arm64: dts: sc7180: Add OPP table for all qup devices

qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593506712-24557-3-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Rajendra Nayak
2020-07-13 16:43:21 -07:00
committed by Bjorn Andersson
parent 13cadb34e5
commit d91ea1e0e8
+59
View File
@@ -697,6 +697,25 @@
status = "disabled";
};
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-128000000 {
opp-hz = /bits/ 64 <128000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@@ -739,6 +758,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -753,6 +774,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -787,6 +810,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -801,6 +826,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -833,6 +860,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -867,6 +896,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -881,6 +912,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -913,6 +946,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -947,6 +982,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -961,6 +998,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -1010,6 +1049,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1024,6 +1065,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1056,6 +1099,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1090,6 +1135,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1104,6 +1151,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1136,6 +1185,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1170,6 +1221,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1184,6 +1237,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1218,6 +1273,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1232,6 +1289,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";