The tests weren't ... tested when last edited, this patch fixes
them so that they run and pass correctly.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This patch fixes the fact that the tests for pkg/networkfs/etchosts
couldn't build due to syntax errors.
Docker-DCO-1.1-Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> (github: cyphar)
This moves the Attach method from the container to the daemon. This
method mostly supports the http attach logic and does not have anything
to do with the running of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This updates systemd.Apply to match the fs backend by:
* Always join blockio controller (for stats)
* Support CpusetCpus
* Support MemorySwap
Also, it removes the generic UnitProperties in favour of a single
option to set the slice.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Also make sure we copy the joining containers hosts and resolv.conf with
the hostname if we are joining it's network stack.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Updating CONTRIBUTING to include the correct URL for the post-commit hook.
Docker-DCO-1.1-Signed-off-by: Aaron Huslage <huslage@gmail.com> (github: huslage)
- Fix boot2docker url
- move HomeBrew instructions to a separate section
- fix docker client 5-liner to work (its still ugly)
- fix and update program output
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
A command like:
docker run --expose 5353/tcp -P fedora sleep 10
Currently fails with:
Error: Cannot start container 5c558de5f0bd85ff14e13e3691aefbe531346297a27d4b3562732baa8785b34a: unknown protocol
This is because nat.SplitProtoPort() confuses the order of the port and
proto in 5353/tcp, assuming the protocol is first. However, in all other
places in docker the protocol is last, so the fix is just to swap these.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If you run the tutorial step-by-step, following error occurs:
```$ sudo docker logs $container_id
Usage: docker logs CONTAINER
Fetch the logs of a container
-f, --follow=false: Follow log output```
This is obviously because bash variables are case-sensitive, so it mustn't be `CONTAINER_ID` above.
Docker-DCO-1.1-Signed-off-by: Mateusz Sulima <sulima.mateusz@email.com> (github: github_handle)
This continues the effort to separate all registry logic from the
deprecated `Server` object.
* 'search' is exposed by `github.com/dotcloud/docker/registry/Service`
* Added proper documentation of Search while I was at it
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This is the first step towards separating the registry subsystem from
the deprecated `Server` object.
* New service `github.com/dotcloud/docker/registry/Service`
* The service is installed by default in `builtins`
* The service only exposes `auth` for now...
* ...Soon to be followed by `pull`, `push` and `search`.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
I've seen one other missing space that I addressed in another PR already.
I don't know whether that is a common occurrence in the docs.
About the second diff chunk, it looks like some copy-paste mistake to me.
Docker-DCO-1.1-Signed-off-by: Felix Rabe <felix@rabe.io> (github: felixrabe)
This allows using `Engine.Register` and `Engine.RegisterCatchall` on the
same engine without the catchall hiding all other handlers.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This is required to address a race condition described in #5553,
where a container can be partially deleted -- for example, the
root filesystem but not the init filesystem -- which makes
it impossible to delete the container without re-adding the
missing filesystems manually.
This behavior has been witnessed when rebooting boxes that
are configured to remove containers on shutdown in parallel
with stopping the Docker daemon.
Docker-DCO-1.1-Signed-off-by: Gabriel Monroy <gabriel@opdemand.com> (github: gabrtv)
We don't have the flexibility to do extra things with lxc because it is
a black box and most fo the magic happens before we get a chance to
interact with it in dockerinit.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
There is not need for the remount hack, we use aa_change_onexec so the
apparmor profile is not applied until we exec the users app.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
- git mv archived/* .
- put the links back into the summary document
- reduce the header depth by 1 so the TOC lists each API version
- update the mkdocs.yaml to render the archived API docs, but not add
them to the menu/nav
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
This also cleans up some of the left over restriction paths code from
before.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
It has been pointed out that some files in /proc and /sys can be used
to break out of containers. However, if those filesystems are mounted
read-only, most of the known exploits are mitigated, since they rely
on writing some file in those filesystems.
This does not replace security modules (like SELinux or AppArmor), it
is just another layer of security. Likewise, it doesn't mean that the
other mitigations (shadowing parts of /proc or /sys with bind mounts)
are useless. Those measures are still useful. As such, the shadowing
of /proc/kcore is still enabled with both LXC and native drivers.
Special care has to be taken with /proc/1/attr, which still needs to
be mounted read-write in order to enable the AppArmor profile. It is
bind-mounted from a private read-write mount of procfs.
All that enforcement is done in dockerinit. The code doing the real
work is in libcontainer. The init function for the LXC driver calls
the function from libcontainer to avoid code duplication.
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
This is needed for Send/Recieve to correctly handle borders between
the messages.
The framing uses a single 32bit uint32 length for each frame, of which
the high bit is used to indicate whether the message contains a file
descriptor or not. This is enough to separate out each message sent
and to decide to which message each file descriptors belongs, even
though multiple Sends may be coalesced into a single read, and/or one
Send can be split into multiple writes.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This PR aims to increase the consistency across the docs for
code blocks and code/comment/output markings.
Rule followed here is "what's visible on the screen should be reflected"
Issue:
- Docs had various code blocks showing: comments, commands & outputs.
- All three of these items were inconsistently marked.
Some examples as to how this PR aims to introduce improvements:
1. Removed `> ` from in front of the "outputs". Eg,
` > REPOSITORY TAG ID CREATED` replaced with:
` REPOSITORY TAG ID CREATED`.
2. Introduced `$` for commands. Eg,
` sudo chkconfig docker on` replaced with:
` $ sudo chkconfig docker on`
3. Comments:
` > # ` replaced with:
` # `.
> Please note:
> Due to a vast amount of items reviewed and changed for this PR, there
> might be some individually incorrect replacements OR patterns of incorrect
> replacements. This PR needs to be reviewed and if there is anything missing,
> it should be improved or amended.
Closes:
https://github.com/dotcloud/docker/issues/5286
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
No need to duplicate this information when we already have a
container.json file in the root of libcontainer
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This duplicates some of the Exec code but I think it it worth it because
the native driver is more straight forward and does not have the
complexity have handling the type issues for now.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This temp. expands the Exec method's signature but adds a more robust
way to know when the container's process is actually released and begins
to run. The network interfaces are not guaranteed to be up yet but this
provides a more accurate view with a single callback at this time.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
In the spirit of getting more contributors to maintain their
components.. I nominate @jpetazzo ot maintain dind (he's the original
author).
@jpetazzo I don't expect this to be too much load, but it's a good and
symbolic start :)
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
A WIP pull request or issue for discussion would be a better avenue for collaboration and discussion of a ZFS backend.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This commit makes Docker throw an error if the daemon isn't started as
root.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
These are failing, and indicate things that need to be fixed. The
primarily problem is the lack of framing between beam messages.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
[solomon@docker.com: rebased on master]
Signed-off-by: Solomon Hykes <solomon@docker.com>
Without this patch, containers inherit the open file descriptors of the daemon, so my "exec 42>&2" allows us to "echo >&42 some nasty error with some bad advice" directly into the daemon log. :)
Also, "hack/dind" was already doing this due to issues caused by the inheritance, so I'm removing that hack too since this patch obsoletes it by generalizing it for all containers.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Occasionally the selinux_test program will fail because we are setting file
context based on the Process ID but not the TID. THis change will always
use the TID to set SELinux labels.
Docker-DCO-1.1-Signed-off-by: Daniel Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
Added --selinux-enable switch to daemon to enable SELinux labeling.
The daemon will now generate a new unique random SELinux label when a
container starts, and remove it when the container is removed. The MCS
labels will be stored in the daemon memory. The labels of containers will
be stored in the container.json file.
When the daemon restarts on boot or if done by an admin, it will read all containers json files and reserve the MCS labels.
A potential problem would be conflicts if you setup thousands of containers,
current scheme would handle ~500,000 containers.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: crosbymichael)
This has every container using the docker daemon's pid for the processes
label so it does not work correctly.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Creating the "docker save" tarball for "scratch" is pretty simple. I've also extrapolated the "docker build -t busybox ." logic into a separate "hack/make/.ensure-busybox" file so that it can eventually be reused easier.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
It was a nice idea to recruit more maintainers but we never found the
time to do it properly...
I am still interested in any ideas to make it easier to start
contributing!
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
I tested to verify that if neither package is available (for example, on Debian Wheezy), apt still continues installing properly.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
These are unnecessary since the user package handles these cases properly already (as evidenced by the LXC backend not having these special cases).
I also updated the errors returned to match the other libcontainer error messages in this same file.
Also, switching from Setresuid to Setuid directly isn't a problem, because the "setuid" system call will automatically do that if our own effective UID is root currently: (from `man 2 setuid`)
setuid() sets the effective user ID of the calling process. If the
effective UID of the caller is root, the real UID and saved set-user-
ID are also set.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This adds back in the references to private repositories and
provides some refactoring to the Working with repositories
documentation including updating references to the "Central"
registry to Docker.io.
It also:
* Fixes some links and references to Central Index
* Fixes anchors in other files to updated titles in Working with Repositories.
* Renamed Central Index in the remaining places.
* Updated terms documentation to reflect Docker.io
* Updated some Docker Index naming to be consistent.
* Updates menu labels and hyperlinks.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Correct documentation for POST /commit to reflect that the container's
configuration is supplied in the request body, and not as a query
parameter.
Also correct a small typo in the example JSON for create container.
Docker-DCO-1.1-Signed-off-by: Andy Goldstein <agoldste@redhat.com> (github: ncdc)
Docs' BG was original "#fff" and blocks such as code blocks or
warning-notes blocks were coloured in #F2F2F2.
In order to make it easier to read everything, the BG colour was
changed to #fff. However, the switch missed to convert other blocks'
BG colour.
This commit aims to re-introduce the correct contrast by changing the
BG colour of warning/notes block to #fff.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This commit aims to improve the rendering of code blocks by
reducing the padding, matching the font-size with the rest of the
documentation text and finally, by changing the background colour
back to white from its current gray-ish state which matches the
background colour and making it really hard to spot the code.
Note: The BG colouring issue is due to converting the main BG
to gray whilst missing to change parts that where gray to white, i.e.,
not making the complete switch.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
So far it has been mostly my duty to create and maintain docs' design/theme.
This commit adds myself to the list of maintainers by modifying
the MAINTAINERS file under the docs/theme directory.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This commit removes the "max-width" property of DOM "containers";
Thus letting the viewport to expand to fill the available space.
This commit aims to bring pleasure to Docker docs' readers' eyes,
And to make them happy by letting them profit more from their large
monitors. (or use more efficiently their smaller ones).
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Removed a now unused endpoint from the accounts API.
Updated some of the accounts links to point to www.docker.io
as the account signup and resend-email-confirmation links should
no longer point to the index.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Installer is a standard interface for objects which can "install"
themselves an engine by registering handlers.
This can be used as an entrypoint for external plugins etc.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This will allow for these to be set independently. Keep the current Docker behavior where Memory and MemoryReservation are set to the value of Memory.
Docker-DCO-1.1-Signed-off-by: Victor Marmol <vmarmol@google.com> (github: vmarmol)
relative paths, and also fixed some broken images.
There are still more todo - next PR I think :)
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
- Remove redundant chars and all errors caused by RST->MD conversion.
e.g. [/#, /\, \<, />, etc.]
- Fix broken inter-document links
- Fix outbound links no-longer active or changed
- Fix lists
- Fix code blocks
- Correct apostrophes
- Replace redundant inline note marks for code with code marks
- Fix broken image links
- Remove non-functional title links
- Correct broken cross-docs links
- Improve readability
Note: This PR does not try to fix/amend:
- Grammatical errors
- Lexical errors
- Linguistic-logic errors etc.
It just aims to fix main structural or conversion errors to serve as
a base for further amendments that will cover others including but
not limited to those mentioned above.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Update:
- Fix backtick issues
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
- Mention that [] options may be specified multiple times on the Usage page
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: mikemaccana)
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: SvenDowideit)
This allows the job's status code to be consumed externally so that we
can use it as an exit code or saving to a state file.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Without creating a root there is no way for the engine to return an
error from the new function.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
container.Kill() might read a pid of 0 from
container.State.Pid due to losing a race with
container.monitor() calling
container.State.SetStopped(). Sending a SIGKILL to
pid 0 is undesirable as "If pid equals 0, then sig
is sent to every process in the process group of
the calling process."
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
We used to mount in Create() to be able to create a few files that
needs to be in each device. However, this mount is problematic for
selinux, as we need to set the mount label at mount-time, and it
is not known at the time of Create().
This change just moves the file creation to first Get() call and
drops the mount from Create(). Additionally, this lets us remove
some complexities we had to avoid an extra unmount+mount cycle.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
use the beta-warning area to tell the user what VERSION of docker, git
branch, and links to the official release version docs are.
requires / extends PR #5272
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
This makes the engine more general purpose so that we can
use it and the job routing functionality for reexec'ing our binary
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Conflicts:
integration/runtime_test.go
Installer is a standard interface for objects which can "install"
themselves an engine by registering handlers.
This can be used as an entrypoint for external plugins etc.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Instead of calling syscall.Close() on the fds in sendUnix() we call
Close() on the *os.File in Send(). Otherwise the fd will be closed, but
the *os.File will continue to live, and when it is finalized the
fd will be closed (which by then may be reused and can be anything).
This also adds a note to Send() the the file is closed.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Commands in the pipeline should either implement or pass-through command messages.
This amounts to a proof-of-concept implementation of the "pipeline"
design of Docker plugins.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Grab forklock to make sure no forks accidentally inherit the new fds
before they are made CLOEXEC There is a slight race condition between
ReadMsgUnix returns and when we grap the lock, so this is not
perfect. Unfortunately There is no way to pass MSG_CMSG_CLOEXEC to
recvmsg() nor any way to implement non-blocking i/o in go, so this is
hard to fix.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This avoids false alarms when process exits without printing. Devnull
doesn't require synchronization.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
In the pipeline design, several beam commands can be run concurrently,
with their respective inputs and outputs connected in such a way that
beam messages flow from the first to last. This is similar to the way
a unix shell executes commands in a pipeline: instead of STDIN and
STDOUT, each beam command has a "BEAMIN" and "BEAMOUT".
Since beam allows for richer communication than plain byte streams, beam
pipelines can express more powerful computation, while retaining the
fundamental elegance and ease of use of unix-style composition.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This inserts low-level hooks for interactive step-by-step debugging.
Hooks are triggered by setting the *TEST* environment variable.
This is particularly useful for tracking down file descriptor leaks,
double-closing, or other issues which are difficult to debug with
the usual toolbox.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
The "wiring" is broken because engine does not keep a reference for handling introspection calls.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Automatically switch to interactive mode when stdin is a terminal
* Basic implementation of "responses"
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Close all file descriptors successfully sent as attachment
* Close duplicate file descriptors created by net.FileCon and net.UnixConn.File
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
These convenience functions expose a familiar face to the unknown and bizarre world of beam networking.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This patch includes a stripped down implementation with a bare minimum
unix socket transport. It relies on fd passing for stream multiplexing.
The purpose of this first patch is to allow implementation of dynamic
linking, which will allow advanced service discovery.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
container.Register() checks both IsRunning() and IsGhost(), but at
this point IsGhost() is always true if IsRunning() is true. For a
newly created container both are false, and for a restored-from-disk
container Daemon.load() sets Ghost to true if IsRunning is true. So we
just drop the IsGhost check.
This was the last call to IsGhost, so we remove It and all other
traces of the ghost state.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
* Remove out of date "vacation mode"
* Fix my email address
* Remove infrastructure maintainers to reflect reality (core maintainers
are currently maintaining their own infrastructure).
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* Add notice in server/server.go explaining not to add stuff there, and
what to do instead.
* Make myself a sole maintainer of server/ to avoid concurrent edits
while refactoring.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: contrib/man/md/README.md
modified: contrib/man/md/docker-build.md
modified: contrib/man/md/docker-cp.md
modified: contrib/man/md/docker-logs.md
modified: contrib/man/md/docker-push.md
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
Changes to be committed:
modified: contrib/man/md/docker-build.md
modified: contrib/man/md/docker-commit.md
This also removes all the old man pages, .gitignores their directory, and updates the md2man-all.sh script to be easier to read and more friendly to being called within hack/make/ubuntu.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
All Docker commands have a Markdown page.
Dockerfile used to build a Fedora based pandoc container.
md2man-all.sh is used inside the container.
README.sh includes an explaination on how to build the fedora/pandoc
image and how to run the container directly.
Changes to be committed:
new file: contrib/man/md/Dockerfile
new file: contrib/man/md/README.md
new file: contrib/man/md/docker-attach.md
new file: contrib/man/md/docker-build.md
new file: contrib/man/md/docker-commit.md
new file: contrib/man/md/docker-cp.md
new file: contrib/man/md/docker-diff.md
new file: contrib/man/md/docker-events.md
new file: contrib/man/md/docker-export.md
new file: contrib/man/md/docker-history.md
new file: contrib/man/md/docker-images.md
new file: contrib/man/md/docker-import.md
new file: contrib/man/md/docker-info.md
new file: contrib/man/md/docker-inspect.md
new file: contrib/man/md/docker-kill.md
new file: contrib/man/md/docker-load.md
new file: contrib/man/md/docker-login.md
new file: contrib/man/md/docker-logs.md
new file: contrib/man/md/docker-port.md
new file: contrib/man/md/docker-ps.md
new file: contrib/man/md/docker-pull.md
new file: contrib/man/md/docker-push.md
new file: contrib/man/md/docker-restart.md
new file: contrib/man/md/docker-rm.md
new file: contrib/man/md/docker-rmi.md
new file: contrib/man/md/docker-run.md
new file: contrib/man/md/docker-save.md
new file: contrib/man/md/docker-search.md
new file: contrib/man/md/docker-start.md
new file: contrib/man/md/docker-stop.md
new file: contrib/man/md/docker-tag.md
new file: contrib/man/md/docker-top.md
new file: contrib/man/md/docker-wait.md
new file: contrib/man/md/docker.md
new file: contrib/man/md/md2man-all.sh
This one is a problem because the most useful stat is a string and not a
float like verything else. We may have to change the return type
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Lists with paragraphs as items need blank lines in between
items to generate correct layout.
Docker-DCO-1.1-Signed-off-by: Lance Chen <cyen0312@gmail.com> (github: Lance0312)
Elaborate on the volumes example to prevent confusion.
Update: Amend the example so it is executable by the reader.
This includes fixing the erring "/var/logs" statement with "/var/log".
Update: Fix sentence structuring to better suit the 80chrs. limit.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This was supposed to be part of my previous PR, but somehow got missed.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The current load script does alot of things. If it does not find the
parser loaded on the system it will just exit 0 and not load the
profile. We think it should fail loudly if it cannot load the profile
and apparmor is enabled on the system.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Don't make calls to the registry if the image exists already.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
fs_test.go doesn't finish if Docker's code is placed under a directory
which has symlinks between / and the directory.
For example, the below doesn't finish before the change.
/home -> usr/home
FollowSymlinkInScope("/home/bob/foo/bar", "/home/bob/foo")
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
Fixes#5166
Current graph.restore is essentially O(n^2 log n) due to how
suffixarray creation works.
Rather than create/append/create new this supports creation from a seed
array of ids.
Functional testing shows this eliminates the hang on Creating image
graph reported on list.
Docker-DCO-1.1-Signed-off-by: Paul Nasrat <pnasrat@gmail.com> (github: pnasrat)
change: A fully qualified image name must include a tag.
Recommitting changes for PR: https://github.com/dotcloud/docker/pull/5145
since SvenDowideit suggested I would need to sign my commit for it to be accepted.
Docker-DCO-1.1-Signed-off-by: Justin Simonelis <justin.p.simonelis@gmail.com> (github: jsimonelis)
If the bridge specified using -b/--bridge doesn't
exist, fail instead of attempting to create it.
This is consistent with the docker documentation
on -b/--bridge: "Attach containers to a pre
existing network bridge".
It is also less surprising in an environment where
the operator expected the bridge to be properly
set up before docker starts and expects docker to
fail fast if the bridge was not up instead of
masking this error and coming up in some
potentially broken state.
With this patch, docker still creates docker0 if
needed and no bridge was explicitly specified.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
libcontainer.GetNamespace returns nil on FreeBSD because
libcontainer.namespaceList is empty. In this case, Namespaces#Get should
return nil instead of being panic.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
This commit changes the way docker build cleans up containers.
Containers get cleaned up right away after they've been committed and
they've become an image.
When the build fails, only the last container of the failing step is
left behind.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Explain how to install boot2docker and docker by using homebrew.
Docker-DCO-1.1-Signed-off-by: Jonathan Pares <jonathanpa@users.noreply.github.com> (github: jonathanpa)
Implement system.LUtimesNano and system.UtimesNano. The latter might be
removed in future because it's basically same as os.Chtimes. That's why
the test is mainly focusing LUtimesNano.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
"set -e" is already inherited here from make.sh, but explicit is always better than implicit (hence the "set -e" in the first place!)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
symlink /proc/mounts /var/lib/docker/btrfs/subvolumes/1763d6602b8b871f0a79754f1cb0a31b3928bb95de5232b1b8c15c60fa1017f6-init/etc/mtab: no such file or directory
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
It seems that netlink in older kernels, including RHEL6, does not
support RTM_SETLINK with IFLA_MASTER. It just silently ignores it, reporting
no error, causing netlink.NetworkSetMaster() to not do anything yet
return no error.
We fix this by introducing and using AddToBridge() in a very similar manner
to CreateBridge(), which use the old ioctls directly.
This fixes https://github.com/dotcloud/docker/issues/4668
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This also migrates the volumes from integration tests into the new cli
integration test framework.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
We do not allow ghosts anymore and this test does not add any value
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Warn users of the planned deprecation of 'docker commit --run', and hide
it from the docs and usage message. The option continues to work.
Note that an alternative to 'commit --run' is being implemented but is
not yet available. We are printing the warning anyway because on
the basis that it never hurts to give more advance warning.
The 'commit --run' flag is a leftover from the very early days of Docker,
and has several problems:
1) It is very user unfriendly. You have to pass a literal json dict
which is poorly documented and changes regularly (see PortSpecs vs
ExposedPorts). The merge behavior is not clear and also changes
regularly. it's not possible to unset a value.
2) It overlaps with the Dockerfile syntax. There are 2 ways to set
a default command, expose a port or change an env variable. Some
things can be done in a Dockerfile but not in --run. Some things
can be done in --run but not in a Dockerfile. It would be better
to push a single syntax, allow using it both in a file and via
the command line, and make improvements in a single place.
3) It exposes data structures which should not be publicly exposed.
There are several planned improvements to Docker which require moving
around the content and schema of the various Config, Image and Container
structures. The less of those we expose in public interfaces, the easier
it is to move things around without a reverse compatibility nightmare.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
currently the files created are not readable. This makes the files and
directories permissions more sane.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Previously, running just "hack/release.sh" only ran the unit tests. This updates that to run the unit tests, then the integration tests, then build the binaries, then run the cli integration tests (so we're literally testing the binary we're about to release, which is super freaking cool IMO <3).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Some flags ended with a colon, some didn't. For man pages, the prevailing normal practice is not to end the flags lines with colons.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
`filepath.Abs` does more than just `filepath.IsAbs` - namely, `filepath.Clean`, which resolves things like `.../.` or `.../../...`, and causes even an absolute path like `/some/path/../absolute` to fail (or, in my case, `/path/to/docker/.`)
Just using `filepath.IsAbs` directly is a much cheaper check, too. :)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The local resolver warning needed to be moved at daemon start because it
was only show for the first container started anyways before having a
default value set.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Docker-DCO-1.1-Signed-off-by: William Henry <whenry@redhat.com> (github: ipbabble)
new file: contrib/man/man1/docker-attach.1
new file: contrib/man/man1/docker-build.1
new file: contrib/man/man1/docker-images.1
new file: contrib/man/man1/docker-info.1
new file: contrib/man/man1/docker-inspect.1
new file: contrib/man/man1/docker-rm.1
new file: contrib/man/man1/docker-rmi.1
new file: contrib/man/man1/docker-run.1
new file: contrib/man/man1/docker-tag.1
new file: contrib/man/man1/docker.1
This also includes some portability changes so that the package can be
imported with the top level runtime.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
* The default behavior is preserved
* This disables the use of the `TEST` environment variable in engine.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
The install script (on https://get.docker.io/) installs an APT sources.list
entry referencing an HTTPS repository, and takes care of installing the
apt-transport-https package. However, the Debian/Ubuntu specific installation
script (on https://get.docker.io/ubuntu) used an HTTPS repository but without
installing that package, causing the installation to fail on some platforms.
This will use HTTPS everywhere, and updates the documentation accordingly.
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
Docker-DCO-1.1-Signed-off-by: Jérôme Petazzoni <jerome@docker.com> (github: jpetazzo)
The variables that were defined at the top of the apparmor profile are best
pulled in via the <tunables/global> include.
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
Add 'pid' variable pointing to 'self' to allow parsing of profile to succeed
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
Encountered problems on 14.04 relating to signals between container
processes being blocked by apparmor. The base abstraction contains
appropriate rules to allow this communication.
Docker-DCO-1.1-Signed-off-by: Michael Brown <michael.brown@discourse.org> (github: Supermathie)
LUtimesNano and all other functions were implemented on pkg/system after
d6114c0da0.
Docker-DCO-1.1-Signed-off-by: Kato Kazuyoshi <kato.kazuyoshi@gmail.com> (github: kzys)
The wait at the end of cli integration script could end up failing if
the process had already exited. This was making it look like the tests
have failed.
This change fixes the problem.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes it possible to choose the graphdriver and the execdriver
which is going to be used for the cli integration tests.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes container and image removal in the tests run synchronously.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
'docker insert' is an old command which predates 'docker build'. We no
longer recommend using it, it is not actively maintained, and can be
replaced with the combination of 'docker build' and 'ADD'.
This removes the command from usage and documentation, and prints a
warning when it is called.
The command still works but it will be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* The commands are no longer listed or documented.
* The commands still work but print a deprecation warning.
* The commands should be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Such nodes could already be created by importing a tarball to a container; now
they can be created from within the container itself.
This gives non-privileged containers the mknod kernel capability, and modifies
their cgroup settings to allow creation of *any* node, not just whitelisted
ones. Use of such nodes is still controlled by the existing cgroup whitelist.
Docker-DCO-1.1-Signed-off-by: Kevin Wallace <kevin@pentabarf.net> (github: kevinwallace)
As explained in https://github.com/dotcloud/docker/issues/4979
--volumes-from fails with ENOFILE errors.
This is because the code tries to look at the "from" volume without
ensuring that it is mounted yet. We fix this by mounting the containers
before stating in it.
Also includes a regression test.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
For combing through logs, have an intro line with information about the
running instance of the docker daemon.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This also improves the logic around formatting the labels for selinux
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
There is a bug in the SELinux patch for the lxc execdriver, that
causes lxc containers to blow up whether or not SELinux is enabled.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
When the code attempts to set the ProcessLabel, it checks if SELinux Is
enabled. We have seen a case with some of our patches where the code
is fooled by the container to think that SELinux is not enabled. Calling
label.Init before setting up the rest of the container, tells the library that
SELinux is enabled and everything works fine.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
If a system is configured for SELinux but does not know about docker or
containers, then we want the transitions of the policy to work. Hard coding
the labels causes docker to break on older Fedora and RHEL systems
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This adds a bit of documentation for the `-a` flag for docker run.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
We currently drop the global lock while holding a per-device lock when
waiting for device removal, and then we re-aquire it when the sleep is done.
This is causing a AB-BA deadlock if anyone at the same time tries to do any
operation on that device like this:
thread A: thread B
grabs global lock
grabs device lock
releases global lock
sleeps
grabs global lock
blocks on device lock
wakes up
blocks on global lock
To trigger this you can for instance do:
ID=`docker run -d fedora sleep 5`
cd /var/lib/docker/devicemapper/mnt/$ID
docker wait $ID
docker rm $ID &
docker rm $ID
The unmount will fail due to the mount being busy thus causing the
timeout and the second rm will then trigger the deadlock.
We fix this by adding a lock ordering such that the device locks
are always grabbed before the global lock. This is safe since the
device lookups now have a separate lock.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Currently access to the Devices map is serialized by the main
DeviceSet lock, but we need to access it outside that lock, so we
add a separate lock for this and grab that everywhere we modify
or read the map.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This centralizes the lookup of devices so it is only done in one place.
This will be needed later when we change the locking for it.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We already have the info in most cases, no need to look this up multiple times.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
All the callers already have the info, no need for an extra lookup.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
There is no need to look this up again, we have it already in all callers.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Especially but not limited to:
- make BINDDIR= ... - for when you don't want a bind mount at all
- make DOCSPORT=9000 docs - for when you want a not-8000 docs port
- when we can't determine a branch name, we don't try to "docker build -t docker: ." anymore - we just "docker build -t docker ." (thus allowing Docker to assume ":latest")
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
When the code attempts to set the ProcessLabel, it checks if SELinux Is
enabled. We have seen a case with some of our patches where the code
is fooled by the container to think that SELinux is not enabled. Calling
label.Init before setting up the rest of the container, tells the library that
SELinux is enabled and everything works fine.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
If a system is configured for SELinux but does not know about docker or
containers, then we want the transitions of the policy to work. Hard coding
the labels causes docker to break on older Fedora and RHEL systems
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This way, we can use both `docker kill -s INT some_container` and `docker kill -s SIGINT some_container` and both will do nice things for us. :)
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Docker.io API has replaced the gravatar_email field with a
gravatar_url field instead.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Make sure the busybox image is ready to be used when running the cli
integration tests.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
so it's before "Mirrors" instead of "Docker and local DNS server
warnings"
Docker-DCO-1.1-Signed-off-by: Marc Abramowitz <msabramo@gmail.com> (github: msabramo)
trim the front of variables. Error if there are other spaces present.
Leave the value alone.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
match dock functionality, and not try to achieve shell-sourcing compatibility
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Added Adele Goldstine, Erna Schneider Hoover, Grace Hopper, Jean Bartik,
Jean E. Sammet, Karen Spärck Jones, Radia Perlman and Sophie Wilson.
Thanks to @jamtur01 for Sophie Kowalevski, Hypatia, Jane Goodall, Maria
Mayer, Rosalind Franklin, Gertrude Elion, Elizabeth Blackwell,
Marie-Jeanne de Lalande, Maria Kirch, Maria Ardinghelli, Jane Colden,
June Almeida, Mary Leakey, Lise Meitner, Johanna Mestorf.
Thanks to @xamebax for Françoise Barré-Sinoussi, Rachel Carson, Barbara
McClintock, Ada Yonath.
Docker-DCO-1.1-Signed-off-by: Johannes 'fish' Ziemke <github@freigeist.org> (github: discordianfish)
Fixes#4741
Right now volumes from expected a dir and not a file so when the drivers
tried to do the bind mount, the destination was a dir, not a file so it
fails to run.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Please do with this as you please (including rebasing and/or squashing it), especially under clause (c) of the DCO.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
The change in commit a9fa1a13c3
made us only deactivate devices that were mounted. Unfortunately
this made us not deactivate the base device. Which caused
us to not be able to deactivate the pool.
This fixes that by always just deactivating the base device.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If an admin mounts all file systems as -rshared (Default on RHEL and Fedora)
we see a scaling problem as the number of container increase.
Basically every new container needs to have it new mounts in /var/lib/docker
shared to all other containers, this ends up with us only able to scale to
around 100 containers, before the system slows down.
By simply bind mounting /var/lib/docker on its and then setting it private,
the scaling issue goes away.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
This implements cgroup.Apply() using the systemd apis.
We create a transient unit called "docker-$id.scope" that contains
the container processes. We also have a way to set unit specific
properties, currently only defining the Slice to put the
scope in.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This is a conversion of sd_booted() from libsystemd to go and checks
if the system was booted with systemd.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We need this to do systemd API calls.
We also add the static_build tag to make godbus not use
os/user which is problematic for static builds.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
cgroups.procs moves all the threads of the process, and "tasks" just
the one thread. I believe there is a risk that we move the main thread,
but then we accidentally fork off one of the other threads if the go
scheduler randomly switched to another thread. So, it seems safer (and
more correct) to use cgroups.procs.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This leaves only the generic cgroup helper functions in cgroups.go and
will allow easy implementations of other cgroup managers.
This also wires up the call to Cleanup the cgroup which was missing
before.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
In order to handle special configuration for different drivers we
make the Config field a map to string array. This lets
us use it for lxc, by using the "lxc" key for those, and we can
later extend it easily for other backend-specific options.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This fixes the following, which I've been seeing on all my machines for as long as I can remember:
--- FAIL: TestOnlyLoopbackExistsWhenUsingDisableNetworkOption (0.36 seconds)
container_test.go:1597: Wrong interface count in test container: expected [*: lo], got [1: lo 2: sit0]
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
docker will run the process(es) within the container with an SELinux label and will label
all of the content within the container with mount label. Any temporary file systems
created within the container need to be mounted with the same mount label.
The user can override the process label by specifying
-Z With a string of space separated options.
-Z "user=unconfined_u role=unconfined_r type=unconfined_t level=s0"
Would cause the process label to run with unconfined_u:unconfined_r:unconfined_t:s0"
By default the processes will run execute within the container as svirt_lxc_net_t.
All of the content in the container as svirt_sandbox_file_t.
The process mcs level is based of the PID of the docker process that is creating the container.
If you run the container in --priv mode, the labeling will be disabled.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
We need to change it to read only at the very end so that bound,
copy dev nodes and other ops do not fail.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
When s.FinishedAt is zero, the since time exit in docker ps doesn't display correct time.
For example
```
Exited (0) 292.471209 years ago
```
This patch fixes the since time exit to display nothing if s.FinishedAt is zero.
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
This also adds an enabled field to the types so that they
can be easily toggled.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Right now shutdown is looping over *all* devicemapper
devices and actively deactivating them, this is pretty
slow if you have a lot of non-active containers. We
instead only deactivate the devices that are mounted.
We also do the shutdown unmount using MNT_DETACH which
forces the unmount in the global namespace, even if it
is busy because of some container having it mounted.
This means the device will be freed when that container
exits.
Also, we move the call to waitClose to deactivateDevice
because all callers of any of them call both anyway.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
TestCreateStartRestartStopStartKillRm was failing because stop has been
changed to not kill containers.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
when pushing or saving layers, report sizes for validation. And ensure
that the files written are sync'ed.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
In #4740, the apt-key call in docs is changed to use the keyserver port 80 instead of
port 11371, as the previous call would fail with a restrictive firewall or proxy.
This commit extends the change to all apt-key calls in the repository.
Docker-DCO-1.1-Signed-off-by: Viktor Vojnovski <vojnovski@gmail.com> (github: vojnovski)
Fixes#4021
Moved to debian because the redis installed in ubuntu is really old
and does not support args via the cli.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Also renames --since-id/--before-id to --since/--before and add errors
on non-existent containers.
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
Default to the same build behavior, but allow a go build tag to disable
building of the btrfs graphdriver
go build -tags no_btrfs' ...
$ go build
$ objdump -S docker | grep btrfs | wc -l
194
$ go build -tags no_btrfs
$ objdump -S docker | grep btrfs | wc -l
1
# that is a comment ;-)
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Enable build tags for all the graphdrivers to be excludable.
As an example:
```
$ go build
$ ls -l docker
-rwxr-xr-x 1 vbatts vbatts 18400158 Mar 14 14:22 docker*
$ go build -tags "exclude_graphdriver_aufs exclude_graphdriver_vfs exclude_graphdriver_devicemapper"
$ ls -l docker
-rwxr-xr-x 1 vbatts vbatts 17467068 Mar 14 14:22 docker*
```
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Add a failing test case for an issue where docker is not creating a loopback device if networking is dissabled.
Docker-DCO-1.1-Signed-off-by: Timothy Hobbs <timothyhobbs@seznam.cz> (github: https://github.com/timthelion)
Someone probably got really used to typing er on the end of contain :)
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
The Capabilities field on libcontainer is actually used as a mask.
Rename the field so that this is more clear.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
Include instructions to install Docker from Amazon's Software Repository on new AMI 2014.03 (Release Candidate)
Docker-DCO-1.1-Signed-off-by: Sebastien Stormacq <sebastien.stormacq@gmail.com> (github: sebsto)
Since we're not not mounting anything but the base filesystem outside
the container we no longer need the separate bind mount at
/var/lib/docker/container/$id/root in order to see the base filesystem
without extra mounts. So, we drop this and mount (again) the container
root directly at the real basefs mountpoint.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This moves the bind mounts like /.dockerinit, /etc/hostname, volumes,
etc into the container namespace, by setting them up using lxc.
This is useful to avoid littering the global namespace with a lot of
mounts that are internal to each container and are not generally
needed on the outside. In particular, it seems that having a lot of
mounts is problematic wrt scaling to a lot of containers on systems
where the root filesystem is mounted --rshared.
Note that the "private" option is only supported by the native driver, as
lxc doesn't support setting this. This is not a huge problem, but it does
mean that some mounts are unnecessarily shared inside the container if you're
using the lxc driver.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
These were found using `git grep -nE '[^-a-zA-Z0-9<>]-[a-zA-Z0-9]{2}'` (fair warning: _many_ false positives there).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This commit updates the Apache license boilerplate with actual information. The Apache license appendix (designed to be removed before publication) states:
```
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!)...
```
Additionally, the copyright year was not included. Copyright notices must reflect the current year. This commit updates the listed year to 2014.
see: http://www.copyright.gov/circs/circ01.pdf for more info
Docker-DCO-1.1-Signed-off-by: Phillip Alexander <git@phillipalexander.io> (github: phillipalexander)
commit baa70e9751 duplicates
the description of --mtu.
This patch removes the duplicated description.
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
This makes `--cidfile` clean up empty container ID files. These are
left behind when creating the container fails.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes Docker retry to retrieve the JSON metadata for the layers.
Docker will make 5 attempts to retrieve the metadata before failing and
it will increase the delay between attempts after each failed attempt.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Fix docs and help messages of --iptables and --ip-forward to describe the true case behaviour
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
roll version and standalone information into the _ping. And to support
Headers they are checked after the JSON is loaded (if there is anything
to load). To stay backwards compatible, if the _ping contents are not
able to unmarshal to RegistryInfo, do not stop, but continue with the
same behavior.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This can't be in execdriver (dependency loop) but should not be
hardcoded inside runtime.go either. So we put it in a subpackage.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
For a pull-only, static registry, there only a couple of headers that
need to be optional (that are presently required.
* X-Docker-Registry-Version
* X-Docker-Size
* X-Docker-Endpoints
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Since docker uses cookiejar it doesn't need to manage cookies manually
anymore.
Managing cookie was duplicating it.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
This makes mkimage-debootstrap upgrade packages after retrieving
updated lists of packages.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
```
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
```
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
Use the DOCKER_RAMDISK env var to tell the native driver not to use
a pivot root when setting up the rootfs of a container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This removes the dbus entry from the apparmor profile Docker creates.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
We've seen some cases in the wild where waiting for unmount/deactivate
of devmapper devices taking a long time (several seconds). So, we increase
the sleeps to 10 seconds before we timeout. For instance:
https://github.com/dotcloud/docker/issues/4389
But, in order to not keep other processes blocked we unlock the global
dm lock while waiting to allow other devices to continue working.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We currently use a global lock to protect global data (like the
Devices map) as well as device data itself and access to
(non-threadsafe) libdevmapper.
This commit also adds a per-device lock, which will allow per-device
operations to temporarily release the global lock while e.g. waiting.
The per-device lock will make sure that nothing else accesses that
device while we're operating on it.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We've seen situations where removal of "ID-init" failed during
container deletion (EBUSY), after removal of "ID" has succeeded. This
caused the container delete operation to fail, and on the next delete
attempt the removal of "ID" failed immediately with "does not exist".
Ideally we should not fail the ID-init removal, but its also non-ideal
to allow a state where the container is half-removed and we cannot
make progress deleting the container. So, we silently ignore not-exist
errors on device removal.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We can't keep file descriptors without close-on-exec except with
syscall.ForkLock held, as otherwise they could leak by accident into
other children from forks in other threads.
Instead we just use Cmd.ExtraFiles which handles all this for us.
This fixes https://github.com/dotcloud/docker/issues/4493
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
* Updated pre-reqs for 0.9.
* Fixed a couple of docker to Docker.
* Fixed the Docker build example to be correct.
* Reformatted a bunch of paragraphs
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
This removes three warnings in the integration tests:
Warning: '-viz' is deprecated, it will be removed soon. See usage.
Warning: '-tree' is deprecated, it will be removed soon. See usage.
Warning: '-cidfile' is deprecated, it will be removed soon. See usage.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This is a package for generic system calls etc that for some reason
is not yet supported by "syscall", or where it is different enough
for the different ports to need portability wrappers.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Now that we unmount all the mounts from the global namespace we can
use a private namespace rather than a slave one (as we have no need
for unmounts of inherited global mounts to propagate into the
container).
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
In api/client.go updated:
1. Made api == API
2. Restated Docker daemon connection error to be clearer.
3. Changed use of "Impossible" in error messages.
4. Removed extra space in restart error message.
5. Fixed capitalization in three error messages.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Instead of keeping all the old mounts in the container namespace and
just using subtree as root we pivot_root so that the actual root in
the namespace is the root we want, and then we unmount the previous
mounts.
This has multiple advantages:
* The namespace mount tree is smaller (in the kernel)
* If you break out of the chroot you could previously access the host
filesystem. Now the host filesystem is fully invisible to the namespace.
* We get rid of all unrelated mounts from the parent namespace, which means
we don't hog these. This is important if we later switch to MS_PRIVATE instead
of MS_SLAVE as otherwise these mounts would be impossible to unmount from the
parent namespace.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Hairpin NAT is currently done by passing through the docker server. If
two containers on the same box try to access each other through exposed
ports and using the host IP the current iptables rules will not match the
DNAT and thus the traffic goes to 'docker -d'
This change drops the restriction that DNAT traffic must not originate
from docker0. It should be safe to drop this restriction because the
DOCKER chain is already gated by jumps that check for the destination
address to be a local address.
Docker-DCO-1.1-Signed-off-by: Darren Shepherd <darren.s.shepherd@gmail.com> (github: ibuildthecloud)
This removes the incomplete symlink handling from engine.go and it adds
it one place in docker.go.
It also enables handling symlinks for TMPDIR.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This makes it possible to pass the rest of the testsuite without aufs in the kernel.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
The sqlite3 version in fedora (3.8) returns a different error string in the unique constraints
failure case than the one in hack/ (3.7). This updates the check to detect both, fixing
one integration check failure on Fedora.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This fixes a bug that I encountered when using socket activation with
docker 0.8.1. When running the first `docker run` it would return:
"create: command not found".
The root cause was the socket activation code path was starting to
listen before the "initserver" job had finished. This meant that the
"create" handler hand't been registered yet leading to the command not
found error.
In log format it looks like this:
```
[/var/lib/docker|9d2e78e9] +job initserver()
2014/03/01 04:05:35 Listening for HTTP on fd ()
[/var/lib/docker|0d71c177] +job create()
create: command not found
[/var/lib/docker|0d71c177] -job create()
[/var/lib/docker|0d71c177] +job acceptconnections()
[/var/lib/docker|0d71c177] -job initserver() = OK (0)
```
To fix the issue select on the activationLock and block until the
"acceptconnections" job has ran.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
Added emphasis of https for OAuth interactions.
Updated example URIs to use HTTPS
Included redirect hostname on authorization page.
Docker-DCO-1.1-Signed-off-by: Josh hawn <josh.hawn@docker.com> (github: jlhawn)
Remove logging for now because it is complicating things
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
OAuth docs:
documented the OAuth authorization flow and how to register your application
Account docs:
documented getting/updating user profile data
documented getting/updating user email data
Docker-DCO-1.1-Signed-off-by: Josh hawn <josh.hawn@docker.com> (github: jlhawn)
It is independent of any particular driver, but likely used by
multiple execdrivers. Also, pkg/... is not to have any links to
docker, which this terminal setup does.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
Refactor integration tests to remove special cases in the creation of
test engines. All test engines are now created through newTestEngine.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This allows selective loading of commands, and paves the way to dynamic
plugins.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Since these functions are indepenent of lxc, and could be used by
other drivers.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This will add support for Tanglu, a Debian based Linux-distribution.
Docker-DCO-1.1-Signed-off-by: Matthias Klumpp <matthias@tenstral.net> (github: Ximion)
This removes the Vagrantfile and updates the documentation to remove
the steps which explain how to install Docker in a VM via Vagrant.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This reverts commit 80db9a918337c4ae80ffa9a001da13bd24e848c8.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This is a minimal version of raw cgroup support for libcontainer.
It has only enough for what docker needs, and it has no support
for systemd yet.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Pass the container's command via args
Remove execin function and just look for an
existing nspid file to join the namespace
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
If you are using jumbo frames the host side of the veth was being set to
1500. Docker would set the MTU of the container side of the veth to 9001.
This would lead to a situation in which the two sides of the veth had
different MTU sizes causing issues in network traffic.
Docker-DCO-1.1-Signed-off-by: Darren Shepherd <darren.s.shepherd@gmail.com> (github: ibuildthecloud)
This makes the JSON streams a _lot_ easier to parse in less well-baked JSON parsers, and no less so in better ones.
Line-based JSON streams are very, very common, where simply chunk-based is not very common at all.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This changes the way onbuild works:
- forbids the chaining of onbuild instructions
- forbids the use of `onbuild from`
- forbids the use of `onbuild maintainer`
It also makes docker throw errors when encountering such triggers when
executing the triggers during `FROM`.
Three tests have been added:
- ensure that chained onbuild (`onbuild onbuild`) is forbidden
- ensure that `onbuild from` is forbidden
- ensure that `onbuild maintainer` is forbidden
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This explains how to fix the DNS warnings on Ubuntu and why they're
shown.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
If a file has a security.capability set, we push this to the tar file.
This is important to handle in e.g. layer files or when copying files
to containers, as some distros (e.g. Fedora) use capability bits as
a more finegrained version of setuid bits, and thus if the capabilites
are stripped (and setuid is not set) the binaries will fail to work.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This changes two URLs from http to https and it fixes a Dockerfile to
stop skipping certificate validation. It also adds the ca-certificates
package to that Dockerfile example.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
If coverpkg is missing on `go test` command, only the current package
will be covered. That's the case of unit tests. For integration tests
we need to explicitly declare each package.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
.. to make it even more clear that this env variables are there because of the --link option.
Docker-DCO-1.1-Signed-off-by: Matthias Kühnle <git.nivoc@neverbox.com> (github: float64)
Removed the "test now..." b/c the code example is only about inspection
of env-variables.
Test follows in the next section.
Docker-DCO-1.1-Signed-off-by: Matthias Kühnle <git.nivoc@neverbox.com> (github: float64)
Clarified that the env variables here are an example output of env. The user should not set them to the example values.
Docker-DCO-1.1-Signed-off-by: Matthias Kühnle <git.nivoc@neverbox.com> (github: float64)
In commit 3dfc910d77 we changed from
syscall.Chmod() to os.Chmod(), but these take a different form of the
Mode argument. The sycall one takes the raw linux form, wheras
os.Chmod takes the os.FileMode form, and they differ for the higher
bits (setuid, setgid, etc). The raw tar header uses a form which
is compatible with the syscalls, but not the go calls.
We fix this by using hdr.FileInfo() which properly converts the mode
to what go expects.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
like the storage-driver flag, this implements a flag for choosing the
execdriver to be used, defaulting to lxc.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This changes the local DNS resolver warning to explain what the
warning is about and why the default external DNS server is used.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Files in the .wh..wh.plnk directory are ignored, but other files
inside the tarfile can be hardlinks to these files. This is not
something that normally happens, as on aufs unmount such files are
supposed to be dropped via the "auplink" too, yet images on the index
(such as shipyard/shipyard, e.g. layer
f73c835af6d58b6fc827b400569f79a8f28e54f5bb732be063e1aacefbc374d0)
contains such files.
We handle these by extracting these files to a temporary directory
and resolve such hardlinks via the temporary files.
This fixes https://github.com/dotcloud/docker/issues/3884
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Stopping the container will typicall cause it to unmount, to keep it mounted
over the stop/start cycle we aquire a temporary reference to it during this time.
This helps with https://github.com/dotcloud/docker/issues/4036
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Fix cp api to return a 404 notfound if container doesn't exist.
Fixes#4119.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
This breaks the dependency from the remote API implementation to the
internal representation of a container. Instead it uses its own partial
representation of a container, with only required fields.
* This preserves reverse-compatibility with all past implementations of the remote API.
* This clarifies which fields are guaranteed to be present in a response
A docker remote api server *may* return more fields in a Container
object, but their presence and semantics are not guaranteed and should
not be relied upon by client implementations.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This helps clean up the container file and move volumes into
one location. We currently cannot move volumes to a sub pkg
because they depend on Container and also modify fields on the
container.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
All archive that are created from somewhere generally have to be closed, because
at some point there is a file or a pipe or something that backs them. So, we
make archive.Archive a ReadCloser. However, code consuming archives does not
typically close them so we add an archive.ArchiveReader and use that when we're
only reading.
We then change all the Tar/Archive places to create ReadClosers, and to properly
close them everywhere.
As an added bonus we can use ReadCloserWrapper rather than EofReader in several places,
which is good as EofReader doesn't always work right. For instance, many compression
schemes like gzip knows it is EOF before having read the EOF from the stream, so the
EofCloser never sees an EOF.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
CompressStream() now always returns a stream that is closable, and it never
closes the underlying writer. TarFilter() makes sure the decompressed stream
is closed at the and, as well as the PipeWriter.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Various kinds of decompressed streams are really ReadClosers. For instance
gzip.NewReader() is, and the one returned from CmdStream is changed to be
because it returns a PipeReader which is a ReadCloser.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This stops docker from accepting tcp:// as a valid bind address.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
* master: (64 commits)
Move the canonical run configuration objects to a sub-package
Remove useless code in client implementation of 'run'.
pkg/opts: a collection of custom value parsers implementing flag.Value
Move api-specific code to the api package
Fix the tests, too
Fix the one spot I missed dockerversion
fix underline/heading
New package `nat`: utilities for manipulating the text description of network ports.
rewrite the PostgreSQL example using a Dockerfile, and add details to it
Move even more stuff into dockerversion
fix underline/heading
Move docker version introspection to a sub-package.
add port forwarding notes for mac/boot2docker docs
Update remote_api_client_libraries.rst
Avoid extra mount/unmount during container registration
add a little more information about the docker run -P option
lxc: Drop NET_ADMIN capability in non-privileged containers
devmapper: Remove directory when removing devicemapper device
add a little info on upgrading
point out that ENV DEBIAN_FRONTEND will persist, so its not recommended
...
CmdRun() calls first run() and then wait() to wait for it to exit,
then it runs commit(). The run command will mount the container and
the container exiting will unmount it. Then the commit will
immediately mount it again to do a diff.
This seems minor, but this is actually problematic, as the Get/Put
pair will create a spurious mount/unmount cycle that is not needed and
slows things down. Additionally it will create a supurious
devicemapper activate/deactivate cycle that causes races with udev as
seen in https://github.com/dotcloud/docker/issues/4036.
To ensure that we only unmount once we split up run() into create()
and run() and reference the mount until after the commit().
With this change docker build on devicemapper is now race-free, and
slightly faster.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
* Config is now runconfig.Config
* HostConfig is now runconfig.HostConfig
* MergeConfig is now runconfig.Merge
* CompareConfig is now runconfig.Compare
* ParseRun is now runconfig.Parse
* ContainerConfigFromJob is now runconfig.ContainerConfigFromJob
* ContainerHostConfigFromJob is now runconfig.ContainerHostConfigFromJob
This facilitates refactoring commands.go and shrinks the core.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
Runtime.Register() called driver.Get()/Put() in order to read back the
basefs of the container. However, this is not needed, as the basefs
is read during container.Mount() anyway, and basefs is only valid
while mounted (and all current calls satisfy this).
This seems minor, but this is actually problematic, as the Get/Put
pair will create a spurious mount/unmount cycle that is not needed and
slows things down. Additionally it will create a supurious
devicemapper activate/deactivate cycle that causes races with udev as
seen in https://github.com/dotcloud/docker/issues/4036.
With this change devicemapper is now race-free, and container startup
is slightly faster.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We no longer pass "pool" anywhere that uses byHash() per the last
commit, so we can now remove this hack.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Shutdown contains debug warnings like:
[debug] deviceset.go:699 [deviceset docker-0:33-17945897] waitRemove(/dev/mapper/docker-0:33-17945897-pool)
[debug] deviceset.go:380 libdevmapper(3): libdm-common.c:552 (-1) Device /dev/mapper/docker-0:33-17945897-pool not found
This is because shutdown is using removeDeviceAndWait() to remove the pool device and the
wait part fails because the pool is gone.
We fix this by adding a pool specific removal function which avoids all the trickiness of the
normal remove.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
With this capability set the container can e.g. change the ip address
of his devices to that of another container on the docker0 bridge. In
a quick test I was able to listen to a port on a different ip than the
one docker assigned me, but was not able to hijack an open port
redirection that another container had open. Maybe its possible with
some more knowledge of networking though.
Anyway, network setup is meant to be handled by docker, not the apps,
so I believe denying this is generally in the spirit of docker, and
it closes down potential security issues.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If /dev/loop-control exists on the system running the test then
ioctlLoopCtlGetFree() will be called, but if not it won't. It does
not exist in the standard docker build environment, so the tests
currently require this to not be called. This makes it instead
optional, allowing the tests to run on e.g. Fedora.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We're currently leaving around lots of empty directories in
/var/lib/docker/devicemapper/mnt/ for removed images and containers.
Fix this by removing the directory when the device is removed.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
1. All titles are listed by simple platform names apart from Windows' "Installing Docker On Windows". Changed this to "Windows" to match the rest.
2. Some articles' description (and title) information does not match the majority. Modified them to match the rest (i.e. Please note this project is currently under heavy development. It should not be used in production.)
3. Removed "Linux" from Gentoo & Ubuntu descriptions.
This way, packagers can set GIT_DIR appropriately if they'd prefer to not have ".git" inside their working directory.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This also adds a new "AUTO_GOPATH" environment variable that will create an appropriate GOPATH as part of the build process.
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
This makes the device mapper not zero out blocks allocated on the
thinp device. This is safe in our use case, as we access the device
via a filesystem that doesn't leak any uninitialized data to userspace.
This partially helps with https://github.com/dotcloud/docker/issues/3280
and should generally improve preformance on the devicemapper backend.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
I volunteered for pkg/systemd MAINTAINER and there were no objections
during the #docker-dev meeting. For context I wrote most of the stuff in
here and wrote the dependent calls in api.go. Plus, I actively test the
code via CoreOS.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
For some reason we seem to get transient EBUSY when removing
thinp devices, which prohibit removing containers. When
this happens we retry a few times which seems to fix the
issue for me.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
This makes sure the device is removed just like in deactivateDevice.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
We already have some kind of refcounting in DeviceSet, this fleshes
it out to allow it to completely subsume the refcounting in
devmapper.Driver.
This allows us to drop the double refcounting, and the locking inside
devmapper.Driver. This, in particular the locking simplification will
make it easier in the future to parallelize the device mapper.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Simple typo, "ID" should be "Id". This is causing the images response
to not have IDs in it.
Docker-DCO-1.1-Signed-off-by: Darren Shepherd <darren.s.shepherd@gmail.com> (github: ibuildthecloud)
This adds a function that calls the lowlevel removeDevice
and then waits for it to finish.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
"Remove" is a bit overloaded, as it is also what deactivating a
device mapper device is called. Using "delete" is more clear here.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
If networking is disabled, but then pipework is used later to add nics, the network still doesn't function. Using flags=up for empty networking fixes this.
Docker-DCO-1.1-Signed-off-by: James DeFelice <james.defelice@ishisystems.com> (github: jdef)
In 7fb55f7725 the DCO lost the grant so
change the title back to just DCO.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
2014-01-28 13:50:03 -08:00
863 changed files with 75951 additions and 41377 deletions
# sometimes we have upstream master already as origin/master (PRs), but other times we don't, so let's just make sure we have a completely unambiguous way to specify "upstream master" from here out
# but if it's a PR against non-master, we need that upstream branch instead :)
* Use the net `--net` flag to allow advanced network configuration such as host networking so that containers can use the host's network interfaces
* Add a ping endpoint to the Remote API to do healthchecks of your docker daemon
* Logs can now be returned with an optional timestamp
* Docker now works with registries that support SHA-512
* Multiple registry endpoints are supported to allow registry mirrors
## 0.10.0 (2014-04-08)
#### Builder
- Fix printing multiple messages on a single line. Fixes broken output during builds.
- Follow symlinks inside container's root for ADD build instructions.
- Fix EXPOSE caching.
#### Documentation
- Add the new options of `docker ps` to the documentation.
- Add the options of `docker restart` to the documentation.
- Update daemon docs and help messages for --iptables and --ip-forward.
- Updated apt-cacher-ng docs example.
- Remove duplicate description of --mtu from docs.
- Add missing -t and -v for `docker images` to the docs.
- Add fixes to the cli docs.
- Update libcontainer docs.
- Update images in docs to remove references to AUFS and LXC.
- Update the nodejs_web_app in the docs to use the new epel RPM address.
- Fix external link on security of containers.
- Update remote API docs.
- Add image size to history docs.
- Be explicit about binding to all interfaces in redis example.
- Document DisableNetwork flag in the 1.10 remote api.
- Document that `--lxc-conf` is lxc only.
- Add chef usage documentation.
- Add example for an image with multiple for `docker load`.
- Explain what `docker run -a` does in the docs.
#### Contrib
- Add variable for DOCKER_LOGFILE to sysvinit and use append instead of overwrite in opening the logfile.
- Fix init script cgroup mounting workarounds to be more similar to cgroupfs-mount and thus work properly.
- Remove inotifywait hack from the upstart host-integration example because it's not necessary any more.
- Add check-config script to contrib.
- Fix fish shell completion.
#### Hack
* Clean up "go test" output from "make test" to be much more readable/scannable.
* Excluse more "definitely not unit tested Go source code" directories from hack/make/test.
+ Generate md5 and sha256 hashes when building, and upload them via hack/release.sh.
- Include contributed completions in Ubuntu PPA.
+ Add cli integration tests.
* Add tweaks to the hack scripts to make them simpler.
#### Remote API
+ Add TLS auth support for API.
* Move git clone from daemon to client.
- Fix content-type detection in docker cp.
* Split API into 2 go packages.
#### Runtime
* Support hairpin NAT without going through Docker server.
- devicemapper: succeed immediately when removing non-existing devices.
- devicemapper: improve handling of devicemapper devices (add per device lock, increase sleep time and unlock while sleeping).
- devicemapper: increase timeout in waitClose to 10 seconds.
- devicemapper: ensure we shut down thin pool cleanly.
- devicemapper: pass info, rather than hash to activateDeviceIfNeeded, deactivateDevice, setInitialized, deleteDevice.
- devicemapper: avoid AB-BA deadlock.
- devicemapper: make shutdown better/faster.
- improve alpha sorting in mflag.
- Remove manual http cookie management because the cookiejar is being used.
- Use BSD raw mode on Darwin. Fixes nano, tmux and others.
- Add FreeBSD support for the client.
- Merge auth package into registry.
- Add deprecation warning for -t on `docker pull`.
- Remove goroutine leak on error.
- Update parseLxcInfo to comply with new lxc1.0 format.
- Fix attach exit on darwin.
- Improve deprecation message.
- Retry to retrieve the layer metadata up to 5 times for `docker pull`.
- Only unshare the mount namespace for execin.
- Merge existing config when committing.
- Disable daemon startup timeout.
- Fix issue #4681: add loopback interface when networking is disabled.
- Add failing test case for issue #4681.
- Send SIGTERM to child, instead of SIGKILL.
- Show the driver and the kernel version in `docker info` even when not in debug mode.
- Always symlink /dev/ptmx for libcontainer. This fixes console related problems.
- Fix issue caused by the absence of /etc/apparmor.d.
- Don't leave empty cidFile behind when failing to create the container.
- Mount cgroups automatically if they're not mounted already.
- Use mock for search tests.
- Update to double-dash everywhere.
- Move .dockerenv parsing to lxc driver.
- Move all bind-mounts in the container inside the namespace.
- Don't use separate bind mount for container.
- Always symlink /dev/ptmx for libcontainer.
- Don't kill by pid for other drivers.
- Add initial logging to libcontainer.
* Sort by port in `docker ps`.
- Move networking drivers into runtime top level package.
+ Add --no-prune to `docker rmi`.
+ Add time since exit in `docker ps`.
- graphdriver: add build tags.
- Prevent allocation of previously allocated ports & prevent improve port allocation.
* Add support for --since/--before in `docker ps`.
- Clean up container stop.
+ Add support for configurable dns search domains.
- Add support for relative WORKDIR instructions.
- Add --output flag for docker save.
- Remove duplication of DNS entries in config merging.
- Add cpuset.cpus to cgroups and native driver options.
- Remove docker-ci.
- Promote btrfs. btrfs is no longer considered experimental.
- Add --input flag to `docker load`.
- Return error when existing bridge doesn't match IP address.
- Strip comments before parsing line continuations to avoid interpreting instructions as comments.
- Fix TestOnlyLoopbackExistsWhenUsingDisableNetworkOption to ignore "DOWN" interfaces.
- Add systemd implementation of cgroups and make containers show up as systemd units.
- Fix commit and import when no repository is specified.
- Remount /var/lib/docker as --private to fix scaling issue.
- Use the environment's proxy when pinging the remote registry.
- Reduce error level from harmless errors.
* Allow --volumes-from to be individual files.
- Fix expanding buffer in StdCopy.
- Set error regardless of attach or stdin. This fixes #3364.
- Add support for --env-file to load environment variables from files.
- Symlink /etc/mtab and /proc/mounts.
- Allow pushing a single tag.
- Shut down containers cleanly at shutdown and wait forever for the containers to shut down. This makes container shutdown on daemon shutdown work properly via SIGTERM.
- Don't throw error when starting an already running container.
- Fix dynamic port allocation limit.
- remove setupDev from libcontainer.
- Add API version to `docker version`.
- Return correct exit code when receiving signal and make SIGQUIT quit without cleanup.
- Fix --volumes-from mount failure.
- Allow non-privileged containers to create device nodes.
- Skip login tests because of external dependency on a hosted service.
- Deprecate `docker images --tree` and `docker images --viz`.
- Deprecate `docker insert`.
- Include base abstraction for apparmor. This fixes some apparmor related problems on Ubuntu 14.04.
- Add specific error message when hitting 401 over HTTP on push.
- Fix absolute volume check.
- Remove volumes-from from the config.
- Move DNS options to hostconfig.
- Update the apparmor profile for libcontainer.
- Add deprecation notice for `docker commit -run`.
## 0.9.1 (2014-03-24)
#### Builder
- Fix printing multiple messages on a single line. Fixes broken output during builds.
#### Documentation
- Fix external link on security of containers.
#### Contrib
- Fix init script cgroup mounting workarounds to be more similar to cgroupfs-mount and thus work properly.
- Add variable for DOCKER_LOGFILE to sysvinit and use append instead of overwrite in opening the logfile.
#### Hack
- Generate md5 and sha256 hashes when building, and upload them via hack/release.sh.
#### Remote API
- Fix content-type detection in `docker cp`.
#### Runtime
- Use BSD raw mode on Darwin. Fixes nano, tmux and others.
- Only unshare the mount namespace for execin.
- Retry to retrieve the layer metadata up to 5 times for `docker pull`.
- Merge existing config when committing.
- Fix panic in monitor.
- Disable daemon startup timeout.
- Fix issue #4681: add loopback interface when networking is disabled.
- Add failing test case for issue #4681.
- Send SIGTERM to child, instead of SIGKILL.
- Show the driver and the kernel version in `docker info` even when not in debug mode.
- Always symlink /dev/ptmx for libcontainer. This fixes console related problems.
- Fix issue caused by the absence of /etc/apparmor.d.
- Don't leave empty cidFile behind when failing to create the container.
- Improve deprecation message.
- Fix attach exit on darwin.
- devicemapper: improve handling of devicemapper devices (add per device lock, increase sleep time, unlock while sleeping).
- devicemapper: succeed immediately when removing non-existing devices.
- devicemapper: increase timeout in waitClose to 10 seconds.
- Remove goroutine leak on error.
- Update parseLxcInfo to comply with new lxc1.0 format.
## 0.9.0 (2014-03-10)
#### Builder
- Avoid extra mount/unmount during build. This fixes mount/unmount related errors during build.
- Add error to docker build --rm. This adds missing error handling.
- Forbid chained onbuild, `onbuild from` and `onbuild maintainer` triggers.
- Make `--rm` the default for `docker build`.
#### Documentation
- Download the docker client binary for Mac over https.
- Update the titles of the install instructions & descriptions.
* Add instructions for upgrading boot2docker.
* Add port forwarding example in OS X install docs.
- Attempt to disentangle repository and registry.
- Update docs to explain more about `docker ps`.
- Update sshd example to use a Dockerfile.
- Rework some examples, including the Python examples.
- Update docs to include instructions for a container's lifecycle.
- Update docs documentation to discuss the docs branch.
- Don't skip cert check for an example & use HTTPS.
- Bring back the memory and swap accounting section which was lost when the kernel page was removed.
- Explain DNS warnings and how to fix them on systems running and using a local nameserver.
#### Contrib
- Add Tanglu support for mkimage-debootstrap.
- Add SteamOS support for mkimage-debootstrap.
#### Hack
- Get package coverage when running integration tests.
- Remove the Vagrantfile. This is being replaced with boot2docker.
- Fix tests on systems where aufs isn't available.
- Update packaging instructions and remove the dependency on lxc.
#### Remote API
* Move code specific to the API to the api package.
- Fix header content type for the API. Makes all endpoints use proper content type.
- Fix registry auth & remove ping calls from CmdPush and CmdPull.
- Add newlines to the JSON stream functions.
#### Runtime
* Do not ping the registry from the CLI. All requests to registres flow through the daemon.
- Check for nil information return in the lxc driver. This fixes panics with older lxc versions.
- Devicemapper: cleanups and fix for unmount. Fixes two problems which were causing unmount to fail intermittently.
- Devicemapper: remove directory when removing device. Directories don't get left behind when removing the device.
* Devicemapper: enable skip_block_zeroing. Improves performance by not zeroing blocks.
- Ensure docker cp stream is closed properly. Fixes problems with files not being copied by `docker cp`.
- Stop making `tcp://` default to `127.0.0.1:4243` and remove the default port for tcp.
- Fix `--run` in `docker commit`. This makes `docker commit --run` work again.
- Fix custom bridge related options. This makes custom bridges work again.
+ Mount-bind the PTY as container console. This allows tmux/screen to run.
+ Add the pure Go libcontainer library to make it possible to run containers using only features of the Linux kernel.
+ Add native exec driver which uses libcontainer and make it the default exec driver.
- Add support for handling extended attributes in archives.
* Set the container MTU to be the same as the host MTU.
+ Add simple sha256 checksums for layers to speed up `docker push`.
* Improve kernel version parsing.
* Allow flag grouping (`docker run -it`).
- Remove chroot exec driver.
- Fix divide by zero to fix panic.
- Rewrite `docker rmi`.
- Fix docker info with lxc 1.0.0.
- Fix fedora tty with apparmor.
* Don't always append env vars, replace defaults with vars from config.
* Fix a goroutine leak.
* Switch to Go 1.2.1.
- Fix unique constraint error checks.
* Handle symlinks for Docker's data directory and for TMPDIR.
- Add deprecation warnings for flags (-flag is deprecated in favor of --flag)
- Add apparmor profile for the native execution driver.
* Move system specific code from archive to pkg/system.
- Fix duplicate signal for `docker run -i -t` (issue #3336).
- Return correct process pid for lxc.
- Add a -G option to specify the group which unix sockets belong to.
+ Add `-f` flag to `docker rm` to force removal of running containers.
+ Kill ghost containers and restart all ghost containers when the docker daemon restarts.
+ Add `DOCKER_RAMDISK` environment variable to make Docker work when the root is on a ramdisk.
## 0.8.1 (2014-02-18)
#### Builder
- Avoid extra mount/unmount during build. This removes an unneeded mount/unmount operation which was causing problems with devicemapper
- Fix regression with ADD of tar files. This stops Docker from decompressing tarballs added via ADD from the local file system
- Add error to `docker build --rm`. This adds a missing error check to ensure failures to remove containers are detected and reported
#### Documentation
* Update issue filing instructions
* Warn against the use of symlinks for Docker's storage folder
* Replace the Firefox example with an IceWeasel example
* Rewrite the PostgresSQL example using a Dockerfile and add more details to it
* Improve the OS X documentation
#### Remote API
- Fix broken images API for version less than 1.7
- Use the right encoding for all API endpoints which return JSON
- Move remote api client to api/
- Queue calls to the API using generic socket wait
#### Runtime
- Fix the use of custom settings for bridges and custom bridges
- Refactor the devicemapper code to avoid many mount/unmount race conditions and failures
- Remove two panics which could make Docker crash in some situations
- Don't ping registry from the CLI client
- Enable skip_block_zeroing for devicemapper. This stops devicemapper from always zeroing entire blocks
- Fix --run in `docker commit`. This makes docker commit store `--run` in the image configuration
- Remove directory when removing devicemapper device. This cleans up leftover mount directories
- Drop NET_ADMIN capability for non-privileged containers. Unprivileged containers can't change their network configuration
- Ensure `docker cp` stream is closed properly
- Avoid extra mount/unmount during container registration. This removes an unneeded mount/unmount operation which was causing problems with devicemapper
- Stop allowing tcp:// as a default tcp bin address which binds to 127.0.0.1:4243 and remove the default port
+ Mount-bind the PTY as container console. This allows tmux and screen to run in a container
- Clean up archive closing. This fixes and improves archive handling
- Fix engine tests on systems where temp directories are symlinked
- Add test methods for save and load
- Avoid temporarily unmounting the container when restarting it. This fixes a race for devicemapper during restart
- Support submodules when building from a GitHub repository
- Quote volume path to allow spaces
- Fix remote tar ADD behavior. This fixes a regression which was causing Docker to extract tarballs
returnnil,resp.StatusCode,fmt.Errorf("Error: request returned %s for API route and version %s, check if the server supports the requested API version",http.StatusText(resp.StatusCode),req.URL)
function__fish_docker_no_subcommand--description'Test if docker has yet to be given the subcommand'
foriin(commandline-opc)
ifcontains-- $i attach build commit cp diff events export history images import info insert inspect kill load login logs port ps pull push restart rm rmi run save search start stop tag top version wait
return1
end
end
return0
end
function__fish_print_docker_containers--description'Print a list of docker containers'-a select
complete-c docker -f-n'__fish_docker_no_subcommand'-s D -l debug -d'Enable debug mode'
complete-c docker -f-n'__fish_docker_no_subcommand'-s G -l group -d"Group to assign the unix socket specified by -H when running in daemon mode; use '' (the empty string) to disable setting of a group"
complete-c docker -f-n'__fish_docker_no_subcommand'-s H -l host -d'tcp://host:port, unix://path/to/socket, fd://* or fd://socketfd to use in daemon mode. Multiple sockets can be specified'
complete-c docker -f-n'__fish_docker_no_subcommand'-l api-enable-cors -d'Enable CORS headers in the remote API'
complete-c docker -f-n'__fish_docker_no_subcommand'-s b -l bridge -d"Attach containers to a pre-existing network bridge; use 'none' to disable container networking"
complete-c docker -f-n'__fish_docker_no_subcommand'-l bip -d"Use this CIDR notation address for the network bridge's IP, not compatible with -b"
complete-c docker -f-n'__fish_docker_no_subcommand'-s d -l daemon -d'Enable daemon mode'
complete-c docker -f-n'__fish_docker_no_subcommand'-l dns -d'Force docker to use specific DNS servers'
complete-c docker -f-n'__fish_docker_no_subcommand'-s e -lexec-driver -d'Force the docker runtime to use a specific exec driver'
complete-c docker -f-n'__fish_docker_no_subcommand'-s g -l graph -d'Path to use as the root of the docker runtime'
complete-c docker -f-n'__fish_docker_no_subcommand'-l ip -d'Default IP address to use when binding container ports'
complete-c docker -f-n'__fish_docker_no_subcommand'-l ip-forward -d'Disable enabling of net.ipv4.ip_forward'
complete-c docker -f-n'__fish_docker_no_subcommand'-l iptables -d"Disable docker's addition of iptables rules"
complete-c docker -f-n'__fish_docker_no_subcommand'-l mtu -d'Set the containers network MTU; if no value is provided: default to the default route MTU or 1500 if no default route is available'
complete-c docker -f-n'__fish_docker_no_subcommand'-s p -l pidfile -d'Path to use for daemon PID file'
complete-c docker -f-n'__fish_docker_no_subcommand'-s r -l restart -d'Restart previously running containers'
complete-c docker -f-n'__fish_docker_no_subcommand'-s s -l storage-driver -d'Force the docker runtime to use a specific storage driver'
complete-c docker -f-n'__fish_docker_no_subcommand'-s v -l version -d'Print version information and quit'
# subcommands
# attach
complete-c docker -f-n'__fish_docker_no_subcommand'-a attach -d'Attach to a running container'
complete-c docker -A-f-n'__fish_seen_subcommand_from attach'-l no-stdin -d'Do not attach stdin'
complete-c docker -A-f-n'__fish_seen_subcommand_from attach'-l sig-proxy -d'Proxify all received signal to the process (even in non-tty mode)'
complete-c docker -f-n'__fish_docker_no_subcommand'-a build -d'Build a container from a Dockerfile'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-l no-cache -d'Do not use cache when building the image'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-s q -l quiet -d'Suppress the verbose output generated by the containers'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-l rm -d'Remove intermediate containers after a successful build'
complete-c docker -A-f-n'__fish_seen_subcommand_from build'-s t -l tag -d'Repository name (and optionally a tag) to be applied to the resulting image in case of success'
# commit
complete-c docker -f-n'__fish_docker_no_subcommand'-a commit -d"Create a new image from a container's changes"
complete-c docker -A-f-n'__fish_seen_subcommand_from commit'-s a -l author -d'Author (eg. "John Hannibal Smith <hannibal@a-team.com>"'
complete-c docker -A-f-n'__fish_seen_subcommand_from commit'-s m -l message -d'Commit message'
complete-c docker -A-f-n'__fish_seen_subcommand_from commit'-l run -d'Config automatically applied when the image is run. (ex: -run=\'{"Cmd": ["cat", "/world"], "PortSpecs": ["22"]}\')'
complete -c docker -A -f -n '__fish_seen_subcommand_from commit' -a '(__fish_print_docker_containers all)' -d "Container"
# cp
complete -c docker -f -n '__fish_docker_no_subcommand' -a cp -d 'Copy files/folders from the containers filesystem to the host path'
# diff
complete -c docker -f -n '__fish_docker_no_subcommand' -a diff -d "Inspect changes on a container's filesystem"
complete -c docker -A -f -n '__fish_seen_subcommand_from diff' -a '(__fish_print_docker_containers all)' -d "Container"
# events
complete -c docker -f -n '__fish_docker_no_subcommand' -a events -d 'Get real time events from the server'
complete -c docker -A -f -n '__fish_seen_subcommand_from events' -l since -d 'Show previously created events and then stream.'
# export
complete -c docker -f -n '__fish_docker_no_subcommand' -a export -d 'Stream the contents of a container as a tar archive'
complete -c docker -A -f -n '__fish_seen_subcommand_from export' -a '(__fish_print_docker_containers all)' -d "Container"
# history
complete -c docker -f -n '__fish_docker_no_subcommand' -a history -d 'Show the history of an image'
complete -c docker -A -f -n '__fish_seen_subcommand_from images' -s a -l all -d 'Show all images (by default filter out the intermediate image layers)'
complete -c docker -A -f -n '__fish_seen_subcommand_from ps' -s s -l size -d 'Display sizes'
complete -c docker -A -f -n '__fish_seen_subcommand_from ps' -l since -d 'Show only containers created since Id or Name, include non-running ones.'
# pull
complete -c docker -f -n '__fish_docker_no_subcommand' -a pull -d 'Pull an image or a repository from the docker registry server'
complete -c docker -A -f -n '__fish_seen_subcommand_from pull' -s t -l tag -d 'Download tagged image in repository'
complete -c docker -A -f -n '__fish_seen_subcommand_from pull' -a '(__fish_print_docker_images)' -d "Image"
complete -c docker -A -f -n '__fish_seen_subcommand_from pull' -a '(__fish_print_docker_repositories)' -d "Repository"
# push
complete -c docker -f -n '__fish_docker_no_subcommand' -a push -d 'Push an image or a repository to the docker registry server'
complete -c docker -A -f -n '__fish_seen_subcommand_from push' -a '(__fish_print_docker_images)' -d "Image"
complete -c docker -A -f -n '__fish_seen_subcommand_from push' -a '(__fish_print_docker_repositories)' -d "Repository"
# restart
complete -c docker -f -n '__fish_docker_no_subcommand' -a restart -d 'Restart a running container'
complete -c docker -A -f -n '__fish_seen_subcommand_from restart' -s t -l time -d 'Number of seconds to try to stop for before killing the container. Once killed it will then be restarted. Default=10'
complete -c docker -A -f -n '__fish_seen_subcommand_from restart' -a '(__fish_print_docker_containers running)' -d "Container"
# rm
complete -c docker -f -n '__fish_docker_no_subcommand' -a rm -d 'Remove one or more containers'
complete -c docker -A -f -n '__fish_seen_subcommand_from rm' -s f -l force -d 'Force removal of running container'
complete -c docker -A -f -n '__fish_seen_subcommand_from rm' -s l -l link -d 'Remove the specified link and not the underlying container'
complete -c docker -A -f -n '__fish_seen_subcommand_from rm' -s v -l volumes -d 'Remove the volumes associated to the container'
complete -c docker -A -f -n '__fish_seen_subcommand_from rm' -a '(__fish_print_docker_containers stopped)' -d "Container"
# rmi
complete -c docker -f -n '__fish_docker_no_subcommand' -a rmi -d 'Remove one or more images'
complete -c docker -A -f -n '__fish_seen_subcommand_from rmi' -s f -l force -d 'Force'
complete -c docker -A -f -n '__fish_seen_subcommand_from rmi' -a '(__fish_print_docker_images)' -d "Image"
# run
complete -c docker -f -n '__fish_docker_no_subcommand' -a run -d 'Run a command in a new container'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s P -l publish-all -d 'Publish all exposed ports to the host interfaces'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s a -l attach -d 'Attach to stdin, stdout or stderr.'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s c -l cpu-shares -d 'CPU shares (relative weight)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l cidfile -d 'Write the container ID to the file'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s d -l detach -d 'Detached mode: Run container in the background, print new container id'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l dns -d 'Set custom dns servers'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s e -l env -d 'Set environment variables'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l entrypoint -d 'Overwrite the default entrypoint of the image'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l expose -d 'Expose a port from the container without publishing it to your host'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s h -l hostname -d 'Container host name'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s i -l interactive -d 'Keep stdin open even if not attached'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l link -d 'Add link to another container (name:alias)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s m -l memory -d 'Memory limit (format: <number><optional unit>, where unit= b, k, m or g)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s n -l networking -d 'Enable networking for this container'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l name -d 'Assign a name to the container'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s p -l publish -d "Publish a container's port to the host (format: ip:hostPort:containerPort |ip::containerPort |hostPort:containerPort)(use'docker port' to see the actual mapping)"
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l privileged -d 'Give extended privileges to this container'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l rm -d 'Automatically remove the container when it exits (incompatible with -d)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l sig-proxy -d 'Proxify all received signal to the process (even in non-tty mode)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s t -l tty -d 'Allocate a pseudo-tty'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s u -l user -d 'Username or UID'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s v -l volume -d 'Bind mount a volume (e.g. from the host: -v /host:/container, from docker: -v /container)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -l volumes-from -d 'Mount volumes from the specified container(s)'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -s w -l workdir -d 'Working directory inside the container'
complete -c docker -A -f -n '__fish_seen_subcommand_from run' -a '(__fish_print_docker_images)' -d "Image"
# save
complete -c docker -f -n '__fish_docker_no_subcommand' -a save -d 'Save an image to a tar archive'
complete -c docker -A -f -n '__fish_seen_subcommand_from save' -a '(__fish_print_docker_images)' -d "Image"
# search
complete -c docker -f -n '__fish_docker_no_subcommand' -a search -d 'Search for an image in the docker index'
complete -c docker -A -f -n '__fish_seen_subcommand_from search' -s s -l stars -d 'Only displays with at least xxx stars'
complete -c docker -A -f -n '__fish_seen_subcommand_from search' -s t -l trusted -d 'Only show trusted builds'
# start
complete -c docker -f -n '__fish_docker_no_subcommand' -a start -d 'Start a stopped container'
complete -c docker -A -f -n '__fish_seen_subcommand_from start' -s a -l attach -d "Attach container's stdout/stderr and forward all signals to the process"
complete -c docker -A -f -n '__fish_seen_subcommand_from start' -s i -l interactive -d "Attach container's stdin"
complete -c docker -A -f -n '__fish_seen_subcommand_from start' -a '(__fish_print_docker_containers stopped)' -d "Container"
# stop
complete -c docker -f -n '__fish_docker_no_subcommand' -a stop -d 'Stop a running container'
complete -c docker -A -f -n '__fish_seen_subcommand_from stop' -s t -l time -d 'Number of seconds to wait for the container to stop before killing it.'
complete -c docker -A -f -n '__fish_seen_subcommand_from stop' -a '(__fish_print_docker_containers running)' -d "Container"
# tag
complete -c docker -f -n '__fish_docker_no_subcommand' -a tag -d 'Tag an image into a repository'
complete -c docker -A -f -n '__fish_seen_subcommand_from tag' -s f -l force -d 'Force'
complete -c docker -A -f -n '__fish_seen_subcommand_from tag' -a '(__fish_print_docker_images)' -d "Image"
# top
complete -c docker -f -n '__fish_docker_no_subcommand' -a top -d 'Lookup the running processes of a container'
complete -c docker -A -f -n '__fish_seen_subcommand_from top' -a '(__fish_print_docker_containers running)' -d "Container"
# version
complete -c docker -f -n '__fish_docker_no_subcommand' -a version -d 'Show the docker version information'
# wait
complete -c docker -f -n '__fish_docker_no_subcommand' -a wait -d 'Block until a container stops, then print its exit code'
complete -c docker -A -f -n '__fish_seen_subcommand_from wait' -a '(__fish_print_docker_containers running)' -d"Container"
If you \fBdocker run\fR a container in detached mode (\fB-d\fR), you can reattach to the detached container with \fBdocker attach\fR using the container's ID or name.
.sp
You can detach from the container again (and leave it running) with CTRL-c (for a quiet exit) or CTRL-\ to get a stacktrace of the Docker client when it quits. When you detach from the container the exit code will be returned to the client.
.SH"OPTIONS"
.TP
.B--no-stdin=\fItrue\fR|\fIfalse\fR:
When set to true, do not attach to stdin. The default is \fIfalse\fR.
.TP
.B--sig-proxy=\fItrue\fR|\fIfalse\fR:
When set to true, proxify all received signal to the process (even in non-tty mode). The default is \fItrue\fR.
.sp
.SHEXAMPLES
.sp
.PP
.BAttachingtoacontainer
.TP
In this example the top command is run inside a container, from an image called fedora, in detached mode. The ID from the container is passed into the \fBdocker attach\fR command:
.sp
.nf
.RS
# ID=$(sudo docker run -d fedora /usr/bin/top -b)
# sudo docker attach $ID
top - 02:05:52 up 3:05, 0 users, load average: 0.01, 0.02, 0.05
docker-build \- Build a container image from a Dockerfile source at PATH
.SHSYNOPSIS
.Bdockerbuild
[\fB--no-cache\fR[=\fIfalse\fR]
[\fB-q\fR|\fB--quiet\fR[=\fIfalse\fR]
[\fB--rm\fR[=\fitrue\fR]]
[\fB-t\fR|\fB--tag\fR=\fItag\fR]
PATH | URL | -
.SHDESCRIPTION
This will read the Dockerfile from the directory specified in \fBPATH\fR. It also sends any other files and directories found in the current directory to the Docker daemon. The contents of this directory would be used by ADD command found within the Dockerfile.
Warning, this will send a lot of data to the Docker daemon if the current directory contains a lot of data.
If the absolute path is provided instead of ‘.’, only the files and directories required by the ADD commands from the Dockerfile will be added to the context and transferred to the Docker daemon.
.sp
When a single Dockerfile is given as URL, then no context is set. When a Git repository is set as URL, the repository is used as context.
.SH"OPTIONS"
.TP
.B-q,--quiet=\fItrue\fR|\fIfalse\fR:
When set to true, suppress verbose build output. Default is \fIfalse\fR.
.TP
.B--rm=\fItrue\fr|\fIfalse\fR:
When true, remove intermediate containers that are created during the build process. The default is true.
.TP
.B-t,--tag=\fItag\fR:
Tag to be applied to the resulting image on successful completion of the build.
.TP
.B--no-cache=\fItrue\fR|\fIfalse\fR
When set to true, do not use a cache when building the image. The default is \fIfalse\fR.
.sp
.SHEXAMPLES
.sp
.sp
.BBuildinganimagefromcurrentdirectory
.TP
USing a Dockerfile, Docker images are built using the build command:
.sp
.RS
docker build .
.RE
.sp
If, for some reasone, you do not what to remove the intermediate containers created during the build you must set--rm=false.
.sp
.RS
docker build --rm=false .
.sp
.RE
.sp
A good practice is to make a subdirectory with a related name and create the Dockerfile in that directory. E.g. a directory called mongo may contain a Dockerfile for a MongoDB image, or a directory called httpd may contain an Dockerfile for an Apache web server.
.sp
It is also good practice to add the files required for the image to the subdirectory. These files will be then specified with the `ADD` instruction in the Dockerfile. Note: if you include a tar file, which is good practice, then Docker will automatically extract the contents of the tar file specified in the `ADD` instruction into the specified target.
.sp
.BBuildinganimagecontainerusingaURL
.TP
This will clone the Github repository and use it as context. The Dockerfile at the root of the repository is used as Dockerfile. This only works if the Github repository is a dedicated repository. Note that you can specify an arbitrary Git repository by using the ‘git://’ schema.
docker-images \- List the images in the local repository
.SHSYNOPSIS
.Bdockerimages
[\fB-a\fR|\fB--all\fR=\fIfalse\fR]
[\fB--no-trunc\fR[=\fIfalse\fR]
[\fB-q\fR|\fB--quiet\fR[=\fIfalse\fR]
[\fB-t\fR|\fB--tree\fR=\fIfalse\fR]
[\fB-v\fR|\fB--viz\fR=\fIfalse\fR]
[NAME]
.SHDESCRIPTION
This command lists the images stored in the local Docker repository.
.sp
By default, intermediate images, used during builds, are not listed. Some of the output, e.g. image ID, is truncated, for space reasons. However the truncated image ID, and often the first few characters, are enough to be used in other Docker commands that use the image ID. The output includes repository, tag, image ID, date created and the virtual size.
.sp
The title REPOSITORY for the first title may seem confusing. It is essentially the image name. However, because you can tag a specific image, and multiple tags (image instances) can be associated with a single name, the name is really a repository for all tagged images of the same name.
.SH"OPTIONS"
.TP
.B-a,--all=\fItrue\fR|\fIfalse\fR:
When set to true, also include all intermediate images in the list. The default is false.
.TP
.B--no-trunc=\fItrue\fR|\fIfalse\fR:
When set to true, list the full image ID and not the truncated ID. The default is false.
.TP
.B-q,--quiet=\fItrue\fR|\fIfalse\fR:
When set to true, list the complete image ID as part of the output. The default is false.
.TP
.B-t,--tree=\fItrue\fR|\fIfalse\fR:
When set to true, list the images in a tree dependency tree (hierarchy) format. The default is false.
.TP
.B-v,--viz=\fItrue\fR|\fIfalse\fR
When set to true, list the graph in graphviz format. The default is \fIfalse\fR.
.sp
.SHEXAMPLES
.sp
.BListingtheimages
.TP
To list the images in a local repository (not the registry) run:
.sp
.RS
docker images
.RE
.sp
The list will contain the image repository name, a tag for the image, and an image ID, when it was created and its virtual size. Columns: REPOSITORY, TAG, IMAGE ID, CREATED, and VIRTUAL SIZE.
.sp
To get a verbose list of images which contains all the intermediate images used in builds use \fB-a\fR:
.sp
.RS
docker images -a
.RE
.sp
.BListimagesdependencytreehierarchy
.TP
To list the images in the local repository (not the registry) in a dependency tree format then use the \fB-t\fR|\fB--tree=true\fR option.
.sp
.RS
docker images -t
.RE
.sp
This displays a staggered hierarchy tree where the less indented image is the oldest with dependent image layers branching inward (to the right) on subsequent lines. The newest or top level image layer is listed last in any tree branch.
.sp
.BListimagesinGraphVizformat
.TP
To display the list in a format consumable by a GraphViz tools run with \fB-v\fR|\fB--viz=true\fR. For example to produce a .png graph file of the hierarchy use:
.sp
.RS
docker images --viz | dot -Tpng -o docker.png
.sp
.RE
.sp
.BListingonlytheshortenedimageIDs
.TP
Listing just the shortened image IDs. This can be useful for some automated tools.
.sp
.RS
docker images -q
.RE
.sp
.SHHISTORY
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
This command displays system wide information regarding the Docker installation. Information displayed includes the number of containers and images, pool name, data file, metadata file, data space used, total data space, metadata space used, total metadata space, execution driver, and the kernel version.
.sp
The data file is where the images are stored and the metadata file is where the meta data regarding those images are stored. When run for the first time Docker allocates a certain amount of data space and meta data space from the space available on the volume where /var/lib/docker is mounted.
.SH"OPTIONS"
There are no available options.
.sp
.SHEXAMPLES
.sp
.BDisplayDockersysteminformation
.TP
Here is a sample output:
.sp
.RS
# docker info
Containers: 18
Images: 95
Storage Driver: devicemapper
Pool Name: docker-8:1-170408448-pool
Data file: /var/lib/docker/devicemapper/devicemapper/data
docker-inspect \- Return low-level information on a container/image
.SHSYNOPSIS
.Bdockerinspect
[\fB-f\fR|\fB--format\fR=""
CONTAINER|IMAGE [CONTAINER|IMAGE...]
.SHDESCRIPTION
This displays all the information available in Docker for a given container or image. By default, this will render all results in a JSON array. If a format is specified, the given template will be executed for each result.
.SH"OPTIONS"
.TP
.B-f,--format="":
The text/template package of Go describes all the details of the format. See examples section
.SHEXAMPLES
.sp
.PP
.BGettinginformationonacontainer
.TP
To get information on a container use it's ID or instance name
This will remove one or more containers from the host node. The container name or ID can be used. This does not remove images. You cannot remove a running container unless you use the \fB-f\fR option. To see all containers on a host use the \fBdocker ps -a\fR command.
.SH"OPTIONS"
.TP
.B-f,--force=\fItrue\fR|\fIfalse\fR:
When set to true, force the removal of the container. The default is \fIfalse\fR.
.TP
.B-l,--link=\fItrue\fR|\fIfalse\fR:
When set to true, remove the specified link and not the underlying container. The default is \fIfalse\fR.
.TP
.B-v,--volumes=\fItrue\fR|\fIfalse\fR:
When set to true, remove the volumes associated to the container. The default is \fIfalse\fR.
.SHEXAMPLES
.sp
.PP
.BRemovingacontainerusingitsID
.TP
To remove a container using its ID, find either from a \fBdocker ps -a\fR command, or use the ID returned from the \fBdocker run\fR command, or retrieve it from a file used to store it using the \fBdocker run --cidfile\fR:
.sp
.RS
docker rm abebf7571666
.RE
.sp
.BRemovingacontainerusingthecontainername:
.TP
The name of the container can be found using the \fBdocker ps -a\fR command. The use that name as follows:
.sp
.RS
docker rm hopeful_morse
.RE
.sp
.SHHISTORY
March 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
`docker rm` will remove one or more containers from the host node. The container name or ID can be used. This does not remove images. You cannot remove a running container unless you use the \fB-f\fR option. To see all containers on a host use the `docker ps -a` command.
OPTIONS
-------
`-f`, `--force`=*true*|*false*:
When set to true, force the removal of the container. The default is *false*.
`-l`, `--link`=*true*|*false*:
When set to true, remove the specified link and not the underlying container. The default is *false*.
`-v`, `--volumes`=*true*|*false*:
When set to true, remove the volumes associated to the container. The default is *false*.
EXAMPLES
--------
##Removing a container using its ID##
To remove a container using its ID, find either from a `docker ps -a` command, or use the ID returned from the `docker run` command, or retrieve it from a file used to store it using the `docker run --cidfile`:
docker rm abebf7571666
##Removing a container using the container name##
The name of the container can be found using the \fBdocker ps -a\fR command. The use that name as follows:
docker rm hopeful_morse
HISTORY
-------
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
This will remove one or more images from the host node. This does not remove images from a registry. You cannot remove an image of a running container unless you use the \fB-f\fR option. To see all images on a host use the \fBdocker images\fR command.
.SH"OPTIONS"
.TP
.B-f,--force=\fItrue\fR|\fIfalse\fR:
When set to true, force the removal of the image. The default is \fIfalse\fR.
.SHEXAMPLES
.sp
.PP
.BRemovinganimage
.TP
Here is an example of removing and image:
.sp
.RS
docker rmi fedora/httpd
.RE
.sp
.SHHISTORY
March 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
Run a process in a new container. \fBdocker run\fR starts a process with its own file system, its own networking, and its own isolated process tree. The \fIIMAGE\fR which starts the process may define defaults related to the process that will be run in the container, the networking to expose, and more, but \fBdocker run\fR gives final control to the operator or administrator who starts the container from the image. For that reason \fBdocker run\fR has more options than any other docker command.
If the \fIIMAGE\fR is not already loaded then \fBdocker run\fR will pull the \fIIMAGE\fR, and all image dependencies, from the repository in the same way running \fBdocker pull\fR\fIIMAGE\fR, before it starts the container from that image.
Attach to stdin, stdout or stderr. In foreground mode (the default when -d is not specified), \fBdocker run\fR can start the process in the container and attach the console to the process’s standard input, output, and standard error. It can even pretend to be a TTY (this is what most commandline executables expect) and pass along signals. The \fB-a\fR option can be set for each of stdin, stdout, and stderr.
.TP
.B-c,--cpu-shares=0:
CPU shares in relative weight. You can increase the priority of a container with the -c option. By default, all containers run at the same priority and get the same proportion of CPU cycles, but you can tell the kernel to give more shares of CPU time to one or more containers when you start them via \fBdocker run\fR.
.TP
.B-m,--memory=\fImemory-limit\fR:
Allows you to constrain the memory available to a container. If the host supports swap memory, then the -m memory setting can be larger than physical RAM. The memory limit format: <number><optional unit>, where unit = b, k, m or g.
.TP
.B--cidfile=\fIfile\fR:
Write the container ID to the file specified.
.TP
.B-d,--detach=\fItrue\fR|\fIfalse\fR:
Detached mode. This runs the container in the background. It outputs the new container's id and and error messages. At any time you can run \fBdocker ps\fR in the other shell to view a list of the running containers. You can reattach to a detached container with \fBdocker attach\fR. If you choose to run a container in the detached mode, then you cannot use the -rm option.
.TP
.B--dns=\fIIP-address\fR:
Set custom DNS servers. This option can be used to override the DNS configuration passed to the container. Typically this is necessary when the host DNS configuration is invalid for the container (eg. 127.0.0.1). When this is the case the \fB-dns\fR flags is necessary for every run.
.TP
.B-e,--env=\fIenvironment\fR:
Set environment variables. This option allows you to specify arbitrary environment variables that are available for the process that will be launched inside of the container.
.TP
.B--entrypoint=\ficommand\fR:
This option allows you to overwrite the default entrypoint of the image that is set in the Dockerfile. The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to run when the container starts, but it is (purposely) more difficult to override. The ENTRYPOINT gives a container its default nature or behavior, so that when you set an ENTRYPOINT you can run the container as if it were that binary, complete with default options, and you can pass in more options via the COMMAND. But, sometimes an operator may want to run something else inside the container, so you can override the default ENTRYPOINT at runtime by using a \fB--entrypoint\fR and a string to specify the new ENTRYPOINT.
.TP
.B--expose=\fIport\fR:
Expose a port from the container without publishing it to your host. A containers port can be exposed to other containers in three ways: 1) The developer can expose the port using the EXPOSE parameter of the Dockerfile, 2) the operator can use the \fB--expose\fR option with \fBdocker run\fR, or 3) the container can be started with the \fB--link\fR.
.TP
.B-P,--publish-all=\fItrue\fR|\fIfalse\fR:
When set to true publish all exposed ports to the host interfaces. The default is false. If the operator uses -P (or -p) then Docker will make the exposed port accessible on the host and the ports will be available to any client that can reach the host. To find the map between the host ports and the exposed ports, use \fBdocker port\fR.
.TP
.B-p,--publish=[]:
Publish a container's port to the host (format: ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort) (use 'docker port' to see the actual mapping)
.TP
.B-h,--hostname=\fIhostname\fR:
Sets the container host name that is available inside the container.
.TP
.B-i,--interactive=\fItrue\fR|\fIfalse\fR:
When set to true, keep stdin open even if not attached. The default is false.
.TP
.B--link=\fIname\fR:\fIalias\fR:
Add link to another container. The format is name:alias. If the operator uses \fB--link\fR when starting the new client container, then the client container can access the exposed port via a private networking interface. Docker will set some environment variables in the client container to help indicate which interface and port to use.
.TP
.B-n,--networking=\fItrue\fR|\fIfalse\fR:
By default, all containers have networking enabled (true) and can make outgoing connections. The operator can disable networking with \fB--networking\fR to false. This disables all incoming and outgoing networking. In cases like this, I/O can only be performed through files or by using STDIN/STDOUT.
Also by default, the container will use the same DNS servers as the host. but you canThe operator may override this with \fB-dns\fR.
.TP
.B--name=\fIname\fR:
Assign a name to the container. The operator can identify a container in three ways:
.sp
.nf
UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
UUID short identifier (“f78375b1c487”)
Name (“jonah”)
.fi
.sp
The UUID identifiers come from the Docker daemon, and if a name is not assigned to the container with \fB--name\fR then the daemon will also generate a random string name. The name is useful when defining links (see \fB--link\fR) (or any other place you need to identify a container). This works for both background and foreground Docker containers.
.TP
.B--privileged=\fItrue\fR|\fIfalse\fR:
Give extended privileges to this container. By default, Docker containers are “unprivileged” (=false) and cannot, for example, run a Docker daemon inside the Docker container. This is because by default a container is not allowed to access any devices. A “privileged” container is given access to all devices.
When the operator executes \fBdocker run -privileged\fR, Docker will enable access to all devices on the host as well as set some configuration in AppArmor (\fB???\fR) to allow the container nearly all the same access to the host as processes running outside of a container on the host.
.TP
.B--rm=\fItrue\fR|\fIfalse\fR:
If set to \fItrue\fR the container is automatically removed when it exits. The default is \fIfalse\fR. This option is incompatible with \fB-d\fR.
.TP
.B--sig-proxy=\fItrue\fR|\fIfalse\fR:
When set to true, proxify all received signals to the process (even in non-tty mode). The default is true.
.TP
.B-t,--tty=\fItrue\fR|\fIfalse\fR:
When set to true Docker can allocate a pseudo-tty and attach to the standard input of any container. This can be used, for example, to run a throwaway interactive shell. The default is value is false.
.TP
.B-u,--user=\fIusername\fR,\fRuid\fR:
Set a username or UID for the container.
.TP
.B-v,--volume=\fIvolume\fR:
Bind mount a volume to the container. The \fB-v\fR option can be used one or more times to add one or more mounts to a container. These mounts can then be used in other containers using the \fB--volumes-from\fR option. See examples.
.TP
.B--volumes-from=\fIcontainer-id\fR:
Will mount volumes from the specified container identified by container-id. Once a volume is mounted in a one container it can be shared with other containers using the \fB--volumes-from\fR option when running those other containers. The volumes can be shared even if the original container with the mount is not running.
.TP
.B-w,--workdir=\fIdirectory\fR:
Working directory inside the container. The default working directory for running binaries within a container is the root directory (/). The developer can set a different default with the Dockerfile WORKDIR instruction. The operator can override the working directory by using the \fB-w\fR option.
.TP
.BIMAGE:
The image name or ID.
.TP
.BCOMMAND:
The command or program to run inside the image.
.TP
.BARG:
The arguments for the command to be run in the container.
If you want messages that are logged in your container to show up in the host's syslog/journal then you should bind mount the /var/log directory as follows.
.sp
.RS
docker run -v /dev/log:/dev/log -i -t fedora /bin/bash
.RE
.sp
From inside the container you can test this by sending a message to the log.
.sp
.RS
logger "Hello from my container"
.sp
.RE
Then exit and check the journal.
.RS
.sp
exit
.sp
journalctl -b | grep hello
.RE
.sp
This should list the message sent to logger.
.sp
.BAttachingtooneormorefromSTDIN,STDOUT,STDERR
.TP
If you do not specify -a then Docker will attach everything (stdin,stdout,stderr). You can specify to which of the three standard streams (stdin, stdout, stderr) you’d like to connect instead, as in:
.sp
.RS
docker run -a stdin -a stdout -i -t fedora /bin/bash
.RE
.sp
.BLinkingContainers
.TP
The link feature allows multiple containers to communicate with each other. For example, a container whose Dockerfile has exposed port 80 can be run and named as follows:
.sp
.RS
docker run --name=link-test -d -i -t fedora/httpd
.RE
.sp
.TP
A second container, in this case called linker, can communicate with the httpd container, named link-test, by running with the \fB--link=<name>:<alias>\fR
.sp
.RS
docker run -t -i --link=link-test:lt --name=linker fedora /bin/bash
.RE
.sp
.TP
Now the container linker is linked to container link-test with the alias lt. Running the \fBenv\fR command in the linker container shows environment variables with the LT (alias) context (\fBLT_\fR)
When linking two containers Docker will use the exposed ports of the container to create a secure tunnel for the parent to access.
.TP
.sp
.BMappingPortsforExternalUsage
.TP
The exposed port of an application can be mapped to a host port using the \fB-p\fR flag. For example a httpd port 80 can be mapped to the host port 8080 using the following:
.sp
.RS
docker run -p 8080:80 -d -i -t fedora/httpd
.RE
.sp
.TP
.BCreatingandMountingaDataVolumeContainer
.TP
Many applications require the sharing of persistent data across several containers. Docker allows you to create a Data Volume Container that other containers can mount from. For example, create a named container that contains directories /var/volume1 and /tmp/volume2. The image will need to contain these directories so a couple of RUN mkdir instructions might be required for you fedora-data image:
docker run --volumes-from=data --name=fedora-container1 -i -t fedora bash
.RE
.sp
.TP
Multiple -volumes-from parameters will bring together multiple data volumes from multiple containers. And it's possible to mount the volumes that came from the DATA container in yet another container via the fedora-container1 intermidiery container, allowing to abstract the actual data source from users of that data:
.sp
.RS
docker run --volumes-from=fedora-container1 --name=fedora-container2 -i -t fedora bash
.RE
.TP
.sp
.BMountingExternalVolumes
.TP
To mount a host directory as a container volume, specify the absolute path to the directory and the absolute path for the container directory separated by a colon:
.sp
.RS
docker run -v /var/db:/data1 -i -t fedora bash
.RE
.sp
.TP
When using SELinux, be aware that the host has no knowledge of container SELinux policy. Therefore, in the above example, if SELinux policy is enforced, the /var/db directory is not writable to the container. A "Permission Denied" message will occur and an avc: message in the host's syslog.
.sp
.TP
To work around this, at time of writing this man page, the following command needs to be run in order for the proper SELinux policy type label to be attached to the host directory:
.sp
.RS
chcon -Rt svirt_sandbox_file_t /var/db
.RE
.sp
.TP
Now, writing to the /data1 volume in the container will be allowed and the changes will also be reflected on the host in /var/db.
.sp
.SHHISTORY
March 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
docker \- Docker image and container command line interface
.SHSYNOPSIS
.Bdocker[OPTIONS][COMMAND][arg...]
.SHDESCRIPTION
\fBdocker\fR has two distinct functions. It is used for starting the Docker daemon and to run the CLI (i.e., to command the daemon to manage images, containers etc.) So \fBdocker\fR is both a server as deamon and a client to the daemon through the CLI.
.sp
To run the Docker deamon you do not specify any of the commands listed below but must specify the \fB-d\fR option. The other options listed below are for the daemon only.
.sp
The Docker CLI has over 30 commands. The commands are listed below and each has its own man page which explain usage and arguements.
.sp
To see the man page for a command run \fBman docker <command>\fR.
=[/var/run/docker.sock] is omitted, default values are used.
.TP
.B\-\-api-enable-cors=false
Enable CORS headers in the remote API
.TP
.B\-b=""
Attach containers to a pre\-existing network bridge; use 'none' to disable container networking
.TP
.B\-\-bip=""
Use the provided CIDR notation address for the dynamically created bridge (docker0); Mutually exclusive of \-b
.TP
.B\-d=false
Enable daemon mode
.TP
.B\-\-dns=""
Force Docker to use specific DNS servers
.TP
.B\-g="/var/lib/docker"
Path to use as the root of the Docker runtime
.TP
.B\-\-icc=true
Enable inter\-container communication
.TP
.B\-\-ip="0.0.0.0"
Default IP address to use when binding container ports
.TP
.B\-\-iptables=true
Disable Docker's addition of iptables rules
.TP
.B\-\-mtu=1500
Set the containers network mtu
.TP
.B\-p="/var/run/docker.pid"
Path to use for daemon PID file
.TP
.B\-r=true
Restart previously running containers
.TP
.B\-s=""
Force the Docker runtime to use a specific storage driver
.TP
.B\-v=false
Print version information and quit
.SH"COMMANDS"
.TP
.Battach
Attach to a running container
.TP
.Bbuild
Build a container from a Dockerfile
.TP
.Bcommit
Create a new image from a container's changes
.TP
.Bcp
Copy files/folders from the containers filesystem to the host at path
.TP
.Bdiff
Inspect changes on a container's filesystem
.TP
.Bevents
Get real time events from the server
.TP
.Bexport
Stream the contents of a container as a tar archive
.TP
.Bhistory
Show the history of an image
.TP
.Bimages
List images
.TP
.Bimport
Create a new filesystem image from the contents of a tarball
.TP
.Binfo
Display system-wide information
.TP
.Binsert
Insert a file in an image
.TP
.Binspect
Return low-level information on a container
.TP
.Bkill
Kill a running container (which includes the wrapper process and everything inside it)
.TP
.Bload
Load an image from a tar archive
.TP
.Blogin
Register or Login to a Docker registry server
.TP
.Blogs
Fetch the logs of a container
.TP
.Bport
Lookup the public-facing port which is NAT-ed to PRIVATE_PORT
.TP
.Bps
List containers
.TP
.Bpull
Pull an image or a repository from a Docker registry server
.TP
.Bpush
Push an image or a repository to a Docker registry server
.TP
.Brestart
Restart a running container
.TP
.Brm
Remove one or more containers
.TP
.Brmi
Remove one or more images
.TP
.Brun
Run a command in a new container
.TP
.Bsave
Save an image to a tar archive
.TP
.Bsearch
Search for an image in the Docker index
.TP
.Bstart
Start a stopped container
.TP
.Bstop
Stop a running container
.TP
.Btag
Tag an image into a repository
.TP
.Btop
Lookup the running processes of a container
.TP
.Bversion
Show the Docker version information
.TP
.Bwait
Block until a container stops, then print its exit code
.SHEXAMPLES
.sp
For specific examples please see the man page for the specific Docker command.
.sp
.SHHISTORY
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on dockier.io source material and internal work.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Michael Crosby