arm64: dts: qcom: ipq6018: add thermal zones

Add thermal zones to make use of thermal sensors data. For CPU zone,
add cooling device that uses CPU frequency scaling.

Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://lore.kernel.org/r/1706173452-1017-4-git-send-email-mantas@8devices.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Mantas Pucka
2024-02-06 15:58:26 -06:00
committed by Bjorn Andersson
parent 0b17197055
commit 8f053e5616
+121
View File
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <2>;
@@ -43,6 +44,7 @@
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq6018_s2>;
#cooling-cells = <2>;
};
CPU1: cpu@1 {
@@ -55,6 +57,7 @@
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq6018_s2>;
#cooling-cells = <2>;
};
CPU2: cpu@2 {
@@ -67,6 +70,7 @@
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq6018_s2>;
#cooling-cells = <2>;
};
CPU3: cpu@3 {
@@ -79,6 +83,7 @@
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq6018_s2>;
#cooling-cells = <2>;
};
L2_0: l2-cache {
@@ -905,6 +910,122 @@
};
};
thermal-zones {
nss-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
nss-top-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
nss-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
nss-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
wcss-phya0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
wcss-phya0-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
wcss-phya1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
wcss-phya1-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 13>;
trips {
cpu-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
cpu_alert: cpu-passive {
temperature = <110000>;
hysteresis = <1000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
lpass-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 14>;
trips {
lpass-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
ddrss-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 15>;
trips {
ddrss-top-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,