arm64: dts: qcom: pm6350: add temp sensor and thermal zone config

Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values, except for trip2 where 125°C is used instead of 145°C
due to limitations without a configured ADC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221028075405.124809-1-luca.weiss@fairphone.com
This commit is contained in:
Luca Weiss
2022-11-07 17:25:46 -06:00
committed by Bjorn Andersson
parent bcfefc98c5
commit 16c0c46f38
+38
View File
@@ -5,6 +5,37 @@
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm6350-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm6350_temp>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
trip2 {
temperature = <125000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pmic@0 {
compatible = "qcom,pm6350", "qcom,spmi-pmic";
@@ -35,6 +66,13 @@
};
};
pm6350_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm6350_gpios: gpio@c000 {
compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
reg = <0xc000>;