Restored these changes that I made prior to the Xmas holiday:

1) Fixed language per feedback.
2) Renamed Rufus-figure-1.png, Rufus-figure-2.png, Rufus-figure-3.png, 7zipwin.png to approved figure naming convention.
3) Fixed minor markup issues.

Sgne-off-by: Bun K Tan <bun.k.tan@intel.com>

source/clear-linux/get-started/bootable-usb/bootable-usb-linux.rst

@@ -37,7 +37,7 @@ Burn the Clear Linux image onto a USB drive
 
 #. Go to the directory with the uncompressed image.
 #. Plug in the USB drive.
-#. Identify the USB drive using the `lsblk` command.  This shows all drives
+#. Identify the USB drive using the :command:`lsblk` command.  This shows all drives
    attached to the system, including the primary hard disk. In the example
    output below, there are 4 drives (`/dev/sda`, `/dev/sdb`, `/dev/sdc`, and
    `/dev/sdd`) attached, where `/dev/sda` is primary drive in this case. The
@@ -73,8 +73,8 @@ Burn the Clear Linux image onto a USB drive
 
 #. Before an image can be burned onto a USB drive, it should be un-mounted.
    Some Linux distros may automatically mount a USB drive when it is plugged
-   in. To unmount, use the `umount` command followed by the device
-   identifier/partition. For example: From the above `lsblk` output,
+   in. To unmount, use the :command:`umount` command followed by the device
+   identifier/partition. For example: From the above :command:`lsblk` output,
    `/dev/sdd` has 2 mounted partitions.  To unmount them, enter:
 
    .. code-block:: console

source/clear-linux/get-started/bootable-usb/bootable-usb-mac.rst

@@ -31,7 +31,7 @@ Burn the Clear Linux image onto a USB drive
 #. Launch the Terminal app.
 #. Go to the directory with the uncompressed image.
 #. Plug in a USB drive and get its identifier by entering the command
-   `diskutil list`.  See Figure 1.
+   :command:`diskutil list`.  See Figure 1.
 
    .. code-block:: console
 
@@ -41,6 +41,8 @@ Burn the Clear Linux image onto a USB drive
       :scale: 100 %
       :alt: Get USB drive identifier
 
+      Figure 1: macOS - Get USB drive identifier
+
 #. Unmount the USB drive identified in the previous step.  The command-line
    example below umounts `/dev/disk2`:
 
@@ -48,18 +50,18 @@ Burn the Clear Linux image onto a USB drive
 
       $ diskutil umountDisk /dev/disk2
 
-#. Burn the image onto the drive.  The command-line example below burns an
-   uncompressed image onto `/dev/disk2`:
+#. Burn the image onto the drive using the :command:`dd` command.  The 
+   command-line example below burns an uncompressed image onto `/dev/disk2`:
 
    .. code-block:: console
 
       $ sudo dd if=./clear-[version number]-[image type] of=/dev/rdisk2 bs=4m
 
-   .. note::
 
-      * Adding an ‘r’ in front of the disk identifier should help speed up the
-        imaging process.
-      * Press :kbd:`<CTL>-T` to check imaging progress.
+   Adding an ‘r’ in front of the disk identifier should help speed up the 
+   imaging process.
+   
+   You can press :kbd:`<CTL>-T` to check imaging progress.
 
 #. Eject the USB drive.
 

source/clear-linux/get-started/bootable-usb/bootable-usb-windows.rst

@@ -27,15 +27,34 @@ Burn the Clear Linux image onto a USB drive
 
    |CAUTION-BACKUP-USB|
 
-#. Download the `Rufus`_ tool to burn the image onto a USB drive.
-#. Plug in the USB drive.
-#. Click the CD-ROM icon button and select the |CL| image file.  See Figure 1.
-#. Ensure that :guilabel:`Create a bootable disk using DD
-   Image` is checked.
+#. 	Download the `Rufus`_ tool to burn the image onto a USB drive.
+#. 	Plug in the USB drive.
+#. 	Click the :guilabel:`CD-ROM` icon button. See Figure 1.
 
-   .. figure:: figures/bootable-usb-windows-1.png
-      :scale: 100 %
-      :alt: Burn image onto USB drive
+	.. figure:: figures/bootable-usb-windows-1.png
+		:scale: 80 %
+		:alt: Rufus utility - Click CD-ROM button
+
+		Figure 1: Rufus utility - Click CD-ROM button
+
+#.	By default, Rufus only shows ISO files.  To find and select a compressed |CL| 
+	image file, you must click the file-type dropdown and select :guilabel:`All files`. 
+	See Figure 2.
+
+	.. figure:: figures/bootable-usb-windows-2.png
+		:scale:	80 %
+		:alt: Rufus utility - Show and select |CL| image file
+
+	Figure 2: Rufus utility - Show and select |CL| image file
+    
+#.	Verify that :guilabel:`Create a bootable disk using DD Image` checkbox is
+	checked. See Figure 3.
+
+	.. figure:: figures/bootable-usb-windows-3.png
+		:scale: 80 %
+		:alt: Rufus utility - Create a bootable disk using DD Image
+
+		Figure 3: Rufus utility - Create a bootable disk using DD Image
 
 #. Click :guilabel:`Start`.
 

source/clear-linux/guides/maintenance/download-verify-uncompress-linux.rst

@@ -19,11 +19,10 @@ We also provide instructions for other operating systems:
 Verify the integrity of the Clear Linux image
 *********************************************
 
-Before you use a downloaded |CL| image, it is recommended that you verify its
-integrity to eliminate the chance, albeit small, that it might be corrupted
-due to any download issues.  To support this, each released |CL| image is
-accompanied by an official SHA512 checksum file, which is designated with the
-suffix `-SHA512SUMS`.
+Before you use a downloaded |CL| image, verify its integrity. Thus, you 
+eliminate the small chance of a corrupted image due to download issues.
+To support verification, we accompany each released |CL| image with an official 
+SHA512 checksum file, which is designated with the suffix `-SHA512SUMS`.  
 
 #.  Download the official corresponding SHA512 checksum file of your
     downloaded |CL| image.
@@ -43,10 +42,9 @@ a match and your downloaded image is good.
 Uncompress the Clear Linux image
 ********************************
 
-All released |CL| images are compressed by default using either GNU zip
-(`.gz`) or XZ (`.xz`).  The compression typed used is dependent on which
-platform/enviroment the image is targeted for.  Uncompress your image using
-these steps:
+We compress all released |CL| images by default with either GNU zip 
+(`.gz`) or XZ (`.xz`). The compression type we use depends on the target 
+platform or environment of the image. To uncompress the image, follow these steps:
 
 #.  Start a terminal emulator.
 #.  Go to the directory with the downloaded image.

source/clear-linux/guides/maintenance/download-verify-uncompress-mac.rst

@@ -19,11 +19,10 @@ We also provide instructions for other operating systems:
 Verify the integrity of the Clear Linux image
 *********************************************
 
-Before you use a downloaded |CL| image, it is recommended that you verify its
-integrity to eliminate the chance, albeit small, that it might be corrupted
-due to any download issues.  To support this, each released |CL| image is
-accompanied by an official SHA512 checksum file, which is designated with the
-suffix `-SHA512SUMS`.
+Before you use a downloaded |CL| image, verify its integrity. Thus, you 
+eliminate the small chance of a corrupted image due to download issues.
+To support verification, we accompany each released |CL| image with an official 
+SHA512 checksum file, which is designated with the suffix `-SHA512SUMS`.  
 
 #. Download the official corresponding SHA512 checksum file of your
    downloaded |CL| image.
@@ -43,10 +42,9 @@ a match and your downloaded image is good.
 Uncompress the Clear Linux image
 ********************************
 
-All released |CL| images are compressed by default using either GNU zip
-(`.gz`) or XZ (`.xz`).  The compression typed used is dependent on which
-platform/enviroment the image is targeted for.  Uncompress your image using
-these steps:
+We compress all released |CL| images by default with either GNU zip 
+(`.gz`) or XZ (`.xz`). The compression type we use depends on the target 
+platform or environment of the image. To uncompress the image, follow these steps:
 
 #. Start the Terminal app.
 #. Go to the directory with the downloaded image.

source/clear-linux/guides/maintenance/download-verify-uncompress-windows.rst

@@ -19,11 +19,10 @@ We also provide instructions for other operating systems:
 Verify the integrity of the Clear Linux image
 *********************************************
 
-Before you use a downloaded |CL| image, it is recommended that you verify its
-integrity to eliminate the chance, albeit small, that it might be corrupted
-due to any download issues.  To support this, each released |CL| image is
-accompanied by an official SHA512 checksum file, which is designated with the
-suffix `-SHA512SUMS`.
+Before you use a downloaded |CL| image, verify its integrity. Thus, you 
+eliminate the small chance of a corrupted image due to download issues.
+To support verification, we accompany each released |CL| image with an official 
+SHA512 checksum file, which is designated with the suffix `-SHA512SUMS`.  
 
 #.  Download the official corresponding SHA512 checksum file of your
     downloaded |CL| image.
@@ -41,10 +40,9 @@ suffix `-SHA512SUMS`.
 Uncompress the Clear Linux image
 ********************************
 
-All released |CL| images are compressed by default using either GNU zip
-(`.gz`) or XZ (`.xz`).  The compression typed used is dependent on which
-platform/enviroment the image is targeted for.  Uncompress your image using
-these steps:
+We compress all released |CL| images by default with either GNU zip 
+(`.gz`) or XZ (`.xz`). The compression type we use depends on the target 
+platform or environment of the image. To uncompress the image, follow these steps:
 
 #. Download and install `7zip`_.
 #. Locate the |CL| image and right-click it.