Update for 2014.08-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES

@@ -1,3 +1,21 @@
+2014.08-rc3, Released August 26th, 2014
+
+	Minor fixes.
+
+	User manual update / restructuring.
+
+	Updated/fixed packages: cairo, ecryptfs-utils, gettext,
+	gstreamer, gstreamer1, gutenprint, icu, imagemagick, jack2,
+	lbreakout2, libevas-generic-loaders, libftdi, libinput,
+	libtorrent, ltris, msgpack, ntp, php, procps-ng, pulseaudio,
+	thrift, tvheadend, usb_modeswitch, xmlstarlet,
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7136: ecryptfs-utils needs gettext to run when glibc/eglibc...
+	#7322: libgomp dependency issue with imagemagick
+	#7328: Git dl of versions in x/y broken
+
 2014.08-rc2, Released August 18th, 2014
 
 	Fixes all over the tree.

Makefile

@@ -25,7 +25,7 @@
 #--------------------------------------------------------------
 
 # Set and export the version string
-export BR2_VERSION := 2014.08-rc2
+export BR2_VERSION := 2014.08-rc3
 
 # Check for minimal make version (note: this check will break at make 10.x)
 MIN_MAKE_VERSION = 3.81

arch/Config.in

@@ -250,6 +250,10 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	string
 
+# If the architecture has atomic operations, select this:
+config BR2_ARCH_HAS_ATOMICS
+	bool
+
 # Set up target binary format
 choice
 	prompt "Target Binary Format"

arch/Config.in.aarch64

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.arc

@@ -1,7 +1,7 @@
 # Choise of atomic instructions presence
 config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
-	select BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	select BR2_ARCH_HAS_ATOMICS
 
 config BR2_ARCH
 	default "arc"	if BR2_arcle

arch/Config.in.arm

@@ -340,6 +340,9 @@ config BR2_ENDIAN
 	default "LITTLE" if BR2_arm
 	default "BIG"	 if BR2_armeb
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default "arm920"	if BR2_arm920
 	default "arm920t"	if BR2_arm920t

arch/Config.in.avr32

@@ -6,3 +6,6 @@ config BR2_ENDIAN
 
 config BR2_GCC_TARGET_ARCH
 	default "ap"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.bfin

@@ -68,6 +68,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default bf606		if BR2_bf606
 	default bf607		if BR2_bf607

arch/Config.in.m68k

@@ -4,6 +4,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_TUNE
 	default "68000"		if BR2_m68k_68000
 	default "68010"		if BR2_m68k_68010

arch/Config.in.microblaze

@@ -9,3 +9,6 @@ config BR2_ENDIAN
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.mips

@@ -73,6 +73,9 @@ config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
 	default "BIG" 	    	if BR2_mips || BR2_mips64
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_ARCH
 	default "mips1"		if BR2_mips_1
 	default "mips2"		if BR2_mips_2

arch/Config.in.nios2

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.powerpc

@@ -157,6 +157,9 @@ config BR2_ENDIAN
 	default "BIG"    if BR2_powerpc || BR2_powerpc64
 	default "LITTLE" if BR2_powerpc64le
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_TUNE
 	default "401"		if BR2_powerpc_401
 	default "403"		if BR2_powerpc_403

arch/Config.in.sh

@@ -28,3 +28,6 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.sparc

@@ -23,6 +23,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_TUNE
 	default "v8"		if BR2_sparc_v8
 

arch/Config.in.x86

@@ -202,6 +202,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y if !BR2_x86_i386
+
 config BR2_GCC_TARGET_TUNE
 	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486

arch/Config.in.xtensa

@@ -35,3 +35,6 @@ config BR2_XTENSA_OVERLAY_DIR
 
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

docs/download.html

@@ -15,14 +15,14 @@ or
 
 <p>
 
-The latest release candidate is <b>2014.08-rc2</b>, which can be
+The latest release candidate is <b>2014.08-rc3</b>, which can be
 downloaded here:<p>
 
-<a href="/downloads/buildroot-2014.08-rc2.tar.gz">buildroot-2014.08-rc2.tar.gz</a>
-(<a href="/downloads/buildroot-2014.08-rc2.tar.gz.sign">PGP signature</a>)
+<a href="/downloads/buildroot-2014.08-rc3.tar.gz">buildroot-2014.08-rc3.tar.gz</a>
+(<a href="/downloads/buildroot-2014.08-rc3.tar.gz.sign">PGP signature</a>)
 or
-<a href="/downloads/buildroot-2014.08-rc2.tar.bz2">buildroot-2014.08-rc2.tar.bz2</a>
-(<a href="/downloads/buildroot-2014.08-rc2.tar.bz2.sign">PGP signature</a>).
+<a href="/downloads/buildroot-2014.08-rc3.tar.bz2">buildroot-2014.08-rc3.tar.bz2</a>
+(<a href="/downloads/buildroot-2014.08-rc3.tar.bz2.sign">PGP signature</a>).
 <p>
 
 This and earlier releases (and their PGP signatures) can always be downloaded from

docs/manual/adding-packages-directory.txt

@@ -219,6 +219,11 @@ use in the comment.
 ** Dependency symbol: +BR2_USE_MMU+
 ** Comment string: no comment to be added
 
+* Atomic instructions (whereby the architecture has instructions to
+  perform some operations atomically, like LOCKCMPXCHG on x86)
+** Dependency symbol: +BR2_ARCH_HAS_ATOMICS+
+** Comment string: no comment to be added
+
 * Kernel headers
 ** Dependency symbol: +BR2_TOOLCHAIN_HEADERS_AT_LEAST_X_Y+, (replace
    +X_Y+ with the proper version, see +toolchain/toolchain-common.in+)

docs/manual/adding-packages-gettext.txt

@@ -8,15 +8,22 @@ library. Dependencies for this library are fairly complicated and
 therefore, deserve some explanation.
 
 The 'uClibc' C library doesn't implement gettext functionality;
-therefore with this C library, a separate gettext must be compiled. On
-the other hand, the 'glibc' C library does integrate its own gettext,
-and in this case the separate gettext library should not be compiled,
-because it creates various kinds of build failures.
+therefore with this C library, a separate gettext must be compiled,
+which is provided by the additional +libintl+ library, part of the
++gettext+ package.
+
+On the other hand, the 'glibc' C library does integrate its own
+gettext library functions, so it is not necessary to build a separate
++libintl+ library.
+
+However, certain packages need some gettext utilities on the target,
+such as the +gettext+ program itself, which allows to retrieve
+translated strings, from the command line.
 
 Additionally, some packages (such as +libglib2+) do require gettext
-unconditionally, while other packages (those who support
-+--disable-nls+ in general) only require gettext when locale support
-is enabled.
+functions unconditionally, while other packages (in general, those who
+support +--disable-nls+) only require gettext functions when locale
+support is enabled.
 
 Therefore, Buildroot defines two configuration options:
 
@@ -44,3 +51,11 @@ should:
 * use +$(if $(BR2_NEEDS_GETTEXT),gettext)+ in the package
   +DEPENDENCIES+ variable in the +.mk+ file.
 
+Packages that need the +gettext+ utilities on the target (should be
+rare) should:
+
+* use +select BR2_PACKAGE_GETTEXT+ in their +Config.in+ file,
+  indicating in a comment above that it's a runtime dependency only.
+
+* not add any +gettext+ dependency in the +DEPENDENCIES+ variable of
+  their +.mk+ file.

docs/manual/common-usage.txt

@@ -1,7 +1,9 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-== Daily use
+== General Buildroot usage
+
+include::make-tips.txt[]
 
 include::rebuilding-packages.txt[]
 
@@ -262,3 +264,7 @@ only other format supported is PNG:
 ----------------
 BR2_GRAPH_OUT=png make graph-build
 ----------------
+
+include::eclipse-integration.txt[]
+
+include::advanced.txt[]

docs/manual/configure-other-components.txt

@@ -0,0 +1,52 @@
+// -*- mode:doc; -*-
+// vim: set syntax=asciidoc:
+
+== Configuration of other components
+
+Before attempting to modify any of the components below, make sure you
+have already configured Buildroot itself, and have enabled the
+corresponding package.
+
+BusyBox::
++
+If you already have a BusyBox configuration file, you can directly
+specify this file in the Buildroot configuration, using
++BR2_PACKAGE_BUSYBOX_CONFIG+. Otherwise, Buildroot will start from a
+default BusyBox configuration file.
++
+To make subsequent changes to the configuration, use +make
+busybox-menuconfig+ to open the BusyBox configuration editor.
++
+It is also possible to specify a BusyBox configuration file through an
+environment variable, although this is not recommended. Refer to
+xref:env-vars[] for more details.
+
+uClibc::
++
+Configuration of uClibc is done in the same way as for BusyBox.  The
+configuration variable to specify an existing configuration file is
++BR2_UCLIBC_CONFIG+. The command to make subsequent changes is +make
+uclibc-menuconfig+.
+
+Linux kernel::
++
+If you already have a kernel configuration file, you can directly
+specify this file in the Buildroot configuration, using
++BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG+.
++
+If you do not yet have a kernel configuration file, you can either start
+by specifying a defconfig in the Buildroot configuration, using
++BR2_LINUX_KERNEL_USE_DEFCONFIG+, or start by creating an empty file and
+specifying it as custom configuration file, using
++BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG+.
++
+To make subsequent changes to the configuration, use +make
+linux-menuconfig+ to open the Linux configuration editor.
+
+Barebox::
++
+Configuration of Barebox is done in the same way as for the Linux
+kernel. The corresponding configuration variables are
++BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG+ and
++BR2_TARGET_BAREBOX_USE_DEFCONFIG+. To open the configuration editor,
+use +make barebox-menuconfig+.

docs/manual/configure.txt

@@ -2,12 +2,27 @@
 // vim: set syntax=asciidoc:
 
 [[configure]]
-== Details on Buildroot configuration
+== Buildroot configuration
 
 All the configuration options in +make *config+ have a help text
-providing details about the option. However, a number of topics
-require additional details that cannot easily be covered in the help
-text and are there covered in the following sections.
+providing details about the option.
+
+The +make *config+ commands also offer a search tool. Read the help
+message in the different frontend menus to know how to use it:
+
+* in _menuconfig_, the search tool is called by pressing +/+;
+* in _xconfig_, the search tool is called by pressing +Ctrl+ + +f+.
+
+The result of the search shows the help message of the matching items.
+In _menuconfig_, numbers in the left column provide a shortcut to the
+corresponding entry. Just type this number to directly jump to the
+entry, or to the containing menu in case the entry is not selectable due
+to a missing dependency.
+
+Although the menu structure and the help text of the entries should be
+sufficiently self-explanatory, a number of topics require additional
+explanation that cannot easily be covered in the help text and are
+therefore covered in the following sections.
 
 === Cross-compilation toolchain
 
@@ -215,6 +230,20 @@ Drawbacks of this backend:
   fix from the toolchain vendor, unless you build your external
   toolchain by yourself using Crosstool-NG.
 
+===== External toolchain wrapper
+
+When using an external toolchain, Buildroot generates a wrapper program,
+that transparently passes the appropriate options (according to the
+configuration) to the external toolchain programs. In case you need to
+debug this wrapper to check exactly what arguments are passed, you can
+set the environment variable +BR2_DEBUG_WRAPPER+ to either one of:
+
+* +0+, empty or not set: no debug
+
+* +1+: trace all arguments on a single line
+
+* +2+: trace one argument per line
+
 === /dev management
 
 On a Linux system, the +/dev+ directory contains special files, called

docs/manual/customize-busybox-config.txt

@@ -1,26 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-[[busybox-custom]]
-=== Customizing the BusyBox configuration
-
-http://www.busybox.net/[BusyBox] is very configurable, and you may
-want to customize it. You can follow these simple steps to do so. This
-method isn't optimal, but it's simple, and it works:
-
-* Do an initial compilation of Buildroot, with busybox, without
-  trying to customize it.
-
-* Invoke +make busybox-menuconfig+.
-  The nice configuration tool appears, and you can
-  customize everything.
-
-* Run the compilation of Buildroot again.
-
-Otherwise, you can simply change the
-+package/busybox/busybox-<version>.config+ file, if you know the
-options you want to change, without using the configuration tool.
-
-If you want to use an existing config file for busybox, then see
-xref:env-vars[].
-

docs/manual/customize-kernel-config.txt

@@ -1,15 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-[[kernel-custom]]
-=== Customizing the Linux kernel configuration
-
-The Linux kernel configuration can be customized just like
-xref:busybox-custom[BusyBox] and xref:uclibc-custom[uClibc] using
-+make linux-menuconfig+. Make sure you have enabled the kernel build
-in +make menuconfig+ first. Once done, run +make+ to (re)build
-everything.
-
-If you want to use an existing config file for Linux, then see
-xref:env-vars[].
-

docs/manual/customize-store.txt

@@ -1,8 +1,8 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-[[customize-store]]
-== Storing the configuration
+[[customize-store-basics]]
+=== Basics for storing the configuration
 
 When you have a buildroot configuration that you are satisfied with and
 you want to share it with others, put it under revision control or move
@@ -12,11 +12,6 @@ consists of the buildroot configuration, the configuration files for
 packages that you use (kernel, busybox, uClibc, ...), and your rootfs
 modifications.
 
-
-[[customize-store-basics]]
-=== Basics for storing the configuration
-
-
 [[customize-store-buildroot-config]]
 ==== Buildroot configuration
 

docs/manual/customize-toolchain.txt

@@ -1,49 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-[[toolchain-custom]]
-=== Customizing the toolchain
-
-There are three distinct types of toolchain backend supported in Buildroot,
-available under the menu +Toolchain+, invoking +make menuconfig+.
-
-==== Using the external toolchain backend
-
-There is no way of tuning an external toolchain since Buildroot does not
-generate it.
-
-It also requires to set the Buildroot settings according to the toolchain ones
-(see xref:external-toolchain-backend[]).
-
-When using an external toolchain, Buildroot generates a wrapper program,
-that transparently passes the appropriate options (according to the
-configuration) to the external toolchain programs. In case you need to
-debug this wrapper to check exactly what arguments are passed, you can
-set the environment variable +BR2_DEBUG_WRAPPER+ to either one of:
-
-* +0+, empty or not set: no debug
-
-* +1+: trace all arguments on a single line
-
-* +2+: trace one argument per line
-
-==== Using the internal Buildroot toolchain backend
-
-The internal Buildroot toolchain backend allows to generate toolchains
-based on http://www.uclibc.org/[uClibc],
-https://www.gnu.org/software/libc/[glibc] and
-http://www.eglibc.org/[eglibc].
-Generation of (e)glibc-based toolchains is still experimental in
-Buildroot.
-
-It allows to tune major settings, such as:
-
-* Linux headers version;
-
-* C library configuration (only available for
-  http://www.uclibc.org/[uClibc], see xref:uclibc-custom[uClibc]);
-
-* Binutils, GCC, Gdb and toolchain options.
-
-These settings are available after selecting the +Buildroot toolchain+ type in
-the menu +Toolchain+.

docs/manual/customize-uclibc-config.txt

@@ -1,33 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-[[uclibc-custom]]
-=== Customizing the uClibc configuration
-
-Just like xref:busybox-custom[BusyBox], http://www.uclibc.org/[uClibc]
-offers a lot of configuration options. They allow you to select
-various functionalities depending on your needs and limitations.
-
-The easiest way to modify the configuration of uClibc is to
-follow these steps:
-
-* Do an initial compilation of Buildroot without trying to customize
-  uClibc.
-
-* Invoke +make uclibc-menuconfig+. The nice configuration assistant,
-  similar to the one used in the Linux kernel or Buildroot,
-  appears. Make your configuration changes as appropriate.
-
-* Copy the +$(O)/build/uClibc-VERSION/.config+ file to a different
-  place (e.g. +board/MANUFACTURER/BOARDNAME/uClibc.config+) and adjust
-  the uClibc configuration file option +BR2_UCLIBC_CONFIG+ to refer to this
-  configuration instead of the default one.
-
-* Run the compilation of Buildroot again.
-
-Otherwise, you can simply change +package/uclibc/uClibc-VERSION.config+,
-without running the configuration assistant.
-
-If you want to use an existing config file for uClibc, then see
-xref:env-vars[].
-

docs/manual/customize.txt

@@ -1,18 +1,16 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-== Customization
+== Project-specific customization
+
+The following sections describe the various way in which you can
+customize Buildroot for a given project.
+
+For instructions on how to add new packages to Buildroot, refer to
+xref:adding-packages[]
 
 include::customize-rootfs.txt[]
 
-include::customize-busybox-config.txt[]
-
-include::customize-uclibc-config.txt[]
-
-include::customize-kernel-config.txt[]
-
-include::customize-toolchain.txt[]
-
 include::customize-store.txt[]
 
 include::customize-packages.txt[]

docs/manual/developer-guide.txt

@@ -1,12 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-include::writing-rules.txt[]
-
-include::adding-packages.txt[]
-
-include::patch-policy.txt[]
-
-include::download-infra.txt[]
-
-include::debugging-buildroot.txt[]

docs/manual/eclipse-integration.txt

@@ -1,7 +1,7 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-== Integration with Eclipse
+=== Integration with Eclipse
 
 While a part of the embedded Linux developers like classical text
 editors like Vim or Emacs, and command-line based interfaces, a number

docs/manual/going-further.txt

@@ -1,8 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-== Going further in Buildroot's innards
-
-include::how-buildroot-works.txt[]
-
-include::advanced.txt[]

docs/manual/how-buildroot-works.txt

@@ -1,7 +1,7 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-=== How Buildroot works
+== How Buildroot works
 
 As mentioned above, Buildroot is basically a set of Makefiles that
 download, configure, and compile software with the correct options. It

docs/manual/make-tips.txt

@@ -2,20 +2,10 @@
 // vim: set syntax=asciidoc:
 
 [[make-tips]]
-== 'make' tips
+=== 'make' tips
 
 This is a collection of tips that help you make the most of Buildroot.
 
-.Configuration searches:
-
-The +make *config+ commands offer a search tool. Read the help message in
-the different frontend menus to know how to use it:
-
-* in _menuconfig_, the search tool is called by pressing +/+;
-* in _xconfig_, the search tool is called by pressing +Ctrl+ + +f+.
-
-The result of the search shows the help message of the matching items.
-
 .Display all commands executed by make:
 
 --------------------

docs/manual/manual.txt

@@ -20,27 +20,45 @@ image::logo.png[]
 
 include::introduction.txt[]
 
-include::starting-up.txt[]
+include::prerequisite.txt[]
 
-include::get-involved.txt[]
+include::getting.txt[]
+
+include::quickstart.txt[]
+
+include::resources.txt[]
 
 = User guide
 
-include::working-with.txt[]
+include::configure.txt[]
+
+include::configure-other-components.txt[]
+
+include::common-usage.txt[]
+
+include::customize.txt[]
 
 include::faq-troubleshooting.txt[]
 
 include::known-issues.txt[]
 
-include::going-further.txt[]
-
 include::legal-notice.txt[]
 
 include::beyond-buildroot.txt[]
 
 = Developer guide
 
-include::developer-guide.txt[]
+include::how-buildroot-works.txt[]
+
+include::writing-rules.txt[]
+
+include::adding-packages.txt[]
+
+include::patch-policy.txt[]
+
+include::download-infra.txt[]
+
+include::debugging-buildroot.txt[]
 
 include::contribute.txt[]
 

docs/manual/quickstart.txt

@@ -1,7 +1,7 @@
 // -*- mode:doc; -*-
 // vim: set syntax=asciidoc:
 
-== Using Buildroot
+== Buildroot quick start
 
 *Important*: you can and should *build everything as a normal user*. There
 is no need to be root to configure and use Buildroot. By running all
@@ -47,7 +47,8 @@ specifically the xref:requirement-optional[optional requirements]
 to get the dependencies of your favorite interface.
 
 For each menu entry in the configuration tool, you can find associated
-help that describes the purpose of the entry.
+help that describes the purpose of the entry. Refer to xref:configure[]
+for details on some specific configuration aspects.
 
 Once everything is configured, the configuration tool generates a
 +.config+ file that contains the entire configuration. This file will be

docs/manual/starting-up.txt

@@ -1,9 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-include::prerequisite.txt[]
-
-include::getting.txt[]
-
-include::using.txt[]
-

docs/manual/working-with.txt

@@ -1,25 +0,0 @@
-// -*- mode:doc; -*-
-// vim: set syntax=asciidoc:
-
-This section explains how you can customize Buildroot to fit your
-needs.
-
-include::configure.txt[]
-
-include::make-tips.txt[]
-
-include::customize.txt[]
-
-include::common-usage.txt[]
-
-include::eclipse-integration.txt[]
-
-== Hacking Buildroot
-
-If Buildroot does not yet fit all your requirements, you may be
-interested in hacking it to add:
-
-* new packages: refer to the xref:adding-packages[Developer guide]
-
-* new board support: refer to the
-  xref:customize-store-board-support[Developer guide].

docs/news.html

@@ -6,6 +6,18 @@
 
 <ul>
 
+  <li><b>26 August 2014 -- 2014.08-rc3 released</b>
+
+    <p>Release candidate 3 is out with more cleanups and build fixes. See the <a
+    href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2014.08-rc3">CHANGES</a>
+    file for details.</p>
+
+    <p>Head to the <a href="/downloads/">downloads page</a> to pick up the
+    <a href="/downloads/buildroot-2014.08-rc3.tar.bz2">2014.08-rc3
+    release candidate</a>, and report any problems found to the <a
+    href="lists.html">mailing list</a> or <a
+    href="https://bugs.uclibc.org">bug tracker</a>.</p>
+
   <li><b>18 August 2014 -- 2014.08-rc2 released</b>
 
     <p>Another week, another release candidate with more cleanups and

package/beecrypt/Config.in

@@ -1,5 +1,5 @@
-comment "beecrypt needs a toolchain w/ threads, atomic intrinsics"
-	depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+comment "beecrypt needs a toolchain w/ threads"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
 config BR2_PACKAGE_BEECRYPT
 	bool "beecrypt"
@@ -15,15 +15,15 @@ config BR2_PACKAGE_BEECRYPT_CPP
 	bool "C++ support"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR # icu
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS # icu
 	depends on !BR2_BINFMT_FLAT # icu
+	depends on BR2_ARCH_HAS_ATOMICS # icu
 	select BR2_PACKAGE_ICU
 	help
 	  Enable C++ support. This pulls in the (large) icu package.
 
-comment "C++ support needs a toolchain w/ wchar, atomic intrinsics"
+comment "C++ support needs a toolchain w/ wchar"
 	depends on !BR2_BINFMT_FLAT
-	depends on BR2_INSTALL_LIBSTDCPP && (!BR2_USE_WCHAR || \
-		!BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS)
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on BR2_INSTALL_LIBSTDCPP && !BR2_USE_WCHAR
 
 endif # BR2_PACKAGE_BEECRYPT

package/cairo/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_CAIRO
 	bool "cairo"
+	depends on BR2_ARCH_HAS_ATOMICS
 	select BR2_PACKAGE_PIXMAN
 	select BR2_PACKAGE_FONTCONFIG
 	select BR2_PACKAGE_XLIB_LIBX11 if BR2_PACKAGE_XORG7

package/cppcms/Config.in

@@ -26,14 +26,15 @@ config BR2_PACKAGE_CPPCMS_ICU
 	bool "enable icu support"
 	depends on !BR2_BINFMT_FLAT # icu
 	depends on BR2_USE_WCHAR # icu
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS # icu
+	depends on BR2_ARCH_HAS_ATOMICS # icu
 	select BR2_PACKAGE_ICU
 	help
 	  Using ICU allows advanced localization features into CppCMS,
 	  in another hand ICU is heavier than iconv.
 
-comment "icu support needs a toolchain w/ wchar, atomic intrinsics"
-	depends on !BR2_BINFMT_FLAT || !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+comment "icu support needs a toolchain w/ wchar"
+	depends on !BR2_BINFMT_FLAT
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_USE_WCHAR
 
 endif

package/ecryptfs-utils/Config.in

@@ -2,6 +2,10 @@ config BR2_PACKAGE_ECRYPTFS_UTILS
 	bool "ecryptfs-utils"
 	select BR2_PACKAGE_KEYUTILS
 	select BR2_PACKAGE_LIBNSS
+	# runtime dependency only, some scripts are using the
+	# 'gettext' program to get translations
+	select BR2_PACKAGE_GETTEXT
+	depends on BR2_USE_WCHAR # gettext
 	depends on BR2_USE_MMU # keyutils
 	depends on !BR2_avr32 && !BR2_microblaze # keyutils
 	depends on BR2_LARGEFILE # libnss
@@ -23,8 +27,8 @@ config BR2_PACKAGE_ECRYPTFS_UTILS
 
 	  http://ecryptfs.org
 
-comment "ecryptfs-utils needs a toolchain w/ largefile, threads"
+comment "ecryptfs-utils needs a toolchain w/ largefile, threads, wchar"
 	depends on !BR2_avr32 && !BR2_microblaze
 	depends on BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT
 	depends on BR2_USE_MMU
-	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
+	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR

package/efl/libevas-generic-loaders/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS
 	bool "libevas generic loaders"
 	select BR2_PACKAGE_LIBEINA
+	select BR2_PACKAGE_ZLIB
 	help
 	  These are additional "generic" loaders for Evas that are
 	  stand-alone executables that evas may run from its generic
@@ -17,10 +18,12 @@ config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS_SVG
 	depends on BR2_USE_WCHAR # librsvg -> glib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> glib2
 	depends on BR2_INSTALL_LIBSTDCPP # librsvg -> pango
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	help
 	  This option enables the Evas generic SVG loader
 
 comment "SVG loader needs a toolchain w/ wchar, threads, C++"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
 
 endif

package/efl/libevas-generic-loaders/libevas-generic-loaders.mk

@@ -12,7 +12,7 @@ LIBEVAS_GENERIC_LOADERS_LICENSE_FILES = COPYING
 
 LIBEVAS_GENERIC_LOADERS_INSTALL_STAGING = YES
 
-LIBEVAS_GENERIC_LOADERS_DEPENDENCIES = libeina
+LIBEVAS_GENERIC_LOADERS_DEPENDENCIES = libeina zlib
 
 # For now, we only support the SVG loader
 LIBEVAS_GENERIC_LOADERS_CONF_OPT += \

package/gettext/Config.in

@@ -1,6 +1,5 @@
 config BR2_PACKAGE_GETTEXT
 	bool "gettext"
-	depends on BR2_NEEDS_GETTEXT
 	depends on BR2_USE_WCHAR
 	help
 	  The GNU `gettext' utilities are a set of tools that provide a

package/gstreamer/gst-plugins-good/Config.in

@@ -178,6 +178,7 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_ANNODEX
 
 config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_CAIRO
 	bool "cairo"
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_PNG
 
@@ -208,9 +209,15 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_PULSE
 	depends on BR2_TOOLCHAIN_HAS_THREADS # pulseaudio
 	depends on BR2_LARGEFILE # pulseaudio -> libsndfile
 	depends on BR2_USE_MMU # pulseaudio
+	depends on BR2_ARCH_HAS_ATOMICS # pulseaudio
 	select BR2_PACKAGE_PULSEAUDIO
 	bool "pulseaudio"
 
+comment "pulseaudio support needs a toolchain w/ largefile, threads"
+	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
+
 config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC
 	bool "souphttpsrc (http client)"
 	depends on BR2_USE_WCHAR # libsoup -> glib2

package/gstreamer/gstreamer/gstreamer.mk

@@ -12,7 +12,7 @@ GSTREAMER_INSTALL_STAGING = YES
 # Checking if unaligned memory access works correctly cannot be done when cross
 # compiling. For the following architectures there is no information available
 # in the configure script.
-ifeq ($(BR2_avr32)$(BR2_xtensa)$(BR2_microblaze),y)
+ifeq ($(BR2_arc)$(BR2_avr32)$(BR2_xtensa)$(BR2_microblaze),y)
 GSTREAMER_CONF_ENV = as_cv_unaligned_access=no
 endif
 ifeq ($(BR2_aarch64),y)

package/gstreamer1/gst1-plugins-good/Config.in

@@ -278,6 +278,7 @@ comment "v4l2 needs toolchain w/ headers >= 3.0"
 
 config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_CAIRO
 	bool "cairo"
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_PNG
 	help
@@ -308,11 +309,17 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE
 	depends on BR2_TOOLCHAIN_HAS_THREADS # pulseaudio
 	depends on BR2_LARGEFILE # pulseaudio -> libsndfile
 	depends on BR2_USE_MMU # pulseaudio
+	depends on BR2_ARCH_HAS_ATOMICS # pulseaudio
 	select BR2_PACKAGE_PULSEAUDIO
 	bool "pulseaudio"
 	help
 	  PulseAudio plugin library
 
+comment "pulseaudio support needs a toolchain w/ largefile, threads"
+	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
+
 config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC
 	bool "souphttpsrc (http client)"
 	depends on BR2_USE_WCHAR # libsoup -> glib2

package/gstreamer1/gstreamer1/gstreamer1.mk

@@ -14,7 +14,7 @@ GSTREAMER1_LICENSE = LGPLv2+ LGPLv2.1+
 # Checking if unaligned memory access works correctly cannot be done when cross
 # compiling. For the following architectures there is no information available
 # in the configure script.
-ifeq ($(BR2_avr32)$(BR2_xtensa)$(BR2_microblaze),y)
+ifeq ($(BR2_arc)$(BR2_avr32)$(BR2_xtensa)$(BR2_microblaze),y)
 GSTREAMER1_CONF_ENV = as_cv_unaligned_access=no
 endif
 ifeq ($(BR2_aarch64),y)

package/gutenprint/gutenprint-001-cups-support-replaces-static-with-static-libtool-lib.patch

@@ -0,0 +1,39 @@
+From 08a5d355160eb2ac8346ae1b94591418343217f9 Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour@openwide.fr>
+Date: Sun, 17 Aug 2014 23:43:20 +0200
+Subject: [PATCH 1/1] cups support: replaces -static with -static-libtool-libs
+
+gutenprint rely on the original behaviour of -static, but since commit
+in buildroot "support/libtool: make -static behave like -all-static" [1],
+the build of genppd is broken.
+
+genppd need to be build statically otherwise the following warning appears:
+***WARNING: Use of --disable-static-genppd or --disable-static
+            when building CUPS is very dangerous.  The build may
+            fail when building the PPD files, or may *SILENTLY*
+            build incorrect PPD files or cause other problems.
+            Please review the README and release notes carefully!
+
+[1] http://git.buildroot.net/buildroot/commit/?id=97703978ac870ce2b14ad144f8e082de82aa2c64
+
+Signed-off-by: Romain Naour <romain.naour@openwide.fr>
+---
+ src/cups/Makefile.am | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/cups/Makefile.am b/src/cups/Makefile.am
+index 1e27ae0..d711b70 100644
+--- a/src/cups/Makefile.am
++++ b/src/cups/Makefile.am
+@@ -84,7 +84,7 @@ noinst_SCRIPTS=test-rastertogutenprint
+ endif
+ 
+ if BUILD_GENPPD_STATIC
+-STATIC_LDOPTS=-static -export-dynamic
++STATIC_LDOPTS=-static-libtool-libs -export-dynamic
+ endif
+ 
+ cups_calibrate_SOURCES = cups-calibrate.c
+-- 
+1.9.3
+

package/icu/Config.in

@@ -7,7 +7,7 @@ config BR2_PACKAGE_ICU
 	# file, and it cannot easily be changed to generate FLAT
 	# format.
 	depends on !BR2_BINFMT_FLAT
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	depends on BR2_ARCH_HAS_ATOMICS
 	help
 	  International Components for Unicode.
 
@@ -25,7 +25,8 @@ config BR2_PACKAGE_ICU_CUSTOM_DATA_PATH
 
 endif
 
-comment "icu needs a toolchain w/ C++, wchar, threads, atomic intrinsics"
+comment "icu needs a toolchain w/ C++, wchar, threads"
 	depends on !BR2_BINFMT_FLAT
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+		!BR2_TOOLCHAIN_HAS_THREADS

package/imagemagick/imagemagick.mk

@@ -29,6 +29,7 @@ IMAGEMAGICK_CONF_ENV = ac_cv_sys_file_offset_bits=32
 endif
 
 IMAGEMAGICK_CONF_OPT = --program-transform-name='s,,,' \
+		--disable-openmp \
 		--without-perl \
 		--without-wmf \
 		--without-openexr \

package/jack2/Config.in

@@ -4,7 +4,7 @@ config BR2_PACKAGE_JACK2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # alsa-lib
 	depends on BR2_USE_MMU # fork()
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	depends on BR2_ARCH_HAS_ATOMICS
 	select BR2_PACKAGE_LIBSAMPLERATE
 	select BR2_PACKAGE_LIBSNDFILE
 	select BR2_PACKAGE_ALSA_LIB
@@ -21,7 +21,8 @@ config BR2_PACKAGE_JACK2
 
 	  http://jackaudio.org/
 
-comment "jack2 needs a toolchain w/ largefile, threads, C++, atomic intrinsics"
+comment "jack2 needs a toolchain w/ largefile, threads, C++"
 	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || \
-		!BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+		!BR2_INSTALL_LIBSTDCPP

package/lbreakout2/lbreakout2.mk

@@ -14,7 +14,7 @@ LBREAKOUT2_DEPENDENCIES = sdl libpng
 LBREAKOUT2_CONF_ENV = \
 	SDL_CONFIG="$(STAGING_DIR)/usr/bin/sdl-config"
 
-ifeq ($(BR2_PACKAGE_GETTEXT),y)
+ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 LBREAKOUT2_DEPENDENCIES += gettext
 LBREAKOUT2_CONF_ENV += LIBS=-lintl
 endif

package/libftdi/Config.in

@@ -1,6 +1,7 @@
 config BR2_PACKAGE_LIBFTDI
 	bool "libftdi"
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
+	depends on BR2_ARCH_HAS_ATOMICS
 	select BR2_PACKAGE_LIBUSB
 	select BR2_PACKAGE_LIBUSB_COMPAT
 	help
@@ -19,4 +20,5 @@ config BR2_PACKAGE_LIBTFDI_CPP
 endif # BR2_PACKAGE_LIBFTDI
 
 comment "libftdi needs a toolchain w/ threads"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_TOOLCHAIN_HAS_THREADS

package/libgtk2/Config.in

@@ -17,6 +17,7 @@ config BR2_PACKAGE_LIBGTK2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
 	depends on BR2_USE_MMU # glib2
 	depends on BR2_INSTALL_LIBSTDCPP # pango
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	help
 	  The GTK+ version 2 graphical user interface library
 
@@ -34,6 +35,7 @@ endif
 
 comment "libgtk2 needs a toolchain w/ wchar, threads, C++"
 	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on BR2_PACKAGE_XORG7
 	depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP || \
 		!BR2_TOOLCHAIN_HAS_THREADS

package/libinput/libinput-01-rename-log_msg-to-libinput_log_msg.patch

@@ -0,0 +1,59 @@
+From 89a3ae2de21e528b8feb80dbea3928d43982d3be Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour@openwide.fr>
+Date: Thu, 21 Aug 2014 18:18:16 +0200
+Subject: [PATCH 1/1] rename log_msg to libinput_log_msg
+
+This fixes a conflict between libevdev and libinput on the definition
+of the log_msg() symbol.
+
+http://autobuild.buildroot.net/results/c13/c133b7c706ee31302125df8ca94f4d0f0152c6c6/build-end.log
+
+Signed-off-by: Romain Naour <romain.naour@openwide.fr>
+---
+ src/libinput-private.h | 14 +++++++-------
+ src/libinput.c         |  2 +-
+ 2 files changed, 8 insertions(+), 8 deletions(-)
+
+diff --git a/src/libinput-private.h b/src/libinput-private.h
+index f9d2f87..ac1e1c4 100644
+--- a/src/libinput-private.h
++++ b/src/libinput-private.h
+@@ -81,15 +81,15 @@ typedef void (*libinput_source_dispatch_t)(void *data);
+ 
+ struct libinput_source;
+ 
+-#define log_debug(...) log_msg(LIBINPUT_LOG_PRIORITY_DEBUG, __VA_ARGS__)
+-#define log_info(...) log_msg(LIBINPUT_LOG_PRIORITY_INFO, __VA_ARGS__)
+-#define log_error(...) log_msg(LIBINPUT_LOG_PRIORITY_ERROR, __VA_ARGS__)
+-#define log_bug_kernel(...) log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "kernel bug: " __VA_ARGS__)
+-#define log_bug_libinput(...) log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "libinput bug: " __VA_ARGS__);
+-#define log_bug_client(...) log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "client bug: " __VA_ARGS__);
++#define log_debug(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_DEBUG, __VA_ARGS__)
++#define log_info(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_INFO, __VA_ARGS__)
++#define log_error(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_ERROR, __VA_ARGS__)
++#define log_bug_kernel(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "kernel bug: " __VA_ARGS__)
++#define log_bug_libinput(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "libinput bug: " __VA_ARGS__);
++#define log_bug_client(...) libinput_log_msg(LIBINPUT_LOG_PRIORITY_ERROR, "client bug: " __VA_ARGS__);
+ 
+ void
+-log_msg(enum libinput_log_priority priority, const char *format, ...);
++libinput_log_msg(enum libinput_log_priority priority, const char *format, ...);
+ 
+ int
+ libinput_init(struct libinput *libinput,
+diff --git a/src/libinput.c b/src/libinput.c
+index eec9efb..4e3f6fa 100644
+--- a/src/libinput.c
++++ b/src/libinput.c
+@@ -110,7 +110,7 @@ static struct log_data log_data = {
+ };
+ 
+ void
+-log_msg(enum libinput_log_priority priority, const char *format, ...)
++libinput_log_msg(enum libinput_log_priority priority, const char *format, ...)
+ {
+ 	va_list args;
+ 
+-- 
+1.9.3
+

package/librsvg/Config.in

@@ -10,6 +10,7 @@ config BR2_PACKAGE_LIBRSVG
 	depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
 	depends on BR2_USE_MMU # glib2
 	depends on BR2_INSTALL_LIBSTDCPP # pango
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	help
 	  The rsvg library is an efficient renderer for Scalable
 	  Vector Graphics (SVG) pictures.
@@ -18,4 +19,5 @@ config BR2_PACKAGE_LIBRSVG
 
 comment "librsvg needs a toolchain w/ wchar, threads, C++"
 	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP

package/libsvg-cairo/Config.in

@@ -1,5 +1,6 @@
 config BR2_PACKAGE_LIBSVG_CAIRO
 	bool "libsvg-cairo"
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_SVG
 	select BR2_PACKAGE_LIBSVG

package/libtorrent/Config.in

@@ -2,13 +2,13 @@ config BR2_PACKAGE_LIBTORRENT
 	bool "libtorrent"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	depends on BR2_ARCH_HAS_ATOMICS
 	select BR2_PACKAGE_LIBSIGC
 	help
 	  BitTorrent library written in C++ for *nix
 
 	  http://libtorrent.rakshasa.no/
 
-comment "libtorrent needs a toolchain w/ C++, threads, atomic intrinsics"
-	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS \
-		|| !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+comment "libtorrent needs a toolchain w/ C++, threads"
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS

package/ltris/ltris.mk

@@ -21,7 +21,7 @@ else
 LTRIS_CONF_OPT += --disable-audio
 endif
 
-ifeq ($(BR2_PACKAGE_GETTEXT),y)
+ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 LTRIS_DEPENDENCIES += gettext
 LTRIS_CONF_ENV += LIBS=-lintl
 endif

package/mpd/Config.in

@@ -45,11 +45,13 @@ config BR2_PACKAGE_MPD_AUDIOFILE
 config BR2_PACKAGE_MPD_PULSEAUDIO
 	bool "pulseaudio"
 	depends on BR2_LARGEFILE # pulseaudio -> libsndfile
+	depends on BR2_ARCH_HAS_ATOMICS # pulseaudio
 	select BR2_PACKAGE_PULSEAUDIO
 	help
 	  Enable pulseaudio output support.
 
 comment "pulseaudio support needs a toolchain w/ largefile"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_LARGEFILE
 
 config BR2_PACKAGE_MPD_BZIP2

package/msgpack/Config.in

@@ -1,7 +1,7 @@
 config BR2_PACKAGE_MSGPACK
 	bool "msgpack"
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_arc # atomic builtins
+	depends on BR2_ARCH_HAS_ATOMICS
 	help
 	  MessagePack is an efficient binary serialization format.
 
@@ -11,5 +11,5 @@ config BR2_PACKAGE_MSGPACK
 	  http://msgpack.org/
 
 comment "msgpack needs a toolchain w/ C++"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_arc

package/ntp/S49ntp

@@ -36,7 +36,7 @@ case "$1" in
 	sleep 1
 	$0 start
 	;;
-  *) echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+  *) echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
 	exit 1
 	;;
 esac

package/openocd/Config.in

@@ -14,6 +14,7 @@ comment "Adapters"
 
 config BR2_PACKAGE_OPENOCD_FT2XXX
 	bool "FT2xxx/FT4xxx Based JTAG Programmer"
+	depends on BR2_ARCH_HAS_ATOMICS # libftdi
 	select BR2_PACKAGE_LIBFTDI
 	help
 	  Enable building support for FT2232 based devices

package/pango/Config.in

@@ -4,6 +4,7 @@ config BR2_PACKAGE_PANGO
 	depends on BR2_TOOLCHAIN_HAS_THREADS # glib2
 	depends on BR2_USE_MMU # glib2
 	depends on BR2_INSTALL_LIBSTDCPP # freetype support
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_EXPAT
 	select BR2_PACKAGE_CAIRO
@@ -23,5 +24,6 @@ config BR2_PACKAGE_PANGO
 
 comment "pango needs a toolchain w/ wchar, threads, C++"
 	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \
 		!BR2_INSTALL_LIBSTDCPP

package/php/Config.ext

@@ -168,14 +168,14 @@ config BR2_PACKAGE_PHP_EXT_INTL
 	depends on BR2_USE_WCHAR
 	depends on !BR2_BINFMT_FLAT # icu
 	depends on BR2_TOOLCHAIN_HAS_THREADS # icu
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS # icu
+	depends on BR2_ARCH_HAS_ATOMICS # icu
 	help
 	  Internationalization support
 
-comment "intl support needs a toolchain w/ C++, wchar, threads, atomic intrinsics"
+comment "intl support needs a toolchain w/ C++, wchar, threads"
 	depends on !BR2_BINFMT_FLAT
-	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS \
-		|| !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
 
 comment "Image processing"
 

package/php/php.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-PHP_VERSION = 5.5.15
+PHP_VERSION = 5.5.16
 PHP_SITE = http://www.php.net/distributions
 PHP_INSTALL_STAGING = YES
 PHP_INSTALL_STAGING_OPT = INSTALL_ROOT=$(STAGING_DIR) install

package/pkg-generic.mk

@@ -318,14 +318,14 @@ $(2)_RAWNAME			=  $$(patsubst host-%,%,$(1))
 # version control system branch or tag, for example remotes/origin/1_10_stable.
 ifndef $(2)_VERSION
  ifdef $(3)_VERSION
-  $(2)_DL_VERSION = $$($(3)_VERSION)
+  $(2)_DL_VERSION := $$($(3)_VERSION)
   $(2)_VERSION := $$(subst /,_,$$($(3)_VERSION))
  else
   $(2)_VERSION = undefined
   $(2)_DL_VERSION = undefined
  endif
 else
-  $(2)_DL_VERSION = $$($(2)_VERSION)
+  $(2)_DL_VERSION := $$($(2)_VERSION)
   $(2)_VERSION := $$(subst /,_,$$($(2)_VERSION))
 endif
 

package/procps-ng/procps-ng.mk

@@ -12,7 +12,7 @@ PROCPS_NG_LICENSE_FILES = COPYING COPYING.LIB
 
 PROCPS_NG_DEPENDENCIES = ncurses
 
-ifeq ($(BR2_PACKAGE_GETTEXT),y)
+ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 PROCPS_NG_DEPENDENCIES += gettext
 PROCPS_NG_CONF_OPT += LIBS=-lintl
 endif

package/pulseaudio/Config.in

@@ -8,6 +8,7 @@ config BR2_PACKAGE_PULSEAUDIO
 	select BR2_PACKAGE_SPEEX
 	depends on BR2_LARGEFILE
 	depends on BR2_USE_MMU # fork()
+	depends on BR2_ARCH_HAS_ATOMICS
 	help
 	  PulseAudio is a sound system for POSIX OSes, meaning that it
 	  is a proxy for your sound applications. It allows you to do
@@ -32,4 +33,5 @@ endif
 
 comment "pulseaudio needs a toolchain w/ wchar, largefile, threads"
 	depends on BR2_USE_MMU
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS

package/python-msgpack/Config.in

@@ -3,7 +3,7 @@ config BR2_PACKAGE_PYTHON_MSGPACK
 	depends on BR2_PACKAGE_PYTHON
 	select BR2_PACKAGE_MSGPACK
 	depends on BR2_INSTALL_LIBSTDCPP # msgpack
-	depends on !BR2_arc # msgpack - atomic builtins
+	depends on BR2_ARCH_HAS_ATOMICS # msgpack
 	help
 	  MessagePack (http://msgpack.org/) is a fast, compact binary
 	  serialization format, suitable for similar data to JSON.
@@ -13,6 +13,6 @@ config BR2_PACKAGE_PYTHON_MSGPACK
 	  https://pypi.python.org/pypi/msgpack-python/
 
 comment "python-msgpack needs a toolchain w/ C++"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on BR2_PACKAGE_PYTHON
 	depends on !BR2_INSTALL_LIBSTDCPP
-	depends on !BR2_arc

package/qt5/qt5base/Config.in

@@ -241,15 +241,12 @@ config BR2_PACKAGE_QT5BASE_DBUS
 config BR2_PACKAGE_QT5BASE_ICU
 	bool "Enable ICU support"
 	select BR2_PACKAGE_ICU
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS # icu
+	depends on BR2_ARCH_HAS_ATOMICS # icu
 	depends on !BR2_BINFMT_FLAT # icu
 	help
 	  This option enables ICU support in Qt5. This is for example
 	  needed for Qt5Webkit.
 
-comment "icu needs a toolchain w/ atomic intrinsics"
-	depends on !BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
-
 config BR2_PACKAGE_QT5BASE_TSLIB
 	bool "Enable Tslib support"
 	depends on !BR2_PREFER_STATIC_LIB # dlopen

package/rtorrent/Config.in

@@ -4,7 +4,7 @@ config BR2_PACKAGE_RTORRENT
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU # fork()
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS # libtorrent
+	depends on BR2_ARCH_HAS_ATOMICS # libtorrent
 	select BR2_PACKAGE_LIBCURL
 	select BR2_PACKAGE_LIBSIGC
 	select BR2_PACKAGE_LIBTORRENT
@@ -15,7 +15,7 @@ config BR2_PACKAGE_RTORRENT
 
 	  http://libtorrent.rakshasa.no/
 
-comment "rtorrent needs a toolchain w/ C++, threads, wchar, atomic intrinsics"
+comment "rtorrent needs a toolchain w/ C++, threads, wchar"
 	depends on BR2_USE_MMU
-	depends on !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS \
-		&& BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS)
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)

package/thrift/Config.in

@@ -4,7 +4,7 @@ config BR2_PACKAGE_THRIFT
 	depends on BR2_USE_WCHAR
 	depends on BR2_LARGEFILE
 	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+	depends on BR2_ARCH_HAS_ATOMICS
 	select BR2_PACKAGE_BOOST
 	select BR2_PACKAGE_LIBEVENT
 	select BR2_PACKAGE_OPENSSL
@@ -19,7 +19,7 @@ config BR2_PACKAGE_THRIFT
 
 	  http://thrift.apache.org/
 
-comment "thrift needs a toolchain w/ C++, largefile, wchar, threads, atomic intrinsics"
+comment "thrift needs a toolchain w/ C++, largefile, wchar, threads"
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || \
-		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP || \
-		!BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
+		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP

package/tvheadend/S99tvheadend

@@ -31,7 +31,7 @@ case "$1" in
         fi
         ;;
     stop)
-        printf "Stoping TVHeadend daemon: "
+        printf "Stopping TVHeadend daemon: "
         start-stop-daemon -K -q -p ${PIDFILE} -s TERM
         sleep 2
         if start-stop-daemon -K -q -p ${PIDFILE} -t; then
@@ -46,7 +46,7 @@ case "$1" in
         "${0}" start
         ;;
     *)
-        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+        echo "Usage: $0 {start|stop|restart|force-reload}" >&2
         exit 1
         ;;
 esac

package/usb_modeswitch/Config.in

@@ -3,8 +3,19 @@ config BR2_PACKAGE_USB_MODESWITCH
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libusb
 	select BR2_PACKAGE_LIBUSB
 	help
-	  USB mode switcher.
-	  Used to switch mode on multiple-function devices
+	  Some models of some USB devices such as modems and Wifi
+	  adapters power-up in mass storage mode to provide access to
+	  drivers for the device's application mode. usb_modeswitch
+	  changes the mode of such devices from the initial power-up
+	  mode to the application mode. Specific configuration data
+	  for each device model is required.
+
+	  usb_modeswitch can be used with the usb_modeswitch_data
+	  package and udev for automatic mode switching when devices
+	  are connected.
+
+	  For more information search the Internet for "Virtual CD-ROM
+	  switching utility".
 
 	  http://www.draisberghof.de/usb_modeswitch/
 

package/webkit/Config.in

@@ -17,6 +17,7 @@ config BR2_PACKAGE_WEBKIT
 	depends on BR2_PACKAGE_LIBGTK2
 	depends on BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS
 	depends on !BR2_BINFMT_FLAT # icu
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	select BR2_PACKAGE_CAIRO
 	select BR2_PACKAGE_CAIRO_PNG
 	select BR2_PACKAGE_ENCHANT
@@ -44,6 +45,7 @@ config BR2_PACKAGE_WEBKIT
 
 comment "webkit needs libgtk2 and a toolchain w/ C++, wchar, threads"
 	depends on BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	depends on !BR2_PACKAGE_LIBGTK2 || !BR2_INSTALL_LIBSTDCPP || \
 		!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU

package/weston/Config.in

@@ -1,5 +1,6 @@
 comment "weston needs udev and a toolchain w/ threads, headers >= 3.0"
 	depends on !BR2_avr32
+	depends on BR2_ARCH_HAS_ATOMICS
 	depends on !BR2_PACKAGE_HAS_UDEV || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0
 
 config BR2_PACKAGE_WESTON
@@ -15,6 +16,7 @@ config BR2_PACKAGE_WESTON
 	depends on !BR2_avr32 # wayland
 	depends on BR2_TOOLCHAIN_HAS_THREADS # wayland
 	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0
+	depends on BR2_ARCH_HAS_ATOMICS # cairo
 	# Runtime dependency
 	select BR2_PACKAGE_XKEYBOARD_CONFIG
 	# Make sure at least one compositor is selected.

package/xmlstarlet/xmlstarlet.mk

@@ -12,9 +12,15 @@ XMLSTARLET_LICENSE_FILES = COPYING
 XMLSTARLET_DEPENDENCIES += libxml2 libxslt \
 	$(if $(BR2_PACKAGE_LIBICONV),libiconv)
 
-XMLSTARLET_CONF_OPT += --disable-static-libs \
+XMLSTARLET_CONF_OPT += \
 	--with-libxml-prefix=${STAGING_DIR}/usr \
 	--with-libxslt-prefix=${STAGING_DIR}/usr \
 	--with-libiconv-prefix=${STAGING_DIR}/usr
 
+ifeq ($(BR2_PREFER_STATIC_LIB),y)
+XMLSTARLET_CONF_OPT += --enable-static-libs
+else
+XMLSTARLET_CONF_OPT += --disable-static-libs
+endif
+
 $(eval $(autotools-package))

toolchain/toolchain-common.in

@@ -44,10 +44,6 @@ config BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS
 config BR2_TOOLCHAIN_HAS_SSP
 	bool
 
-config BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS
-	bool
-	default y if !BR2_arc
-
 config BR2_ENABLE_LOCALE_PURGE
 	bool "Purge unwanted locales"
 	help