Fixes the following vulnerabilities:
- CVE-2021-42374: An out-of-bounds heap read in Busybox's unlzma applet
leads to information leak and denial of service when crafted
LZMA-compressed input is decompressed
- CVE-2021-42375: An incorrect handling of a special element in Busybox's
ash applet leads to denial of service when processing a crafted shell
command, due to the shell mistaking specific characters for reserved
characters. This may be used for DoS under rare conditions of filtered
command input
- CVE-2021-42376: A NULL pointer dereference in Busybox's hush applet leads
to denial of service when processing a crafted shell command, due to
missing validation after a \x03 delimiter character. This may be used for
DoS under very rare conditions of filtered command input.
- CVE-2021-42377: An attacker-controlled pointer free in Busybox's hush
applet leads to denial of service and possible code execution when
processing a crafted shell command, due to the shell mishandling the &&&
string. This may be used for remote code execution under rare conditions
of filtered command input.
For details, see:
https://jfrog.com/blog/unboxing-busybox-14-new-vulnerabilities-uncovered-by-claroty-and-jfrog/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pause() is defined in glibc since the very early times; it appears in
upstream commit 28f540f45bba (initial import) in 1995 [0].
Bluez has been defining a function named pause() for ages too, since
comit caab74c97542 (media: Implement new callbacks for pass-through
operations) in 2013 [1]
With the recent bump to glibc 2.34.xxx, the build now fails because the
two pause() clash:
profiles/audio/media.c:1284:13: error: conflicting types for 'pause'
1284 | static bool pause(void *user_data)
| ^~~~~
In file included from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib/gbacktrace.h:36,
from /tmp/instance-0/output-1/per-package/bluez5_utils/host/bin/../s390x-buildroot-linux-gnu/sysroot/usr/include/glib-2.0/glib.h:34,
from profiles/audio/media.c:21:
/tmp/instance-0/output-1/per-package/bluez5_utils/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:489:12: note: previous declaration of 'pause' was here
489 | extern int pause (void);
| ^~~~~
The culprit is indeed glibc 2.34, as can be seen in this result matrix:
\ bluez5_utils
glibc \ 5.60 | 5.61
-------\-------+--------
2.33 | OK | OK
-------+-------+--------
2.34 | KO | KO
Even though we first bumped to glibc 2.34, then to blues5_utils 5.61,
we did not notice build issues with bluez5_utils 5.60 because the two
bumps were too close to each other for the failure to trigger in the
autobuilders.
The underlying reason that pause() is now causing issues with glibc 2.34
is not obvious: glibc is a big beast, and finding such issues is not
easy. However, we can see that the pause() provided by NPTL has been
dropped in favour of the generic one, so maybe this is causing symbol
visibility or weakness to change or something...
We fix that by renaming the local pause() in bluez5_utils with a
namespace-prefix, like some other functions there already have.
Fixes:
- http://autobuild.buildroot.org/results/c4f/c4fbface34be8815838fd7201621d7a8fddd32c5/
- http://autobuild.buildroot.org/results/62b/62b88740f19fbe4a1ad7959dc141d539eb88c1f8/
[0] https://sourceware.org/git/?p=glibc.git;a=commit;h=28f540f45bbacd939bfd07f213bcad2bf730b1bf
[1] https://github.com/bluez/bluez/commit/caab74c97542a56b591f0b16b44ab6ba4b40f0f5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extend commit log with the glibc culprit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a02927b94a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of avrcp without a2dp is broken since commit
fb9fc969d9:
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/9.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: profiles/audio/bluetoothd-avrcp.o: in function `avrcp_handle_set_volume':
avrcp.c:(.text+0x9c4): undefined reference to `media_transport_update_device_volume'
However, build of a2dp without avrcp is also broken:
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv32-buildroot-linux-gnu/10.2.0/../../../../riscv32-buildroot-linux-gnu/bin/ld: profiles/audio/bluetoothd-media.o: in function `.L50':
media.c:(.text+0x508): undefined reference to `avrcp_unregister_player'
/data/buildroot-autobuilder/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/riscv32-buildroot-linux-gnu/10.2.0/../../../../riscv32-buildroot-linux-gnu/bin/ld: profiles/audio/bluetoothd-media.o: in function `match_endpoint_by_path':
media.c:(.text+0x824): undefined reference to `avrcp_register_player'
Fixes:
- http://autobuild.buildroot.org/results/d54cdfc03212fff772a863d1bc8afd3cfb605831
- http://autobuild.buildroot.org/results/64d75af986a4d6e9c5a176efb6e22046f4d82350
So make a single audio option for a2dp and avrcp
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit aedf2c83d0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BlueZ builds a lot of Classic BT profiles by default but allows
to disable them. This is especially handy when only BLE is needed
and enabled in the kernel.
Otherwise this yields warnings like this on bootup:
profiles/network/bnep.c:bnep_init() kernel lacks bnep-protocol support
src/plugin.c:plugin_init() System does not support network plugin
Also it allows to disable btmon which should not be needed on
production systems and is ~800KB in size.
Expose those options but default to 'y' to no break existing
configurations.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fb9fc969d9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We define _DEFAULT_SOURCE in mkpasswd.c to suppress a compiler warning.
In file included from /usr/include/x86_64-linux-gnu/bits/libc-header-start.h:33,
from /usr/include/stdio.h:27,
from [...]/buildroot/output/arm64/build/host-mkpasswd/mkpasswd.c:24:
/usr/include/features.h:187:3:
187 | # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE"
| ^~~~~~~
As per GLIBC 2.20 release notes[1]:
The _BSD_SOURCE and _SVID_SOURCE feature test macros are no longer
supported; they now act the same as _DEFAULT_SOURCE (but generate a
warning). Except for cases where _BSD_SOURCE enabled BSD interfaces
that conflicted with POSIX (support for which was removed in 2.19),
the interfaces those macros enabled remain available when compiling
with _GNU_SOURCE defined, with _DEFAULT_SOURCE defined, or without
any feature test macros defined.
[1] https://lwn.net/Articles/611162/
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9616ade222)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0cfa165948 (package/pkg-utils.mk: introduce "name" field in
show-info output) did what it said, but did so in the generic show-info
part, thus it was also added to filesystems (rootfs), the other kind of
entity that show-info reports on.
Only packages have a "name"; filesystems do not. Instead, they already
have an 'image_name'.
Move the 'name' field to the package-related part of show-info.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 471ecea5ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The unmatched escaped single-quote lies in the middle of a few
function calls, so they too must be fake-closed to properly fix
colour highlighting in some editors.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit cba51c7f5a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages install nothing in target nor staging, but install images
(like the kernel vmlinux, or a bootloader boot blob...)
If we want to appropriately account for the files installed by each
package, we also need to take images/ into account.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5d00fecb7d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling 'printvars', the 'suitable-host-package' macro is printed
(a macro is just a variable like the others, after all, just with some
parameters). Because it is printed as a variable, it is missing its
parameters, but it still tries to evaluate the $(shell) construct.
This causes spurious warning:
make[1]: support/dependencies/check-host-.sh: Command not found
Only try and call the script if there is actually a tool to check for.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 77304e5143)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the build_dir field is reported relative to $(BASE_DIR), to
avoid leaking local paths.
However, BASE_DIR is not a directory that is very convenient: for
in-tree builds, it is $(CONFIG_DIR)/output/, while for out-of-tree
builds, it is $(CONFIG_DIR). This difference is purely an idiosyncracy
of how out-of-tree builds have been implemented in Buildroot, and is
not under the control of the user.
What the user is in control of, however, is where the .config file is
located. This, really, is the directory we should base relative paths
on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 76c4df324d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-4020: janus-gateway is vulnerable to Improper
Neutralization of Input During Web Page Generation ('Cross-site
Scripting')
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 99d2826e03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As already done for libglib2 in commit
b094f88a4d, fix girdir to avoid the
following build failure with gst1-plugins-base and introspection:
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler gst-libs/gst/tag/GstTag-1.0.gir --output gst-libs/gst/tag/GstTag-1.0.typelib --includedir=/usr/share/gir-1.0
Could not find GIR file 'Gst-1.0.gir'; check XDG_DATA_DIRS or use --includedir
Fixes:
- http://autobuild.buildroot.org/results/d1e2bdde97777ff61c185d375ba412a93e7ca467
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ff420a3195)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
5.14.x is EOL, so no more updates for that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 64cb922db7)
[Peter: drop 5.15.x bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the follownig build failure on ARM big endian raised since bump to
version 3.68 in commit 0a73b9b962:
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha256-armv8.o: In function `SHA256_Compress_Native':
sha256-armv8.c:(.text.SHA256_Compress_Native+0x0): multiple definition of `SHA256_Compress_Native'
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha512.o:sha512.c:(.text.SHA256_Compress_Native+0x0): first defined here
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha256-armv8.o: In function `SHA256_Update_Native':
sha256-armv8.c:(.text.SHA256_Update_Native+0x0): multiple definition of `SHA256_Update_Native'
Linux2.6_aarch64_aarch64_be-linux-gnu-gcc_glibc_PTH_64_DBG.OBJ/Linux_SINGLE_SHLIB/sha512.o:sha512.c:(.text.SHA256_Update_Native+0x0): first defined here
Fixes:
- http://autobuild.buildroot.org/results/237aba0c16a34fec1b0fe50fe08cace438eda1bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3e524755a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't install compile_et as it raises the following build failure with
samba4 since, at least, bump to version 4.14.7 in commit
630e85f8f5:
source4/heimdal/lib/asn1/asn1_err.c:47:23: error: 'link' redeclared as different kind of symbol
47 | static struct et_list link = { 0, 0 };
| ^~~~
In file included from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/bits/sigstksz.h:24,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/signal.h:328,
from /home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/sys/param.h:28,
from ../../lib/replace/../replace/replace.h:659,
from ../../source4/heimdal_build/config.h:10,
from source4/heimdal/lib/asn1/asn1_err.c:1:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/s390x-buildroot-linux-gnu/sysroot/usr/include/unistd.h:819:12: note: previous declaration of 'link' was here
819 | extern int link (const char *__from, const char *__to)
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/d6de6ed59c553f6f413d280f3c65184945bb3850
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dd89074e83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes build on an ARM64 host (and I assume also
other non-x86).
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e938419bd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-3973: vim is vulnerable to Heap-based Buffer Overflow
- Fix CVE-2021-3974: vim is vulnerable to Use After Free
- Fix CVE-2021-3968: vim is vulnerable to Heap-based Buffer Overflow
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5377ff1933)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On a properly setup machine, it is totally useless to use sudo to run
docker; it is very bad practice. Instead, users really should add
themselves to the docker group.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9f6a2dbe03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Pure-FTPd 1.0.49, an incorrect max_filesize quota mechanism in the
server allows attackers to upload files of unbounded size, which may
lead to denial of service or a server hang. This occurs because a
certain greater-than-zero test does not anticipate an initial -1 value.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4fd5d8df2a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU Multiple Precision Arithmetic Library (GMP) through 6.2.1 has an
mpz/inp_raw.c integer overflow and resultant buffer overflow via crafted
input, leading to a segmentation fault on 32-bit platforms.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9d0536d82d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since the addition of
introspection in commit 3915e17e77:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/bin/../riscv32-buildroot-linux-gnu/sysroot/usr/bin/g-ir-compiler -l `/usr/bin/sed -nE "s/^dlname='([A-Za-z0-9.+-]+)'/\1/p" libgee-0.8.la` -o Gee-0.8.typelib Gee-0.8.gir libgee-0.8.la
Could not find GIR file 'GObject-2.0.gir'; check XDG_DATA_DIRS or use --includedir
error parsing file Gee-0.8.gir: Failed to parse included gir GObject-2.0
Fixes:
- http://autobuild.buildroot.org/results/884faa0f84c8dc43ed1ca6cde9caf21c731a4b35
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a4bf020e8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with uboot 2021.10, with upstream commit 473fc279c89 (kconfig /
kbuild: Re-sync with Linux 4.20), the kconfig in uboot now needs the
compiler to detect its features.
Like was done for linux in 3fc990a798 (linux: kconfig needs the
toolchain) and barebox in 1c1a629d81 (boot/barebox: kconfig needs the
toolchain), add the toolchain to the kconfig dependencies of uboot.
Reported-by: Davian on IRC
Reported-by: Xogium on IRC
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c224e7e5c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated on www.pcre.org:
"Note that the former ftp.pcre.org FTP site is no longer available."
Update _SITE URL to Sourceforge.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 236385c50f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do the same as commit "12c01079bd package/stress-ng: bump to version
0.13.05" did for 2022.02 but without the version bump.
The project URL returns 404 error because:
Quoting Coling King:
"Unfortunately when I left Canonical last week they removed my tarballs"
So use github and update hash.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Ricardo: do not bump the version.
There will be no version clash at sources.buildroot.net since the file
format changed]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current stretch image we are using on the maintenance branches still
has the old Let's Encrypt certificate that expired a few weeks ago,
causign a lot of download errors:
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following per-package build failure with apache:
/home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/aarch64-buildroot-linux-gnu/sysroot/usr/bin/../../usr/build-1/libtool --silent --mode=link /home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/bin/aarch64-linux-gcc -o mod_apparmor.la -rpath /usr/modules -module -avoid-version mod_apparmor.lo -L/home/buildroot/autobuild/instance-3/output-1/per-package/apparmor/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib -lapparmor
/home/buildroot/autobuild/instance-3/output-1/per-package/apache/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-buildroot-linux-gnu/9.3.0/../../../../aarch64-buildroot-linux-gnu/bin/ld: cannot find /lib64/libc.so.6
This build failure is raised because the fix added by commit
3c836e5420 was incomplete as the apr
special libtool script was not patched (see commit
b747c29c4e for a detailled explanation)
Fixes:
- http://autobuild.buildroot.org/results/6747b1cb11b129ea4bcb1ecc9645e94fb8e095e8
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8bd40a0303)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The server does not support TLS v1.2, causing dowloads to fall back to
sources.buildroot.net. Mail sent to the project owner bounces, so it
looks like this issue will not be solved anytime soon.
Switch to HTTP, like was done in commit 399ad854cc (package/mksh:
fix project URL in Config.in) for the homepage, and rely on our hashes
to verify the integrity and authenticity of the download.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: slight rewording in the commit message]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0e83706aa1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when BR2_LINUX_KERNEL_INSTALL_TARGET=y is selected, issuing
a "saveenv" command in the U-Boot prompt may lead to rootfs corruption.
When BR2_LINUX_KERNEL_INSTALL_TARGET is not selected, then
board/freescale/common/imx/genimage.cfg.template is used as per the logic
inside board/freescale/common/imx/post-image.sh.
board/freescale/common/imx/genimage.cfg.template correctly puts the
rootfs at a safe offset.
With BR2_LINUX_KERNEL_INSTALL_TARGET=y, then
board/freescale/common/imx/genimage.cfg.template_no_boot_part or
board/freescale/common/imx/genimage.cfg.template_no_boot_part_spl
are used and no offset to the rootfs is given, which may cause U-Boot
environment area to write into the rootfs area, causing the rootfs
corruption.
Avoid this problem by placing the rootfs at an 8MB offset, just like
it is done in board/freescale/common/imx/genimage.cfg.
Tested on a imx6qp-wandboard and also on a custom imx6ull based board.
"saveenv" does not corrupt the rootfs anymore after this change.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0351a60b95)
[Peter: drop genimage.cfg.template_no_boot_part change, not in 2021.02.x]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
genrandconfig is used by the Buildroot autobuilders to generate
semi-random configurations that we build test. As part of this, we use
"make randpackageconfig" to randomize the selection of packages,
together with a KCONFIG_PROBABILITY value, which indicates the
probabibility for each option to be enabled. This probability is
itself randomized, between 1% and 30% for every build.
However, with our increasing number of packages (over 2900), when we
use a 30% probability for options to be enabled, it means a *lot* of
options are enabled, causing very large configurations to be
tested. These configurations are not very realistic, and they take
ages to build on our autobuilders: we have builds that take 4, 5 or
even 7 hours to build.
In order to test a larger number of configurations and therefore a
larger variety of configurations, this commit reduces the maximum
probability to 20%.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0e64537917)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add myself as co-maintainer of SMCRoute in Buildroot, handy since I'm
the upstream maintainer anyway.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 96e2fccd9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The heuristic to extract the various variables of interest is pretty
crude: we filter on variables ending with certain suffixes (like
'%_VERSION' to get the version strings).
However, in doing so, we may dump variables that are not actual package
versions (especially with br2-external trees), and those may contain one
or more equal sign. And anyway, an actual package version string may
very well contain an equal sign too.
But the current situation is that the output of 'printvars' is split on
all equal signs, which will not fit in the 2-tuple we assign the result,
thus causing an exception.
Fix that by limiting to a single split.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b919d5dbba)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9c068b4be8 (package/glmark2: fix wayland build) extended the set
of required libraries for various "flavor" options by selecting those
libraries from the blind options.
However, those blind options are true as soon as their requirements are
met (the depends on), even when glmark2 itself is not enabled.
This means that extra libraries are pulled in to the build, even when
not required.
We fix that by moving the actual selects to the main symbol, along with
the proper conditions. This means that we have two lines that select
wayland-protocols, under two different conditions; we could make that a
single select, but the condition would need to be on two lines anyway,
so meh...
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4a36af9450)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-3928: vim is vulnerable to Stack-based Buffer Overflow
- Drop patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9f42504d6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently when a tag is added to the Buildroot git tree, the gitlab-ci
create a pipeline with several hundred of jobs (~750) to build all
defconfigs and execute the Buildroot testsuite.
However, there is only a limited number of gitlab-ci runner (9 runners)
and some jobs reach the timeout limit (24h) while waiting for a runner
[1]. Indeed, the Buildroot project doesn't use the Gitlab's shared
runners.
In addition to the pipeline created when a new tag is added to the
git repository, two pipelines are created each weeks to execute the
Buildroot testsuite (on monday [2]) and build all defconfigs (on
Thursday [3]).
At some point there are too many jobs waiting in gitlab due board
defconfigs builds. Indded a board defconfig requires a lot of time
(~30min) compared to other jobs in order to build a toolchain and a
kernel linux along with a basic rootfs. There is currently 262
defconfigs.
This is even worse when several pipelines are trigged at the same
time (new git tag and scheduled pipeline trigger).
In order to reduce the number of long jobs, don't build board
defconfigs with pipelines trigged on tag, keeping only the runtime
tests and the Qemu's defconfigs.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/1758966541
[2] https://gitlab.com/buildroot.org/buildroot/-/pipelines/404035190
[3] https://gitlab.com/buildroot.org/buildroot/-/pipelines/401685550
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8ea6eead60)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't want to allow meson to download wrap dependencies as this
bypasses buildroot's dependency resolution.
This is badly documented in the meson manual, but there is at least
an FAQ that refers to it:
https://mesonbuild.com/FAQ.html#does-wrap-download-sources-behind-my-back
Meson has a option called wrap-mode which can be used to disable
wrap downloads altogether with --wrap-mode=nodownload.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add pointer to FAQ]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 12ba356365)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dahdi-linux needs a linux with CRC CCITT since the addition of the
package in commit d959966b41 as stated in
the README:
- CONFIG_CRC_CCITT must be enabled ('y' or 'm'). On 2.6 kernels this can
be selected These can be selected from the "Library Routines" submenu
during kernel configuration via "make menuconfig".
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b22ec4bd95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-40114: Multiple Cisco products are affected by a
vulnerability in the way the Snort detection engine processes ICMP
traffic that could allow an unauthenticated, remote attacker to cause a
denial of service (DoS) condition on an affected device. The
vulnerability is due to improper memory resource management while the
Snort detection engine is processing ICMP packets. An attacker could
exploit this vulnerability by sending a series of ICMP packets through
an affected device. A successful exploit could allow the attacker to
exhaust resources on the affected device, causing the device to reload.
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snort-dos-s2R7W9UUhttps://www.snort.org/downloads/snort/changelog_2.9.18.1.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5afa2320ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenJDK 17 is a new LTS release, which leaves the Buildroot Config option of
"LTS" and "LATEST" as a misnomer because both 11 and 17 are LTS releases.
There are two options in this case:
1) Remove "LATEST" and update OpenJDK 11 to 17, and only support 17.
2) Change "LTS" to "11" and "LATEST" to "17" and only support the latest 2 LTS
OpenJDK releases.
After some discussion with Thomas Petazzoni and Peter Korsgaard, and testing,
option 2 is the best course of action for a few reasons:
- OpenJDK 11 and 17 have very long support cycles:
- OpenJDK 11 has two years of Active and five years of security support left.
- OpenJDK 17 has five years of Active and ten years of security support left.
- Both OpenJDK versions build with the same parameters.
- The maintenance cost of both versions is meager.
- Both versions pass tests.package.test_openjdk without issue.
Changes:
- Change BR2_OPENJDK_VERSION_LATEST -> BR2_OPENJDK_VERSION_17
- Change BR2_OPENJDK_VERSION_LTS -> BR2_OPENJDK_VERSION_11
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Peter: add Config.in.legacy, use BR2_PACKAGE_OPENJDK_ prefix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a610bf9967)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.16.10 (released 2021-11-04) includes security fixes to the archive/zip
and debug/macho packages, as well as bug fixes to the compiler, linker,
runtime, the misc/wasm directory, and to the net/http package.
https://golang.org/doc/devel/release#go1.16.minor
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Giulio Benetti to all Olimex Allwinner boards' defconfigs since I've
recently updated and tested them all and I'd like to receive possible
build failure from gitlab CI/CD.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1b31b4b9ce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit
40bb37bd70 ("utils/getdeveloperlib.py:
use relative paths for files"), the Developer class was changed to use
relative paths, including for its .hasfile() method.
However the check_developers() function of getdeveloperlib.py was not
updated accordingly, and continued to pass absolute paths. This caused
"get-developers -c" to return the entire list of files in Buildroot as
being unmaintained, as none of them were matching the file listed in
the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 79cba4056b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3.x, check_output() returns a "bytes" array, and not a
string. Its result needs to be decoded to be turned into a
string. Without this fix, "get-developers -c" bails out with:
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./utils/get-developers", line 105, in <module>
__main__()
File "/home/thomas/projets/buildroot/./utils/get-developers", line 53, in __main__
files = getdeveloperlib.check_developers(devs)
File "/home/thomas/projets/buildroot/utils/getdeveloperlib.py", line 280, in check_developers
files = subprocess.check_output(cmd).strip().split("\n")
TypeError: a bytes-like object is required, not 'str'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 53da6a7c05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current documentation was poorly organized, with for example the
"Here is an example walk through of running a test case" sentence
followed by the explanation of how to list available test cases, but
not how to run one.
Many other aspects of the wording were confusing, or not really
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a9dc2de551)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current Gitlab CI mechanism allows to trigger all tests in a CI
pipeline by pushing a branch named <something>-runtime-tests, or to
trigger a single test in a CI pipeline by pushing a branch name
<something>-tests.<name of test>.
However, there are cases where it is useful to run a suite of tests,
for example to run all tests in tests.init.test_busybox.
This commit makes that possible by extending the current semantic of
<something>-tests.<name of test> to not expect a complete test name,
but instead to accept all tests that starts with the given pattern.
This allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox.TestInitSystemBusyboxRo
like it was the case before. But it now also allows to do:
git push gitlab HEAD:foobar-tests.init.test_busybox
to run all Busybox tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 23186356a1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The directory that containts tests is "support/testing/tests/", not
"supporting/testing/test".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 18bbeefb99)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
output/build/pango-1.48.10/meson.build:1:0: ERROR: Unknown options: "use_fontconfig"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 15a7be2c12)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
output/build/gst1-vaapi-1.18.5/meson.build:1:0: ERROR: Unknown options: "test"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d352ae7121)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
output/build/gst1-plugins-ugly-1.18.5/meson.build:1:0: ERROR: Unknown options: "examples"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c98ca5f44f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix teletextdec name and remove vdpau which is no longer available.
Fixes:
output/build/gst1-plugins-bad-1.18.5/meson.build:1:0: ERROR: Unknown options: "teletextdec, vdpau"
(WARNING for now, but will be an error in meson 0.60.0).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 87505ba947)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the update of gpsd to 3.21, olsr was failing to build with:
src/gpsdclient.c: In function 'nmeaInfoFromGpsd':
src/gpsdclient.c:373:14: error: 'struct gps_data_t' has no member named 'status'
373 | if (gpsdata->status == STATUS_NO_FIX) {
| ^~
This is due to an API change in gpsd. This commit fixes that by
backporting an upstream commit from olsr.
Fixes:
http://autobuild.buildroot.net/results/d8c5564b24ff5b646cdd786d07b3a45ce5fa01ea/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ddd0330fe1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2021-27347: Use after free in lzma_decompress_buf function in
stream.c in Irzip 0.631 allows attackers to cause Denial of Service
(DoS) via a crafted compressed file.
- Fix CVE-2021-27345: A null pointer dereference was discovered in
ucompthread in stream.c in Irzip 0.631 which allows attackers to cause
a denial of service (DOS) via a crafted compressed file.
- Fix CVE-2020-25467: A null pointer dereference was discovered
lzo_decompress_buf in stream.c in Irzip 0.621 which allows an attacker
to cause a denial of service (DOS) via a crafted compressed file.
- lz4 is a mandatory dependency since version 0.640 and
https://github.com/ckolivas/lrzip/commit/3345a239b7f5353a1c1296d6a5d6b90729d4b669https://github.com/ckolivas/lrzip/compare/7f3bf46203bf45ea115d8bd9f310ea219be88af4...v0.641
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3332c143c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2021-21703: n PHP versions 7.3.x up to and including 7.3.31, 7.4.x
below 7.4.25 and 8.0.x below 8.0.12, when running PHP FPM SAPI with main
FPM daemon process running as root and child worker processes running as
lower-privileged users, it is possible for the child processes to access
memory shared with the main process and write to it, modifying it in a way
that would cause the root process to conduct invalid memory reads and
writes, which can be used to escalate privileges from local unprivileged
user to the root user.
For more details, see https://www.ambionics.io/blog/php-fpm-local-roothttps://www.php.net/ChangeLog-7.php#7.4.25
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-22959: HTTP Request Smuggling due to spaced in headers (Medium)
The http parser accepts requests with a space (SP) right after the header
name before the colon. This can lead to HTTP Request Smuggling (HRS).
- CVE-2021-22960: HTTP Request Smuggling when parsing the body (Medium)
The http parser ignores chunk extensions when parsing the body of chunked
requests. This leads to HTTP Request Smuggling (HRS) under certain
conditions.
For more details, see the advisory:
https://nodejs.org/en/blog/vulnerability/oct-2021-security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- disable doc generation (via sphinx) for host build
Reduces host-qemu build time from (on a system with sphinx installed):
real 2m5,522s
user 9m41,292s
sys 1m9,732s
to:
real 1m9,183s
user 8m40,131s
sys 1m9,533s
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit df857f6e0f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
16.15.0:
- ASTERISK-29057: pjsip: Crash on call rejection during high load
16.15.1:
- AST-2020-003: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP message is received that has a
History-Info header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-003.pdf
- AST-2020-004: Remote crash in res_pjsip_diversion
A crash can occur in Asterisk when a SIP 181 response is received that has
a Diversion header, which contains a tel-uri.
https://downloads.asterisk.org/pub/security/AST-2020-004.pdf
16.16.0:
- ASTERISK-29219: res_pjsip_diversion: Crash if Tel URI contains History-Info
16.16.1:
- AST-2021-001: Remote crash in res_pjsip_diversion
If a registered user is tricked into dialing a malicious number that sends
lots of 181 responses to Asterisk, each one will cause a 181 to be sent
back to the original caller with an increasing number of entries in the
“Supported” header. Eventually the number of entries in the header
exceeds the size of the entry array and causes a crash.
https://downloads.asterisk.org/pub/security/AST-2021-001.pdf
- AST-2021-002: Remote crash possible when negotiating T.38
When re-negotiating for T.38 if the initial remote response was delayed
just enough Asterisk would send both audio and T.38 in the SDP. If this
happened, and the remote responded with a declined T.38 stream then
Asterisk would crash.
https://downloads.asterisk.org/pub/security/AST-2021-002.pdf
- AST-2021-003: Remote attacker could prematurely tear down SRTP calls
An unauthenticated remote attacker could replay SRTP packets which could
cause an Asterisk instance configured without strict RTP validation to
tear down calls prematurely.
https://downloads.asterisk.org/pub/security/AST-2021-003.pdf
- AST-2021-004: An unsuspecting user could crash Asterisk with multiple
hold/unhold requests
Due to a signedness comparison mismatch, an authenticated WebRTC client
could cause a stack overflow and Asterisk crash by sending multiple
hold/unhold requests in quick succession.
https://downloads.asterisk.org/pub/security/AST-2021-004.pdf
- AST-2021-005: Remote Crash Vulnerability in PJSIP channel driver
Given a scenario where an outgoing call is placed from Asterisk to a
remote SIP server it is possible for a crash to occur.
https://downloads.asterisk.org/pub/security/AST-2021-005.pdf
16.16.2:
- AST-2021-006: Crash when negotiating T.38 with a zero port
When Asterisk sends a re-invite initiating T.38 faxing and the endpoint
responds with a m=image line and zero port, a crash will occur in
Asterisk.
This is a reoccurrence of AST-2019-004.
https://downloads.asterisk.org/pub/security/AST-2021-006.pdf
16.17.0:
- ASTERISK-29203 / AST-2021-002 — Another scenario is causing a crash
- ASTERISK-29260: sRTP Replay Protection ignored; even tears down long calls
- ASTERISK-29227: res_pjsip_diversion: sending multiple 181 responses causes
memory corruption and crash
16.19.1:
- AST-2021-007: Remote Crash Vulnerability in PJSIP channel driver
When Asterisk receives a re-INVITE without SDP after having sent a BYE
request a crash will occur. This occurs due to the Asterisk channel no
longer being present while code assumes it is.
https://downloads.asterisk.org/pub/security/AST-2021-007.pdf
- AST-2021-008: Remote crash when using IAX2 channel driver
If the IAX2 channel driver receives a packet that contains an unsupported
media format it can cause a crash to occur in Asterisk.
https://downloads.asterisk.org/pub/security/AST-2021-008.pdf
- AST-2021-009: pjproject/pjsip: crash when SSL socket destroyed during
handshake
Depending on the timing, it’s possible for Asterisk to crash when using a
TLS connection if the underlying socket parent/listener gets destroyed
during the handshake.
https://downloads.asterisk.org/pub/security/AST-2021-009.pdf
16.20.0:
- ASTERISK-29415: Crash in PJSIP TLS transport
- ASTERISK-29381: chan_pjsip: Remote denial of service by an authenticated
user
In addition, a large number of bugfixes.
Drop now upstreamed
0006-AC_HEADER_STDC-causes-a-compile-failure-with-autoconf-2-70.patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 289a15f33b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Workaround for gcc bug 68485 doesn't work anymore since bump to version
3.21 in commit 5b3e721399 because CXXFLAGS
is appended after CFLAGS and does not contain -O0:
/tmp/instance-7/output-1/host/bin/microblazeel-linux-gcc -o rtcm2_json.os -c --sysroot=/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot -pthread -Wall -Wcast-align -Wextra -Wimplicit-fallthrough -Wmissing-declarations -Wmissing-prototypes -Wno-missing-field-initializers -Wno-uninitialized -Wpointer-arith -Wreturn-type -Wstrict-prototypes -Wvla -O0 -Os -g0 -pthread -fPIC -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/include/dbus-1.0 -I/tmp/instance-7/output-1/host/microblazeel-buildroot-linux-uclibc/sysroot/usr/lib/dbus-1.0/include rtcm2_json.c
during RTL pass: reload
rtcm2_json.c: In function ‘json_rtcm2_read’:
rtcm2_json.c:267:1: internal compiler error: in gen_reg_rtx, at emit-rtl.c:1155
267 | }
| ^
It should be noted that GPSD_CXXFLAGS was added 5 years ago with commit
b4c050e9af but was not actually used in
that commit or any later.
Fixes:
- http://autobuild.buildroot.org/results/fab33f25b08fa218af91640fdbd8c0dcf1d07228
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 922cd6f64c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add option that enables gpsd python support including modules, tools,
and gpsfake test harness. If python is enabled then install python
modules unconditionally. Note that gpsd python modules run compatibly
under Python 2 and 3.x for x >= 2. So enable gpsd python support when
any Python version is enabled in board configuration. If no Python is
enabled, but gpsd Python support is requested, then select Python 3.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[yann.morin.1998@free.fr: fix check-package]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f3ef0723cf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update gpsd to latest release v3.21:
- bump version
- update checksums
- remove patch for v3.20: it is not needed for v3.21
- remove obsolete options and add them to Config.in.legacy
Signed-off-by: Olivier Dautricourt <olivier.dautricourt@orolia.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 5b3e721399)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pkg-stats script queries release-monitoring.org to find the latest
upstream versions of our packages. However, up until recently,
release-monitoring.org had no notion of stable
vs. development/release-candidate versions, so for some packages the
"latest" version was in fact a development/release-candidate version
that we didn't want to package in Buildroot.
However, in recent time, release-monitoring.org has gained support for
differentiating stable vs. development releases of upstream
projects. See for example
https://release-monitoring.org/project/10024/ for the glib library,
which has a number of versions marked "Pre-release".
The JSON blurb returned by release-monitoring.org has 3 relevant
fields:
- "version", which we are using currently, which is a string
containing the reference of the latest version, including
pre-release.
- "versions", which is an array of strings listing all versions,
pre-release or not.
- "stable_versions", which is an array of string listing only
non-pre-release versions. It is ordered newest first to oldest
last.
So, this commit changes from using 'version' to using
'stable_versions[0]'.
As an example, before this change, pkg-stats reports that nfs-utils
needs to be bumped to 2.5.5rc3, while after this patch, it reports
that nfs-utils is already at 2.5.4, and that this is the latest stable
version (modulo an issue where Buildroot has 2.5.4 and
release-monitoring.org has 2-5-4, this will be addressed separately).
Note that part of this change was already done in commit f7b0e0860, but
it was incomplete.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 11efcb39b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pkg-stats scripts tries to match packages against
release-monitoring.org in two ways:
- First by using the "Buildroot" distribution registered on
release-monitoring.org, in which we have added a lot of mappings
between Buildroot package names and release-monitoring.org package
names. If there is a match using this distribution, the package
status is RM_API_STATUS_FOUND_BY_DISTRO, which means that the
resulting HTML has a "found by distro" statement.
- Then, if the first solution didn't work, by using the pattern
matching, as done in the check_package_get_latest_version_by_guess()
function.
However, there is a bug in this later case: it sets the package status
to RM_API_STATUS_FOUND_BY_DISTRO as well, while it should have been
RM_API_STATUS_FOUND_BY_PATTERN. Due to this bug, in the resulting HTML
file from a pkg-stats run, all packages are marked as "found by
distro" even the ones that are "found by guess".
This commit fixes that by setting the correct package status.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9602fd94e7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For example with libpng: 1.6.37 instead of 1.7.0beta89
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: coalesce into a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f7b0e08605)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2021-41089: Create parent directories inside a chroot during docker
cp to prevent a specially crafted container from changing permissions of
existing files in the host’s filesystem.
- CVE-2021-41091: Lock down file permissions to prevent unprivileged users
from discovering and executing programs in /var/lib/docker.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ce45136df0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2021-41092: Ensure default auth config has address field set, to
prevent credentials being sent to the default registry.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d53c702419)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On Linux version >= 4.20 in order to have mali working we need to pass
drm_kms_helper.drm_leak_fbdev_smem=1 and at least
drm_kms_helper.drm_fbdev_overalloc=200 to have a double buffer fbdev.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 97408545ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-32765: Hiredis is a minimalistic C client library for the
Redis database. In affected versions Hiredis is vulnurable to integer
overflow if provided maliciously crafted or corrupted `RESP` `mult-bulk`
protocol data. When parsing `multi-bulk` (array-like) replies, hiredis
fails to check if `count * sizeof(redisReply*)` can be represented in
`SIZE_MAX`. If it can not, and the `calloc()` call doesn't itself make
this check, it would result in a short allocation and subsequent buffer
overflow.
https://github.com/redis/hiredis/blob/v1.0.2/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9e092ba253)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding the Image format on the Qemu command line avoid this warning:
"WARNING: Image format was not specified for 'output/TestUbi/images/rootfs.ubi' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions."
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1ab2dd6aa5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding myself as co-maintainer of libuev alongside Peter Seiderer, his
initiative, and I am the upstream so seems logical.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 541fb5b581)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since v0.8 a script 'dfuse-pack.py' is part of the package, which has a
different license.
Fixes: c212a90b61 ("package/dfu-util: bump version to 0.8, add hash, fix SITE url")
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit efef1974c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DFU 1.1 specification is also supported.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit ddafea9c80)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Testing buildroot 2021.05 I observed that after first
boot I was having the following folders:
/context:
/system_u:object_r:auditd_log_t
The root of this problem turned to be a difference in the
output of $(selabel_lookup -b file -k /var/log/audit) called
by S02auditd that from this version on looks like:
$ selabel_lookup -b file -k /var/log/audit
Default context: system_u:object_r:auditd_log_t
This patch will cut it to retrieve the type piece only. Unfortunately,
audit has no options to create machine-readable output that is
guaranteed not to change, so that's the best we can do.
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e47832c860)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/i586-buildroot-linux-musl/9.3.0/../../../../i586-buildroot-linux-musl/bin/ld: gdbsupport/tdesc-ipa.o: in function `print_xml_feature::visit(tdesc_type_builtin const*)':
/home/buildroot/autobuild/instance-2/output-1/build/gdb-10.2/build/gdbserver/../../gdbserver/../gdbsupport/tdesc.cc:310: undefined reference to `libintl_gettext'
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Peter Korsgaard