...]
ln -sf ../lib/go/bin/go /home/nyma7486/dev/work/5GCroCo/O/pouet/per-package/host-go/host/bin/
ln: failed to create symbolic link '/home/nyma7486/dev/work/5GCroCo/O/pouet/per-package/host-go/host/bin/': No such file or directory
Indeed, the HOST_DIR/bin is not guaranteed to exist when we install a
host package, so it needs to be explicitly created before we can create
entries in there.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Christian Stewart <christian@aperture.us>
Cc: Anisse Astier <anisse@astier.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1db38d9282)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without this patch, a make <pkg>_rebuild detects overwrites. Indeed, in
target_finalize steps some modifications are done on installed files (ie
strip or TARGET_FINALIZE_HOOKS for instance).
In order to avoid these modifications seen from per-package {TARGET,HOST}_DIR
and so been analyzed as some overwrites, global {TARGET,HOST}_DIR is built
using a full copy of the involved per-package files instead of hardlinks.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 21d52e52d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Raise the minimal GCC version to 9.3, which is required since webkitgtk-2.40.0 [1].
Similar to commit ec1ff802df,
we do check on >= GCC 9, because we can't check on >= GCC 9.3.
[1] f9c142d9b5
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit de38484ec3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the S10hyperv SysV init script which expects binaries
to be locate in /sbin while they are installed in /usr/sbin. Please
note, that the systemd init scripts correctly reference them.
Furthermore, the SysV init script did not check for an actual HyperV
environment to be present, which is also corrected. In addition, this
commit also fixes check-package warnings regarding a missing DAEMON
definition.
Signed-off-by: Jens Maus <mail@jens-maus.de>
[Peter: drop from .checkpackageignore]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 14c4bd7bf8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain wrapper automatically adds Position Independent
Execution and stack protector flags in the build process when selected
in the configuration. at91bootstrap being freestanding code, it
doesn't support these, so we have to disable them.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1351222486)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "official" repository we used to reference disapeared quite some
time ago, so in commit 8c25838b53 (package/rockchip-mali: fix build
failure due to missing URL) we switched to using a mirror.
The tarballs generated on the Github side have a top-level directory
that is named "repo-name-HASH", so when we switched to a repository
named "libmali" to one named "mirrors", the content of the generated
tarball changed, even though the content of the files did not.
We can't just change the hash to the new value, or that would conflict
with the copy on s.b.o and older versions of Buildroot.
So, we drop one char from the commit hash, which eans the tarball name
changes, and thus we can calculate a new hash for that tarball, and
there will be no conflict with any existing tarball on s.b.o.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f7f2de3da7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We want to initialize the kernel random number generator as soon as
possible, as early init scripts may also need random numbers (E.G.
syslog-ng in S01syslog-ng does).
Seedrng was presumably only using S20 because the previos urandom script
used S20, which (after som moves) dates all the way back to:
commit 8262508fc4
Author: Eric Andersen <andersen@codepoet.org>
Date: Fri Apr 26 22:01:43 2002 +0000
With this update, everything now works as expected.
-Erik
Seedrng needs persistent storage, but mount -a is run before executing the
init scripts, so S01 should be as good as S20 - Atleast with the scripts in
upstream Buildroot.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 11a46002ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b9bf1c6535 (package/opkg-utils: add opkg-utils as target pkg)
misspelled the macro to install to target, most probably as a bad
copy-paste from the host macro.
Fix that.
Reported-by: Michael Hacker <mh@superbox.one>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8c3c741439)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pciutils is optional, not mandatory since version 2.1 and the addition
of the package in commit 0adc0e24ee and
98ca605e7c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- one item per multi-line in _DEPENDENCIES
- reorder _DEPENDENCIES
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bcfcc07413)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gnu-efi package was enabled on mips64el by commit
11b347c03a ("package/gnu-efi: add
mips64el support"). However, it has been failing to build for a long
time, and nobody bothered fixing it:
gnu-efi-3.0.15//gnuefi/crt0-efi-mips64el.S:71: Error: cannot represent BFD_RELOC_16 relocation in this object file format
Even reverting back to gnu-efi 3.0.10, which was the version used at
the time of 11b347c03a, does not fix the
issue. We tested updating to the latest gnu-efi version, 3.0.17, and
the problem still exists.
Since EFI on MIPS is extremely niche, we don't really want to invest
the time to fix this issue, so let's disable it again. If someone
cares enough, it can be fixed and re-enabled.
Fixes:
http://autobuild.buildroot.net/results/d5938edcf50ebb7fdcec148d73f402845079779d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 13b0e6bbf3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gpsd >= 3.25 raised since commit
3c7fece853:
In file included from src/configuration.h:50,
from src/configuration.c:46:
src/gpsdclient.h:64:8: error: redefinition of 'struct fixsource_t'
64 | struct fixsource_t {
| ^~~~~~~~~~~
In file included from src/gpsdclient.h:49,
from src/configuration.h:50,
from src/configuration.c:46:
/tmp/instance-17/output-1/host/aarch64-buildroot-linux-gnu/sysroot/usr/include/gps.h:2714:8: note: originally defined here
2714 | struct fixsource_t
| ^~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/47a619686bb47debd525c92aa7e14bee5c40ca9e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4c32b3d9ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some extensions of python-mako use python-babel, if they are used,
python-babel must be added as a runtime dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 411a3deb1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some extensions of python-mako use python-pygments, if they are used,
python-pygments must be added as a runtime dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit adb3f5a3e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenBLAS RISC-V 64bit support was added in [1] and was renamed to
"RISCV64_GENERIC" in [2]. Those commits were first included in
OpenBLAS release v0.3.13. This support can now be enabled. With this
commit, we can install the library and packages such as GNU Octave on
RISC-V platforms.
This patch also adjusts the alignment for adding "RISCV64_GENERIC"
in Config.in.
[1] c167a3d6f4
[2] 265ab484c8
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Julien Olivain <ju.o@free.fr>
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c789bcddf0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building go with cgo support needs to build some .c files to generate target
support code, and thus calls the cross C compiler, which is failing when the
toolchain is not built before host-go:
>>> host-go 1.21.1 Building
cd .../build/host-go-1.21.1/src && GO111MODULE=off GOCACHE=.../per-package/host-go/host/share/host-go-cache GOROOT_BOOTSTRAP=.../per-package/host-go/host/lib/go-1.19.11 GOROOT_FINAL=.../per-package/host-go/host/lib/go GOROOT=".../build/host-go-1.21.1" GOBIN=".../build/host-go-1.21.1/bin" GOOS=linux CC=/usr/bin/gcc CXX=/usr/bin/g++ CGO_ENABLED=1 CC_FOR_TARGET=".../per-package/host-go/host/bin/arm-linux-gcc" CXX_FOR_TARGET=".../per-package/host-go/host/bin/arm-linux-g++" GOOS="linux" GOARCH=arm GOARM=6 GO_ASSUME_CROSSCOMPILING=1 ./make.bash
Building Go cmd/dist using .../per-package/host-go/host/lib/go-1.19.11. (go1.19.11 linux/amd64)
go tool dist: cannot invoke C compiler [".../per-package/host-go/host/bin/arm-linux-gcc"]: fork/exec .../per-package/host-go/host/bin/arm-linux-gcc: no such file or directory
Go needs a system C compiler for use with cgo.
To set a C compiler, set CC=the-compiler.
To disable cgo, set CGO_ENABLED=0.
This happens systematically with PPD, and happens without PPD when
host-go is explicitly built (by running: "make host-go").
Since only CGO support needs to compile C files, only add the toolchain
dependency in that case.
When the target is not supported by go, then there is obviously no need
to depend on the toolchain (even if we unconditionally enable cgo
support in only-for-the-host host-go).
Signed-off-by: Christian Stewart <christian@aperture.us>
[yann.morin@orange.com:
- only add the toolchain dependency for target cgo
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Anisse Astier <anisse@astier.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1a44f9242c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-39323: Line directives ("//line") can be used to bypass the
restrictions on "//go:cgo_" directives, allowing blocked linker and compiler
flags to be passed during compilation. This can result in unexpected
execution of arbitrary code when running "go build".
go1.20.9 (released 2023-10-05) includes one security fixes to the cmd/go
package, as well as bug fixes to the go command and the linker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1da113559f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.20.8 (released 2023-09-06) includes two security fixes to the html/template
package, as well as bug fixes to the compiler, the go command, the runtime, and
the crypto/tls, go/types, net/http, and path/filepath packages.
CVE-2023-39318: html/template: improper handling of HTML-like comments within script contexts
CVE-2023-39319: html/template: improper handling of special tags within script contexts
CVE-2023-39321: crypto/tls: panic when processing post-handshake message on QUIC connections
https://go.dev/doc/devel/release#go1.20.0
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2b72f1d167)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.20.7 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler.
Fixes CVE-2023-29409: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server to
expend significant CPU time verifying signatures. Limit this by restricting the
size of RSA keys transmitted during handshakes to <= 8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only three
certificates in circulation with keys larger than this, and all three appear to
be test certificates that are not actively deployed. It is possible there are
larger keys in use in private PKIs, but we target the web PKI, so causing
breakage here in the interests of increasing the default safety of users of
crypto/tls seems reasonable.
https://go.dev/doc/devel/release#go1.20.7
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ee7179497b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While it's not strictly necessary to update go-bootstrap-stage2, we can
continue to update the package to the latest 1.19.x until Go 1.19.x is
discontinued, at which point we can leave it at the final 1.19.x
version.
This package is only used when bootstrapping host-go.
go1.19.11 includes a security fix to the net/http package, as well as
bug fixes to cgo, the cover tool, the go command, the runtime, and the
go/printer package.
https://go.dev/doc/devel/release#go1.19.minor
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit df5fd7dec4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust comments in the Go package to improve clarity:
Config.in.host:
- Add comment mentioning list of supported architectures.
go.mk:
- Reword comment re: copying src/ to host/
- the previously linked issue is not relevant.
- instead: mention that src/ is needed for stdlib.
- Adjust comment re: adjusting file timestamps.
- mention this is needed to avoid rebuilding stdlib
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 651835dbd7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2023-4911: If a tunable of the form NAME=NAME=VAL is passed in the
environment of a setuid program and NAME is valid, it may result in a
buffer overflow, which could be exploited to achieve escalated
privileges. This flaw was introduced in glibc 2.34.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE_2023-5217: Heap buffer overflow in vp8 encoding in libvpx in
Google Chrome prior to 117.0.5938.132 and libvpx 1.13.1 allowed a remote
attacker to potentially exploit heap corruption via a crafted HTML page.
https://www.openwall.com/lists/oss-security/2023/09/28/5
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Peter: extend commit message, add _IGNORE_CVES]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e99999d7cb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2023-35852: In Suricata before 6.0.13 (when there is an
adversary who controls an external source of rules), a dataset
filename, that comes from a rule, may trigger absolute or relative
directory traversal, and lead to write access to a local filesystem.
This is addressed in 6.0.13 by requiring allow-absolute-filenames and
allow-write (in the datasets rules configuration section) if an
installation requires traversal/writing in this situation.
- Fix CVE-2023-35853: In Suricata before 6.0.13, an adversary who
controls an external source of Lua rules may be able to execute Lua
code. This is addressed in 6.0.13 by disabling Lua unless allow-rules
is true in the security lua configuration section.
- Drop first patch (not needed since
c8a3aa608e)
https://github.com/OISF/suricata/blob/suricata-6.0.14/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ce17f93e82)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-38633: A directory traversal problem in the URL decoder of
librsvg before 2.56.3 could be used by local or remote attackers to
disclose files (on the local filesystem outside of the expected area),
as demonstrated by href=".?../../../../../../../../../../etc/passwd" in
an xi:include element.
https://gitlab.gnome.org/GNOME/librsvg/-/blob/2.50.9/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e7988c7060)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The COPYING also contains a BSD-3-Clause license. The BSD-3-Clause
applies to "manual page unifdef.1 and the portability support code in
the FreeBSD subdirectory". The BSD-2-Clause applies to everything else.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d8cea23ce4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2023-4527: If the system is configured in no-aaaa mode via
/etc/resolv.conf, getaddrinfo is called for the AF_UNSPEC address
family, and a DNS response is received over TCP that is larger than
2048 bytes, getaddrinfo may potentially disclose stack contents via
the returned address data, or crash.
CVE-2023-4806: When an NSS plugin only implements the
_gethostbyname2_r and _getcanonname_r callbacks, getaddrinfo could use
memory that was freed during buffer resizing, potentially causing a
crash or read or write to arbitrary memory.
CVE-2023-5156: The fix for CVE-2023-4806 introduced a memory leak when
an application calls getaddrinfo for AF_INET6 with AI_CANONNAME,
AI_ALL and AI_V4MAPPED flags set.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 84c24ab1b5 (package/nodejs: fix parallel build) made use of
BR2_JLEVEL to set the number of jobs nodejs should use instead of using
the number of CPUs (+2).
However, BR2_JLEVEL can be set to 0 by the user, to let Buildroot detect
the number of CPUs (+1), and stores it in PARALLEL_JOBS, and leaves
BR2_JLEVEL untouched, so 0.
Thus, we can end up spawning a build by passing -j0 to ninja, which it
interprets as "no -limit yolo" and does not limit the number oj jobs it
spawns, which usually ends up in an OOM somewhere...
Fix this by using PARALLEL_JOBS.
Reported-by: Cédric & Co
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d574e2a4f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-3341: The code that processes control channel messages sent
to `named` calls certain functions recursively during packet parsing.
Recursion depth is only limited by the maximum accepted packet size;
depending on the environment, this may cause the packet-parsing code to
run out of available stack memory, causing `named` to terminate
unexpectedly. Since each incoming control channel message is fully
parsed before its contents are authenticated, exploiting this flaw does
not require the attacker to hold a valid RNDC key; only network access
to the control channel's configured TCP port is necessary. This issue
affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18,
9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1
through 9.18.18-S1.
https://ftp.isc.org/isc/bind9/9.16.44/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 54f6e1f81f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When nodejs is build, a qemu wrapper script is used to execute some
programs built for the target in user-mode emulation. However, when the
target and build machines are similar (e.g. x86_74), running those
programs fails, with errors such as:
cd ../../tools/v8_gypfiles; python ../../deps/v8/tools/run.py ../../out/Release/v8-qemu-wrapper ../../out/Release/bytecode_builtins_list_generator ../../out/Release/obj.host/gen/generate-bytecode-output-root/builtins-generated/bytecodes-builtins-list.h
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.29' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.32' not found (required by ../../out/Release/bytecode_builtins_list_generator)
../../out/Release/bytecode_builtins_list_generator: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.34' not found (required by ../../out/Release/bytecode_builtins_list_generator)
Return code is 1
So the question is: why the heck does Qemu use the host C library?
To answer this question, we first have to look at how the -L option of
Qemu is implemented. This option is documented as such:
-L path QEMU_LD_PREFIX set the elf interpreter prefix to 'path'
The v8-qemu-wrapper script makes this option point to $(STAGING_DIR),
so that the ELF interpreter used is the one in $(STAGING_DIR).
However, contrary to what the option documentation says, this option
does much more than setting the ELF interpreter prefix: it is going to
affect how *all* system calls manipulating files (open, etc.) are
going to work.
When this option is passed, the function init_paths() in
https://git.qemu.org/?p=qemu.git;a=blob;f=util/path.c is called at
initialization time, and essentially its sets the global "base"
variable to point to the directory passed as -L argument.
Then, for every single syscall that manipulates a path, this path will
be passed through the path() function in the same file. This function
will first attempt to resolve the path with "base" as a prefix, and if
not, return the unprefixed path.
After adding some traces into this function, I was able to understand
what happens:
(1) -L$(STAGING_DIR) is passed, causing "base" to point to
$(STAGING_DIR)
(2) The target ELF interpreter from $(STAGING_DIR) is properly invoked
(3) When this ELF interpreter then resolves the libc.so.6 library, it
first looks for /etc/ld.so.cache.
(4) Qemu first looks for /etc/ld.so.cache with the -L prefix, i.e
$(STAGING_DIR)/etc/ld.so.cache, but it does not exist. So, the Qemu
system call emulation falls back to /etc/ld.so.cache, which means
the target ELF interpreter reads the /etc/ld.so.cache of the host
system.
(5) This /etc/ld.so.cache of the host system says that libc.so.6 is in
/lib/x86_64-linux-gnu/
(6) The target ELF interpreter therefore tries to use
/lib/x86_64-linux-gnu/libc.so.6. The Qemu system call emulation
first tries $(STAGING_DIR)/lib/x86_64-linux-gnu/libc.so.6, but
this library does not exist (it is in
$(STAGING_DIR)/lib/libc.so.6), so the Qemu system call emulation
falls back to /lib/x86_64-linux-gnu/libc.so.6 of the host system,
which exist... but is too old compared to the target C library.
Indeed, results from ld.so.cache take precedence over the simple
resolution of library paths in /usr/lib and /lib.
We see 3 possible ideas to resolve this problem:
(A) Change the behavior of Qemu to not fallback to unprefixed paths:
when -L is passed, all path-related system calls should see the
paths prefixed by the -L option.
Issue with this is that this change is unlikely to get accepted by
Qemu upstream. And there might be some side effects we have not
really identified.
(B) Create an empty $(STAGING_DIR)/etc/ld.so.cache. We have tested
this solution and it works: it gets used instead of the host
/etc/ld.so.cache. Because $(STAGING_DIR)/etc/ld.so.cache is empty,
there's no libc.so.6 match, so the target ELF interpreter goes
through its normal library location resolution logic, which falls
back to trying in /usr/lib and /lib, which works as those paths
ends up being prefixed with $(STAGING_DIR) by Qemu.
(C) Pass LD_LIBRARY_PATH pointing to $(STAGING_DIR)/lib and
$(STAGING_DIR)/usr/lib in the Qemu wrapper. This works because
LD_LIBRARY_PATH paths have precedence over paths given by
ld.so.cache.
This is the solution already used by the GOI qemu wrapper in
package/gobject-introspection/g-ir-scanner-qemuwrapper.in.
We chose to go with the third option, because it has been proven to work
for the GOI wrapper, and has been reported to solve #14366. Even though
the first option would be the best, it is also the one that has the
least chances to land any time soon (if ever); the second has not been
exercised, and the impact is not fully understood either (e.g what about
non-glibc toolchains?).
Fixes: #14366
Signed-off-by: Jens Maus <mail@jens-maus.de>
[yann.morin.1998@free.fr:
- add whole analsys done by Thomas in:
https://lore.kernel.org/buildroot/20221031213926.50d3c778@windsurf/
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 278d1db56b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unless told otherwise, ninja will spawn as many jobs as there are CPU
(plus 2). Nodejs is built with ninja, but it is a generic package, so
there is no variable (like with cmake-package) that passes the proper
number of parallel jobs as configured by the user.
As a consequence, the nodejs build will use as many CPU as are
available, possibly overcommitting the rsources the user expected to be
used.
Set the JOBS variableto limit that number.
Signed-off-by: Jens Maus <mail@jens-maus.de>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 84c24ab1b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes a problem where the NUT package couldn't be
used as a NUT server due to the fact that the default group for
nobody is "nogroup" and not "nobody" like the internal default
of NUT. Thus, when starting a NUT server daemon the daemon starts
with incorrect group permissions. This commit fixes this
shortcoming by introducing a dedicated 'nut' user and 'nut' group
to drop priviledges to it.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cd46e1b143)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes it happens that a Company or a Physical Person sponsors the
creation and/or the upstreaming process of a patch, but at the moment
there is no way to give credits to it. In Linux they prepend '+sponsor'
to the e-mail of the contributor in both authorship and commit log tag as
discussed here[0]. So let's describe in the manual how to do that as a
standard.
[0]: https://lore.kernel.org/linux-doc/20230817220957.41582-1-giulio.benetti@benettiengineering.com/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- reword to reference sub-addressing and the RFC
- move to the "submitting patches" section, that already deals with
SoB tags
- differentiate between Your/Their names
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit de349df08c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The affected code isn't present in any release, see [0].
[0]: https://www.libssh.org/2023/07/14/cve-2023-3603-potential-null-dereference-in-libsshs-sftp-server/
The CPE entry for this CVE is
cpe:2.3:a:libssh:libssh:-:*:*:*:*:*:*:*
We interpret the "-" as matching any version. It actually means
"unspecified version", which is the cop-out in case there is nothing
useful to match. We can't really make our infrastructure ignore "-"
entirely, because for all we know our version is an unreleased commit
sha which _is_ vulnerable. Thus, the only way out is an exclusion which
we'll never be able to remove.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit a34a370f4e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Per default, the fio package uses the "-march=native" GCC option. This
is of course wildly inappropriate for cross-compilation and can result
in illegal instructions. Thus we make sure fio will not use that
compiler option by passing --disable-native to configure.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 056958724b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit 4e365d1768 "package/tcl: bump to version 8.6.13" did NOT
refreshed the package patch, because the patch was still applying
correctly and the package was working as expected.
It was refreshed in the previous bump, in commit 9cf314745a
"package/tcl: bump to version 8.6.12". This was part of 2022.02.
Looking closer at the patch content, the -/+ lines are exactly the
same. So this patch does not change anything. Since the file was kept
and the commit log mention a patch refresh, the intent was more
likely to carry over the old patch (which was declaring all libc
functions as "unbroken".
This commit actually refreshes this patch. It was regenerated with
git format-patch. Since the patch is renamed due to git format-patch,
the .checkpackageignore is updated accordingly.
Note:
This ancient patch will be removed soon, as an upstream commit [1],
not yet in a release, cleaned up and removed those old parts.
[1] 04d66a2571
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ec8a9cc518)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As off 2022-11-22 CVE-2022-39377 is listed as affecting sysstat
< 2.16.1 instead of < 2.17.1. The text is not updated, but the CPE info
is.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 6425e0b848)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The install to staging commands of the ne10 package are careful to
install the shared libraries only if they are built, but we forgot to
use the same care for the install to target commands, causing a build
failure on BR2_STATIC_LIBS=y configurations as no shared library was
built:
cp: cannot stat '/home/autobuild/autobuild/instance-15/output-1/build/ne10-1.2.1/modules/libNE10*.so*': No such file or directory
This commit fixes this by guarding the target installation commands to
BR2_STATIC_LIBS being empty.
The problem exists since the package was introduced in commit
318f3db0dc ("ne10: new package"), a good
10 years ago. Most likely it was not seen for many years as this
package is only available for ARM with NEON and AArch64, and we were
not testing fully static builds, except for ARMv5 that don't have
NEON. Now that we are doing more random testing, the problem started
being visible.
Fixes:
http://autobuild.buildroot.net/results/45b2c1af052271bc2f1bb96544f138d29e4f7dfd/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0b764a7d1e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As off 2021-05-17 NVD added 1.19 as the first version that isn't
affected by CVE-2007-4476.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 487c12a1f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2022-45061 affects python <= 3.7.15, 3.8.0 through 3.8.15,
3.9.0 through 3.9.15, 3.10.0 through 3.10.8
The mentioned patch was removed in c38de813 when bumping to 3.11.1.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 43dbfe4670)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2021-32749 affects fail2ban <= 0.9.7, 0.10.0 through 0.10.6, and
0.11.0 through 0.11.2.
The mentioned patch was removed in 76853089 when bumping to 1.0.1.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a01a6b8dc8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failures raised since bump to version 1.4.0 in
commit 456a739831:
-- Found PythonInterp: /usr/bin/python3.6 (found suitable version "3.6.9", minimum required is "3.6")
CMake Error at /home/buildroot/autobuild/run/instance-3/output-1/host/sparc64-buildroot-linux-gnu/sysroot/usr/share/cmake/pybind11/FindPythonLibsNew.cmake:147 (message):
Python config failure:
Traceback (most recent call last):
File "<string>", line 6, in <module>
ImportError: cannot import name 'sysconfig'
and
In file included from /home/buildroot/autobuild/instance-1/output-1/host/include/python3.11/Python.h:38,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/common.h:266,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/attr.h:13,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/detail/class.h:12,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/pybind11.h:13,
from /home/buildroot/autobuild/instance-1/output-1/host/sh4-buildroot-linux-gnu/sysroot/usr/include/pybind11/numpy.h:12,
from /home/buildroot/autobuild/instance-1/output-1/build/zxing-cpp-2.1.0/wrappers/python/zxing.cpp:18:
/home/buildroot/autobuild/instance-1/output-1/host/include/python3.11/pyport.h:601:2: error: #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
601 | #error "LONG_BIT definition appears wrong for platform (bad gcc/glibc config?)."
| ^~~~~
Fixes:
- http://autobuild.buildroot.org/results/665b246a4bb14480152ee59050672a7469148a5b
- http://autobuild.buildroot.org/results/0502b05020de57e4910125c699c4264047187c51
- http://autobuild.buildroot.org/results/c5e7fe83d46c704e05800e3ae62bf476458c7b71
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 38f39a6031)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since bump of snmppp
to version 3.5.0 in commit e011fa0415:
configure: error: Cannot find suitable libsnmp++ library
[...]
configure:9496: checking if libsnmp++ can be linked with flags from pkg-config
configure:9528: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/arm-none-linux-gnueabi-g++ -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g0 -D_FORTIFY_SOURCE=1 -pthread -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -D_XOPEN_SOURCE=XPG6 conftest.cpp -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../arm-buildroot-linux-gnueabi/sysroot/usr/lib -lsnmp++ >&5
In file included from /home/buildroot/autobuild/run/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/snmp_pp/snmp_pp.h:71:0,
from conftest.cpp:92:
/home/buildroot/autobuild/run/instance-1/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/snmp_pp/uxsnmp.h:628:35: error: 'nullptr' was not declared in this scope
CSNMPMessage *snmp_message = nullptr);
^
Fixes:
- http://autobuild.buildroot.org/results/f272473e7b588f5390b183072935a0217290ee4e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7c6c018ad4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patches (already in version) and so autoreconf
- Update COPYING hash (gpl mailing address updated with
9bd45cc06e6a5997fbd6)
- Fix CVE-2022-43634: This vulnerability allows remote attackers to
execute arbitrary code on affected installations of Netatalk.
Authentication is not required to exploit this vulnerability. The
specific flaw exists within the dsi_writeinit function. The issue
results from the lack of proper validation of the length of
user-supplied data prior to copying it to a fixed-length heap-based
buffer. An attacker can leverage this vulnerability to execute code in
the context of root. Was ZDI-CAN-17646.
- Fix CVE-2022-45188: Netatalk through 3.1.13 has an afp_getappl
heap-based buffer overflow resulting in code execution via a crafted
.appl file. This provides remote root access on some platforms such as
FreeBSD (used for TrueNAS).
- Fix CVE-2023-42464: Validate data type in dalloc_value_for_key()
https://github.com/Netatalk/netatalk/blob/netatalk-3-1-17/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d170cde027)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A vulnerability was found in OpenSC. This security flaw cause a buffer
overrun vulnerability in pkcs15 cardos_have_verifyrc_package. The
attacker can supply a smart card package with malformed ASN1 context.
The cardos_have_verifyrc_package function scans the ASN1 buffer for 2
tags, where remaining length is wrongly caculated due to moved starting
pointer. This leads to possible heap-based buffer oob read. In cases
where ASAN is enabled while compiling this causes a crash. Further info
leak or more damage is possible.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9c4c3c4c9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2023-40359: xterm before 380 supports ReGIS reporting for
character-set names even if they have unexpected characters (i.e.,
neither alphanumeric nor underscore), aka a pointer/overflow issue.
This can only occur for xterm installations that are configured at
compile time to use a certain experimental feature.
- Update COPYING hash (update in year and version)
https://invisible-island.net/xterm/xterm.log.html#xterm_384
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 164d635f37)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As of 2021-05-14 CVE-2017-3139 is no longer listed as affecting bind, only RHEL.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8bf82aab0c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2023-36664: Artifex Ghostscript through 10.01.2 mishandles
permission validation for pipe devices (with the %pipe% prefix or the |
pipe character prefix).
- Fix CVE-2023-38559: A buffer overflow flaw was found in
base/gdevdevn.c:1973 in devn_pcx_write_rle() in ghostscript. This
issue may allow a local attacker to cause a denial of service via
outputting a crafted PDF file for a DEVN device with gs.
- Fix CVE-2023-38560: An integer overflow flaw was found in
pcl/pl/plfont.c:418 in pl_glyph_name in ghostscript. This issue may
allow a local attacker to cause a denial of service via transforming a
crafted PCL file to PDF format.
https://ghostscript.readthedocs.io/en/gs10.02.0/News.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 93ef6997ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 3341ceb1e5 (package/gdb: zlib is mandatory, not optional), zlib
has become a mandatory dependencies of the gdb package.
However, zlib is only needed for the debugger, gdb itself, while the
server, gdbserver, does not use it.
This means that, when building an SDK to be later reused as an external
toolchain, the zlib headers and libraries are present in the sysroot of
the toolchain, tainting the toolchain and making it unsuitable to be
reused.
As Julien noticed, for example, tcl will try and link with zlib if
available, and at build time it is. But at runtime, it is not, and thus
tclsh fails to run; see 7af8dee3a8 (package/tcl: add mandatory
dependency to zlib)
When we only need to build gdbserver, we still need to configure and
build the whole gdb distribution, which means we call the top-level
configure script; that script has no option to disable the detection
of zlib: it wants to either use a system one, or it will build the
bundled one.
So, when we only build gdbserver, we tell configure to not use a system
zlib. This triggers the build of the bundled one, but it is not linked
with gdbserver so in the end it is not used on the target.
Reported-by: Julien Olivain <ju.o@free.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 8ce33fed49)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tcl changed its zlib handling in upstream commit [1]. Before this
commit, the HAVE_ZLIB macro was defined only if a zlib headers/library
was found. After that commit, the HAVE_ZLIB macro is unconditionally
defined. The only change is that: if a working zlib library is found
in the toolchain sysroot, it is used. Otherwise, the package will use
a shipped version in [2]. See also [3] and [4].
This tcl commit is included in Buildroot since commit 7fda943b43
"tcl: bump to version 8.6.1".
In Buildroot, we prefer to not use bundled libraries wherever possible,
so add an unconditional dependency to zlib.
Further notes:
This behavior leads to runtime failures, when the package is compiled
with toolchains including zlib in their sysroot. This is because at
configuration time, the package will detect zlib in the sysroot and
link against it, but the library files won't be installed on target.
This happen to be the case with Bootlin toolchains such as [5], as they
also contaions gdbserver, and since 3341ceb1e5 (package/gdb: zlib is
mandatory, not optional), we also build zlib even if only gdbserver is
built (gdbserver does not use zlib, so that's a bug in our gdb
packaging).
This toolchain also happen to be the one used in basic configurations
of the runtime test infrastructure (this issue was found while
attempting to write a runtime test for tcl).
In such cases, running "tclsh" command fails with error message:
tclsh: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
libtcl library also miss its dependency.
ldd /usr/lib/libtcl8.6.so
libz.so.1 => not found
libm.so.6 => /lib/libm.so.6 (0xb6dad000)
libc.so.6 => /lib/libc.so.6 (0xb6c65000)
/lib/ld-linux.so.3 (0xb6f6c000)
[1] 6f3dea45ce
[2] https://github.com/tcltk/tcl/tree/core-8-6-13/compat/zlib
[3] https://github.com/tcltk/tcl/blob/core-8-6-13/unix/configure.in#L172
[4] https://github.com/tcltk/tcl/blob/core-8-6-13/unix/Makefile.in#L240
[5] https://toolchains.bootlin.com/downloads/releases/toolchains/armv5-eabi/tarballs/armv5-eabi--glibc--stable-2023.08-1.tar.bz2
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7af8dee3a8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-40225: HAProxy through 2.0.32, 2.1.x and 2.2.x through
2.2.30, 2.3.x and 2.4.x through 2.4.23, 2.5.x and 2.6.x before 2.6.15,
2.7.x before 2.7.10, and 2.8.x before 2.8.2 forwards empty
Content-Length headers, violating RFC 9110 section 8.6. In uncommon
cases, an HTTP/1 server behind HAProxy may interpret the payload as an
extra request.
https://www.mail-archive.com/haproxy@formilux.org/msg43864.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8fc24fbd17)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A flaw was found in LibRaw. A heap-buffer-overflow in raw2image_ex()
caused by a maliciously crafted file may lead to an application crash.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bc4110b073)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2023-38039: HTTP headers eat all memory
When curl retrieves an HTTP response, it stores the incoming headers so that
they can be accessed later via the libcurl headers API.
However, curl did not have a limit on the size or quantity of headers it
would accept in a response, allowing a malicious server to stream an endless
series of headers to a client and eventually cause curl to run out of heap
memory.
https://curl.se/docs/CVE-2023-38039.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 56b0667406)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt 2.2.12 was released on September 9, 2023. This is a bug-fix
release, fixing two crash bugs. One is possible by viewing a crafted
message header, so upgrading is strongly recommended.
Fix CVE-2023-4874: Null pointer dereference when viewing a specially
crafted email in Mutt >1.5.2 <2.2.12
Fix CVE-2023-4875: Null pointer dereference when composing from a
specially crafted draft message in Mutt >1.5.2 <2.2.12
http://www.mutt.org/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e2deaf0467)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Does not install systemd unit if nodm or xdm is enabled.
Signed-off-by: Yanghao Cheng <yanghao.cheng@aioi-atg.com>
[yann.morin.1998@free.fr:
- don't use $(or ...)
- slightly reword comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6898ca03a2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xdm package also installs a init script that utimately starts X server
Signed-off-by: Yanghao Cheng <yanghao.cheng@aioi-atg.com>
[yann.morin.1998@free.fr:
- don't use $(or ...)
- slightly reword comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f9cd154467)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libjxl was failing to build for riscv targets, since commit ff7c37e57
"package/libjxl: security bump to version 0.8.1". Build was failing with
output:
/build/libjxl-0.8.1/lib/jxl/enc_xyb.cc: In function 'jxl::Image3F jxl::N_SCALAR::TransformToLinearRGB(const jxl::Image3F&, const jxl::ColorEncoding&, float, const JxlCmsInterface&, jxl::ThreadPool*)':
/build/libjxl-0.8.1/lib/jxl/enc_xyb.cc:223:21: error: variable 'std::atomic<bool> ok' has initializer but incomplete type
223 | std::atomic<bool> ok{true};
| ^~
This build failure was due to a missing <atomic> header inclusion. For
some reason, the build failure was observed only with RISC-V toolchains.
This commit fixes the issue by adding an upstream commit, not yet in a
package release. See [1].
Fixes:
http://autobuild.buildroot.org/results/121/12107bc7aea7afae1d2fb935d31b44eee6ea1501
[1] 22d12d74e7
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit de45aea47b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in lldpd before 1.0.17. By crafting a CDP PDU
packet with specific CDP_TLV_ADDRESSES TLVs, a malicious actor can
remotely force the lldpd daemon to perform an out-of-bounds read on heap
memory. This occurs in cdp_decode in daemon/protocols/cdp.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3557a7b599)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The quoting around the expansion of ${relative_dir} was indeed incorrect
since it was introduced back in 8fe9894f65 (suport/download: fix git
wrapper with submodules on older git versions): it is in fact already
quoted as part of the whole sed expression.
${GIT} can contain more than one item, but we don't care about splitting
on spaces when we just print it for debug, so we can just quote it
rather than add an exception.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bcee3ca6d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit b7efb43e86 (download/git: try to recover from
utterly-broken repositories), we catch errors through an ERR
trap, so we can try and recover from a broken repository. In
that commit, we switched from using "set -e" to "set -E", so
that trap is inherited in functions, command substitutions,
and subshells.
However, the trap is not defined until we have parsed the
options, created the cache directory, and eventually chdir()ed
into it. Athough improbable, it is possible for the git helper
to fail in any of those steps, and that would not get caught.
Fix that
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit daa341cb9b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we generate the taballs off a local working copy of a VCS tree,
the umask is the one that we enforce in out top-level Makefile.
However, it is possible that a user manually tinkers in said working
copy (e.g. to check an upstream bug fix, or regression). If the user
umask is different from the one Buildroot enfirces, such tinkering
can impact the mode bits of the files, even if their content is not
modified.
When we eventually need to create a tarball from said working copy,
the VCS (e.g. git) will only be interested in checking whether the
content of the files have changed before chcking them out, and will
not look at, and restore/fix the mode bits.
As a consequence, we may create non-reproducible archives.
We fix that by enforcing the mode bits on the files before we create
the tarball: we disable the write and execute bits, and only set the
execute bit if the user execute bit is set.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 768f9f80f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a patch only removes files, it is ignored. Meaning, that the
registered developer isn't automatically picked up when calling
get-developer.
Fix this by also checking if the line starts with ---, as a patch
removing a file has a line starting with --- with the name of the
removed file and one started with +++ /dev/null.
A set is used to store the changed files, which doesn't allow
duplicates. Therefore normal patches aren't affected by this change.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7bc5ea80c7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.19.13 (released 2023-09-06) includes a couple of bug fixes. In
particular it fixes a bug introduced with the update to v1.19.11 which
broke http using a unix socket addressing.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bugfix release only containing the fix to a potential integer underflow
which got assigned CVE-2023-36328.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b7488b4d68)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.1.9 is affected by CVE-2023-36053, and 4.1.10 was released to fix
it. The changes between 4.1.9 and 4.1.10 are just:
f9a14b8f0668029fb7e0aebcae57b60dcec4a529 (tag: 4.1.10) [4.1.x] Bumped version for 4.1.10 release.
beb3f3d55940d9aa7198bf9d424ab74e873aec3d [4.1.x] Fixed CVE-2023-36053 -- Prevented potential ReDoS in EmailValidator and URLValidator.
3b48fe413f91612fb8c43fe9d489860d10c84bf7 [4.1.x] Added stub release notes for 4.1.10 and 3.2.20.
0e5948b8df5d25deb48a505cbf16f010d9dc603c [4.1.x] Fixed MultipleFileFieldTest.test_file_multiple_validation() test if Pillow isn't installed.
66e1e9b006618ba00e804d18bd90d3a9e94801b3 [4.1.x] Added CVE-2023-31047 to security archive.
d1385cc51b142b05b21b721d9d68fc461bc7241f [4.1.x] Post-release version bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2397349fa9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates poppler to the latest version in the 22.x series,
with only has bug fixes. Here is the list of commits between 22.10.0
and 22.12.0:
df568263c51950ceed6f1fb42f80e99a2614c275 (tag: poppler-22.12.0) poppler 22.12.0
198dc1d0674c0a462668e6868c35b1ee0e731005 Form::addFontToDefaultResources: Be stubborn in finding a font we can use
a5952ab70716a2d4f792a943c2dcf3068f1d6885 Revert "CI: Fix Debian brokenness"
8fcaa7c622d24761a9ecb3922f95d072077d6f34 CI: Fix Debian brokenness
cc665f757af6b87dd245d36e079dd44d8d2d2182 (tag: poppler-22.11.0) poppler 22.11.0
a296982e1d5b4968b2bd044d80647ae6f9267526 Do not include a poppler/ file from a splash/ header
bc4a0d9a2abfcd75d9b0ee4be3f7600905fe6001 Form: Provide Unicode marker when ensuring fonts
111f38a722eedddd94faa52dda8c5e0da561fb41 Cairo: Update font after restore
907d05a6a141284aee22fbd16ab0a2fb4e0f2724 Fix crash in file that wants to do huge transparency group
e53f5aae3bce7d09788f2ad62be998895fb9807b PSOutputDev::setupResources: Fix stack overflow in malformed doc
a4ca3a96a6b1f65b335a1ea362e6c202e46ae055 topIdx can't be negative
e471f8e09bf2e38df0cf5df1acecbcca70685573 Init all the fields of JPXStreamPrivate
5190c0d4369bd9f501922585140be4ec736e24f2 No need to store smaskInData in priv
6263bb90b09326103b10e4c4edfbc5b84c884921 Page label ranges can't start in < 0
Note: this version bump does not include the fix for CVE-2023-34872,
so we still need the backported patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f3ab33c62f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when verifying the configuration of a uClibc toolchain for
the presence of locale support, we check __UCLIBC_HAS_LOCALE__. It
turns out that we in fact also expect __UCLIBC_HAS_XLOCALE__ to be
defined, as without it locale_t is not defined, causing build failure
in some packages, such as libcpprestsdk:
In file included from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/include/cpprest/json.h:18,
from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/src/pch/stdafx.h:88,
from /home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/src/http/client/http_client_msg.cpp:13:
/home/thomas/autobuild/instance-0/output-1/build/libcpprestsdk-2.10.18/Release/include/cpprest/asyncrt_utils.h:317:13: error: 'locale_t' does not name a type
317 | typedef locale_t xplat_locale;
| ^~~~~~~~
As essentially our requirement for uClibc in external toolchains is
"it should match the uClibc configuration used by Buildroot for
internal toolchains", it makes sense to verify
__UCLIBC_HAS_XLOCALE__. Note that of course checking
__UCLIBC_HAS_XLOCALE__ is sufficient, as it cannot be enabled if
__UCLIBC_HAS_LOCALE isn't.
This addresses an issue with the Synopsys ARC external toolchain,
which is built with __UCLIBC_HAS_LOCALE__, but without
__UCLIBC_HAS_XLOCALE__ causing a build failure with some
packages (such as libcpprestsdk).
Therefore, this patch also changes how the Synospys ARC external
toolchain is exposed in Buildroot: it no longer advertise locale
support.
Fixes:
http://autobuild.buildroot.org/results/e6778e60cc1ea455f5b4511d5824f04d8040f67b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3c8d890c19)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2023-31038 affects log4cxx only if ODBC is supported. While
CVE-2023-31038 has been fixed in newer versions of log4cxx, there is
quite a huge gap to do a version bump, and the commit that fixes
CVE-2023-31038 could not be identified.
Therefore, we want to rely on the fact that our log4cxx package does
not support ODBC: there is indeed no explicit dependency on our
unixodbc package in log4cxx.mk. However, log4cxx automatically detects
if ODBC is available and if it is, it uses it.
So what we do in this commit is backport an upstream commit, which
adds explicitly options to enable/disable ODBC and ESMTP support, and
we use them to (1) always disable ODBC and (2) explicitly
enable/disable ESMTP support.
Thanks to ODBC being disabled, we're not affected by CVE-2023-31038.
Of course, there is a potential regression for users who were relying
on the implicit unixodbc dependency, but as we could not identify the
commit fixing the CVE-2023-31038, this is the best we can do at the
moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit cf686670b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CVE-2004-2771 is already fixed by the Debian patch
0014-globname-Invoke-wordexp-with-WRDE_NOCMD.patch. The Debian patch
description is:
Subject: [PATCH 4/4] globname: Invoke wordexp with WRDE_NOCMD (CVE-2004-2771)
See also https://marc.info/?l=oss-security&m=141875285203183&w=2 for
more details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 829610c701)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit
15972770cf ("package/heirloom-mailx:
security bump to version 12.5-5 from Debian"), we added CVE-2014-7844
in HEIRLOOM_MAILX_IGNORE_CVES, but with the wrong comment about it: it
is a different patch in the Debian stack of patches that fixes
it. Indeed the description of patch
0011-outof-Introduce-expandaddr-flag.patch is:
=====================================================================
Subject: [PATCH 1/4] outof: Introduce expandaddr flag
Document that address expansion is disabled unless the expandaddr
binary option is set.
This has been assigned CVE-2014-7844 for BSD mailx, but it is not
a vulnerability in Heirloom mailx because this feature was documented.
=====================================================================
See also https://marc.info/?l=oss-security&m=141875285203183&w=2 for
details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 94716fdb48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub 2.06 is affected by a number of CVEs, which have been fixed in
the master branch of Grub, but are not yet part of any release (there
is a 2.12-rc1 release, but nothing else between 2.06 and 2.12-rc1).
So this patch backports the relevant fixes for CVE-2022-28736,
CVE-2022-28735, CVE-2021-3695, CVE-2021-3696, CVE-2021-3697,
CVE-2022-28733, CVE-2022-28734, CVE-2022-2601 and CVE-2022-3775.
It should be noted that CVE-2021-3695, CVE-2021-3696, CVE-2021-3697
are not reported as affecting Grub by our CVE matching logic because
the NVD database uses an incorrect CPE ID in those CVEs: it uses
"grub" as the product instead of "grub2" like all other CVEs for
grub. This issue has been reported to the NVD maintainers.
This requires backporting a lot of patches, but jumping from 2.06 to
2.12-rc1 implies getting 592 commits, which is quite a lot.
All Grub test cases are working fine:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/984500585https://gitlab.com/tpetazzoni/buildroot/-/pipelines/984500679
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: fix check-package warning in patch 0002]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 65c99394ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pcm-tools package contains a version.h with git attributes:
$ cat version.h
#define PCM_VERSION " ($Format:%ci ID=%h$)"
$ man 5 gitattributes
Creating an archive
export-subst
If the attribute export-subst is set for a file then Git
will expand several placeholders when adding this file to
an archive. The expansion depends on the availability of
a commit ID, i.e., if git-archive(1) has been given a tree
instead of a commit or a tag then no replacement will be
done. The placeholders are the same as those for the option
--pretty=format: of git-log(1), except that they need to be
wrapped like this: $Format:PLACEHOLDERS$ in the file. E.g.
the string $Format:%H$ will be replaced by the commit hash.
So, the archive generated by github has changed since we updated
pcm-tools in 2021-12-08 with commit d1d93d488c (package/pcm-tools:
bump to version 202110). The downlad was still OK in 2022-01-04 [0]
but has been failing at least since 202-08-25 [1].
Since the archive is generated on the github side, there is not much we
can do to fix this up.
We switch over to using git to do the download, and we generate the
archive localy, which we know is reproducible.
We fix the version.h so that it contains the same string as the backup
tarball we host on s.b.o.
There are three other files in pcm-tools that have git attributes, to
exclude them from the generated archive, all pertaining to CI/CD stuff:
.cirrus.yml export-ignore
.gitlab-ci.yml export-ignore
.travis.yml export-ignore
We don't remove them, because they have no impact on the build, and they
are anyway already present in the archive by the time we could act on it
anyway...
[0] http://autobuild.buildroot.org/results/127/1276a3d49c8848039f034e7f03632df365097e94/
[1] http://autobuild.buildroot.org/results/8bb/8bbf9c36af332bbf5e7c1abcbb594a0b231ef97e/
Reported-by: Woody Douglass <wdouglass@carnegierobotics.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 60f50a5e34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each time a new pipeline is triggered, some jobs may fail due to
temporary issue with a Gitlab runner (network, power supply, docker or
maintainance).
Most of the problems are "runner system failure" [1] and require to
retart each failed jobs manually by maintainers to complete the
pipeline with only real failures if any.
The "retry" keyword allows to configure how many times a job is retried
if it fails. "retry:when" allows to retry a failed job only on
specific failure types like "runner_system_failure".
While at it, retry a job if it failed due to a timeout failure (this
timeout means that the job was pending for more than 24h) [2].
Such timeout failures occur on pipelines testing each Buildroot's
defconfig since there is not enough gitlab runner available to build
all of them within 24h.
Retry only jobs that are more likely to wait for a runner
(generate-gitlab-ci-yml, runtime_test_base, defconfig_base and test_pkg).
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949397 (runner system failure)
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/4936949530 (timeout failure or the job got stuck)
https://docs.gitlab.com/ee/ci/yaml/#retrywhen
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e0166ecba0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release, fixing a number of regressions in 2.0.16
From the changelog
(https://github.com/eclipse/mosquitto/blob/master/ChangeLog.txt)
2.0.17 - 2023-08-22
===================
Broker:
- Fix `max_queued_messages 0` stopping clients from receiving messages.
Closes#2879.
- Fix `max_inflight_messages` not being set correctly. Closes#2876.
Apps:
- Fix `mosquitto_passwd -U` backup file creation. Closes#2873.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c11950fe4a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0a8ef2f3f7 bumped the headers
version requirements, but did not update the associated comment.
Remove the comment entirely, as it does not apply anymore.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bdaade3e34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 30997eaa65438a2ce726ad8a204ac5a36363f5c8 a mistake
was made. Guard the definition correctly.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3f46db39e6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2023-20197: A vulnerability in the filesystem image parser for
Hierarchical File System Plus (HFS+) of ClamAV could allow an
unauthenticated, remote attacker to cause a denial of service (DoS)
condition on an affected device. This vulnerability is due to an
incorrect check for completion when a file is decompressed, which may
result in a loop condition that could cause the affected software to stop
responding.
For details, see the announcement:
https://blog.clamav.net/2023/07/2023-08-16-releases.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2023-34241 (see [0] for details)
[0] https://github.com/OpenPrinting/cups/releases/tag/v2.4.6
The number of changes between 2.4.4 and 2.4.6 is really small, and
limited to bug fixes:
9d614a4b3184205294c55355a1d2eb54d4532ccd (tag: v2.4.6) Update CHANGES.md
6f6da74ec284e28c156f0b9f62f3bd610e61aa78 Fix use-after-free in cupsdAcceptClient() (fixes CVE-2023-34241)
3f12185ca9cbb5350a6370d6046066907b8abc12 Merge pull request #735 from AtariDreams/Fixer
f5281777c80cdf820a2a71c9e7f08b91f0e11160 Fix compilation on older macOS versions
ee82c5b18409def3ec1424ce2eb343aabb0ff0d1 Merge pull request #730 from zdohnal/cupssinglefile_24x
1504527b2415a4b67b0e3e17593b053f3628746f cups/ppd-cache.c: Put cupsSingleFile into generated PPD
3be1d5da8fe9ee13aab5ee6ecc11b2f9387821a6 Prepare files for next release
c1f54ec966ccc5d5564eed95dcb540842af7b5ca (tag: v2.4.5) cups/cups.h: Update for 2.4.5
70dba05b7511a96476ea0ef8fe1d92c6500c6e61 Finish hotfix release 2.4.5
87f5cb7d8f0da8fa2835bb0aa3ca48b5e5a66a3f Merge pull request #727 from AtariDreams/hotfix
61aa0b259183fe59124566f08ecf649bb806cd24 Regression: Certificate data is corrupted during base64 conversion
7362f41c45d834564f876ffac536f59eece843ec Prepare files for next release
Signed-off-by: Clement Ramirez <ramirez.clement3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit db46428e0a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the follow-up commit to the 4de60e4 which disables
sourcehighlight dependency for the target GDB package.
Do the same for the host variant to be sure that this
won't be picked up from the host system.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9ba399a3dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nftables provides python bindings; it uses setuptools to install them.
We currently install those bindings by telling the nftables buildsystem,
autotools, to install the python bindings.
However, we do not pass any of the environment variables that are needed
for setuptools packages. When host-python-setuptools is installed before
nftables is built [0], this breaks the system at runtime, as the
bindings are not installed; only the egg is, resulting in runtime errors
like:
# python -c 'import nftables'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ModuleNotFoundError: No module named 'nftables'
Upstream has been doing some changes on their python handling, but it is
not in a released version yet, and we can't backport those changes
either, due to other big changes.
Instead, we split the pyhon bindings to their own package.
For legacy handling, we make that new package default to y, so that
existing (def)config still work. The only novelty is that it can be
disabled now.
Many thanks to Julien for testing and finding the offending dependency,
to James for suggesting the package split, and to Adam for, well,
trigerring the issue in the first place! ;-p
Note: a git bisect of the issue turns up 72 candidates for the breakage,
all around the time we dropped python2 support in early 2022; the last
known-good commit is 55df30f8b1 (package/zfs: drop python2 support)
and the first known-bad commit is 697acda00d (package/pkg-python: drop
python2 host/setuptools support); everything in-between does not
configure (package/python/Config.in.host still sourced but already
removed), or does not build (host-python still in the dependency chain
but already removed), so had to be skipped during the bisect.
[0] This can happen when another python package using setuptools is
built before nftables. However, with PPD, this never happens because
host-python-setuptools is never in the dependency chain of nftables.
Reported-by: Julien Olivain <ju.o@free.fr>
Tested-by: Julien Olivain <ju.o@free.fr>
Suggested-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit eb74998125)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-28366: Fix memory leak in broker when clients send multiple QoS 2
messages with the same message ID, but then never respond to the PUBREC
commands.
- CVE-2023-0809: Fix excessive memory being allocated based on malicious
initial packets that are not CONNECT packets.
- CVE-2023-3592: Fix memory leak when clients send v5 CONNECT packets with a
will message that contains invalid property types.
- Broker will now reject Will messages that attempt to publish to $CONTROL/.
- Broker now validates usernames provided in a TLS certificate or TLS-PSK
identity are valid UTF-8.
- Fix potential crash when loading invalid persistence file.
- Library will no longer allow single level wildcard certificates, e.g. *.com
For more details, see the changelog:
https://mosquitto.org/ChangeLog.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9f1ca943d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compiler-rt project intructs to build out of tree:
https://compiler-rt.llvm.org/
Otherwise, the dependency chain declared in the include/CMakelLists.txt
causes a circular dependency of source files upon themselves:
make[4]: Circular include/sanitizer/allocator_interface.h <- include/sanitizer/allocator_interface.h dependency dropped.
make[4]: Circular include/sanitizer/asan_interface.h <- include/sanitizer/asan_interface.h dependency dropped.
make[4]: Circular include/sanitizer/common_interface_defs.h <- include/sanitizer/common_interface_defs.h dependency dropped.
[--snip 19 other files--]
This is because include/CMakeLists.txt unconctional declares
dependencies in this manner:
set(SANITIZER_HEADERS
sanitizer/allocator_interface.h
sanitizer/asan_interface.h
sanitizer/common_interface_defs.h
[...]
)
set(COMPILER_RT_HEADERS
${SANITIZER_HEADERS}
[...])
set(output_dir ${COMPILER_RT_OUTPUT_DIR}/include)
foreach( f ${COMPILER_RT_HEADERS} )
set( src ${CMAKE_CURRENT_SOURCE_DIR}/${f} )
set( dst ${output_dir}/${f} )
add_custom_command(OUTPUT ${dst}
[...]
)
[...]
endforeach( f )
The froeach() loop creates dependency rules between the files in
output_dir and CMAKE_CURRENT_SOURCE_DIR, without provision for the
case they are both the same directories, thus in-source builds are
not supported.
With the Makefiles backend, this only triggers the above warning
from make, because make arbitrarily breaks circluar dependencies, and
in this case it makes it work. But when we switch to the ninja backend,
this is going to be a hard error.
Anyway, ninja or make, compiler-rt does not support in-source builds.
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
[yann.morin.1998@free.fr: drastically expand commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit dedb686dd2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since it was introduced in commit d4ecefa3cc (package/perftest: new
package), perftest was missing the reverse dependency on the kernel
headers version inherited from rdma-core.
In commit 3279d8b9c4 (package/rdma-core: needs NPTL), the dependency
of rdma-core on NTPL was not propagated to its reverse dependencies,
notably perftests.
Fixes:
- http://autobuild.buildroot.net/results/00c/00ce19a1589c6028ee77c333ed9107e2c8c8d6de
- d4ecefa3cc
- 3279d8b9c4
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[yann.morin.1998@free.fr:
- also add misisng headers dependency
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 00cb5f5e4a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency is not provided by Buildroot, and it can potentially be
found by gdb's build system from the host system, which results in the
following build errors:
../../gdb/source-cache.c:37:10: fatal error: srchilite/sourcehighlight.h: No such file or directory
37 | #include <srchilite/sourcehighlight.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [Makefile:1645: source-cache.o] Error 1
make[4]: *** Waiting for unfinished jobs....
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4de60e41c3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
screenfetch requires an "awk" implementation, but upstream would
only use an executable called "awk": pick up upstream patch that
can autodetect awk implementation, so that "mawk" can be used.
Signed-off-by: Nicolas Boichat <drinkcat@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ff6d6c79d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, the Python build system was building a _dbm.cpython-*.so
native module when BR2_PACKAGE_PYTHON3_BERKELEYDB was enabled, but
since the bump of Python to 3.11.x, it was no longer building this
native module.
Investigation this, we found out that Python 3.11 changed how libdb
was detected [1] and that check now fails:
quoting configure log:
checking for libdb... no
quoting python config.log:
conftest.c:(.text.startup+0x8): undefined reference to `__db_ndbm_open'
However, in fact it turns that this problem is not new in Python
3.11. In Python 3.10, the build system was always producing the native
module, but it was in fact not working at runtime:
>>> from _dbm import *
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /usr/lib/python3.10/lib-dynload/_dbm.cpython-310-arm-linux-gnueabihf.so: undefined symbol: __db_ndbm_delete
It was not really visible because when one does "import dbm", it
actually tries several "backends", including ndbm (which relies on
_dbm above), and if it doesn't work, it falls back silently on a pure
Python implementation.
So the issue was never noticed, but has already been there,
potentially forever.
In order for this _dbm native module to be built (Python >= 3.11) or
to work (Python < 3.11), the BerkeleyDB library need to be built with
its so-called "dbm" interface, which we do by selecting select
BR2_PACKAGE_BERKELEYDB_DBM.
And now:
>>> import _dbm
>>>
[1] d2340ef257/configure.ac (L4002)
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
[Thomas: did more research to have a better explanation of what is
happening, and realize the problem is not related to Python 3.11]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b84ffd85e2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Berkeley DB support in python depends on dbm, when missing python fails
to detect libdb:
d2340ef257/configure.ac (L4002)
quoting python configure log:
checking for libdb... no
quoting python config.log:
conftest.c:(.text.startup+0x8): undefined reference to `__db_ndbm_open'
This patch provides a configure option for the historic dbm interface
to be used by the python package.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 244a8c52ef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpd's Config.in selects expat and/or yajl depending on which
sub-options is enabled, and adds build dependencies, but does not pass
-D<option>=enabled/disabled for both of these features, relying on
auto-detection.
This commit fixes that by explicitly enabling/disabling expat and yajl
depending on their presence. The mpd sub-options no longer need to
have these as build-time dependencies, as it is handled globally.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[Thomas: extracted from
https://patchwork.ozlabs.org/project/buildroot/patch/20221005091032.3014-5-br015@umbiko.net/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3693462a1f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like BR2_PACKAGE_MPD_UPNP_PUPNP needs expat and curl support,
BR2_PACKAGE_MPD_UPNP_NPUPNP also needs expat and curl. curl was
already selected, but not expat. It didn't cause any visible issue, as
BR2_PACKAGE_MPD_UPNP_NPUPNP selects BR2_PACKAGE_LIBNPUPNP, which
itself select BR2_PACKAGE_EXPAT. But as mpd directly checks for the
availability of expat, it makes sense to also select it directly.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[Thomas: extracted from a larger patch at
https://patchwork.ozlabs.org/project/buildroot/patch/20221005091032.3014-5-br015@umbiko.net/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6cdb48a048)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
id3tag is a sub-feature that is needed to extract information from mp3 files.
It selects the corresponding library and handles config settings. Two other
features need this sub-feature, but handle all library selections themselves
and omit enabling the id3tag feature. In consequence, users have to remember
to select both mp3 library and id3tag, otherwise the mpd executable will not
process mp3 files.
Reflect feature dependency in mpd Config.in to make id3tag selection automatic.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 876a365ea2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 54b9008d48 ("package/mpd: bump
to version 0.21.11"), mpd was migrated from using the autotools build
system to the meson build system.
As part of this, the BR2_PACKAGE_MPD_TCP was incorrectly modified,
leading BR2_PACKAGE_MPD_TCP disabled to actually enable TCP, and
BR2_PACKAGE_MPD_TCP enabled to not explicitly enable TCP support.
This commit fixes that by handling this option in the common way.
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit be08ba3569)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The less package currently installs only the "less" binary, rather
than running the default "make install" behavior from the autotools
build system.
However, at least another binary, "lessecho" is needed for the "s"
command in less to work properly: so in that sense this commit is
fixing a broken behavior.
Since the less installation only installs 3 programs, "less",
"lessopen" and "lesskey", there is no good reason to not use the
default installation command, which we do in this commit.
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
[Thomas: rework commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8b1bc64d92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit 319c56dfe3 bumped
stellarium which included these commits
b3f02beaec5d5edd0e5f
It downloads external packages during the build:
$ find output/build/stellarium-23.2/ -iname *.tar.*
output/build/stellarium-23.2/_deps/eigen3-subbuild/eigen3-populate-prefix/src/eigen-3.4.0.tar.bz2
output/build/stellarium-23.2/_deps/showmysky-qt5-subbuild/showmysky-qt5-populate-prefix/src/v0.3.1.tar.gz
which breaks offline builds.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2616272339)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit 319c56dfe3 bumped
stellarium which included this commit
186b06fa21
It removed the previously bundled QXlsx source and lets stellarium
git-clone the sourcecode of the QXlsx package (not present in buildroot)
during the build:
$ find output/build/stellarium-23.2/ -iname .gitignore | grep qxl
output/build/stellarium-23.2/_deps/qxlsxqt5-src/.gitignore
which breaks offline builds.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b032b3b1df)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot commit 319c56dfe3 bumped
stellarium which included this commit
186b06fa21
It removed the previously bundled libindi source and lets stellarium
download the sourcecode of the indiclient package (not present in
buildroot) during the build:
$ find output/build/stellarium-23.2/ -iname *.zip
output/build/stellarium-23.2/_deps/indiclient-subbuild/indiclient-populate-prefix/src/v1.8.5.zip
which breaks offline builds.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c2a450ddd6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2023-28882: Trustwave ModSecurity 3.0.5 through 3.0.8 before 3.0.9 allows
a denial of service (worker crash and unresponsiveness) because some inputs
cause a segfault in the Transaction class for some configurations.
https://security-tracker.debian.org/tracker/CVE-2023-28882
- Drop 0003-Revert-Fix-maxminddb-link-on-FreeBSD.patch, handling of libmaxminddb
was fixed upstream in d2b700d
- Drop 0004-build-pcre.m4-fix-build-without-pcre.patch, handling of PCRE was
fixed upstream in 791964a
Signed-off-by: Frank Vanbever <frank.vanbever@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a1e0e7276c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no such thing as a BR2_TARGET_GENERIC_TTY_PATH variable. The
comment here should mention BR2_TARGET_GENERIC_GETTY_PORT instead.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e0ff6ad7ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.19.12 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler.
Fixes CVE-2023-29409: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server to
expend significant CPU time verifying signatures. Limit this by restricting the
size of RSA keys transmitted during handshakes to <= 8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only three
certificates in circulation with keys larger than this, and all three appear to
be test certificates that are not actively deployed. It is possible there are
larger keys in use in private PKIs, but we target the web PKI, so causing
breakage here in the interests of increasing the default safety of users of
crypto/tls seems reasonable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit [1], the testsuite build is unconditionally disabled
although we have the option BR2_PACKAGE_XENOMAI_TESTSUITE to
install Xenomai testsuite on the target.
Handle --disable-testsuite option with BR2_PACKAGE_XENOMAI_TESTSUITE.
[1] 74196b7d05
Signed-off-by: Pierre Ficheux <pierre.ficheux@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bc9a8ef111)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0001-cmake-Check-USE_BUNDLED_DEPS-before-getting-nlohmann.patch
should have been deleted as part of Buildroot commit
08792a60df ("package/sysdig: bump to
version 0.29.3"). Indeed, this patch was merged upstream as commit
114436c1a45142ef73acfc2607fbc6572782160f between 0.29.2 and 0.29.3.
This fixes the following build failure:
Applying 0001-cmake-Check-USE_BUNDLED_DEPS-before-getting-nlohmann.patch using patch:
patching file cmake/modules/nlohmann-json.cmake
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file cmake/modules/nlohmann-json.cmake.rej
There are no autobuilder failures, probably because getting to build
sysdig requires so many special conditions that it never triggered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e434d8a29f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9079079092 (utils/docker-run: fix support for git-worktrees)
got last-minute changes when it was applied, and the case when the
current working directory is not the top of the current working copy
got broken.
Fix that by duplicating (and thus reinstating) the 'cd MAIN_DIR' to
match what is done when retrieving the git-common-dir.
Fixes: 9079079092
Reported-by: Brandon Maier <Brandon.Maier@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5b559109ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cmocka package checks if a toolchain supports the
-fstack-clash-protection compiler flag, and if it does automatically
uses it. That flag is not supported by GCC for Thumb1 builds (at least
as of both GCC 11 and GCC 12). Let's tell cmocka about this by passing
-DWITH_STACK_CLASH_PROTECTION=OFF in this configuration, as suggested
by Arnout Vandecappelle.
Fixes:
http://autobuild.buildroot.net/results/4044b3a71d3130d934c7a7c0c5badfabb2a97030/
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: change the initial patch from Joel to use the suggestion from
Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5622c76bf4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Current versions of sam-ba are 64bit only.
objdump -p $(HOST_DIR)/bin/sam-ba
$(HOST_DIR)/bin/sam-ba: file format elf64-x86-64
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 71b5ea4030)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bind package exhibits gcc bug 101737 when built for the SH4
architecture with optimization enabled, which causes a build failure.
As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_101737=y.
To achieve this we need to correct the override of CFLAGS by using:
BIND_CONF_OPTS += CFLAGS="$(BIND_CFLAGS)"
instead of:
BIND_CONF_ENV = BUILD_CFLAGS"$(BIND_CFLAGS)"
since the latter doesn't work as expected and doesn't override CFLAGS.
Fixes:
http://autobuild.buildroot.net/results/e7b/e7b9a4cbee8bb16431609182b96d1ac1ccec10e7/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 105e3b34be)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The docker-run script attempts to support git-new-workdirs and
git-worktrees by resolving the symlink at '$GIT_DIR/config' to get the
true $GIT_DIR. However this does not work for git-worktrees as they do
not use symlinks, instead they change the $GIT_DIR into a regular file
that contains the path to the real $GIT_DIR. To complicate things
further, we actually want the $GIT_COMMON_DIR which is the superset of a
worktree's $GIT_DIR.
git-rev-parse supports the '--git-common-dir' which will resolve the
$GIT_COMMON_DIR for us. However it does not work for git-new-workdirs,
so we still need to detect and handle them.
'--git-common-dir' also appeared only with git 2.10.0, released in 2016,
so it will not be available in older "enterprise-grade" distributions.
In that case, 'git rev-parse --git-common-dir' would return the option
flag '--git-common-dir' as-is, which is incorrect. So, we instruct it to
never return flags.
'--git-common-dir' also returns just '.git' for the main working copy,
but 'docker run' want an absolute path, so we canonicalise it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
[yann.morin.1998@free.fr:
- support git versions before --git-common-dir was introduced
- don't mount GIT_DIR if unknown (i.e. not needed)
- fix expanding MAIN_DIR
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9079079092)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure:
/tmp/ccqcLrVb.s:4053: Error: selected processor does not support `umlal r2,r1,r0,r3' in Thumb mode
/tmp/ccqcLrVb.s:4076: Error: selected processor does not support `umlal r0,r3,r1,r2' in Thumb mode
/tmp/ccqcLrVb.s:8644: Error: selected processor does not support `umlal r0,r3,r2,r4' in Thumb mode
Fixes:
http://autobuild.buildroot.net/results/1d09a0a58cbc1712416de746d57d4532df580673/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 73ddf7bf50)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The seatd service was changed to use the "seat" group in version 0.6.0:
5535c2c3b1
In buildroot we updated seatd past version 0.6.0 in commit:
c54f85ca0d
However we forgot to fix the group name when doing so.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 50a8d8330b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building a fip firmware (BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y), the
TF-A build recipe starts by building the host program fiptool with the
proper build environment variables. Then the main TF-A target firmware
build step takes place, with the expectation that the fiptool program will
be used under the hood if necessary.
In TF-A, the build recipe for the host program fiptool has subtly changed
after v2.7, in commit cf2dd17ddda2 ("refactor(security): add OpenSSL 1.x
compatibility"). This change has the effect to force re-linking fiptool
each time.
If we try to build with Buildroot a fip firmware with a TF-A version after
v2.7 comprising the aforementioned change, the fiptool program is forcibly
re-linked during the main firmware build step. This happens without the
proper build environment variables and consequently, if openssl is not
installed on the host, the libcrypto shared library will not be found by
the linker and the link will fail with the following error:
/usr/bin/ld: cannot find -lcrypto: No such file or directory
A patch has been integrated into TF-A to avoid re-linking fiptool when not
necessary, which should solve the problem starting with version v2.10. Add
that patch in Buildroot for versions v2.8 and v2.9, to repair the build in
the cases described above.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4664845767
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Dick Olsson <hi@senzilla.io>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr:
- don't use symlink in v2.9, just copy patch
- fix numbering in v2.8 which now has two patches
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f3597910cf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fragments provided by toolchains.bootlin.com were incorrectly
flagging toolchains as not having OpenMP support while they had it
[0]. This has been fixed in toolchains.bootlin.com, so a run of
gen-bootlin-toolchains has allowed to adjust the toolchain definitions
in Buildroot, leading to this commit.
OpenMP support needs to be flagged so the proper libraries get copied
into the resultant filesystem to avoid missing dependencies [1].
[0]: https://github.com/bootlin/toolchains-builder/issues/60
[1]: https://bugs.busybox.net/show_bug.cgi?id=15634
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 746ac56850)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since upstream Linux commit 6898e60f709b0047206110d3ec9f4612210e3ff7
("perf build: If libtraceevent isn't present error the build") present
in Linux 6.4 and newer, Linux will fail to build if libtraceevent is not
present. Since we do not currently have support for libtracevent in
buildroot, pass NO_LIBTRACEVENT=1 to get perf to build again.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b4ab45a5c1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, module libraries have a suffix based on cpython version + host
architecture: this is fine for a native compile when these libraries are used on
the same computer (or similar computers). But when target architecture is not
the same python is unable to find libraries due to the wrong suffix and produces
unclear errors messages:
# python3
Python 3.11.3 (main, Jun 19 2023, 14:15:44) [GCC 11.4.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from gnuradio import blocks
Traceback (most recent call last):
File "/home/xxx/buildroot/output/build/gnuradio-3.10.4.0/gr-blocks/python/blocks/__init__.py", line 18, in <module>
ModuleNotFoundError: No module named 'gnuradio.blocks.blocks_python'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/xxx/buildroot/output/build/gnuradio-3.10.4.0/gr-blocks/python/blocks/__init__.py", line 22, in <module>
ModuleNotFoundError: No module named 'gnuradio.blocks.blocks_python'
>>>
By adding _PYTHON_SYSCONFIGDATA_NAME="$(PKG_PYTHON_SYSCONFIGDATA_NAME)" at configure time, sysconfig will
return correct informations (target architecture) instead of host architecture.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e22b450692)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patches which were applied upstream, rebased remaining patches.
Added patch 0004 to avoid dependency to perl package JSON:PP.
This bump depends on bumping heimdal, see previous patch of this series.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- make new patch git-formatted
- add upstream status to new patch
- update .checkpackageignore wth removed patches
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 55ceaef8f6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Samba-4.16 bumped its internal heimdal code[1] which made it
incompatible with asn1_compile built with heimdal-7.7.1:
/home/user/buildroot/output/build/samba4-4.18.2/third_party/heimdal/lib/asn1/rfc2459.asn1:260: Ignoring char(_)
/home/user/buildroot/output/build/samba4-4.18.2/third_party/heimdal/lib/asn1/rfc2459.asn1:260: syntax error
Bump this package to the same version LibreELEC is using
1dc0b5bf3e1112a18795763eddbab1
to fix the build error.
Removed HOST_HEIMDAL_MAKE_SYMLINK as asn1_compile is now installed in
$(HOST_DIR)/bin/.
[1] https://www.samba.org/samba/history/samba-4.16.0.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8e33cc012e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the commit [1] already fixed some runtime issue with
uClibc toolchain, the same test TestPythonPy3Iptables fail
with Glibc toolchain.
xtables_version = 12
if xtables_version:
_searchlib = "libxtables.so.%s" % (xtables_version,)
else:
_searchlib = "xtables"
_lib_xtables, xtables_version = find_library(_searchlib)
_lib_xtables and xtables_version are null with glibc
The implementation of find_library() rely on the custom
_find_library() that try to use the IPTABLES_LIBDIR
environment variable (that does not exist in the context
of Buildroot).
Within the scope of buildroot we can determine what
IPTABLES_LIBDIR should be at build time and replace the
calls to os.environ.get('IPTABLES_LIBDIR', None) with
the correct value.
[1] d341ec0350
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bbf3454f8f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.19.11 (released 2023-07-11) includes a security fix to the net/http package,
as well as bug fixes to cgo, the cover tool, the go command, the runtime, and
the go/printer package.
CVE-2023-29406 and Go issue https://go.dev/issue/60374
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fc957ece11)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure:
/tmp/ccw5V2Ti.s: Assembler messages:
/tmp/ccw5V2Ti.s:2013: Error: selected processor does not support `itt gt' in Thumb mode
/tmp/ccw5V2Ti.s:2014: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2015: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2017: Error: selected processor does not support `it le' in Thumb mode
/tmp/ccw5V2Ti.s:2018: Error: Thumb does not support conditional execution
/tmp/ccw5V2Ti.s:2020: Error: selected processor does not support `it gt' in Thumb mode
/tmp/ccw5V2Ti.s:2021: Error: Thumb does not support conditional execution
Fixes:
http://autobuild.buildroot.net/results/3fc/3fc68f756cf1661673941c411c4a2477e901e361/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c8cc28b5ce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build the am335x-bonegreen-wireless.dtb device tree.
The genimage script which is shared between beaglebone and
beaglebone_qt5 was updated to support the bonegreen-wireless.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit adc566856e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removal requested via email:
could you somehow please remove me as maintainer from this package.
I am since many years not using builtroot anymore and have no longer
systems with which I could do patch requests.
I am going into retirement.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 10dbb664e5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot always enable largefile support in the toolchain, and thus
the associated definitions are always on. This leads to a problem in
unzip that on a 32-bit arch with these flags being passed in
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
but the LARGE_FILE_SUPPORT define not being set will cause a size
mismatch on the comparison of the zipfiles:
$ unzip test.zip
Archive: test.zip
error: invalid zip file with overlapped components (possible zip bomb)
The simple solution is just enable LARGE_FILE_SUPPORT to enable large
file support. In order to avoid redefinition warnings, we undefine
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 168e5848ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There was some imx SDMA firmware in the base linux-firmware package at
one time, but the firmware-imx is updated with the latest versions
from NXP releases.
This just ensures a dependency is set so that the firmware-imx package
will always come later in case an overlap occurs again.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Reviewed-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 70ff5377f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most rpi defconfigs use dtb overlays, but not rpi0 / rpi2 - Making it harder
to use overlays on those boards as the genimage files have to be tweaked.
To fix this, create the rpi-firmware/overlays directory in the post-build
script if needed and unconditionally include it in the genimage files so
rpi0/rpi2 works consistently with the other variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6021f3678b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 0e82c360942907f5a2f379e64e0d211aaff80774 (and since release
2.10.1), a new variable called PYBIND11_PYTHONLIBS_OVERWRITE was introduced
and set to ON by default.
According to comment before this option:
"Overwrite cached values read from Python library (classic search). Turn off if
cross-compiling and manually setting these values."
In buildroot's context this option must be disabled to keep variables
provided by buildroot and lib/app.
Fixes:
- http://autobuild.buildroot.net/results/7423df5db5237d94bb49e32698828d4fe470e39b/
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 11aa7ac8fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes uboot build errors:
In file included from tools/imagetool.h:24,
from tools/aisimage.c:7:
include/image.h:1383:12: fatal error: openssl/evp.h: No such file or directory
1383 | # include <openssl/evp.h>
|
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7ee2bd48f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d6c/d6caf3c2c0fd670e70950d3e89629df39f8ce596/
After adding various fixes for the autobuilder error and subsequent
build errors this build error can only be fixed by using gcc >= 7:
output/build/assimp-5.2.5/code/AssetLib/Obj/ObjFileParser.cpp:55:23:
fatal error: string_view: No such file or directory
Usage of string_view was added in version 5.2.5 by upstream commit
f6bcb160d0
which was added to buildroot by commit
7d843d9cc0
Removed BR2_TOOLCHAIN_HAS_GCC_BUG_64735 which is only valid for gcc < 7
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6dad3a709c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-1916: A flaw was found in tiffcrop, a program distributed by the
libtiff package. A specially crafted tiff file can lead to an
out-of-bounds read in the extractImageSection function in
tools/tiffcrop.c, resulting in a denial of service and limited information
disclosure. This issue affects libtiff versions 4.x.
- CVE-2023-25434: libtiff 4.5.0 is vulnerable to Buffer Overflow via
extractContigSamplesBytes() at /libtiff/tools/tiffcrop.c:3215.
- CVE-2023-26965: loadImage() in tools/tiffcrop.c in LibTIFF through 4.5.0
has a heap-based use after free via a crafted TIFF image
Drop the now upstream
0001-tiffcrop-Correct-simple-copy-paste-error-Fix-488.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit cb496970c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The alsa-utils will remove and create the /usr/share/alsa dir
as a whole and since the alsa plugins needs to add config into
this same directory it should come after those install steps.
Also, the bluez alsa needs the plugins installed to find them
during the configuration phases - so, interlock the plugins
when configured.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 3223a34ee5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-34969: Fix an assertion failure in dbus-daemon when a privileged
Monitoring connection (dbus-monitor, busctl monitor, gdbus monitor or
similar) is active, and a message from the bus driver cannot be delivered
to a client connection due to <deny> rules or outgoing message quota.
This is a denial of service if triggered maliciously by a local attacker.
- Fix an incorrect assertion that could be used to crash dbus-daemon or
other users of DBusServer prior to authentication, if libdbus was compiled
with assertions enabled.
For details, see the NEWS file:
https://gitlab.freedesktop.org/dbus/dbus/blob/dbus-1.12/NEWS
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 52ae2a4e1d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
E-mails are bouncing:
<jose.pekkarinen@unikie.com>: host ASPMX.L.GOOGLE.com[74.125.133.26] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5206492d6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2023-32067: High. 0-byte UDP payload causes Denial of Service
- CVE-2023-31147 Moderate. Insufficient randomness in generation of DNS
query IDs
- CVE-2023-31130. Moderate. Buffer Underwrite in ares_inet_net_pton()
- CVE-2023-31124. Low. AutoTools does not set CARES_RANDOM_FILE during
cross compilation
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0afcfe5a48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autoconf-build system fails to properly detect vsnprintf
checking for vsnprintf... yes
checking whether vsnprintf is C99 compliant... no
which leads to a build error
snprintf.c:495:1: error: inlining failed in call to 'always_inline'
'rpl_vsnprintf.localalias': function not inlinable
Building with cmake fixes the problem:
-- Looking for vsnprintf
-- Looking for vsnprintf - found
The cmake build system has an option to disable checkmk, so we don't
need to remove it from target anymore.
Fixes:
http://autobuild.buildroot.net/results/e55/e5562513226de902dae642526165b1555a540144/
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 6dfc789f4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hwdata provides a .pc file, which other packages can look up to find the
location where hwdata files are, and use them at build time.
This is the case for the upcoming libdisplay-info package, which
requires the hwdata's PNP IDs at build time.
However, installing the .pc file is not enough. Indeed, meson (which
libdisplay-info uses) will look for the corresponding data files in
datadir, which it locates relative to the sysroot, which is our staging.
So, we also need to install the hwdata files in staging.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f36c57728a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2022-41751: Jhead 3.06.0.1 allows attackers to execute arbitrary OS
commands by placing them in a JPEG filename and then using the
regeneration -rgt50 option.
Update readme.txt hash after a minor tweak of the text:
a0eed69daa
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 39ffadd6ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebased two patches.
Changelog:
https://docs.python.org/release/3.11.4/whatsnew/changelog.html#python-3-11-4
Fixes the following security problems:
- gh-99889: Fixed a security in flaw in uu.decode() that could allow for
directory traversal based on the input if no out_file was specified.
- gh-104049: Do not expose the local on-disk location in directory
indexes produced by http.client.SimpleHTTPRequestHandler.
- gh-102153: urllib.parse.urlsplit() now strips leading C0 control and
space characters following the specification for URLs defined by WHATWG
in response to CVE-2023-24329. Patch by Illia Volochii.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b7b11d7e94)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python-docker needs a working docker setup to do anything useful, so add it
to the existing docker_compose (which tests docker and docker-compose)
rather than adding a completely new test.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0bb63c6f5a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d680db0ba7 (package/python-docker: bump to version 6.0.1) forgot
to add the new dependency on python-packaging, leading to runtime errors:
import docker
File "/usr/lib/python3.11/site-packages/docker/__init__.py", line 2, in <module>
File "/usr/lib/python3.11/site-packages/docker/api/__init__.py", line 2, in <module>
File "/usr/lib/python3.11/site-packages/docker/api/client.py", line 10, in <module>
File "/usr/lib/python3.11/site-packages/docker/auth.py", line 7, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/__init__.py", line 3, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/decorators.py", line 4, in <module>
File "/usr/lib/python3.11/site-packages/docker/utils/utils.py", line 9, in <module>
ModuleNotFoundError: No module named 'packaging'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1dcabece6f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
defconfig fragment to reproduce the issue:
BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET=y
BR2_PACKAGE_QEMU=y
BR2_PACKAGE_QEMU_SYSTEM=y
ERROR: Problem encountered: fdt not available but required by targets
aarch64-softmmu, arm-softmmu, i386-softmmu, loongarch64-softmmu,
microblaze-softmmu, microblazeel-softmmu, mips64el-softmmu,
nios2-softmmu, or1k-softmmu, ppc-softmmu, ppc64-softmmu,
riscv32-softmmu, riscv64-softmmu, rx-softmmu, x86_64-softmmu
Commit [1] select BR2_PACKAGE_QEMU_FDT for each individual emulator targets
but forgot to select is when BR2_PACKAGE_QEMU_CHOOSE_TARGETS is not set
(building for all targets).
Fixes:
http://autobuild.buildroot.org/results/e44/e444a02b899d325a9d99daed96b8cb96108383e7
[1] 44be514b21
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Carlos Santos <unixmania@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 59df3875b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
1.3.39:
- oss-fuzz: Several security fixes originating from oss-fuzz testing.
- ALL: Replace strcpy() with strlcpy(), replace strcat() with strlcat(),
replace sprintf() with snprintf(). Prefer using bounded string functions.
This change is made for the purpose of increasing safety than to address
any existing demonstrated concern.
1.3.40:
- DCX: Fixed heap overflow when writing more than 1023 scenes, and also
eliminated use of uninitialized memory.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Peter: mark as security fix, extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fd3ff0761c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (e.g. libjxl) requires a quite recent cmake version,
that is not yet available in most distributions, especially those
LTS versions.
Currently, when we bump the minimum cmake version we require, it gets
bumped for all packages, regardless of their own minimum required
version, which means that a given configuration will trigger the
build of our host-cmake even if the packages that require it are not
enabled and those that are would be content with the system-provided
cmake.
Since host-cmake can take quite some time to build, this can get a
bit annoying to pay the price of a host-cmake build that would
otherwise not be needed.
Some packages even use an alternative build system when available
since they requires a more recent version of cmake than the our
minimum cmake version
(wpewebkit use Ninja: 78d499409f).
We introduce config options that packages can select to indicate
what minimal cmake version they require, and use that version as the
required minimal version required by the current configuration [0].
We would like to ensure that the currently selected minimum cmake
version is indeed lower (or equal) to the cmake version we package,
but that is not possible: dependencies.mk is parsed before we parse
packages, so we do not yet know the cmake version we have, and we
can't invert the parsing order as we need to know the required
dependencies before we parse packages (so that we can build their
dependency rules in Makefile). So we can only add comments in both
places, that refer to the other location.
[0] note that this is yet not optimal, as in such a case, host-cmake
would be in the dependency chain of all cmake-based packages, even
for those packages that do not require it. The optimum would be for
each package to gain such a dependency on an as-needed basis, but
this is by far more complex to achieve, and would only speed up
cases where a single package is built from scratch (e.g. with:
make clean; make foo), which is not worth optimising (yet?)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 53beb8fc1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo.
This may result in unexpected behavior when running a go program which
uses cgo.
This may occur when running an untrusted module which contains directories
with newline characters in their names. Modules which are retrieved using
the go command, i.e. via "go get", are not affected (modules retrieved
using GOPATH-mode, i.e. GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the
setuid/setgid bit set. On Unix platforms, if a setuid/setgid binary was
executed with standard I/O file descriptors closed, opening any files
could result in unexpected content being read/written with elevated
prilieges. Similarly if a setuid/setgid program was terminated, either
via panic or signal, it could leak the contents of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo.
This may occur when running "go get" on a malicious module, or when
running any other command which builds untrusted code. This is can by
triggered by linker flags, specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues
https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 620ce32227)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch cleans up board/zynqmp shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: wrap long lines, use quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 48c3d9f396)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch cleans up board/zynq shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: use ${} for variables, quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7db2ab3041)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes
(see https://github.com/redis/redis/blob/7.0/00-RELEASENOTES):
================================================================================
Redis 7.0.11 Released Mon Apr 17 16:00:00 IST 2023
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2023-28856) Authenticated users can use the HINCRBYFLOAT command to create
an invalid hash field that will crash Redis on access
...
================================================================================
Redis 7.0.10 Released Mon Mar 20 16:00:00 IST 2023
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2023-28425) Specially crafted MSETNX command can lead to assertion and denial-of-service
...
================================================================================
Redis 7.0.9 Released Tue Feb 28 12:00:00 IST 2023
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2023-25155) Specially crafted SRANDMEMBER, ZRANDMEMBER, and HRANDFIELD
commands can trigger an integer overflow, resulting in a runtime assertion
and termination of the Redis server process.
* (CVE-2022-36021) String matching commands (like SCAN or KEYS) with a specially
crafted pattern to trigger a denial-of-service attack on Redis, causing it to
hang and consume 100% CPU time.
...
================================================================================
Redis 7.0.8 Released Mon Jan 16 12:00:00 IDT 2023
================================================================================
Upgrade urgency: SECURITY, contains fixes to security issues.
Security Fixes:
* (CVE-2022-35977) Integer overflow in the Redis SETRANGE and SORT/SORT_RO
commands can drive Redis to OOM panic
* (CVE-2023-22458) Integer overflow in the Redis HRANDFIELD and ZRANDMEMBER
commands can lead to denial-of-service
...
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c29bf1d2db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported [1], the test TestIPythonPy3 fail since it was updated
to 8.6.0 release just after 2022.11.
ModuleNotFoundError: No module named 'stack_data'
Indeed there is no such python3-stack-data in Buildroot.
For example, Fedora packaging added python3-stack-data while updating
to ipython 8.0.1.
With python-stack-data added, the test TestIPythonPy3 still fail
with:
ModuleNotFoundError: No module named 'sqlite3'
Since ipython 8 sqlite3 fallback imports has been removed [2].
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4322819089
[1] http://lists.busybox.net/pipermail/buildroot/2023-May/668086.html
[2] 7a0bdabecf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8d93c999a3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'earlyoom --help' still says 'earlyoom 1.6' though it's already
version 1.7. '-DVERSION' flag value should be either unhardcoded,
either updated with each package version bump.
Signed-off-by: Sergey Bobrenok <SIBobrenok@sberdevices.ru>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 239dd7dcbd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'/etc/init.d/S02earlyoom start' simply prints 'OK' instead of
'Starting earlyoom: OK' because of a typo in the printf function call.
Signed-off-by: Sergey Bobrenok <SIBobrenok@sberdevices.ru>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 281a80dc93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
earlyoom.mk file explicitly sets 'PREFIX=/usr', and the init script
fails to start earlyoom because of a nonexistent executable path:
# /etc/init.d/S02earlyoom start
start-stop-daemon: unable to stat /bin/earlyoom (No such file or directory)
FAIL
Signed-off-by: Sergey Bobrenok <SIBobrenok@sberdevices.ru>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b2fb3a7e2a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tzdata and tzcode (for zic) are released in lock-step, as they go
together, so we update both simultaneously.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 179ae2fa6b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is quite customary to use a single repository with multiple workdirs,
one for each active branch, with either the aging 'git new-workdir' or
the more recent 'git worktree'.
However, in a workdir/worktree, most entries in .git/ are only symlinks
to the actual files in the main repository.
Currently, utils/docker-run only bind-mounts the current working copy.
If that is a workdir/worktree, then it is going to be missing the actual
git data, resulting in errors like:
$ ./utils/docker-run make check-package
fatal: not a git repository (or any parent up to mount point [....]/buildroot)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
No files to check style
make: *** [Makefile:1257: check-package] Error 1
So, we also bind-mount the actual git directory. If that is a subdir
of the current working copy, then it is already mounted and thus the
bind-mount is superfluous but harmless; for simplicity, we mount it
unconditionally.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
(cherry picked from commit 791c163b2f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other changes:
- Switch to tar.xz as the package is not distributed as a .bz2 any longer.
- Update the sha256sum of the license file, as it has been updated to
include the following text:
"Original author of nftables distributed the code under the terms of the
GPL version 2 *only*. New code though is moving to GPL version 2 or any
later which is the preferred license for this project these days."
The author has also changed from Patrick McHardy <kaber@trash.net> to
Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d1b8e723fd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in commit 1fb64680bf (package/mupdf: bump to version 1.20.3), we
no longer carry the two patches that were fixing two CVEs. But the
commit forgot to rop the exclusion of those two CVEs.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
[yann.morin.1998@free.fr: offload to its own commit, write commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 952fdd8fb1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When an ignored file is removed (e.g. a package patch is no longer
needed after a version bump), the corresponding entry in the ignore list
is no longer needed.
However, we currently only validate that an ignored *test* still fails,
not that a ignore files is now missing.
Add a new test to check-package that does that check, and add a
test-case for that check.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
(cherry picked from commit 5eac4f81eb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain-builder project reported an issue with Qemu 7.2.0 for
x86-core2--glibc--bleeding-edge toolchain [1]:
Run /sbin/init as init process
random: fast init done
EXT4-fs (vda): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
Starting syslogd: OK
traps: syslogd[52] general protection fault ip:b7e21465 sp:bfe59e6c error:0 in libc.so.6[b7d9b000+123000]
Starting klogd: OK
traps: klogd[56] general protection fault ip:b7e94465 sp:bf8f069c error:0 in libc.so.6[b7e0e000+123000]
Running sysctl: traps: logger[62] general protection fault ip:b7e48b6c sp:bfd7d194 error:0 in libc.so.6[b7e05000+123000]
Segmentation fault
traps: logger[64] general protection fault ip:b7dd3b6c sp:bf9b8604 error:0 in libc.so.6[b7d90000+123000]
Segmentation fault
(Followed by a kernel panic.)
Testing with the pevious Qemu release (7.1.0) allows to boot the system without any problem.
Building qemu sources between 7.1.0 and 7.2.0 allows to identify the first "bad" commit [2] and
report to the Qemu project [3].
Thanks to Qemu maintainers review, several issues was noticed:
"The default i386 busybox build config does not respect glibc's requirements around stack alignment
(see [4] for previous discussions and a workaround)."
Disabling CONFIG_STACK_OPTIMIZATION_386 option (as suggested in the Gentoo bug report) fixed the issue!
This option has been added and enabled by default in buxybox 1_29_0, so it was used since then the for
Buildroot's qemu defconfig.
Note: The x86-i686--glibc--bleeding-edge (generic x86) doesn't trigger the issue with
CONFIG_STACK_OPTIMIZATION_386 enabled.
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/3731683337
[1] https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/3731683337
[2] 958e1dd130
[3] https://gitlab.com/qemu-project/qemu/-/issues/1478
[4] https://bugs.gentoo.org/725674
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f3fa74a8f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to release notes from Microchip, this fixes a memory
leak in AP modes, fixes a failure with an undisclosed but specific
AP, and re-certified with WFA for WILC1000.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2003877ceb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2dff6e93ca (package/readline: add upstream patch to fix crash
with invalid locale specification) fixed a regression in readline 8.2
[0], that could have been caught with a runtime test. readline is a
library, so we need an executable that exercises readline.
Since readline and bash are developped in tandem [1], it is only logical
to use bash to test readline.
Add a new runtime test for bash, that checks that we can indeed run an
interactive shell, and that an non-existing locale does not cause the
dreaded segfault. We do not use the default configuration, because it
uses a uclibc toolchain, and we want to reproduce against a glibc one.
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1021109
[1] https://tiswww.case.edu/php/chet/readline/rltop.html#Bugs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 511f28ae5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current mupdf version fails to build when zlib-ng is used as the
zlib implementation. Add a patch to fix it.
This fixes the following build failure raised since the bump to
version 1.21.0 of the mupdf package in commit
3c2033cd2a:
source/fitz/encode-basic.c: In function 'deflate_write':
source/fitz/encode-basic.c:343:27: error: 'UINT_MAX' undeclared (first use in this function)
343 | newbufsize = n >= UINT_MAX ? UINT_MAX : deflateBound(&state->z, n);
| ^~~~~~~~
source/fitz/encode-basic.c:26:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
Fixes: http://autobuild.buildroot.net/results/87128e9967cff20078c65ab847877aa44cc409d9
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b20eb56440)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If both, hicolor-icon-theme (selected by libgtk3-demo) and
adwaita-icon-theme is not selected, then the /usr/share/icons
folder is empty, causing find to fail.
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Tested-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d2f45dea4c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The most recent release of RPM is v4.18.1 [1].
Adding an upstream patch to prevent build failures for certain
toolchains (0001-fix-var-declare-in-label-error.patch). Fix should be
available next release.
[1]: https://rpm.org/wiki/Releases/4.18.1
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 233be1c216)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding a series of feature-disable configurations of options introduced
over the recent versions, but where never added.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2a068781f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a previous commit [1], the use of `KCONFIG_ENABLE_OPT` was tweaked in
a way which no longer generates a default output unless the quiet flag
is unset (`Q=`). The use of `KCONFIG_SET_OPT` and `KCONFIG_DISABLE_OPT`
does not apply a quiet operation. In order to make all these kernel
configuration defines operate in a consistent way, adjusting both
`KCONFIG_SET_OPT` and `KCONFIG_DISABLE_OPT` to be default-quiet as well.
[1]: 66d2ff25ba
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c110bb17ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package binaries can be successfully built for and then executed on
RISC-V platforms including RV32 and RV64 variants. Tested in QEMU.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f7d0ed4a78)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buxybox's init segfault when built with x86 musl toolchain due to
recent changes about sha1 and sha156 hwaccel support in Busybox 1.36.0.
From Alpinelinux [1]:
"main/busybox: disable sha hwaccel
the flag check for this seems incorrect- it triggers sha_ni use when
the instructions aren't available, but avx512vl/bw is - Elly on irc
causes failures in github actions, which have avx512 but no sha_no"
The flag check was supposed to be fixed upstream by commit [2].
But init still crash with the latest 1_36_stable (with backported patch)
and master branch...
The same workaround has been applied to openembedded-core [3], which
states that they also have the issue with glibc.
Disable hardware sha acceleration on x86 (not x86_64), to avoid the
issue.
Checked that qemu_x86_64_defconfig with musl for x86_64 for core2 boot
as expected with sha hwaccel enabled.
Fixes:
https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/4202276721
[1] https://git.alpinelinux.org/aports/commit/main/busybox?id=ae2cfdf6f6da3dc46ee09d8ceafa26921f6e058e
[2] https://git.busybox.net/busybox/commit/?id=bd76b75f72f717150b909e8c64edfda725cabe11
[3] 22f639d611
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a57c02a4ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 65ff3e10ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LDFLAGS need to be passed to the micropython build system via the
LDFLAGS_EXTRA variable, which was so far missing. This patch adds it.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f89b988d33)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following runtime failure raised since bump of popt to version
1.19 in commit 895bfba93f:
Segmentation fault (core dumped)
Fix the issue by backporting a fix found in upstream git repository [0].
[0] f5de3401b9/
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f2a676dcff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- do not only disable NTLM delegation to winbinds ntlm_auth but
disable NTLM support overall (and drop enforced libopenssl DES
dependency introduced by 'package/libcurl: make sure openssl
supports DES' (commit f25c820a4f)
- change man page hint to https URL
- rearrange configure options to one option per line
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7b1a980465)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perl-clone is a new mandatory dependency of perl-http-message v6.44
that is already available in Buildroot since commit [1].
[1] 79e8aad721
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0ac6713cee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"Toolchain prefix" option apparently doesn't have any help describing
it, which causes confusion when using external toolchain. Leaving this
option at default prefix name ("$(ARCH)-linux") when external toolchain
components are called with different prefix (e.g.
"$(ARCH)-unknown-linux-gnu") may cause build failure unless the prefix
symlink is already in place (e.g. when using Buildroot-generated
toolchain as external toolchain).
Describe the option to clarify.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e418a2c06a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch to fix host compile error on openSUSE Tumbleweed
(gcc-13.0.1).
Fixes:
.../build/host-llvm-11.1.0/include/llvm/Support/Signals.h:117:8: error: variable or field ‘CleanupOnSignal’ declared void
117 | void CleanupOnSignal(uintptr_t Context);
| ^~~~~~~~~~~~~~~
.../build/host-llvm-11.1.0/include/llvm/Support/Signals.h:117:24: error: ‘uintptr_t’ was not declared in this scope
117 | void CleanupOnSignal(uintptr_t Context);
| ^~~~~~~~~
.../build/host-llvm-11.1.0/include/llvm/Support/Signals.h:18:1: note: ‘uintptr_t’ is defined in header ‘<cstdint>’; did you forget to ‘#include <cstdint>’?
17 | #include <string>
+++ |+#include <cstdint>
18 |
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f0795bd104)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The br-arm-internal-glibc.config used to be generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat and produce invalid configuration since binutils 2.36
removal in d08639e6b9e5... so let's bring it up-to-date:
- Binutils 2.39.x
- GCC 12.x
Since Buildroot 2022.02, the autobuilders doesn't use the csv file anymore
but the test-pkg script still use it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4944ff2878)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds the upstream patch that fixes the CVE.
No new release so far.
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3816471496)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When explicitly specifying printing backends libgtk3 requires file
to be one of them on linux.
Fixes:
- output/build/libgtk3-3.24.37/modules/printbackends/meson.build:39:4: ERROR: Problem encountered: 'file' print backed needs to be enabled
Signed-off-by: Daniel Lang <dalang@gmx.at>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9a0857d734)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When browsing the help references for various systemd features, it was
observed that the `systemd-rfkill` link was dead (originally pointing to
`systemd-rfkill@.service.html`; now `systemd-rfkill.service.html`). This
commit corrects this link, as well as updates all other links to https
(since freedesktop.org now force redirects to https).
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8520da532b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable building with libressl to avoid the following build failure
raised since the addition of the package in commit
ea36681572:
In file included from /home/thomas/autobuild/instance-2/output-1/build/zeek-4.1.1/src/analyzer/protocol/mime/MIME.cc:7:
/home/thomas/autobuild/instance-2/output-1/build/zeek-4.1.1/src/zeek/digest.h: In function 'void* EVP_MD_CTX_md_data(const EVP_MD_CTX*)':
/home/thomas/autobuild/instance-2/output-1/build/zeek-4.1.1/src/zeek/digest.h:22:12: error: invalid use of incomplete type 'const EVP_MD_CTX' {aka 'const struct env_md_ctx_st'}
22 | return ctx->md_data;
| ^~
Fixes:
- http://autobuild.buildroot.org/results/2db2988d495f9d06d058fb532a2dcfa9ef6e207c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5b63325e86)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The test chckes that the "Upstream:" tag be on the first column, without
any leading character (no space, no bracket of any kind).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d89fdaea2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a3e796b74e (utils/check-package: fix grammar) only partially
fixed the test-case (git commit --amend missed the test-case...)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4f38b5dcbd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The past participle for "to fix" is "fix". The "did you forget" got
eluded into "forget", so again a past participle.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a3e796b74e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, utils/docker-run spawns a container with a tty, so that he
user can interact properly in the container.
However, that requires a tty when calling docker-run, which is not
always guaranteed, e.g. if called from a git hook.
Since the script is a bash script already, we can use an array to store
options passed to docker, and only add the -t option when there is
actually a tty available.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
(cherry picked from commit 3d8212c4b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix three CVEs (CVE-2023-25652, CVE-2023-25815, and CVE-2023-29007).
For details on these, see release announcement at [1].
While at it, also drop two Buildroot patches as these have been
applied on upstream release branch.
[1]: https://lore.kernel.org/git/xmqqa5yv3n93.fsf@gitster.g/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by [1], version 0.12.0 fixes these errors:
Error executing event examine-end on target stm32f7x.cpu:
buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl:37: Error: wrong # args: should be "expr expression"
in procedure 'mmw' called at file "buildroot/output/host/bin/../share/openocd/scripts/target/stm32f7x.cfg", line 103
at file "buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl", line 37
Info : starting gdb server for stm32f7x.cpu on 3333
Info : Listening on port 3333 for gdb connections
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
Error executing event examine-end on target stm32f7x.cpu:
buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl:37: Error: wrong # args: should be "expr expression"
in procedure 'ocd_process_reset'
in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 288
in procedure 'mmw' called at file "buildroot/output/host/bin/../share/openocd/scripts/target/stm32f7x.cfg", line 103
at file "buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl", line 37
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x080003fc msp: 0x20050000
Error executing event reset-init on target stm32f7x.cpu:
buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl:37: Error: wrong # args: should be "expr expression"
in procedure 'ocd_process_reset'
in procedure 'ocd_process_reset_inner' called at file "embedded:startup.tcl", line 288
in procedure 'mmw' called at file "buildroot/output/host/bin/../share/openocd/scripts/board/stm32f769i-disco.cfg", line 71
at file "buildroot/output/host/bin/../share/openocd/scripts/mem_helper.tcl", line 37
Remove upstream patches.
The new version moves the GPL-2.0 license from COPYING to the subfolder
"preferred", adding the header required by spdxcheck.py. A minimalist
COPYING is added in the top directory, as required by automake, pointing
to the files in LICENSES.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1014849
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[yann.morin.1998@free.fr:
- one license or license file per line
- reorder licenses to match file order
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 53bad8f502)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since upstream Linux commit ed21d6d7c48e6e96c2d617e304a7ebfbd17b1807
("perf tests: Add test for PE binary format support") present in >=
v5.10 there is an unconditional installation of PE binaries.
Some toolchains have a readelf tool that correctly interpret the PE
files, and reports ELF-alike fields. This causes check-bin-arch to
reject those files.
Make sure that these binaries are excluded from being checked to allow
the installation of the perf tests.
Fixes: 6fcdaa4c50 ("package/linux-tools: Allow installation of perf scripts")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a7ad781626)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jobs with the syntax @hourly, @daily, ... were not executed since the
version bump from `v4.5` to commit `1ba33c3325df48de46263276a43ed76cf9d81518`.
This patch fixes the bug downstream.
Signed-off-by: Mario Haustein <mario.haustein@hrz.tu-chemnitz.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1557312f18)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CGO (the Go language C bindings) normally links dynamically with the C
libraries. It seems that passing -extldflags=-static is not sufficient
to make sure they link statically. As a result, a build using CGO will
fail with
runtime.gcdata: missing Go type information for global symbol .dynsym: size 72
There are two modules in the standard Go library that can use CGO:
os/user and net. Both of these have pure Go versions, however, which can
be selected with the osusergo and netgo tags. Since these two are
standard library modules that get used in almost all Go programs, pass
those flags in the common infrastructure.
It's not entirely clear if this is always the case or only depending on
the specific way CGO is used. In the former case, we could instead
disable CGO globally if static libs are enabled. However, it turns out
that this doesn't solve the problem completely anyway (delve still fails
to link, with different errors). Also, it is possible that other cgo
modules do still work. Therefore, just stick to adding the osusergo and
netgo tags.
Cf. Statically compiling Go programs [0]
Fixes:
- crucible:
http://autobuild.buildroot.net/results/c2f/c2f29f55b461899e8e15c0494578304e6f74bf51/
- containerd:
http://autobuild.buildroot.net/results/699/69910fc6b9f474a7eb0ca7ffa27ac5512cc1bb37/
- delve:
http://autobuild.buildroot.net/results/552/55225d5da17e85271943f7adce6f07d014d9717d/
- probably others...
[0] https://www.arp242.net/static-go.html
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c6bb759e2c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The coremark build needs to set PORT_CFLAGS explicitly in order to pick
up the configured optmisation level, and other flags.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c9a13ae083)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
[yann.morin.1998@free.fr: split off the previous patch by Thierry]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4468f82885)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a paragraph and an example about using the Buildroot image registry
hosted on gtilab.com, for people who want to build their own image based
on the offical one.
Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d9228faa4d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since commit
9d1d4818c3:
[ 98%] Generating Poppler-0.18.typelib
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file /home/giuliobenetti/autobuild/run/instance-1/output-1/build/poppler-21.12.0/glib/Poppler-0.18.gir: Failed to parse included gir GObject-2.0
If the above error message is about missing .so libraries, then setting up GIR_EXTRA_LIBS_PATH in the .mk file should help.
Typically like this: PKG_MAKE_ENV += GIR_EXTRA_LIBS_PATH="$(@D)/.libs"
Fixes:
- http://autobuild.buildroot.org/results/d2f50aa56410c2fff8a0538c57038104906e747e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- drop patch adding INTROSPECTION_COMPILER_ARGS as it's now upstream
as of 22.02.0, and we use 22.10.0
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4466c20621)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, the documentation only requested links to upstream commits
when backporting patches.
Based on a mailing list discussion [0], patches should, when possible
and when approriate, provide a link as evidence that the patch has been
submitted upstream.
The motivation is that hopefully the patch gets applied to upstream at
some point reducing the long term maintenance burden within Buildroot.
This also makes future patch review on subsequent package version bumps
more streamlined.
For patches that are unique to BR and do not apply to the upstream
repository, patches should have a comment explaining why they do not
apply upstream.
[0] https://lists.buildroot.org/pipermail/buildroot/2023-March/666000.html
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5b00b40a05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With introduction of vmap'ed stacks to ARM in Linux v5.18, stack
parameters can no longer be used for DMA. So pull the latest xradio
changes that fix the driver and make it work with vmap'ed stacks
in new kernels.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 53baedf912)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel versions prior to 3.4 did not have V4L2_CAP_DEVICE_CAPS and
compiling against such a kernel will fail.
This patch introduces a version check and makes eudev fall back to
v2cap.capabilities on these kernels.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8f646eb2a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Cargo, it is quite typical for "build scripts" to be written in Rust
and therefore they need to be compiled as part of the overall build. In
cross-compilation, that means a mixed host and target build.
Unfortunately, by default Cargo makes no distinction between the
RUSTFLAGS used for the host and the target. There is, however, an
unstable feature to make this distinction [1][2].
We already have CARGO_TARGET_APPLIES_TO_HOST="false". This makes sure
that any configuration that we make for the target doesn't automatically
apply to the host as well. However, this only applies for per-target
configuration, for example the setting of "cc" in the config.toml
generated by package/rust/rust.mk. Flags that are passed with RUSTFLAGS
still apply to both host and target. Therefore, we need to use the
CARGO_TARGET_<tuple>_RUSTFLAGS environment variable instead of plain
RUSTFLAGS.
This, however, doesn't allow us to specify flags that apply only to the
host. We could use CARGO_TARGET_<hosttuple>_RUSTFLAGS for that, but that
doesn't work in case the host and target tuple are the same. For this,
we need another unstable feature, enabled with
CARGO_UNSTABLE_HOST_CONFIG="true". With this enabled, we can specify
flags that apply only for the host build using CARGO_HOST_RUSTFLAGS.
Currently, we don't have any such flags, but we really should: we should
pass the proper link flags to point to $(HOST_DIR)/lib. Therefore, add
CARGO_HOST_RUSTFLAGS doing exactly that.
[1] https://doc.rust-lang.org/nightly/cargo/reference/unstable.html#host-config
[2] https://github.com/rust-lang/cargo/pull/10395
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit b40a2cc391)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The shebang in check-package now defines python3. There is no longer a
need to maintain support with python 2.x.
See-also: 02b165dc71 (check-package: fix Python3 support)
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Tested-by: James Knight <james.d.knight@live.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b7d4ae98fa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For years already, $(HOST_DIR)/usr is deprecated. Install directly in
$(HOST_DIR). This will trigger a check-package error in the following
commit.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 47910ccc36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move RUSTFLAGS for host builds to HOST_PKG_CARGO_ENV so that they
are set for host cargo builds which don't use the cargo infrastructure,
e.g. python packages that include rust code.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit d775b2ac05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mdadm contains various udev rules to manage RAID assembly and create
symlinks, install them if udev (or equivalent) is enabled.
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
[Arnout: use MDADM_INSTALL_TARGET_OPTS for install-bin as well]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 0385719706)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 924b163b1e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.19.8 (released 2023-04-04) includes security fixes to the go/parser,
html/template, mime/multipart, net/http, and net/textproto packages, as well as
bug fixes to the compiler, the linker, the runtime, and the time package.
Fixes security vulnerabilities:
go/parser: infinite loop in parsing (CVE-2023-24537)
html/template: backticks not treated as string delimiters (CVE-2023-24538)
net/http, net/textproto: denial of service from excessive memory
allocation (CVE-2023-24534)
net/http, net/textproto, mime/multipart: denial of service from excessive
resource consumption (CVE-2023-24536)
https://go.dev/doc/devel/release#go1.19.8https://github.com/golang/go/issues?q=milestone%3AGo1.19.8+label%3ACherryPickApproved
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b7eaa9af7b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the fifth patch release in the 1.1.z series of runc, which fixes
three CVEs found in runc.
CVE-2023-25809 is a vulnerability involving rootless containers where
(under specific configurations), the container would have write access to the
/sys/fs/cgroup/user.slice/... cgroup hierarchy. No other hierarchies on the host
were affected. This vulnerability was discovered by Akihiro Suda.
GHSA-m8cg-xc2p-r3fc
CVE-2023-27561 was a regression which effectively re-introduced CVE-2019-19921.
This bug was present from v1.0.0-rc95 to v1.1.4. This regression was discovered
by Beuc. GHSA-vpvm-3wq2-2wvm
CVE-2023-28642 is a variant of CVE-2023-27561 and was fixed by the same patch.
This variant of the above vulnerability was reported by Lei Wang.
GHSA-g2j6-57v7-gm8c
In addition, the following other fixes are included in this release:
- Fix the inability to use /dev/null when inside a container
- Fix changing the ownership of host's /dev/null caused by fd redirection
- Fix rare runc exec/enter unshare error on older kernels, including CentOS < 7.7
- nsexec: Check for errors in write_log()
https://github.com/opencontainers/runc/releases/tag/v1.1.5
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 52976c54f7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From [1]:
* sshd(8): fix a pre-authentication double-free memory fault
introduced in OpenSSH 9.1. This is not believed to be exploitable,
and it occurs in the unprivileged pre-auth process that is
subject to chroot(2) and is further sandboxed on most major
platforms.
* ssh(8): in OpenSSH releases after 8.7, the PermitRemoteOpen option
would ignore its first argument unless it was one of the special
keywords "any" or "none", causing the permission list to fail open
if only one permission was specified. bz3515
* ssh(1): if the CanonicalizeHostname and CanonicalizePermittedCNAMEs
options were enabled, and the system/libc resolver did not check
that names in DNS responses were valid, then use of these options
could allow an attacker with control of DNS to include invalid
characters (possibly including wildcards) in names added to
known_hosts files when they were updated. These names would still
have to match the CanonicalizePermittedCNAMEs allow-list, so
practical exploitation appears unlikely.
From [2]:
* ssh-add(1): when adding smartcard keys to ssh-agent(1) with the
per-hop destination constraints (ssh-add -h ...) added in OpenSSH
8.9, a logic error prevented the constraints from being
communicated to the agent. This resulted in the keys being added
without constraints. The common cases of non-smartcard keys and
keys without destination constraints are unaffected. This problem
was reported by Luci Stanescu.
* ssh(1): Portable OpenSSH provides an implementation of the
getrrsetbyname(3) function if the standard library does not
provide it, for use by the VerifyHostKeyDNS feature. A
specifically crafted DNS response could cause this function to
perform an out-of-bounds read of adjacent stack data, but this
condition does not appear to be exploitable beyond denial-of-
service to the ssh(1) client.
The getrrsetbyname(3) replacement is only included if the system's
standard library lacks this function and portable OpenSSH was not
compiled with the ldns library (--with-ldns). getrrsetbyname(3) is
only invoked if using VerifyHostKeyDNS to fetch SSHFP records. This
problem was found by the Coverity static analyzer.
[1] https://www.openssh.com/txt/release-9.2
[2] https://www.openssh.com/txt/release-9.3
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 68ca5f1e1f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-22432: Open redirect vulnerability exists in web2py
versions prior to 2.23.1. When using the tool, a web2py user may be
redirected to an arbitrary website by accessing a specially crafted URL.
As a result, the user may become a victim of a phishing attack.
https://github.com/web2py/web2py/compare/v2.23.0...v2.23.1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 11f8c11dfb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixed (security) [APP-70]: Memory leak in MibLeaf::set if same OID is set
twice in the same PDU.
- Fix the following build failure raised since bump of snmppp to version
3.5.0 in commit e011fa0415:
snmp_pp_ext.cpp: In member function 'int Agentpp::Snmpx::send(const Agentpp::Pdux&, Snmp_pp::SnmpTarget*)':
snmp_pp_ext.cpp:1172:47: error: binding reference of type 'Snmp_pp::Pdu&' to 'const Snmp_pp::Pdu' discards qualifiers
1172 | status = snmpmsg.loadv3(Snmp::get_mpv3(), pdu, engine_id, security_name,
|
Fixes:
- http://autobuild.buildroot.net/results/d7347b8b3953596b66da6ca6d85f084fb427934c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5f06ecf5e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-27371: GNU libmicrohttpd before 0.9.76 allows remote DoS
(Denial of Service) due to improper parsing of a multipart/form-data
boundary in the postprocessor.c MHD_create_post_processor() method. This
allows an attacker to remotely send a malicious HTTP POST packet that
includes one or more '\0' bytes in a multipart/form-data boundary field,
which - assuming a specific heap layout - will result in an
out-of-bounds read and a crash in the find_boundary() function.
https://lists.gnu.org/archive/html/libmicrohttpd/2023-02/msg00000.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3b645ffda6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The impetus for this change was that wget fails to load pages signed by
Let's Encrypt due to missing root certs. This version has the updated and
correct certs.
0002-mozilla-certdata2pem.py-Fix-compat-with-cryptography.patch
Patch dropped because the fix is incorporated upstream.
Signed-off-by: Steve Hay <me@stevenhay.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9f5c8bd430)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- http://autobuild.buildroot.net/results/fdf2b2eb252a24e81bddad1c81c4fdfb03dc0afe
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp: In member function 'bool dtlsopenssl::DtlsState::initCtxAndConnection(QDtlsBasePrivate*)':
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp:669:9: error: 'q_SSL_set_psk_server_callback' was not declared in this scope; did you mean 'q_SSL_set_psk_use_session_callback'?
669 | q_SSL_set_psk_server_callback(newConnection.data(), dtlscallbacks::q_PSK_server_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_psk_use_session_callback
.../build/qt6base-6.4.2/src/plugins/tls/openssl/qdtls_openssl.cpp:671:9: error: 'q_SSL_set_psk_client_callback' was not declared in this scope; did you mean 'q_SSL_set_info_callback'?
671 | q_SSL_set_psk_client_callback(newConnection.data(), dtlscallbacks::q_PSK_client_callback);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| q_SSL_set_info_callback
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 971ae7b266)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running "make check-package" on a system with shellcheck 0.9.0,
the command fails with output:
make check-package
package/linux-tools/S10hyperv:0: run 'shellcheck' and fix the warnings
...
2 warnings generated
This commit fixes the warnings reported by the command:
shellcheck package/linux-tools/S10hyperv
This commit also fixes the four-space indent by a single tab on the
changed lines. Since this fixes the indentation warnings of
check-package, the Indent exclusion in .checkpackageignore is also
removed.
Fixes:
In package/linux-tools/S10hyperv line 27:
return $ret
^--^ SC2086 (info): Double quote to prevent globbing and word splitting.
In package/linux-tools/S10hyperv line 48:
return $ret
^--^ SC2086 (info): Double quote to prevent globbing and word splitting.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c4173d8b08)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bagas is keen to maintain git package for Buildroot. However, due to
limited resources available, he can only do testing as far as
build testing. Other developers are needed to help him maintain the
package.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 562cf1fbdb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
