The mention of NAT is confusing for those coming from pre-host-only networking b2d
Docker-DCO-1.1-Signed-off-by: SvenDowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
Its tricked a number of readers, as its not a TOC, its just local to the
current topic. Now that the docs are not mobile responsive its not an
active UI element either.
Docker-DCO-1.1-Signed-off-by: SvenDowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
If this is at the root directory for the daemon you could unmount
somones filesystem when you stop docker and this is actually only needed
for the palces that the graph drivers mount the container's root
filesystems.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This behavior changed from v0.9 to v0.10, so document it to prevent
any confusion.
Docker-DCO-1.1-Signed-off-by: Matthew Heon <mheon@redhat.com> (github: mheon)
DNS and VolumesFrom were moved to HostConfig and as such are part of the
container start and not create.
For some reason 0.10 docs are correct (except for a missing quote in the
JSON") but 0.11 and latest are not.
Docker-DCO-1.1-Signed-off-by: cpuguy83 <cpuguy83@gmail.com> (github: cpuguy83)
The blkdiscard hack we do on container/image delete is pretty slow, but
required to restore space to the "host" root filesystem. However, it
is pretty useless on raw devices, and you may not need it in development
either.
In a simple test of the devicemapper backend on loopback the time to
delete 20 container went from 11 seconds to 0.4 seconds with
--storage-opt blkdiscard=false.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This adds dm.datadev and dm.metadatadev options that you can use with
--storage-opt to set to specific devices to use for the thin
provisioning pool.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This adds the following --storage-opts for the daemon:
dm.fs: The filesystem to use for the base image
dm.mkfsarg: Add an argument to the mkfs command for the base image
dm.mountopt: Add a mount option for devicemapper mount
Currently supported filesystems are xfs and ext4.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This allows setting these settings to be passed:
dm.basesize
dm.loopdatasize
dm.loopmetadatasize
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If we can't even get the current device mapper driver version, then
we cleanly fail the devmapper driver as not supported and fall back
on the next one.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This does the "reverse" of HumanSize, i.e. maps a string to an int64
using SI prefixes for the extension.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This change touches docker logs, attach, and start -a along with get
exit code in the client.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This patch adds pause/unpause to the command line, api, and drivers
for use on containers. This is implemented using the cgroups/freeze
utility in libcontainer and lxc freeze/unfreeze.
Co-Authored-By: Eric Windisch <ewindisch@docker.com>
Co-Authored-By: Chris Alfonso <calfonso@redhat.com>
Docker-DCO-1.1-Signed-off-by: Ian Main <imain@redhat.com> (github: imain)
When run on a container that is already running, docker always succeeds.
This was an intentional change in v0.10; it previously caused an error.
This commit clarifies the man pages to indicate this is intended behavior.
Docker-DCO-1.1-Signed-off-by: Matthew Heon <mheon@redhat.com> (github: mheon)
These PR does a few things. It ensures that the freezer cgroup is
joined in the systemd driver. It also provides a public api for setting
the freezer state via the cgroups package.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
The systemd support for the devices cgroup lacks two required features:
* Support for wildcards to allow mknod on any device
* Support for wildcards to allow /dev/pts support
The second is available in more recent systemd as "char-pts", but not in e.g. v208 which is in wide use.
Additionally, the current approach of letting systemd set up the devices cgroup and then adding
some devices to it doesn't work, because some times systemd (at least v208) re-initializes
the devices cgroup, overwriting our custom devices. See https://github.com/dotcloud/docker/issues/6009
for the details.
When wildcarded mknod support is available in systemd we should implement a pure systemd version,
but we need to keep the old one around for backwards compat.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This only works if the file or dir is already created in
the image before setting it to be a volume. There is no way around this
because we don't have the data avaliable to set the volume at the
beginning of the dockerfile
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
adding tests and allowing for easy passing of filters.Args from client
to server.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This is a new feature and flag. (replaces the suggestion of a flag for
--untagged images).
The concept is to have a syntax to filter. This begins with this
filtering for the 'images' subcommand, and at that only filtering for
whether images are untagged.
example like: docker rmi $(docker images -q --filter 'untagged=true')
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This patch adds some tests to ensure that quoted flags are properly
handled by the mflag package.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch improves the mflag package to ensure that things arguments
to mflag such as `-flag="var"` or `-flag='var'` have the quotes
stripped from the value (to mirror the getopt functionality for similar
flags).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
* Added User Guide section outlines.
* Added User Guide to menu.
* Moved HTTPS example to articles.
* Replaced Hello World example with User Guide.
* Moved use cases out of examples.
* Updated Introduction to add User Guide.
* Redirected migrated /use and /articles links.
* Added Docker.io section
* Added Dockerized section
* Added Using Docker section
* Added Docker Images section
* Added Docker Links section
* Added Docker Volumes section
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: contrib/man/md/docker-build.1.md
modified: contrib/man/md/docker-run.1.md
modified: contrib/man/md/docker-tag.1.md
This is a fix for a race condition in the LXC driver. This is described
more in issue #6092.
Closes#6092
Docker-DCO-1.1-Signed-off-by: Shane Canon <scanon@lbl.gov> (github: scanon)
This also makes sure that devices are pointers to avoid copies
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
We now have one place that keeps track of (most) devices that are allowed and created within the container. That place is pkg/libcontainer/devices/devices.go
This fixes several inconsistencies between which devices were created in the lxc backend and the native backend. It also fixes inconsistencies between wich devices were created and which were allowed. For example, /dev/full was being created but it was not allowed within the cgroup. It also declares the file modes and permissions of the default devices, rather than copying them from the host. This is in line with docker's philosphy of not being host dependent.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
If a container is started with a memory limit of 0, no memory limit is applied.
To prevent this from causing confusion, make interaction explicit in docs.
Docker-DCO-1.1-Signed-off-by: Matthew Heon <mheon@redhat.com> (github: mheon)
Remove old Stats interface in libcontainers cgroups package.
Changed Stats to use unit64 instead of int64 to prevent integer overflow issues.
Updated unit tests.
Docker-DCO-1.1-Signed-off-by: Vishnu Kannan <vishnuk@google.com> (github: vishh)
There are two cases where we can't use a graphdriver:
1) the graphdriver itself isn't supported by the system
2) the graphdriver is supported by some configuration/prerequisites are
missing
This introduces a new error for the 2) case and uses it when trying to
run docker with btrfs backend on a non-btrfs filesystem.
Docker-DCO-1.1-Signed-off-by: Johannes 'fish' Ziemke <github@freigeist.org> (github: discordianfish)
Docker-DCO-1.1-Signed-off-by: Johan Euphrosine <proppy@google.com> (github: proppy)
rebased by
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
Docker-DCO-1.1-Signed-off-by: Robin Speekenbrink <robin@kingsquare.nl> (github: fruitl00p)
rebased by
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
This adds a COPY command to docker build which works like ADD, but is
only for local files and it doesn't extract files.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
There is no need for this, the device node by itself doesn't work, since
its not on a devpts fs, and we can just a regular file to bind mount over.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
It is no longer necessary to pass "SETUID" or "SETGID" capabilities to
the container when a "user" is specified in the config.
Docker-DCO-1.1-Signed-off-by: Bernerd Schaefer <bj.schaefer@gmail.com> (github: bernerdschaefer)
We don't need ordered set anymore, also some cleanings and simple
benchmark.
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
Tried to clarify some of the semantics regarding --tag and renaming etc.
Added some text clarifying how to detach from a running containers.
Fixed a bug that reference /varlog instead of /dev/log.
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: docker-attach.1.md
modified: docker-build.1.md
modified: docker-run.1.md
modified: docker-tag.1.md
This resolves a problem that I have been having where docker starts before networking is up. See issue #5944 for more details.
Docker-DCO-1.1-Signed-off-by: Jeffrey Bolle <jeffreybolle@gmail.com> (github: jeffreybolle)
This patch adds cli integration tests for #5619, which are tests
to ensure that symlinks are kept relative to the container rootfs
(even when a path component).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the incorrect handling of paths which contain a
symlink as a path component when copying data from a container.
Essentially, this patch changes the container.Copy() method to
first "resolve" the resource by resolving all of symlinks encountered
in the path relative to the container's rootfs (using pkg/symlink).
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Fixes#2586
This fixes a few races where the name generator asks if a name is free
but another container takes the name before it can be reserved. This
solves this by generating the name and setting it. If the set fails
with a non unique error then we try again.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
-single-dash => --double-dash for a few flags, and also there was a missing "B", as in "Container B".
Docker-DCO-1.1-Signed-off-by: Nathan LeClaire <nathan.leclaire@gmail.com> (github: nathanleclaire)
Updated documentation to include CentOS installation instructions.
Extraneous line removal, description change
Docker-DCO-1.1-Signed-off-by: Jim Perrin <jperrin@centos.org> (github: jimperrin)
Fixes#5154
Daemon waiting 15 seconds for finishing server jobs before shutdown. In
this time it doesn't accept new jobs. After this time, it shutdown
despite running jobs.
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
There is no reason to do discard durink mkfs, as the filesystem
is on a newly allocated device anyway. Discard is a slow operation,
so this may help initial startup a bit, especially if you use a larger
thin pool.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
There are a couple of bugfixes since this was last bumped. Pull them in.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
Some basic tests to make sure this is acting correctly on machines.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
If I do a
docker events > /tmp/out
I do not want the control characters getting written to the file.
The check should check the output file not the input file.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
1. Re-aligns the introduction with the new product positioning.
2. Cleanup of some issues with language and formatting.
3. Makes the introduction leaner and meaner.
4. Responds to feedback from product.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
These new scripts are streamlined such that, for example, "contrib/mkimage/debootstrap" is _only_ responsible for filling a directory with the results of running debootstrap, and it can accept any arbitrary arguments.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
I found a bunch of issues where we have "-<opt>" instead of "--<opt>".
Also a couple of other issues, like "-notrunc", which is now "--no-trunc"
Fixes#5963
Docker-DCO-1.1-Signed-off-by: Brian Goff <cpuguy83@gmail.com> (github: cpuguy83)
Add specific types for Required and Optional DeviceNodes
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Fixes#5692
This change requires lxc 1.0+ to work and breaks lxc versions less than
1.0 for host networking. We think that this is a find tradeoff by
bumping docker to only support lxc 1.0
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
We need SETFCAP to be able to mark files as having caps, which is
heavily used by fedora.
See https://github.com/dotcloud/docker/issues/5928
We also need SETPCAP, for instance systemd needs this to set caps
on its childen.
Both of these are safe in the sense that they can never ever
result in a process with a capability not in the bounding set of the
container.
We also add NET_BIND_SERVICE caps, to be able to bind to ports lower
than 1024.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Without this any container startup fails:
2014/05/20 09:20:36 setup mount namespace copy additional dev nodes mknod fuse operation not permitted
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
systemd systems do not require a /etc/hosts file exists since an nss
module is shipped that creates localhost implicitly. So, mounting
/etc/hosts can fail on these sorts of systems, as was reported on CoreOS
in issue #5812.
Instead of trying to bind mount just copy the hosts entries onto the
containers private /etc/hosts.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
This changes the test TestBuildWithInaccessibleFilesInContext to not
add the user 'unprivilegeduser' and add it via the Dockerfile instead.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Fixes#5849
If the host system does not have fuse enabled in the kernel config we
will ignore the is not exist errors when trying to copy the device node
from the host system into the container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This makes the remote API version 1.12 and newer default to
automatically deleting intermediate containers when the build has
succeedeed.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This adds a `--force-rm` flag to docker build which makes the Docker
daemon clean up all containers, even when the build has failed.
This new flag requires that we bump the remote API, so we also bump the
remote API version.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This adds back the rm query parameter to the remote api docs for api
v1.10 and v1.11.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Some applications want to write to /proc. For instance:
docker run -it centos groupadd foo
Gives: groupadd: failure while writing changes to /etc/group
And strace reveals why:
open("/proc/self/task/13/attr/fscreate", O_RDWR) = -1 EROFS (Read-only file system)
I've looked at what other systems do, and systemd-nspawn makes /proc read-write
and /proc/sys readonly, while lxc allows "proc:mixed" which does the same,
plus it makes /proc/sysrq-trigger also readonly.
The later seems like a prudent idea, so we follows lxc proc:mixed.
Additionally we make /proc/irq and /proc/bus, as these seem to let
you control various hardware things.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
For issue #5658 this rewrite of the networking page explains what every
single option (unless I missed one!) does both for the Docker server and
also the Docker client when submitting a "docker run". I somehow
thought that, when I was done, there would be a lot more about setting
up topologies like I did for my Foundations of Python Network
Programming network of Docker containers. More about making routers and
firewalls that NAT and so forth. But, at least for this draft, I think
that setting up subnets and setting up point-to-point links is most of
what Docker users will need unless they are doing something exotic.
We can always expand later.
Docker-DCO-1.1-Signed-off-by: Brandon Rhodes <brandon@rhodesmill.org> (github: brandon-rhodes)
Improve networking.md documentation per @jamtur01
Besides catching some typos and awkward sentences, @jamtur01 had several
more thorough changes to suggest:
* He illustrated the correct way to delimit "Note" paragraphs in
Docker documentation.
* He helped point out where I was presuming an Ubuntu host running
Docker, so that I could re-word those sections to be specific that
the advice only applied to Ubuntu (these mostly related to how to
set server-wide options and restart the server).
* He is happy to have "Ethernet" capitalized even where Linux
documentation would render it with an ugly lower-case first letter.
Docker-DCO-1.1-Signed-off-by: Brandon Rhodes <brandon@rhodesmill.org> (github: brandon-rhodes)
Improve networking.md per ideas from @SvenDowideit
A response to a bit of further discussion of pull request #5884.
Rearrange docker version output so that server output matches client
output
Docker-DCO-1.1-Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> (github: jmccrohan)
This improves the TestBuildSixtySteps test by switching from busybox to
scratch and simply adding a file.
This lowers the execution time of that test from 20 seconds to 5
seconds.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
@vmarmol has made the fix upstream for not failing if the capability
being dropped is returned as invalid from the syscall, which is the case
when the capability is not supported on the host.
This is a blocker presently for RHEL6.5 on CAP_SYSLOG. We have patched
around this in our RPM for the time being, but this is the proper fix.
See also https://github.com/dotcloud/docker/pull/5810
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
After removed, the User-Agent shows in log like this:
[debug] http.go:160 https://index.docker.io/v1/repositories/busybox/images --
HEADERS: map[User-Agent:[docker/0.11.1-dev go/go1.2.2 git-commit/8887e00-dirty kernel/3.14.3-n1 os/linux arch/amd64]]
The code also moved all validation work into validVersion,
to keep the main logic as clean.
Docker-DCO-1.1-Signed-off-by: Derek <crq@kernel.org> (github: crquan)
This commit makes the Docker cli client use ValidateContextDirectory
before attempting to create a tarball out of the context. This ensures
we avoid errors such as "unexpected EOF" during the upload of the
context.
This check is done before uploading any data and can save time and
bandwidth for remote Docker daemons.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This commit adds a function which can be used to ensure all contents of
a directory can be accessed.
This function doesn't follow symlinks to check if they're pointing to
files which exist. Such symlinks can be useful later.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Setting dockerBinary to the full path of the Docker binary is a good
idea and this is now done in the test code.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This code was introduced with commented out sections. Just delete them.
Original commit: 18fc707fdf
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
This changes the upstart init script to start on `local-filesystems`.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes Docker pull only the image tagged as latest when no tag has
been specified. This makes Docker pull only the image it'll run.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Now that we have the generic graphtest tests that actually tests
the driver we can remove the old mock-using tests. Almost all of
these tests were disabled anyway, and the four remaining ones
didn't really test much while at the same time being really
fragile and making the rest of the code more complex due to
the mocking setup.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
The file was saved as busybox.tar, but the ls commands named it b.tar.
Docker-DCO-1.1-Signed-off-by: Steven Burgess <steven.a.burgess@hotmail.com> (github: stevenburgess)
those that were specified in the config. This commit also explicitly
adds a set of capabilities that we were silently not dropping and were
assumed by the tests.
Docker-DCO-1.1-Signed-off-by: Victor Marmol <vmarmol@google.com> (github: vmarmol)
ideally it should never reach it, but there was already multiple issues with infinite loop
at following symlinks. this fixes hanging unit tests
Docker-DCO-1.1-Signed-off-by: Lajos Papp <lajos.papp@sequenceiq.com> (github: lalyos)
normally symlinks are created as either
ln -s /path/existing /path/new-name
or
cd /path && ln -s ./existing new-name
but one can create it this way
cd /path && ln -s existing new-name
this drives FollowSymlinkInScope into infinite loop
Docker-DCO-1.1-Signed-off-by: Lajos Papp <lajos.papp@sequenceiq.com> (github: lalyos)
This adds a few lines to the RUN Dockerfile docs to explain how to
bypass the RUN caching and how ADD can also invalidate the cache for
these instructions.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
We don't need this because it is covered by the libcontainer MAINTAINERS
file
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This commit lowers the total time spent in ChangesDirs to half during a
commit.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
After copying allowed device nodes, set up "/dev/fd", "/dev/stdin",
"/dev/stdout", and "/dev/stderr" symlinks.
Docker-DCO-1.1-Signed-off-by: Bernerd Schaefer <bj.schaefer@gmail.com> (github: bernerdschaefer)
[rebased by @crosbymichael]
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
When listener channel is closed, it becomes always available for
reading: select becomes an active loop which writes default-constructed
events (i.e: empty strings).
Fixes#5766.
Docker-DCO-1.1-Signed-off-by: Arnaud Porterie <arnaud.porterie@gmail.com> (github: icecrime)
to cover a couple of use-cases:
* 1mb file, using no compression
* 1mb file, using compression
* 1024 1k files, using no compression
* 1024 1k files, using compression
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This commit makes the Docker daemon call UpdateSuffixarray only after
it finishes registering all containers.
This lowers the amount of time required for the Docker daemon to start
up.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This commit refactors TruncIndex to make it possible to add container
ids to the TruncIndex without updating the Suffixarray.
This is useful during the Docker daemon's startup when we don't want to
update the Suffixarray for every container we add.
Add continues to function like before.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This moves the call to sort in daemon/history to a function to be
called explicitly when we're done adding elements to the list.
This speeds up `docker ps`.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Now IP reuses only after all IPs from network was allocated
Fixes#5729
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
This patch is a preventative patch, it fixes possible future
vulnerabilities regarding unsantised paths. Due to several recent
vulnerabilities, wherein the docker daemon could be fooled into
accessing data from the host (rather than a container), this patch
was created to try and mitigate future possible vulnerabilities in
the same vein.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch adds integration tests for the copying of resources
from a container, to ensure that regressions in the security of
resource copying can be easily discovered.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the bug that allowed cp to copy files outside of
the containers rootfs, by passing a relative path (such as
../../../../../../../../etc/shadow). This is fixed by first converting
the path to an absolute path (relative to /) and then appending it
to the container's rootfs before continuing.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
Before we create any files to bind-mount on, make sure they are
inside the container rootfs, handling for instance absolute symbolic
links inside the container.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
All modern distros set up /run to be a tmpfs, see for instance:
https://wiki.debian.org/ReleaseGoals/RunDirectory
Its a very useful place to store pid-files, sockets and other things
that only live at runtime and that should not be stored in the image.
This is also useful when running systemd inside a container, as it
will try to mount /run if not already mounted, which will fail for
non-privileged container.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If you specify a bind mount in a place that doesn't have a file yet we
create that (and parent directories). This is needed because otherwise
you can't use volumes like e.g. /dev/log, as that gets covered by the
/dev tmpfs mounts.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This is a first step towards moving all code related to local
manipulation of images into a cleanly separated subsystem,
accessible via a stable set of commands in the engine API.
`graph.TagStore` now implements `engine.Installer`. For now, it
is installed by `Server.InitServer`, along with all other Server
commands. However this will change in future patches.
`graph.TagStore.Install` registers the following commands:
* `image_set` creates a new image and stores it locally.
* `image_get` returns information about an image stored locally.
* `image_tag` assigns a new name and tag to an existing image.
These commands are a pre-requisite for moving 'push' and 'pull'
out of `Server`.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This patch just revs the Ubuntu release used for builds from 13.10
to 14.04.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
The btrfs driver attempts to stat the /var/lib/docker directory to
ensure it exists. If it doesn't exist then it bails with an unhelpful
log line:
```
2014/05/10 00:51:30 no such file or directory
```
In 0.10 the directory was created but quickly digging through the logs I
can't tell what sort of re-ordering of code caused this regression.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
When sending a new job to a `engine.Sender`, the corresponding
`engine.Receiver` will receive that job with its environment preserved.
Previously the job name, arguments and streams were preserved but the
env was lost.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* `Env.MultiMap` returns the contents of an Env as `map[string][]string`
* `Env.InitMultiMap` initializes the contents of an Env from a `map[string][]string`
This makes it easier to import and export an Env to other formats
(specifically `beam/data` messages)
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This is a convenience for callers which are only interested in one value
per key. Similar to how HTTP headers allow multiple keys per value, but
are often used to store and retrieve only one value.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This introduces a superficial change to the Beam API:
* `beam.SendPipe` is renamed to the more accurate `beam.SendRPipe`
* `beam.SendWPipe` is introduced as a mirror to `SendRPipe`
There is no other change in the beam API.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
URL referred to raw.github.com instead of raw.githubusercontent.com. Fixed.
Docker-DCO-1.1-Signed-off-by: Aaron Huslage <huslage@gmail.com> (github: huslage)
In the documentation was not mentioned explicitly that VOLUME value
shoud be a valid JSON array. Because of this I spent time to discovering
the problem with my image where I put `VOLUME ['/data']` (with single quotes).
The `['/data']` mount point was parsed and mounted whole as a string without
any errors and warnings.
Docker-DCO-1.1-Signed-off-by: Max Shytikov <mshytikov@gmail.com> (github: mshytikov)
For now this means the btrfs backend is skipped when run
inside make test. You can however run it manually if you want.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If a graphdriver fails initialization due to ErrNotSupported we ignore
that and keep trying the next. But if some driver has a different
error (for instance if you specified an unknown option for it) we fail
the daemon startup, printing the error, rather than falling back to an
unexected driver (typically vfs) which may not match what you have run
earlier.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This adds daemon/graphdriver/graphtest/graphtest which has a few
generic tests for all graph drivers, and then uses these
from the btrs, devicemapper and vfs backends.
I've not yet added the aufs backend, because i can't test that here
atm. It should work though.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Currently the tests that mocks or denies functions leave this state
around for the next test. This is no good if we want to actually
test the devicemapper code in later tests.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
MongoDB article had some fundemental issues.
- Outdated Dockerfile
- Insufficient / unclear instructions
- Unnecessary comments
- Failed to explain the role of Docker.io
- Did not have a complete Dockerfile sample
- Lacked a "learn more" section / link to Trusted Builds
This update aims to address all these issues with a complete re-write.
It also:
- Corrects the label under which this article is/was listed on the menu
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
- First run at amending after the initial review process.
- Make the Dockerfile generic.
- Revision.
- Fixes
This renames the goruntime import of the runtime package back to
runtime.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Update restrict.Restrict to both show the error message when failing to mount /dev/null over /proc/kcore, and to ignore "not exists" errors while doing so (for when CONFIG_PROC_KCORE=n in the kernel)
It's fine to list both here because "Should-Start" is a loose binding (ie, if the listed service exists, it'll be started first, but otherwise, this one will start without it).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The tests weren't ... tested when last edited, this patch fixes
them so that they run and pass correctly.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the fact that the tests for pkg/networkfs/etchosts
couldn't build due to syntax errors.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This moves the Attach method from the container to the daemon. This
method mostly supports the http attach logic and does not have anything
to do with the running of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This updates systemd.Apply to match the fs backend by:
* Always join blockio controller (for stats)
* Support CpusetCpus
* Support MemorySwap
Also, it removes the generic UnitProperties in favour of a single
option to set the slice.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Also make sure we copy the joining containers hosts and resolv.conf with
the hostname if we are joining it's network stack.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Updating CONTRIBUTING to include the correct URL for the post-commit hook.
Docker-DCO-1.1-Signed-off-by: Aaron Huslage <huslage@gmail.com> (github: huslage)
- Fix boot2docker url
- move HomeBrew instructions to a separate section
- fix docker client 5-liner to work (its still ugly)
- fix and update program output
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
A command like:
docker run --expose 5353/tcp -P fedora sleep 10
Currently fails with:
Error: Cannot start container 5c558de5f0bd85ff14e13e3691aefbe531346297a27d4b3562732baa8785b34a: unknown protocol
This is because nat.SplitProtoPort() confuses the order of the port and
proto in 5353/tcp, assuming the protocol is first. However, in all other
places in docker the protocol is last, so the fix is just to swap these.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This improvement introduces x-axe scrolling to code-blocks by
overriding certain default bootstrap word-wrapping constraints.
This PR closes: https://github.com/dotcloud/docker/issues/5279
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
If you run the tutorial step-by-step, following error occurs:
```$ sudo docker logs $container_id
Usage: docker logs CONTAINER
Fetch the logs of a container
-f, --follow=false: Follow log output```
This is obviously because bash variables are case-sensitive, so it mustn't be `CONTAINER_ID` above.
Docker-DCO-1.1-Signed-off-by: Mateusz Sulima <sulima.mateusz@email.com> (github: github_handle)
This continues the effort to separate all registry logic from the
deprecated `Server` object.
* 'search' is exposed by `github.com/dotcloud/docker/registry/Service`
* Added proper documentation of Search while I was at it
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This is the first step towards separating the registry subsystem from
the deprecated `Server` object.
* New service `github.com/dotcloud/docker/registry/Service`
* The service is installed by default in `builtins`
* The service only exposes `auth` for now...
* ...Soon to be followed by `pull`, `push` and `search`.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
I've seen one other missing space that I addressed in another PR already.
I don't know whether that is a common occurrence in the docs.
About the second diff chunk, it looks like some copy-paste mistake to me.
Docker-DCO-1.1-Signed-off-by: Felix Rabe <felix@rabe.io> (github: felixrabe)
This allows using `Engine.Register` and `Engine.RegisterCatchall` on the
same engine without the catchall hiding all other handlers.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This is required to address a race condition described in #5553,
where a container can be partially deleted -- for example, the
root filesystem but not the init filesystem -- which makes
it impossible to delete the container without re-adding the
missing filesystems manually.
This behavior has been witnessed when rebooting boxes that
are configured to remove containers on shutdown in parallel
with stopping the Docker daemon.
Docker-DCO-1.1-Signed-off-by: Gabriel Monroy <gabriel@opdemand.com> (github: gabrtv)
We don't have the flexibility to do extra things with lxc because it is
a black box and most fo the magic happens before we get a chance to
interact with it in dockerinit.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
There is not need for the remount hack, we use aa_change_onexec so the
apparmor profile is not applied until we exec the users app.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
- git mv archived/* .
- put the links back into the summary document
- reduce the header depth by 1 so the TOC lists each API version
- update the mkdocs.yaml to render the archived API docs, but not add
them to the menu/nav
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
This also cleans up some of the left over restriction paths code from
before.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
It has been pointed out that some files in /proc and /sys can be used
to break out of containers. However, if those filesystems are mounted
read-only, most of the known exploits are mitigated, since they rely
on writing some file in those filesystems.
This does not replace security modules (like SELinux or AppArmor), it
is just another layer of security. Likewise, it doesn't mean that the
other mitigations (shadowing parts of /proc or /sys with bind mounts)
are useless. Those measures are still useful. As such, the shadowing
of /proc/kcore is still enabled with both LXC and native drivers.
Special care has to be taken with /proc/1/attr, which still needs to
be mounted read-write in order to enable the AppArmor profile. It is
bind-mounted from a private read-write mount of procfs.
All that enforcement is done in dockerinit. The code doing the real
work is in libcontainer. The init function for the LXC driver calls
the function from libcontainer to avoid code duplication.
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
This is needed for Send/Recieve to correctly handle borders between
the messages.
The framing uses a single 32bit uint32 length for each frame, of which
the high bit is used to indicate whether the message contains a file
descriptor or not. This is enough to separate out each message sent
and to decide to which message each file descriptors belongs, even
though multiple Sends may be coalesced into a single read, and/or one
Send can be split into multiple writes.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This PR aims to increase the consistency across the docs for
code blocks and code/comment/output markings.
Rule followed here is "what's visible on the screen should be reflected"
Issue:
- Docs had various code blocks showing: comments, commands & outputs.
- All three of these items were inconsistently marked.
Some examples as to how this PR aims to introduce improvements:
1. Removed `> ` from in front of the "outputs". Eg,
` > REPOSITORY TAG ID CREATED` replaced with:
` REPOSITORY TAG ID CREATED`.
2. Introduced `$` for commands. Eg,
` sudo chkconfig docker on` replaced with:
` $ sudo chkconfig docker on`
3. Comments:
` > # ` replaced with:
` # `.
> Please note:
> Due to a vast amount of items reviewed and changed for this PR, there
> might be some individually incorrect replacements OR patterns of incorrect
> replacements. This PR needs to be reviewed and if there is anything missing,
> it should be improved or amended.
Closes:
https://github.com/dotcloud/docker/issues/5286
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
No need to duplicate this information when we already have a
container.json file in the root of libcontainer
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This duplicates some of the Exec code but I think it it worth it because
the native driver is more straight forward and does not have the
complexity have handling the type issues for now.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Last time I discussed this with @tianon, the AUTHORS was being
regenerated regularly, so we could remove this step.
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
This temp. expands the Exec method's signature but adds a more robust
way to know when the container's process is actually released and begins
to run. The network interfaces are not guaranteed to be up yet but this
provides a more accurate view with a single callback at this time.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
In the spirit of getting more contributors to maintain their
components.. I nominate @jpetazzo ot maintain dind (he's the original
author).
@jpetazzo I don't expect this to be too much load, but it's a good and
symbolic start :)
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
A WIP pull request or issue for discussion would be a better avenue for collaboration and discussion of a ZFS backend.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This commit makes Docker throw an error if the daemon isn't started as
root.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
These are failing, and indicate things that need to be fixed. The
primarily problem is the lack of framing between beam messages.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
[solomon@docker.com: rebased on master]
Signed-off-by: Solomon Hykes <solomon@docker.com>
Without this patch, containers inherit the open file descriptors of the daemon, so my "exec 42>&2" allows us to "echo >&42 some nasty error with some bad advice" directly into the daemon log. :)
Also, "hack/dind" was already doing this due to issues caused by the inheritance, so I'm removing that hack too since this patch obsoletes it by generalizing it for all containers.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Occasionally the selinux_test program will fail because we are setting file
context based on the Process ID but not the TID. THis change will always
use the TID to set SELinux labels.
Docker-DCO-1.1-Signed-off-by: Daniel Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
Added --selinux-enable switch to daemon to enable SELinux labeling.
The daemon will now generate a new unique random SELinux label when a
container starts, and remove it when the container is removed. The MCS
labels will be stored in the daemon memory. The labels of containers will
be stored in the container.json file.
When the daemon restarts on boot or if done by an admin, it will read all containers json files and reserve the MCS labels.
A potential problem would be conflicts if you setup thousands of containers,
current scheme would handle ~500,000 containers.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
This has every container using the docker daemon's pid for the processes
label so it does not work correctly.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Creating the "docker save" tarball for "scratch" is pretty simple. I've also extrapolated the "docker build -t busybox ." logic into a separate "hack/make/.ensure-busybox" file so that it can eventually be reused easier.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
It was a nice idea to recruit more maintainers but we never found the
time to do it properly...
I am still interested in any ideas to make it easier to start
contributing!
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
I tested to verify that if neither package is available (for example, on Debian Wheezy), apt still continues installing properly.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
These are unnecessary since the user package handles these cases properly already (as evidenced by the LXC backend not having these special cases).
I also updated the errors returned to match the other libcontainer error messages in this same file.
Also, switching from Setresuid to Setuid directly isn't a problem, because the "setuid" system call will automatically do that if our own effective UID is root currently: (from `man 2 setuid`)
setuid() sets the effective user ID of the calling process. If the
effective UID of the caller is root, the real UID and saved set-user-
ID are also set.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This adds back in the references to private repositories and
provides some refactoring to the Working with repositories
documentation including updating references to the "Central"
registry to Docker.io.
It also:
* Fixes some links and references to Central Index
* Fixes anchors in other files to updated titles in Working with Repositories.
* Renamed Central Index in the remaining places.
* Updated terms documentation to reflect Docker.io
* Updated some Docker Index naming to be consistent.
* Updates menu labels and hyperlinks.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Correct documentation for POST /commit to reflect that the container's
configuration is supplied in the request body, and not as a query
parameter.
Also correct a small typo in the example JSON for create container.
Docker-DCO-1.1-Signed-off-by: Andy Goldstein <agoldste@redhat.com> (github: ncdc)
Docs' BG was original "#fff" and blocks such as code blocks or
warning-notes blocks were coloured in #F2F2F2.
In order to make it easier to read everything, the BG colour was
changed to #fff. However, the switch missed to convert other blocks'
BG colour.
This commit aims to re-introduce the correct contrast by changing the
BG colour of warning/notes block to #fff.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This commit aims to improve the rendering of code blocks by
reducing the padding, matching the font-size with the rest of the
documentation text and finally, by changing the background colour
back to white from its current gray-ish state which matches the
background colour and making it really hard to spot the code.
Note: The BG colouring issue is due to converting the main BG
to gray whilst missing to change parts that where gray to white, i.e.,
not making the complete switch.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
So far it has been mostly my duty to create and maintain docs' design/theme.
This commit adds myself to the list of maintainers by modifying
the MAINTAINERS file under the docs/theme directory.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This commit removes the "max-width" property of DOM "containers";
Thus letting the viewport to expand to fill the available space.
This commit aims to bring pleasure to Docker docs' readers' eyes,
And to make them happy by letting them profit more from their large
monitors. (or use more efficiently their smaller ones).
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Removed a now unused endpoint from the accounts API.
Updated some of the accounts links to point to www.docker.io
as the account signup and resend-email-confirmation links should
no longer point to the index.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Installer is a standard interface for objects which can "install"
themselves an engine by registering handlers.
This can be used as an entrypoint for external plugins etc.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This allows multiple instances of the backend in different containers
to access devices (although generally only one can modify/create them).
Any old metadata is converted on the first run.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Instead of globally keeping track of the free device ids we just
start from 0 each run and handle EEXIST error and try the next one.
This way we don't need any global state for the device ids, which
means we can read device metadata lazily. This is important for
multi-process use of the backend.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This moves the EBUSY detection to devmapper.go, and then returns
a real ErrBusy that deviceset uses.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This will allow for these to be set independently. Keep the current Docker behavior where Memory and MemoryReservation are set to the value of Memory.
Docker-DCO-1.1-Signed-off-by: Victor Marmol <vmarmol@google.com> (github: vmarmol)
relative paths, and also fixed some broken images.
There are still more todo - next PR I think :)
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
- Remove redundant chars and all errors caused by RST->MD conversion.
e.g. [/#, /\, \<, />, etc.]
- Fix broken inter-document links
- Fix outbound links no-longer active or changed
- Fix lists
- Fix code blocks
- Correct apostrophes
- Replace redundant inline note marks for code with code marks
- Fix broken image links
- Remove non-functional title links
- Correct broken cross-docs links
- Improve readability
Note: This PR does not try to fix/amend:
- Grammatical errors
- Lexical errors
- Linguistic-logic errors etc.
It just aims to fix main structural or conversion errors to serve as
a base for further amendments that will cover others including but
not limited to those mentioned above.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Update:
- Fix backtick issues
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
- Mention that [] options may be specified multiple times on the Usage page
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: mikemaccana)
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: SvenDowideit)
This allows the job's status code to be consumed externally so that we
can use it as an exit code or saving to a state file.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Without creating a root there is no way for the engine to return an
error from the new function.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
container.Kill() might read a pid of 0 from
container.State.Pid due to losing a race with
container.monitor() calling
container.State.SetStopped(). Sending a SIGKILL to
pid 0 is undesirable as "If pid equals 0, then sig
is sent to every process in the process group of
the calling process."
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
We used to mount in Create() to be able to create a few files that
needs to be in each device. However, this mount is problematic for
selinux, as we need to set the mount label at mount-time, and it
is not known at the time of Create().
This change just moves the file creation to first Get() call and
drops the mount from Create(). Additionally, this lets us remove
some complexities we had to avoid an extra unmount+mount cycle.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
use the beta-warning area to tell the user what VERSION of docker, git
branch, and links to the official release version docs are.
requires / extends PR #5272
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
This makes the engine more general purpose so that we can
use it and the job routing functionality for reexec'ing our binary
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Conflicts:
integration/runtime_test.go
Installer is a standard interface for objects which can "install"
themselves an engine by registering handlers.
This can be used as an entrypoint for external plugins etc.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Instead of calling syscall.Close() on the fds in sendUnix() we call
Close() on the *os.File in Send(). Otherwise the fd will be closed, but
the *os.File will continue to live, and when it is finalized the
fd will be closed (which by then may be reused and can be anything).
This also adds a note to Send() the the file is closed.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Commands in the pipeline should either implement or pass-through command messages.
This amounts to a proof-of-concept implementation of the "pipeline"
design of Docker plugins.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Grab forklock to make sure no forks accidentally inherit the new fds
before they are made CLOEXEC There is a slight race condition between
ReadMsgUnix returns and when we grap the lock, so this is not
perfect. Unfortunately There is no way to pass MSG_CMSG_CLOEXEC to
recvmsg() nor any way to implement non-blocking i/o in go, so this is
hard to fix.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This avoids false alarms when process exits without printing. Devnull
doesn't require synchronization.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
In the pipeline design, several beam commands can be run concurrently,
with their respective inputs and outputs connected in such a way that
beam messages flow from the first to last. This is similar to the way
a unix shell executes commands in a pipeline: instead of STDIN and
STDOUT, each beam command has a "BEAMIN" and "BEAMOUT".
Since beam allows for richer communication than plain byte streams, beam
pipelines can express more powerful computation, while retaining the
fundamental elegance and ease of use of unix-style composition.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This inserts low-level hooks for interactive step-by-step debugging.
Hooks are triggered by setting the *TEST* environment variable.
This is particularly useful for tracking down file descriptor leaks,
double-closing, or other issues which are difficult to debug with
the usual toolbox.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
The "wiring" is broken because engine does not keep a reference for handling introspection calls.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Automatically switch to interactive mode when stdin is a terminal
* Basic implementation of "responses"
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Close all file descriptors successfully sent as attachment
* Close duplicate file descriptors created by net.FileCon and net.UnixConn.File
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
These convenience functions expose a familiar face to the unknown and bizarre world of beam networking.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This patch includes a stripped down implementation with a bare minimum
unix socket transport. It relies on fd passing for stream multiplexing.
The purpose of this first patch is to allow implementation of dynamic
linking, which will allow advanced service discovery.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
container.Register() checks both IsRunning() and IsGhost(), but at
this point IsGhost() is always true if IsRunning() is true. For a
newly created container both are false, and for a restored-from-disk
container Daemon.load() sets Ghost to true if IsRunning is true. So we
just drop the IsGhost check.
This was the last call to IsGhost, so we remove It and all other
traces of the ghost state.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
* Remove out of date "vacation mode"
* Fix my email address
* Remove infrastructure maintainers to reflect reality (core maintainers
are currently maintaining their own infrastructure).
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Add notice in server/server.go explaining not to add stuff there, and
what to do instead.
* Make myself a sole maintainer of server/ to avoid concurrent edits
while refactoring.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: contrib/man/md/README.md
modified: contrib/man/md/docker-build.md
modified: contrib/man/md/docker-cp.md
modified: contrib/man/md/docker-logs.md
modified: contrib/man/md/docker-push.md
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: contrib/man/md/docker-build.md
modified: contrib/man/md/docker-commit.md
This also removes all the old man pages, .gitignores their directory, and updates the md2man-all.sh script to be easier to read and more friendly to being called within hack/make/ubuntu.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
All Docker commands have a Markdown page.
Dockerfile used to build a Fedora based pandoc container.
md2man-all.sh is used inside the container.
README.sh includes an explaination on how to build the fedora/pandoc
image and how to run the container directly.
Changes to be committed:
new file: contrib/man/md/Dockerfile
new file: contrib/man/md/README.md
new file: contrib/man/md/docker-attach.md
new file: contrib/man/md/docker-build.md
new file: contrib/man/md/docker-commit.md
new file: contrib/man/md/docker-cp.md
new file: contrib/man/md/docker-diff.md
new file: contrib/man/md/docker-events.md
new file: contrib/man/md/docker-export.md
new file: contrib/man/md/docker-history.md
new file: contrib/man/md/docker-images.md
new file: contrib/man/md/docker-import.md
new file: contrib/man/md/docker-info.md
new file: contrib/man/md/docker-inspect.md
new file: contrib/man/md/docker-kill.md
new file: contrib/man/md/docker-load.md
new file: contrib/man/md/docker-login.md
new file: contrib/man/md/docker-logs.md
new file: contrib/man/md/docker-port.md
new file: contrib/man/md/docker-ps.md
new file: contrib/man/md/docker-pull.md
new file: contrib/man/md/docker-push.md
new file: contrib/man/md/docker-restart.md
new file: contrib/man/md/docker-rm.md
new file: contrib/man/md/docker-rmi.md
new file: contrib/man/md/docker-run.md
new file: contrib/man/md/docker-save.md
new file: contrib/man/md/docker-search.md
new file: contrib/man/md/docker-start.md
new file: contrib/man/md/docker-stop.md
new file: contrib/man/md/docker-tag.md
new file: contrib/man/md/docker-top.md
new file: contrib/man/md/docker-wait.md
new file: contrib/man/md/docker.md
new file: contrib/man/md/md2man-all.sh
This one is a problem because the most useful stat is a string and not a
float like verything else. We may have to change the return type
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Lists with paragraphs as items need blank lines in between
items to generate correct layout.
Docker-DCO-1.1-Signed-off-by: Lance Chen <cyen0312@gmail.com> (github: Lance0312)
Elaborate on the volumes example to prevent confusion.
Update: Amend the example so it is executable by the reader.
This includes fixing the erring "/var/logs" statement with "/var/log".
Update: Fix sentence structuring to better suit the 80chrs. limit.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This was supposed to be part of my previous PR, but somehow got missed.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The current load script does alot of things. If it does not find the
parser loaded on the system it will just exit 0 and not load the
profile. We think it should fail loudly if it cannot load the profile
and apparmor is enabled on the system.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Don't make calls to the registry if the image exists already.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
fs_test.go doesn't finish if Docker's code is placed under a directory
which has symlinks between / and the directory.
For example, the below doesn't finish before the change.
/home -> usr/home
FollowSymlinkInScope("/home/bob/foo/bar", "/home/bob/foo")
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
Fixes#5166
Current graph.restore is essentially O(n^2 log n) due to how
suffixarray creation works.
Rather than create/append/create new this supports creation from a seed
array of ids.
Functional testing shows this eliminates the hang on Creating image
graph reported on list.
Docker-DCO-1.1-Signed-off-by: Paul Nasrat <pnasrat@gmail.com> (github: pnasrat)
change: A fully qualified image name must include a tag.
Recommitting changes for PR: https://github.com/dotcloud/docker/pull/5145
since SvenDowideit suggested I would need to sign my commit for it to be accepted.
Docker-DCO-1.1-Signed-off-by: Justin Simonelis <justin.p.simonelis@gmail.com> (github: jsimonelis)
If the bridge specified using -b/--bridge doesn't
exist, fail instead of attempting to create it.
This is consistent with the docker documentation
on -b/--bridge: "Attach containers to a pre
existing network bridge".
It is also less surprising in an environment where
the operator expected the bridge to be properly
set up before docker starts and expects docker to
fail fast if the bridge was not up instead of
masking this error and coming up in some
potentially broken state.
With this patch, docker still creates docker0 if
needed and no bridge was explicitly specified.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
libcontainer.GetNamespace returns nil on FreeBSD because
libcontainer.namespaceList is empty. In this case, Namespaces#Get should
return nil instead of being panic.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
This commit changes the way docker build cleans up containers.
Containers get cleaned up right away after they've been committed and
they've become an image.
When the build fails, only the last container of the failing step is
left behind.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Explain how to install boot2docker and docker by using homebrew.
Docker-DCO-1.1-Signed-off-by: Jonathan Pares <jonathanpa@users.noreply.github.com> (github: jonathanpa)
Implement system.LUtimesNano and system.UtimesNano. The latter might be
removed in future because it's basically same as os.Chtimes. That's why
the test is mainly focusing LUtimesNano.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
"set -e" is already inherited here from make.sh, but explicit is always better than implicit (hence the "set -e" in the first place!)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
symlink /proc/mounts /var/lib/docker/btrfs/subvolumes/1763d6602b8b871f0a79754f1cb0a31b3928bb95de5232b1b8c15c60fa1017f6-init/etc/mtab: no such file or directory
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
It seems that netlink in older kernels, including RHEL6, does not
support RTM_SETLINK with IFLA_MASTER. It just silently ignores it, reporting
no error, causing netlink.NetworkSetMaster() to not do anything yet
return no error.
We fix this by introducing and using AddToBridge() in a very similar manner
to CreateBridge(), which use the old ioctls directly.
This fixes https://github.com/dotcloud/docker/issues/4668
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This also migrates the volumes from integration tests into the new cli
integration test framework.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
We do not allow ghosts anymore and this test does not add any value
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Warn users of the planned deprecation of 'docker commit --run', and hide
it from the docs and usage message. The option continues to work.
Note that an alternative to 'commit --run' is being implemented but is
not yet available. We are printing the warning anyway because on
the basis that it never hurts to give more advance warning.
The 'commit --run' flag is a leftover from the very early days of Docker,
and has several problems:
1) It is very user unfriendly. You have to pass a literal json dict
which is poorly documented and changes regularly (see PortSpecs vs
ExposedPorts). The merge behavior is not clear and also changes
regularly. it's not possible to unset a value.
2) It overlaps with the Dockerfile syntax. There are 2 ways to set
a default command, expose a port or change an env variable. Some
things can be done in a Dockerfile but not in --run. Some things
can be done in --run but not in a Dockerfile. It would be better
to push a single syntax, allow using it both in a file and via
the command line, and make improvements in a single place.
3) It exposes data structures which should not be publicly exposed.
There are several planned improvements to Docker which require moving
around the content and schema of the various Config, Image and Container
structures. The less of those we expose in public interfaces, the easier
it is to move things around without a reverse compatibility nightmare.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
currently the files created are not readable. This makes the files and
directories permissions more sane.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Previously, running just "hack/release.sh" only ran the unit tests. This updates that to run the unit tests, then the integration tests, then build the binaries, then run the cli integration tests (so we're literally testing the binary we're about to release, which is super freaking cool IMO <3).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Some flags ended with a colon, some didn't. For man pages, the prevailing normal practice is not to end the flags lines with colons.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
`filepath.Abs` does more than just `filepath.IsAbs` - namely, `filepath.Clean`, which resolves things like `.../.` or `.../../...`, and causes even an absolute path like `/some/path/../absolute` to fail (or, in my case, `/path/to/docker/.`)
Just using `filepath.IsAbs` directly is a much cheaper check, too. :)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The local resolver warning needed to be moved at daemon start because it
was only show for the first container started anyways before having a
default value set.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
new file: contrib/man/man1/docker-attach.1
new file: contrib/man/man1/docker-build.1
new file: contrib/man/man1/docker-images.1
new file: contrib/man/man1/docker-info.1
new file: contrib/man/man1/docker-inspect.1
new file: contrib/man/man1/docker-rm.1
new file: contrib/man/man1/docker-rmi.1
new file: contrib/man/man1/docker-run.1
new file: contrib/man/man1/docker-tag.1
new file: contrib/man/man1/docker.1
This also includes some portability changes so that the package can be
imported with the top level runtime.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
* The default behavior is preserved
* This disables the use of the `TEST` environment variable in engine.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
The install script (on https://get.docker.io/) installs an APT sources.list
entry referencing an HTTPS repository, and takes care of installing the
apt-transport-https package. However, the Debian/Ubuntu specific installation
script (on https://get.docker.io/ubuntu) used an HTTPS repository but without
installing that package, causing the installation to fail on some platforms.
This will use HTTPS everywhere, and updates the documentation accordingly.
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
The variables that were defined at the top of the apparmor profile are best
pulled in via the <tunables/global> include.
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
Add 'pid' variable pointing to 'self' to allow parsing of profile to succeed
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
Encountered problems on 14.04 relating to signals between container
processes being blocked by apparmor. The base abstraction contains
appropriate rules to allow this communication.
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
LUtimesNano and all other functions were implemented on pkg/system after
d6114c0da0.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
The wait at the end of cli integration script could end up failing if
the process had already exited. This was making it look like the tests
have failed.
This change fixes the problem.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes it possible to choose the graphdriver and the execdriver
which is going to be used for the cli integration tests.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes container and image removal in the tests run synchronously.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
'docker insert' is an old command which predates 'docker build'. We no
longer recommend using it, it is not actively maintained, and can be
replaced with the combination of 'docker build' and 'ADD'.
This removes the command from usage and documentation, and prints a
warning when it is called.
The command still works but it will be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* The commands are no longer listed or documented.
* The commands still work but print a deprecation warning.
* The commands should be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Such nodes could already be created by importing a tarball to a container; now
they can be created from within the container itself.
This gives non-privileged containers the mknod kernel capability, and modifies
their cgroup settings to allow creation of *any* node, not just whitelisted
ones. Use of such nodes is still controlled by the existing cgroup whitelist.
Docker-DCO-1.1-Signed-off-by: Kevin Wallace <kevin@pentabarf.net> (github: kevinwallace)
As explained in https://github.com/dotcloud/docker/issues/4979
--volumes-from fails with ENOFILE errors.
This is because the code tries to look at the "from" volume without
ensuring that it is mounted yet. We fix this by mounting the containers
before stating in it.
Also includes a regression test.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
For combing through logs, have an intro line with information about the
running instance of the docker daemon.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This also improves the logic around formatting the labels for selinux
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
There is a bug in the SELinux patch for the lxc execdriver, that
causes lxc containers to blow up whether or not SELinux is enabled.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
When the code attempts to set the ProcessLabel, it checks if SELinux Is
enabled. We have seen a case with some of our patches where the code
is fooled by the container to think that SELinux is not enabled. Calling
label.Init before setting up the rest of the container, tells the library that
SELinux is enabled and everything works fine.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
If a system is configured for SELinux but does not know about docker or
containers, then we want the transitions of the policy to work. Hard coding
the labels causes docker to break on older Fedora and RHEL systems
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This adds a bit of documentation for the `-a` flag for docker run.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
We currently drop the global lock while holding a per-device lock when
waiting for device removal, and then we re-aquire it when the sleep is done.
This is causing a AB-BA deadlock if anyone at the same time tries to do any
operation on that device like this:
thread A: thread B
grabs global lock
grabs device lock
releases global lock
sleeps
grabs global lock
blocks on device lock
wakes up
blocks on global lock
To trigger this you can for instance do:
ID=`docker run -d fedora sleep 5`
cd /var/lib/docker/devicemapper/mnt/$ID
docker wait $ID
docker rm $ID &
docker rm $ID
The unmount will fail due to the mount being busy thus causing the
timeout and the second rm will then trigger the deadlock.
We fix this by adding a lock ordering such that the device locks
are always grabbed before the global lock. This is safe since the
device lookups now have a separate lock.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Currently access to the Devices map is serialized by the main
DeviceSet lock, but we need to access it outside that lock, so we
add a separate lock for this and grab that everywhere we modify
or read the map.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This centralizes the lookup of devices so it is only done in one place.
This will be needed later when we change the locking for it.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We already have the info in most cases, no need to look this up multiple times.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
All the callers already have the info, no need for an extra lookup.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
There is no need to look this up again, we have it already in all callers.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Especially but not limited to:
- make BINDDIR= ... - for when you don't want a bind mount at all
- make DOCSPORT=9000 docs - for when you want a not-8000 docs port
- when we can't determine a branch name, we don't try to "docker build -t docker: ." anymore - we just "docker build -t docker ." (thus allowing Docker to assume ":latest")
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
When the code attempts to set the ProcessLabel, it checks if SELinux Is
enabled. We have seen a case with some of our patches where the code
is fooled by the container to think that SELinux is not enabled. Calling
label.Init before setting up the rest of the container, tells the library that
SELinux is enabled and everything works fine.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
If a system is configured for SELinux but does not know about docker or
containers, then we want the transitions of the policy to work. Hard coding
the labels causes docker to break on older Fedora and RHEL systems
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This way, we can use both `docker kill -s INT some_container` and `docker kill -s SIGINT some_container` and both will do nice things for us. :)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Docker.io API has replaced the gravatar_email field with a
gravatar_url field instead.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Make sure the busybox image is ready to be used when running the cli
integration tests.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
so it's before "Mirrors" instead of "Docker and local DNS server
warnings"
Docker-DCO-1.1-Signed-off-by: Marc Abramowitz <msabramo@gmail.com> (github: msabramo)
trim the front of variables. Error if there are other spaces present.
Leave the value alone.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
match dock functionality, and not try to achieve shell-sourcing compatibility
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Added Adele Goldstine, Erna Schneider Hoover, Grace Hopper, Jean Bartik,
Jean E. Sammet, Karen Spärck Jones, Radia Perlman and Sophie Wilson.
Thanks to @jamtur01 for Sophie Kowalevski, Hypatia, Jane Goodall, Maria
Mayer, Rosalind Franklin, Gertrude Elion, Elizabeth Blackwell,
Marie-Jeanne de Lalande, Maria Kirch, Maria Ardinghelli, Jane Colden,
June Almeida, Mary Leakey, Lise Meitner, Johanna Mestorf.
Thanks to @xamebax for Françoise Barré-Sinoussi, Rachel Carson, Barbara
McClintock, Ada Yonath.
Docker-DCO-1.1-Signed-off-by: Johannes 'fish' Ziemke <github@freigeist.org> (github: discordianfish)
Fixes#4741
Right now volumes from expected a dir and not a file so when the drivers
tried to do the bind mount, the destination was a dir, not a file so it
fails to run.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Please do with this as you please (including rebasing and/or squashing it), especially under clause (c) of the DCO.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The change in commit a9fa1a13c3
made us only deactivate devices that were mounted. Unfortunately
this made us not deactivate the base device. Which caused
us to not be able to deactivate the pool.
This fixes that by always just deactivating the base device.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If an admin mounts all file systems as -rshared (Default on RHEL and Fedora)
we see a scaling problem as the number of container increase.
Basically every new container needs to have it new mounts in /var/lib/docker
shared to all other containers, this ends up with us only able to scale to
around 100 containers, before the system slows down.
By simply bind mounting /var/lib/docker on its and then setting it private,
the scaling issue goes away.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This implements cgroup.Apply() using the systemd apis.
We create a transient unit called "docker-$id.scope" that contains
the container processes. We also have a way to set unit specific
properties, currently only defining the Slice to put the
scope in.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This is a conversion of sd_booted() from libsystemd to go and checks
if the system was booted with systemd.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We need this to do systemd API calls.
We also add the static_build tag to make godbus not use
os/user which is problematic for static builds.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
cgroups.procs moves all the threads of the process, and "tasks" just
the one thread. I believe there is a risk that we move the main thread,
but then we accidentally fork off one of the other threads if the go
scheduler randomly switched to another thread. So, it seems safer (and
more correct) to use cgroups.procs.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This leaves only the generic cgroup helper functions in cgroups.go and
will allow easy implementations of other cgroup managers.
This also wires up the call to Cleanup the cgroup which was missing
before.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
In order to handle special configuration for different drivers we
make the Config field a map to string array. This lets
us use it for lxc, by using the "lxc" key for those, and we can
later extend it easily for other backend-specific options.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This fixes the following, which I've been seeing on all my machines for as long as I can remember:
--- FAIL: TestOnlyLoopbackExistsWhenUsingDisableNetworkOption (0.36 seconds)
container_test.go:1597: Wrong interface count in test container: expected [*: lo], got [1: lo 2: sit0]
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
docker will run the process(es) within the container with an SELinux label and will label
all of the content within the container with mount label. Any temporary file systems
created within the container need to be mounted with the same mount label.
The user can override the process label by specifying
-Z With a string of space separated options.
-Z "user=unconfined_u role=unconfined_r type=unconfined_t level=s0"
Would cause the process label to run with unconfined_u:unconfined_r:unconfined_t:s0"
By default the processes will run execute within the container as svirt_lxc_net_t.
All of the content in the container as svirt_sandbox_file_t.
The process mcs level is based of the PID of the docker process that is creating the container.
If you run the container in --priv mode, the labeling will be disabled.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
We need to change it to read only at the very end so that bound,
copy dev nodes and other ops do not fail.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
When s.FinishedAt is zero, the since time exit in docker ps doesn't display correct time.
For example
```
Exited (0) 292.471209 years ago
```
This patch fixes the since time exit to display nothing if s.FinishedAt is zero.
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
This also adds an enabled field to the types so that they
can be easily toggled.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Right now shutdown is looping over *all* devicemapper
devices and actively deactivating them, this is pretty
slow if you have a lot of non-active containers. We
instead only deactivate the devices that are mounted.
We also do the shutdown unmount using MNT_DETACH which
forces the unmount in the global namespace, even if it
is busy because of some container having it mounted.
This means the device will be freed when that container
exits.
Also, we move the call to waitClose to deactivateDevice
because all callers of any of them call both anyway.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
TestCreateStartRestartStopStartKillRm was failing because stop has been
changed to not kill containers.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
when pushing or saving layers, report sizes for validation. And ensure
that the files written are sync'ed.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
In #4740, the apt-key call in docs is changed to use the keyserver port 80 instead of
port 11371, as the previous call would fail with a restrictive firewall or proxy.
This commit extends the change to all apt-key calls in the repository.
Docker-DCO-1.1-Signed-off-by: Viktor Vojnovski <vojnovski@gmail.com> (github: vojnovski)
Fixes#4021
Moved to debian because the redis installed in ubuntu is really old
and does not support args via the cli.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Also renames --since-id/--before-id to --since/--before and add errors
on non-existent containers.
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
Default to the same build behavior, but allow a go build tag to disable
building of the btrfs graphdriver
go build -tags no_btrfs' ...
$ go build
$ objdump -S docker | grep btrfs | wc -l
194
$ go build -tags no_btrfs
$ objdump -S docker | grep btrfs | wc -l
1
# that is a comment ;-)
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Enable build tags for all the graphdrivers to be excludable.
As an example:
```
$ go build
$ ls -l docker
-rwxr-xr-x 1 vbatts vbatts 18400158 Mar 14 14:22 docker*
$ go build -tags "exclude_graphdriver_aufs exclude_graphdriver_vfs exclude_graphdriver_devicemapper"
$ ls -l docker
-rwxr-xr-x 1 vbatts vbatts 17467068 Mar 14 14:22 docker*
```
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Add a failing test case for an issue where docker is not creating a loopback device if networking is dissabled.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
Someone probably got really used to typing er on the end of contain :)
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
The Capabilities field on libcontainer is actually used as a mask.
Rename the field so that this is more clear.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
Include instructions to install Docker from Amazon's Software Repository on new AMI 2014.03 (Release Candidate)
Docker-DCO-1.1-Signed-off-by: Sebastien Stormacq <sebastien.stormacq@gmail.com> (github: sebsto)
Since we're not not mounting anything but the base filesystem outside
the container we no longer need the separate bind mount at
/var/lib/docker/container/$id/root in order to see the base filesystem
without extra mounts. So, we drop this and mount (again) the container
root directly at the real basefs mountpoint.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This moves the bind mounts like /.dockerinit, /etc/hostname, volumes,
etc into the container namespace, by setting them up using lxc.
This is useful to avoid littering the global namespace with a lot of
mounts that are internal to each container and are not generally
needed on the outside. In particular, it seems that having a lot of
mounts is problematic wrt scaling to a lot of containers on systems
where the root filesystem is mounted --rshared.
Note that the "private" option is only supported by the native driver, as
lxc doesn't support setting this. This is not a huge problem, but it does
mean that some mounts are unnecessarily shared inside the container if you're
using the lxc driver.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
These were found using `git grep -nE '[^-a-zA-Z0-9<>]-[a-zA-Z0-9]{2}'` (fair warning: _many_ false positives there).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This commit updates the Apache license boilerplate with actual information. The Apache license appendix (designed to be removed before publication) states:
```
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!)...
```
Additionally, the copyright year was not included. Copyright notices must reflect the current year. This commit updates the listed year to 2014.
see: http://www.copyright.gov/circs/circ01.pdf for more info
Docker-DCO-1.1-Signed-off-by: Phillip Alexander <git@phillipalexander.io> (github: phillipalexander)
commit baa70e9751 duplicates
the description of --mtu.
This patch removes the duplicated description.
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
This makes `--cidfile` clean up empty container ID files. These are
left behind when creating the container fails.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes Docker retry to retrieve the JSON metadata for the layers.
Docker will make 5 attempts to retrieve the metadata before failing and
it will increase the delay between attempts after each failed attempt.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Fix docs and help messages of --iptables and --ip-forward to describe the true case behaviour
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
roll version and standalone information into the _ping. And to support
Headers they are checked after the JSON is loaded (if there is anything
to load). To stay backwards compatible, if the _ping contents are not
able to unmarshal to RegistryInfo, do not stop, but continue with the
same behavior.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This can't be in execdriver (dependency loop) but should not be
hardcoded inside runtime.go either. So we put it in a subpackage.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
For a pull-only, static registry, there only a couple of headers that
need to be optional (that are presently required.
* X-Docker-Registry-Version
* X-Docker-Size
* X-Docker-Endpoints
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Since docker uses cookiejar it doesn't need to manage cookies manually
anymore.
Managing cookie was duplicating it.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
This makes mkimage-debootstrap upgrade packages after retrieving
updated lists of packages.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
```
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
```
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
We've seen some cases in the wild where waiting for unmount/deactivate
of devmapper devices taking a long time (several seconds). So, we increase
the sleeps to 10 seconds before we timeout. For instance:
https://github.com/dotcloud/docker/issues/4389
But, in order to not keep other processes blocked we unlock the global
dm lock while waiting to allow other devices to continue working.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We currently use a global lock to protect global data (like the
Devices map) as well as device data itself and access to
(non-threadsafe) libdevmapper.
This commit also adds a per-device lock, which will allow per-device
operations to temporarily release the global lock while e.g. waiting.
The per-device lock will make sure that nothing else accesses that
device while we're operating on it.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We've seen situations where removal of "ID-init" failed during
container deletion (EBUSY), after removal of "ID" has succeeded. This
caused the container delete operation to fail, and on the next delete
attempt the removal of "ID" failed immediately with "does not exist".
Ideally we should not fail the ID-init removal, but its also non-ideal
to allow a state where the container is half-removed and we cannot
make progress deleting the container. So, we silently ignore not-exist
errors on device removal.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Hairpin NAT is currently done by passing through the docker server. If
two containers on the same box try to access each other through exposed
ports and using the host IP the current iptables rules will not match the
DNAT and thus the traffic goes to 'docker -d'
This change drops the restriction that DNAT traffic must not originate
from docker0. It should be safe to drop this restriction because the
DOCKER chain is already gated by jumps that check for the destination
address to be a local address.
Docker-DCO-1.1-Signed-off-by: Darren Shepherd <darren.s.shepherd@gmail.com> (github: ibuildthecloud)
# sometimes we have upstream master already as origin/master (PRs), but other times we don't, so let's just make sure we have a completely unambiguous way to specify "upstream master" from here out
# but if it's a PR against non-master, we need that upstream branch instead :)
* 40+ various improvements to stability, performance and usability
* New `COPY` Dockerfile instruction to allow copying a local file from the context into the container without ever extracting if the file is a tar file
* Inherit file permissions from the host on `ADD`
* New `pause` and `unpause` commands to allow pausing and unpausing of containers using cgroup freezer
* The `images` command has a `-f`/`--filter` option to filter the list of images
* Add `--force-rm` to clean up after a failed build
* Standardize JSON keys in Remote API to CamelCase
* Pull from a docker run now assumes `latest` tag if not specified
* Enhance security on Linux capabilities and device nodes
## 0.11.1 (2014-05-07)
#### Registry
- Fix push and pull to private registry
## 0.11.0 (2014-05-07)
#### Notable features since 0.10.0
* SELinux support for mount and process labels
* Linked containers can be accessed by hostname
* Use the net `--net` flag to allow advanced network configuration such as host networking so that containers can use the host's network interfaces
* Add a ping endpoint to the Remote API to do healthchecks of your docker daemon
* Logs can now be returned with an optional timestamp
* Docker now works with registries that support SHA-512
* Multiple registry endpoints are supported to allow registry mirrors
## 0.10.0 (2014-04-08)
#### Builder
- Fix printing multiple messages on a single line. Fixes broken output during builds.
- Follow symlinks inside container's root for ADD build instructions.
- Fix EXPOSE caching.
#### Documentation
- Add the new options of `docker ps` to the documentation.
- Add the options of `docker restart` to the documentation.
- Update daemon docs and help messages for --iptables and --ip-forward.
- Updated apt-cacher-ng docs example.
- Remove duplicate description of --mtu from docs.
- Add missing -t and -v for `docker images` to the docs.
- Add fixes to the cli docs.
- Update libcontainer docs.
- Update images in docs to remove references to AUFS and LXC.
- Update the nodejs_web_app in the docs to use the new epel RPM address.
- Fix external link on security of containers.
- Update remote API docs.
- Add image size to history docs.
- Be explicit about binding to all interfaces in redis example.
- Document DisableNetwork flag in the 1.10 remote api.
- Document that `--lxc-conf` is lxc only.
- Add chef usage documentation.
- Add example for an image with multiple for `docker load`.
- Explain what `docker run -a` does in the docs.
#### Contrib
- Add variable for DOCKER_LOGFILE to sysvinit and use append instead of overwrite in opening the logfile.
- Fix init script cgroup mounting workarounds to be more similar to cgroupfs-mount and thus work properly.
- Remove inotifywait hack from the upstart host-integration example because it's not necessary any more.
- Add check-config script to contrib.
- Fix fish shell completion.
#### Hack
* Clean up "go test" output from "make test" to be much more readable/scannable.
* Excluse more "definitely not unit tested Go source code" directories from hack/make/test.
+ Generate md5 and sha256 hashes when building, and upload them via hack/release.sh.
- Include contributed completions in Ubuntu PPA.
+ Add cli integration tests.
* Add tweaks to the hack scripts to make them simpler.
#### Remote API
+ Add TLS auth support for API.
* Move git clone from daemon to client.
- Fix content-type detection in docker cp.
* Split API into 2 go packages.
#### Runtime
* Support hairpin NAT without going through Docker server.
- devicemapper: succeed immediately when removing non-existing devices.
- devicemapper: improve handling of devicemapper devices (add per device lock, increase sleep time and unlock while sleeping).
- devicemapper: increase timeout in waitClose to 10 seconds.
- devicemapper: ensure we shut down thin pool cleanly.
- devicemapper: pass info, rather than hash to activateDeviceIfNeeded, deactivateDevice, setInitialized, deleteDevice.
- devicemapper: avoid AB-BA deadlock.
- devicemapper: make shutdown better/faster.
- improve alpha sorting in mflag.
- Remove manual http cookie management because the cookiejar is being used.
- Use BSD raw mode on Darwin. Fixes nano, tmux and others.
- Add FreeBSD support for the client.
- Merge auth package into registry.
- Add deprecation warning for -t on `docker pull`.
- Remove goroutine leak on error.
- Update parseLxcInfo to comply with new lxc1.0 format.
- Fix attach exit on darwin.
- Improve deprecation message.
- Retry to retrieve the layer metadata up to 5 times for `docker pull`.
- Only unshare the mount namespace for execin.
- Merge existing config when committing.
- Disable daemon startup timeout.
- Fix issue #4681: add loopback interface when networking is disabled.
- Add failing test case for issue #4681.
- Send SIGTERM to child, instead of SIGKILL.
- Show the driver and the kernel version in `docker info` even when not in debug mode.
- Always symlink /dev/ptmx for libcontainer. This fixes console related problems.
- Fix issue caused by the absence of /etc/apparmor.d.
- Don't leave empty cidFile behind when failing to create the container.
- Mount cgroups automatically if they're not mounted already.
- Use mock for search tests.
- Update to double-dash everywhere.
- Move .dockerenv parsing to lxc driver.
- Move all bind-mounts in the container inside the namespace.
- Don't use separate bind mount for container.
- Always symlink /dev/ptmx for libcontainer.
- Don't kill by pid for other drivers.
- Add initial logging to libcontainer.
* Sort by port in `docker ps`.
- Move networking drivers into runtime top level package.
+ Add --no-prune to `docker rmi`.
+ Add time since exit in `docker ps`.
- graphdriver: add build tags.
- Prevent allocation of previously allocated ports & prevent improve port allocation.
* Add support for --since/--before in `docker ps`.
- Clean up container stop.
+ Add support for configurable dns search domains.
- Add support for relative WORKDIR instructions.
- Add --output flag for docker save.
- Remove duplication of DNS entries in config merging.
- Add cpuset.cpus to cgroups and native driver options.
- Remove docker-ci.
- Promote btrfs. btrfs is no longer considered experimental.
- Add --input flag to `docker load`.
- Return error when existing bridge doesn't match IP address.
- Strip comments before parsing line continuations to avoid interpreting instructions as comments.
- Fix TestOnlyLoopbackExistsWhenUsingDisableNetworkOption to ignore "DOWN" interfaces.
- Add systemd implementation of cgroups and make containers show up as systemd units.
- Fix commit and import when no repository is specified.
- Remount /var/lib/docker as --private to fix scaling issue.
- Use the environment's proxy when pinging the remote registry.
- Reduce error level from harmless errors.
* Allow --volumes-from to be individual files.
- Fix expanding buffer in StdCopy.
- Set error regardless of attach or stdin. This fixes #3364.
- Add support for --env-file to load environment variables from files.
- Symlink /etc/mtab and /proc/mounts.
- Allow pushing a single tag.
- Shut down containers cleanly at shutdown and wait forever for the containers to shut down. This makes container shutdown on daemon shutdown work properly via SIGTERM.
- Don't throw error when starting an already running container.
- Fix dynamic port allocation limit.
- remove setupDev from libcontainer.
- Add API version to `docker version`.
- Return correct exit code when receiving signal and make SIGQUIT quit without cleanup.
- Fix --volumes-from mount failure.
- Allow non-privileged containers to create device nodes.
- Skip login tests because of external dependency on a hosted service.
- Deprecate `docker images --tree` and `docker images --viz`.
- Deprecate `docker insert`.
- Include base abstraction for apparmor. This fixes some apparmor related problems on Ubuntu 14.04.
- Add specific error message when hitting 401 over HTTP on push.
- Fix absolute volume check.
- Remove volumes-from from the config.
- Move DNS options to hostconfig.
- Update the apparmor profile for libcontainer.
- Add deprecation notice for `docker commit -run`.
## 0.9.1 (2014-03-24)
#### Builder
- Fix printing multiple messages on a single line. Fixes broken output during builds.
#### Documentation
- Fix external link on security of containers.
#### Contrib
- Fix init script cgroup mounting workarounds to be more similar to cgroupfs-mount and thus work properly.
- Add variable for DOCKER_LOGFILE to sysvinit and use append instead of overwrite in opening the logfile.
#### Hack
- Generate md5 and sha256 hashes when building, and upload them via hack/release.sh.
#### Remote API
- Fix content-type detection in `docker cp`.
#### Runtime
- Use BSD raw mode on Darwin. Fixes nano, tmux and others.
- Only unshare the mount namespace for execin.
- Retry to retrieve the layer metadata up to 5 times for `docker pull`.
- Merge existing config when committing.
- Fix panic in monitor.
- Disable daemon startup timeout.
- Fix issue #4681: add loopback interface when networking is disabled.
- Add failing test case for issue #4681.
- Send SIGTERM to child, instead of SIGKILL.
- Show the driver and the kernel version in `docker info` even when not in debug mode.
- Always symlink /dev/ptmx for libcontainer. This fixes console related problems.
- Fix issue caused by the absence of /etc/apparmor.d.
- Don't leave empty cidFile behind when failing to create the container.
- Improve deprecation message.
- Fix attach exit on darwin.
- devicemapper: improve handling of devicemapper devices (add per device lock, increase sleep time, unlock while sleeping).
- devicemapper: succeed immediately when removing non-existing devices.
- devicemapper: increase timeout in waitClose to 10 seconds.
- Remove goroutine leak on error.
- Update parseLxcInfo to comply with new lxc1.0 format.
returnnil,resp.StatusCode,fmt.Errorf("Error: request returned %s for API route and version %s, check if the server supports the requested API version",http.StatusText(resp.StatusCode),req.URL)
t.Fatalf("Error parsing volume flags, `-v /hostTmp:/containerTmp -v /hostVar:/containerVar` should mount-bind /hostTmp into /containeTmp and /hostVar into /hostContainer. Received %v",hostConfig.Binds)
t.Fatalf("Error parsing volume flags, `-v /hostTmp:/containerTmp:ro -v /hostVar:/containerVar:rw` should mount-bind /hostTmp into /containeTmp and /hostVar into /hostContainer. Received %v",hostConfig.Binds)
t.Fatalf("Error parsing volume flags, `-v /hostTmp:/containerTmp -v /containerVar` should mount-bind only /hostTmp into /containeTmp. Received %v",hostConfig.Binds)
complete-c docker -f-n'__fish_docker_no_subcommand'-s D -l debug -d'Enable debug mode'
complete-c docker -f-n'__fish_docker_no_subcommand'-s G -l group -d"Group to assign the unix socket specified by -H when running in daemon mode; use '' (the empty string) to disable setting of a group"
complete-c docker -f-n'__fish_docker_no_subcommand'-s H -l host -d'tcp://host:port, unix://path/to/socket, fd://* or fd://socketfd to use in daemon mode. Multiple sockets can be specified'
complete-c docker -f-n'__fish_docker_no_subcommand'-l api-enable-cors -d'Enable CORS headers in the remote API'
complete-c docker -f-n'__fish_docker_no_subcommand'-s b -l bridge -d"Attach containers to a pre-existing network bridge; use 'none' to disable container networking"
complete-c docker -f-n'__fish_docker_no_subcommand'-l bip -d"Use this CIDR notation address for the network bridge's IP, not compatible with -b"
complete-c docker -f-n'__fish_docker_no_subcommand'-s d -l daemon -d'Enable daemon mode'
complete-c docker -f-n'__fish_docker_no_subcommand'-l dns -d'Force docker to use specific DNS servers'
complete-c docker -f-n'__fish_docker_no_subcommand'-s e -lexec-driver -d'Force the docker runtime to use a specific exec driver'
complete-c docker -f-n'__fish_docker_no_subcommand'-s g -l graph -d'Path to use as the root of the docker runtime'
complete-c docker -f-n'__fish_docker_no_subcommand'-l ip -d'Default IP address to use when binding container ports'
complete-c docker -f-n'__fish_docker_no_subcommand'-l ip-forward -d'Disable enabling of net.ipv4.ip_forward'
complete-c docker -f-n'__fish_docker_no_subcommand'-l iptables -d"Disable docker's addition of iptables rules"
complete-c docker -f-n'__fish_docker_no_subcommand'-l mtu -d'Set the containers network MTU; if no value is provided: default to the default route MTU or 1500 if not default route is available'
complete-c docker -f-n'__fish_docker_no_subcommand'-l mtu -d'Set the containers network MTU; if no value is provided: default to the default route MTU or 1500 if no default route is available'
complete-c docker -f-n'__fish_docker_no_subcommand'-s p -l pidfile -d'Path to use for daemon PID file'
complete-c docker -f-n'__fish_docker_no_subcommand'-s r -l restart -d'Restart previously running containers'
complete-c docker -f-n'__fish_docker_no_subcommand'-s s -l storage-driver -d'Force the docker runtime to use a specific storage driver'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-s q -l quiet -d'Suppress the verbose output generated by the containers'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-l rm -d'Remove intermediate containers after a successful build'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-s t -l tag -d'Repository name (and optionally a tag) to be applied to the resulting image in case of success'
@@ -100,16 +102,16 @@ complete -c docker -A -f -n '__fish_seen_subcommand_from export' -a '(__fish_pri
# history
complete -c docker -f -n '__fish_docker_no_subcommand' -a history -d 'Show the history of an image'
complete -c docker -A -f -n '__fish_seen_subcommand_from images' -s a -l all -d 'show all images (by default filter out the intermediate images used to build)'
complete -c docker -A -f -n '__fish_seen_subcommand_from images' -s a -l all -d 'Show all images (by default filter out the intermediate image layers)'
Dockerfile - automate the steps of creating a Docker image
# INTRODUCTION
The **Dockerfile** is a configuration file that automates the steps of creating
a Docker image. It is similar to a Makefile. Docker reads instructions from the
**Dockerfile** to automate the steps otherwise performed manually to create an
image. To build an image, create a file called **Dockerfile**. The
**Dockerfile** describes the steps taken to assemble the image. When the
**Dockerfile** has been created, call the **docker build** command, using the
path of directory that contains **Dockerfile** as the argument.
# SYNOPSIS
INSTRUCTION arguments
For example:
FROM image
# DESCRIPTION
A Dockerfile is a file that automates the steps of creating a Docker image.
A Dockerfile is similar to a Makefile.
# USAGE
**sudo docker build .**
-- runs the steps and commits them, building a final image
The path to the source repository defines where to find the context of the
build. The build is run by the docker daemon, not the CLI. The whole
context must be transferred to the daemon. The Docker CLI reports
"Sending build context to Docker daemon" when the context is sent to the daemon.
**sudo docker build -t repository/tag .**
-- specifies a repository and tag at which to save the new image if the build
succeeds. The Docker daemon runs the steps one-by-one, commiting the result
to a new image if necessary before finally outputting the ID of the new
image. The Docker daemon automatically cleans up the context it is given.
Docker re-uses intermediate images whenever possible. This significantly
accelerates the *docker build* process.
# FORMAT
**FROM image**
or
**FROM image:tag**
-- The FROM instruction sets the base image for subsequent instructions. A
valid Dockerfile must have FROM as its first instruction. The image can be any
valid image. It is easy to start by pulling an image from the public
repositories.
-- FROM must be he first non-comment instruction in Dockerfile.
-- FROM may appear multiple times within a single Dockerfile in order to create
multiple images. Make a note of the last image id output by the commit before
each new FROM command.
-- If no tag is given to the FROM instruction, latest is assumed. If the used
tag does not exist, an error is returned.
**MAINTAINER**
--The MAINTAINER instruction sets the Author field for the generated images.
**RUN**
--RUN has two forms:
**RUN <command>**
-- (the command is run in a shell - /bin/sh -c)
**RUN ["executable", "param1", "param2"]**
--The above is executable form.
--The RUN instruction executes any commands in a new layer on top of the
current image and commits the results. The committed image is used for the next
step in Dockerfile.
--Layering RUN instructions and generating commits conforms to the core
concepts of Docker where commits are cheap and containers can be created from
any point in the history of an image. This is similar to source control. The
exec form makes it possible to avoid shell string munging. The exec form makes
it possible to RUN commands using a base image that does not contain /bin/sh.
**CMD**
--CMD has three forms:
**CMD ["executable", "param1", "param2"]** This is the preferred form, the
exec form.
**CMD ["param1", "param2"]** This command provides default parameters to
ENTRYPOINT)
**CMD command param1 param2** This command is run as a shell.
--There can be only one CMD in a Dockerfile. If more than one CMD is listed, only
the last CMD takes effect.
The main purpose of a CMD is to provide defaults for an executing container.
These defaults may include an executable, or they can omit the executable. If
they omit the executable, an ENTRYPOINT must be specified.
When used in the shell or exec formats, the CMD instruction sets the command to
be executed when running the image.
If you use the shell form of of the CMD, the <command> executes in /bin/sh -c:
**FROM ubuntu**
**CMD echo "This is a test." | wc -**
If you run <command> wihtout a shell, then you must express the command as a
JSON arry and give the full path to the executable. This array form is the
preferred form of CMD. All additional parameters must be individually expressed
as strings in the array:
**FROM ubuntu**
**CMD ["/usr/bin/wc","--help"]**
To make the container run the same executable every time, use ENTRYPOINT in
combination with CMD.
If the user specifies arguments to docker run, the specified commands override
the default in CMD.
Do not confuse **RUN** with **CMD**. RUN runs a command and commits the result. CMD
executes nothing at build time, but specifies the intended command for the
image.
**EXPOSE**
--**EXPOSE <port> [<port>...]**
The **EXPOSE** instruction informs Docker that the container listens on the
specified network ports at runtime. Docker uses this information to
interconnect containers using links, and to set up port redirection on the host
system.
**ENV**
--**ENV <key> <value>**
The ENV instruction sets the environment variable <key> to
the value <value>. This value is passed to all future RUN instructions. This is
functionally equivalent to prefixing the command with **<key>=<value>**. The
environment variables that are set with ENV persist when a container is run
from the resulting image. Use docker inspect to inspect these values, and
change them using docker run **--env <key>=<value>.**
Note that setting Setting **ENV DEBIAN_FRONTEND noninteractive** may cause
unintended consequences, because it will persist when the container is run
interactively, as with the following command: **docker run -t -i image bash**
**ADD**
--**ADD <src> <dest>** The ADD instruction copies new files from <src> and adds them
to the filesystem of the container at path <dest>. <src> must be the path to a
file or directory relative to the source directory that is being built (the
context of the build) or a remote file URL. <dest> is the absolute path to
which the source is copied inside the target container. All new files and
directories are created with mode 0755, with uid and gid 0.
**ENTRYPOINT**
--**ENTRYPOINT** has two forms: ENTRYPOINT ["executable", "param1", "param2"]
(This is like an exec, and is the preferred form.) ENTRYPOINT command param1
param2 (This is running as a shell.) An ENTRYPOINT helps you configure a
container that can be run as an executable. When you specify an ENTRYPOINT,
the whole container runs as if it was only that executable. The ENTRYPOINT
instruction adds an entry command that is not overwritten when arguments are
passed to docker run. This is different from the behavior of CMD. This allows
arguments to be passed to the entrypoint, for instance docker run <image> -d
passes the -d argument to the ENTRYPOINT. Specify parameters either in the
ENTRYPOINT JSON array (as in the preferred exec form above), or by using a CMD
statement. Parameters in the ENTRYPOINT are not overwritten by the docker run
arguments. Parameters specifies via CMD are overwritten by docker run
arguments. Specify a plain string for the ENTRYPOINT, and it will execute in
/bin/sh -c, like a CMD instruction:
FROM ubuntu
ENTRYPOINT wc -l -
This means that the Dockerfile's image always takes stdin as input (that's
what "-" means), and prints the number of lines (that's what "-l" means). To
make this optional but default, use a CMD:
FROM ubuntu
CMD ["-l", "-"]
ENTRYPOINT ["/usr/bin/wc"]
**VOLUME**
--**VOLUME ["/data"]**
The VOLUME instruction creates a mount point with the specified name and marks
it as holding externally-mounted volumes from the native host or from other
containers.
**USER**
-- **USER daemon**
The USER instruction sets the username or UID that is used when running the
image.
**WORKDIR**
-- **WORKDIR /path/to/workdir**
The WORKDIR instruction sets the working directory for the **RUN**, **CMD**, and **ENTRYPOINT** Dockerfile commands that follow it.
It can be used multiple times in a single Dockerfile. Relative paths are defined relative to the path of the previous **WORKDIR** instruction. For example:
**WORKDIR /a WORKDIR /b WORKDIR c RUN pwd**
In the above example, the output of the **pwd** command is **a/b/c**.
**ONBUILD**
-- **ONBUILD [INSTRUCTION]**
The ONBUILD instruction adds a trigger instruction to the image, which is
executed at a later time, when the image is used as the base for another
build. The trigger is executed in the context of the downstream build, as
if it had been inserted immediately after the FROM instruction in the
downstream Dockerfile. Any build instruction can be registered as a
trigger. This is useful if you are building an image to be
used as a base for building other images, for example an application build
environment or a daemon to be customized with a user-specific
configuration. For example, if your image is a reusable python
application builder, it requires application source code to be
added in a particular directory, and might require a build script
to be called after that. You can't just call ADD and RUN now, because
you don't yet have access to the application source code, and it
is different for each application build. Providing
application developers with a boilerplate Dockerfile to copy-paste
into their application is inefficient, error-prone, and
difficult to update because it mixes with application-specific code.
The solution is to use **ONBUILD** to register instructions in advance, to
run later, during the next build stage.
# HISTORY
*May 2014, Compiled by Zac Dover (zdover at redhat dot com) based on docker.io Dockerfile documentation.
If you \fBdocker run\fR a container in detached mode (\fB-d\fR), you can reattach to the detached container with \fBdocker attach\fR using the container's ID or name.
.sp
You can detach from the container again (and leave it running) with CTRL-c (for a quiet exit) or CTRL-\ to get a stacktrace of the Docker client when it quits. When you detach from the container the exit code will be returned to the client.
In this example the top command is run inside a container, from an image called fedora, in detached mode. The ID from the container is passed into the \fBdocker attach\fR command:
.sp
.nf
.RS
# ID=$(sudo docker run -d fedora /usr/bin/top -b)
# sudo docker attach $ID
top - 02:05:52 up 3:05, 0 users, load average: 0.01, 0.02, 0.05
docker-build \- Build an image from a Dockerfile source at PATH
.SHSYNOPSIS
.Bdockerbuild
[\fB--no-cache\fR[=\fIfalse\fR]
[\fB-q\fR|\fB--quiet\fR[=\fIfalse\fR]
[\fB--rm\fR[=\fitrue\fR]]
[\fB-t\fR|\fB--tag\fR=\fItag\fR]
PATH | URL | -
.SHDESCRIPTION
This will read the Dockerfile from the directory specified in \fBPATH\fR. It also sends any other files and directories found in the current directory to the Docker daemon. The contents of this directory would be used by ADD command found within the Dockerfile.
Warning, this will send a lot of data to the Docker daemon if the current directory contains a lot of data.
If the absolute path is provided instead of ‘.’, only the files and directories required by the ADD commands from the Dockerfile will be added to the context and transferred to the Docker daemon.
.sp
When a single Dockerfile is given as URL, then no context is set. When a Git repository is set as URL, the repository is used as context.
When set to true, do not use a cache when building the image. The default is \fIfalse\fR.
.sp
.SHEXAMPLES
.sp
.sp
.BBuildinganimagefromcurrentdirectory
.TP
USing a Dockerfile, Docker images are built using the build command:
.sp
.RS
docker build .
.RE
.sp
If, for some reasone, you do not what to remove the intermediate containers created during the build you must set--rm=false.
.sp
.RS
docker build --rm=false .
.sp
.RE
.sp
A good practice is to make a subdirectory with a related name and create the Dockerfile in that directory. E.g. a directory called mongo may contain a Dockerfile for a MongoDB image, or a directory called httpd may contain an Dockerfile for an Apache web server.
.sp
It is also good practice to add the files required for the image to the subdirectory. These files will be then specified with the `ADD` instruction in the Dockerfile. Note: if you include a tar file, which is good practice, then Docker will automatically extract the contents of the tar file specified in the `ADD` instruction into the specified target.
.sp
.BBuildinganimagecontainerusingaURL
.TP
This will clone the Github repository and use it as context. The Dockerfile at the root of the repository is used as Dockerfile. This only works if the Github repository is a dedicated repository. Note that you can specify an arbitrary Git repository by using the ‘git://’ schema.
docker-images \- List the images in the local repository
.SHSYNOPSIS
.Bdockerimages
[\fB-a\fR|\fB--all\fR=\fIfalse\fR]
[\fB--no-trunc\fR[=\fIfalse\fR]
[\fB-q\fR|\fB--quiet\fR[=\fIfalse\fR]
[\fB-t\fR|\fB--tree\fR=\fIfalse\fR]
[\fB-v\fR|\fB--viz\fR=\fIfalse\fR]
[NAME]
.SHDESCRIPTION
This command lists the images stored in the local Docker repository.
.sp
By default, intermediate images, used during builds, are not listed. Some of the output, e.g. image ID, is truncated, for space reasons. However the truncated image ID, and often the first few characters, are enough to be used in other Docker commands that use the image ID. The output includes repository, tag, image ID, date created and the virtual size.
.sp
The title REPOSITORY for the first title may seem confusing. It is essentially the image name. However, because you can tag a specific image, and multiple tags (image instances) can be associated with a single name, the name is really a repository for all tagged images of the same name.
When set to true, list the graph in graphviz format. The default is \fIfalse\fR.
.sp
.SHEXAMPLES
.sp
.BListingtheimages
.TP
To list the images in a local repository (not the registry) run:
.sp
.RS
docker images
.RE
.sp
The list will contain the image repository name, a tag for the image, and an image ID, when it was created and its virtual size. Columns: REPOSITORY, TAG, IMAGE ID, CREATED, and VIRTUAL SIZE.
.sp
To get a verbose list of images which contains all the intermediate images used in builds use \fB-a\fR:
.sp
.RS
docker images -a
.RE
.sp
.BListimagesdependencytreehierarchy
.TP
To list the images in the local repository (not the registry) in a dependency tree format then use the \fB-t\fR|\fB--tree=true\fR option.
.sp
.RS
docker images -t
.RE
.sp
This displays a staggered hierarchy tree where the less indented image is the oldest with dependent image layers branching inward (to the right) on subsequent lines. The newest or top level image layer is listed last in any tree branch.
.sp
.BListimagesinGraphVizformat
.TP
To display the list in a format consumable by a GraphViz tools run with \fB-v\fR|\fB--viz=true\fR. For example to produce a .png graph file of the hierarchy use:
.sp
.RS
docker images --viz | dot -Tpng -o docker.png
.sp
.RE
.sp
.BListingonlytheshortenedimageIDs
.TP
Listing just the shortened image IDs. This can be useful for some automated tools.
.sp
.RS
docker images -q
.RE
.sp
.SHHISTORY
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
This command displays system wide information regarding the Docker installation. Information displayed includes the number of containers and images, pool name, data file, metadata file, data space used, total data space, metadata space used, total metadata space, execution driver, and the kernel version.
.sp
The data file is where the images are stored and the metadata file is where the meta data regarding those images are stored. When run for the first time Docker allocates a certain amount of data space and meta data space from the space available on the volume where /var/lib/docker is mounted.
.SH"OPTIONS"
There are no available options.
.sp
.SHEXAMPLES
.sp
.BDisplayDockersysteminformation
.TP
Here is a sample output:
.sp
.RS
# docker info
Containers: 18
Images: 95
Storage Driver: devicemapper
Pool Name: docker-8:1-170408448-pool
Data file: /var/lib/docker/devicemapper/devicemapper/data
docker-inspect \- Return low-level information on a container/image
.SHSYNOPSIS
.Bdockerinspect
[\fB-f\fR|\fB--format\fR=""
CONTAINER|IMAGE[CONTAINER|IMAGE...]
.SHDESCRIPTION
This displays all the information available in Docker for a given container or image. By default, this will render all results in a JSON array. If a format is specified, the given template will be executed for each result.
This will remove one or more containers from the host node. The container name or ID can be used. This does not remove images. You cannot remove a running container unless you use the \fB-f\fR option. To see all containers on a host use the \fBdocker ps -a\fR command.
To remove a container using its ID, find either from a \fBdocker ps -a\fR command, or use the ID returned from the \fBdocker run\fR command, or retrieve it from a file used to store it using the \fBdocker run --cidfile\fR:
.sp
.RS
docker rm abebf7571666
.RE
.sp
.BRemovingacontainerusingthecontainername:
.TP
The name of the container can be found using the \fBdocker ps -a\fR command. The use that name as follows:
.sp
.RS
docker rm hopeful_morse
.RE
.sp
.SHHISTORY
March 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
`docker rm` will remove one or more containers from the host node. The container name or ID can be used. This does not remove images. You cannot remove a running container unless you use the \fB-f\fR option. To see all containers on a host use the `docker ps -a` command.
OPTIONS
-------
`-f`, `--force`=*true*|*false*:
When set to true, force the removal of the container. The default is *false*.
`-l`, `--link`=*true*|*false*:
When set to true, remove the specified link and not the underlying container. The default is *false*.
`-v`, `--volumes`=*true*|*false*:
When set to true, remove the volumes associated to the container. The default is *false*.
EXAMPLES
--------
##Removing a container using its ID##
To remove a container using its ID, find either from a `docker ps -a` command, or use the ID returned from the `docker run` command, or retrieve it from a file used to store it using the `docker run --cidfile`:
docker rm abebf7571666
##Removing a container using the container name##
The name of the container can be found using the \fBdocker ps -a\fR command. The use that name as follows:
docker rm hopeful_morse
HISTORY
-------
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
This will remove one or more images from the host node. This does not remove images from a registry. You cannot remove an image of a running container unless you use the \fB-f\fR option. To see all images on a host use the \fBdocker images\fR command.
Run a process in a new container. \fBdocker run\fR starts a process with its own file system, its own networking, and its own isolated process tree. The \fIIMAGE\fR which starts the process may define defaults related to the process that will be run in the container, the networking to expose, and more, but \fBdocker run\fR gives final control to the operator or administrator who starts the container from the image. For that reason \fBdocker run\fR has more options than any other docker command.
If the \fIIMAGE\fR is not already loaded then \fBdocker run\fR will pull the \fIIMAGE\fR, and all image dependencies, from the repository in the same way running \fBdocker pull\fR\fIIMAGE\fR, before it starts the container from that image.
UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
UUID short identifier (“f78375b1c487”)
Name (“jonah”)
.fi
.sp
The UUID identifiers come from the Docker daemon, and if a name is not assigned to the container with \fB--name\fR then the daemon will also generate a random string name. The name is useful when defining links (see \fB--link\fR) (or any other place you need to identify a container). This works for both background and foreground Docker containers.
When the operator executes \fBdocker run -privileged\fR, Docker will enable access to all devices on the host as well as set some configuration in AppArmor (\fB???\fR) to allow the container nearly all the same access to the host as processes running outside of a container on the host.
If you want messages that are logged in your container to show up in the host's syslog/journal then you should bind mount the /var/log directory as follows.
.sp
.RS
docker run -v /dev/log:/dev/log -i -t fedora /bin/bash
.RE
.sp
From inside the container you can test this by sending a message to the log.
.sp
.RS
logger "Hello from my container"
.sp
.RE
Then exit and check the journal.
.RS
.sp
exit
.sp
journalctl -b | grep hello
.RE
.sp
This should list the message sent to logger.
.sp
.BAttachingtooneormorefromSTDIN,STDOUT,STDERR
.TP
If you do not specify -a then Docker will attach everything (stdin,stdout,stderr). You can specify to which of the three standard streams (stdin, stdout, stderr) you’d like to connect instead, as in:
.sp
.RS
docker run -a stdin -a stdout -i -t fedora /bin/bash
.RE
.sp
.BLinkingContainers
.TP
The link feature allows multiple containers to communicate with each other. For example, a container whose Dockerfile has exposed port 80 can be run and named as follows:
.sp
.RS
docker run --name=link-test -d -i -t fedora/httpd
.RE
.sp
.TP
A second container, in this case called linker, can communicate with the httpd container, named link-test, by running with the \fB--link=<name>:<alias>\fR
.sp
.RS
docker run -t -i --link=link-test:lt --name=linker fedora /bin/bash
.RE
.sp
.TP
Now the container linker is linked to container link-test with the alias lt. Running the \fBenv\fR command in the linker container shows environment variables with the LT (alias) context (\fBLT_\fR)
The exposed port of an application can be mapped to a host port using the \fB-p\fR flag. For example a httpd port 80 can be mapped to the host port 8080 using the following:
.sp
.RS
docker run -p 8080:80 -d -i -t fedora/httpd
.RE
.sp
.TP
.BCreatingandMountingaDataVolumeContainer
.TP
Many applications require the sharing of persistent data across several containers. Docker allows you to create a Data Volume Container that other containers can mount from. For example, create a named container that contains directories /var/volume1 and /tmp/volume2. The image will need to contain these directories so a couple of RUN mkdir instructions might be required for you fedora-data image:
docker run --volumes-from=data --name=fedora-container1 -i -t fedora bash
.RE
.sp
.TP
Multiple --volumes-from parameters will bring together multiple data volumes from multiple containers. And it's possible to mount the volumes that came from the DATA container in yet another container via the fedora-container1 intermidiery container, allowing to abstract the actual data source from users of that data:
.sp
.RS
docker run --volumes-from=fedora-container1 --name=fedora-container2 -i -t fedora bash
.RE
.TP
.sp
.BMountingExternalVolumes
.TP
To mount a host directory as a container volume, specify the absolute path to the directory and the absolute path for the container directory separated by a colon:
.sp
.RS
docker run -v /var/db:/data1 -i -t fedora bash
.RE
.sp
.TP
When using SELinux, be aware that the host has no knowledge of container SELinux policy. Therefore, in the above example, if SELinux policy is enforced, the /var/db directory is not writable to the container. A "Permission Denied" message will occur and an avc: message in the host's syslog.
.sp
.TP
To work around this, at time of writing this man page, the following command needs to be run in order for the proper SELinux policy type label to be attached to the host directory:
.sp
.RS
chcon -Rt svirt_sandbox_file_t /var/db
.RE
.sp
.TP
Now, writing to the /data1 volume in the container will be allowed and the changes will also be reflected on the host in /var/db.
.sp
.SHHISTORY
March 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
docker \- Docker image and container command line interface
.SHSYNOPSIS
.Bdocker[OPTIONS][COMMAND][arg...]
.SHDESCRIPTION
\fBdocker\fR has two distinct functions. It is used for starting the Docker daemon and to run the CLI (i.e., to command the daemon to manage images, containers etc.) So \fBdocker\fR is both a server as deamon and a client to the daemon through the CLI.
.sp
To run the Docker deamon you do not specify any of the commands listed below but must specify the \fB-d\fR option. The other options listed below are for the daemon only.
.sp
The Docker CLI has over 30 commands. The commands are listed below and each has its own man page which explain usage and arguements.
.sp
To see the man page for a command run \fBman docker <command>\fR.
echo >&2'warning: this script is deprecated - see mkimage.sh and mkimage/debootstrap'
echo >&2
variant='minbase'
include='iproute,iputils-ping'
arch='amd64'# intentionally undocumented for now
@@ -43,7 +47,7 @@ usage() {
debianStable=wheezy
debianUnstable=sid
# this should match the name found at http://releases.ubuntu.com/
ubuntuLatestLTS=precise
ubuntuLatestLTS=trusty
# this should match the name found at http://releases.tanglu.org/
tangluLatest=aequorea
@@ -219,6 +223,7 @@ if [ -z "$strictDebootstrap" ]; then
# make sure our packages lists are as up to date as we can get them
sudo chroot . apt-get update
sudo chroot . apt-get dist-upgrade -y
fi
if["$justTar"];then
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Michael Crosby