arm64: dts: qcom: qcm6490-fairphone-fp5: Enable UFS
Enable the UFS phy and controller so that we can access the internal storage of the phone. At the same time we need to bump the minimum voltage used for UFS VCC, otherwise it doesn't initialize properly. The 2.952V is taken from the vcc-voltage-level property downstream. See also the following link for more information about the VCCQ/VCCQ2: https://gerrit-public.fairphone.software/plugins/gitiles/kernel/msm-extra/devicetree/+/1590a3739e7dc29d2597307881553236d492f188/fp5/yupik-idp-pm7250b.dtsi#207 Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231002-fp5-ufs-v2-1-e2d7de522134@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
committed by
Bjorn Andersson
parent
24187868e1
commit
cad7c46ae2
@@ -284,8 +284,9 @@
|
||||
};
|
||||
|
||||
vreg_l7b: ldo7 {
|
||||
regulator-min-microvolt = <2400000>;
|
||||
regulator-max-microvolt = <3544000>;
|
||||
/* Constrained for UFS VCC, at least until UFS driver scales voltage */
|
||||
regulator-min-microvolt = <2952000>;
|
||||
regulator-max-microvolt = <2952000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
@@ -853,6 +854,28 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l7b>;
|
||||
vcc-max-microamp = <800000>;
|
||||
/*
|
||||
* Technically l9b enables an eLDO (supplied by s1b) which then powers
|
||||
* VCCQ2 of the UFS.
|
||||
*/
|
||||
vccq-supply = <&vreg_l9b>;
|
||||
vccq-max-microamp = <900000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l10c>;
|
||||
vdda-pll-supply = <&vreg_l6b>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user