"systemctl default" should behave identically to "telinit N" (where N is the
corresponding runlevel target number), therefore it should use isolate job mode
too.
Documentation states that 0 is correct, and all other
similar functions return 0 on success.
Pointed-out-by: Steven Hiscocks <steven-systemd@hiscocks.me.uk>
In systemd-bootchart, the disk model information will not be found
unless the root device is specified using `root=/dev/sdxY` on the kernel
line. Just add a note as to why this doesn't happen.
On Thu, Feb 7, 2013 at 3:52 PM, Robert Milasan <rmilasan@suse.com> wrote:
> Hi, seems that using some strange usb devices with really bogus serial
> numbers usb_id creates links with junk strings in it:
>
> /dev/disk/by-id/usb-TSSTcorp_BDDVDW_SE-506AB_㡒䍌䜶䉗ぁㄴ㌴†ँ-0:0
>
> Initially was believed that usb_id is to blame, then the kernel, but it
> turns out that really the usb cd/dvd drive has this bogus serial number:
>
> output from dmesg:
> [ 538.200160] usb 1-2: new high-speed USB device number 5 using
> ehci_hcd [ 538.335067] usb 1-2: New USB device found, idVendor=0e8d,
> idProduct=1956 [ 538.335080] usb 1-2: New USB device strings: Mfr=1,
> Product=2, SerialNumber=3 [ 538.335089] usb 1-2: Product: MT1956
> [ 538.335097] usb 1-2: Manufacturer: MediaTek Inc
> [ 538.335105] usb 1-2: SerialNumber:
> \xffffffe3\xffffffa1\xffffff92\xffffffe4\xffffff8d\xffffff8c ...
> [ 538.337540] scsi6 : usb-storage 1-2:1.0 [ 539.341385] scsi 6:0:0:0:
> CD-ROM TSSTcorp BDDVDW SE-506AB TS00 PQ: 0 ANSI: 0
> [ 539.354240] sr0: scsi3-mmc drive: 0x/24x writer dvd-ram cd/rw
> xa/form2 cdda tray [ 539.354777] sr 6:0:0:0: Attached scsi CD-ROM sr0
> [ 539.355122] sr 6:0:0:0: Attached scsi generic sg2 type 5
Turning off filtering with --filter is just too confusing.
Config option "Filter" doesn't have to be changed, here
"Filter=yes" already meant to filter.
This makes 'status' behave like 'list-units':
systemctl status -> status of all units
systemctl -t error status -> status of error units
systemctl -t mount status -> etc.
It is not really necessary to have a hard requirement dependency on
systemd-journald.socket in almost every unit. The socket gets pulled
into boot via at least two ways:
sockets.target -> systemd-journald.socket
sysinit.target -> systemd-journald.service -> systemd-journald.socket
So just assume something pulled the socket in and drop the automatic
requirement dependencies on it.
"systemctl stop systemd-journald.socket" will now not take the whole
system down with it.
journald is supposed to work. Failure to connect to its socket implies
losing messages. It should be a very unusual event. Log the failure with
LOG_CRIT.
Just because this unit's stdout/stderr failed to connect to the journal
does not necessarily mean that we shouldn't try to log the failure using
a structured entry, so let's use log_struct_unit.
Almost every unit logs to the journal. If journald gets a permanent
failure, units would not be able to start (exit code 209/STDOUT).
Add a fallback to /dev/null to avoid making the system entirely
unusable in such a case.
write_to_journal() returns 0 if journal_fd is closed and nothing is
written. We need to make sure we'll try log_open_kmsg() then to make the
fallback work for "journal-or-kmsg".
Essentially transfer the 'README' file in src/bootchart to the man page
for easier reading by users.
Moved the 'History' section to the bottom, before the 'See Also' section.
man/systemd-bootchart.xml | 100 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 83 insertions(+), 17 deletions(-)
systemd-nspawn will now print the PID of the child.
An example showing how to enter the container is added
to the man page.
Support for nsenter without an explicit command was
added in https://github.com/karelzak/util-linux/commit/5758069
(post v2.22.2). So this example requires both a new kernel
and the latest util-linux.
Michal Schmidt