Removing references to regsitry 1.0, pointing to distribution
Updating links and title
Adding in comments
Signed-off-by: Mary Anthony <mary@docker.com>
(cherry picked from commit d550d729e1)
- started from Diogo's work
- updated after discussions with team
- Updating with new key names
- fixing weight
- adding in sandbox
- adding in gliffy for images
- backing out to old names for now
- Copy edit pass
- Entering comments from the content trust team
- Update name of branch and image name
- Removing the last diogo reference
- Updating with Seb's comments
Signed-off-by: Mary Anthony <mary@docker.com>
(cherry picked from commit 753bf40f15)
With systemd in version 219 IP forwarding should be forced in the interface configuration file.
Signed-off-by: yyekhlef <yyekhlef@gmail.com>
(cherry picked from commit 35aebdc803)
The documentation for Debian and Ubuntu explains how to enable memory
and swap accounting but doesn't explain why it is disabled in the first
place. The problem with those subsystems is that they incurs a
performance hit even when not used at all. Add this explanation.
The provided figure are quite vague. The memory overhead is easily
verifiable. It is for example cited in [RedHat documentation][]. For the
performance hit, maybe the performance is better now, but a few years
ago, it was said to be [between 6 and 15%][].
The goal is that people don't just enable memory accounting if they
don't have a use for it.
[RedHat documentation]: https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Resource_Management_Guide/sec-memory.html
[between 6 and 15%]: https://lwn.net/Articles/517562/
Signed-off-by: Vincent Bernat <vincent@bernat.im>
(cherry picked from commit 56b33e9f27)
Currently some notary tests change the system clock to check for expiration.
Skip these tests until the code can be refactored to not rely on updating the system clock.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit bf3c1e6a3a)
This patch splits LookupEndpoints into LookupPullEndpoints and
LookupPushEndpoints so that mirrors added with --registry-mirror are
skipped in the list returned by LookupPushEndpoints.
Fixes https://github.com/docker/distribution/issues/823
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit b899977ee2)
The process of pulling an image spawns a new goroutine for each layer in the
image manifest. If any of these downloads fail we would stop everything and
return the error, even though other goroutines would still be running and
writing output through a progress reader which is attached to an http response
writer. Since the request handler had already returned from the first error,
the http server panics when one of these download goroutines makes a write to
the response writer buffer.
This patch prevents this crash in the daemon http server by waiting for all of
the download goroutines to complete, even if one of them fails. Only then does
it return, terminating the request handler.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit d80c4244d3)
Currently the service type is 'simple', the default, meaning that
docker.service is considered to be started straight after
spawning. This is incorrect as there is significant amount of time
between spawning and docker ready to accept connections on the passed
sockets. Docker does implement systemd socket activate and
notification protocol, and send the ready signal to systemd, once it
is ready. However for systemd to take those notifications into
account, the service file type should be set to notify.
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
(cherry picked from commit d3e5179c29)
- Removing references to Boot2Docker replacing with Docker Machine
- Removing sudo warnings in instances where appropriate (no sudo in file)
- Updating with comments
Signed-off-by: Mary Anthony <mary@docker.com>
(cherry picked from commit cc375a1e48)
Fixes error continuing execution when the parsing fails.
Signed-off-by: David Calavera <david.calavera@gmail.com>
(cherry picked from commit 3d3db0d4af)
The custom configuration will also be used in docker invocations made
by the completion script itself, just like `-H`.
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit b898111d3a)
"Options:" listed when you run "docker --help" and "docker daemon
--help" do not match the options listed in "man/docker.1.md". This PR
makes 'docker --help', 'docker daemon --help' and 'man docker' consistent.
Also 2 typo fixes.
Signed-off-by: Sally O'Malley <somalley@redhat.com>
(cherry picked from commit f3bea61c80)
Integration tests were failing due to proc filter behavior
changes with new apparmor policies.
Also include the missing docker-unconfined policy resolving
potential startup errors. This policy is complain-only so
it should behave identically to the standard unconfined policy,
but will not apply system path-based policies within containers.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 5832715052)
- Because of a bug, all the statically preallocated
bridge networks have /24 as network mask.
Signed-off-by: Alessandro Boch <aboch@docker.com>
(cherry picked from commit dab0447ae0)
We noticed a regression since the 1.7.1 patch after some refactoring. This
patch corrects the behavior and adds integration tests for modified manifest
and rootfs layer blobs.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit de52a3bcaa)
Completion now filters the images and containers by given
`--type`.
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit 69cde5a302)
Minor fixes:
* v1.19: GET /containers/(id)/logs - add missing '/'
* v1.18: Break up POST /containers/create and POST /containers/(id)/start into separate lines.
Signed-off-by: Charles Chan <charleswhchan@users.noreply.github.com>
(cherry picked from commit 084d464081)
Update UX to use aliases for root, snapshot, and target key
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit 6ce76cd9ed)
Use updated notary to pick up updates from security review
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit d594c6fcd8)
After tailing a file, if the number of lines requested is > the number
of lines in the file, this would cause a json unmarshalling error to
occur when we later try to go follow the file.
So brute force set it to the end if any tailing occurred.
There is potential that there could be some missing log messages if logs
are being written very quickly, however I was not able to make this
happen even with `while true; do echo hello; done`, so this is probably
acceptable.
While testing this I also found a panic in LogWatcher.Close can be
called twice due to a race. Fix channel close to only close when there
has been no signal to the channel.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit c57faa91e2)
Without this fix, `docker -l info ` would not complete the commands.
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit aab82c5c22)
It's a bit confusing: the "global options" are valid as "global options"
for all client commands (i.e. all but daemon).
Example: `docker --log-level info run`
For `docker daemon`, these "global options" are only valid as "command
options".
Example: `docker daemon --log-level info`
As command completion cannot tell which command the user is going to
type next, completion for the daemon command has to allow illegal
syntaxes like
`docker --log-level info daemon --log-level info`
Signed-off-by: Harald Albers <github@albersweb.de>
(cherry picked from commit e0dad9a153)
This patch fixes a bug where a user specifies a v1 mirror for
--registry-mirror and pull an image from the Hub.
It used to not fallback because of an unexpected error returned when
trying to JSON marshal nginx output.
We now ensure that any unexpected error falls back to the next endpoint
in the list.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit a21ba12f4e)
If I run two containers with the same network they share the same /etc/resolv.conf.
The current code changes the labels of the /etc/resolv.conf currently to the
private label which causes it to be unusable in the first container.
This patch changes the labels to a shared label if more then one container
will use the content.
Docker-DCO-1.1-Signed-off-by: Dan Walsh dwalsh@redhat.com (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
(cherry picked from commit 90b8cebda6)
[pkg/archive] Update archive/copy path handling
- Remove unused TarOptions.Name field.
- Add new TarOptions.RebaseNames field.
- Update some of the logic around path dir/base splitting.
- Update some of the logic behind archive entry name rebasing.
[api/types] Add LinkTarget field to PathStat
[daemon] Fix stat, archive, extract of symlinks
These operations *should* resolve symlinks that are in the path but if the
resource itself is a symlink then it *should not* be resolved. This patch
puts this logic into a common function `resolvePath` which resolves symlinks
of the path's dir in scope of the container rootfs but does not resolve the
final element of the path. Now archive, extract, and stat operations will
return symlinks if the path is indeed a symlink.
[api/client] Update cp path hanling
[docs/reference/api] Update description of stat
Add the linkTarget field to the header of the archive endpoint.
Remove path field.
[integration-cli] Fix/Add cp symlink test cases
Copying a symlink should do just that: copy the symlink NOT
copy the target of the symlink. Also, the resulting file from
the copy should have the name of the symlink NOT the name of
the target file.
Copying to a symlink should copy to the symlink target and not
modify the symlink itself.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit 75f6929b44)
Fix#14915. Add unit test for #14915.
Thanks @runcom for the test case: when the client calls 1.18 api
version w/o hostconfig it results in a nil pointer dereference.
Signed-off-by: Stephen Rust <srust@blockbridge.com>
(cherry picked from commit c358a4cd35)
The 'deny ptrace' statement was supposed to only ignore
ptrace failures in the AUDIT log. However, ptrace was implicitly
allowed from unconfined processes (such as the docker daemon and
its integration tests) due to the abstractions/base include.
This rule narrows the definition such that it will only ignore
the failures originating inside of the container and will not
cause denials when the daemon or its tests ptrace inside processes.
Introduces positive and negative tests for ptrace /w apparmor.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit f5c388b35a)
Builds where the base images have been resolved to trusted digest
references will now be tagged with the original tag reference from
the Dockerfile on a successful build.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit bb2e6c72d2)
The `ApplyDiff` function takes a tar archive stream that is
automagically decompressed later. This was causing a double
decompression, and when the layer was empty, that causes an early EOF.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
(cherry picked from commit 273f50c741)
In `ApplyLayer` and `Untar`, the stream is magically decompressed. Since
this is not able to be toggled, rather than break this ./pkg/ API, add
an `ApplyUncompressedLayer` and `UntarUncompressed` that does not
magically decompress the layer stream.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
(cherry picked from commit 56bf275e32)
Currently login and search do not load per registry certificates.
This is a regression caused by the last refactor since this was recently fixed.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
(cherry picked from commit e863a07b89)
Return an error when the container is stopped only in api versions
equal or greater than 1.20 (docker 1.8).
Signed-off-by: David Calavera <david.calavera@gmail.com>
(cherry picked from commit 621e3d8587)
So we marshal/unmarshal its value properly when it's empty.
Signed-off-by: David Calavera <david.calavera@gmail.com>
(cherry picked from commit 4e25d2982b)
The engine policy will now only complain
as a temporary measure to ensure we do not
cause breakages while users exercise this
policy.
This is NOT the policy for containers, but
for the newly-introduced policy for the
daemon itself.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 6c887be769)
Implements the policies for the remaining binaries
called by the Docker engine and eliminates the
giant whitelisted 'all files' permission in favor
of granular whitelisting and child-specific policies.
It should be possible now to remove the 'file' permission,
but for the sake of keeping Docker unbroken, we'll try
to gradually tighten the policy.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 8b2fcddcd2)
Will attempt to load profiles automatically. If loading fails
but the profiles are already loaded, execution will continue.
A hard failure will only occur if Docker cannot load
the profiles *and* they have not already been loaded via
some other means.
Also introduces documentation for AppArmor.
Signed-off-by: Eric Windisch <eric@windisch.us>
(cherry picked from commit 3edc88f76d)
I think it was original intention, because even half of a comment was about
MaxInt32.
Fix#15038
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
(cherry picked from commit eb45602d2f)
Symbolic links in the context directory path are now evaluated.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
(cherry picked from commit 01d570ad30)
This version includes a fix that avoids checking against specific HTTP
status codes. The previous behavior violated the registry API spec.
Fixes#14975
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 091dbc1034)
In 1.6.2 we were decoding inspect API response into interface{}.
time.Time fields were JSON encoded as RFC3339Nano in the response
and when decoded into interface{} they were just strings so the inspect
template treated them as just strings.
From 1.7 we are decoding into types.ContainerJSON and when the template
gets executed it now gets a time.Time and it's formatted as
2015-07-22 05:02:38.091530369 +0000 UTC.
This patch brings back the old behavior by typing time.Time fields
as string so they gets formatted as they were encoded in JSON -- RCF3339Nano
Signed-off-by: Antonio Murdaca <runcom@linux.com>
(cherry picked from commit c9207bc0aa)
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Clean up tests to remove duplicate code
Add tests which run pull and create in an isolated configuration directory.
Add build test for untrusted tag
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The Dockerfile is rewritten with images references on FROM
instructions resolved to trusted digests. The rewritten Dockerfile
is swapped with the original one during context upload.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Separated preparation of context and Dockerfile for
the various different methods of specifying them.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Added notary server to docker base image.
Created trust suite which runs trust server for running trusted commands.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There is no option validation for "journald" log-driver, so it makes no
sense to fail in that case.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Based on the list containers with filters options it would seem that filtering containers with label `test=docker-java` could be done with `{"test":["docker-java"]}` which doesn't work
The options that work are `{"label":["test"]}` and `{"label":["test=docker-java"]}`
As seen in https://github.com/docker-java/docker-java/pull/262
Signed-off-by: Carlos Sanchez <carlos@apache.org>
A moratorium has been added to the road map to add a moratorium on adding
remote registry access to commands that don't already do so.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
Currently the vendor script removes directories which do not have imported go packages, however this also ends up removing license files which may be other directories.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The header row was not being printed when "docker ps" was invoked without containers thanks to the new format support, and we instead received a single blank line.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Without this fix, `docker --log-opt ` would not complete anything
because the completions were driver specific.
Signed-off-by: Harald Albers <github@albersweb.de>
Without this fix, `docker --log-driver fluentd --log-opt fluentd-tag=b`
would complete `b` to `build`.
Completion of the commands has to be nailed to __docker_pos_first_nonflag
Signed-off-by: Harald Albers <github@albersweb.de>
pushV2Tag already deduplicates layers, but the scope of this
deduplication is only for a particular tag. If we are pushing all tags
in a repository, we may check layers several times. Fix this by moving
the layersSeen map from the pushV2Tag function to the v2Pusher struct.
In addition to avoiding some useless round-trips, this makes the "docker
push" output less confusing. It formerly could contain many repeated
lines like:
124e2127157f: Image already exists
124e2127157f: Image already exists
...
Add test coverage based on the "docker push" output: a hash should not
appear multiple times when pushing multiple tags.
Fixes#14873
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
By default, using go with package will only validate the go file for the
current platform (or at last misses file_windows.go for example). This
tries to fix that.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
After removing the duplicate ROADMAP in a separate PR, a few other
issues were noted in README.md which are fixed here:
- the directory is project, not hack
- make.sh is no longer in the current dir since hack/ is not project/
anymore
- MAINTAINERS is no longer here as a markdown file, but is a TOML file
in the root of the project
- links were added to all files to make it easier to follow from here
to the appropriate location
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Wraps the engine itself with an AppArmor policy.
This restricts what may be done by applications
we call out to, such as 'xz'.
Significantly, this policy also restricts the policies
to which a container may be spawned into. By default,
users will be able to transition to an unconfined
policy or any policy prefaced with 'docker-'.
Local operators may add new local policies prefaced
with 'docker-' without needing to modify this policy.
Operators choosing to disable privileged containers
will need to modify this policy to remove access
to change_policy to unconfined.
Signed-off-by: Eric Windisch <eric@windisch.us>
Prevent the docker daemon from mounting the created network files over
those provided by the user via -v command line option. This would otherwise
hide the one provide by the user.
The benefit of this is that a user can provide these network files using the
-v command line option and place them in a size-limited filesystem.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The docker-py commit used in the standard `Dockerfile` is from Feb. 2015
and is out of date with the current API level and has fixes for things
like the new docker cli config location and registry v2 changes/API
responses as well.
Also pass "NOT_ON_HOST=true" to docker-py test suite so that tests
relying on direct HOST interaction (versus running in a container) are
skipped.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Re-add the docs from @calavera's PR to the moved cli cmd reference docs.
Fix gofmt and vet issues from carried commits
Add integration test for using format with --no-trunc and multi-names
Fix custom_test map order dependency on expected value check
Add docs to reference/commandline/ps.md
Remove "-F" flag option from original carried PR content
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
with the current duplication of code in the grap.go split-up, this puts
all assembly/disassembly logic into isolated functions
Signed-off-by: Vincent Batts <vbatts@redhat.com>
if there is a tar-data.json.gz present for an image layer, then use it
to create the tar archive, instead of the traditional graphdriver Diff.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Conflicts:
graph/graph.go
Preserve the entries from the tar archive for layers added to the graph.
With these entries and relative filesystem path, the tar archives can be
reassembled later.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
By using the 'unconfined' policy for privileged
containers, we have inherited the host's apparmor
policies, which really make no sense in the
context of the container's filesystem.
For instance, policies written against
the paths of binaries such as '/usr/sbin/tcpdump'
can be easily circumvented by moving the binary
within the container filesystem.
Fixes GH#5490
Signed-off-by: Eric Windisch <eric@windisch.us>
When we are creating a container, first we call into graph driver to take
snapshot of image and create root for container-init. Then we write some
files to it and call into graph driver again to create container root
from container-init as base.
Once we have written files to container-init root, we don't unmount it
before taking a snapshot of it. Looks like with XFS it leaves it in such
a state that when we mount the container root, it goes into log recovery
path.
Jul 22 10:24:54 vm2-f22 kernel: XFS (dm-6): Mounting V4 Filesystem
Jul 22 10:24:54 vm2-f22 kernel: XFS (dm-6): Starting recovery (logdev: internal)
Jul 22 10:24:54 vm2-f22 kernel: XFS (dm-6): Ending recovery (logdev: internal)
This should not be required. So let us unmount container-init before use
it as a base for container root and then XFS does not go into this
internal recovery path.
Somebody had raised this issue for ext4 sometime back and proposed the same
change. I had shot it down at that point of time. I think now time has
come for this change.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fix the following warnings:
pkg/mount/mountinfo.go:5:6: type name will be used as mount.MountInfo by other packages, and that stutters; consider calling this Info
pkg/mount/mountinfo.go:7:2: struct field Id should be ID
Signed-off-by: Antonio Murdaca <runcom@linux.com>
It's introduced in
68ba5f0b69 (Execdriver implementation on new libcontainer API)
But I don't see reson why we need it.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Documented changes to API to enable new `docker cp` behavior.
Added documentation on `docker cp` usage and behavior.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
If a registry mirror is using TLS, ensure that certs for it
are picked up from /etc/docker/certs.d
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Adds several integration tests for `docker cp` behavior with over a dozen
tests for each of:
container -> local
local -> container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Supports copying things INTO a container from a local file or from a tar
archive read from stdin.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Adds http handlers for new API endpoints:
GET ContainersArchivePath
Return a Tar Archive of the contents at the specified location in a
container. Deprecates POST ContainersCopy. Use a HEAD request to stat
the resource.
PUT ContainersExtractToDir
Extract the Tar Archive from the request body to the directory at the
specified location inside a container.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
The only uses of RequestAuthorization and its associated functions were
removed in 19515a7ad8 ("Update graph to
use vendored distribution client for the v2 codepath")
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
The following methods will deprecate the Copy method and introduce
two new, well-behaved methods for creating a tar archive of a resource
in a container and for extracting a tar archive into a directory in a
container.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Adds TarResource and CopyTo functions to be used for creating
archives for use with the new `docker cp` behavior.
Adds multiple test cases for the CopyFrom and CopyTo
functions in the pkg/archive package.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Add golint to the Dockerfile, and a `validate-lint` task to the
Makefile. Currently, the linter will process a harcoded list of packages
that will expand as we fix more warnings. Eventually, the linter should
process all subpackages of the repo (excluding vendored code).
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
After merging mounting cgroups in container this tests doing wrong
checks. Cgroup paths could be prepended by other cgroups from host.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
The automatic installation of AppArmor policies prevents the
management of custom, site-specific apparmor policies for the
default container profile. Furthermore, this change will allow
a future policy for the engine itself to be written without demanding
the engine be able to arbitrarily create and manage AppArmor policies.
- Add deb package suggests for apparmor.
- Ubuntu postinst use aa-status & fix policy path
- Add the policies to the debian packages.
- Add apparmor tests for writing proc files
Additional restrictions against modifying files in proc
are enforced by AppArmor. Ensure that AppArmor is preventing
access to these files, not simply Docker's configuration of proc.
- Remove /proc/k?mem from AA policy
The path to mem and kmem are in /dev, not /proc
and cannot be restricted successfully through AppArmor.
The device cgroup will need to be sufficient here.
- Load contrib/apparmor during integration tests
Note that this is somewhat dirty because we
cannot restore the host to its original configuration.
However, it should be noted that prior to this patch
series, the Docker daemon itself was loading apparmor
policy from within the tests, so this is no dirtier or
uglier than the status-quo.
Signed-off-by: Eric Windisch <eric@windisch.us>
Fixes an issue with curly braces being escaped when they should not be.
This was particularly an issue in places where `--format '{{ ... }}'`
is used in the man docs.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
There are several bug reports on this error happening, and error is
not helpful unless you read the code. Google brings up removing
the repositories.btrfs file.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
* api/client/ps.go: Refactor CmdPs to use a fields list of
characters to determine which columns to print on `docker ps`
invocation.
This adds an ability for the docker command to print the columns of
output in arbitrary order.
Signed-off-by: Jeff Mickey <j@codemac.net>
Docker-DCO-1.1-Signed-off-by: Jeff Mickey <j@codemac.net>
- fully capitalize HTTP in HTTPHeaders
- comment for CONFIGFILE
- camelcase and privatize oldConfigfile, defaultIndexserver
- remove unused var errConfigFileMissing
- comments for methods and functions throughout
- external references to renamed variables changed
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
This solves several problems that arise from the special treatment of
"=" in Bash.
The fix was required as some log drivers have options in a key=value
form. It also addresses the --option=value and the negated boolean syntax
(--boolean=false).
Note that this is not a general fix for these problems, it is limited to
the __docker_pos_first_nonflag function.
Signed-off-by: Harald Albers <github@albersweb.de>
The ZFS driver should raise proper errors when the ZFS utility is
missing or when there's no zfs partition active on the system. Raising the
proper errors make possible to silently ignore the ZFS storage
driver when no default storage driver is specified.
Previous to this commit it was no longer possible to start the
docker daemon in that way:
docker -d --storage-opt dm.loopdatasize=2GB
The above command resulted in an exit error because the ZFS driver
tried to use the storage options.
Signed-off-by: Flavio Castelli <fcastelli@suse.com>
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Closes#14621
This one grew to be much more than I expected so here's the story... :-)
- when a bad port string (e.g. xxx80) is passed into container.create()
via the API it wasn't being checked until we tried to start the container.
- While starting the container we trid to parse 'xxx80' in nat.Int()
and would panic on the strconv.ParseUint(). We should (almost) never panic.
- In trying to remove the panic I decided to make it so that we, instead,
checked the string during the NewPort() constructor. This means that
I had to change all casts from 'string' to 'Port' to use NewPort() instead.
Which is a good thing anyway, people shouldn't assume they know the
internal format of types like that, in general.
- This meant I had to go and add error checks on all calls to NewPort().
To avoid changing the testcases too much I create newPortNoError() **JUST**
for the testcase uses where we know the port string is ok.
- After all of that I then went back and added a check during container.create()
to check the port string so we'll report the error as soon as we get the
data.
- If, somehow, the bad string does get into the metadata we will generate
an error during container.start() but I can't test for that because
the container.create() catches it now. But I did add a testcase for that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Current default basesize is 10G. Change it to 100G. Reason being that for
some people 10G is turning out to be too small and we don't have capabilities
to grow it dyamically.
This is just overcommitting and no real space is allocated till container
actually writes data. And this is no different then fs based graphdrivers
where virtual size of a container root is unlimited.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
The check for the end of the loop was off by one which is why we saw
errors on the following inpsect() call instead of a timeout
Signed-off-by: Doug Davis <dug@us.ibm.com>
Replaced github.com/docker/libcontainer with
github.com/opencontainers/runc/libcontaier.
Also I moved AppArmor profile generation to docker.
Main idea of this update is to fix mounting cgroups inside containers.
After updating docker on CI we can even remove dind.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Check if there is a plugin socket first under `/run/docker/plugins/NAME.sock`.
If there is no socket for a plugin, check `/etc/docker/plugins/NAME.spec` and
`/usr/lib/docker/plugins/NAME.spec` for spec files.
Signed-off-by: David Calavera <david.calavera@gmail.com>
These will create the apt & yum repos for the deb/rpms generated by build-deb
and build-rpm.
Adds sign-repo script which signs the repo metadata with a gpg key.
Signed-off-by: Jessica Frazelle <princess@docker.com>
The pull request reviewing process and labeling strategy is described as
part of a dedicated file in `project/REVIEWING.md`: remove the existing
description from the `MAINTAINERS` file.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
If there's an error while unpacking the build context then we weren't erasing
the tmp dir created to persist the context.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Currently canonical name gets set to the local name and displayed in the errors.
Canonical name should be the unique and canonical name for an image.
Use docker.io as the canonical domain for images on the public registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
- Add fluentd logging driver to zsh completion #12876
- Add inspect --type flag to zsh completion #13187
- Respect -H option in zsh completion #13195
- Fix number of argument limit for pause and unpause in zsh completion
Signed-off-by: Steve Durrheimer <s.durrheimer@gmail.com>
This PR adds recommendations in man pages to use only [a-z0-9-_.] when
naming and tagging images. The purpose of this is to add consistency
and to make image naming caps rules seem less arbitrary.
This PR addresses confusion with:
1. BaseImage:Tagged (not allowed)
2. baseimage:Tagged (allowed)
3. baseimage/tagged:V1 (allowed)
4. baseimage/Tagged:V1 (not allowed)
Signed-off-by: Sally O'Malley <somalley@redhat.com>
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
For hybrid cloud, some ubuntu vm images doesn't have the directory
`/etc/apt/sources.list.d` which cause failure on creating
`/etc/apt/sources.list.d/docker.list`.
To fix this issue, create this directory first (if it doesn't exist).
Signed-off-by: Penghan Wang <ph.wang@daocloud.io>
The docker/distribution dependency was updated in the previous commit to allow
repository name components to only consist of a single letter. The unit tests
have been updated to cement this change.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Carry #11675
Aside from what #11675 says, to me a key usecase for this is to support
more than one Docker cli running at the same time but each may have its
own set of config files.
Signed-off-by: Doug Davis <dug@us.ibm.com>
`docker login` in 1.7 produces a config file in `~/docker/config.json`
instead of a `~/.dockercfg`.
Signed-off-by: Nate Brennand <nate.brennand@clever.com>
This is a follow-on to PR #14520.
PR #14520 is the quick fix to get the testing working again.
This PR makes sure that the list of execs associated with a container goes
from zero to one (as a new exec is run), then back to zero when the exec is
finished. However, we should be able to query the exec while the container
is still around, and even though the exec isn't listed in the container's
inspect data.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Libcontainer already supported mount container's own cgroup into
container, with this patch, we can see container's own cgroup info
in container.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
By adding this header AuthTransport will add Basic authentication to the request and allow 'docker search' results to include private images.
Signed-off-by: Matt Moore <mattmoor@google.com>
Now that we have ROADMAP.md in the root of the project, the outdated and
non-specific ROADMAP.md in project/ can be removed.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This takes the final removal for exec commands in two steps. The first
GC tick will mark the exec commands for removal and then the second tick
will remove the config from the daemon.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add a few links to the release output that the release captain can use to announce the release.
Signed-off-by: David Calavera <david.calavera@gmail.com>
It was missing some variants and 'maintainer' isn't actually supported.
Also sorted the list of allowed cmds in the code just to make it easier
to diff with the docs.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This adds an event loop for running a GC cleanup for exec command
references that are on the daemon. These cannot be cleaned up
immediately because processes may need to get the exit status of the
exec command but it should not grow out of bounds. The loop is set to a
default 5 minute interval to perform cleanup.
It should be safe to perform this cleanup because unless the clients are
remembering the exec id of the process they launched they can query for
the status and see that it has exited. If they don't save the exec id
they will have to do an inspect on the container for all exec instances
and anything that is not live inside that container will not be returned
in the container inspect.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This removes the exec config from the container after the command exits
so that dead exec commands are not displayed in the container inspect.
The commands are still kept on the daemon so that when you inspect the
exec command, not the container, you are still able to get it's exit
status.
This also changes the ProcessConfig to a pointer.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
The ability to save and verify base device UUID (#13896) introduced a
situation where the initialization would panic when removing the device
returns EBUSY.
Functions `verifyBaseDeviceUUID` and `saveBaseDeviceUUID` now take the
lock on the `DeviceSet`, which solves the problem as `removeDevice`
assumes it owns the lock.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Often it happens that docker is not able to shutdown/remove the thin
pool it created because some device has leaked into some mount name
space. That means device is in use and that means pool can't be removed.
Docker will leave pool as it is and exit. Later when user starts the
docker, it finds pool is already there and docker uses it. But docker
does not know it is same pool which is using the loop devices. Now
docker thinks loop devices are not being used. That means it does not
display the data correctly in "docker info", giving user wrong information.
This patch tries to detect if loop devices as created by docker are
being used for pool and fills in the right details in "docker info".
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
With apologies (it wasn't clear from the contributing guidelines how this project feels about PRs for one or two word doc fixes).
Signed-off-by: Erik M. Bray <erik.m.bray@gmail.com>
Options for zfs storage driver were incorrectly placed
under 'exec driver options' header. Move the header to
the correct place.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
The features Docker relies on are called "cgroups" and "namespaces",
so fix the language accordingly.
Also for cgroups, provide a link to Linux kernel documentation that
is more relevant (and deep) than the Wikipedia article.
Cc: Ankush Agarwal <ankushagarwal11@gmail.com>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Vendoring libnetwork commit: 8fb0a8bc9e3166216ca3da2d0bb15332f6685745
- Fixes breakage in k/v store handling logic in experimental
- Adds back all the fixes that went in 1.7.1 to master
- Change VXLAN port in overlay driver to IANA assigned port
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Showing "$$ exit 13" caught my eye and wasn't correct.
While in there I also made it so the following paragraph didn't go past 80 chars
Signed-off-by: Doug Davis <dug@us.ibm.com>
Currently the layer array is initialized with the first layer then the first layer is appened to the layer list. Adding the first layer twice causes the layer to appear twice in the manifest, making a duplicate push and pull attempt occur.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
There is no reason to error out or not do what the user expects when -i
is specified on the cli. We should always attach to the stdin of the
container in this situation.
Closes#14390
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
It seems http://hub.docker.com is not accessible anymore, so switching
to https://hub.docker.com for testRequires(c, Network).
Adds a Timeout check on the TestRequirement to *panic* if there is a
timeout (fail fast).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Update the man page for 'docker commit' to make explicit the fact that
'commit' does not save data in volumes.
Addresses comments in #7583
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
When using boot2docker through git bash, there is a nasty issue when trying to share a folder, due to how git bash parses the URIs. The issue is explained in [issue #12751](https://github.com/docker/docker/issues/12751) but needs more visibility in the docs.
Signed-off-by: Matthieu Larcher <github@ringabell.org>
One part of script relies on messages that are
output by some system tool. In non-en locale
those messages get localized which breaks the
script.
This patch enforces en locale for that system
tool.
Signed-off-by: Maxim Kulkin <maxim.kulkin@gmail.com>
Some devs might want to download the binary directly,
especially for systems where the install script does not
work.
Signed-off-by: Ankush Agarwal <ankushagarwal11@gmail.com>
If a container is read-only, also set /proc, /sys,
& /dev to read-only. This should apply to both privileged and
unprivileged containers.
Note that when /dev is read-only, device files may still be
written to. This change will simply prevent the device paths
from being modified, or performing mknod of new devices within
the /dev path.
Tests are included for all cases. Also adds a test to ensure
that /dev/pts is always mounted read/write, even in the case of a
read-write rootfs. The kernel restricts writes here naturally and
bad things will happen if we mount it ro.
Signed-off-by: Eric Windisch <eric@windisch.us>
DeviceMapper must be explicitly selected because the Docker binary might not be linked to the right devmapper library.
With this change, Docker fails fast if the driver detection finds the devicemapper directory but the driver is not the default option.
The option `override_udev_sync_check` doesn't make sense anymore, since the user must be explicit to select devicemapper, so it's being removed.
Docker fails to use devicemapper only if Docker has been built statically unless the option was explicit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Container networking statistics are no longer
retrievable from libcontainer after the introduction
of libnetwork. This change adds the missing code
for docker daemon to retireve the nw stats from
Endpoint.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Add unit tests of the ParseEnvFile function. Test for:
* good file
* empty file
* non existent file
* badly formatted file
Signed-off-by: Matthieu Hauglustaine <matt.hauglustaine@gmail.com>
Return an error value if bufio failed to properly read a token.
Avoids running a container with partial environment.
Fixes: #14266
Signed-off-by: Matthieu Hauglustaine <matt.hauglustaine@gmail.com>
libnetwork host, none and bridge driver initialization is incorrectly
disabled if the daemon flag --bridge=none. The expected behavior of
setting --bridge as none is to disable the bridge driver alone and let
all other modes to be operational.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
The link pointed to experimental.md, but that didn't exist. It looks like README.md was intended. Probably experimental.md was renamed.
Signed-off-by: Leen Besselink <github@consolejunkie.net>
By convention /pkg is safe to use from outside the docker tree, for example
if you're building a docker orchestrator.
/nat currently doesn't have any dependencies outside of /pkg, so it seems
reasonable to move it there.
This rename was performed with:
```
gomvpkg -vcs_mv_cmd="git mv {{.Src}} {{.Dst}}" \
-from github.com/docker/docker/nat \
-to github.com/docker/docker/pkg/nat
```
Signed-off-by: Peter Waller <p@pwaller.net>
The registry client's TLS configuration used the
default cipher list, including RC4. This change
copies the default cipher list from Golang 1.4 and
removes RC4 from that list. RC4 ciphers are considered
weak and vulnerable to a number of attacks.
Uses the tlsconfig package to define allowed ciphers.
Signed-off-by: Eric Windisch <eric@windisch.us>
cgroups and namespaces links are broken. They point to blog.dotcloud.com which is dead. Updating the links to point to informative pages.
Signed-off-by: Ankush Agarwal <ankushagarwal11@gmail.com>
This adds a more meaningful error on the client side so the "bad
certificate" error coming from the TLS dial code has some context for
the user.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
During `(*Graph).Register, there was no protection on adding new layers
concurrently. In some cases, this resulted in corruption of a layer by creating
the directory but not the underlying data. This manifested in several different
IO errors reported in the client. This attempts to fix this by adding a mutex
by Image ID to protect the Register operation.
We do not completely understand the root cause of this corruption other than
the result is somehow tied to this particular function. This fix has been
confirmed to address the issue through testing.
Unfortunately, this fix does not address existing corruption. The user will
have to remove and re-pull the corrupt layer to stop the error from happening
in the future. This change only ensures that the layer will not become corrupt.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Export metadata for container and image in docker-inspect when overlay
graphdriver is in use. Right now it is done only for devicemapper graph
driver.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
- creating index which is overview of configuring logs
- linking to individual journald/fluent material
- leaving behind table and link to index in run
Signed-off-by: Mary Anthony <mary@docker.com>
When a container is started with `--net=host` with
a particular name and it is subsequently destroyed,
then all subsequent creations of the container with
the same name will fail. This is because in `--net=host`
the namespace is shared i.e the host namespace so
trying to destroy the host namespace by calling
`LeaveAll` will fail and the endpoint is left with
the dangling state. So the fix is, for this mode, do
not attempt to destroy the namespace but just cleanup
the endpoint state and return.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
The last "," should not shown up, otherwise you will get the error
back as below:
- invalid character '}' looking for beginning of object key string.
Signed-off-by: Hu Keping <hukeping@huawei.com>
With the 1.7 release, we introduced a change to how we store registry
credentials, but the build API endpoint did not expect a change in the format
of that file. This patch fixes this problem so that you can again pull private
images during `docker build`.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
The current documentation correctly states that dockerignore pattern
searches are non-recursive. However, the example given for Markdown
files seems to contradict this by saying that `*.md` will exclude *all*
Markdown files. This commit clarifies the situation by explicitly
specifying that `*.md` will only exclude files in the root directory of
the project.
Signed-off-by: Tim Wraight <tim.wraight@tangentlabs.co.uk>
With publish-service and default-network support, a container could be
connected to a user-defined network that is backed by any driver/plugin.
But if the user uses port mapping or expose commands, the expectation
for that container is to behave like existing bridge network.
Thanks to the Libnetwork's CNM model, containers can be connected
to the bridge network as a secondary network in addition to the
user-specified network.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Now that the default network mode is "default" and this mode is chosen
even if the mode is empty string, it is not correct to have builder
still pointing to "bridge" as default (though this is daemon default).
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- brings in vxlan based native multihost networking
- added a daemon flag required by libkv for dist kv operations
- moved the daemon flags to experimental
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This commit makes use of the CNM model supported by LibNetwork and
provides an ability to let a container to publish a specified service.
Behind the scenes, if a service with the given name doesnt exist, it is
automatically created on appropriate network and attach the container.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
* `--compression=none` and `--no-compression` to disable compression.
* `--compression=auto` to use the default compression (enabled by default).
* `--compression=xz` to use xz compression (default compression).
* `--compression=gz` to use gzip compression.
Signed-off-by: Robin Schneider <ypid@riseup.net>
Today, endpoints implementing v2 cannot properly fallback to v1 because the underlying transport that deals with authentication (Basic / Token) doesn't get annotated.
This doesn't affect DockerHub because the DockerHub endpoint appears as 'https://index.docker.io/v1/' (in .dockercfg), and the 'v1' tricks this logic just long enough that the transport is always annotated for DockerHub accesses.
Signed-off-by: Matt Moore <mattmoor@google.com>
Just to make life easier on devs so they don't need to 'cd' into
the docs dir just to test their docs edits. This doesn't do anything
more than "cd docs && make docs" so that all of the smarts are still
in the docs's Makefile and not in docker's.
Signed-off-by: Doug Davis <dug@us.ibm.com>
The cleanup to sysinfo package introduced a regression.
If memory cgroup isn't supported and --memory is specified when
starting a container, we should return info instead of nil in
checkCgroupMem(), otherwise we'll access a nil pointer.
Signed-off-by: Zefan Li <lizefan@huawei.com>
These have both been updated to no longer include the empty "scratch" layer, and `hello-world` has a fix for http->https.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
By default, the cgroup setting in libcontainer's configs.Cgroup for
memory swappiness will default to 0, which is a valid choice for memory
swappiness, but that means by default every container's memory
swappiness will be set to zero instead of the default 60, which is
probably not what users are expecting.
When the swappiness UI PR comes into Docker, there will be docker run
controls to set this per container, but for now we want to make sure
*not* to change the default, as well as work around an older kernel
issue that refuses to allow it to be set when cgroup hiearchies are in
use.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
when trying to use docker without sudo and the DOCKER_HOST env var is set docker tries to connect to the specified host instead of using the unix socket.
Signed-off-by: Campbell Allen <campbell.allen@gmail.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Upding sed, adding script to avoid redirects, remove mkdos
Signed-off-by: Mary Anthony <mary@docker.com>
Ignoring graphics with sed
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing kitematic image
Signed-off-by: Mary Anthony <mary@docker.com>
Removing draft
Signed-off-by: Mary Anthony <mary@docker.com>
Fixing link
Signed-off-by: Mary Anthony <mary@docker.com>
removing from the menu
Signed-off-by: Mary Anthony <mary@docker.com>
Updatiing order of project material
Signed-off-by: Mary Anthony <mary@docker.com>
Removing from Regsitry v2 content per Olivier
Signed-off-by: Mary Anthony <mary@docker.com>
tweaking the touchup
Signed-off-by: Mary Anthony <mary@docker.com>
Removing include; only used four places; hugo global var replace
Signed-off-by: Mary Anthony <mary@docker.com>
Entering fixes from page-by-page
Signed-off-by: Mary Anthony <mary@docker.com>
I ran a single integration test and got an error that the file
/sys/module/apparmor/parameters/enabled doesn't exist. I don't have
apparmor installed. So, just check the file first to avoid a confusing
error.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
It is easy for one to use docker for a while, shut it down and restart
docker with different set of storage options for device mapper driver
which will effectively change the thin pool. That means any of the
metadata stored in /var/lib/docker/devicemapper/metadata/ is not valid
for the new pool and user will run into various kind of issues like
container not found in the pool etc.
Users think that their images or containers are lost but it might just
be the case of configuration issue. People might use wrong metadata
with wrong pool.
To detect such situations, save UUID of base image and once docker
starts later, query and compare the UUID of base image with the
stored one. If they don't match, fail the initialization with the
error that UUID failed to match.
That way user will be forced to cleanup /var/lib/docker/ directory
and start docker again.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
An inspection of the graph package showed this function to be way out of place.
It is only depended upon by the daemon code. The function prepares a top-level
readonly layer used to provide a consistent runtime environment for docker
images.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Working docs
Update after check
update to centos 7 after second test
Updating with hopefully correct urls
Adding thaJetzah's comments
Updating with the new images
Updating after a visual check
Signed-off-by: Mary Anthony <mary@docker.com>
Updating with comments
Signed-off-by: Mary Anthony <mary@docker.com>
DOCEKR_TLS_VERIFY was being ignored because we were just checking if the
`-tlsverify` flag was set, not the actual value, which is defaulted to
the value of `os.Getenv("DOCKER_TLS_VERIFY") != ""`
The problem that this specifically fixes is where the client has set the
`DOCKER_TLS_VERIFY` env var but is connecting to a daemon that is not
verifed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
If no Mtu value is provided to the docker daemon, get the mtu from the
default route's interface. If there is no default route, default to a
mtu of 1500.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Tweaking for Hugo
Updating the Dockerfile with new sed; fix broken link on Kitematic
Fixing image pull for Dockerfile
Removing docs targets
Signed-off-by: Mary Anthony <mary@docker.com>
while wokring on another PR, I noticed that hack/vendor.sh was picking
up unrelated files. Maybe a previous update to the hack/vendor.sh failed
to run the script and push the vendor changes ?
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Currently digests are not stored on pull, causing a simple re-tag or re-push to send up all layers. Storing the digests on pull will allow subsequent pushes to the same repository to not push up content.
This does not address pushing content to a new repository. When content is pushed to a new repository, the digest will be recalculated. Since only one digest is currently stored, it may cause a new content push to the original repository.
Fixes#13883
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Export image/container metadata stored in graph driver. Right now 3 fields
DeviceId, DeviceSize and DeviceName are being exported from devicemapper.
Other graph drivers can export fields as they see fit.
This data can be used to mount the thin device outside of docker and tools
can look into image/container and do some kind of inspection.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This PR brings the vendored libnetwork code to
3be488927db8d719568917203deddd630a194564, which pulls in quite a few
fixes to support kvstore, windows daemon compilation fixes,
multi-network support for Bridge driver, etc...
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This helps ensure that `github.com/docker/docker/pkg/...` is actually safe to use in isolation (ie, doesn't import anything from `github.com/docker/docker` except other things from `pkg` or vendored dependencies).
Adding `github.com/docker/docker/utils` to the imports of `pkg/version/version.go`:
```
---> Making bundle: validate-pkg (in bundles/1.7.0-dev/validate-pkg)
These files import internal code: (either directly or indirectly)
- pkg/version/version.go imports github.com/docker/docker/autogen/dockerversion
- pkg/version/version.go imports github.com/docker/docker/utils
```
And then removing it again:
```
---> Making bundle: validate-pkg (in bundles/1.7.0-dev/validate-pkg)
Congratulations! "./pkg/..." is safely isolated from internal code.
```
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Eliminate any chance of race condition by replacing a call to sleep by a
call to top, and rely on test cleanup logic to have it exit cleanly.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
When cmd failed, log its ouput as string instead of byte array to prevent test
log like: [49 53 ....] exit status 1
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
Per @ewindisch, removing the CBC ciphers from the client preferred TLS
cipher suites. This will allow a future version of the server to also
remove the CBC ciphers from the accepted list.
This changes the server default to client + additional CBC cipher list,
and client default to the non-CBC ciphers.
Also, cipher order preference is modified so that best and highest-bit count
ciphers are most preferred.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
The main Dockerfile to was updated - this update brings the
sub-directory specific file inline with it.
Fixes#12866
Signed-off-by: Brian Exelbierd <bex@pobox.com>
Adding in other areas per comments
Updating with comments; equalizing generating man page info
Updating with duglin's comments
Doug is right here again;fixing.
Signed-off-by: Mary Anthony <mary@docker.com>
This is breaking various setups where the host's rootfs is mount shared
correctly and breaks live migration with bind mounts.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
The "TestChangesWithChanges" case randomlly fails on my development
VM with the following errors:
```
--- FAIL: TestChangesWithChanges (0.00s)
changes_test.go:201: no change for expected change C /dir1/subfolder != A /dir1/subfolder/newFile
```
If I apply the following patch to changes_test.go, the test passes.
```diff
diff --git a/pkg/archive/changes_test.go b/pkg/archive/changes_test.go
index 290b2dd..ba1aca0 100644
--- a/pkg/archive/changes_test.go
+++ b/pkg/archive/changes_test.go
@@ -156,6 +156,7 @@ func TestChangesWithChanges(t *testing.T) {
}
defer os.RemoveAll(layer)
createSampleDir(t, layer)
+ time.Sleep(5 * time.Millisecond)
os.MkdirAll(path.Join(layer, "dir1/subfolder"), 0740)
// Let's modify modtime for dir1 to be sure it's the same for the two layer (to not having false positive)
```
It seems that if a file is created immediately after the directory is created,
the `archive.Changes` function could't recognize that the parent directory of
the new file is modified.
Perhaps the problem may reproduce on machines with low time precision?
I had successfully reproduced the failure on my development VM as well as
a VM on DigitalOcean.
Signed-off-by: Shijiang Wei <mountkin@gmail.com>
no longer load hide critical code such as in .integration-daemon-{start,stop},
if this step failed, it will had logged the corresponding module before:
---> Making bundle: .integration-daemon-start (in bundles/1.7.0-dev/daemon-start)
which is nicer to debug.
This will make it also easier to execute a single tests in an interactive shell.
$ make shell
docker> . hack/make.sh binary .integration-daemon-start .integration-daemon-setup
docker> docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
docker> go test github.com/docker/docker/integration-cli
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
This patch ensures no auth headers are set for v1 registries if there
was a 302 redirect.
This also ensures v2 does not use authTransport.
Signed-off-by: Tibor Vass <tibor@docker.com>
Minor tweak to the quoted/json form and made man page look like the Dockerfile
docs. W/o the `,` people may think there should be a space delimited list.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Build cache uses pgk/tarsum to get a digest of content which is
ADD'd or COPY'd during a build. The builder has always used v0 of
the tarsum algorithm which includes mtimes however since the whole
file is hashed anyway, the mtime doesn't really provide any extra
information about whether the file has changed and many version
control tools like Git strip mtime from files when they are cloned.
This patch updates the build subsystem to use v1 of Tarsum which
explicitly ignores mtime when calculating a digest. Now ADD and
COPY will result in a cache hit if only the mtime and not the file
contents have changed.
NOTE: Tarsum is NOT a meant to be a cryptographically secure hash
function. It is a best-effort approach to determining if two sets of
filesystem content are different.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Show how to use `systemctl show` and recommend against modifying
system unit files in `/usr` and `/lib`.
Fixes#13796.
Signed-off-by: Eric-Olivier Lamey <eo@lamey.me>
When the daemon is going down trigger immediate
garbage collection of libnetwork resources deleted
like namespace path since there will be no way to
remove them when the daemon restarts.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Update get and set functions to use digests.
Update push code to use the digest type instead of string
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Move graph related functions in image to graph package.
Consolidating graph functionality is the first step in refactoring graph into an image store model.
Subsequent refactors will involve breaking up graph into multiple types with a strongly defined interface.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The scratch image used to be a regular image, but as of
commit 8936789919 it is a
special case, and cannot be used with 'docker pull.'
Update this doc to reflect the new behavior and clear up
confusion surrounding this image.
Signed-off-by: Christy Perez <christy@linux.vnet.ibm.com>
Labels are metadata that apply to a particular resource: image,
container, maybe volumes and networks in the future. We shouldn't have
containers inherit from its image labels: they are not the same obejcts,
and labels cannot be interpreted in the way.
It remains possible to apply metadata to an image using the LABEL
Dockerfile instruction, to query them using `docker inspect <img>`, or
to filter images on them using `docker images --filter <key>=<value>`.
Fixes#13770.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
This patch creates a new `tlsconfig` package to handle creation of
secure-enough TLS configurations for clients and servers.
The package was created by refactoring TLS code in the client and the
daemon. After this patch, it is expected that all code creating TLS
configurations use this `tlsconfig` package for greater security,
consistency and readability.
On the server side, this fixes a bug where --tlsverify was not taken
into account. Now, if specified, it will require the client to
authenticate.
Signed-off-by: Tibor Vass <tibor@docker.com>
Previous versions of libcontainer allowed CpuShares that were greater
than the maximum or less than the minimum supported by the kernel, and
relied on the kernel to do the right thing. Newer libcontainer fails
after creating the container if the requested CpuShares is different
from what was actually created by the kernel, which breaks compatibility
with earlier Docker Remote API versions. This change explicitly adjusts
the requested CpuShares in API versions < 1.20.
Signed-off-by: Samuel Karp <skarp@amazon.com>
Remove reference to experimental releases as it is really a nightly
channel rather than a scheduled release.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
container.config.NetworkDisabled is set for both daemon's
DisableNetwork and --networking=false case. Hence using
this flag instead to fix#13725.
There is an existing integration-test to catch this issue,
but it is working for the wrong reasons.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
I added 301 redirects from dockerproject.com to dockerproject.org but may as
well make sure everything is updated anyways.
Signed-off-by: Jessica Frazelle <princess@docker.com>
This removes complexity of current implementation and makes the test
correct and assert the right things.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Fixes#13107. This change enables Go duration strings
computed relative to the client machine’s time to be used
as input parameters to `docker events --since/--until`
and `docker logs --since` arguments.
Added unit tests for pkg/timeutils.GetTimestamp as well.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
And removing unused code.
- tarsum.go :
NewTarSumHash could be non exported (for now)
NewTarSumForLabel is never used, except for the tests
- fileinfosums.go:
SortByPos is never used, except for the tests
- versionning.go:
GetVersions is never used, expect for the tests
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Refactoring in Docker 1.7 changed the behavior to add this header where as Docker <= 1.6 wouldn't emit this Header on a HTTP 302 redirect.
This closes#13649
Signed-off-by: Jeffrey van Gogh <jvg@google.com>
It should not print to STDOUT so that it only prints the debugTransport
output if there was an error in one of the registry tests.
Signed-off-by: Tibor Vass <tibor@docker.com>
Fix - Download button does not download
Users got confused when Kitematic is not being downloaded after clicking on the download button, and instead got brought to a screen to teach them how to download Kitematic.
The additional step caused a significant drop in Kitematic downloads. This pull request fixes the issue, to allow users to directly download Kitematic after clicking on the Download button.
Signed-off-by: Michael Chiang <michael.chiang@docker.com>
Move some calls to container.LogEvent down lower so that there's
less of a chance of them being missed. Also add a few more events
that appear to have been missed.
Added testcases for new events: commit, copy, resize, attach, rename, top
Signed-off-by: Doug Davis <dug@us.ibm.com>
Using "DEST" for our build artifacts inside individual bundlescripts was already well-established convention, but this officializes it by having `make.sh` itself set the variable and create the directory, also handling CYGWIN oddities in a single central place (instead of letting them spread outward from `hack/make/binary` like was definitely on their roadmap, whether they knew it or not; sneaky oddities).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Noticed that there were a few newlines in the middle of a \`...\` blocks that
made the text look funny when displayed in HTML.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Change CLI error msg because it was too specific and didn't make sense
when there were errors not related to inaccessible files.
Removed some log.Error() calls since they're not really errors we should
log. Returning the error will be enough.
Closes: #13417
Signed-off-by: Doug Davis <dug@us.ibm.com>
It is already possible to set labels at commit when using the API. But
it is not present in the API documentation. Added an integration test
too, to validate this work (and will be in the future).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Merge user specified devices correctly with default devices.
Otherwise the user specified devices end up without permissions.
Signed-off-by: David R. Jenni <david.r.jenni@gmail.com>
To ensure manifest integrity when pulling by digest, this changeset ensures
that not only the remote digest provided by the registry is verified but also
that the digest provided on the command line is checked, as well. If this check
fails, the pull is cancelled as with an error. Inspection also should that
while layers were being verified against their digests, the error was being
treated as tech preview image signing verification error. This, in fact, is not
a tech preview and opens up the docker daemon to man in the middle attacks that
can be avoided with the v2 registry protocol.
As a matter of cleanliness, the digest package from the distribution project
has been updated to latest version. There were some recent improvements in the
digest package.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This highlights `RUN`, `CMD`, and `ENTRYPOINT` lines using shell highlighting. It doesn't bother detecting the JSON forms, but that's OK because JSON arrays highlight pretty reasonably with shell highlights. :)
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Ubuntu Precise has a number of warts that made it non-trivial to add initially, but I've managed to work through some of them and come up with a working build. Two important parts to note are that it has neither the `btrfs` nor the `devicemapper` graphdriver backends since `btrfs-tools` and `libdevmapper-dev` in the precise repositories are too ancient for them to even compile.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
When using a scanner, log lines over 64K will crash the Copier with
bufio.ErrTooLong. Subsequently, the ioutils.bufReader will grow without
bound as the logs are no longer being flushed to disk.
Signed-off-by: Burke Libbey <burke.libbey@shopify.com>
This ensures that AppArmor, not other mechanisms used
by Docker or the kernel is restricting the mount.
Signed-off-by: Eric Windisch <eric@windisch.us>
This will now properly check whether /etc/init.d/docker or service docker is
invoking the script and respond to the user accordingly.
Signed-off-by: Steven Richards <steven@axiomzen.co>
daemon.Diff already implements mounting for naivegraphdriver and
aufs which does diffing on its owns does not need the container to be mounted.
So new filesystem driver should mount filesystems on their own if it is needed
to implement Diff(). This issue was reported by @kvasdopil while working on a
freebsd port, because freebsd does not allow mount an already mounted
filesystem. Also it saves some cycles for other operating systems as well.
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
I ran into a situation where I was trying:
`docker rmi busybox`
and it kept failing saying:
`could not find image: Prefix can't be empty`
While I have no idea how I got into this situation, it turns out this is
error message is from `daemon.canDeleteImage()`. In that func we loop over
all containers checking to see if they're using the image we're trying to
delete. In my case though, I had a container with no ImageID. So the code
would die tryig to find that image (hence the "Prefix can't be empty" err).
This would stop all processing despite the fact that the container we're
checking had nothing to do with 'busybox'.
My change logs the bad situation in the logs and then skips that container.
There's no reason to fail all `docker rmi ...` calls just because of one
bad container.
Will continue to try to figure out how I got a container w/o an ImageID
but as of now I have no idea, I didn't do anything but normal docker cli
commands.
Signed-off-by: Doug Davis <dug@us.ibm.com>
- 79 char line length (non-command).
- Consistent single space between sentences.
- Replace start of line tabs with spaces.
- Remove trailing white space.
- Consistent "**Note:**" style.
https://docs.docker.com/project/doc-style/#notes
- Replace the ``` sections with indented code.
Signed-off-by: Lloyd Dewolf <foolswisdom@gmail.com>
Fixes a regression from the volumes refactor where the vfs graphdriver
was setting labels for volumes to `s0` so that they can both be written
to by the container and shared with other containers.
When moving away from vfs this was never re-introduced.
Since this needs to happen regardless of volume driver, this is
implemented outside of the driver.
Fixes issue where `z` and `Z` labels are not set for bind-mounts.
Don't lock while creating volumes
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch is extending the qualifiers on the -v command to allow
an admin to tell the system to relabel, content. There might be a
need for something similar for changing the DAC Permissions.
Signed-off-by: Jessica Frazelle <princess@docker.com>
UnmountVolumes used to also unmount 'specialMounts' but it no longer does after
a recent refactor of volumes. This patch corrects this behavior to include
unmounting of `networkMounts` which replaces `specialMounts` (now dead code).
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
The v2 registry will act as a pull-through cache, and needs to be
handled differently by the client to the v1 registry mirror.
See docker/distribution#459 for details
Configuration
Only one v2 registry can be configured as a mirror. Acceptable configurations
in this chanage are: 0...n v1 mirrors or 1 v2 mirror. A mixture of v1 and v2
mirrors is considered an error.
Pull
If a v2 mirror is configured, all pulls are redirected to that mirror. The
mirror will serve the content locally or attempt a pull from the upstream mirror,
cache it locally, and then serve to the client.
Push
If an image is tagged to a mirror, it will be pushed to the mirror and be
stored locally there. Otherwise, images are pushed to the hub. This is
unchanged behavior.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Having the line break in the middle of a code span caused the line break to appear on the web site version, even though it doesn't appear in the preview.
The other two changes are just small grammar improvements.
Signed-off-by: don <donkirkby@gmail.com>
I'm fairly consistently seeing an error in
DockerSuite.TestContainerApiRestartNotimeoutParam:
docker_api_containers_test.go:969:
c.Assert(status, check.Equals, http.StatusNoContent)
... obtained int = 500
... expected int = 204
And in the daemon logs I see:
INFO[0003] Container 8cf77c20275586b36c5095613159cf73babf92ba42ed4a2954bd55dca6b08971 failed to exit within 0 seconds of SIGTERM - using the force
ERRO[0003] Handler for POST /containers/{name:.*}/restart returned error: Cannot restart container 8cf77c20275586b36c5095613159cf73babf92ba42ed4a2954bd55dca6b08971: [2] Container does not exist: container destroyed
ERRO[0003] HTTP Error err=Cannot restart container 8cf77c20275586b36c5095613159cf73babf92ba42ed4a2954bd55dca6b08971: [2] Container does not exist: container destroyed
statusCode=500
Note the "container destroyed" error message. This is being generatd by
the libcontainer code and bubbled up in container.Kill() as a result of the
call to `container.killPossiblyDeadProcess(9)` on line 439.
See the comment in the code, but what I think is going on is that because we
don't have any timeout on the Stop() call we immediate try to force things to
stop. And by the time we get into libcontainer code the process just finished
stopping due to the initial signal, so this secondary sig-9 fails due to the
container no longer running (ie. its 'destroyed').
Since we can't look for "container destroyed" to just ignore the error, because
some other driver might have different text, I opted to just ignore the error
and keep going - with the assumption that if it couldnt send a sig-9 to the
process then it MUST be because its already dead and not something else.
To reproduce this I just run:
curl -v -X POST http://127.0.0.1:2375/v1.19/containers/8cf77c20275586b36c5095613159cf73babf92ba42ed4a2954bd55dca6b08971/restart
a few times and then it fails with the HTTP 500.
Would like to hear some other ideas on to handle this since I'm not
thrilled with the proposed solution.
Signed-off-by: Doug Davis <dug@us.ibm.com>
* Don't AllocateNetwork when network is disabled
* Don't createNetwork in execdriver when network is disabled
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Continues 11858 by:
- Making sure the exit code is always zero when we ask for help
- Making sure the exit code isn't zero when we print help on error cases
- Making sure both short and long usage go to the same stream (stdout vs stderr)
- Making sure all docker commands support --help
- Test that all cmds send --help to stdout, exit code 0, show full usage, no blank lines at end
- Test that all cmds (that support it) show short usage on bad arg to stderr, no blank line at end
- Test that all cmds complain about a bad option, no blank line at end
- Test that docker (w/o subcmd) does the same stuff mentioned above properly
Signed-off-by: Doug Davis <dug@us.ibm.com>
We should let user create container even if the container he wants
join is not running, that check should be done at start time.
In this case, the running check is done by getIpcContainer() when
we start container.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
We already vendor distribution under ./vendor, but
because the GOPATH is /go:/go/src/github.com/.../vendor
Go will always compile the source code at /go not in ./vendor.
Apart from the fact that it is very inconvenient during
development, it was also a time-bomb: someone vendors a fix
from upstream distribution, but forgets to update
REGISTRY_COMMIT in the Dockerfile, and the binary doesn't get
the fix.
Signed-off-by: Tibor Vass <tibor@docker.com>
Sometimes container.cleanup() can be called from multiple paths
for the same container during error conditions from monitor and
regular startup path. So if the container network has been already
released do not try to release it again.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Mary Anthony <mary@docker.com>
Adding experimental features into the mix
Signed-off-by: Mary Anthony <mary@docker.com>
renaming file
Signed-off-by: Mary Anthony <mary@docker.com>
Because I just used it somewhere else and it would be nice if I didn't have to copy and paste the code.
Signed-off-by: David Calavera <david.calavera@gmail.com>
The DOCKER_EXPERIMENTAL environment variable drives the activation of
the 'experimental' build tag.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Give Docker more time to kill containers before upstart kills Docker.
The default kill timeout is 5 seconds.
This will help decrease the chance of but not eliminate the chance of
orphaned container processes.
Signed-off-by: David Xia <dxia@spotify.com>
If a container was started with a non-root user the container
may not be able to resolve DNS names because of too restrictive
permission in the /etc/resolv.conf container file. This problem
is in how this file gets created in libnetwork and ths PR
attempts to fix the issue by vendoring in the libnetwork code
with the fix.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
As part of this some generic packages like iptables, etchosts and resolvconf
have also been moved to libnetwork. Even though they can still be
consumed in a generic fashion they will reside and be maintained
from within the libnetwork project.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Updated Dockerfile to satisfy libnetwork GOPATH requirements.
- Reworked daemon to allocate network resources using libnetwork.
- Reworked remove link code to also update network resources in libnetwork.
- Adjusted the exec driver command population to reflect libnetwork design.
- Adjusted the exec driver create command steps.
- Updated a few test cases to reflect the change in design.
- Removed the dns setup code from docker as resolv.conf is entirely managed
in libnetwork.
- Integrated with lxc exec driver.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
This stops us from erroneously adding "squeeze-lts" to "oldstable" which is now "wheezy", not "squeeze" (but "oldoldstable" _is_ squeeze, hence the new check on `/etc/debian_version` being `6.*` instead, and done as a `case` for the eventual addition of `wheezy-lts`, etc).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
This patch removes the need for requestFactories and decorators
by implementing http.RoundTripper transports instead.
It refactors some challenging-to-read code.
NewSession now takes an *http.Client that can already have a
custom Transport, it will add its own auth transport by wrapping
it.
The idea is that callers of http.Client should not bother
setting custom headers for every handler but instead it should
be transparent to the callers of a same context.
This patch is needed for future refactorings of registry,
namely refactoring of the v1 client code.
Signed-off-by: Tibor Vass <tibor@docker.com>
Not 100% sure why our Windows test don't complain about some of these,
I'm guessing it because we have bash as part of some git package, but
either way we really shouldn't require bash to run our tests unless we
really need to - which in these cases we don't
Signed-off-by: Doug Davis <dug@us.ibm.com>
The intention of the user is to download a verified image if explicitly
pulling with a digest and falling back to v1 registry circumvents that
protection.
Signed-off-by: Nuutti Kotivuori <naked@iki.fi>
In cases where this is failing it's ok to have the test take extra time,
but we don't want it to fail because of some race/performance
differences between systems.
So make the timeout go to 30s and double the sleep time in between
checks so it's not pounding the daemon quite so fast.
Originally I couldn't make this test fail (pre-change), but changed
graphdrivers and saw a failure pretty quickly.
This change seems to smooth that out.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently check-config.sh just said enable or missing, when I used
a fresh kernel, made check-config.sh happy, still can't start
container. It take me days debuging kernel and Docker and finally
found it's because I enabled some CONFIGs as modules and never
loaded these modules.
So I think it's necessary to let check-config.sh told users which
configs are enabled as modules.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
when the daemon can't download the image from a `docker import` the
error message was lost due to 'err' being redefined with a block by
mistake. This removes the ":" from "... err := " which fixes it.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Fix for #13175.
This change allows user-input timestamps (e.g. to `docker events
--since/--until` or `docker logs --since` to be parsed using
standard RFC3339Nano layout in Go instead of the layout that parses
all timestamps into fixed-length strings (currently buggy).
User inputs need not to be complying to the internal format
(`RFC3339NanoFixed`) anyway.
Added test case for `events --since/--until` with all possible
timestamp input formats.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Prior to this patch, the response of
- GET /images/json
- GET /containers/json
- GET /images/(name)/history
display the Created Time as UNIX format which doesn't make sense.
These should be more readable as CLI command `docker inspect` shows.
Due to the case that an older client with a newer version daemon, we
need the version check for now.
Signed-off-by: Hu Keping <hukeping@huawei.com>
TestLogsSince used to rely on time synchronization and precision of
the timestamps. This change provides a less flaky alternative.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
- noplog driver pkg for '--log-driver=none' (null object pattern)
- centralized factory for log drivers (instead of case/switch)
- logging drivers registers themselves to factory upon import
(easy plug/unplug of drivers in daemon/logdrivers.go)
- daemon now doesn't start with an invalid log driver
- Name() method of loggers is actually now their cli names (made it useful)
- generalized Read() logic, made it unsupported except json-file (preserves
existing behavior)
Spotted some duplication code around processing of legacy json-file
format, didn't touch that and refactored in both places.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Previously the cache was only updated once on startup, because the graph
code only check for filesystems on startup. However this breaks the API as it
was supposed and so unit tests.
Fixes#13142
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Add handler for SIGUSR1 based on feedback regarding when to dump
goroutine stacks. This will also dump goroutine stack traces on SIGQUIT
followed by a hard-exit from the daemon.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Previous fix used %q which incorrectly go-escaped things. For example:
```
RUN echoo A \& B C
```
would result in the user seeing:
```
INFO[0000] The command '/bin/sh -c echoo A \\& B\tC' returned a non-zero code: 127
```
Note the double-\ and the \t instead of a tab character
The testcase had to double escape things due to logrus getting in the way
but I'm going to fix that in another PR because its a change to the UX.
Signed-off-by: Doug Davis <dug@us.ibm.com>
If firewalld is not installed (or I suppose not running), firewalld was
producing an error in the daemon init logs, even though firewalld is not
required for iptables stuff to function.
The firewalld library code was also logging directly to logrus instead
of returning errors.
Moved logging code higher up in the stack and changed firewalld code to
return errors where appropriate.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
I believe this was failing because 'nc' wouldn't show the data
it received sometimes. So intead of looking for that data we now
look for the output of the echo that comes after the nc command
successfully runs
Signed-off-by: Doug Davis <dug@us.ibm.com>
Generation based on CAP_LAST_CAP, I hardcoded
capability.CAP_BLOCK_SUSPEND as last for systems which has no
/proc/sys/kernel/cap_last_cap
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
The docker graph call driver.Exists() on initialisation for each filesystem in
the graph. This results will results in a lot `zfs get all` commands. To reduce
this, retrieve all descend filesystem at startup and cache it for later checks
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
instead of let zfs automaticly mount datasets, mount them on demand using mount(2).
This speed up this graph driver in 2 ways:
- less zfs processes needed to start a container
- /proc/mounts get smaller, so zfs userspace tools has less to read (which can
a significant amount of data as the number of layer grows)
This ways it can be also ensured that the correct mountpoint is always used.
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Previously, we've taken advantage of the fact that libcontainer's `update-vendor.sh` is the same syntax as Docker's `vendor.sh` with some shell magic. This changes that to copy libcontainer's dependencies into this file explicitly so that we can scale to more projects with varying methods of vendoring (assuming they don't use import re-writing, which screws up everyone).
We'll need to stay diligent in making sure this list matches what's in libcontainer's `update-vendor.sh` (minus the not-required codegangsta/cli dep), but that's a fair trade-off for being able to scale our dependency model better (and track new discrete dependencies more directly).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Before this PR the list of commands that were printed for the help
text was statically put into the flags.Usage() function via main.init(). This
made it impossible to modify later on when we add new commands
via plugins.
This PR moves the list of commands (name & description) into a structure
that is sorted and printed dynamically by the Usage func. This will allow
the code to add to the list of commands after the init() func is done
but before the help text is printed for the user.
This just moves code around - it should have no UX impact at all.
Signed-off-by: Doug Davis <dug@us.ibm.com>
* daemon creation wasn't parallel to request buffering
* it was possible that empty volume will be created in
/var/run/docker.sock by some container
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add tests for mounting into /proc and /sys
These two locations should be prohibited from mounting volumes into
those destinations.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Also, `curl` is smart enough to see when the consumer of the pipe is going slow that it should slow down the transfer, so this gives a reasonable indication of extraction progress too.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
This makes the "Buffering to disk" part of `docker push` 70% faster in
my use-case (having already applied #12833).
fsync'ing here serves no valuable purpose: if the drive's operation is
interrupted, so it the program's, and this archive has no value other
than the immediate and transient one.
Signed-off-by: Burke Libbey <burke.libbey@shopify.com>
The lxc code here is doing the exact same thing on calling
execdriver.Terminate, so let's just use that.
Also removes some dead comments originally introduced
50144aeb42 but no longer relevant since we
have restart policies.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fixes the part of #12996 that I forgot. 👼
This also fixes a minor path issue (there's no `libexec` in Debian), and fixes a minor bug with the `debVersion` parsing.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
To account for "/" not working in filenames, we replace it with "_" for our temporary files (that exist only to emulate Bash 4's associative arrays in Bash 3).
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
`lxc-stop` does not support sending arbitrary signals.
By default, `lxc-stop -n <id>` would send `SIGPWR`.
The lxc driver was always sending `lxc-stop -n <id> -k`, which always
sends `SIGKILL`. In this case `lxc-start` returns an exit code of `0`,
regardless of what the container actually exited with.
Because of this we must send signals directly to the process when we
can.
Also need to set quiet mode on `lxc-start` otherwise it reports an error
on `stderr` when the container exits cleanly (ie, we didn't SIGKILL it),
this error is picked up in the container logs... and isn't really an
error.
Also cleaned up some potential races for waitblocked test.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When RUN returns with a non-zero return code it prints the command
that was executed as a Go []string:
```
INFO[0000] The command &{[/bin/sh -c noop a1 a2]} returned a non-zero code: 127
```
instead it should look like this:
```
INFO[0000] The command "/bin/sh -c noop a1 a2" returned a non-zero code: 127
```
Signed-off-by: Doug Davis <dug@us.ibm.com>
This fixes an issue where the build output for the "Steps" would look like:
```
Step 1: RUN echo hi echo hi
```
instead of
```
Step 1: RUN echo hi
```
Also, I noticed that there were no checks to make sure invalid Dockerfile
cmd flags were caught on cmds that didn't use cmd flags at all. They would
have been caught on the cmds that had flags, but cmds that didn't bother
to add a new code for flags would have just ignored them. So, I added
checks to each cmd to flag it.
Added testcases for issues.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This change adds a new docker-in-docker dynamic binary make target which
builds a centos container for creating the dynamically linked binary.
To use it, you first must create the static binary and then call the
dind-dynbinary target. You can call it like:
$ hack/make.sh binary dind-dynbinary rpm
This would then package the dynamic binary into the rpm after having
created it in the centos build container. Unfortunately with this approach
you can't create the rpms and the debs with the same command. They have to
be created separately otherwise the wrong version (static vs. dynamic) gets
packaged.
Various RPM fixes including:
- Adding missing RPM dependencies.
- Add sysconfig configuration files to the RPM.
- Add an epoch to silence the fpm warning.
- Remove unnecessary empty package.
Signed-off-by: Patrick Devine <patrick.devine@docker.com>
Signed-off-by: Chad Metcalf <chad@docker.com>
The `--userland-proxy` daemon flag makes it possible to rely on hairpin
NAT and additional iptables routes instead of userland proxy for port
publishing and inter-container communication.
Usage of the userland proxy remains the default as hairpin NAT is
unsupported by older kernels.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
To help avoid version mismatches between libcontainer and Docker, this updates libcontainer to be the source of truth for which version of logrus the project is using. This should help avoid potential incompatibilities in the future, too. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Daniel Zhang <jmzwcn@gmail.com>
Remove empty line after client.CmdInspect docstring
fix#12706
Signed-off-by: Daniel Zhang <jmzwcn@gmail.com>
Remove empty line after client.CmdInspect docstring
fix#12706
Signed-off-by: Daniel Zhang <jmzwcn@gmail.com>
See https://github.com/docker-library/docker/issues/2 for some of the context around this; essentially, we're looking to create an official `docker` image that includes the Docker CLI (and the dependencies necessary for easy Docker-in-Docker), but it makes sense to use the `docker` namespace for that image. The `docker-dev` official image is already builds of Docker's own `Dockerfile` (but specifically of releases), so this seemed like a good fit. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Turns out that `-f` on a file that's in `.dockerignore` actually does work. No idea why it wasn't when I was doing this before, but oh well! 🤘
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
With this, `docker pull deb<tab>` will show all `debian:*` tags, as before, but `docker pull -a deb<tab>` will complete directly to just `debian`. 👍
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Right now devicemapper mounts thin device using online discards by default
and passes mount option "discard". Generally people discourage usage of
online discards as they can be a drain on performance. Instead it is
recommended to use fstrim once in a while to reclaim the space.
In case of containers, we recommend to keep data volumes separate. So
there might not be lot of rm, unlink operations going on and there might
not be lot of space being freed by containers. So it might not matter
much if we don't reclaim that free space in pool.
User can still pass mount option explicitly using dm.mountopt=discard to
enable discards if they would like to.
So this is more like setting the containers by default for better performance
instead of better space efficiency in pool. And user can change the behavior
if they don't like default behavior.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Minor thing but docker cp --help was:
Copy files/folders from a PATH on the container to a HOSTDIR on the host
running the command. Use '-' to write the data
as a tar file to STDOUT.
This changes it to:
Copy files/folders from a PATH on the container to a HOSTDIR on the host
running the command. Use '-' to write the data as a tar file to STDOUT.
The \n made the output look funky.
Signed-off-by: Doug Davis <dug@us.ibm.com>
This patch modifies the journald log driver to store the container ID in
a field named CONTAINER_ID, rather than (ab)using the MESSAGE_ID field.
Additionally, this adds the CONTAINER_ID_FULL field containing the
complete container ID and CONTAINER_NAME, containing the container name.
When using the journald log driver, this permits you to see log messages
from a particular container like this:
# journalctl CONTAINER_ID=a9238443e193
Example output from "journalctl -o verbose" includes the following:
CONTAINER_ID=27aae7361e67
CONTAINER_ID_FULL=27aae7361e67e2b4d3864280acd2b80e78daf8ec73786d8b68f3afeeaabbd4c4
CONTAINER_NAME=web
Closes: #12864
Signed-off-by: Lars Kellogg-Stedman <lars@redhat.com>
prioritize the ports with static mapping before dynamic mapping. This removes
the port conflicts when we allocate static port in the reserved range
together with dynamic ones.
When static port is allocated first, Docker will skip those when determining
free ports for dynamic ones.
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
We encountered a situation where concurrent invocations of the docker daemon on a machine with an older version of iptables led to nondeterministic errors related to simultaenous invocations of iptables.
While this is best resolved by upgrading iptables itself, the particular situation would have been avoided if the docker daemon simply took care not to concurrently invoke iptables. Of course, external processes could also cause iptables to fail in this way, but invoking docker in parallel seems like a pretty common case.
Signed-off-by: Aaron Davidson <aaron@databricks.com>
The `-N` option is not compatible with the `-O` option of wget (see the man page).
The example command now matches the example in the script on http://get.docker.com/.
Signed-off-by: Nik Nyby <nikolas@gnu.org>
This adds support for Dockerfile commands to have options - e.g:
COPY --user=john foo /tmp/
COPY --ignore-mtime foo /tmp/
Supports both booleans and strings.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Before, inspect cont1 cont2 shows:
[{
xxx
}
,{
xxx
}
]
After, it shows:
[
{
xxx
}
,{
xxx
}
]
Because `func (*Encoder) Encode` always followed by a newline character,
so it's difficult to put '}' and ']' one the same line.
To get symmetry, above is our choice.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
The existing page is focused on listing a set of requirements for
proposing a new repository. This information has become outdated and is
duplicated in the `docker-library/official-images` and
`docker-library/docs` GitHub repositories. This PR rewrites the
Official Repositories page to describe what they actually are, and
defers to GitHub/IRC for the subset of users that are interested in
contributing. I also removed the requirement to contact
partners@docker.com and made it optional to reduce the barrier to entry.
Signed-off-by: Peter Salvatore <peter@psftw.com>
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <jess@docker.com> (github: jfrazelle)
docs: crop and optimize images
Cropped and optimized images.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
Testing and updating the Windows material
Signed-off-by: Mary Anthony <mary@docker.com>
checkpoint
Signed-off-by: Mary Anthony <mary@docker.com>
Fitting the Windows specific material into the contributor guide
Signed-off-by: Mary Anthony <mary@docker.com>
Entering James comments
Signed-off-by: Mary Anthony <mary@docker.com>
If we tear through a few layers of abstraction, we can get at the inodes
contained in a directory without having to stat all the files. This
allows us to eliminate identical files much earlier in the changelist
generation process.
Signed-off-by: Burke Libbey <burke@libbey.me>
When a container has errors on removal, it gets flagged as dead.
If you `docker rm -f` a dead container the container is dereffed from
the daemon and doesn't show up on `docker ps` anymore... except that the
container JSON file may still be lingering around and becomes undead
when you restart the daemon.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
in https://docs.docker.com/articles/ambassador_pattern_linking/
svendowideit/ambassador images is from docker-ut built using this script
and uses socat but socat complains as follows
socat: error while loading shared libraries: libreadline.so.5: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file: No such file or directory
socat: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory
/usr/lib/x86_64-linux-gnu/lib{crypto,ssl}.so* lib are symlinks so removing -P option from cp
adding libreadline.so and libtinfo.so
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
update libssl.so path
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
Remove mkimage-unittest.sh
Signed-off-by: Jinsoo Park <cellpjs@gmail.com>
ParseRestartPolicy is useful function for third party go programs to use
so that they can parse the restart policy in the same way that Docker
does
Signed-off-by: Darren Shepherd <darren@rancher.com>
statsCollector.publishers must be protected to prevent
modifications during the iteration in run().
Being locked for a long time is bad, so pairs of containers &
publishers (pointers) are copied to release the lock fast.
Signed-off-by: Anton Tiurin <noxiouz@yandex.ru>
Add tests on:
- changes.go
- archive.go
- wrap.go
Should fix#11603 as the coverage is now 81.2% on the ``pkg/archive``
package. There is still room for improvement though :).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Several parts of the codebase didn't use the correct path sanitisation
wrappers. Now that the wrappers have been exposed, use those.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Due to the importance of path safety, the internal sanitisation wrappers
for volumes and containers should be exposed so other parts of Docker
can benefit from proper path sanitisation.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Assuming that docker kill is trying to actually kill the container
is a mistake. If the container is not running we should report it
back to the caller as a error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Regan McCooey <rmccooey27@aol.com> (github: rmccooey27)
Docker-DCO-1.1-Signed-off-by: Regan McCooey <rmccooey27@aol.com> (github: rhatdan)
If memory cgroup is mounted, memory limit is always supported,
no need to check if these files are exist.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This also moves `exec -i` test to _unix_test.go because it seems to need a
pty to reliably reproduce the behavior.
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
Since docker test suite is now using gocheck, ``defer
deleteContainer(…)`` is not needed anymore.
Fixes#12705
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
From the Bash manual's `set -e` description:
(https://www.gnu.org/software/bash/manual/bashref.html#index-set)
> Exit immediately if a pipeline (see Pipelines), which may consist of a
> single simple command (see Simple Commands), a list (see Lists), or a
> compound command (see Compound Commands) returns a non-zero status.
> The shell does not exit if the command that fails is part of the
> command list immediately following a while or until keyword, part of
> the test in an if statement, part of any command executed in a && or
> || list except the command following the final && or ||, any command
> in a pipeline but the last, or if the command’s return status is being
> inverted with !. If a compound command other than a subshell returns a
> non-zero status because a command failed while -e was being ignored,
> the shell does not exit.
Additionally, further down:
> If a compound command or shell function executes in a context where -e
> is being ignored, none of the commands executed within the compound
> command or function body will be affected by the -e setting, even if
> -e is set and a command returns a failure status. If a compound
> command or shell function sets -e while executing in a context where
> -e is ignored, that setting will not have any effect until the
> compound command or the command containing the function call
> completes.
Thus, the only way to have our `.integration-daemon-stop` script
actually run appropriately to clean up our daemon on test/script failure
is to use `trap ... EXIT`, which we traditionally avoid because it does
not have any stacking capabilities, but in this case is a reasonable
compromise because it's going to be the only script using it (for now,
at least; we can evaluate more complex solutions in the future if they
actually become necessary).
The alternatives were much less reasonable. One is to have the entire
complex chains in any script wanting to use `.integration-daemon-start`
/ `.integration-daemon-stop` be chained together with `&&` in an `if`
block, which is untenable. The other I could think of was taking the
body of these scripts out into separate scripts, essentially meaning
we'd need two files for each of these, which further complicates the
maintenance.
Add to that the fact that our `trap ... EXIT` is scoped to the enclosing
subshell (`( ... )`) and we're in even more reasonable territory with
this pattern.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
We need this, so client can get error from stream and not from status
code, which is already 200, because write to ResponseWriter was occured.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
When docker pull a non-existent repo, daemon will report "image xxx not found"
with an error code 500, which should be 404.
This commit add 404 "not found" mapping and refactor httpError function.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Currently `docker inspect -f` use json.Unmarshal() unmarshal
to interface, it will store all JSON numbers in float64, so
we use `docker inspect 4f0d73b75a0d | grep Memory` and
`docker inspect -f {{.HostConfig.Memory}} 4f0d73b75a0d` will
get different values.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
- Mount struct now called volumeMount
- Merged volume creation for each volume type (volumes-from, binds, normal
volumes) so this only happens in once place
- Simplified container copy of volumes (for when `docker cp` is a
volume)
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Parse the history output to locate the size fields and check
whether they are the correct format or not. Use Column name SIZE
to mark start and end indices of the size fields
Fixes#12578
Signed-off-by: Ankush Agarwal <ankushagarwal11@gmail.com>
https://www.kali.org/ is a Debian derivative. This script completes
succesfully using the Debian install path
Signed-off-by: Andrew Martin <sublimino@gmail.com>
If device is being reactivated before it could go away and deferred
deactivation is scheduled on it, cancel it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Deferred reove functionality was added to library later. So in old version
of library it did not report deferred_remove field.
Create a new function which also gets deferred_remove field and it will be
called only on newer version of library.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
If a device has been scheduled for deferred deactivation and container
is started again and we need to activate device again, we need to cancel
the deferred deactivation which is already scheduled on the device.
Create a method for the same.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This will help with debugging as one could just do "docker info" and figure
out of deferred removal is enabled or not.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Provide a new command line knob dm.deferred_device_removal which will enable
deferred device deactivation if driver and library support it.
This patch also checks for library support and driver version.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
A lot of time device mapper devices leak across mount namespace which docker
does not know about and when docker tries to deactivate/delete device,
operation fails as device is open in some mount namespace.
Create a mechanism where one can defer the device deactivation/deletion
so that docker operation does not fail and device automatically goes
away when last reference to it is dropped.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
libdm started offering deferred remove functionality from version
1.02.89. As docker still builds against older libdm, define a tag
libdm_no_deferred_remove to determine whether we are compiling
against new libdm or older one and enable/disable deferred remove
functionality accordingly.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
When ever something vendor/ changes the go dependencies have to downloaded again,
which requires internet access and there for is potential slow. COPY and go install is much faster, while the git urls does not change not this often.
Signed-off-by: Jörg Thalheim <joerg@higgsboson.tk>
Thanks to @dmcgowan for noticing.
Added a testcase to make sure Save() can create the dir and then
read from it.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Though I am not clear on the intent of the sentence if it means that existing data in the base image is copied into the new volume then the additions I propose make that more clear than the present language.
Signed-off-by: Kent Johnson <kentoj@gmail.com>
This PR does the following:
- migrated ~/.dockerfg to ~/.docker/config.json. The data is migrated
but the old file remains in case its needed
- moves the auth json in that fie into an "auth" property so we can add new
top-level properties w/o messing with the auth stuff
- adds support for an HttpHeaders property in ~/.docker/config.json
which adds these http headers to all msgs from the cli
In a follow-on PR I'll move the config file process out from under
"registry" since it not specific to that any more. I didn't do it here
because I wanted the diff to be smaller so people can make sure I didn't
break/miss any auth code during my edits.
Signed-off-by: Doug Davis <dug@us.ibm.com>
It is simplifies code and lead to next refactoring step, where daemon
will be incorporated to some structure which represents API.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
When firewalld (or iptables service) restarts/reloads,
all previously added docker firewall rules are flushed.
With firewalld we can react to its Reloaded() [1]
D-Bus signal and recreate the firewall rules.
Also when firewalld gets restarted (stopped & started)
we can catch the NameOwnerChanged signal [2].
To specify which signals we want to react to we use AddMatch [3].
Libvirt has been doing this for quite a long time now.
Docker changes firewall rules on basically 3 places.
1) daemon/networkdriver/portmapper/mapper.go - port mappings
Portmapper fortunatelly keeps list of mapped ports,
so we can easily recreate firewall rules on firewalld restart/reload
New ReMapAll() function does that
2) daemon/networkdriver/bridge/driver.go
When setting a bridge, basic firewall rules are created.
This is done at once during start, it's parametrized and nowhere
tracked so how can one know what and how to set it again when
there's been firewalld restart/reload ?
The only solution that came to my mind is using of closures [4],
i.e. I keep list of references to closures (anonymous functions
together with a referencing environment) and when there's firewalld
restart/reload I re-call them in the same order.
3) links/links.go - linking containers
Link is added in Enable() and removed in Disable().
In Enable() we add a callback function, which creates the link,
that's OK so far.
It'd be ideal if we could remove the same function from
the list in Disable(). Unfortunatelly that's not possible AFAICT,
because we don't know the reference to that function
at that moment, so we can only add a reference to function,
which removes the link. That means that after creating and
removing a link there are 2 functions in the list,
one adding and one removing the link and after
firewalld restart/reload both are called.
It works, but it's far from ideal.
[1] https://jpopelka.fedorapeople.org/firewalld/doc/firewalld.dbus.html#FirewallD1.Signals.Reloaded
[2] http://dbus.freedesktop.org/doc/dbus-specification.html#bus-messages-name-owner-changed
[3] http://dbus.freedesktop.org/doc/dbus-specification.html#message-bus-routing-match-rules
[4] https://en.wikipedia.org/wiki/Closure_%28computer_programming%29
Signed-off-by: Jiri Popelka <jpopelka@redhat.com>
Two main things
- Create a real struct Info for all of the data with the proper types
- Add test for REST API get info
Signed-off-by: Hu Keping <hukeping@huawei.com>
THe port tests in integration-cli tests just for the port-mapping as
seen by Docker daemon. But it doesn't perform a more indepth testing by
checking for the exposed port on the host.
This change helps to fill that gap.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Single value labels do not work in 1.6 and multi-label instructions only work when separated by non-EOL whitespace.
I also added an example snip from the inspect output with the labels that are included in this guide.
Signed-off-by: Jeff Nickoloff <jeff@allingeek.com>
- Compose teamhad forgotten some documentation
- Updated ENV for Distribution also
- Forgot one of the readability sections
Signed-off-by: Mary Anthony <mary@docker.com>
Changed method declaration. Fixed all calls to dockerCmd
method to reflect the change.
resolves#12355
Signed-off-by: bobby abbott <ttobbaybbob@gmail.com>
- sort inspect out
- update output fields
- format output
- add doc about go template
- other minor fix
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This patch changes two things
1. Set facility to LOG_DAEMON
2. Remove ": " from tag so that the tag + pid become a single column in
the log
Signed-off-by: Darren Shepherd <darren@rancher.com>
Without adding the user to the group you're going to hit nasty TLS errors. Figured I'd save the next guy the hassle.
Problem more accurately described here:
https://github.com/docker/docker/issues/5314
Signed-off-by: Jason Divock <jdivock@box.com>
sockRequest now makes the status code available in the returned
values. This helps avoid string checking for non-HttpStatusOK(=200)
yet successful error messages.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Check test correctness of untar by comparing destination with
source. For part 2, it checkes hashes of source and destination
files or the target files of symbolic links.
This is a supplement to the #11601 fix.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
Instead of seeding/polluting the global random instance,
creating a local `rand.Random` instance which provides the same
level of randomness.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Before this, a storage driver would be defaulted to based on the
priority list, and only print a warning if there is state from other
drivers.
This meant a reordering of priority list would "break" users in an
upgrade of docker, such that there images in the prior driver's state
were now invisible.
With this change, prior state is scanned, and if present that driver is
preferred.
As such, we can reorder the priority list, and after an upgrade,
existing installs with prior drivers can have a contiguous experience,
while fresh installs may default to a driver in the new priority list.
Ref: https://github.com/docker/docker/pull/11962#issuecomment-88274858
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Everything else was gone from this file except these utils which are
being used in other files and can't yet be removed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This test is already being skipped, and is also fully tested by
`TestRunContainerWithRmFlagExitCodeNotEqualToZero`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: Megan Kostick <mkostick@us.ibm.com>
Alphabetize FSMagic list to make more human-readable.
Signed-off-by: Megan Kostick <mkostick@us.ibm.com>
Check whether the swap limit capabilities are disabled or not only when memory swap is set to greater than 0.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is a symlink to the latest "bundle" that was assembled. For example, if `VERSION` is currently `1.5.0-dev`, then `bundles/latest` will be a symlink to `bundles/1.5.0-dev` after an attempted build.
One interesting property of this is that after a successful `binary` build, we can `./bundles/latest/binary/docker -v` and get back something like `Docker version 1.5.0-dev, build 3ff6723-dirty`.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Testcase TestBuildResourceConstraintsAreUsed run build without
--no-cache, so if you run this test twice, it will fail the
second time.
TESTFLAGS='-v -run ^TestBuildResourceConstraintsAreUsed$' ./hack/make.sh binary test-integration-cli
[PASSED]
TESTFLAGS='-v -run ^TestBuildResourceConstraintsAreUsed$' ./hack/make.sh binary test-integration-cli
[FAIL]
Because we'll use cID to inspect field and will get empty cID
if we have cache.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
After finding our initial thinking on env. space versus arg list space
was wrong, we need to solve this by using a pipe between the caller and
child to marshall the (potentially very large) options array to the
archiver.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Updates most of the instances of HTTP urls in the engine's
comments. Does not account for any use in the code itself,
documentation, contrib, or project files.
Signed-off-by: Eric Windisch <eric@windisch.us>
using standard unix postfixes add unit test for display
also change doc for memory usage display change
for example GiB will be GB
Signed-off-by: Sun Jianbo <wonderflow@zju.edu.cn>
If an image has been tagged to multiple repos and tags, 'docker
rmi -f IMAGE_ID' will just untag one random repo instead of
untagging all and deleting the image. This patch implement
this. This commit is composed of:
*untag all names and delete the image
*add test to this feature
*modify commandline/cli.md to explain this
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
This provides an override for forcing the daemon to still attempt
running the devicemapper driver even when udev sync is not supported.
Intended to be a very clear impairment for those choosing to use it. If
udev sync is false, there will still be an error in the daemon logs,
even when the override is in place. The docs have an explicit WARNING.
Including link to the docs for users that encounter this daemon error
during an upgrade.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
As reported in #11294, the Docker daemon will execute contains it
shouldn't run in the event that a requested tag is present in an image's
ID. This leads to the wrong image being started up silently.
This change reduces the risk of such a collision by using the short ID
iff the actual revOrTag looks like a short ID (not that it necessarily
is).
Signed-off-by: Richard Burnison <rburnison@ebay.com>
This will assure that the install script will not
begin executing until after it has been downloaded should
it be utilized in a 'curl | bash' workflow.
Signed-off-by: Eric Windisch <eric@windisch.us>
This patch include the following fixs:
- fix image name error when docker ps
- fix docker events test failure: use the exact image name for filter
- fix docker build CI test failure due to "docker events" change
Because of change of daemon log behavior. Now we record
the exact Image name as you typed. So docker run -d busybux sh
and docker run -d busybox:latest are not the same in the log.
So it will affect the docker events. So change the related CI
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
This also seemed to be checking the ordering of the events, which
doesn't seem like something we sould be interested in this particular
test.
Added check to make sure the filtered events have the expected ID's.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
`TestInfoEnsureSucceeds` is supposed to check existence of all
expected fields that are going to be shown in `docker info` command.
If this list was complete, it could have helped catching the missing
`"Logging Driver:"` regression.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
This flag is passed to the daemon CLI. In my opinion, "Container's
logging driver" is not accurate and refers to 'one container'.
Also the `syslog` driver was missing from the list. Having the list
of all logging drivers won't scale here (should be <80 chars per line)
and we have `rotation` driver coming up in the pipeline as well (gh11485).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
When we tag an Image with several names and we run one of them,
The "create" job will log this event with
+job log(create, containerID, Imagename).
And the "Imagename" is always the first one (sorted). It is the
same to "start/stop/rm" jobs. So use the correct name instand.
This PR refer to #10479
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Preventing the test execution to pollute the deterministic runtime environment
by seeding the global rand.Random.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Check test correctness of untar by comparing destination with
source. For part one, it only compares the directories.
This is a supplement to the #11601 fix.
Signed-off-by: Yestin Sun <yestin.sun@polyera.com>
Corrected integer size passed to Windows
Corrected DisableEcho / SetRawTerminal to not modify state
Cleaned up and made routines more idiomatic
Corrected raw mode state bits
Removed duplicate IsTerminal
Corrected off-by-one error
Minor idiomatic change
Signed-off-by: Brendan Dixon <brendand@microsoft.com>
Updated Windows installation documentation with newest
screencasts and Chocolatey instructions to install windows
client CLI.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
registry/SearchResults was missing the "is_automated" field.
I added it back in.
Pull this 'table' removal one from the others because it fixed
a bug too
Signed-off-by: Doug Davis <dug@us.ibm.com>
* when no containers are returned, go test would then aborts with:
panic: runtime error: index out of range
Signed-off-by: Todd Whiteman <todd.whiteman@joyent.com>
Right now we try device removal at the interval of 10ms and keep on trying
till either device is removed or 10 seconds are over. That means if device
is busy, we will try 1000 times in those 10 seconds.
Sounds too high a frequency of deivce removal retrial. All the logs are
filled easily. I think it is a good idea to slow down a bit and retry at
the interval of 100ms instead of 10ms.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
During device removal, we are first waiting for device to close() in a tight
loop for 10 seconds. I am not sure why do we need it. First of all we come
here once the umount() is successful so device should be free. For some reason
of device is temporarily busy, then removeDevice() logic retries device removal
logic in a loop for 10 seconds and that should cover it. Can't see why one
more 10 seoncds loop is required before attempting device removal.
One loop should be able to cover all the temporary device busy conditions and
if condition is not temporary then 10 seconds loop is not going to help anyway.
So instead of two loops of 10 seconds each, I am converting it to a single
loop of 20 seconds. May be 10 second loop is good enough but for now I am
keeping it 20 seconds to avoid any regressions.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Currently in device removal path (device deactivation), we wait
for 10 seconds for devive to actually go away. waitRemove().
In current code this is not required. If dm removal task has completed
and one has done the wait on udev cookie, then device is gone and there
is no need to write another loop to wait for device removal.
This patch removes the waitRemove() which waits for 10 seconds after
device removal. This seems unnecessary.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
UdevWait() is deferred and takes uint cookie as an argument. As arguments
to deferred functions are calculated at the time of call, it is possible
that any update to cookie later by libdm are not taken into account when
UdevWait() is called. Hence use a pointer to uint as argument to UdevWait()
function.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
devmapper graph driver retries device removal 1000 times in case of failure
and if this fills up console with 1000 messages (when daemon is running in
debug mode). So remove these debug messages.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
There are issues with libdm logging. Right now if docker daemon is run
in debug mode, logging by libdm is too verbose. And if a device can't
be removed, thousands of messages fill the console and one can not see
what's going on.
This patch removes devicemapper.LogInitVerbose() call as that call will
only work if docker was not registering its own log handler with libdm.
For some reason docker registers one with libdm and libdm hands over
all the messages to docker (including debug ones). And now it is up to
devmapper backend to figure out which ones should go to console and
which ones should not.
So by default log only fatal messages from libdm. One can easily modify
the code to change it for debugging purposes.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
add a pair of accent mark around dockerfile commands
in docker-commit, as the same thing in docker-import.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Some bullet lists didn't render as bullet-lists because
of a missing newline.
Also added missing "label" filter for `docker ps` and
slightly re-worded the header above the supported filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I have seen a lot of people try to do this and reach out to me on how to mount
/dev/snd because it is returning "not a device node". The docs imply you can
_just_ mount /dev/snd and that is not the case. This fixes that. It also allows
for coolness if you want to mount say /dev/usb.
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <hugs@docker.com> (github: jfrazelle)
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <jess@docker.com> (github: jfrazelle)
Docker-DCO-1.1-Signed-off-by: Jessica Frazelle <jess@docker.com> (github: jfrazelle)
When working with Go channels you must not set it to nil or else the
channel will block forever. It will not panic reading from a nil chan
but it blocks. The correct way to do this is to create the channel then
close it as the correct results to the caller will be returned.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Fixes: #11552
- scalable SVG
- uses colours from the rest of the page
- emphasizes that boot2docker is the ordinary Linux setup in a VM
- Add new graphic for architecture diagram
- Add windows boot2docker diagram
- Add windows diagram to documentation
- Remove old PNGs; replaced with SVGs
- Add redirects for new SVG versions of installation diagrams
Signed-off-by: Nick Irvine <nfirvine@nfirvine.com>
I can never get it to work for me when its just 3 seconds.
With this change it generates the OOM message around 17 seconds, but
I increased the timeout to 30 for people with slower machines
Signed-off-by: Doug Davis <dug@us.ibm.com>
This makes `registry.Service` a first class type and does not use jobs
to interact with this type.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Syslog was a heading-2, but should be heading-3;
changed the headings to heading-4 to match the
"network settings" section.
Also changed "Log driver" to "logging driver" for JSON.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Closing activationLock only if it's not closed already. This is needed
only because integration tests using docker code directly and doesn't
care about global state.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Update registry package to use the v2 registry api from distribution. Update interfaces to directly take in digests.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
It's about time to let folks not hit 'vfs', when 'overlay' is supported
on their kernel. Especially now that v3.18.y is a long-term kernel.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Currently the progress reader won't close properly by not setting the close size.
fixes#11849
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Api requesting port for daemon before init_networkdriver called.
Problem is that now initialization of api depends on initialization of
daemon and their intializations runs in parallel. Proper fix will be
just do it sequentially. For now I don't want refactor it, because it
can bring additional problems in 1.6.0.
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Do not remove container if any of the resource could not be cleaned up. We
don't want to leak resources.
Two new states have been created. RemovalInProgress and Dead. Once container
is Dead, it can not be started/restarted. Dead container signifies the
container where we tried to remove it but removal failed. User now needs to
figure out what went wrong, corrent the situation and try cleanup again.
RemovalInProgress signifies that container is already being removed. Only
one removal can be in progress.
Also, do not allow start of a container if it is already dead or removal is
in progress.
Also extend existing force option (-f) to docker rm to not return an error
and remove container from user view even if resource cleanup failed.
This will allow a user to get back to old behavior where resources
might leak but atleast user will be able to make progress.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Docker does not know about our named cpuacct,cpu,cpuset cgroup
hierarchy with multiple subsystems in it. So to use them with docker
in integration-cli test TestRunWithCpuset inside docker container
we need to add symlinks to them in hack/dind script.
Example:
old version of parser will do:
cat /proc/1/cgroup
11:cpu,cpuacct,name=my_cpu_cpuacct:/
...
and create and mount this hierarchy to directory
/cgroup/cpu,cpuacct,name=my_cpu_cpuacct/
so docker cannot find it because it has strange name
in new parser directory will be same as on host
/cgroup/my_cpu_cpuacct
and have symlinks for docker to find it
/cgroup/cpu -> /cgroup/my_cpu_cpuacct
/cgroup/cpuacct -> /cgroup/my_cpu_cpuacct
in other case if where is no name
cat /proc/1/cgroup
11:cpu,cpuacct:/
...
mount will be same for both parsers
/cgroup/cpu,cpuacct
and new one will also create symlinks
/cgroup/cpu -> /cgroup/cpu,cpuacct
/cgroup/cpuacct -> /cgroup/cpu,cpuacct
Signed-off-by: Pavel Tikhomirov <ptikhomirov@parallels.com>
This has a few hacks in it but it ensures that the bridge driver does
not use global state in the mappers, atleast as much as possible at this
point without further refactoring. Some of the exported fields are
hacks to handle the daemon port mapping but this results in a much
cleaner approach and completely remove the global state from the mapper
and allocator.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Once the job has failed and is respawned, the status becomes `docker
respawn/post-start` after subsequent failures (as opposed to `docker
stop/post-start`), so the post-start script needs to take this into
account.
I could not find specific documentation on the job transitioning to the
`respawn/post-start` state, but this was observed on Ubuntu 14.04.2.
Signed-off-by: Lewis Marshall <lewis@lmars.net>
If job "acceptconnections" is called before "serveapi" the API Accept()
method will hang forever waiting for activation. This is due to the fact
that when "acceptconnections" ran the activation channel was nil.
Signed-off-by: Darren Shepherd <darren@rancher.com>
When buffering to file add support for compressing the tar contents. Since digest should be computed while writing buffer, include digest creation during buffer.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Installs and configures bash completion for Docker.
Note that bash completion still has to be initialized by a custom
.bashrc file.
Signed-off-by: Harald Albers <github@albersweb.de>
Generally, when using Remote API to push images there needs a http Header
X-Registry-Auth.
For compatibility if there was no authConfig header, everything will be
okay if a proper JSON-http-body was applied.
But when both X-Registry-Auth Header and the Body are missing, due to
the function of decode JSON, it will return an EOF error which was not
very clear to user.
So I think we can make the respone error be more nice.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Boot2Docker experience is updated now that we have a Docker
client on Windows. Instead of running `boot2docker ssh`, users
can also use boot2docker on Windows Command Prompt (`cmd.exe`)
and PowerShell.
Updated documentation and screenshots, added a few details,
reorganized sections by importance, fixed a few errors.
Remaining: the video link in the Demonstration section needs
to be updated once I shoot a new video.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
dockerize-image tool takes a virtual disk image file
and creates a Docker image based on it. You can
specify a base Docker image to make this tool create
an image that will contain only filesystem diff
instead of full filesystem.
See tools usage for details.
Signed-off-by: Maxim Kulkin <maxim.kulkin@gmail.com>
These images was just sitting around and referenced from
nowhere, nor they seemed any useful.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The git model uses `upstream master` to refer to the branch on
the remote repository, and `upstream/master` to refer to the
local cache of the upstream branch.
I did not explain the difference in the docs (that seemed a bit
excessive), but I did clarify the instructions so that it refers
to the correct concept in each place.
Signed-off-by: Katrina Owen <katrina.owen@gmail.com>
This change makes `monitorTtySize` work correctly on windows by polling
into win32 API to get terminal size (because there's no SIGWINCH on
windows) and send it to the engine over Remove API properly.
Average getttysize syscall takes around 30-40 ms on an average windows
machine as far as I can tell, therefore in a `for` loop, checking every
250ms if size has changed or not.
I'm not sure if there's a better way to do it on windows, if so,
somebody please send a link 'cause I could not find.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
This change fixes a bug where stdout/stderr handles are not identified
correctly.
Previously we used to set the window size to fixed size to fit the default
tty size on the host (80x24). Now the attach/exec commands can correctly
get the terminal size from windows.
We still do not `monitorTtySize()` correctly on windows and update the tty
size on the host-side, in order to fix that we'll provide a
platform-specific `monitorTtySize` implementation in the future.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
We now advise people to configure docker group and
add to sudo. Mac shouldn't use sudo. Removed sudo
from command examples. Left in installation to be removed
in installation doc sweep -- removing requires finer
grain control.
Signed-off-by: Mary Anthony <mary@docker.com>
We now have instructions in our Unix installs about setting up
docker group to avoid sudo. Also, Mac/Windows shouldn't use
sudo. So, I've removed sudo from our examples and added a
section at the top reminding them that if they have to use
sudo to run docker they can change that.
Signed-off-by: Mary Anthony <mary@docker.com>
Set cpuset to "0" so that it works on single core machines.
W/o this (and set to "1") we'll see something like this error
when running:
System error: write /cgroup/cpuset/docker/66689499bbd08cd8dccc9b7bfd1d6b34e85d73ce8c84d3c69b5e91944322da60/docker/79d7c548b58c85c4cfad6cd01eb7c3b30db254d1014c496137edd93ddc528a6f/cpuset.cpus: invalid argument"
Signed-off-by: Doug Davis <dug@us.ibm.com>
This patch causes `The image you are pulling has been verified` status
message to be produced also when the repository is pulled for the first
time.
Signed-off-by: Michal Minar <miminar@redhat.com>
Since `dirperm1` requires a more recent aufs patch than many current OS release,
we cant remove #783 completely. This documents that docker will apply `dirperm1`
automatically for systems that support it
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
Automatically detect support for aufs `dirperm1` option and apply it.
`dirperm1` tells aufs to check the permission bits of the directory on the
topmost branch and ignore the permission bits on all lower branches.
It can be used to fix aufs' permission bug (i.e., upper layer having
broader mask than the lower layer).
More information about the bug can be found at https://github.com/docker/docker/issues/783
`dirperm1` man page is at: http://aufs.sourceforge.net/aufs3/man.html
Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com>
c79b9bab54 (Remove engine.Status and replace it with standard go error)
cause a regression that create container won't get any warnings, we still
need this to send useful informations to user.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
We removed it, because upstream removed it. But now it will be coming
back, so work with it either way.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
The validation script from #10681 is too pedantic, and does not handle
well situations like:
```
cat <<EOF # or <<-EOF
Whether the leading whitespace is stripped out or not by bash
it should still be considered as valid.
EOF
```
This reverts commit 4e65c1c319.
Signed-off-by: Tibor Vass <tibor@docker.com>
Having the list in one spot makes it easier for people to see what's
avaiable instead of having to scan all of the docs and extract the info.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Fixes#10958 by moving utils.daemon to pkg.pidfile.
Test cases were also added.
Updated the daemon to use the new pidfile.
Signed-off-by: Rick Wieman <git@rickw.nl>
Continuation of: #11660, working on issue #11626.
Wrapped portmapper global state into a struct. Now portallocator and
portmapper have no global state (except configuration, and a default
instance).
Unfortunately, removing the global default instances will break
```api/server/server.go:1539```, and ```daemon/daemon.go:832```, which
both call the global portallocator directly. Fixing that would be a much
bigger change, so for now, have postponed that.
Signed-off-by: Paul Bellamy <paul.a.bellamy@gmail.com>
For positerity (largely of packagers) lets leave around the generated
version files that happen during build.
They're already ignored in git, and recreated on every build.
Signed-off-by: Vincent Batts <vbatts@redhat.com>
This disables recently added ANSI emulation feature in certain Windows
shells (like ConEmu) where ANSI output is emulated by default with builtin
functionality in the shell.
MSYS (mingw) runs in cmd.exe window and it doesn't support emulation.
Cygwin doesn't even pass terminal handles to docker.exe as far as I can
tell, stdin/stdout/stderr handles are behaving like non-TTY. Therefore not
even including that in the check.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
The problem is when I create container though REST api, set memory limit
in hostConfig, the memory limit didn't work. Because when we DecodeEnv,
we got hostConfig part of Env like this:
{"Binds":["/:/tmp"],"CpuShares":512,"CpusetCpus":"0,1","Devices":[],"Memory":1.6777216e+07,"MemorySwap":0}
And we cannot unmarshal number 1.6777216e+07 into Go value of type int64,
so we got 0.
We can fix this by setting Decoder as UseNumber().
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
They say we should only use the BTRFS_LIB_VERSION
They will no longer support this since it had to be managed manually
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
container.
docker run -v /dev:/dev should stop mounting other default mounts in i
libcontainer otherwise directories and devices like /dev/ptx get mishandled.
We want to be able to run libvirtd for launching vms and it needs
access to the hosts /dev. This is a key componant of OpenStack.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The previous state assumed that the HOSTPATH argument referred to a
file. As clarified by moxiegirl in PR #11305, it is a directory.
Adjusted completion to reflect this.
Signed-off-by: Harald Albers <github@albersweb.de>
on overlay fs, the mtime of directories changes in a container where new
files are added in an upper layer (e.g. '/etc'). This flags the
directory as a change where there was none.
Closes#9874
Signed-off-by: Vincent Batts <vbatts@redhat.com>
Created a validation that detects all trailing whitespaces from every
text file that isn't *.go, *.md, vendor/*,
docs/theme/mkdocs/tipuesearch*
Removed trailing whitespaces from every text file except from vendor/*
builder/parser/testfiles*, docs/theme/mkdocs/tipuesearch* and *.md
Signed-off-by: André Martins <martins@noironetworks.com>
Fixes#9981
Allows a volume which was created by docker (ie, in
/var/lib/docker/vfs/dir) to be used as a Bind argument via the container
start API and overwrite an existing volume.
For example:
```bash
docker create -v /foo --name one
docker create -v /foo --name two
```
This allows the volume from `one` to be passed into the container start
API as a bind to `two`, and it will overwrite it.
This was possible before 7107898d5c
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
2015-02-10 20:46:37 -05:00
2292 changed files with 333869 additions and 131921 deletions
+ `commit --change` to apply specified Dockerfile instructions while committing the image
+ `import --change` to apply specified Dockerfile instructions while importing the image
+ Builds no longer continue in the background when canceled with CTRL-C
#### Client
+ Windows Support
@@ -291,7 +464,7 @@
#### Hack
* Clean up "go test" output from "make test" to be much more readable/scannable.
* Excluse more "definitely not unit tested Go source code" directories from hack/make/test.
* Exclude more "definitely not unit tested Go source code" directories from hack/make/test.
+ Generate md5 and sha256 hashes when building, and upload them via hack/release.sh.
- Include contributed completions in Ubuntu PPA.
+ Add cli integration tests.
@@ -571,7 +744,7 @@ With the ongoing changes to the networking and execution subsystems of docker te
* The ADD instruction now supports caching, which avoids unnecessarily re-uploading the same source content again and again when it hasn’t changed
* The new ONBUILD instruction adds to your image a “trigger” instruction to be executed at a later time, when the image is used as the base for another build
* Docker now ships with an experimental storage driver which uses the BTRFS filesystem for copy-on-write
* Docker is officially supported on Mac OSX
* Docker is officially supported on Mac OSX
* The Docker daemon supports systemd socket activation
## 0.7.6 (2014-01-14)
@@ -625,12 +798,12 @@ With the ongoing changes to the networking and execution subsystems of docker te
- Fix ADD caching issue with . prefixed path
- Fix docker build on devicemapper by reverting sparse file tar option
- Fix issue with file caching and prevent wrong cache hit
* Use same error handling while unmarshalling CMD and ENTRYPOINT
* Use same error handling while unmarshalling CMD and ENTRYPOINT
#### Documentation
* Simplify and streamline Amazon Quickstart
* Install instructions use unprefixed fedora image
* Install instructions use unprefixed Fedora image
* Update instructions for mtu flag for Docker on GCE
+ Add Ubuntu Saucy to installation
- Fix for wrong version warning on master instead of latest
@@ -805,7 +978,7 @@ With the ongoing changes to the networking and execution subsystems of docker te
* Improve unit tests
* The test suite now runs all tests even if one fails
* Refactor C in Go (Devmapper)
- Fix OSX compilation
- Fix OSX compilation
## 0.7.0 (2013-11-25)
@@ -823,7 +996,7 @@ With the ongoing changes to the networking and execution subsystems of docker te
#### Runtime
* Improve stability, fixes some race conditons
* Improve stability, fixes some race conditions
* Skip the volumes mounted when deleting the volumes of container.
* Fix layer size computation: handle hard links correctly
# Maintainers are expected to comment on the design of the pull request.
# Review of documentation is expected only in the context of design validation,
# not for stylistic changes.
#
# Ideally, documentation should reflect the expected behavior of the code.
# No code review should take place in this step.
#
# Once design is approved, a maintainer should make sure to remove this label
# and add the next one.
close = "design rejected"
3-docs-review = "proposals with only documentation changes"
2-code-review = "general case"
# Code review
[Rules.review.states.2-code-review]
# Maintainers are expected to review the code and ensure that it is good
# quality and in accordance with the documentation in the PR.
#
# If documentation is absent but expected, maintainers should ask for documentation.
#
# All tests should pass.
#
# Once code is approved according to the rules of the subsystem, a maintainer
# should make sure to remove this label and add the next one.
close = ""
1-design-review = "raises design concerns"
4-merge = "trivial change not impacting documentation"
3-docs-review = "general case"
# Docs review
[Rules.review.states.3-docs-review]
# Maintainers are expected to review the documentation in its bigger context,
# ensuring consistency, completeness, validity, and breadth of coverage across
# all extent and new documentation.
#
# They should ask for any editorial change that makes the documentation more
# consistent and easier to understand.
#
# Once documentation is approved (see below), a maintainer should make sure to remove this
# label and add the next one.
close = ""
2-code-review = "requires more code changes"
1-design-review = "raises design concerns"
4-merge = "general case"
# Docs approval
[Rules.review.docs-approval]
# Changes and additions to docs must be reviewed and approved (LGTM'd) by a minimum of two docs sub-project maintainers.
# If the docs change originates with a docs maintainer, only one additional LGTM is required (since we assume a docs maintainer approves of their own PR).
# Merge
[Rules.review.states.4-merge]
# Maintainers are expected to merge this pull request as soon as possible.
# They can ask for a rebase, or carry the pull request themselves.
# These should be the easy PRs to merge.
close = "carry PR"
merge = ""
[Rules.DCO]
title = "Helping contributors with the DCO"
@@ -268,7 +178,7 @@ made through a pull request.
# The chief architect is responsible for the overall integrity of the technical architecture
# across all subsystems, and the consistency of APIs and UI.
#
#
# Changes to UI, public APIs and overall architecture (for example a plugin system) must
# be approved by the chief architect.
"Chief Architect" = "shykes"
@@ -296,7 +206,9 @@ made through a pull request.
[Org.Operators.security]
people = [
"erw"
"erw",
"diogomonica",
"nathanmccauley"
]
[Org.Operators."monthly meetings"]
@@ -313,13 +225,29 @@ made through a pull request.
"crosbymichael"
]
[Org.Operators.community]
people = [
"theadactyl"
]
# The chief maintainer is responsible for all aspects of quality for the project including
# code reviews, usability, stability, security, performance, etc.
# code reviews, usability, stability, security, performance, etc.
# The most important function of the chief maintainer is to lead by example. On the first
# day of a new maintainer, the best advice should be "follow the C.M.'s example and you'll
# be fine".
"Chief Maintainer" = "crosbymichael"
# The community manager is responsible for serving the project community, including users,
# contributors and partners. This involves:
# - facilitating communication between maintainers, contributors and users
# - organizing contributor and maintainer events
# - helping new contributors get involved
# - anything the project community needs to be successful
#
# The community manager is a point of contact for any contributor who has questions, concerns
# or feedback about project operations.
"Community Manager" = "theadactyl"
[Org."Core maintainers"]
# The Core maintainers are the ghostbusters of the project: when there's a problem others
@@ -339,14 +267,16 @@ made through a pull request.
people = [
"unclejack",
"calavera",
"crosbymichael",
"erikh",
"estesp",
"icecrime",
"jfrazelle",
"lk4d4",
"runcom",
"tibor",
"unclejack",
"vbatts",
"vieux",
"vishh"
@@ -359,80 +289,81 @@ made through a pull request.
# has a dedicated group of maintainers, which are dedicated to that subsytem and responsible
# for its quality.
# This "cellular division" is the primary mechanism for scaling maintenance of the project as it grows.
#
#
# The maintainers of each subsytem are responsible for:
#
#
# 1. Exposing a clear road map for improving their subsystem.
# 2. Deliver prompt feedback and decisions on pull requests affecting their subsystem.
# 3. Be available to anyone with questions, bug reports, criticism etc.
#on their component. This includes IRC, GitHub requests and the mailing
#list.
#on their component. This includes IRC, GitHub requests and the mailing
#list.
# 4. Make sure their subsystem respects the philosophy, design and
#road map of the project.
#road map of the project.
#
# #### How to review patches to your subsystem
#
#
# Accepting pull requests:
#
#- If the pull request appears to be ready to merge, give it a `LGTM`, which
# stands for "Looks Good To Me".
#- If the pull request has some small problems that need to be changed, make
# a comment adressing the issues.
#- If the changes needed to a PR are small, you can add a "LGTM once the
# following comments are adressed..." this will reduce needless back and
# forth.
#- If the PR only needs a few changes before being merged, any MAINTAINER can
# make a replacement PR that incorporates the existing commits and fixes the
# problems before a fast track merge.
#
#
#- If the pull request appears to be ready to merge, give it a `LGTM`, which
# stands for "Looks Good To Me".
#- If the pull request has some small problems that need to be changed, make
# a comment adressing the issues.
#- If the changes needed to a PR are small, you can add a "LGTM once the
# following comments are adressed..." this will reduce needless back and
# forth.
#- If the PR only needs a few changes before being merged, any MAINTAINER can
# make a replacement PR that incorporates the existing commits and fixes the
# problems before a fast track merge.
#
# Closing pull requests:
#
#- If a PR appears to be abandoned, after having attempted to contact the
# original contributor, then a replacement PR may be made. Once the
# replacement PR is made, any contributor may close the original one.
#- If you are not sure if the pull request implements a good feature or you
# do not understand the purpose of the PR, ask the contributor to provide
# more documentation. If the contributor is not able to adequately explain
# the purpose of the PR, the PR may be closed by any MAINTAINER.
#- If a MAINTAINER feels that the pull request is sufficiently architecturally
# flawed, or if the pull request needs significantly more design discussion
# before being considered, the MAINTAINER should close the pull request with
# a short explanation of what discussion still needs to be had. It is
# important not to leave such pull requests open, as this will waste both the
# MAINTAINER's time and the contributor's time. It is not good to string a
# contributor on for weeks or months, having them make many changes to a PR
# that will eventually be rejected.
#
#- If a PR appears to be abandoned, after having attempted to contact the
# original contributor, then a replacement PR may be made. Once the
# replacement PR is made, any contributor may close the original one.
#- If you are not sure if the pull request implements a good feature or you
# do not understand the purpose of the PR, ask the contributor to provide
# more documentation. If the contributor is not able to adequately explain
# the purpose of the PR, the PR may be closed by any MAINTAINER.
#- If a MAINTAINER feels that the pull request is sufficiently architecturally
# flawed, or if the pull request needs significantly more design discussion
# before being considered, the MAINTAINER should close the pull request with
# a short explanation of what discussion still needs to be had. It is
# important not to leave such pull requests open, as this will waste both the
# MAINTAINER's time and the contributor's time. It is not good to string a
# contributor on for weeks or months, having them make many changes to a PR
# that will eventually be rejected.
[Org.Subsystems.Documentation]
people = [
"fredlf",
"james",
"sven",
"moxiegirl",
"thaJeztah",
"jamtur01",
"spf13",
"mary"
"sven"
]
[Org.Subsystems.libcontainer]
people = [
"crosbymichael",
"vmarmol",
"mpatel",
"jnagal",
"lk4d4"
"lk4d4",
"mpatel",
"vmarmol"
]
[Org.Subsystems.registry]
people = [
"dmcg",
"dmp42",
"vbatts",
"joffrey",
"jlhawn",
"samalba",
"sday",
"jlhawn",
"dmcg"
"vbatts"
]
[Org.Subsystems."build tools"]
@@ -471,11 +402,27 @@ made through a pull request.
[Org.Subsystem.builder]
people = [
"duglin",
"erikh",
"tibor",
"duglin"
"tibor"
]
[Org.Curators]
# The curators help ensure that incoming issues and pull requests are properly triaged and
# that our various contribution and reviewing processes are respected. With their knowledge of
# the repository activity, they can also guide contributors to relevant material or
# discussions.
#
# They are neither code nor docs reviewers, so they are never expected to merge. They can
# however:
# - close an issue or pull request when it's an exact duplicate
# - close an issue or pull request when it's inappropriate or off-topic
people = [
"thajeztah"
]
[people]
@@ -500,11 +447,26 @@ made through a pull request.
Email = "ben@firshman.co.uk"
GitHub = "bfirsh"
[people.calavera]
Name = "David Calavera"
Email = "david.calavera@gmail.com"
GitHub = "calavera"
[people.cpuguy83]
Name = "Brian Goff"
Email = "cpuguy83@gmail.com"
Github = "cpuguy83"
[people.crosbymichael]
Name = "Michael Crosby"
Email = "crosbymichael@gmail.com"
GitHub = "crosbymichael"
[people.diogomonica]
Name = "Diogo Monica"
Email = "diogo@docker.com"
GitHub = "diogomonica"
[people.duglin]
Name = "Doug Davis"
Email = "dug@us.ibm.com"
@@ -552,7 +514,7 @@ made through a pull request.
[people.jfrazelle]
Name = "Jessie Frazelle"
Email = "jess@docker.com"
Email = "j@docker.com"
GitHub = "jfrazelle"
[people.jlhawn]
@@ -560,21 +522,26 @@ made through a pull request.
Email = "josh.hawn@docker.com"
Github = "jlhawn"
[people.joffrey]
Name = "Joffrey Fuhrer"
Email = "joffrey@docker.com"
Github = "shin-"
[people.lk4d4]
Name = "Alexander Morozov"
Email = "lk4d4@docker.com"
GitHub = "lk4d4"
[people.mary]
[people.moxiegirl]
Name = "Mary Anthony"
Email = "mary.anthony@docker.com"
GitHub = "moxiegirl"
[people.nathanmccauley]
Name = "Nathan McCauley"
Email = "nathan.mccauley@docker.com"
GitHub = "nathanmccauley"
[people.runcom]
Name = "Antonio Murdaca"
Email = "me@runcom.ninja"
GitHub = "runcom"
[people.sday]
Name = "Stephen Day"
Email = "stephen.day@docker.com"
@@ -584,17 +551,27 @@ made through a pull request.
fmt.Fprintln(cli.err,`SECURITY WARNING: You are building a Docker image from Windows against a non-Windows Docker host. All files and directories added to build context will have '-rwxr-xr-x' permissions. It is recommended to double check and reset permissions for sensitive files and directories.`)
// Package client provides a command-line interface for Docker.
//
// Run "docker help SUBCOMMAND" or "docker SUBCOMMAND --help" to see more information on any Docker subcommand, including the full list of options supported for the subcommand.
// See https://docs.docker.com/installation/ for instructions on installing Docker.
flAuthor:=cmd.String([]string{"a","#author","-author"},"","Author (e.g., \"John Hannibal Smith <hannibal@a-team.com>\")")
flChanges:=opts.NewListOpts(nil)
cmd.Var(&flChanges,[]string{"c","-change"},"Apply Dockerfile instruction to the created image")
// FIXME: --run is deprecated, it will be replaced with inline Dockerfile commands.
flConfig:=cmd.String([]string{"#run","#-run"},"","This option is deprecated and will be removed in a future version in favor of inline Dockerfile-compatible commands")
// CmdImport creates an empty filesystem image, imports the contents of the tarball into the image, and optionally tags the image.
//
// The URL argument is the address of a tarball (.tar, .tar.gz, .tgz, .bzip, .tar.xz, .txz) file or a path to local file relative to docker client. If the URL is '-', then the tar file is read from STDIN.
cmd:=Cli.Subcmd("import",[]string{"file|URL|- [REPOSITORY[:TAG]]"},"Create an empty filesystem image and import the contents of the\ntarball (.tar, .tar.gz, .tgz, .bzip, .tar.xz, .txz) into it, then\noptionally tag it.",true)
flChanges:=opts.NewListOpts(nil)
cmd.Var(&flChanges,[]string{"c","-change"},"Apply Dockerfile instruction to the created image")
cmd.Require(flag.Min,1)
cmd.ParseFlags(args,true)
var(
v=url.Values{}
src=cmd.Arg(0)
repository=cmd.Arg(1)
)
v.Set("fromSrc",src)
v.Set("repo",repository)
for_,change:=rangeflChanges.GetAll(){
v.Add("changes",change)
}
ifcmd.NArg()==3{
fmt.Fprintf(cli.err,"[DEPRECATED] The format 'file|URL|- [REPOSITORY [TAG]]' has been deprecated. Please use file|URL|- [REPOSITORY[:TAG]]\n")
// CmdLogin logs in or registers a user to a Docker registry service.
//
// If no server is specified, the user will be logged into or registered to the registry's index server.
//
// Usage: docker login SERVER
func(cli*DockerCli)CmdLogin(args...string)error{
cmd:=Cli.Subcmd("login",[]string{"[SERVER]"},"Register or log in to a Docker registry server, if no server is\nspecified \""+registry.IndexServer+"\" is the default.",true)
// CmdLogout logs a user out from a Docker registry.
//
// If no server is specified, the user will be logged out from the registry's index server.
//
// Usage: docker logout [SERVER]
func(cli*DockerCli)CmdLogout(args...string)error{
cmd:=Cli.Subcmd("logout",[]string{"[SERVER]"},"Log out from a Docker registry, if no server is\nspecified \""+registry.IndexServer+"\" is the default.",true)
// If a private port is specified, it also shows the public-facing port that is NATed to the private port.
//
// Usage: docker port CONTAINER [PRIVATE_PORT[/PROTO]]
func(cli*DockerCli)CmdPort(args...string)error{
cmd:=Cli.Subcmd("port",[]string{"CONTAINER [PRIVATE_PORT[/PROTO]]"},"List port mappings for the CONTAINER, or lookup the public-facing port that\nis NAT-ed to the PRIVATE_PORT",true)
// A running container is stopped by first sending SIGTERM and then SIGKILL if the container fails to stop within a grace period (the default is 10 seconds).
returnnil,"",statusCode,fmt.Errorf("Error: request returned %s for API route and version %s, check if the server supports the requested API version",http.StatusText(statusCode),req.URL)
returnserverResp,fmt.Errorf("Error: request returned %s for API route and version %s, check if the server supports the requested API version",http.StatusText(serverResp.statusCode),req.URL)
}
returnnil,"",statusCode,fmt.Errorf("Error response from daemon: %s",bytes.TrimSpace(body))
returnserverResp,fmt.Errorf("Error response from daemon: %s",bytes.TrimSpace(body))
// Available version information is shown for: client Docker version, client API version, client Go version, client Git commit, client OS/Arch, server Docker version, server API version, server Go version, server Git commit, and server OS/Arch.
// ClientFlags represents flags for the docker client.
typeClientFlagsstruct{
FlagSet*flag.FlagSet
Common*CommonFlags
PostParsefunc()
ConfigDirstring
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Jessie Frazelle
