The following testcases are miscompiled, because expand_vec_perm_pshufb
incorrectly thinks it can use vpshufb instruction for the permutations
when it can't.
The
if (vmode == V32QImode)
{
/* vpshufb only works intra lanes, it is not
possible to shuffle bytes in between the lanes. */
for (i = 0; i < nelt; ++i)
if ((d->perm[i] ^ i) & (nelt / 2))
return false;
}
intra-lane check which is correct has been copied and adjusted for 64-byte
modes into:
if (vmode == V64QImode)
{
/* vpshufb only works intra lanes, it is not
possible to shuffle bytes in between the lanes. */
for (i = 0; i < nelt; ++i)
if ((d->perm[i] ^ i) & (nelt / 4))
return false;
}
which is not correct, because 64-byte modes have 4 lanes rather than just
two and the above is only testing that the permutation grabs even lane elts
from even lanes and odd lane elts from odd lanes, but not that they are
from the same 256-bit half.
The following patch fixes it by using 3 * nelt / 4 instead of nelt / 4,
so we actually check the most significant 2 bits rather than just one.
2020-04-07 Jakub Jelinek <jakub@redhat.com>
PR target/94509
* config/i386/i386-expand.c (expand_vec_perm_pshufb): Fix the check
for inter-lane permutation for 64-byte modes.
* gcc.target/i386/avx512bw-pr94509-1.c: New test.
* gcc.target/i386/avx512bw-pr94509-2.c: New test.
We need to set OMP_PARALLEL_COMBINED only if the parsing of omp_master
succeeded, because otherwise there is no nested master construct in the
parallel.
2020-04-07 Jakub Jelinek <jakub@redhat.com>
PR c++/94512
* c-parser.c (c_parser_omp_parallel): Set OMP_PARALLEL_COMBINED
if c_parser_omp_master succeeded.
* parser.c (cp_parser_omp_parallel): Set OMP_PARALLEL_COMBINED
if cp_parser_omp_master succeeded.
* g++.dg/gomp/pr94512.C: New test.
The following testcase ICEs on aarch64 apparently since the introduction of
the aarch64 port. The reason is that the {ashl,ashr,lshr}<mode>3 expanders
completely unnecessarily FAIL; if operands[2] is something other than
a CONST_INT or REG or MEM and the middle-end code can't cope with the
pattern giving up in these cases. All the expanders use general_operand
predicate for the shift amount operand, but then have just a special case
for CONST_INT (if in-bound, emit an immediate shift, otherwise force into
REG), or MEM (force into REG), or REG (that is the case it handles).
In the testcase, operands[2] is a lowpart SUBREG of a REG, which is valid
general_operand.
I don't see any reason what is magic about MEMs that it should be forced
into REG and others like SUBREGs that it shouldn't, there isn't even a
reason to check for !REG_P because force_reg will do nothing if the operand
is already a REG, and otherwise can handle general_operand just fine.
2020-04-07 Jakub Jelinek <jakub@redhat.com>
PR target/94488
* config/aarch64/aarch64-simd.md (ashl<mode>3, lshr<mode>3,
ashr<mode>3): Force operands[2] into reg whenever it is not CONST_INT.
Assume it is a REG after that instead of testing it and doing FAIL
otherwise. Formatting fix.
* gcc.c-torture/compile/pr94488.c: New test.
On the following testcase, in gdb ptype S<long>::m1 prints long as return
type, but all the other methods show void instead.
PR53756 added code to add_type_attribute if the return type is
auto/decltype(auto), but we actually should look through references,
pointers and qualifiers.
Haven't included there DW_TAG_atomic_type, because I think at least ATM
one can't use that in C++. Not sure about DW_TAG_array_type or what else
could be deduced.
> http://eel.is/c++draft/dcl.spec.auto#3 says it has to appear as a
> decl-specifier.
>
> http://eel.is/c++draft/temp.deduct.type#8 lists the forms where a template
> argument can be deduced.
>
> Looks like you are missing arrays, pointers to members, and function return
> types.
2020-04-04 Hannes Domani <ssbssa@yahoo.de>
Jakub Jelinek <jakub@redhat.com>
PR debug/94459
* dwarf2out.c (gen_subprogram_die): Look through references, pointers,
arrays, pointer-to-members, function types and qualifiers when
checking if in-class DIE had an 'auto' or 'decltype(auto)' return type
to emit type again on definition.
* g++.dg/debug/pr94459.C: New test.
Co-Authored-By: Hannes Domani <ssbssa@yahoo.de>
The following testcase ICEs, because for parallel combined with some
other construct we initialize the omp_parallel_combined_clauses pointer
and expect the construct combined with it to clear it after it no longer
needs it, but OMP_MASTER didn't do that.
2020-04-04 Jakub Jelinek <jakub@redhat.com>
PR c++/94477
* pt.c (tsubst_expr) <case OMP_MASTER>: Clear
omp_parallel_combined_clauses.
* g++.dg/gomp/pr94477.C: New test.
The following testcase is miscompiled, because the AVX2 patterns don't
describe correctly what the insn does. E.g. vphaddd with %ymm* operands
(the second pattern) instruction as per:
https://software.intel.com/sites/landingpage/IntrinsicsGuide/#text=_mm256_hadd_epi32&expand=2941
does { a0+a1, a2+a3, b0+b1, b2+b3, a4+a5, a6+a7, b4+b5, b6+b7 }
but our RTL pattern did
{ a0+a1, a2+a3, a4+a5, a6+a7, b0+b1, b2+b3, b4+b5, b6+b7 }
where the first and last 64 bits are the same and two middle 64 bits
swapped.
https://software.intel.com/sites/landingpage/IntrinsicsGuide/#text=_mm256_hadd_epi16&expand=2939
similarly, insn does:
{ a0+a1, a2+a3, a4+a5, a6+a7, b0+b1, b2+b3, b4+b5, b6+b7,
a8+a9, a10+a11, a12+a13, a14+a15, b8+b9, b10+b11, b12+b13, b14+b15 }
but RTL pattern did
{ a0+a1, a2+a3, a4+a5, a6+a7, a8+a9, a10+a11, a12+a13, a14+a15,
b0+b1, b2+b3, b4+b5, b6+b7, b8+b9, b10+b11, b12+b13, b14+b15 }
again, first and last 64 bits are the same and the two middle 64 bits
swapped.
2020-04-03 Jakub Jelinek <jakub@redhat.com>
PR target/94460
* config/i386/sse.md (avx2_ph<plusminus_mnemonic>wv16hi3,
avx2_ph<plusminus_mnemonic>dv8si3): Fix up RTL pattern to do
second half of first lane from first lane of second operand and
first half of second lane from second lane of first operand.
* gcc.target/i386/avx2-pr94460.c: New test.
The following testcase ICEs because the objsz pass calls replace_uses_by
on SSA_NAME_OCCURS_IN_ABNORMAL_PHI SSA_NAME. The following patch instead
of that calls replace_call_with_value, which will turn it into
xyz_123(ab) = 234;
2020-04-01 Jakub Jelinek <jakub@redhat.com>
PR middle-end/94423
* tree-object-size.c (pass_object_sizes::execute): Don't call
replace_uses_by for SSA_NAME_OCCURS_IN_ABNORMAL_PHI lhs, instead
call replace_call_with_value.
* gcc.dg/ubsan/pr94423.c: New test.
The following testcase is miscompiled since 4.9, we treat unsigned
vector types as if they were signed and "optimize" negations across it.
2020-03-31 Marc Glisse <marc.glisse@inria.fr>
Jakub Jelinek <jakub@redhat.com>
PR middle-end/94412
* fold-const.c (fold_binary_loc) <case TRUNC_DIV_EXPR>: Use
ANY_INTEGRAL_TYPE_P instead of INTEGRAL_TYPE_P.
* gcc.c-torture/execute/pr94412.c: New test.
Co-authored-by: Marc Glisse <marc.glisse@inria.fr>
The following testcase ICEs, because the FE when processing the statement
expression changes the .VEC_CONVERT internal fn CALL_EXPR into .PHI call.
That is because the internal fn call is recorded in the base.u.ifn
field, which overlaps base.u.bits.lang_flag_1 which is used for
STMT_IS_FULL_EXPR_P, so this essentially does ifn |= 2 on little-endian.
STMT_IS_FULL_EXPR_P bit is used in:
cp-gimplify.c- if (STATEMENT_CODE_P (code))
cp-gimplify.c- {
cp-gimplify.c- saved_stmts_are_full_exprs_p = stmts_are_full_exprs_p ();
cp-gimplify.c- current_stmt_tree ()->stmts_are_full_exprs_p
cp-gimplify.c: = STMT_IS_FULL_EXPR_P (*expr_p);
cp-gimplify.c- }
and
pt.c- if (STATEMENT_CODE_P (TREE_CODE (t)))
pt.c: current_stmt_tree ()->stmts_are_full_exprs_p = STMT_IS_FULL_EXPR_P (t);
so besides being wrong on some other codes, it actually isn't beneficial at
all to set it on anything else, so the following patch restricts it to
trees with STATEMENT_CODE_P TREE_CODE.
2020-03-30 Jakub Jelinek <jakub@redhat.com>
PR c++/94385
* semantics.c (add_stmt): Only set STMT_IS_FULL_EXPR_P on trees with
STATEMENT_CODE_P code.
* c-c++-common/pr94385.c: New test.
The AVX512F documentation clearly states that in instructions where the
destination is a memory only merging-masking is possible, not zero-masking,
and the assembler enforces that.
The testcase in this patch fails to assemble because of
Error: unsupported masking for `vextracti32x8'
on
vextracti32x8 $0x0, %zmm1, -64(%rsp){%k1}{z}
For the vector extraction patterns, we apparently have 7 *_maskm patterns
that only accept memory destinations and rtx_equal_p merge-masking source
for it, 7 *<mask_name> corresponding patterns that allow memory destination
only for the non-masked cases (through <store_mask_constraint>), then 2
*<mask_name> patterns (lo ssehalf V16FI and lo ssehalf VI8F_256 ones) which
do allow memory destination even for masked cases and are the cause of the
testsuite failure, because we must not allow C constraint if the destination
is m, and finally one pair of patterns (separate * and *_mask, hi ssehalf
VI4F_256), which has another issue (for which I don't have a testcase
though), where if it would match zero-masking with register destination,
it wouldn't emit the needed {z} into assembly.
The attached patch fixes those 3 issues only, perhaps more suitable for
backporting.
2020-03-30 Jakub Jelinek <jakub@redhat.com>
PR target/93069
* config/i386/sse.md (vec_extract_lo_<mode><mask_name>): Use
<store_mask_constraint> instead of m in output operand constraint.
(vec_extract_hi_<mode><mask_name>): Use <mask_operand2> instead of
%{%3%}.
* gcc.target/i386/avx512vl-pr93069.c: New test.
* gcc.dg/vect/pr93069.c: New test.
The following testcase FAILs with -fcompare-debug, because reassociate_bb
mishandles the case when the last stmt in a bb has zero uses. In that case
reassoc_remove_stmt (like gsi_remove) moves the iterator to the next stmt,
i.e. gsi_end_p is true, which means the code sets the iterator back to
gsi_last_bb. The problem is that the for loop does gsi_prev on that before
handling the next statement, which means the former penultimate stmt, now
last one, is not processed by reassociate_bb.
Now, with -g, if there is at least one debug stmt at the end of the bb,
reassoc_remove_stmt moves the iterator to that following debug stmt and we
just do gsi_prev and continue with the former penultimate non-debug stmt,
now last non-debug stmt.
The following patch fixes that by not doing the gsi_prev in this case; there
are too many continue; cases, so I didn't want to copy over the gsi_prev to
all of them, so this patch uses a bool for that instead. The second
gsi_end_p check isn't needed anymore, because when we don't do the
undesirable gsi_prev after gsi = gsi_last_bb, the loop !gsi_end_p (gsi)
condition will catch the removal of the very last stmt from a bb.
2020-03-28 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94329
* tree-ssa-reassoc.c (reassociate_bb): When calling reassoc_remove_stmt
on the last stmt in a bb, make sure gsi_prev isn't done immediately
after gsi_last_bb.
* gfortran.dg/pr94329.f90: New test.
The following testcase is miscompiled, because output_constructor doesn't
output the initializer correctly. The FE creates {[1...2] = 9} in this
case, and we emit .long 9; long 9; .zero 8 instead of the expected
.zero 8; .long 9; .long 9. If the CONSTRUCTOR is {[1] = 9, [2] = 9},
output_constructor_regular_field has code to notice that the current
location (local->total_bytes) is smaller than the location we want to write
to (1*sizeof(elt)) and will call assemble_zeros to skip those. But
RANGE_EXPRs are handled by a different function which didn't do this,
so for RANGE_EXPRs we emitted them properly only if local->total_bytes
was always equal to the location where the RANGE_EXPR needs to start.
2020-03-25 Jakub Jelinek <jakub@redhat.com>
PR middle-end/94303
* varasm.c (output_constructor_array_range): If local->index
RANGE_EXPR doesn't start at the current location in the constructor,
skip needed number of bytes using assemble_zeros or assert we don't
go backwards.
PR middle-end/94303
* g++.dg/torture/pr94303.C: New test.
The following testcase shows -fcompare-debug bugs in ifcvt_local_dce,
where the decisions what statements are needed is based also on debug stmt
operands, which is wrong.
So, this patch makes sure to never add debug stmt to the worklist, or never
add an assign to worklist just because it is used in a debug stmt in another
bb.
2020-03-24 Jakub Jelinek <jakub@redhat.com>
PR debug/94283
* tree-if-conv.c (ifcvt_local_dce): For gimple debug stmts, just set
GF_PLF_2, but don't add them to worklist. Don't add an assigment to
worklist or set GF_PLF_2 just because it is used in a debug stmt in
another bb. Formatting improvements.
* gcc.target/i386/pr94283.c: New test.
The following testcase FAILs with -fcompare-debug, but not because -g vs.
-g0 would make a difference, but because the second compilation is done with
-w in order not to emit warnings twice and -w seems to affect the *.gkd dump
content.
This is because TREE_NO_WARNING flag, or warn_unused_function does affect
not just whether a warning/pedwarn is printed, but also whether we set
TREE_PUBLIC on such decls.
The following patch makes sure we set it regardless of anything warning
related (TREE_NO_WARNING or warn_unused_function).
2020-03-24 Jakub Jelinek <jakub@redhat.com>
PR debug/94277
* cgraphunit.c (check_global_declaration): For DECL_EXTERNAL and
non-TREE_PUBLIC non-DECL_ARTIFICIAL FUNCTION_DECLs, set TREE_PUBLIC
regardless of whether TREE_NO_WARNING is set on it or whether
warn_unused_function is true or not.
* gcc.dg/pr94277.c: New test.
Unfortunately the patch broke
+FAIL: gcc.dg/pr20245-1.c (internal compiler error)
+FAIL: gcc.dg/pr20245-1.c (test for excess errors)
+FAIL: gcc.dg/pr28419.c (internal compiler error)
+FAIL: gcc.dg/pr28419.c (test for excess errors)
on some targets (and under valgrind on the rest of them).
Those functions don't have the opening { and so c_parser_compound_statement
returned error_mark_node before initializing *endlocp.
So, either we can initialize it in that case too:
--- gcc/c/c-parser.c 2020-03-20 22:09:39.659411721 +0100
+++ gcc/c/c-parser.c 2020-03-21 09:36:44.455705261 +0100
@@ -5611,6 +5611,8 @@ c_parser_compound_statement (c_parser *p
if we have just prepared to enter a function body. */
stmt = c_begin_compound_stmt (true);
c_end_compound_stmt (brace_loc, stmt, true);
+ if (endlocp)
+ *endlocp = brace_loc;
return error_mark_node;
}
stmt = c_begin_compound_stmt (true);
or perhaps simpler initialize it to the function_start_locus at the
beginning and have those functions without { have function_start_locus ==
function_end_locus like the __GIMPLE functions (where propagating the
closing } seemed too difficult).
2020-03-23 Jakub Jelinek <jakub@redhat.com>
PR gcov-profile/94029
PR c/94239
* c-parser.c (c_parser_declaration_or_fndef): Initialize endloc to
the function_start_locus location. Don't do that afterwards for the
__GIMPLE body parsing.
On the following testcase we ICE because while
DECL_STRUCT_FUNCTION (current_function_decl)->function_start_locus
= c_parser_peek_token (parser)->location;
and similarly DECL_SOURCE_LOCATION (fndecl) is set from some token's
location, the end is set as:
/* Store the end of the function, so that we get good line number
info for the epilogue. */
cfun->function_end_locus = input_location;
and the thing is that input_location is only very rarely set in the C FE
(the primary spot that changes it is the cb_line_change/fe_file_change).
Which means, e.g. for pretty much all C functions that are on a single line,
function_start_locus column is > than function_end_locus column, and the
testcase even has smaller line in function_end_locus because cb_line_change
isn't performed while parsing multi-line arguments of a function-like macro.
Attached are two possible fixes to achieve what the C++ FE does, in
particular that cfun->function_end_locus is the locus of the closing } of
the function. The first one updates input_location when we see a closing }
of a compound statement (though any, not just the function body) and thus
input_location in the finish_function call is what we need.
The second instead propagates the location_t from the parsing of the
outermost compound statement (the function body) to finish_function.
The second one is this version.
2020-03-19 Jakub Jelinek <jakub@redhat.com>
PR gcov-profile/94029
* c-tree.h (finish_function): Add location_t argument defaulted to
input_location.
* c-parser.c (c_parser_compound_statement): Add endlocp argument and
set it to the locus of closing } if non-NULL.
(c_parser_compound_statement_nostart): Return locus of closing }.
(c_parser_parse_rtl_body): Likewise.
(c_parser_declaration_or_fndef): Propagate locus of closing } to
finish_function.
* c-decl.c (finish_function): Add end_loc argument, use it instead of
input_location to set function_end_locus.
* gcc.misc-tests/gcov-pr94029.c: New test.
Without the parser.c change we were ICEing on the testcase, because while the
uses of the captured vars inside of the constructs were replaced with capture
proxy decls, we didn't do that for decls in OpenMP clauses.
With that fixed, we don't ICE anymore, but the testcase is miscompiled and FAILs
at runtime. This is because the capture proxy decls have DECL_VALUE_EXPR and
during gimplification we were gimplifying those to their DECL_VALUE_EXPRs.
That is fine for shared vars, but for privatized ones we must not do that.
So that is what the cp-gimplify.c changes do. Had to add a DECL_CONTEXT check
before calling is_capture_proxy because some VAR_DECLs don't have DECL_CONTEXT
set (yet) and is_capture_proxy relies on that being non-NULL always.
2020-03-19 Jakub Jelinek <jakub@redhat.com>
PR c++/93931
* parser.c (cp_parser_omp_var_list_no_open): Call process_outer_var_ref
on outer_automatic_var_p decls.
* cp-gimplify.c (cxx_omp_disregard_value_expr): Return true also for
capture proxy decls.
* testsuite/libgomp.c++/pr93931.C: New test.
Two years ago, I've added support for up to 2 simple preparation statements
in value_replacement, but the
- && estimate_num_insns (assign, &eni_time_weights)
+ && estimate_num_insns (bb_seq (middle_bb), &eni_time_weights)
change, meant that we compute the cost of all those statements rather than
just the single assign that has been the single supported non-debug
statement in the bb before, doesn't do what I thought would do, gimple_seq
is just gimple * and thus it can't be really overloaded depending on whether
we pass a single gimple * or a whole sequence. Which means in the last
two years it doesn't count all the statements, but only the first one.
With -g that happens to be a DEBUG_STMT, or it could be e.g. the first
preparation statement which could be much cheaper than the actual assign.
2020-03-19 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94211
* tree-ssa-phiopt.c (value_replacement): Use estimate_num_insns_seq
instead of estimate_num_insns for bb_seq (middle_bb). Rename
emtpy_or_with_defined_p variable to empty_or_with_defined_p, adjust
all uses.
* gcc.dg/pr94211.c: New test.
The following testcases ICE, because they contain extern variable
declarations with incomplete enum types that is later completed and after
that those variables are accessed. The ICEs are because the vars then may have
incorrect DECL_MODE etc., e.g. in the first case the var has SImode
DECL_MODE (the guessed mode for the enum), but the enum then actually has
DImode because its enumerators don't fit into unsigned int.
The following patch fixes it by using C_TYPE_INCOMPLETE_VARS not just on
incomplete struct/union types, but also incomplete enum types.
TYPE_VFIELD can't be used as it is TYPE_MIN_VALUE on ENUMERAL_TYPE,
thankfully TYPE_LANG_SLOT_1 has been used in the C FE only on
FUNCTION_TYPEs.
2020-03-17 Jakub Jelinek <jakub@redhat.com>
PR c/94172
* c-tree.h (C_TYPE_INCOMPLETE_VARS): Define to TYPE_LANG_SLOT_1
instead of TYPE_VFIELD, and support it on {RECORD,UNION,ENUMERAL}_TYPE.
(TYPE_ACTUAL_ARG_TYPES): Check that it is only used on FUNCTION_TYPEs.
* c-decl.c (pushdecl): Push C_TYPE_INCOMPLETE_VARS also to
ENUMERAL_TYPEs.
(finish_incomplete_vars): New function, moved from finish_struct. Use
relayout_decl instead of layout_decl.
(finish_struct): Remove obsolete comment about C_TYPE_INCOMPLETE_VARS
being TYPE_VFIELD. Use finish_incomplete_vars.
(finish_enum): Clear C_TYPE_INCOMPLETE_VARS. Call
finish_incomplete_vars.
* c-typeck.c (c_build_qualified_type): Clear C_TYPE_INCOMPLETE_VARS
also on ENUMERAL_TYPEs.
* gcc.dg/pr94172-1.c: New test.
* gcc.dg/pr94172-2.c: New test.
The testcase shows some accepts-invalid (the ones without alignas) and
ice-on-invalid-code (the ones with alignas) cases.
If the enum doesn't have an underlying type and is not a definition,
the caller retries to parse it as elaborated type specifier.
E.g. for enum struct S s it will then pedwarn that elaborated type specifier
shouldn't have the struct/class keywords.
The problem is if the enum specifier is not followed by { when it has
underlying type. In that case we have already called
cp_parser_parse_definitely to end the tentative parsing started at the
beginning of cp_parser_enum_specifier. But the
cp_parser_error (parser, "expected %<;%> or %<{%>");
doesn't emit any error because the whole function is called from yet another
tentative parse and the caller starts parsing the elaborated type
specifier where the cp_parser_enum_specifier stopped (i.e. after the
underlying type token(s)). The ultimate caller than commits the tentative
parsing (and even if it wouldn't, it wouldn't know what kind of error
to report). I think after seeing enum {,struct,class} : type not being
followed by { or ;, there is no reason not to report it right away, as it
can't be valid C++, which is what the patch does. Not sure if we shouldn't
also return error_mark_node instead of NULL_TREE, so that the caller doesn't
try to parse it as elaborated type specifier (the patch doesn't do that
right now).
Furthermore, while reading the code, I've noticed that
parser->colon_corrects_to_scope_p is saved and set to false at the start
of the function, but not restored back in some cases. Don't have a testcase
where this would be a problem, but it just seems wrong. Either we can in
the two spots replace return NULL_TREE; with { type = NULL_TREE; goto out; }
or we could perhaps abuse warning_sentinel or create a special class with
dtor to clean the flag up.
And lastly, I've fixed some formatting issues in the function while reading
it.
2020-03-17 Jakub Jelinek <jakub@redhat.com>
PR c++/90995
* parser.c (cp_parser_enum_specifier): Use temp_override for
parser->colon_corrects_to_scope_p, replace goto out with return.
If scoped enum or enum with underlying type is not followed by
{ or ;, call cp_parser_commit_to_tentative_parse before calling
cp_parser_error and make sure to return error_mark_node instead of
NULL_TREE. Formatting fixes.
* g++.dg/cpp0x/enum40.C: New test.
This patch addresses two problems with TypeInfo initializer generation.
1. D array fields pointing to compiler generated data are referencing
public symbols with no unique prefix, which can lead to duplicate
definition errors in some hard to reduce cases. To avoid name clashes,
all symbols that are generated for TypeInfo initializers now use the
assembler name of the TypeInfo decl as a prefix.
2. An ICE would occur during LTO pass because these same decls are
considered to be part of the same comdat group as the TypeInfo decl that
it's referred by, despite itself being neither marked public nor comdat.
This resulted in decls being added to the LTRANS partition out of order,
triggering an assert when add_symbol_to_partition_1 attempted to add
them again. To remedy, TREE_PUBLIC and DECL_COMDAT are now set on all
generated symbols.
gcc/d/ChangeLog:
PR d/94240
* typeinfo.cc (class TypeInfoVisitor): Replace type_ field with decl_.
(TypeInfoVisitor::TypeInfoVisitor): Set decl_.
(TypeInfoVisitor::result): Update.
(TypeInfoVisitor::internal_reference): New function.
(TypeInfoVisitor::layout_string): Use internal_reference.
(TypeInfoVisitor::visit (TypeInfoTupleDeclaration *)): Likewise.
(layout_typeinfo): Construct TypeInfoVisitor with typeinfo decl.
(layout_classinfo): Likewise.
The following testcase is miscompiled in 8.x, because emit_reduc_half is
prepared to handle for 512-bit modes only i equal to 512, 256, 128 and 64.
V32HImode also needs i equal to 32 and V64QImode i equal to 32 and 16,
but emit_reduc_half in that case performs a redundant permutation exactly
like i == 32. In 9+ the testcase works because Richard in r9-3393
changed the reduc_* expanders so that they actually don't call
ix86_expand_reduc on 512-bit modes, but only 128-bit ones.
The patch fixes emit_reduc_half to handle also i of 32 and 16 similarly to
how V32QImode/V16HImode are handled for AVX2. I think it shouldn't hurt
to fix the function even on the trunk and 9 branch even when nothing uses
it ATM.
2020-04-07 Jakub Jelinek <jakub@redhat.com>
PR target/94500
* config/i386/i386.c (emit_reduc_half): For V{64QI,32HI}mode
handle i < 64 using avx512bw_lshrv4ti3. Formatting fixes.
* gcc.target/i386/avx512bw-pr94500.c: New test.
gcc/fortran/ChangeLog:
2020-04-06 Fritz Reese <foreese@gcc.gnu.org>
Backport from master
Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/93686
* decl.c (gfc_match_data): Handle data matching for derived type
pointers.
gcc/testsuite/ChangeLog:
2020-04-06 Fritz Reese <foreese@gcc.gnu.org>
Backport from master.
Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/93686
* gfortran.dg/pr93686_1.f90: New test.
* gfortran.dg/pr93686_2.f90: Likewise.
* gfortran.dg/pr93686_3.f90: Likewise.
* gfortran.dg/pr93686_4.f90: Likewise.
If we are going to use get_first_fn let's make sure we operate on
is_overloaded_fn, as the rest of the codebase does, and if lookup finds
any class-scope declaration, return early too.
PR c++/93597 - ICE with lambda in operator function.
* name-lookup.c (maybe_save_operator_binding): Check is_overloaded_fn.
* g++.dg/cpp0x/lambda/lambda-93597.C: New test.
We skip over other conversion codes when mangling expressions, we should do
the same with IMPLICIT_CONV_EXPR.
gcc/cp/ChangeLog
2020-04-04 Jason Merrill <jason@redhat.com>
PR c++/91377
* mangle.c (write_expression): Skip IMPLICIT_CONV_EXPR.
The testcase hit an ICE trying to expand a TARGET_EXPR temporary cached from
the other lambda-expression. This patch fixes this in two ways:
1) Avoid reusing a TARGET_EXPR from another function.
2) Avoid ending up with a TARGET_EXPR at all; the use of 'p' had become
<TARGET_EXPR<NON_LVALUE_EXPR<TARGET_EXPR ...>>>, which doesn't make any
sense.
gcc/cp/ChangeLog
2020-04-04 Jason Merrill <jason@redhat.com>
PR c++/94453
* constexpr.c (maybe_constant_value): Use break_out_target_exprs.
* expr.c (mark_use) [VIEW_CONVERT_EXPR]: Don't wrap a TARGET_EXPR in
NON_LVALUE_EXPR.
In this testcase, when we do a pack expansion of count_better_mins<nums>,
nums appears both in the definition of count_better_mins and as its template
argument. The intent is that we get a expansion over pairs of elements of
the pack, i.e. less<2,2>, less<2,7>, less<7,2>, .... But if we substitute
into the definition of count_better_mins when parsing the template, we end
up with sum<less<nums,nums>...>, which never gives us less<2,7>. We could
deal with this by somehow marking up the use of 'nums' as an argument for
'num', but it's simpler to mark the alias as complex, so we need to
instantiate it later with all its arguments rather than replace it early
with its expansion.
gcc/cp/ChangeLog
2020-04-03 Jason Merrill <jason@redhat.com>
PR c++/91966
* pt.c (complex_pack_expansion_r): New.
(complex_alias_template_p): Use it.
This is non-trivial but rather straightforward backport of
29f23ed79b from master. See
https://gcc.gnu.org/pipermail/gcc-patches/2020-March/542390.html for
more information.
2020-04-02 Martin Jambor <mjambor@suse.cz>
PR tree-optimization/93435
* params.def (PARAM_SRA_MAX_PROPAGATIONS): New parameter.
* tree-sra.c (propagation_budget): New variable.
(budget_for_propagation_access): New function.
(propagate_subaccesses_across_link): Use it.
(propagate_all_subaccesses): Set up and destroy propagation_budget.
* doc/invoke.texi (sra-max-propagations): New.
testsuite/
* gcc.dg/tree-ssa/pr93435.c: New test.
It should be valid to use std::to_address on a past-the-end iterator,
but the debug mode iterators do a check for dereferenceable in their
operator->(). That check is generally useful, so rather than remove it
this changes std::__to_address to identify a debug mode iterator and
use base().operator->() to skip the check.
Backport from mainline
2020-04-03 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/93960
* include/bits/ptr_traits.h (__to_address): Add special case for debug
iterators, to avoid dereferenceable check.
* testsuite/20_util/to_address/1_neg.cc: Adjust dg-error line number.
* testsuite/20_util/to_address/debug.cc: New test.
Backport from mainline
2020-04-03 Martin Liska <mliska@suse.cz>
PR ipa/94445
* ipa-icf-gimple.c (func_checker::compare_gimple_call):
Compare type attributes for gimple_call_fntypes.
2020-04-02 Fritz Reese <foreese@gcc.gnu.org>
Backport from master.
2020-04-02 Fritz Reese <foreese@gcc.gnu.org>
PR fortran/85982
* fortran/decl.c (match_attr_spec): Lump COMP_STRUCTURE/COMP_MAP into
attribute checking used by TYPE.
2020-04-02 Fritz Reese <foreese@gcc.gnu.org>
Backport from master.
2020-04-02 Fritz Reese <foreese@gcc.gnu.org>
PR fortran/85982
* gfortran.dg/dec_structure_28.f90: New test.
VN currently replaces a load of a 16 byte entity 128 bits of precision
(TImode) with the result of a load of a 16 byte entity with 80 bits of
mode precision (XFmode). That will go downhill since if the padding
bits are not actually filled with memory contents those bits are
missing.
2020-03-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/94103
* tree-ssa-sccvn.c (visit_reference_op_load): Avoid type
punning when the mode precision is not sufficient.
* gcc.target/i386/pr94103.c: New testcase.
This makes sure that the store a memset is folded to uses a type
covering all bits.
2020-03-18 Richard Biener <rguenther@suse.de>
PR middle-end/94206
* gimple-fold.c (gimple_fold_builtin_memset): Avoid using
partial int modes or not mode-precision integer types for
the store.
* gcc.dg/torture/pr94206.c: New testcase.
The following testcase ICEs, because aarch64_gen_compare_reg_maybe_ze emits
invalid RTL.
For y_mode [QH]Imode it expects y to be of that mode (or CONST_INT that fits
into that mode) and x being SImode; for non-CONST_INT y it zero extends y
into SImode and compares that against x, for CONST_INT y it zero extends y
into SImode. The problem is that when the zero extended constant isn't
usable directly, it forces it into a REG, but with y_mode mode, and then
compares against y. That is wrong, because it should force it into a SImode
REG and compare that way.
2020-04-02 Jakub Jelinek <jakub@redhat.com>
PR target/94435
* config/aarch64/aarch64.c (aarch64_gen_compare_reg_maybe_ze): For
y_mode E_[QH]Imode and y being a CONST_INT, change y_mode to SImode.
* gcc.target/aarch64/pr94435.c: New test.
ICE occurs when findloc is used with character arguments of different
kinds. If the character kinds are different reject the code.
Original patch provided by Steven G. Kargl <kargl@gcc.gnu.org>.
gcc/fortran/ChangeLog:
Backport from master
Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/93498
* check.c (gfc_check_findloc): If the kinds of the arguments
differ goto label "incompat".
gcc/testsuite/ChangeLog:
Backport from master
2020-04-02 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93498
* gfortran.dg/pr93498_1.f90: New test.
* gfortran.dg/pr93498_2.f90: New test.
Deferred size arrays can not be used in equivalance statements.
gcc/fortran/ChangeLog:
Backport from master
2020-04-02 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/94030
* resolve.c (resolve_equivalence): Correct formatting
around the label "identical_types". Instead of using
gfc_resolve_array_spec use is_non_constants_shape_array
to determine whether the array can be used in a in an
equivalence statement.
gcc/testsuite/ChangeLog:
Backport from master
2020-04-02 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/94030
* gfortran.dg/pr94030_1.f90
* gfortran.dg/pr94030_2.f90
2020-04-01 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Backport from mainline
2020-03-31 Jakub Jelinek <jakub@redhat.com>
PR target/94368
* config/aarch64/constraints.md (Uph): New constraint.
* config/aarch64/atomics.md (cas_short_expected_imm): New mode attr.
(@aarch64_compare_and_swap<mode>): Use it instead of n in operand 2's
constraint.
* gcc.dg/pr94368.c: New test.
2020-04-01 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Backport from mainline
2019-09-25 Richard Henderson <richard.henderson@linaro.org>
PR target/91834
* config/aarch64/lse.S (LDNM): Ensure STXR output does not
overlap the inputs.
This is the libgcc part of the interface -- providing the functions.
Rationale is provided at the top of libgcc/config/aarch64/lse.S.
2020-04-01 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Backport from mainline
2019-09-19 Richard Henderson <richard.henderson@linaro.org>
* config/aarch64/lse-init.c: New file.
* config/aarch64/lse.S: New file.
* config/aarch64/t-lse: New file.
* config.host: Add t-lse to all aarch64 tuples.
2020-04-01 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Backport from mainline
2019-09-19 Richard Henderson <richard.henderson@linaro.org>
* config/aarch64/aarch64 (aarch64_split_compare_and_swap): Disable
strong_zero_p for aarch64_track_speculation; unify some code paths;
use aarch64_gen_compare_reg instead of open-coding.
2020-04-01 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
Backport from mainline
2019-09-19 Richard Henderson <richard.henderson@linaro.org>
* config/aarch64/aarch64.c (aarch64_gen_compare_reg): Add support
for NE comparison of TImode values.
(aarch64_emit_load_exclusive): Add support for TImode.
(aarch64_emit_store_exclusive): Likewise.
(aarch64_split_compare_and_swap): Disable strong_zero_p for TImode.
* config/aarch64/atomics.md (@atomic_compare_and_swap<ALLI_TI>):
Change iterator from ALLI to ALLI_TI.
(@atomic_compare_and_swap<JUST_TI>): New.
(@atomic_compare_and_swap<JUST_TI>_lse): New.
(aarch64_load_exclusive_pair): New.
(aarch64_store_exclusive_pair): New.
* config/aarch64/iterators.md (JUST_TI): New.
The resolution of CWG issue 1321 clarified that when deciding whether two
expressions involving template parameters are equivalent, two dependent
function calls where the function is named with an unqualified-id are
considered to be equivalent if the name is the same, even if unqualified
lookup finds different sets of functions. We were wrongly treating
qualified-ids the same way, so that EXISTS and test::EXISTS were considered
to be equivalent even though they are looking up the name in different
scopes. This also causes a mangling bug, but I don't think it's safe to fix
that for GCC 10; this patch just fixes the comparison.
gcc/cp/ChangeLog
2020-03-30 Jason Merrill <jason@redhat.com>
PR c++/90711
* tree.c (cp_tree_equal) [CALL_EXPR]: Compare KOENIG_LOOKUP_P.
(called_fns_equal): Check DECL_CONTEXT.
2020-03-31 Carl Love <cel@us.ibm.com>
backport of mainline commit
commit 68dd57808f
Author: Carl Love <carll@us.ibm.com>
Date: Fri Mar 20 18:15:05 2020 -0500
whith change log typo fixed.
PR target/87583
* gcc/config/rs6000/rs6000.c (rs6000_option_override_internal):
Add check for TARGET_FPRND for Power 7 or newer.
Backport from mainline
2020-03-28 Tobias Burnus <tobias@codesourcery.com>
PR fortran/94348
* decl.c (gfc_match_submod_proc): Add result var to the
proc's namespace.
PR fortran/94348
* gfortran.dg/module_procedure_3.f90: New.
Using undeclared symbol k in an expression in the following
array constructor results in an ICE:
print *, [real(x(k))]
If the call to the intrinsic is not in a constructor a no IMPLICIT
type error is reported and the ICE does not occur.
Matching on an expression instead of an initialisation express an
and not converting a MATCH_ERROR return value into MATCH_NO results
in the no IMPLICIT error and no ICE.
Note: Steven G. Kargl <kargl@gcc.gnu.org> is the author of the
changes except for the test cases.
gcc/fortran/ChangeLog:
Backport from master
2020-03-25 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93484
* match.c (gfc_match_type_spec): Replace gfc_match_init_expr with
gfc_match_expr. Return m if m is MATCH_NO or MATCH_ERROR.
gcc/testsuite
Backport from master
2020-03-25 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93484
* gfortran.dg/pr93484_1.f90: New test.
* gfortran.dg/pr93484_2.f90: New test.
This patch is to apply the same fix as r267528 to another similar case
bb-slp-over-widen-2.c which requires misaligned vector access.
gcc/testsuite/ChangeLog
2020-03-25 Kewen Lin <linkw@gcc.gnu.org>
Backport from master
2020-03-13 Kewen Lin <linkw@gcc.gnu.org>
PR testsuite/93935
* gcc.dg/vect/bb-slp-over-widen-2.c: Expect basic block vectorized
messages only on vect_hw_misalign targets.
This works around an ICE in reload where from expand we get the following RTL
generated for VSTRUCT mode writes:
(insn 446 354 445 2 (set (reg:CI 383)
(subreg:CI (reg:V4SI 291) 0)) "small.i":146:22 3408 {*aarch64_movci}
(nil))
This sequence is trying to say two things:
1) liveliness: It's trying to say that eventually the whole CI reg will be
written to. It does this by generating the paradoxical subreg.
2) write data: It's trying to in the same instruction also write the V4SI mode
component at offset 0 in the CI reg.
This patch fixes it by in the backend when we see such a paradoxical
construction breaking it apart and issuing a clobber to correct the liveliness
information and then emitting a normal subreg write for the component that the
paradoxical subreg was trying to write to.
Concretely we generate this:
(insn 42 41 43 (clobber (reg/v:CI 122 [ diD.5226 ])) "small.i":121:23 -1
(nil))
(insn 43 42 44 (set (subreg:V4SI (reg/v:CI 122 [ diD.5226 ]) 0)
(reg:V4SI 136)) "small.i":121:23 -1
(nil))
gcc/ChangeLog:
PR target/94052
* config/aarch64/aarch64-simd.md (mov<mode>): Remove paradoxical
subregs of VSTRUCT modes.
gcc/testsuite/ChangeLog:
PR target/94052
* g++.target/aarch64/pr94052.C: New test.
Function loop_distribution::break_alias_scc_partitions needs to compute
SCC with runtime alias edges skipped. As a result, partitions could be
re-assigned larger post order number than SCC's precedent partition and
distributed before the precedent one. This fixes the issue by updating
the merged partition to the minimal post order in SCC.
Backport from mainline.
PR tree-optimization/94125
* tree-loop-distribution.c
(loop_distribution::break_alias_scc_partitions): Update post order
number for merged scc.
* gcc.dg/tree-ssa/pr94125.c: New test.
When we use an assembler that supports " .long XX@GOTOFF", the current
combination of configuration parameters and conditional compilation
(when building an i686-darwin compiler with mdynamic-no-pic) assume that
it's OK to put jump tables in the .const section.
However, when we encounter a weak function with a jump table, this
produces relocations that directly access the weak symbol section from
the .const section - which is deemed illegal by the linker (since that
would mean that the weak symbol could not be replaced).
Arguably, this is a limitation (maybe even a bug) in the linker - but
it seems that we'd have to change the ABI to fix it - since it would
require some annotation (maybe just using a special section for the
jump tables) to tell the linker that this specific circumstance is OK
because the direct access to the weak symbol can only occur from that
symbol itself.
The fix is to force jump tables into the text section for all X86 Darwin
versions (PIC code already had this change).
gcc/ChangeLog:
2020-03-23 Iain Sandoe <iain@sandoe.co.uk>
Backport from master.
2020-03-22 Iain Sandoe <iain@sandoe.co.uk>
* config/i386/darwin.h (JUMP_TABLES_IN_TEXT_SECTION): Remove
references to Darwin.
* config/i386/i386.h (JUMP_TABLES_IN_TEXT_SECTION): Define this
unconditionally and comment on why.
Backport from mainline
2020-01-13 Jonathan Wakely <jwakely@redhat.com>
PR driver/92757
* doc/invoke.texi (Warning Options): Add caveat about some warnings
depending on optimization settings.
PR93709 mentioned regressions on maxlocval_4.f90 and minlocval_f.f90 which
relates to max of '-inf' and 'nan'. This regression occur on P9 because
P9 new instruction 'xsmaxcdp' is generated.
And for C code `a < b ? b : a` is also generated as `xsmaxcdp` under -O2
for P9. While this instruction behavior more like C/C++ semantic (a>b?a:b).
In GCC9, the issue also occur as the new test case shows.
This generates prevents 'xsmaxcdp' to be generated for those cases.
'xsmincdp' also is handled in patch.
gcc/
2020-03-19 Jiufu Guo <guojiufu@linux.ibm.com>
PR target/93709
* gcc/config/rs6000/rs6000.c (rs6000_emit_p9_fp_minmax): Check
NAN and SIGNED_ZEROR for smax/smin.
gcc/testsuite
2020-03-19 Jiufu Guo <guojiufu@linux.ibm.com>
PR target/93709
* gcc.target/powerpc/p9-minmax-3.c: New test.
The following testcase FAILs with -O2 -fcompare-debug, but the reason isn't
that we'd emit different code based on -g or non-debug, but rather that
we emit different code depending on whether -w is used or not (or e.g.
-Wno-stringop-overflow or whether some other pass emitted some other warning
already on the call).
Code generation shouldn't depend on whether we emit a warning or not if at
all possible.
The following patch punts (i.e. doesn't optimize the strnlen call to a
constant value) if we would emit the warning if it was enabled.
In the PR there is an alternate patch which does optimize the strnlen call
no matter if we emit the warning or not, though I think I prefer the version
below, e.g. the strnlen call might be crossing field boundaries, which is in
strict reading undefined, but I'd be afraid people do that in the real
world programs.
2020-03-17 Jakub Jelinek <jakub@redhat.com>
PR middle-end/94189
* builtins.c (expand_builtin_strnlen): Do return NULL_RTX if we would
emit a warning if it was enabled and don't depend on TREE_NO_WARNING
for code-generation.
* gcc.dg/pr94189.c: New test.
The following testcase fails with -fcompare-debug. The problem is that
bar is marked as address_taken only with -g and not without.
I've tracked it down to insert_init_stmt calling gimple_regimplify_operands
even on DEBUG_STMTs. That function will just insert normal stmts before
the DEBUG_STMT if the DEBUG_STMT operand isn't gimple val or invariant.
While DCE will turn those statements into debug temporaries, it can cause
differences in SSA_NAMEs and more importantly, the ipa references are
generated from those before the DCE happens.
On the testcase, the DEBUG_STMT value is (int)bar.
We could generate DEBUG_STMTs with debug temporaries instead, but I fail to
see the reason to do that, DEBUG_STMTs allow other expressions and all we
want to ensure is that the expressions aren't too large (arbitrarily
complex), but during inlining/function versioning I don't see why something
would queue a DEBUG_STMT with arbitrarily complex expressions in there.
2020-03-16 Jakub Jelinek <jakub@redhat.com>
PR debug/94167
* tree-inline.c (insert_init_stmt): Don't gimple_regimplify_operands
DEBUG_STMTs.
* gcc.dg/pr94167.c: New test.
> I'm getting this ICE with -mabi=ilp32:
>
> during RTL pass: fwprop1
> /opt/gcc/gcc-20200312/gcc/testsuite/gcc.dg/pr94121.c: In function 'bar':
> /opt/gcc/gcc-20200312/gcc/testsuite/gcc.dg/pr94121.c:16:1: internal compiler error: in decompose, at rtl.h:2279
That is a preexisting issue, caused by another bug in the same function.
When mode is SImode and moffset is 0x80000000 (or anything else with the
bit 31 set), we need to sign-extend it.
2020-03-13 Jakub Jelinek <jakub@redhat.com>
PR target/94121
* config/aarch64/aarch64.c (aarch64_add_offset_1): Use gen_int_mode
instead of GEN_INT.
When looking into PR94134, I've noticed bugs in the
ASM_OUTPUT_ALIGNED_DECL_LOCAL documentation. varasm.c has:
#if defined ASM_OUTPUT_ALIGNED_DECL_LOCAL
unsigned int align = symtab_node::get (decl)->definition_alignment ();
ASM_OUTPUT_ALIGNED_DECL_LOCAL (asm_out_file, decl, name,
size, align);
return true;
#elif defined ASM_OUTPUT_ALIGNED_LOCAL
unsigned int align = symtab_node::get (decl)->definition_alignment ();
ASM_OUTPUT_ALIGNED_LOCAL (asm_out_file, name, size, align);
return true;
#else
ASM_OUTPUT_LOCAL (asm_out_file, name, size, rounded);
return false;
#endif
and the ASM_OUTPUT_ALIGNED_LOCAL documentation properly mentions:
Like @code{ASM_OUTPUT_LOCAL} and mentions the same macro in another place.
The ASM_OUTPUT_ALIGNED_DECL_LOCAL description mentions non-existing macros
ASM_OUTPUT_ALIGNED_DECL and ASM_OUTPUT_DECL instead of the right ones
ASM_OUTPUT_ALIGNED_LOCAL and ASM_OUTPUT_LOCAL.
2020-03-12 Jakub Jelinek <jakub@redhat.com>
* doc/tm.texi.in (ASM_OUTPUT_ALIGNED_DECL_LOCAL): Change
ASM_OUTPUT_ALIGNED_DECL in description to ASM_OUTPUT_ALIGNED_LOCAL
and ASM_OUTPUT_DECL to ASM_OUTPUT_LOCAL.
* doc/tm.texi: Regenerated.
As the testcase shows, if DSE decides to head trim {mem{set,cpy,move},strncpy}
and the call has lhs, it is incorrect to leave the lhs as is, because it
will then point to the adjusted address (base + head_trim) instead of the
original base.
The following patch fixes that by dropping the lhs of the call and assigning
lhs the original base in a following statement.
2020-03-12 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94130
* tree-ssa-dse.c: Include gimplify.h.
(increment_start_addr): If stmt has lhs, drop the lhs from call and
set it after the call to the original value of the first argument.
Formatting fixes.
(decrement_count): Formatting fix.
* gcc.c-torture/execute/pr94130.c: New test.
As mentioned in the PR, the generic code decides to put the a variable into
lcomm_section, which is a NOSWITCH section and thus the generic code doesn't
switch into a particular section before using
ASM_OUTPUT{_ALIGNED{,_DECL}_}_LOCAL, on many targets that results just in
.lcomm (or for non-local .comm) directives which don't need a switch to some
section, other targets put switch_to_section (bss_section) at the start of
that macro.
pdp11 doesn't do that (and doesn't have bss_section), and so emits the
lcomm/comm variables in whatever section is current (it has only .text/.data
and for DEC assembler rodata).
The following patch fixes that by putting it always into data section, and
additionally avoids emitting an empty line in the assembly for the lcomm
vars.
2020-03-11 Jakub Jelinek <jakub@redhat.com>
PR target/94134
* config/pdp11/pdp11.c (pdp11_asm_output_var): Call switch_to_section
at the start to switch to data section. Don't print extra newline if
.globl directive has not been emitted.
* gcc.c-torture/execute/pr94134.c: New test.
abs_hwi asserts that the argument is not HOST_WIDE_INT_MIN and as the
(invalid) testcase shows, the function can be called with such an offset.
The following patch is IMHO minimal fix, absu_hwi unlike abs_hwi allows even
that value and will return (unsigned HOST_WIDE_INT) HOST_WIDE_INT_MIN
in that case. The function then uses moffset in two spots which wouldn't
care if the value is (unsigned HOST_WIDE_INT) HOST_WIDE_INT_MIN or
HOST_WIDE_INT_MIN and wouldn't accept it (!moffset and
aarch64_uimm12_shift (moffset)), then in one spot where the signedness of
moffset does matter and using unsigned is the right thing -
moffset < 0x1000000 - and finally has code which will handle even this
value right; the assembler doesn't really care for DImode immediates if
mov x1, -9223372036854775808
or
mov x1, 9223372036854775808
is used and similarly it doesn't matter if we add or sub it in DImode.
2020-03-11 Jakub Jelinek <jakub@redhat.com>
PR target/94121
* config/aarch64/aarch64.c (aarch64_add_offset_1): Use absu_hwi
instead of abs_hwi, change moffset type to unsigned HOST_WIDE_INT.
* gcc.dg/pr94121.c: New test.
As e.g. decimal_from_decnumber shows, the REAL_VALUE_TYPE representation
contains a decimal128 embedded in ->sig only if it is rvc_normal, for
other kinds like rvc_inf or rvc_nan, ->sig is ignored and everything is
contained in the REAL_VALUE_TYPE flags (cl, sign, signalling and decimal).
decimal_to_binary which is used when folding a decimal{32,64,128} constant
to a binary floating point type ignores this and thus folds infinities and
NaNs into +0.0.
The following patch fixes that by only doing that for rvc_normal.
Similarly to the binary to decimal folding, it goes through a string, in
order to e.g. deal with canonical NaN mantissas, or binary float formats
that don't support infinities and/or NaNs.
2020-03-11 Jakub Jelinek <jakub@redhat.com>
PR middle-end/94111
* dfp.c (decimal_to_binary): Only use decimal128ToString if from->cl
is rvc_normal, otherwise use real_to_decimal to print the number to
string.
* gcc.dg/dfp/pr94111.c: New test.
As the testcase shows, arithmetics that for -ftrapv would need multiple
basic blocks can show up not just in nb_bytes expressions where we
are calling rewrite_to_non_trapping_overflow for a while already,
but also in the pointer expression to the start of the region.
While the testcase covers just the first hunk and I've failed to create
a testcase for the latter, it is at least in theory possible too, so I've
adjusted that hunk too.
2020-03-11 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94114
* tree-loop-distribution.c (generate_memset_builtin): Call
rewrite_to_non_trapping_overflow even on mem.
(generate_memcpy_builtin): Call rewrite_to_non_trapping_overflow even
on dest and src.
* gcc.dg/pr94114.c: New test.
The following testcase fails to assemble, as CONST_STRING in the DEBUG_INSNs
is printed as is, so if it contains \n and/or \r, we are in trouble:
.loc 1 14 3
# DEBUG haystack => [si]
# DEBUG needle => "
"
In the gimple dumps we print those (STRING_CSTs) as
# DEBUG haystack => D#1
# DEBUG needle => "\n"
so this patch uses what we use in tree printing for the CONST_STRINGs too.
2020-03-05 Jakub Jelinek <jakub@redhat.com>
PR middle-end/93399
* tree-pretty-print.h (pretty_print_string): Declare.
* tree-pretty-print.c (pretty_print_string): Remove forward
declaration, no longer static. Change nbytes parameter type
from unsigned to size_t.
* print-rtl.c (print_value) <case CONST_STRING>: Use
pretty_print_string and for shrink way too long strings.
* gcc.dg/pr93399.c: New test.
In the following testcase we emit wrong debug info for the karg
parameter in the DW_TAG_inlined_subroutine into main.
The problem is that the karg PARM_DECL is DECL_BY_REFERENCE and thus
in the IL has const K & type, but in the source just const K.
When the function is inlined, we create a VAR_DECL for it, but don't
set DECL_BY_REFERENCE, so when emitting DW_AT_location, we treat it like
a const K & typed variable, but it has DW_AT_abstract_origin which has
just the const K type and thus the debugger thinks the variable has
const K type.
Fixed by copying the DECL_BY_REFERENCE flag. Not doing it in
copy_decl_for_dup_finish, because copy_decl_no_change already copies
that flag through copy_node and in copy_result_decl_to_var it is
undesirable, as we handle DECL_BY_REFERENCE in that case instead
by changing the type.
2020-03-04 Jakub Jelinek <jakub@redhat.com>
PR debug/93888
* tree-inline.c (copy_decl_to_var): Copy DECL_BY_REFERENCE flag.
* g++.dg/guality/pr93888.C: New test.
When a function returns void or the return value is ignored, ass_var
is NULL_TREE. The tail recursion handling generally assumes DCE has been
performed and so doesn't expect to encounter useless assignments after the
call and expects them to be part of the return value adjustment that need
to be changed into tail recursion additions/multiplications.
process_assignment does some verification and has a way to tell the caller
to try to move dead or whatever other stmts that don't participate in the
return value modifications before it is returned.
For binary rhs assignments it is just fine, neither op0 nor op1 will be
NULL_TREE and thus if *ass_var is NULL_TREE, it will not match, but unary
rhs is handled by only setting op0 to rhs1 and setting op1 to NULL_TREE.
And at this point, NULL_TREE == NULL_TREE and thus we think e.g. the
c_2 = -e_3(D);
dead stmt is actually a return value modification, so we queue it as
multiplication and then create a void type SSA_NAME accumulator for it
and ICE shortly after.
Fixed by making sure op1 == *ass_var comparison is done only if *ass_var.
2020-03-04 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/94001
* tree-tailcall.c (process_assignment): Before comparing op1 to
*ass_var, verify *ass_var is non-NULL.
* gcc.dg/pr94001.c: New test.
As PR94019 shows, without misaligned vector access support but with
realign load, the vectorized loop will end up with realign scheme.
It generates mask (control vector) with return type vector signed
char which breaks the not check.
gcc/testsuite/ChangeLog
2020-03-17 Kewen Lin <linkw@gcc.gnu.org>
Backport from master
2020-03-09 Kewen Lin <linkw@gcc.gnu.org>
PR testsuite/94019
* gcc.dg/vect/vect-over-widen-17.c: Don't expect vector char if it's
without misaligned vector access support.
As PR94023 shows, the expected SLP requires misaligned vector access
support. This patch is to guard the check under the target condition
vect_hw_misalign to ensure that.
2020-03-17 Kewen Lin <linkw@gcc.gnu.org>
Backport from master
2020-03-09 Kewen Lin <linkw@gcc.gnu.org>
PR testsuite/94023
* gcc.dg/vect/slp-perm-12.c: Expect loop vectorized messages only on
vect_hw_misalign targets.
The service_already_exists exception type specified in the TS doesn't
have any constructors defined. Since its base class isn't default
constructible, that means has no usable constructors. This may be a
defect in the TS.
This patch fixes it by adding a default constructor, but making it
private. The make_service function is declared as a friend to be able to
call that private constructor.
Backport from mainline
2020-03-16 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/94199
* include/experimental/executor (service_already_exists): Add default
constructor. Declare make_service to be a friend.
* testsuite/experimental/net/execution_context/make_service.cc: New
test.
find_parameter_packs_r doesn't look through typedefs, which is normally
correct, but that means we need to handle their declarations specially.
gcc/cp/ChangeLog
2020-03-14 Jason Merrill <jason@redhat.com>
PR c++/92909
* pt.c (find_parameter_packs_r): [DECL_EXPR]: Walk
DECL_ORIGINAL_TYPE of a typedef.
Here the template arguments for the partial specialization are valid
arguments for the template, but not for a partial specialization, because
'd' can never be deduced to anything other than an empty pack.
gcc/cp/ChangeLog
2020-03-14 Jason Merrill <jason@redhat.com>
PR c++/92068
* pt.c (process_partial_specialization): Error rather than crash on
extra pack expansion.
When cp_unevaluated_operand is set, tsubst_decl thinks that if it sees a
PARM_DECL that isn't already in local_specializations, we're in a decltype
in a trailing return type or some such, and so we only want a substitution
for a single PARM_DECL. In this case, we want the whole chain, so make sure
cp_unevaluated_operand is cleared.
gcc/cp/ChangeLog
2020-03-14 Jason Merrill <jason@redhat.com>
PR c++/93248
* pt.c (build_deduction_guide): Clear cp_unevaluated_operand for
substituting DECL_ARGUMENTS.
This avoids HWI -> unsigned truncation to end up with zero alignment
which set_ptr_info_alignment ICEs on.
2020-03-13 Richard Biener <rguenther@suse.de>
PR tree-optimization/94163
* tree-ssa-pre.c (create_expression_by_pieces): Check
whether alignment would be zero.
The issue is that relax_delay_slots can streamline the CFG in some cases,
in particular remove BARRIERs, but removing BARRIERs changes the way the
instructions are associated with (basic) blocks by the liveness analysis
code in resource.c (find_basic_block) and thus can cause entries in the
cache maintained by resource.c to become outdated, thus producing wrong
answers downstream.
The fix is to invalidate the cache entries affected by the removal of
BARRIERs in relax_delay_slots, i.e. for the instructions down to the
next BARRIER.
PR rtl-optimization/94119
* resource.h (clear_hashed_info_until_next_barrier): Declare.
* resource.c (clear_hashed_info_until_next_barrier): New function.
* reorg.c (add_to_delay_list): Fix formatting.
(relax_delay_slots): Call clear_hashed_info_until_next_barrier on
the next instruction after removing a BARRIER.
PR87560 reports an ICE when a test case is compiled with -mpower9-vector
and -mno-altivec. This patch terminates compilation with an error when
this combination (and other unreasonable ones) are requested.
Bootstrapped and tested on powerpc64le-unknown-linux-gnu with no
regressions. Reported error is now:
f951: Error: '-mno-altivec' turns off '-mpower9-vector'
2020-03-12 Bill Schmidt <wschmidt@linux.ibm.com>
Backport from master
2020-03-02 Bill Schmidt <wschmidt@linux.ibm.com>
PR target/87560
* rs6000-cpus.def (OTHER_ALTIVEC_MASKS): New #define.
* rs6000.c (rs6000_disable_incompatible_switches): Add table entry
for OPTION_MASK_ALTIVEC.
The filesystem::path::operator+= and filesystem::path::concat functions
operate directly on the native format of the path and so can cause a
path to mutate to a completely different type.
For Windows combining a filename "x" with a filename ":" produces a
root-name "x:". Similarly, a Cygwin root-directory "/" combined with a
root-directory and filename "/x" produces a root-name "//x".
Before this patch the implemenation didn't support those kind of
mutations, assuming that concatenating two filenames would always
produce a filename and concatenating with a root-dir would still have a
root-dir.
This patch fixes it simply by checking for the problem cases and
creating a new path by re-parsing the result of the string
concatenation. This is slightly suboptimal because the argument has
already been parsed if it's a path, but more importantly it doesn't
reuse any excess capacity that the path object being modified might
already have allocated.
Backport from mainline
2020-03-09 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/94063
* src/c++17/fs_path.cc (path::operator+=(const path&)): Add kluge to
handle concatenations that change the type of the first component.
(path::operator+=(basic_string_view<value_type>)): Likewise.
* testsuite/27_io/filesystem/path/concat/94063.cc: New test.
The macro that is defined is _GLIBCXX_NOT_FN_CALL_OP but the macro that
was named in the #undef directive was _GLIBCXX_NOT_FN_CALL. This fixes
the #undef.
Backport from mainline
2020-02-04 Jonathan Wakely <jwakely@redhat.com>
* include/std/functional (_GLIBCXX_NOT_FN_CALL_OP): Un-define after
use.
This test fails in the Fedora RPM build (but not elsewhere, for unknown
reasons). The warning is correct, we're passing a null pointer.
Backport from mainline
2020-03-12 Jonathan Wakely <jwakely@redhat.com>
* testsuite/tr1/8_c_compatibility/cstdlib/functions.cc: Do not pass
a null pointer to functions with nonnull(1) attribute.
These tests were failing on XFS because it doesn't support setting file
timestamps past 2038, so the expected overflow when reading back a huge
timestamp into a file_time_type didn't happen.
Additionally, the std::filesystem::file_time_type::clock has an
epoch that is out of range of 32-bit time_t so testing times around that
epoch may also fail.
This fixes the tests to give up gracefully if the filesystem doesn't
support times that can't be represented in 32-bit time_t.
Backport from mainline
2020-02-28 Jonathan Wakely <jwakely@redhat.com>
* testsuite/27_io/filesystem/operations/last_write_time.cc: Fixes for
filesystems that silently truncate timestamps.
* testsuite/experimental/filesystem/operations/last_write_time.cc:
Likewise.
Backport from mainline
2020-01-13 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/93244
* include/bits/fs_path.h (path::generic_string<C,A>)
[_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Convert root-dir to forward-slash.
* testsuite/27_io/filesystem/path/generic/generic_string.cc: Check
root-dir is converted to forward slash in generic pathname.
* testsuite/27_io/filesystem/path/generic/utf.cc: New test.
* testsuite/27_io/filesystem/path/generic/wchar_t.cc: New test.
The peephole that detects a mov of one register to another followed by
a comparison of the original register against zero is only used in Arm
state; but the instruction that matches this is generic to all 32-bit
compilation states. That instruction lacks support for SP which is
permitted in Arm state, but has restrictions in Thumb2 code.
This patch fixes the problem by allowing SP when in ARM state for all
registers; in Thumb state it allows SP only as a source when the
register really is copied to another target.
gcc/ChangeLog:
PR target/91913
Backport from master
* config/arm/arm.md (movsi_compare0): Allow SP as a source register
in Thumb state and also as a destination in Arm state. Add T16
variants.
gcc/testsuite/ChangeLog:
2020-02-10 Jakub Jelinek <jakub@redhat.com>
PR target/91913
Backport from master
* gfortran.dg/pr91913.f90: New test.
Backport from mainline
2020-03-09 Martin Liska <mliska@suse.cz>
PR target/93800
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Remove set of str_align_loops and str_align_jumps as these
should be set in previous 2 conditions in the function.
Backport from mainline
2020-03-09 Martin Liska <mliska@suse.cz>
PR target/93800
* gcc.target/powerpc/pr93800.c: New test.
If the type is derived in the current compilation unit, and Allocate
is not overridden on derivation (as is typically the case with
Root_Storage_Pool_With_Subpools), the entity for Allocate of the
derived type is an alias for System.Storage_Pools.Subpools.Allocate.
The main assertion in gnat_to_gnu_entity fails in this case, since
this is not a definition and Is_Public is false (since the entity
is nested in the same compilation unit).
2020-03-11 Richard Wai <richard@annexi-strayline.com>
* gcc-interface/decl.c (gnat_to_gnu_entity): Also test Is_Public on
the Alias of the entitiy, if is present, in the main assertion.
Backport the patch to fix failures on P9 and P8BE, P7LE for PR94036.
Tested pass on P9/P8/P7.
(gcc-8 is not needed as the test doesn't exists.)
P9LE generated instruction is not worse than P8LE.
mtvsrdd;xxlnot;stxv vs. not;not;std;std.
It can have longer latency, but latency via memory is not so critical,
and this does save decode and other resources. It's hard to choose
which is best. Update the test case to fix failures.
gcc/testsuite/ChangeLog:
2020-03-10 Luo Xiong Hu <luoxhu@linux.ibm.com>
backport from master.
PR testsuite/94036
2019-12-02 Luo Xiong Hu <luoxhu@linux.ibm.com>
PR testsuite/92398
* gcc.target/powerpc/pr72804.c: Split the store function to...
* gcc.target/powerpc/pr92398.h: ... this one. New.
* gcc.target/powerpc/pr92398.p9+.c: New.
* gcc.target/powerpc/pr92398.p9-.c: New.
* lib/target-supports.exp (check_effective_target_p8): New.
(check_effective_target_p9+): New.
When the target doesn't define PTHREAD_RWLOCK_INITIALIZER we use a
wrapper around pthread_wrlock_init, but the wrapper only takes one
argument and we try to call it with two.
This went unnnoticed on most targets because they do define the
PTHREAD_RWLOCK_INITIALIZER macro, but it causes a bootstrap failure on
darwin8.
Backport from mainline
2020-03-06 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/94069
* include/std/shared_mutex [!PTHREAD_RWLOCK_INITIALIZER]
(__shared_mutex_pthread::__shared_mutex_pthread()): Remove incorrect
second argument to __glibcxx_rwlock_init.
* testsuite/30_threads/shared_timed_mutex/94069.cc: New test.
This was simple enough to backport even though it's concepts.
gcc/cp/ChangeLog
2020-03-05 Jason Merrill <jason@redhat.com>
PR c++/88395
PR c++/93551
* constraint.cc (constraints_satisfied_p): Use push_tinst_level.
As the testcases show, the macros we have for -O0 for intrinsics that require
constant argument(s) should first cast the argument to the type the -O1+
inline uses and afterwards to whatever type e.g. a builtin needs.
The PR reported one which violated this, and I've grepped for all double-casts
and grepped out from that meaningful casts where the __m{128,256,512}{,d,i}
first cast is cast to same sized __v* type and has the same kind of element
type (float, double, integral). These 7 macros were using different casts,
and I've double checked them against the inline function types.
2020-03-05 Jakub Jelinek <jakub@redhat.com>
PR target/94046
* config/i386/avx2intrin.h (_mm_mask_i32gather_ps): Fix first cast of
SRC and MASK arguments to __m128 from __m128d.
(_mm256_mask_i32gather_ps): Fix first cast of MASK argument to __m256
from __m256d.
(_mm_mask_i64gather_ps): Fix first cast of MASK argument to __m128
from __m128d.
* config/i386/xopintrin.h (_mm_permute2_pd): Fix first cast of C
argument to __m128i from __m128d.
(_mm256_permute2_pd): Fix first cast of C argument to __m256i from
__m256d.
(_mm_permute2_ps): Fix first cast of C argument to __m128i from __m128.
(_mm256_permute2_ps): Fix first cast of C argument to __m256i from
__m256.
* g++.target/i386/pr94046-1.C: New test.
* g++.target/i386/pr94046-2.C: New test.
There's a -Wunused-but-set-variable warning in operations/all.cc which
can be fixed with [[maybe_unused]].
The statements in operations/copy.cc give -Wunused-value warnings. I
think I meant to use |= rather than !=.
And operations/file_size.cc gets -Wsign-compare warnings.
Backport from mainline
2020-03-05 Jonathan Wakely <jwakely@redhat.com>
* testsuite/27_io/filesystem/operations/all.cc: Mark unused variable.
* testsuite/27_io/filesystem/operations/copy.cc: Fix typo.
* testsuite/experimental/filesystem/operations/copy.cc: Likewise.
* testsuite/27_io/filesystem/operations/file_size.cc: Use correct type
for return value, and in comparison.
* testsuite/experimental/filesystem/operations/file_size.cc: Likewise.
Fix data race when _Safe_iterator_base::_M_detach() runs concurrently with
the _Safe_container_base destructor.
Backport from mainline
2019-09-27 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/91910
* src/c++11/debug.cc (_Safe_iterator_base::_M_detach()): Load pointer
atomically and lock the mutex before accessing the sequence.
(_Safe_local_iterator_base::_M_detach()): Likewise.
(_Safe_iterator_base::_M_reset()): Clear _M_sequence atomically.
The Library Working Group have approved a change to std::for_each_n that
requires it to handle negative N gracefully, which we were not doing for
random access iterators.
Backport from mainline
2019-11-07 Jonathan Wakely <jwakely@redhat.com>
* include/bits/stl_algo.h (for_each_n): Handle negative count.
* testsuite/25_algorithms/for_each/for_each_n_debug.cc: New test.
Looking through the arm backend I noticed that the modes used to pass
comparison types into subtract-with-carry operations were being
incorrectly set. The result is that the compiler is not truly
self-consistent. To clean this up I've introduced a new predicate,
arm_borrow_operation (borrowed from the AArch64 backend) which can
match the comparison type with the required mode and then fixed all
the patterns to use this. The split patterns that were generating
incorrect modes have all obviously been fixed as well.
The basic rule for the use of a borrow is:
- if the condition code was set by a 'subtract-like' operation (subs, cmp),
then use CCmode and LTU.
- if the condition code was by unsigned overflow of addition (adds), then
use CC_Cmode and GEU.
gcc:
PR target/90311
Backport from master
* config/arm/predicates.md (arm_borrow_operation): New predicate.
* config/arm/arm.c (subdi3_compare1): Use CCmode for the split.
(arm_subdi3, subdi_di_zesidi, subdi_di_sesidi): Likewise.
(subdi_zesidi_zesidi): Likewise.
(negdi2_compare, negdi2_insn): Likewise.
(negdi_extensidi): Likewise.
(negdi_zero_extendsidi): Likewise.
(arm_cmpdi_insn): Likewise.
(subsi3_carryin): Use arm_borrow_operation.
(subsi3_carryin_const): Likewise.
(subsi3_carryin_const0): Likewise.
(subsi3_carryin_compare): Likewise.
(subsi3_carryin_compare_const): Likewise.
(subsi3_carryin_compare_const0): Likewise.
(subsi3_carryin_shift): Likewise.
(rsbsi3_carryin_shift): Likewise.
(negsi2_carryin_compare): Likewise.
gcc/testsuite:
2020-03-05 Jakub Jelinek <jakub@redhat.com>
Backport from master
PR target/90311
* gcc.c-torture/execute/pr90311.c: New test.
asan_test.cc tries to allocate 0xf0000000 bytes for 32bit targets in
a disabled DISABLED_DemoOOM test. Since the testcase is compiled with
-Werror, the compilation fails with:
error: argument 1 value '4026531840' exceeds maximum object size 2147483647
Compile with -Wno-alloc-size-larger-than to avoid compilation failure.
* g++.dg/asan/asan_test.C (dg-options): Add
-Wno-alloc-size-larger-than.
gcc/cp/ChangeLog:
Backport from trunk.
2020-02-21 Martin Sebor <msebor@redhat.com>
PR c++/93753
* class.c (check_flexarrays): Tighten up a test for potential members
of anonymous structs or unions.
gcc/testsuite/ChangeLog:
Backport from trunk.
2020-02-21 Martin Sebor <msebor@redhat.com>
PR c++/93753
* g++.dg/ext/flexary36.C: New test.
Just missing the usual SFINAE pattern here. This was fixed for GCC 10 as a
drive-by in r277902.
gcc/cp/ChangeLog
2020-03-05 Jason Merrill <jason@redhat.com>
PR c++/90338
* pt.c (invalid_nontype_parm_type_p): Check complain for non-literal
and mutable errors.
2020-03-05 Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/92976
* match.c (select_type_set_tmp): Variable 'selector' to replace
select_type_stack->selector. If the selector array spec has
explicit bounds, make the temporary's bounds deferred.
2020-03-05 Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/92976
* gfortran.dg/select_type_48.f90 : New test.
PR c++/93299 - ICE in tsubst_copy with parenthesized expression.
* pt.c (tsubst_copy): Handle a REF_PARENTHESIZED_P VIEW_CONVERT_EXPR.
* g++.dg/cpp1y/paren5.C: New test.
PR c++/93676 - value-init crash in template.
* init.c (build_new_1): Don't call build_vec_init in a template.
* g++.dg/cpp0x/nsdmi-template19.C: New test.
2020-03-03 Jason Merrill <jason@redhat.com>
Marek Polacek <polacek@redhat.com>
PR c++/90505 - mismatch in template argument deduction.
* pt.c (tsubst): Don't reduce the template level of template
parameters when tf_partial.
* g++.dg/template/deduce4.C: New test.
* g++.dg/template/deduce5.C: New test.
* g++.dg/template/deduce6.C: New test.
* g++.dg/template/deduce7.C: New test.
output_constructor doesn't like two consecutive entries with fields at the
same position; let's avoid adding the one for the empty field.
gcc/cp/ChangeLog
2020-03-04 Jason Merrill <jason@redhat.com>
PR c++/90432
* init.c (perform_member_init): Don't do aggregate initialization of
empty field.
* constexpr.c (cx_check_missing_mem_inits): Don't enforce
initialization of empty field.
warn_for_memset calls fold_for_warn, which calls fold_non_dependent_expr, so
also calling instantiate_non_dependent_expr here is undesirable.
gcc/cp/ChangeLog
2020-03-04 Jason Merrill <jason@redhat.com>
PR c++/90997
* semantics.c (finish_call_expr): Don't call
instantiate_non_dependent_expr before warn_for_memset.
The XFAILs in this testcase (20050603-3.c) are no longer necessary
since the fix to PR68803 was committed with svn revision r242681.
2020-03-04 Will Schmidt <will_schmidt@vnet.ibm.com>
testsuite
* gcc.target/powerpc/20050603-3.c: Remove XFAILS.
When doing the 8.4-rc1, I've noticed (probably also because of the dying
disk on sourceware) that git clone is extremely slow, and furthermore when
all of us have some local snapshots, it is a waste of resources to download
everything again. Especially for the -f runs when we'll need to wait until
git tag -s asks us for a gpg password interactively.
The following patch adds an option through which one can point the script
at a local gcc .git directory from which it can --dissociate --reference ...
during cloning to speed it up.
2020-02-27 Jakub Jelinek <jakub@redhat.com>
* gcc_release: Add support for -b local-git-repo argument.
The following testcase ICEs in cross to riscv64-linux. The problem is
that we have a DImode integral constant (that doesn't fit into SImode),
which is pushed into a constant pool and later access just the first half of
it using a MEM. When plus_constant is called on such a MEM, if the constant
has mode, we verify the mode, but if it doesn't, we don't and ICE later on
when we think the CONST_INT is a valid SImode constant.
2020-03-03 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/94002
* explow.c (plus_constant): Punt if cst has VOIDmode and
get_pool_mode is different from mode.
* gcc.dg/pr94002.c: New test.
Here, we were going down the wrong path in perform_member_init because of
the incorrect parens around the mem-initializer for the array. And then
cxx_eval_vec_init_1 didn't know what to do with a CONSTRUCTOR as the
initializer. For GCC 9, let's just fix the latter issue.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/86917
* constexpr.c (cxx_eval_vec_init_1): Handle CONSTRUCTOR.
Since copying a class object is defined in terms of the copy constructor,
copying an empty class is OK even if it would otherwise not be usable in a
constant expression. Relatedly, using a parameter as an lvalue is no more
problematic than a local variable, and calling a member function uses the
object as an lvalue.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/91953
* constexpr.c (potential_constant_expression_1) [PARM_DECL]: Allow
empty class type.
[COMPONENT_REF]: A member function reference doesn't use the object
as an rvalue.
The C front-end fixed this issue in r257620 by adding a DECL_EXPR from
grokdeclarator. We don't have an easy way to do that in the C++ front-end,
but it works fine to create and prepend a DECL_EXPR when we are genericizing
the NOP_EXPR for the cast.
The C patch wraps the DECL_EXPR in a BIND_EXPR, but that seems unnecessary
in C++; this is just a hook to run gimplify_type_sizes, we aren't actually
declaring anything that we need to worry about scoping for.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/88256
* cp-gimplify.c (predeclare_vla): New.
(cp_genericize_r) [NOP_EXPR]: Call it.
Here, we end up calling gen_type_die_with_usage for a type that's in the
middle of finish_struct_1, after we set TYPE_NEEDS_CONSTRUCTING on it but
before we copy all the flags to the variants--and, significantly, before we
set its TYPE_SIZE. It seems reasonable to only look at
TYPE_NEEDS_CONSTRUCTING on complete types, since we aren't going to try to
create an object of an incomplete type any other way.
gcc/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/92601
* tree.c (verify_type_variant): Only verify TYPE_NEEDS_CONSTRUCTING
of complete types.
A return statement in a discarded statement is not used for return type
deduction, but we still want to do deduction for a return statement in a
lambda in a discarded statement.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/93442
* parser.c (cp_parser_lambda_expression): Clear in_discarded_stmt.
We were failing to handle VLA capture in tsubst_lambda_expr; initially
building a DECLTYPE_TYPE for the capture and then tsubsting it doesn't give
the special VLA handling. So with this patch we call add_capture again for
VLAs.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/90732 - ICE with VLA capture and generic lambda.
* pt.c (tsubst_lambda_expr): Repeat add_capture for VLAs.
My fix for 60503 fixed handling of C++11 attributes following the
lambda-declarator. My patch for 89640 re-added support for GNU attributes,
but attributes after the trailing return type were parsed as applying to the
return type rather than to the function. This patch adjusts parsing of a
trailing-return-type to ignore GNU attributes at the end of the declaration
so that they will be applied to the declaration as a whole.
I also considered parsing the attributes between the closing paren and the
trailing-return-type, and tried a variety of approaches to implementing
that, but I think it's better to stick with the documented rule that "An
attribute specifier list may appear immediately before the comma, '=' or
semicolon terminating the declaration of an identifier...." Anyone
disagree?
Meanwhile, C++ committee discussion about the lack of any way to apply
attributes to a lambda op() seems to have concluded that they should go
between the introducer and declarator, so I've implemented that as well.
gcc/cp/ChangeLog
2020-03-02 Jason Merrill <jason@redhat.com>
PR c++/90333
PR c++/89640
PR c++/60503
* parser.c (cp_parser_type_specifier_seq): Don't parse attributes in
a trailing return type.
(cp_parser_lambda_declarator_opt): Parse C++11 attributes before
parens.
When generating the separate file with LTO debug sections, we should
also copy .note.gnu.property section.
PR lto/93966
* simple-object.c (handle_lto_debug_sections): Also copy
.note.gnu.property section.
(cherry picked from commit 577350603a)
2020-02-29 John David Anglin <danglin@gcc.gnu.org>
* gcc.dg/pr90756.c: Add -fno-common option on hppa*-*-hpux*.
* gcc.dg/torture/20190327-1.c: Likewise.
* gcc.dg/torture/pr90020.c: Skip on hppa*-*-hpux*.
2020-02-29 John David Anglin <danglin@gcc.gnu.org>
Backport from mainline
2019-09-26 Ian Lance Taylor <iant@golang.org>
PR libbacktrace/91908
* pecoff.c (backtrace_initialize): Explicitly cast unchecked
__sync_bool_compare_and_swap to void.
* xcoff.c (backtrace_initialize): Likewise.
Backport from mainline
2020-02-28 Martin Liska <mliska@suse.cz>
PR other/93965
* configure.ac: Improve detection of ld_date by requiring
either two dashes or none.
* configure: Regenerate.
The following testcase is rejected, while it was accepted in 3.4 and earlier
(before tree-ssa merge).
The problem is that we decide to promote the const variable to TREE_STATIC,
but TREE_STATIC DECL_REGISTER VAR_DECLs may only be the global register vars
and so assemble_variable/make_decl_rtl diagnoses it.
Either we do what the following patch does, where we could consider
register as a hint the user doesn't want such optimization, because if
something is forced static, it is not "register" anymore and register static
is not valid in C either, or we could clear DECL_REGISTER instead, but would
still need to punt at least on DECL_HARD_REGISTER cases.
2020-02-27 Jakub Jelinek <jakub@redhat.com>
PR c/93949
* gimplify.c (gimplify_init_constructor): Don't promote readonly
DECL_REGISTER variables to TREE_STATIC.
* gcc.c-torture/compile/pr93949.c: New test.
And here is the corresponding 9.x change where we the patch just punts if
ref->size is not whole bytes, like we already punt if offseti is not byte
aligned.
2020-02-27 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93945
* tree-ssa-sccvn.c (vn_reference_lookup_3): For memset with non-zero
second operand, require ref->size to be a multiple of BITS_PER_UNIT.
* gcc.c-torture/execute/pr93945.c: New test.
PR target/91276 - Doc typos in __builtin_crypto_vpmsum*
gcc/ChangeLog:
2020-02-26 Carl Love <cel@us.ibm.com>
PR target/91276
* doc/extend.texi (PowerPC AltiVec Built-in Functions available on
ISA 3.0): The builtin-function name __builtin_crypto_vpmsumb is only
for the vector unsigned short arguments. It is also listed as the
name of the built-in for arguments vector unsigned short,
vector unsigned int and vector unsigned long long built-ins. The
name of the builtins for these arguments should be:
__builtin_crypto_vpmsumh, __builtin_crypto_vpmsumw and
__builtin_crypto_vpmsumd respectively.
This reverts commit 65e894738f.
Commit appears to have been made on the wrong branch, and breaks
contrib/gcc_update because it checks in a file gcc/REVISION.
In r268428 I changed reshape_init_r in such a way that when it sees
a nested { } in a CONSTRUCTOR with missing braces, it just returns
the initializer:
+ else if (COMPOUND_LITERAL_P (stripped_init)
...
+ ++d->cur;
+ gcc_assert (!BRACE_ENCLOSED_INITIALIZER_P (stripped_init));
+ return init;
But as this test shows, that's incorrect: if TYPE is an array, we need
to proceed to reshape_init_array_1 which will iterate over the array
initializers:
6006 /* Loop until there are no more initializers. */
6007 for (index = 0;
6008 d->cur != d->end && (!sized_array_p || index <= max_index_cst);
6009 ++index)
6010 {
and update d.cur accordingly. In other words, when reshape_init gets
{{col[0][0], col[1][0], col[2][0], col[3][0]},
{col[0][1], col[1][1], col[2][1], col[3][1]},
{col[0][2], col[1][2], col[2][2], col[3][2]},
{col[0][3], col[1][3], col[2][3], col[3][3]}}
we recurse on the first element:
{col[0][0], col[1][0], col[2][0], col[3][0]}
and we can't just move d.cur to point to
{col[0][1], col[1][1], col[2][1], col[3][1]}
and return; we need to iterate, so that d.cur ends up being properly
updated, and after all initializers have been seen, points to d.end.
Currently we skip the loop, wherefore we hit this:
6502 /* Make sure all the element of the constructor were used. Otherwise,
6503 issue an error about exceeding initializers. */
6504 if (d.cur != d.end)
6505 {
6506 if (complain & tf_error)
6507 error ("too many initializers for %qT", type);
6508 return error_mark_node;
6509 }
gcc/cp/ChangeLog
2019-12-19 Marek Polacek <polacek@redhat.com>
PR c++/92745 - bogus error when initializing array of vectors.
* decl.c (reshape_init_r): For a nested compound literal, do
call reshape_init_{class,array,vector}.
gcc/testsuite/ChangeLog
2019-12-19 Marek Polacek <polacek@redhat.com>
Jakub Jelinek <jakub@redhat.com>
PR c++/92745 - bogus error when initializing array of vectors.
* g++.dg/cpp0x/initlist118.C: New test.
* g++.dg/cpp0x/initlist118.C: Add -Wno-psabi -w to dg-options.
We should be able to assume that a template instantiation or other COMDAT
has non-zero address even if MAKE_DECL_ONE_ONLY for the target sets
DECL_WEAK and we haven't yet decided to emit a definition in this
translation unit.
gcc/ChangeLog
2020-02-26 Jason Merrill <jason@redhat.com>
PR c++/92003
* symtab.c (symtab_node::nonzero_address): A DECL_COMDAT decl has
non-zero address even if weak and not yet defined.
Value-initialization is importantly different from {}-initialization for
this testcase, where the former calls the deleted S constructor and the
latter initializes S happily.
gcc/cp/ChangeLog
2020-02-26 Jason Merrill <jason@redhat.com>
PR c++/90951
* constexpr.c (cxx_eval_array_reference): {}-initialize missing
elements instead of value-initializing them.
In unevaluated context, we only substitute a single PARM_DECL, not the
entire chain, but the handling of an empty pack expansion was missing that
check.
gcc/cp/ChangeLog
2020-02-26 Jason Merrill <jason@redhat.com>
PR c++/93140
* pt.c (tsubst_decl) [PARM_DECL]: Check cp_unevaluated_operand in
handling of TREE_CHAIN for empty pack.
If cxx_eval_outermost_constant_expr doesn't change the argument, we really
shouldn't unshare it when we try to fold it again.
gcc/cp/ChangeLog
2020-02-26 Jason Merrill <jason@redhat.com>
PR c++/92852
* constexpr.c (maybe_constant_value): Don't unshare if the cached
value is the same as the argument.
The deserialization functions for random number distributions fail to
check the stream state before using the extracted values. In some cases
this leads to using indeterminate values to resize a vector, and then
filling that vector with indeterminate values.
No values that affect control flow should be used without checking that a
good value was read from the stream.
Additionally, where reasonable to do so, defer modifying any state in
the distribution until all values have been successfully read, to avoid
modifying some of the distribution's parameters and leaving others
unchanged.
Backport from mainline
2020-01-09 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/93205
* include/bits/random.h (operator>>): Check stream operation succeeds.
* include/bits/random.tcc: (operator>>): Likewise.
(__extract_params): New function to fill a vector from a stream.
* testsuite/26_numerics/random/pr60037-neg.cc: Adjust dg-error line.
Some system headers can be broken by the machine_name fix performed
by GCC during the fixincludes step. According to the comment in
fixincludes/fixinc.h:130 :
On some platforms, machine_name doesn't work properly and
breaks some of the header files. Since everything works
properly without it, just wipe the macro list to
disable the fix.
So we can just skip it to avoid trouble.
Backport from trunk
2020-02-13 Matheus Castanho <msc@linux.ibm.com>
fixincludes/
* fixinc.in: Skip machine_name fix on powerpc*-*-linux*.
It's wrong to assume that clock_gettime is unavailable on any *-*-linux*
target that doesn't have glibc 2.17 or later. Use a generic test instead
of using __GLIBC_PREREQ. Only do that test when is_hosted=yes so that we
don't get an error for cross targets without a working linker.
This ensures that C library's clock_gettime will be used on non-glibc
targets, instead of an incorrect syscall to SYS_clock_gettime.
Backport from mainline
2020-01-28 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/93325
* acinclude.m4 (GLIBCXX_ENABLE_LIBSTDCXX_TIME): Use AC_SEARCH_LIBS for
clock_gettime instead of explicit glibc version check.
* configure: Regenerate.
The requirements for this function are only that the deleter is
swappable, but we incorrectly require that the element type is complete
and that the deleter can be swapped using std::swap (which requires it
to be move cosntructible and move assignable).
The fix is to add __uniq_ptr_impl::swap which swaps the pointer and
deleter individually, instead of using the generic std::swap on the
tuple containing them.
PR libstdc++/93562
* include/bits/unique_ptr.h (__uniq_ptr_impl::swap): Define.
(unique_ptr::swap, unique_ptr<T[], D>::swap): Call it.
* testsuite/20_util/unique_ptr/modifiers/93562.cc: New test.
In a freestanding library we don't install the <pstl/pstl_config.h>
header, so don't try to include it unless it exists.
Explicitly declare aligned alloc functions for freestanding, because
<cstdlib> doesn't declare them.
Backport from mainline
2020-01-17 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/92376
* include/bits/c++config: Only do PSTL config when the header is
present, to fix freestanding.
* libsupc++/new_opa.cc [!_GLIBCXX_HOSTED]: Declare allocation
functions if they were detected by configure.
Backport from mainline
2019-10-09 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/78552
* src/c++98/locale_init.cc (locale::classic()): Do not construct a new
locale object for every call.
(locale::_S_initialize_once()): Construct C locale here.
As PR93047 said, __builtin_apply/__builtin_return does not work well with
-frename-registers. This is caused by return register(e.g. r3) is used to
rename another register, before return register is stored to stack.
This patch fix this issue by emitting clobber for those egisters which
maybe changed by untyped call.
gcc/
2020-02-26 Jiufu Guo <guojiufu@linux.ibm.com>
PR target/93047
* config/rs6000/rs6000.md (untyped_call): Add emit_clobber.
gcc/testsuite
2020-02-26 Jiufu Guo <guojiufu@linux.ibm.com>
PR target/93047
* gcc.dg/torture/stackalign/builtin-return-2.c: New test case.
The following testcase is miscompiled in 8+.
The problem is that check_no_overlap has a special case for INTEGER_CST
marked stores (i.e. stores of constants), if both all currenly merged stores
and the one under consideration for merging with them are marked that way,
it anticipates that other INTEGER_CST marked stores that overlap with those
and precede those (have smaller info->order) could be merged with those and
doesn't punt for them.
In PR86844 and PR87859 fixes I've then added quite large code that is
performed after check_no_overlap and tries to find out if we need and can
merge further INTEGER_CST marked stores, or need to punt.
Unfortunately, that code is there only in the overlapping case code and
the testcase below shows that we really need it even in the adjacent store
case. After sort_by_bitpos we have:
bitpos width order rhs_code
96 32 3 INTEGER_CST
128 32 1 INTEGER_CST
128 128 2 INTEGER_CST
192 32 0 MEM_REF
Because of the missing PR86844/PR87859-ish code in the adjacent store
case, we merge the adjacent (memory wise) stores 96/32/3 and 128/32/1,
and then we consider the 128-bit store which is in program-order in between
them, but in this case we punt, because the merging would extend the
merged store region from bitpos 96 and 64-bits to bitpos 96 and 160-bits
and that has an overlap with an incompatible store (the MEM_REF one).
The problem is that we can't really punt this way, because the 128-bit
store is in between those two we've merged already, so either we manage
to merge even that one together with the others, or would need to avoid
already merging the 96/32/3 and 128/32/1 stores together.
Now, rather than copying around the PR86844/PR87859 code to the other spot,
we can actually just use the overlapping code, merge_overlapping is really
a superset of merge_into, so that is what the patch does. If doing
adjacent store merge for rhs_code other than INTEGER_CST, I believe the
current code is already fine, check_no_overlap in that case doesn't make
the exception and will punt if there is some earlier (smaller order)
non-mergeable overlapping store. There is just one case that could be
problematic, if the merged_store has BIT_INSERT_EXPRs in them and the
new store is a constant store (INTEGER_CST rhs_code), then check_no_overlap
would do the exception and still would allow the special case. But we
really shouldn't have the special case in that case, so this patch also
changes check_no_overlap to just have a bool whether we should have the
special case or not.
Note, as I said in the PR, for GCC11 we could consider performing some kind
of cheap DSE during the store merging (perhaps guarded with flag_tree_dse).
And another thing to consider is only consider as problematic non-mergeable
stores that not only have order smaller than last_order as currently, but
also have order larger than first_order, as in this testcase if we actually
ignored (not merged with anything at all) the 192/32/0 store, because it is
not in between the other stores we'd merge, it would be fine to merge the
other 3 stores, though of course the testcase can be easily adjusted by
putting the 192/32 store after the 128/32 store and then this patch would be
still needed. Though, I think I'd need more time thinking this over.
2020-02-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93820
* gimple-ssa-store-merging.c (check_no_overlap): Change RHS_CODE
argument to ALL_INTEGER_CST_P boolean.
(imm_store_chain_info::try_coalesce_bswap): Adjust caller.
(imm_store_chain_info::coalesce_immediate_stores): Likewise. Handle
adjacent INTEGER_CST store into merged_store->only_constants like
overlapping one.
* gcc.dg/pr93820.c: New test.
Add testcase for a bug that has been just on the 8 branch.
2020-02-26 Jakub Jelinek <jakub@redhat.com>
PR c++/93905
* g++.dg/cpp0x/pr93905.C: New test.
When running the testsuite with -fdisable-rtl-fwprop2 and -mpure-code
for cortex-m0, I noticed that some testcases were failing because we
still generate "ldr rX, .LCY", which is what we want to avoid with
-mpure-code. This is latent since a recent improvement in fwprop
(PR88833).
In this patch I change the thumb1_movsi_insn pattern so that it emits
the desired instruction sequence when arm_disable_literal_pool is set.
To achieve that, I introduce a new required_for_purecode attribute to
enable the corresponding alternative in thumb1_movsi_insn and take the
actual instruction sequence length into account.
gcc/ChangeLog:
2020-02-25 Christophe Lyon <christophe.lyon@linaro.org>
Backport from mainline
2020-02-25 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/arm.md (required_for_purecode): New attribute.
(enabled): Handle required_for_purecode.
* config/arm/thumb1.md (thumb1_movsi_insn): Add alternative to
work with -mpure-code.
This patch extends support for -mpure-code to all thumb-1 processors,
by removing the need for MOVT.
Symbol addresses are built using upper8_15, upper0_7, lower8_15 and
lower0_7 relocations, and constants are built using sequences of
movs/adds and lsls instructions.
The extension of the *thumb1_movhf pattern uses always the same size
(6) although it can emit a shorter sequence when possible. This is
similar to what *arm32_movhf already does.
CASE_VECTOR_PC_RELATIVE is now false with -mpure-code, to avoid
generating invalid assembly code with differences from symbols from
two different sections (the difference cannot be computed by the
assembler).
Tests pr45701-[12].c needed a small adjustment to avoid matching
upper8_15 when looking for the r8 register.
Test no-literal-pool.c is augmented with __fp16, so it now uses
-mfp16-format=ieee.
Test thumb1-Os-mult.c generates an inline code sequence with
-mpure-code and computes the multiplication by using a sequence of
add/shift rather than using the multiply instruction, so we skip it in
presence of -mpure-code.
With -mcpu=cortex-m0, the pure-code/no-literal-pool.c fails because
code like:
static char *p = "Hello World";
char *
testchar ()
{
return p + 4;
}
generates 2 indirections (I removed non-essential directives/code)
.section .rodata
.LC0:
.ascii "Hello World\000"
.data
p:
.word .LC0
.section .rodata
.LC2:
.word p
.section .text,"0x20000006",%progbits
testchar:
push {r7, lr}
add r7, sp, #0
movs r3, #:upper8_15:#.LC2
lsls r3, #8
adds r3, #:upper0_7:#.LC2
lsls r3, #8
adds r3, #:lower8_15:#.LC2
lsls r3, #8
adds r3, #:lower0_7:#.LC2
ldr r3, [r3]
ldr r3, [r3]
adds r3, r3, #4
movs r0, r3
mov sp, r7
@ sp needed
pop {r7, pc}
By contrast, when using -mcpu=cortex-m4, the code looks like:
.section .rodata
.LC0:
.ascii "Hello World\000"
.data
p:
.word .LC0
testchar:
push {r7}
add r7, sp, #0
movw r3, #:lower16:p
movt r3, #:upper16:p
ldr r3, [r3]
adds r3, r3, #4
mov r0, r3
mov sp, r7
pop {r7}
bx lr
I haven't found yet how to make code for cortex-m0 apply upper/lower
relocations to "p" instead of .LC2. The current code looks functional,
but could be improved.
2020-02-25 Christophe Lyon <christophe.lyon@linaro.org>
Backport from mainline
2019-10-18 Christophe Lyon <christophe.lyon@linaro.org>
gcc/
* config/arm/arm-protos.h (thumb1_gen_const_int): Add new prototype.
* config/arm/arm.c (arm_option_check_internal): Remove restriction
on MOVT for -mpure-code.
(thumb1_gen_const_int): New function.
(thumb1_legitimate_address_p): Support -mpure-code.
(thumb1_rtx_costs): Likewise.
(thumb1_size_rtx_costs): Likewise.
(arm_thumb1_mi_thunk): Likewise.
* config/arm/arm.h (CASE_VECTOR_PC_RELATIVE): Likewise.
* config/arm/thumb1.md (thumb1_movsi_symbol_ref): New.
(*thumb1_movhf): Support -mpure-code.
gcc/testsuite/
* gcc.target/arm/pr45701-1.c: Adjust for -mpure-code.
* gcc.target/arm/pr45701-2.c: Likewise.
* gcc.target/arm/pure-code/no-literal-pool.c: Add tests for
__fp16.
* gcc.target/arm/pure-code/pure-code.exp: Remove thumb2 and movt
conditions.
* gcc.target/arm/thumb1-Os-mult.c: Skip if -mpure-code is used.
git is miscompiled on s390x-linux with -O2 -march=zEC12 -mtune=z13.
I've managed to reduce it into the following testcase. The problem is that
during combine we see the s->k = -1; bitfield store and change the SET_SRC
from a pseudo into a constant:
(set (zero_extract:DI (mem/j:HI (plus:DI (reg/v/f:DI 60 [ s ])
(const_int 10 [0xa])) [0 +0 S2 A16])
(const_int 2 [0x2])
(const_int 7 [0x7]))
(const_int -1 [0xffffffffffffffff]))
This on s390x with the above option isn't recognized as valid instruction,
so find_split_point decides to handle it as IOR or IOR/AND.
src is -1, mask is 3 and pos is 7.
src != mask (this is also incorrect, we want to set all (both) bits in the
bitfield), so we go for IOR/AND, but instead of trying
mem = (mem & ~0x180) | ((-1 << 7) & 0x180)
we actually try
mem = (mem & ~0x180) | (-1 << 7)
and that is further simplified into:
mem = mem | (-1 << 7)
aka
mem = mem | 0xff80
which doesn't set just the 2-bit bitfield, but also many other bitfields
that shouldn't be touched.
We really should do:
mem = mem | 0x180
instead.
The problem is that we assume that no bits but those low len (2 here) will
be set in the SET_SRC, but there is nothing that can prevent that, we just
should ignore the other bits.
The following patch fixes it by masking src with mask, this way already
the src == mask test will DTRT, and as the code for or_mask uses
gen_int_mode, if the most significant bit is set after shifting it left by
pos, it will be properly sign-extended.
2020-02-25 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/93908
* combine.c (find_split_point): For store into ZERO_EXTRACT, and src
with mask.
* gcc.c-torture/execute/pr93908.c: New test.
This fixes a regression whereby the program fails to link with debug
info in LTO mode because of an undefined reference to a symbol coming
from the object files containing the early debug info.
* dwarf2out.c (dwarf2out_size_function): Run in early-DWARF mode.
This patch rewords the whole description to fix minor issues:
- documents 'gimple' and 'types' checks,
- clarifies what happens when option is used without '=list',
- fixes inaccurate wrong wording about release snapshots,
- describes that release checks can only be disabled explicitly.
Backport from master
2020-02-24 Roman Zhuykov <zhroma@ispras.ru>
* doc/install.texi (--enable-checking): Properly document current
behavior.
(--enable-stage1-checking): Minor clarification about bootstrap.
This PR is a regression caused by r256644, which added support for alias
checks involving variable strides. One of the changes in that commit
was to split the access size out of the segment length. The PR shows
that I hadn't done that correctly for the handling of negative strides
in vect_compile_time_alias. The old code was:
const_length_a = (-wi::to_poly_wide (segment_length_a)).force_uhwi ();
offset_a = (offset_a + vect_get_scalar_dr_size (a)) - const_length_a;
where vect_get_scalar_dr_size (a) was cancelling out the subtraction
of the access size inherent in "- const_length_a". Taking the access
size out of the segment length meant that the addition was no longer
needed/correct.
2020-02-24 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2020-02-19 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/93767
* tree-vect-data-refs.c (vect_compile_time_alias): Remove the
access-size bias from the offset calculations for negative strides.
gcc/testsuite/
Backport from mainline
2020-02-19 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/93767
* gcc.dg/vect/pr93767.c: New test.
Backported from mainline
2020-02-24 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93835
* simplify.c (simplify_findloc_nodim) : Fix whitespace issues.
(gfc_simplify_shape) : Create and initialise one shape value
for the result expression. Set shape value with the rank of
the source array.
PR fortran/93835
* gfortran.dg/pr77351.f90 : Check for one error instead of two.
* gfortran.dg/pr93835.f08 : New test.
Fix rs6000_legitimate_address_p(), which erroneously marks a valid Altivec
address as being invalid, which causes LRA's process_address() to go into
an infinite loop spilling the same address over and over again.
Include Mike's earlier commits that fix bugs this patch exposes.
Backport from master
2020-02-20 Peter Bergner <bergner@linux.ibm.com>
PR target/93658
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Handle VSX
vector modes.
* gcc.target/powerpc/pr93658.c: New test.
Backport from master
2020-02-03 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.c (get_vector_offset): New helper function
to calculate the offset in memory from the start of a vector of a
particular element. Add code to keep the element number in
bounds if the element number is variable.
(rs6000_adjust_vec_address): Move calculation of offset of the
vector element to get_vector_offset.
(rs6000_split_vec_extract_var): Do not do the initial AND of
element here, move the code to get_vector_offset.
Fix PR 93568 (thinko)
Backport from master
2020-02-05 Michael Meissner <meissner@linux.ibm.com>
PR target/93568
* config/rs6000/rs6000.c (get_vector_offset): Fix Q constraint assert
to use MEM.
Backport from master
2020-01-06 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/vsx.md (vsx_extract_<mode>_var, VSX_D iterator):
Use 'Q' for doing vector extract from memory.
(vsx_extract_v4sf_var): Use 'Q' for doing vector extract from
memory.
(vsx_extract_<mode>_var, VSX_EXTRACT_I iterator): Use 'Q' for
doing vector extract from memory.
(vsx_extract_<mode>_<VS_scalar>mode_var): Use 'Q' for doing vector
extract from memory.
2020-02-18 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/93599
* io/async.c (destroy_adv_cond): Do not destroy lock.
(async_io): Make sure au->lock is locked for finishing of thread.
Do not lock/unlock around signalling emptysignal. Unlock au->lock
before return.
(init_adv_cond): Do not initialize lock.
(enqueue_transfer): Unlock after signal.
(enqueue_done_id): Likewise.
(enqueue_done): Likewise.
(enqueue_close): Likewise.
(enqueue_data_transfer): Likewise.
(async_wait_id): Do not lock/unlock around signalling au->work.
(async_wait): Unlock after signal.
* io/async.h (SIGNAL): Add comment about needed au->lock.
Remove locking/unlocking of advcond->lock.
(WAIT_SIGNAL_MUTEX): Add comment. Remove locking/unlocking of
advcond->lock. Unlock mutex only at the end. Loop on
__ghread_cond_wait returning zero.
(REVOKE_SIGNAL): Add comment. Remove locking/unlocking of
advcond->lock.
(struct adv_cond): Remove mutex from struct.
2020-02-21 John David Anglin <danglin@gcc.gnu.org>
* gcc/config/pa/pa.c (pa_function_value): Fix check for word and
double-word size when handling aggregate return values.
* gcc/config/pa/som.h (ASM_DECLARE_FUNCTION_NAME): Fix to indicate
that homogeneous SFmode and DFmode aggregates are passed and returned
in general registers.
shufps moves two of the four packed single-precision floating-point values
from *destination* operand (first operand) into the low quadword of the
destination operand. Match source operand to the destination.
PR target/93828
* config/i386/mmx.md (*vec_extractv2sf_1): Match source operand
to destination operand for shufps alternative.
(*vec_extractv2si_1): Ditto.
Skip ENDBR32 at the target function entry when initializing trampoline.
Tested on Linux/x86-64 CET machine with and without -m32.
gcc/
Backport from master
PR target/93656
* config/i386/i386.c (ix86_trampoline_init): Skip ENDBR32 at
the target function entry.
gcc/testsuite/
Backport from master
PR target/93656
* gcc.target/i386/pr93656.c: New test.
(cherry picked from commit 1d69147af2)
PR91984 changes resulted in an expected failure. Backport of PR92113
negated the need for the xfail.
gcc/testsuite/ChangeLog
* typebound_call_22.d03 : Remove xfail clause.
An ICE occurred if an attempt was made to assign a pointer to a
character variable that has an length incorrectly specified using
a real constant and does not have the target attribute.
Backported from mainline
2020-02-18 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93714
* expr.c (gfc_check_pointer_assign): Move check for
matching character length to after checking the lvalue
attributes for target or pointer.
PR fortran/93714
* gfortran.dg/char_pointer_assign_6.f90: Look for no target
message instead of length mismatch.
* gfortran.dg/pr93714_1.f90
* gfortran.dg/pr93714_2.f90
This PR shows that we weren't checking for bitwise-identical values
when trying to encode a VECTOR_CST, so -0.0 was treated the same as
0.0 for -fno-signed-zeros. The patch adds a new OEP flag to select
that behaviour.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-12-05 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/92768
* tree-core.h (OEP_BITWISE): New flag.
* fold-const.c (operand_compare::operand_equal_p): Handle it.
* tree-vector-builder.h (tree_vector_builder::equal_p): Pass it.
gcc/testsuite/
PR middle-end/92768
* gcc.dg/pr92768.c: New test.
In this PR we have two return paths from a function "map". The common
code sets <result> to the value returned by one path, while the other
path does:
<retval> = map (&<retval>, ...);
We treated this call as tail recursion, losing the copy semantics
on the value returned by the recursive call.
We'd correctly reject the same thing for variables:
local = map (&local, ...);
The problem is that RESULT_DECLs didn't get the same treatment.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-08-09 Richard Sandiford <richard.sandiford@arm.com>
PR middle-end/90313
* tree-tailcall.c (find_tail_calls): Reject calls that might
read from an escaped RESULT_DECL.
gcc/testsuite/
PR middle-end/90313
* g++.dg/torture/pr90313.cc: New test.
Caused by using invalid part_refs in kind specifications,
e.g. %re or %im on non-complex expressions and %len on
non character expressions.
Check whether %re, %im and %len are valid when checking
kind specification.
The original patch from Steven G. Kargl <kargl@gcc.gnu.org> only
checked for %re and %im.
Backported from mainline
2020-02-18 Mark Eggleston <markeggleston@gcc.gnu.org>
PR fortran/93580
* primary.c (gfc_match_varspec): If the symbol following %
is re or im and the primary expression type is not BT_COMPLEX
issue an error. If the symbol is len and the primary
expression type is not BT_CHARACTER is an error.
PR fortran/93580
* gfortran.dg/dg/pr93580.f90: New test.
predcom has the following code to stop one rogue load from
interfering with other store-load opportunities:
/* If A is read and B write or vice versa and there is unsuitable
dependence, instead of merging both components into a component
that will certainly not pass suitable_component_p, just put the
read into bad component, perhaps at least the write together with
all the other data refs in it's component will be optimizable. */
But when store-store commoning was added later, this had the effect
of ignoring loads that occur between two candidate stores.
There is code further up to handle loads and stores with unknown
dependences:
/* Don't do store elimination if there is any unknown dependence for
any store data reference. */
if ((DR_IS_WRITE (dra) || DR_IS_WRITE (drb))
&& (DDR_ARE_DEPENDENT (ddr) == chrec_dont_know
|| DDR_NUM_DIST_VECTS (ddr) == 0))
eliminate_store_p = false;
But the store-load code above skips loads for *known* dependences
if (a) the load has already been marked "bad" or (b) the data-ref
machinery knows the dependence distance, but determine_offsets
can't handle the combination.
(a) happens to be the problem in the testcase, but a different
sequence could have given (b) instead. We have writes to individual
fields of a structure and reads from the whole structure. Since
determine_offsets requires the types to be the same, it returns false
for each such read/write combination.
This patch records which components have had loads removed and
prevents store-store commoning for them. It's a bit too pessimistic,
since there shouldn't be a problem if a "bad" load dominates all stores
in a component. But (a) we can't AFAIK use pcom_stmt_dominates_stmt_p
here and (b) the handling for that case would probably need to be
removed again if we handled more exotic cases in future.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2020-01-28 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/93434
* tree-predcom.c (split_data_refs_to_components): Record which
components have had aliasing loads removed. Prevent store-store
commoning for all such components.
gcc/testsuite/
PR tree-optimization/93434
* gcc.c-torture/execute/pr93434.c: New test.
In this PR we assigned a vector mask type to the result of a comparison
and then tried to pass that mask type to a simd clone, which expected
a normal (non-mask) type instead.
This patch simply punts on call arguments that have a mask type.
A better fix would be to pattern-match the comparison to a COND_EXPR,
like we would if the comparison was stored to memory, but doing that
isn't gcc 9 or 10 material.
Note that this doesn't affect x86_64-linux-gnu because the ABI promotes
bool arguments to ints.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-11-29 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/92710
* tree-vect-stmts.c (vectorizable_simd_clone_call): Reject
vector mask arguments.
gcc/testsuite/
PR tree-optimization/92710
* gcc.dg/vect/pr92710.c: New test.
This PR was caused by the SLP handling in get_group_load_store_type
returning VMAT_CONTIGUOUS rather than VMAT_CONTIGUOUS_REVERSE for
downward groups.
A more elaborate fix would be to try to combine the reverse permutation
into SLP_TREE_LOAD_PERMUTATION for loads, but that's really a follow-on
optimisation and not backport material. It might also not necessarily
be a win, if the target supports (say) reversing and odd/even swaps
as independent permutes but doesn't recognise the combined form.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-11-11 Richard Sandiford <richard.sandiford@arm.com>
PR tree-optimization/92420
* tree-vect-stmts.c (get_negative_load_store_type): Move further
up file.
(get_group_load_store_type): Use it for reversed SLP accesses.
gcc/testsuite/
PR tree-optimization/92420
* gcc.dg/vect/pr92420.c: New test.
2020-02-18 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-08-21 Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>
PR target/90724
* config/aarch64/aarch64.c (aarch64_gen_compare_reg_maybe_ze): Force y
in reg if it fails aarch64_plus_operand predicate.
PR target/93743
* config/i386/i386.md (atan2xf3): Swap operands 1 and 2.
(atan2<mode>3): Update operand order in the call to gen_atan2xf3.
testsuite/ChangeLog:
PR target/93743
* gcc.target/i386/pr93743.c : New test.
As the following testcases show (the first one reported, last two
found by code inspection), we need to disallow side-effects
in simplifications that turn some unconditional expression into conditional
one. From my little understanding of genmatch.c, it is able to
automatically disallow side effects if the same operand is used multiple
times in the match pattern, maybe if it is used multiple times in the
replacement pattern, and if it is used in conditional contexts in the match
pattern, could it be taught to handle this case too? If yes, perhaps
just the first hunk could be usable for 8/9 backports (+ the testcases).
2020-02-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93744
* match.pd (((m1 >/</>=/<= m2) * d -> (m1 >/</>=/<= m2) ? d : 0,
A - ((A - B) & -(C cmp D)) -> (C cmp D) ? B : A,
A + ((B - A) & -(C cmp D)) -> (C cmp D) ? B : A): For GENERIC, make
sure @2 in the first and @1 in the other patterns has no side-effects.
* gcc.c-torture/execute/pr93744-1.c: New test.
* gcc.c-torture/execute/pr93744-2.c: New test.
* gcc.c-torture/execute/pr93744-3.c: New test.
This is an old thinko pertaining to the interaction between TLS
sequences and delay slot filling: the compiler knows that it cannot
put instructions with TLS relocations into delay slots with the
original Sun TLS model, but it tests TARGET_SUN_TLS in this context,
which depends only on the assembler. So if the compiler is configured
with the GNU assembler and the Solaris linker, then TARGET_GNU_TLS is
set instead and the limitation is not enforced.
PR target/93704
* config/sparc/sparc.c (eligible_for_call_delay): Test HAVE_GNU_LD
in conjunction with TARGET_GNU_TLS in early return.
When backporting the PR61414 fix to 8.4, I've noticed that the caching
of prec is actually broken, as it would fail to actually store the computed
precision into the hash_map's value and so next time we'd think the enum needs
0 bits.
2020-02-14 Jakub Jelinek <jakub@redhat.com>
PR c++/61414
* class.c (enum_min_precision): Change prec type from int to int &.
* g++.dg/cpp0x/enum39.C: New test.
This adds guards to genmatch generated code before accessing call
expression or stmt arguments that might be out of bounds when
the user provided bogus prototypes for what we consider builtins.
2020-02-05 Richard Biener <rguenther@suse.de>
PR middle-end/90648
* genmatch.c (dt_node::gen_kids_1): Emit number of argument
checks before matching calls.
* gcc.dg/pr90648.c: New testcase.
We were incorrectly assuming a merge operation is conservative enough
for not explicitely handled operations but we also need to consider
offsetting within fields when field-sensitive analysis applies.
2020-01-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/93381
* tree-ssa-structalias.c (find_func_aliases): Assume offsetting
throughout, handle all conversions the same.
* gcc.dg/torture/pr93381.c: New testcase.
Autopar was doing clique bookkeeping too early when creating destination
functions but then later introducing new cliques via versioning loops.
The following moves the bookkeeping to the actual outlining process.
2020-02-14 Richard Biener <rguenther@suse.de>
Backport from mainline
2020-01-28 Richard Biener <rguenther@suse.de>
PR tree-optimization/93439
* tree-parloops.c (create_loop_fn): Move clique bookkeeping...
* tree-cfg.c (move_sese_region_to_fn): ... here.
(verify_types_in_gimple_reference): Verify used cliques are
tracked.
* gfortran.dg/graphite/pr93439.f90: New testcase.
2020-02-14 Richard Biener <rguenther@suse.de>
Backport from mainline
2020-01-09 Richard Biener <rguenther@suse.de>
PR middle-end/93054
* gimplify.c (gimplify_expr): Deal with NOP definitions.
* gcc.dg/pr93054.c: New testcase.
We were pruning type-local subroutine DIEs if their context is unused
despite us later needing those DIEs as abstract origins for inlines.
The patch makes code already present for -fvar-tracking-assignments
unconditional.
2020-02-14 Richard Biener <rguenther@suse.de>
Backport from mainline
2020-01-20 Richard Biener <rguenther@suse.de>
PR debug/92763
* dwarf2out.c (prune_unused_types): Unconditionally mark
called function DIEs.
* g++.dg/debug/pr92763.C: New testcase.
2020-02-14 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-11-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/92704
* tree-if-conv.c (combine_blocks): Deal with virtual PHIs
in loops performing only loads.
* gcc.dg/torture/pr92704.c: New testcase.
2020-02-14 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-11-27 Richard Biener <rguenther@suse.de>
PR middle-end/92674
* tree-inline.c (expand_call_inline): Delay purging EH/abnormal
edges and instead record blocks in bitmap.
(gimple_expand_calls_inline): Adjust.
(fold_marked_statements): Delay EH cleanup until all folding is
done.
(optimize_inline_calls): Do EH/abnormal cleanup for calls after
inlining finished.
The following testcase ICEs, because the PR84305 changes try to evaluate
the size earlier. If size has side-effects, that is desirable, and the
side-effects will actually be wrapped in a SAVE_EXPR. The problem on this
testcase is that there are no side-effects, and c_fully_fold doesn't fold
those COMPOUND_EXPRs to constant, and while before gimplification we unshare
trees found in the expressions, the unsharing doesn't involve TYPE_SIZE etc.
of used types. Gimplification is destructive though, so when we gimplify
the two nested COMPOUND_EXPRs and then try to gimplify it the second time
for the TYPE_SIZEs, we ICE.
Now, we could use unshare_expr in what we push to *expr, SAVE_EXPRs and
their operands in there aren't unshared, but I really don't see a point of
evaluating expressions that don't have side-effects before, so instead
this just pushes there expressions that do have side-effects.
2020-02-13 Jakub Jelinek <jakub@redhat.com>
PR c/93576
* c-decl.c (grokdeclarator): If this_size_varies, only push size into
*expr if it has side effects.
* gcc.dg/pr93576.c: New test.
As mentioned in the PR and as
https://software.intel.com/sites/landingpage/IntrinsicsGuide/#text=_mask_popcnt_epi
also documents, _mm*_popcnt_epi* intrinsics are consistent with all other
unary AVX512* intrinsics regarding arguments, i.e. the
_mm*_whatever has just single argument (called a in the docs, and __A in the
GCC headers),
_mm*_mask_whatever has 3 arguments (called src, k, a in the docs and
_W, __U, __A in GCC headers) and
_mm*_maskz_whatever 2 arguments (called k, a in the docs and __U, __A in GCC
headers). Unfortunately, whomever implemented the _mm*_popcnt_epi*
intrinsics got it wrong for the _mm*_mask_popcnt_epi* ones, calling the
args __A, __U, __B and not passing them in the canonical order to the
builtins, making it API incompatible with ICC as well as clang (tested on
godbolts clang 7/8/9/trunk and ICC 19.0.{0,1}, older clang/ICC don't
understand those, so it isn't that it used to be broken even in other
compilers and got changed afterwards).
2020-02-13 Jakub Jelinek <jakub@redhat.com>
PR target/93696
* config/i386/avx512bitalgintrin.h (_mm512_mask_popcnt_epi8,
_mm512_mask_popcnt_epi16, _mm256_mask_popcnt_epi8,
_mm256_mask_popcnt_epi16, _mm_mask_popcnt_epi8,
_mm_mask_popcnt_epi16): Rename __B argument to __A and __A to __W,
pass __A to the builtin followed by __W instead of __A followed by
__B.
* config/i386/avx512vpopcntdqintrin.h (_mm512_mask_popcnt_epi32,
_mm512_mask_popcnt_epi64): Likewise.
* config/i386/avx512vpopcntdqvlintrin.h (_mm_mask_popcnt_epi32,
_mm256_mask_popcnt_epi32, _mm_mask_popcnt_epi64,
_mm256_mask_popcnt_epi64): Likewise.
* gcc.target/i386/pr93696-1.c: New test.
* gcc.target/i386/pr93696-2.c: New test.
* gcc.target/i386/avx512bitalg-vpopcntw-1.c (TEST): Fix argument order
of _mm*_mask_popcnt_*.
* gcc.target/i386/avx512vpopcntdq-vpopcntq-1.c (TEST): Likewise.
* gcc.target/i386/avx512vpopcntdq-vpopcntd-1.c (TEST): Likewise.
* gcc.target/i386/avx512bitalg-vpopcntb-1.c (TEST): Likewise.
* gcc.target/i386/avx512bitalg-vpopcntb.c (foo): Likewise.
* gcc.target/i386/avx512bitalg-vpopcntbvl.c (foo): Likewise.
* gcc.target/i386/avx512vpopcntdq-vpopcntd.c (foo): Likewise.
* gcc.target/i386/avx512bitalg-vpopcntwvl.c (foo): Likewise.
* gcc.target/i386/avx512bitalg-vpopcntw.c (foo): Likewise.
* gcc.target/i386/avx512vpopcntdq-vpopcntq.c (foo): Likewise.
As mentioned in the PR, the intrinsics allow counts from 0 to 255, but
we actually reject values from 128 to 255. That is because QImode
CONST_INTs can be only -128 to 127. Fixed by using const_0_to_255_operand
and dropping the modes for the operands with those predicates
(the IL actually contains the CONST_INT which has VOIDmode).
2020-02-13 Jakub Jelinek <jakub@redhat.com>
PR target/93673
* config/i386/sse.md (k<code><mode>): Drop mode from last operand and
use const_0_to_255_operand predicate instead of immediate_operand.
(avx512dq_fpclass<mode><mask_scalar_merge_name>,
avx512dq_vmfpclass<mode><mask_scalar_merge_name>,
vgf2p8affineinvqb_<mode><mask_name>,
vgf2p8affineqb_<mode><mask_name>): Drop mode from
const_0_to_255_operand predicated operands.
* gcc.target/i386/avx512f-pr93673.c: New test.
* gcc.target/i386/avx512dq-pr93673.c: New test.
* gcc.target/i386/avx512bw-pr93673.c: New test.
The VEXTRACT* insns have way too many different CPUID feature flags (ATT
syntax)
vextractf128 $imm, %ymm, %xmm/mem AVX
vextracti128 $imm, %ymm, %xmm/mem AVX2
vextract{f,i}32x4 $imm, %ymm, %xmm/mem {k}{z} AVX512VL+AVX512F
vextract{f,i}32x4 $imm, %zmm, %xmm/mem {k}{z} AVX512F
vextract{f,i}64x2 $imm, %ymm, %xmm/mem {k}{z} AVX512VL+AVX512DQ
vextract{f,i}64x2 $imm, %zmm, %xmm/mem {k}{z} AVX512DQ
vextract{f,i}32x8 $imm, %zmm, %ymm/mem {k}{z} AVX512DQ
vextract{f,i}64x4 $imm, %zmm, %ymm/mem {k}{z} AVX512F
As the testcase shows and the patch too, we didn't get it right in all
cases.
The first hunk is about avx512vl_vextractf128v8s[if] incorrectly
requiring TARGET_AVX512DQ. The corresponding insn is the first
vextract{f,i}32x4 above, so it requires VL+F, and the builtins have it
correct (TARGET_AVX512VL implies TARGET_AVX512F):
BDESC (OPTION_MASK_ISA_AVX512VL, 0, CODE_FOR_avx512vl_vextractf128v8sf, "__builtin_ia32_extractf32x4_256_mask", IX86_BUILTIN_EXTRACTF32X4_256, UNKNOWN, (int) V4SF_FTYPE_V8SF_INT_V4SF_UQI)
BDESC (OPTION_MASK_ISA_AVX512VL, 0, CODE_FOR_avx512vl_vextractf128v8si, "__builtin_ia32_extracti32x4_256_mask", IX86_BUILTIN_EXTRACTI32X4_256, UNKNOWN, (int) V4SI_FTYPE_V8SI_INT_V4SI_UQI)
We only need TARGET_AVX512DQ for avx512vl_vextractf128v4d[if].
The second hunk is about vec_extract_lo_v16s[if]{,_mask}. These are using
the vextract{f,i}32x8 insns (AVX512DQ above), but we weren't requiring that,
but instead incorrectly && 1 for non-masked and && (64 == 64 && TARGET_AVX512VL)
for masked insns. This is extraction from ZMM, so it doesn't need VL for
anything. The hunk actually only requires TARGET_AVX512DQ when the insn
is masked, if it is not masked, when TARGET_AVX512DQ isn't available we can
use vextract{f,i}64x4 instead which is available already in TARGET_AVX512F
and does the same thing, extracts the low 256 bits from 512 bits vector
(often we split it into just nothing, but there are some special cases like
when using xmm16+ when we can't without AVX512VL).
The last hunk is about vec_extract_lo_v8s[if]{,_mask}. The non-_mask
suffixed ones are ok already and just split into nothing (lowpart subreg).
The masked ones were incorrectly requiring TARGET_AVX512VL and
TARGET_AVX512DQ, when we only need TARGET_AVX512VL.
2020-02-12 Jakub Jelinek <jakub@redhat.com>
PR target/93670
* config/i386/sse.md (VI48F_256_DQ): New mode iterator.
(avx512vl_vextractf128<mode>): Use it instead of VI48F_256. Remove
TARGET_AVX512DQ from condition.
(vec_extract_lo_<mode><mask_name>): Use <mask_avx512dq_condition>
instead of <mask_mode512bit_condition> in condition. If
TARGET_AVX512DQ is false, emit vextract*64x4 instead of
vextract*32x8.
(vec_extract_lo_<mode><mask_name>): Drop <mask_avx512dq_condition>
from condition.
* gcc.target/i386/avx512vl-pr93670.c: New test.
As mentioned in the PR, for -mavx -mno-avx2 the backend does support
vcondv4div4df and vcondv8siv8sf optabs (while generally 32-byte vectors
aren't much supported in that case, it is performed using
vandps/vandnps/vorps). The problem is that after the last generic vector
lowering (where the VEC_COND_EXPR still compares two V4DF vectors and
has two V4DI last operands and V4DI result and so is considered ok) fre4
folds the condition into constant, at which point the middle-end during
expansion will try vcond_mask_optab and fall back to trying to expand it
as the constant vector < 0 vcondv4div4di, but neither of them is supported
for -mavx -mno-avx2 and thus we ICE.
So, the options I see is either what the following patch does, also support
vcond_mask_v4div4di and vcond_mask_v4siv4si already for TARGET_AVX, or
require for vcondv4div4df and vcondv8siv8sf TARGET_AVX2 rather than current
TARGET_AVX.
2020-02-10 Jakub Jelinek <jakub@redhat.com>
PR target/93637
* config/i386/sse.md (VI_256_AVX2): New mode iterator.
(vcond_mask_<mode><sseintvecmodelower>): Use it instead of VI_256.
Change condition from TARGET_AVX2 to TARGET_AVX.
* gcc.target/i386/avx-pr93637.c: New test.
On Tue, Feb 04, 2020 at 11:16:06AM +0100, Uros Bizjak wrote:
> I guess that Comment #9 patch form the PR should be trivially correct,
> but althouhg it looks obvious, I don't want to propose the patch since
> I have no means of testing it.
I don't have means of testing it either.
https://docs.microsoft.com/en-us/cpp/build/x64-calling-convention?view=vs-2019
is quite explicit that [xyz]mm16-31 are call clobbered and only xmm6-15 (low
128-bits only) are call preserved.
We are talking e.g. about
/* { dg-options "-O2 -mabi=ms -mavx512vl" } */
typedef double V __attribute__((vector_size (16)));
void foo (void);
V bar (void);
void baz (V);
void
qux (void)
{
V c;
{
register V a __asm ("xmm18");
V b = bar ();
asm ("" : "=x" (a) : "0" (b));
c = a;
}
foo ();
{
register V d __asm ("xmm18");
V e;
d = c;
asm ("" : "=x" (e) : "0" (d));
baz (e);
}
}
where according to the MSDN doc gcc incorrectly holds the c value
in xmm18 register across the foo call; if foo is compiled by some Microsoft
compiler (or LLVM), then it could clobber %xmm18.
If all xmm18 occurrences are changed to say xmm15, then it is valid to hold
the 128-bit value across the foo call (though, surprisingly, LLVM saves it
into stack anyway).
The other parts are I guess mainly about SEH. Consider e.g.
void
foo (void)
{
register double x __asm ("xmm14");
register double y __asm ("xmm18");
asm ("" : "=x" (x));
asm ("" : "=v" (y));
x += y;
y += x;
asm ("" : : "x" (x));
asm ("" : : "v" (y));
}
looking at cross-compiler output, with -O2 -mavx512f this emits
.file "abcdeq.c"
.text
.align 16
.globl foo
.def foo; .scl 2; .type 32; .endef
.seh_proc foo
foo:
subq $40, %rsp
.seh_stackalloc 40
vmovaps %xmm14, (%rsp)
.seh_savexmm %xmm14, 0
vmovaps %xmm18, 16(%rsp)
.seh_savexmm %xmm18, 16
.seh_endprologue
vaddsd %xmm18, %xmm14, %xmm14
vaddsd %xmm18, %xmm14, %xmm18
vmovaps (%rsp), %xmm14
vmovaps 16(%rsp), %xmm18
addq $40, %rsp
ret
.seh_endproc
.ident "GCC: (GNU) 10.0.1 20200207 (experimental)"
Does whatever assembler mingw64 uses even assemble this (I mean the
.seh_savexmm %xmm16, 16 could be problematic)?
I can find e.g.
https://stackoverflow.com/questions/43152633/invalid-register-for-seh-savexmm-in-cygwin/43210527
which then links to
https://gcc.gnu.org/PR65782
2020-02-08 Uroš Bizjak <ubizjak@gmail.com>
Jakub Jelinek <jakub@redhat.com>
PR target/65782
* config/i386/i386.h (CALL_USED_REGISTERS): Make
xmm16-xmm31 call-used even in 64-bit ms-abi.
* gcc.target/i386/pr65782.c: New test.
Co-authored-by: Uroš Bizjak <ubizjak@gmail.com>
As the following testcase shows, we need to consider even target to be a construct
that forces not to use copy in/out for shared on parallel inside of the target.
E.g. for parallel nested inside another parallel or host teams, we already avoid
copy in/out and we need to treat target the same.
2020-02-06 Jakub Jelinek <jakub@redhat.com>
PR libgomp/93515
* omp-low.c (use_pointer_for_field): For nested constructs, also
look for map clauses on target construct.
(scan_omp_1_stmt) <case GIMPLE_OMP_TARGET>: Bump temporarily
taskreg_nesting_level.
* testsuite/libgomp.c-c++-common/pr93515.c: New test.
If we call omp_add_variable, following omp_notice_variable will already find it
on that construct and not go through outer constructs, the following patch fixes that.
Note, this still doesn't follow OpenMP 5.0 semantics on target combined with other
constructs with reduction/lastprivate/linear clauses, will handle that for GCC11.
2020-02-06 Jakub Jelinek <jakub@redhat.com>
PR libgomp/93515
* gimplify.c (gimplify_scan_omp_clauses) <do_notice>: If adding
shared clause, call omp_notice_variable on outer context if any.
In C++ we weren't calling mark_exp_read on the __builtin_convertvector first
argument. I guess it could misbehave even with lambda implicit captures.
Fixed by calling decay_conversion on the argument, we use the argument as
rvalue so we want the standard lvalue to rvalue conversions, but as the
argument must be a vector type, e.g. integral promotions aren't really
needed.
2020-02-05 Jakub Jelinek <jakub@redhat.com>
PR c++/93557
* semantics.c (cp_build_vec_convert): Call decay_conversion on arg
prior to passing it to c_build_vec_convert.
* c-c++-common/Wunused-var-17.c: New test.
The testcases ICE because when processing the declare simd inbranch,
we don't create the i == 0 clone as it already exists, which means
clone_info->nargs is not adjusted, but we then rely on it being adjusted
when trying other clones.
2020-02-05 Jakub Jelinek <jakub@redhat.com>
PR middle-end/93555
* omp-simd-clone.c (expand_simd_clones): If simd_clone_mangle or
simd_clone_create failed when i == 0, adjust clone->nargs by
clone->inbranch.
* c-c++-common/gomp/pr93555-1.c: New test.
* c-c++-common/gomp/pr93555-2.c: New test.
* gfortran.dg/gomp/pr93555.f90: New test.
What happens on this testcase is with the out of bounds rotate we get:
Trying 13 -> 16:
13: r129:SI=r132:DI#0<-<0x20
REG_DEAD r132:DI
16: r123:DI=r129:SI<0
REG_DEAD r129:SI
Successfully matched this instruction:
(set (reg/v:DI 123 [ <retval> ])
(const_int 0 [0]))
during combine. So, perhaps we could also change simplify-rtx.c to punt
if it is out of bounds rather than trying to optimize anything.
Or, but probably GCC11 material, if we decide that ROTATE/ROTATERT doesn't
have out of bounds counts or introduce targetm.rotate_truncation_mask,
we should truncate the argument instead of punting.
Punting is better for backports though.
2020-01-30 Jakub Jelinek <jakub@redhat.com>
PR middle-end/93505
* combine.c (simplify_comparison) <case ROTATE>: Punt on out of range
rotate counts.
* gcc.c-torture/compile/pr93505.c: New test.
If the typeinfo decls appear in OpenMP default(none) regions, as we no longer
predetermine const with no mutable members, they are diagnosed as errors,
but it isn't something the users can actually provide explicit sharing for in
the clauses.
2020-01-29 Jakub Jelinek <jakub@redhat.com>
PR c++/91118
* cp-gimplify.c (cxx_omp_predetermined_sharing): Return
OMP_CLAUSE_DEFAULT_SHARED for typeinfo decls.
* g++.dg/gomp/pr91118-1.C: New test.
* g++.dg/gomp/pr91118-2.C: New test.
As the testcase shows, some EXEC_OACC_* codes weren't handled in
oacc_code_to_statement. Fixed thusly.
2020-01-29 Jakub Jelinek <jakub@redhat.com>
PR fortran/93463
* openmp.c (oacc_code_to_statement): Handle
EXEC_OACC_{ROUTINE,UPDATE,WAIT,CACHE,{ENTER,EXIT}_DATA,DECLARE}.
* gfortran.dg/goacc/pr93463.f90: New test.
The following testcase is miscompiled, because the variable shift left
operand, { -1, -1, -1, -1 } is represented as a VECTOR_CST with
VECTOR_CST_NPATTERNS 1 and VECTOR_CST_NELTS_PER_PATTERN 1, so when
we call builder.new_unary_operation, builder.encoded_nelts () will be just 1
and thus we encode the resulting vector as if all the elements were the
same.
For non-masked is_vshift, we could perhaps call builder.new_binary_operation
(TREE_TYPE (args[0]), args[0], args[1], false), but then there are masked
shifts, for non-is_vshift we could perhaps call it too but with args[2]
instead of args[1], but there is no builder.new_ternary_operation.
All this stuff is primarily for aarch64 anyway, on x86 we don't have any
variable length vectors, and it is not a big deal to compute all elements
and just let builder.finalize () find the most efficient VECTOR_CST
representation of the vector. So, instead of doing too much, this just
keeps using new_unary_operation only if only one VECTOR_CST is involved
(i.e. non-masked shift by constant) and for the rest just compute all elts.
2020-01-28 Jakub Jelinek <jakub@redhat.com>
PR target/93418
* config/i386/i386.c (ix86_fold_builtin) <do_shift>: If mask is not
-1 or is_vshift is true, use new_vector with number of elts npatterns
rather than new_unary_operation.
* gcc.target/i386/avx2-pr93418.c: New test.
The following testcase is miscompiled, because the postreload pass changes:
-(insn 14 13 23 2 (parallel [
- (set (reg:DI 1 dx [94])
- (plus:DI (reg:DI 1 dx [95])
- (reg:DI 5 di [92])))
- (clobber (reg:CC 17 flags))
- ]) "pr93402.c":8:30 186 {*adddi_1}
- (expr_list:REG_EQUAL (plus:DI (reg:DI 5 di [92])
- (const_int 111111111111 [0x19debd01c7]))
- (nil)))
-(insn 23 14 25 2 (set (reg:SI 0 ax)
+(insn 23 13 25 2 (set (reg:SI 0 ax)
(const_int 0 [0])) "pr93402.c":10:1 67 {*movsi_internal}
(nil))
(insn 25 23 26 2 (use (reg:SI 0 ax)) "pr93402.c":10:1 -1
(nil))
-(insn 26 25 35 2 (use (reg:DI 1 dx)) "pr93402.c":10:1 -1
+(insn 26 25 35 2 (use (plus:DI (reg:DI 1 dx [95])
+ (reg:DI 5 di [92]))) "pr93402.c":10:1 -1
(nil))
A USE insn is not a normal insn and verify_changes called from
apply_change_group is happy about any changes into it.
The following patch avoids this optimization if we were to change
the USE operand (this routine only changes a reg into (plus reg reg2)).
2020-01-23 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/93402
* postreload.c (reload_combine_recognize_pattern): Don't try to adjust
USE insns.
* gcc.c-torture/execute/pr93402.c: New test.
This fixes a fall-out from a patch I had submitted two years ago which started
allowing simplify-rtx to fold logical right shifts by offsets a followed by b
into >> (a + b).
However this can generate inefficient code when the resulting shift count ends
up being the same as the size of the shift mode. This will create some
undefined behavior on most platforms.
This patch changes to code to truncate to 0 if the shift amount goes out of
range. Before my older patch this used to happen in combine when it saw the
two shifts. However since we combine them here combine never gets a chance to
truncate them.
The issue mostly affects GCC 8 and 9 since on 10 the back-end knows how to deal
with this shift constant but it's better to do the right thing in simplify-rtx.
Note that this doesn't take care of the Arithmetic shift where you could replace
the constant with MODE_BITS (mode) - 1, but that's not a regression so punting it.
gcc/ChangeLog:
Backport from mainline
2020-01-31 Tamar Christina <tamar.christina@arm.com>
PR rtl-optimization/91838
* simplify-rtx.c (simplify_binary_operation_1): Update LSHIFTRT case
to truncate if allowed or reject combination.
gcc/testsuite/ChangeLog:
Backport from mainline
2020-01-31 Tamar Christina <tamar.christina@arm.com>
Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/91838
* g++.dg/opt/pr91838.C: New test.
Linux CET kernel places a restore token on shadow stack for signal
handler to enhance security. The restore token is 8 byte and aligned
to 8 bytes. It is usually transparent to user programs since kernel
will pop the restore token when signal handler returns. But when an
exception is thrown from a signal handler, now we need to pop the
restore token from shadow stack. For x86-64, we just need to treat
the signal frame as normal frame. For i386, we need to search for
the restore token to check if the original shadow stack is 8 byte
aligned. If the original shadow stack is 8 byte aligned, we just
need to pop 2 slots, one restore token, from shadow stack. Otherwise,
we need to pop 3 slots, one restore token + 4 byte padding, from
shadow stack.
This patch also includes 2 tests, one has a restore token with 4 byte
padding and one without.
Tested on Linux/x86-64 CET machine with and without -m32.
libgcc/
Backport from mainline
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
New.
gcc/testsuite/
Backport from mainline
PR libgcc/85334
* g++.target/i386/pr85334-1.C: New test.
* g++.target/i386/pr85334-2.C: Likewise.
(cherry picked from commit bf6465d046)
2020-01-30 John David Anglin <danglin@gcc.gnu.org>
* config/pa/pa.c (pa_elf_select_rtx_section): Place function pointers
without a DECL in .data.rel.ro.local.
Since expand_stack_vars and such know how to deal with variables aligned
beyond MAX_SUPPORTED_STACK_ALIGNMENT, we shouldn't reject alignas of large
alignments. And if we don't do that, there's no point in having
check_cxx_fundamental_alignment_constraints at all, since
check_user_alignment already enforces MAX_OFILE_ALIGNMENT.
PR c++/89357
* c-attribs.c (check_cxx_fundamental_alignment_constraints): Remove.
This is a workaround that emits a BTI after the function label if that
is followed by a patch area. We try to remove the BTI that follows the
patch area (this may fail e.g. if the first instruction is a PACIASP).
So before this commit -fpatchable-function-entry=3,1 with bti generates
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
foo:
nop
nop
bti c // or paciasp
...
and after this commit
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
foo:
bti c
nop
nop
// may be paciasp
...
and with -fpatchable-function-entry=1 (M=0) the code now is
foo:
bti c
.section __patchable_function_entries
.8byte .LPFE
.text
.LPFE:
nop
// may be paciasp
...
There is a new bti insn in the middle of the patchable area users need
to be aware of unless M=0 (patch area is after the new bti) or M=N
(patch area is before the label, no new bti). Note: bti is not added to
all functions consistently (it can be turned off per function using a
target attribute or the compiler may detect that the function is never
called indirectly), so if bti is inserted in the middle of a patch area
then user code needs to deal with detecting it.
Tested on aarch64-none-linux-gnu.
gcc/ChangeLog:
PR target/92424
* config/aarch64/aarch64.c (aarch64_declare_function_name): Set
cfun->machine->label_is_assembled.
(aarch64_print_patchable_function_entry): New.
(TARGET_ASM_PRINT_PATCHABLE_FUNCTION_ENTRY): Define.
* config/aarch64/aarch64.h (struct machine_function): New field,
label_is_assembled.
gcc/testsuite/ChangeLog:
PR target/92424
* gcc.target/aarch64/pr92424-2.c: New test.
* gcc.target/aarch64/pr92424-3.c: New test.
When I implemented the [over.match.ref] rule that a reference conversion
function needs to match l/rvalue of the target reference type it changed our
handling of this testcase. It seems to me that our current behavior is what
the standard says, but it doesn't seem desirable, and all the other
compilers have our old behavior. So let's limit the change to non-templates
until there's some clarification from the committee.
PR c++/90546
* call.c (build_user_type_conversion_1): Allow a template conversion
returning an rvalue reference to bind directly to an lvalue.
We just need to handle the exception specification like other properties of
a function typedef.
PR c++/90731
* decl.c (grokdeclarator): Propagate eh spec from typedef.
Since Martin Sebor's patch for PR 71625 to change braced array initializers
to STRING_CST in some cases, we need to be ready for STRING_CST with types
that are changed by tsubst. fold_convert doesn't know how to deal with
STRING_CST, which is reasonable; we really shouldn't expect it to here. So
let's handle STRING_CST separately.
PR c++/90966
* pt.c (tsubst_copy) [STRING_CST]: Don't use fold_convert.
Here the problem was that we were remembering the lookup in template scope,
and then trying to reuse that lookup in the instantiation without
substituting into it at all. The simplest solution is to not try to
remember a lookup that finds a class-scope declaration, as in that case
doing the normal lookup again at instantiation time will always find the
right declarations.
PR c++/93279 - ICE with lambda in member operator.
* name-lookup.c (maybe_save_operator_binding): Don't remember
class-scope bindings.
My changes to is_nested_namespace broke is_ancestor's use where a namespace
alias might be passed in. This changes is_ancestor to look through the alias.
PR c++/91826
* name-lookup.c (is_ancestor): Allow CHILD to be a namespace alias.
The separate shrinkwrapping pass may insert stores in the middle
of atomics loops which can cause issues on some implementations.
Avoid this by delaying splitting atomics patterns until after
prolog/epilog generation.
gcc/
PR target/92692
* config/aarch64/aarch64.c (aarch64_split_compare_and_swap)
Add assert to ensure prolog has been emitted.
(aarch64_split_atomic_op): Likewise.
* config/aarch64/atomics.md (aarch64_compare_and_swap<mode>)
Use epilogue_completed rather than reload_completed.
(aarch64_atomic_exchange<mode>): Likewise.
(aarch64_atomic_<atomic_optab><mode>): Likewise.
(atomic_nand<mode>): Likewise.
(aarch64_atomic_fetch_<atomic_optab><mode>): Likewise.
(atomic_fetch_nand<mode>): Likewise.
(aarch64_atomic_<atomic_optab>_fetch<mode>): Likewise.
(atomic_nand_fetch<mode>): Likewise.
(cherry picked from commit e5e07b6818)
The new gcc.target/i386/pr91298-?.c testcases FAIL on Solaris/x86 with the
native assembler:
FAIL: gcc.target/i386/pr91298-1.c (test for excess errors)
Excess errors:
Assembler: pr91298-1.c
"/var/tmp//ccE6r3xb.s", line 5 : Syntax error
Near line: " .globl $quux"
"/var/tmp//ccE6r3xb.s", line 6 : Syntax error
Near line: " .type $quux, @function"
"/var/tmp//ccE6r3xb.s", line 7 : Syntax error
Near line: "$quux:"
"/var/tmp//ccE6r3xb.s", line 15 : Syntax error
Near line: " .size $quux, .-$quux"
"/var/tmp//ccE6r3xb.s", line 24 : Syntax error
Near line: " movl $($a), %eax"
"/var/tmp//ccE6r3xb.s", line 38 : Syntax error
Near line: " leal ($a)(,%eax,4), %eax"
"/var/tmp//ccE6r3xb.s", line 51 : Syntax error
Near line: " movl ($a), %eax"
"/var/tmp//ccE6r3xb.s", line 63 : Syntax error
Near line: " movl ($a)+16, %eax"
"/var/tmp//ccE6r3xb.s", line 97 : Syntax error
Near line: " movl $($quux), %eax"
"/var/tmp//ccE6r3xb.s", line 101 : Syntax error
Near line: " .globl $a"
"/var/tmp//ccE6r3xb.s", line 104 : Syntax error
Near line: " .type $a, @object"
"/var/tmp//ccE6r3xb.s", line 105 : Syntax error
Near line: " .size $a, 72"
"/var/tmp//ccE6r3xb.s", line 106 : Syntax error
Near line: "$a:"
"/var/tmp//ccE6r3xb.s", line 228 : Syntax error
Near line: " .long ($a)"
FAIL: gcc.target/i386/pr91298-2.c (test for excess errors)
It only allows letters, digits, '_' and '.' in identifiers:
https://docs.oracle.com/cd/E37838_01/html/E61064/eqbsx.html#XALRMeoqjw
For lack of an effective-target keyword matching -fdollars-in-identifiers,
this patch fixes this by xfailing them on *-*-solaris2.* && !gas.
Tested on i386-pc-solaris2.11 with as and gas and x86_64-pc-linux-gnu.
* gcc.target/i386/pr91298-1.c: xfail on Solaris/x86 with native
assembler.
* gcc.target/i386/pr91298-2.c: Likewise.
Another place we need to unshare cached expressions.
PR c++/92852 - ICE with generic lambda and reference var.
* constexpr.c (maybe_constant_value): Likewise.
The previous rule could leave an incomplete file if the build was
interrupted, which would then not be remade if make was run again.
This makes the rule more robust by writing to a temporary file and only
moving it into place as the final step. It also simplifies the rule so
that only the essential macro definitions are written to the file, not
the explanatory comments and commented out #undef lines.
Also, the macro for enabling LFS on Mac OS X 10.5 is now set
unconditionally, which is a bug fix from upstream autoconf.
Backport from mainline
2020-01-23 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/91947
* include/Makefile.am (${host_builddir}/largefile-config.h): Simplify
rule.
* include/Makefile.in: Regenerate.
The two patterns that call aarch64_expand_subvti ensure that {low,high}_in1
is a register, while {low,high}_in2 can be a register or immediate.
subdi3_compare1_imm uses the aarch64_plus_immediate predicate for its last
two operands (the value and negated value), but aarch64_expand_subvti calls
it whenever low_in2 is a CONST_INT, which leads to ICEs during vregs pass,
as the emitted insn is not recognized as valid subdi3_compare1_imm.
The following patch fixes that by only using subdi3_compare1_imm if it is ok
to do so, and otherwise force the constant into register and use the
non-immediate version - subdi3_compare1.
Furthermore, previously the code was calling force_reg on high_in2 only if
low_in2 is CONST_INT, on the (reasonable) assumption is that only if low_in2
is a CONST_INT, high_in2 can be non-REG, but with the above changes even in
the else we might have CONST_INT and force_reg doesn't do anything if the
operand is already a REG, so this patch calls it unconditionally.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/93335
* config/aarch64/aarch64.c (aarch64_expand_subvti): Only use
gen_subdi3_compare1_imm if low_in2 satisfies aarch64_plus_immediate
predicate, not whenever it is CONST_INT. Otherwise, force_reg it.
Call force_reg on high_in2 unconditionally.
* gcc.c-torture/compile/pr93335.c: New test.
In AT&T syntax leading $ is special, so if we have identifiers that start
with dollar, we usually fail to assemble it (or assemble incorrectly).
As mentioned in the PR, what works is wrapping the identifiers inside of
parens, like:
movl $($a), %eax
leaq ($a)(,%rdi,4), %rax
movl ($a)(%rip), %eax
movl ($a)+16(%rip), %eax
.globl $a
.type $a, @object
.size $a, 72
$a:
.string "$a"
.quad ($a)
(this is x86_64 -fno-pic -O2). In some places ($a) is not accepted,
like as .globl operand, in .type, .size, so the patch overrides
ASM_OUTPUT_SYMBOL_REF rather than e.g. ASM_OUTPUT_LABELREF.
I didn't want to duplicate what assemble_name is doing (following
transparent aliases), so split assemble_name into two parts; just
mere looking at the first character of a name before calling assemble_name
wouldn't be good enough, a transparent alias could lead from a name
not starting with $ to one starting with it and vice versa.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR target/91298
* output.h (assemble_name_resolve): Declare.
* varasm.c (assemble_name_resolve): New function.
(assemble_name): Use it.
* config/i386/i386.h (ASM_OUTPUT_SYMBOL_REF): Define.
* gcc.target/i386/pr91298-1.c: New test.
* gcc.target/i386/pr91298-2.c: New test.
The omp_code_to_statement function added with the initial OpenACC support
only handled small subset of the OpenMP statements, leading to ICE if
any other OpenMP directive appeared inside of OpenACC directive.
2020-01-22 Jakub Jelinek <jakub@redhat.com>
PR fortran/93329
* openmp.c (omp_code_to_statement): Handle remaining EXEC_OMP_*
cases.
* gfortran.dg/goacc/pr93329.f90: New test.
As mentioned in the PR, during combine rtx_costs can be called sometimes
even on RTL that has not been validated yet and so can contain even operands
that aren't valid in any instruction.
2020-01-21 Jakub Jelinek <jakub@redhat.com>
PR target/93333
* config/riscv/riscv.c (riscv_rtx_costs) <case ZERO_EXTRACT>: Verify
the last two operands are CONST_INT_P before using them as such.
* gcc.c-torture/compile/pr93333.c: New test.
The following testcase ICEs, because for TFmode the particular subtraction
pattern (*subtf3) is not enabled with the given options. Using
expand_simple_binop instead of emitting the subtraction by hand just moves
the ICE one insn later, NEG of ABS is not then recognized, etc., but
ultimately the problem is that when rs6000_emit_cmove is called for floating
point operand mode (and earlier condition ensures that in that case
compare_mode is also floating point), the expander makes sure the
operand mode is SFDF, but for the comparison mode nothing checks it, yet
there is just one *fsel* pattern with 2 separate SFDF iterators.
The following patch fixes it by giving up if compare_mode is not SFmode or
DFmode.
2020-01-21 Jakub Jelinek <jakub@redhat.com>
PR target/93073
* config/rs6000/rs6000.c (rs6000_emit_cmove): If using fsel, punt for
compare_mode other than SFmode or DFmode.
* gcc.target/powerpc/pr93073.c: New test.
As the following testcase shows, when deprecated attribute is on a template,
we'd never print the message if any, because the attribute is not
present on the TEMPLATE_DECL with which warn_deprecated_use is called,
but on its DECL_TEMPLATE_RESULT or its type.
2020-01-17 Jakub Jelinek <jakub@redhat.com>
PR c++/93228
* parser.c (cp_parser_template_name): Look up deprecated attribute
in DECL_TEMPLATE_RESULT or its type's attributes.
* g++.dg/cpp1y/attr-deprecated-3.C: New test.
As mentioned in the PR, the following testcase is miscompiled with avx512vl.
The reason is that the fma *_bcst_1 define_insns have two alternatives:
"=v,v" "0,v" "v,0" "m,m" and use the same
vfmadd213* %3<avx512bcst>, %2, %0<sd_mask_op4>
pattern. If the first alternative is chosen, everything is ok, but if the
second alternative is chosen, %2 and %0 are the same register, so instead
of doing dest=dest*another+membcst we do dest=dest*dest+membcst.
Now, to fix this, either we'd need separate:
"vfmadd213<ssemodesuffix>\t{%3<avx512bcst>, %2, %0<sd_mask_op4>|%0<sd_mask_op4>, %2, %3<avx512bcst>}
vfmadd213<ssemodesuffix>\t{%3<avx512bcst>, %1, %0<sd_mask_op4>|%0<sd_mask_op4>, %1, %3<avx512bcst>}"
where for the second alternative, we'd just use %1 instead of %2, but
what I think is actually cleaner is just use a single alternative and
make the two multiplication operands commutative, which they really are.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
PR target/93009
* config/i386/sse.md
(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1): Use
just a single alternative instead of two, make operands 1 and 2
commutative.
* gcc.target/i386/avx512vl-pr93009.c: New test.
PR libgomp/93219
* libgomp.h (gomp_print_string): Change return type from void to int.
* affinity-fmt.c (gomp_print_string): Likewise. Return true if
not all characters have been written.
PR rtl-optimization/93088
* loop-iv.c (find_single_def_src): Punt after looking through
128 reg copies for regs with single definitions. Move definitions
to first uses.
* gcc.target/i386/pr93088.c: New test.
PR ipa/93087
* predict.c (compute_function_frequency): Don't call
warn_function_cold on functions that already have cold attribute.
* c-c++-common/cold-1.c: New test.
PR c++/92438
* parser.c (cp_parser_constructor_declarator_p): If open paren
is followed by RID_ATTRIBUTE, skip over the attribute tokens and
try to parse type specifier.
* g++.dg/ext/attrib61.C: New test.
PR c++/92992
* call.c (convert_arg_to_ellipsis): For decltype(nullptr) arguments
that have side-effects use cp_build_compound_expr.
* g++.dg/cpp0x/nullptr45.C: New test.
Bug 93348 reports an ICE on certain cases of casts of expressions that
may appear only in unevaluated parts of integer constant expressions,
arising from the generation of nested C_MAYBE_CONST_EXPRs. This patch
fixes it by adding a call to remove_c_maybe_const_expr in the
integer-operands case, as is done in other similar cases.
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/93348
gcc/c:
* c-typeck.c (build_c_cast): Call remove_c_maybe_const_expr on
argument with integer operands.
gcc/testsuite:
* gcc.c-torture/compile/pr93348-1.c: New test.
(cherry picked from commit ac68e287fc)
2020-01-21 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Backport from mainline
PR libfortran/93234
* io/unit.c (set_internal_unit): Set round and sign flags
correctly.
* gfortran.dg/inquire_pre.f90: New test.
Starting with the introduction of TYPE_TYPELESS_STORAGE the situation
of having a alias-set zero aggregate field became more common which
prevents recording alias-sets of fields of said aggregate as subset
of the outer aggregate. component_uses_parent_alias_set_from in the
past fended off some of the issues with that but the alias oracles
use of the alias set of the base of an access path never appropriately
handled it.
The following makes it so that alias-sets of fields of alias-set zero
aggregate fields are still recorded as subset of the container.
2020-01-14 Richard Biener <rguenther@suse.de>
PR middle-end/93246
* alias.c (record_component_aliases): Take superset to record
into, recurse for alias-set zero fields.
(record_component_aliases): New oveerload wrapping around the above.
* g++.dg/torture/pr93246.C: New testcase.
Backport from mainline
2020-01-16 Martin Liska <mliska@suse.cz>
* lto-partition.c (lto_balanced_map): Remember
best_noreorder_pos and then restore to it
when we revert.
Clean up references to SVN in in the GCC docs, redirecting to Git
documentation as appropriate.
Where references to "the source code repository" rather than a
specific VCS make sense, I have used them. You might, after
all, change VCSes again someday.
I have not modified either generated HTML files nor maintainer scripts.
These changes should be complete with repect to the documentation tree.
2020-01-19 Eric S. Raymond <esr@thyrsus.com>
Sandra Loosemore <sandra@codesourcery.com>
Partial backport from mainline:
2020-01-19 Eric S. Raymond <esr@thyrsus.com>
gcc/
* doc/contribute.texi: Update for SVN -> Git transition.
* doc/install.texi: Likewise.
libstdc++-v3
* doc/xml/faq.xml: Update for SVN -> Git transition.
* doc/xml/manual/appendix_contributing.xml: Likewise.
This was failing because uses_template_parms didn't recognize LAMBDA_EXPR as
a kind of expression. Instead of trying to enumerate all the different
varieties of expression and then aborting if what's left isn't
error_mark_node, let's handle error_mark_node and then assume anything else
is an expression.
* pt.c (uses_template_parms): Don't try to enumerate all the
expression cases.
Here we had been recursing in tsubst_copy_and_build if type2 was a TREE_LIST
because that function knew how to deal with pack expansions, and tsubst
didn't. But tsubst_copy_and_build expects to be dealing with expressions,
so we crash when trying to convert_from_reference a type.
* pt.c (tsubst) [TREE_LIST]: Handle pack expansion.
(tsubst_copy_and_build) [TRAIT_EXPR]: Always use tsubst for type2.
The use of -fno-automatic should not affect the save attribute of a
recursive procedure. The first test case checks unsaved variables
and the second checks saved variables.
Bug 93072 is a case where the C front end (a) wrongly interprets an
inline declaration at block scope as indicating that DECL_CONTEXT
should be set for an inline function and (b) this results in an ICE.
This is a regression resulting from a previous fix of mine for other
bugs involving such declarations being wrongly interpreted elsewhere
as nested function declarations. The fix is similar to the previous
fix: use TREE_PUBLIC instead of DECL_EXTERNAL in another place as the
relevant test to determine whether to set DECL_CONTEXT. (When a
variable reaches the code in question in pushdecl, the two are
equivalent.)
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/93072
gcc/c:
* c-decl.c (pushdecl): Use TREE_PUBLIC, not DECL_EXTERNAL, to
determine whether to set DECL_CONTEXT.
gcc/testsuite:
* gcc.dg/inline-42.c, gcc.dg/inline-43.c: New tests.
(cherry picked from commit e2346a33b0)
PR target/93254
* config/i386/i386.md (*movsf_internal): Require SSE2 ISA for
alternatives 9 and 10. Do not require SSE2 ISA for alternatives
14 and 15.
Bug 93241 reports a case where certain C expressions involving casts,
that would not be valid in an evaluated part of an integer constant
expression (because of e.g. involving integer overflow), are wrongly
rejected in an unevaluated part of an integer constant expression even
though all the operands and operations are ones that are valid in that
context. This is a rejects-valid regression in GCC 4.5 and later
relative to 4.4 (for some testcases; the one in the bug uses
_Static_assert which isn't supported in those older releases).
The rule in the C front end is that an expression with those
properties (valid in an unevaluated part of an integer constant
expression but not an evaluated part) must be represented either as an
INTEGER_CST with TREE_OVERFLOW set or as a C_MAYBE_CONST_EXPR with
C_MAYBE_CONST_EXPR_INT_OPERANDS set. This patch fixes build_c_cast to
check for that case and call note_integer_operands as needed.
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/93241
gcc/c:
* c-typeck.c (build_c_cast): Check for expressions with integer
operands that can occur in an unevaluated part of an integer
constant expression and call note_integer_operands as needed.
gcc/testsuite:
* gcc.dg/c11-static-assert-10.c, gcc.dg/c99-const-expr-15.c: New
tests.
(cherry picked from commit 3d77686d2e)
Enable AC_SYS_LARGEFILE to set the macros needed for large file APIs to
be used by default. We do not want to define those macros in the
public headers that users include. The values of the macros are copied
to a separate file that is only included by the filesystem sources
during the build, and then the macros in <bits/c++config.h> are renamed
so that they don't have any effect in user code including our headers.
Also use larger type for result of filesystem::file_size to avoid
truncation of large values on 32-bit systems (PR 91947).
Backport from mainlne
2019-10-04 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/81091
PR libstdc++/91947
* configure.ac: Use AC_SYS_LARGEFILE to enable 64-bit file APIs.
* config.h.in: Regenerate:
* configure: Regenerate:
* include/Makefile.am (${host_builddir}/largefile-config.h): New
target to generate config header for filesystem library.
(${host_builddir}/c++config.h): Rename macros for large file support.
* include/Makefile.in: Regenerate.
* src/c++17/fs_dir.cc: Include new config header.
* src/c++17/fs_ops.cc: Likewise.
(filesystem::file_size): Use uintmax_t for size.
* src/filesystem/dir.cc: Include new config header.
* src/filesystem/ops.cc: Likewise.
(experimental::filesystem::file_size): Use uintmax_t for size.
As reported in bug 91226, the libdecnumber code used on the host to
interpret DFP values in the BID encoding fails, for _Decimal64 and
_Decimal128, to check for the case where a significand is too large
and so specified in IEEE 754 to be a non-canonical encoding of the
zero significand. This patch adds the required handling of that case,
together with tests both using -O2 (testing this host code) and -O0
(testing libgcc code, which already worked before the patch); the
tests also cover _Decimal32, which already had the required check.
In the _Decimal128 case, where the code previously completely ignored
the case where the first four bits of the combination field are 1100,
1101 or 1110, the logic for determining the correct quantum exponent
in that case is also newly added by this patch, so tests are added for
that as well (again, libgcc already handled it correctly when the
conversion was done at runtime rather than at compile time).
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR middle-end/91226
libdecnumber:
* bid/bid2dpd_dpd2bid.c (_bid_to_dpd64): Handle non-canonical
significands.
(_bid_to_dpd128): Likewise. Check for case where combination
field starts 1100, 1101 or 1110.
gcc/testsuite:
* gcc.dg/dfp/bid-non-canonical-d128-1.c,
gcc.dg/dfp/bid-non-canonical-d128-2.c,
gcc.dg/dfp/bid-non-canonical-d128-3.c,
gcc.dg/dfp/bid-non-canonical-d128-4.c,
gcc.dg/dfp/bid-non-canonical-d32-1.c,
gcc.dg/dfp/bid-non-canonical-d32-2.c,
gcc.dg/dfp/bid-non-canonical-d64-1.c,
gcc.dg/dfp/bid-non-canonical-d64-2.c: New tests.
(cherry picked from commit 0fad54f0a8)
Will be needed for building subsequent releases on this branch from
git.
Backport:
2020-01-13 Joseph Myers <joseph@codesourcery.com>
* gcc_release: Use git instead of SVN.
2019-11-20 Janne Blomqvist <jb@gcc.gnu.org>
* gcc_release: Use https for gcc.gnu.org.
When only the rmprofile multilibs are built, compiling for armv7-a
should select the generic v7 multilibs. This used to work before +sec
and +mp were added to the architecture options but it was broken by
that update. This patch fixes those variants and adds some tests to
ensure that they remain fixed
gcc/ChangeLog:
2020-01-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
Backport from trunk
PR target/93188
* config/arm/t-multilib (MULTILIB_MATCHES): Add rules to match
armv7-a{+mp,+sec,+mp+sec} to appropriate armv7 multilib variants
when only building rm-profile multilibs.
gcc/testsuite/ChangeLog:
2020-01-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
Backport from trunk
* gcc.target/arm/multilib.exp: Add new tests for rm-profile only.
From-SVN: r280123
When gcc for Arm is configured with --with-multilib-list=aprofile a
misplaced endif directive in the makefile was causing the arm->thumb
mapping for multilibs to be omitted from the reuse rules. This
resulted in the default multilib being picked rather than the thumb2
opimized version.
2020-01-10 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
Backport from trunk
* config/arm/t-multilib: Use arm->thumb multilib reuse rules
on a-profile.
From-SVN: r280122
This prevents the vtables and RTTI from being emitted in every object
file that uses memory_resource and monotonic_buffer_resource.
Objects compiled by GCC 9.1 or 9.2 will contain inline definitions of
the destructors, vtable and RTTI, but this is harmless. The inline
definitions have identical effects to the ones that are now defined in
libstdc++.so so it doesn't matter if the inline ones are used instead of
calling the symbols exported from the runtime library.
PR libstdc++/93208
* config/abi/pre/gnu.ver: Add new exports.
* include/std/memory_resource (memory_resource::~memory_resource()):
Do not define inline.
(monotonic_buffer_resource::~monotonic_buffer_resource()): Likewise.
* src/c++17/memory_resource.cc (memory_resource::~memory_resource()):
Define.
(monotonic_buffer_resource::~monotonic_buffer_resource()): Define.
* testsuite/20_util/monotonic_buffer_resource/93208.cc: New test.
From-SVN: r280045
2020-01-09 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-12-12 Jan Hubicka <hubicka@ucw.cz>
* ipa-prop.c (read_ipcp_transformation_info): Fix undefined ordering
of execution of function call parameters.
From-SVN: r280037
When recursing into a directory, any errors that occur while removing a
directory entry are ignored, because the subsequent increment of the
directory iterator clears the error_code object.
This fixes that bug by checking the result of each recursive operation
before incrementing. This is a change in observable behaviour, because
previously other directory entries would still be removed even if one
(or more) couldn't be removed due to errors. Now the operation stops on
the first error, which is what the code intended to do all along. The
standard doesn't specify what happens in this case (because the order
that the entries are processed is unspecified anyway).
PR libstdc++/93201
* src/c++17/fs_ops.cc (remove_all(const path&, error_code&)): Check
result of recursive call before incrementing iterator.
* src/filesystem/ops.cc (remove_all(const path&, error_code&)):
Likewise.
* testsuite/27_io/filesystem/operations/remove_all.cc: Check errors
are reported correctly.
* testsuite/experimental/filesystem/operations/remove_all.cc: Likewise.
From-SVN: r280020
Backport from 2020-01-08 trunk r279995.
Add -nodevicespecs option for avr.
PR target/93182
* config/avr/avr.opt (-nodevicespecs): New driver option.
* config/avr/driver-avr.c (avr_devicespecs_file): Only issue
"-specs=device-specs/..." if that option is not set.
* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.
From-SVN: r279996
In the gc compiler, for slicing an array, its AST has an implicit
address operation node. There isn't such node in the gofrontend
AST. During the escape analysis, we create a fake node to mimic
the gc compiler's behavior. For the fake node, the loopdepth was
not tracked correctly, causing miscompilation. Since this is an
address operation, do the same thing as we do for the address
operator.
Fixesgolang/go#36404.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/213643
From-SVN: r279985
Recent platform linkers will no longer accept linking for a target
OS version less than 10.4. Recent SDKs no longer have the libgcc_s
shims used for 10.4 and 10.5. So we need to adjust tests that expect
these.
2020-01-07 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2020-01-05 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/darwin-version-1.c: Adjust test to use different
options for Darwin4-9 and Darwin10+.
From-SVN: r279975
* config/pa/pa.md: Revert change to use ordered_comparison_operator
instead of cmpib_comparison_operator in cmpib patterns.
* config/pa/predicates.md (cmpib_comparison_operator): Revert removal
of cmpib_comparison_operator. Revise comment.
From-SVN: r279928
PR c/90677
* cp-objcp-common.c (identifier_global_tag): Return NULL_TREE if name
has not been found, rather than error_mark_node.
* c-c++-common/pr90677-2.c: New test.
From-SVN: r279841
PR target/67834
* config/pa/pa.c (pa_elf_select_rtx_section): New. Put references to
COMDAT group function labels in .data.rel.ro.local section.
* config/pa/pa32-linux.h (TARGET_ASM_SELECT_RTX_SECTION): Define.
From-SVN: r279824
PR target/93111
* config/pa/pa.md (scc): Use ordered_comparison_operator instead of
comparison_operator in B and S integer comparisons. Likewise, use
ordered_comparison_operator instead of cmpib_comparison_operator in
cmpib patterns.
* config/pa/predicates.md (cmpib_comparison_operator): Remove.
From-SVN: r279819
Backport from mainline
2019-12-30 John David Anglin <danglin@gcc.gnu.org>
PR libgomp/93066
* inclhack.def (hpux_c99_inttypes3): Fix defines for INTPTR_MAX
and UINTPTR_MAX, and missing define for SIZE_MAX.
* fixincl.x: Regenerate.
* tests/base/inttypes.h: Update for above fix.
From-SVN: r279814
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/92961
* gfortran.h (gfc_seen_div0): Add declaration.
* arith.h (gfc_seen_div0): Add definition.
(eval_intrinsic): For integer division by zero, set gfc_seen_div0.
* decl.c (variable_decl): If resolution resp. simplification
fails for array spec and a division of zero error has been
seen, return MATCH_ERROR.
2019-12-30 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/92961
* gfortran.dg/arith_divide_2.f90: New test.
From-SVN: r279767
On Darwin10 it's possible to make a 32b PPC build using the
'Rosetta' emulator. However, these builds need to make use of
Darwin9 crts (for exes, dylibs and bundles). This adds the
change to cater for bundles.
gcc/ChangeLog:
Backport from mainline.
2019-12-14 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h (DARWIN_EXTRA_SPECS): Add new
bundle spec. (DARWIN_BUNDLE1_SPEC): New.
(STARTFILE_SPEC): Use darwin bundle spec.
* config/rs6000/darwin.h (DARWIN_BUNDLE1_SPEC): New.
(DARWIN_DYLIB1_SPEC): Delete duplicate.
From-SVN: r279732
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* expr.c (find_inquiry_ref): Catch INQUIRY_LEN case, where the
temporary expression has been converted to a constant and make
the new expression accordingly. Correct the error in INQUIRY_RE
and INQUIRY_IM cases. The original rather than the resolved
expression was being used as the source in mpfr_set.
2019-12-21 Paul Thomas <pault@gcc.gnu.org>
PR fortran/92753
* gfortran.dg/inquiry_type_ref_5.f90 : New test.
From-SVN: r279697
Backported from mainline
2019-12-19 Jakub Jelinek <jakub@redhat.com>
PR fortran/92977
* frontend-passes.c (call_external_blas): Use || instead of |.
PR fortran/92977
* frontend-passes.c (in_omp_atomic): New variable.
(cfe_expr_0, matmul_to_var_expr, matmul_temp_args,
inline_matmul_assign, call_external_blas): Don't optimize in
EXEC_OMP_ATOMIC.
(optimize_namespace): Clear in_omp_atomic.
(gfc_code_walker): Set in_omp_atomic for EXEC_OMP_ATOMIC, save/restore
it around.
* gfortran.dg/gomp/pr92977.f90: New test.
From-SVN: r279676
Backported from mainline
2019-12-14 Jakub Jelinek <jakub@redhat.com>
PR ipa/92357
* ipa-fnsummary.c (ipa_fn_summary_write): Use
lto_symtab_encoder_iterator with lsei_start_function_in_partition and
lsei_next_function_in_partition instead of walking all cgraph nodes
in encoder.
From-SVN: r279675
Backported from mainline
2019-12-12 Jakub Jelinek <jakub@redhat.com>
PR target/92904
* config/i386/i386.c (ix86_gimplify_va_arg): If need_intregs and
not need_temp, decrease alignment of the read because the GPR save
area only guarantees 8-byte alignment.
* gcc.c-torture/execute/pr92904.c: New test.
From-SVN: r279673
Backported from mainline
2019-12-11 Jakub Jelinek <jakub@redhat.com>
PR fortran/92899
* trans-openmp.c (gfc_trans_omp_atomic): For GFC_OMP_ATOMIC_SWAP,
do look through conversion on expr2 if any.
* testsuite/libgomp.fortran/atomic1.f90: New test.
From-SVN: r279672
Backported from mainline
2019-12-11 Jakub Jelinek <jakub@redhat.com>
PR target/92723
* tree-vect-patterns.c (vect_recog_rotate_pattern): If dt is not
vect_internal_def, use oprnd1 as is, without trying to cast it.
Formatting fix.
* gcc.dg/vect/pr92723.c: New test.
From-SVN: r279671
Backported from mainline
2019-12-06 Jakub Jelinek <jakub@redhat.com>
PR c++/92831 - CWG 1299, not extending temporary lifetime for ?:
* cp-tree.h (extend_ref_init_temps): Add a new argument with NULL
default arg.
* call.c (set_up_extended_ref_temp): Add COND_GUARD argument, pass it
down to extend_ref_init_temps. Before pushing cleanup, if COND_GUARD
is non-NULL, create a bool temporary if needed, initialize to false
and guard the cleanup with the temporary being true.
(extend_ref_init_temps_1): Add COND_GUARD argument, pass it down
to recursive calls and set_up_extended_ref_temp. Handle COND_EXPR.
(extend_ref_init_temps): Add COND_GUARD argument, pass it down to
recursive calls and to extend_ref_init_temps_1.
* g++.dg/cpp0x/temp-extend2.C: New test.
From-SVN: r279669
Backported from mainline
2019-12-05 Jakub Jelinek <jakub@redhat.com>
PR fortran/92781
* trans-decl.c (gfc_get_symbol_decl): If sym->backend_decl is
current_function_decl, add length to current rather than parent
function and expect DECL_CONTEXT (length) to be current_function_decl.
* gfortran.dg/pr92781.f90: New test.
From-SVN: r279667
PR fortran/92756
* omp-low.c (check_omp_nesting_restrictions): If lang_GNU_Fortran,
diagnose teams not closely nested inside of target.
Backported from mainline
2019-12-04 Jakub Jelinek <jakub@redhat.com>
PR fortran/92756
* gfortran.dg/gomp/teams1.f90: New test.
From-SVN: r279666
Backported from mainline
2019-12-03 Jakub Jelinek <jakub@redhat.com>
PR c++/92695
* constexpr.c (cxx_bind_parameters_in_call): For virtual calls,
adjust the first argument to point to the derived object rather
than its base.
* g++.dg/cpp2a/constexpr-virtual14.C: New test.
From-SVN: r279664
Backported from mainline
2019-12-02 Jakub Jelinek <jakub@redhat.com>
PR c++/92695
* constexpr.c (cxx_eval_constant_expression) <case OBJ_TYPE_REF>: Use
STRIP_NOPS before checking for ADDR_EXPR.
* g++.dg/cpp2a/constexpr-virtual15.C: New test.
From-SVN: r279663
Backported from mainline
2019-11-29 Jakub Jelinek <jakub@redhat.com>
PR c++/60228
* parser.c (cp_parser_omp_declare_reduction_exprs): If
processing_template_decl, wrap the combiner or initializer
into EXPR_STMT.
* decl.c (start_preparsed_function): Don't start a lambda scope
for DECL_OMP_DECLARE_REDUCTION_P functions.
(finish_function): Don't finish a lambda scope for
DECL_OMP_DECLARE_REDUCTION_P functions, nor cp_fold_function
them nor cp_genericize them.
* mangle.c (decl_mangling_context): Look through
DECL_OMP_DECLARE_REDUCTION_P functions.
* semantics.c (expand_or_defer_fn_1): For DECL_OMP_DECLARE_REDUCTION_P
functions, use tentative linkage, don't keep their bodies with
-fkeep-inline-functions and return false at the end.
* g++.dg/gomp/openmp-simd-2.C: Don't expect bodies for
DECL_OMP_DECLARE_REDUCTION_P functions.
* testsuite/libgomp.c++/udr-20.C: New test.
* testsuite/libgomp.c++/udr-21.C: New test.
From-SVN: r279662
Backported from mainline
2019-11-28 Jakub Jelinek <jakub@redhat.com>
PR c++/92695
* decl2.c (mark_used): Don't call note_vague_linkage_fn for pure
virtual functions, even if they are declared inline.
* g++.dg/warn/inline3.C: New test.
From-SVN: r279661
Backported from mainline
2019-11-27 Jakub Jelinek <jakub@redhat.com>
PR c++/92524
* tree.c (replace_placeholders_r): Don't walk constructor elts with
RANGE_EXPR indexes.
* g++.dg/cpp0x/pr92524.C: New test.
From-SVN: r279659
Backported from mainline
2019-11-27 Jakub Jelinek <jakub@redhat.com>
PR debug/92664
* dwarf2out.c (lookup_filename): Use "<stdin>" instead of "".
From-SVN: r279658
Backported from mainline
2019-11-26 Jakub Jelinek <jakub@redhat.com>
PR c++/92648
* parser.c (cp_parser_std_attribute): For unknown attributes,
skip balanced token seq instead of trying to parse
attribute-argument-clause as expression list.
* g++.dg/cpp0x/gen-attrs-71.C: New test.
From-SVN: r279655
Backported from mainline
2019-11-26 Jakub Jelinek <jakub@redhat.com>
PR c++/61414
* c-attribs.c (handle_mode_attribute): Add mode attribute to
ENUMERAL_TYPEs.
* class.c (enum_to_min_precision): New hash_map.
(enum_min_precision): New function.
(check_bitfield_decl): Use it.
* g++.dg/cpp0x/enum23.C: Remove xfail.
* g++.dg/cpp0x/enum28.C: New test.
From-SVN: r279654
Backported from mainline
2019-11-26 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/92644
* tree-ssa-phiopt.c (minmax_replacement): Add INTEGRAL_TYPE_P check
next to INTEGER_CST checks.
* g++.dg/opt/pr92644.C: New test.
From-SVN: r279652
Backported from mainline
2019-11-23 Jakub Jelinek <jakub@redhat.com>
PR target/92615
* config/i386/i386.c (ix86_md_asm_adjust): If dest_mode is
GET_MODE (dest), is not QImode, using ZERO_EXTEND and dest is not
register_operand, force x into register before storing it into dest.
Formatting fix.
* gcc.target/i386/pr92615.c: New test.
From-SVN: r279651
Backported from mainline
2019-11-21 Jakub Jelinek <jakub@redhat.com>
Jason Merrill <jason@redhat.com>
PR c++/90842
* parser.c (cp_parser_decl_specifier_seq): For concept or typedef
break early if CP_PARSER_FLAGS_ONLY_MUTABLE_OR_CONSTEXPR.
For type specifiers, set CP_PARSER_FLAGS_NO_TYPE_DEFINITIONS
if CP_PARSER_FLAGS_ONLY_MUTABLE_OR_CONSTEXPR is set.
* g++.dg/cpp1y/lambda-generic-90842.C: New test.
From-SVN: r279649
The backend emits 16 bit memory loads for single element character
vector. As a result the character will not be right justified in the
GPR.
gcc/ChangeLog:
2019-12-17 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-12-16 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/92950
* config/s390/vector.md ("mov<mode>" for V_8): Replace lh, lhy,
and lhrl with llc.
gcc/testsuite/ChangeLog:
2019-12-17 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-12-16 Andreas Krebbel <krebbel@linux.ibm.com>
PR target/92950
* gcc.target/s390/vector/pr92950.c: New test.
From-SVN: r279453
build_new_1 already passes tf_no_cleanup to build_value_init, but in this
testcase we end up calling build_value_init by way of
build_special_member_call, so we need to pass it to that function as well.
* init.c (build_new_1): Also pass tf_no_cleanup to
build_special_member_call.
From-SVN: r279335
Another place we need to look through the VIEW_CONVERT_EXPR we add to make a
use of a class NTTP have const type.
* pt.c (deducible_expression): Look through VIEW_CONVERT_EXPR.
From-SVN: r279333
Here unify was getting confused by the VIEW_CONVERT_EXPR we add in
finish_id_expression_1 to make class NTTP const when they're used in an
expression.
Tested x86_64-pc-linux-gnu, applying to trunk.
* pt.c (unify): Handle VIEW_CONVERT_EXPR.
From-SVN: r279332
Backport from mainline
2019-11-25 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/91786
* include/bits/fs_path.h (filesystem_error): Move definition before
the use in u8path.
From-SVN: r279223
* include/pstl/glue_numeric_defs.h: Restore enable_if lost during original
import of pstl.
* include/pstl/glue_numeric_impl.h: Likewise.
From-SVN: r279213
As PR91790 exposed, when we have one slp node whose first_stmt_info_for_drptr
is different from first_stmt_info, it's possible that the first_stmt DR isn't
initialized yet before stmt SLP_TREE_SCALAR_STMTS[0] of slp node. So we
shouldn't use first_stmt_info for vect_setup_realignment, instead we can use
the one based on first_stmt_info_for_drptr DR with additional adjustment by
bumping the distance from first_stmt DR.
2019-12-10 Kewen Lin <linkw@gcc.gnu.org>
Backport from mainline
2019-11-27 Kewen Lin <linkw@gcc.gnu.org>
PR tree-optimization/91790
* gcc/tree-vect-stmts.c (vectorizable_load): Use the adjusted DR for
vect_setup_realignment when first_stmt_info is different from
first_stmt_info_for_drptr.
From-SVN: r279166
* tree.c (build_array_type_1): Add SET_CANONICAL parameter and compute
TYPE_CANONICAL from the element type only if it is true. Remove a few
obsolete lines and adjust recursive call.
(fld_process_array_type): Adjust call to build_array_type_1.
(build_array_type): Likewise.
(build_nonshared_array_type): Likewise.
From-SVN: r279134
When concatenating a path ending in a root-directory onto another path,
we added an empty filename to the end of the path twice, but only
reserved space for one. That meant the second write went past the end of
the allocated buffer.
PR libstdc++/92853
* src/c++17/fs_path.cc (filesystem::path::operator+=(const path&)):
Do not process a trailing directory separator twice.
* testsuite/27_io/filesystem/path/concat/92853.cc: New test.
* testsuite/27_io/filesystem/path/concat/path.cc: Test more cases.
* testsuite/27_io/filesystem/path/concat/strings.cc: Test more cases.
From-SVN: r279115
2019-12-02 Sandra Loosemore <sandra@codesourcery.com>
Fix bugs relating to flexibly-sized objects in nios2 backend.
PR target/92499
gcc/c/
* c-decl.c (flexible_array_type_p): Move to common code.
gcc/
* config/nios2/nios2.c (nios2_in_small_data_p): Do not consider
objects of flexible types to be small if they have internal linkage
or are declared extern.
* config/nios2/nios2.h (ASM_OUTPUT_ALIGNED_LOCAL): Replace with...
(ASM_OUTPUT_ALIGNED_DECL_LOCAL): ...this. Use targetm.in_small_data_p
instead of the size of the object initializer.
* tree.c (flexible_array_type_p): Move from C front end, and
generalize to handle fields in non-C structures.
* tree.h (flexible_array_type_p): Declare.
gcc/testsuite/
* gcc.target/nios2/pr92499-1.c: New.
* gcc.target/nios2/pr92499-2.c: New.
* gcc.target/nios2/pr92499-3.c: New.
From-SVN: r278919
As PR92132 added vec_cmp_* and vcond_mask_* supports on trunk. This is a
partial backport of vec_{cmp,cmpu}<mode><mode> interface and related expand
to gcc-9-branch to fix PR92098.
gcc/ChangeLog
2019-12-02 Li Jia He <helijia@linux.ibm.com>
Partial backport from mainline
PR target/92098
2019-11-08 Kewen Lin <linkw@gcc.gnu.org>
PR target/92132
* config/rs6000/predicates.md
(signed_or_equality_comparison_operator): New predicate.
(unsigned_or_equality_comparison_operator): Likewise.
* config/rs6000/rs6000.md (one_cmpl<mode>2): Remove expand.
(one_cmpl<mode>3_internal): Rename to one_cmpl<mode>2.
* config/rs6000/vector.md
(vcond_mask_<mode><mode> for VEC_I and VEC_I): New expand.
(vec_cmp<mode><mode> for VEC_I and VEC_I): Likewise.
(vec_cmpu<mode><mode> for VEC_I and VEC_I): Likewise.
gcc/testsuite/ChangeLog
2019-12-02 Li Jia He <helijia@linux.ibm.com>
Partial backport from trunk
PR target/92098
2019-11-08 Kewen Lin <linkw@gcc.gnu.org>
PR target/92132
* gcc.target/powerpc/pr92132-fp-1.c: New test.
* gcc.target/powerpc/pr92132-fp-2.c: New test.
From-SVN: r278892
Backport from trunk as an insurance policy.
2019-11-30 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91783
* gfortran.dg/dependency_56.f90: New test. Backport from trunk on
the off-chance that somebody backports something that will break
this test case.
From-SVN: r278874
2019-11-29 Harald Anlauf <anlauf@gmx.de>
Backport from mainline
PR fortran/92629
* simplify.c (convert_mpz_to_unsigned): Skip assert for argument
range when -fno-range-check is specified.
PR fortran/92629
* gfortran.dg/pr92629.f90: New testcase.
From-SVN: r278862
Backport from mainline
2019-11-29 Tobias Burnus <tobias@codesourcery.com>
PR ipa/84963
* gfortran.dg/goacc/pr84963.f90: Use dg-additional-options not
dg-options as otherwise -fopenacc is not used.
From-SVN: r278838
PR ada/92489
Backport from mainline
2019-07-01 Ed Schonberg <schonberg@adacore.com>
* exp_attr.adb (Expand_Attribute_Reference, case Invalid_Value):
Resolve result of call to Get_Simple_Init_Val, which may be a
conversion of a literal.
From-SVN: r278830
2019-11-27 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-10-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/92222
* tree-vect-slp.c (_slp_oprnd_info::first_pattern): Remove.
(_slp_oprnd_info::second_pattern): Likewise.
(_slp_oprnd_info::any_pattern): New.
(vect_create_oprnd_info): Adjust.
(vect_get_and_check_slp_defs): Compute whether any stmt is
in a pattern.
(vect_build_slp_tree_2): Avoid building up a node from scalars
if any of the operand defs, not just the first, is in a pattern.
* gcc.dg/torture/pr92222.c: New testcase.
From-SVN: r278763
2019-11-26 Jerry DeLisle <jvdelisle@gcc.ngu.org>
Backport from mainline
PR fortran/92100
io/transfer.c (data_transfer_init_worker): Use fbuf_reset
instead of fbuf_flush before the seek. Note that fbuf_reset
calls fbuf_flush and adjusts fbuf pointers.
gfortran.dg/streamio_18.f90: New test.
From-SVN: r278740
2019-11-25 Thomas Koenig <tkoenig@gcc.gnu.org>
Harald Anlauf <anlauf@gmx.de>
Backport from trunk
PR fortran/92569
* io/transfer.c (transfer_array_inner): If position is
at AFTER_ENDFILE in current unit, return from data loop.
2019-11-25 Thomas Koenig <tkoenig@gcc.gnu.org>
Harald Anlauf <anlauf@gmx.de>
Backport from trunk
PR fortran/92569
* gfortran.dg/eof_6.f90: New test.
Co-Authored-By: Harald Anlauf <anlauf@gmx.de>
From-SVN: r278702
PR ada/92362
* gcc-interface/trans.c (gnat_to_gnu) <N_Attribute_Definition_Clause>:
Use a temporary instead of clobbering the result with a freeze node.
From-SVN: r278676
Defaulting the copy constructor on its first declaration made it change
from user-provided (and non-trivial) to implicitly-defined (and
trivial). This caused an ABI incompatibility between GCC 8 and GCC 9,
where functions taking a deque iterator disagree on the argument passing
convention.
Backport from mainline
2019-10-29 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/92267
* include/bits/stl_deque.h (_Deque_iterator(const _Deque_iterator&)):
Do not define as defaulted.
* testsuite/23_containers/deque/types/92267.cc: New test.
From-SVN: r278614
PR tree-optimization/91355
* tree-ssa-sink.c (select_best_block): Use >= rather than >
for early_bb scaled count with best_bb count comparison.
* g++.dg/torture/pr91355.C: New test.
From-SVN: r278551
2019-11-21 Richard Biener <rguenther@suse.de>
Revert
2019-09-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/91790
* tree-vect-stmts.c (vectorizable_load): For BB vectorization
use the correct DR for setting up realignment.
From-SVN: r278545
Fix PR90796
PR middle-end/90796
* gimple-loop-jam.c (any_access_function_variant_p): New function.
(adjust_unroll_factor): Use it to constrain safety, new parameter.
(tree_loop_unroll_and_jam): Adjust call and profitable unroll factor.
testsuite/
Backport from mainline
PR middle-end/90796
* gcc.dg/unroll-and-jam.c: Disable loop-invariant motion and adjust.
PR middle-end/90796
* gcc.dg/unroll-and-jam.c: Add three invalid and one valid case.
From-SVN: r278512
My patch that added initial C2X support and associated command-line
options missed documenting -Wc11-c2x-compat although the other options
were properly documented. This patch adds the missing documentation.
Tested with "make info" and "make pdf".
* doc/invoke.texi (-Wc11-c2x-compat): Document.
From-SVN: r278511
PR c++/90767
* call.c (complain_about_no_candidates_for_method_call): If
conv->from is not a type, pass to complain_about_bad_argument
lvalue_type of conv->from.
* g++.dg/diagnostic/pr90767-1.C: New test.
* g++.dg/diagnostic/pr90767-2.C: New test.
From-SVN: r278492
PR middle-end/90840
* expmed.c (store_bit_field_1): Handle the case where op0 is not a MEM
and has a mode that doesn't have corresponding integral type.
* gcc.c-torture/compile/pr90840.c: New test.
From-SVN: r278491
PR target/90867
* config/i386/i386.c (ix86_valid_target_attribute_tree): Don't
clear opts->x_ix86_isa_flags{,2} here...
(ix86_valid_target_attribute_inner_p): ... but here when seeing
arch=. Also clear opts->x_ix86_isa_flags{,2}_explicit.
* gcc.target/i386/pr90867.c: New test.
From-SVN: r278490
PR c/90898
* tree-ssa-ccp.c (insert_clobber_before_stack_restore): Remove
assertion.
(insert_clobbers_for_var): Fix a typo in function comment.
* gcc.dg/pr90898.c: New test.
From-SVN: r278489
PR middle-end/91450
* internal-fn.c (expand_mul_overflow): For s1 * s2 -> ur, if one
operand is negative and one non-negative, compare the non-negative
one against 0 rather than comparing s1 & s2 against 0. Otherwise,
don't compare (s1 & s2) == 0, but compare separately both s1 == 0
and s2 == 0, unless one of them is known to be negative. Remove
tem2 variable, use tem where tem2 has been used before.
* gcc.c-torture/execute/pr91450-1.c: New test.
* gcc.c-torture/execute/pr91450-2.c: New test.
From-SVN: r278438
Backport from trunk
2019-11-12 Segher Boessenkool <segher@kernel.crashing.org>
* config/rs6000/rs6000.md (rs6000_set_fpscr_drn): Use ULL on big
hexadecimal literal.
From-SVN: r278420
try_forward_edges does not update dominance info, and merge_blocks
relies on it being up-to-date. In PR92430 stale dominance info makes
merge_blocks produce a loop in the dominator tree, which in turn makes
delete_basic_block loop forever.
Fix by freeing dominance info at the beginning of cleanup_cfg.
Also, since the whole point of this pass is to perform jump threading
(other cleanups are not valuable at this point), skip it completely when
flag_thread_jumps is not set.
gcc/ChangeLog:
2019-11-15 Ilya Leoshkevich <iii@linux.ibm.com>
Backport from mainline
PR rtl-optimization/92430
* cfgcleanup.c (pass_jump_after_combine::gate): New function.
(pass_jump_after_combine::execute): Free
dominance info at the beginning.
gcc/testsuite/ChangeLog:
2019-11-15 Ilya Leoshkevich <iii@linux.ibm.com>
Backport from mainline
PR rtl-optimization/92430
* gcc.dg/pr92430.c: New test (from Arseny Solokha).
From-SVN: r278291
2019-11-14 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-11-14 Martin Liska <mliska@suse.cz>
PR target/92389
* config/i386/i386.h: Add PTA_AVX512VPOPCNTDQ to
PTA_ICELAKE_CLIENT which is later interited by
PTA_ICELAKE_SERVER and PTA_TIGERLAKE.
From-SVN: r278214
This was dormant for quite some time, but it started happening for me
on gcc.c-torture/compile/pr65153.c sometime after r276645 for -mabi=32 linux runs.
The pattern accepts any SMALL_OPERAND constant value while it asserts during the final
that the value is in the mode size range. I this case it happens that combine_and_move_insns
during ira makes a pattern with negative "shift count" which fails at final stage.
This simple fix just truncates the constant operand to mode size the same as shift patterns.
gcc/ChangeLog:
2019-11-13 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Backport from mainline
* config/mips/mips.md (rotr<mode>3): Sanitize the constant argument
instead of asserting its value.
From-SVN: r278154
* c-ada-spec.c (get_underlying_decl): Do not look through typedefs.
(dump_forward_type): Do not generate a declaration for function types.
(dump_nested_type) <ARRAY_TYPE>: Do not generate a nested declaration
of the component type if it is declared in another file.
From-SVN: r278130
2019-11-11 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-06-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/90930
* tree-ssa-reassoc.c (reassociate_bb): Only rewrite expression
into parallel form in the last pass instance.
* gcc.dg/tree-ssa/reassoc-24.c: Adjust.
* gcc.dg/tree-ssa/reassoc-25.c: Likewise.
From-SVN: r278059
On x86, since -fPIC and -shared should be used to create offload image,
we put them the last to properly create offload image.
2019-11-11 H.J. Lu <hjl.tools@gmail.com>
PR target/87833
* config/i386/intelmic-mkoffload.c (prepare_target_image): Put
-fPIC and -shared the last to create offload image.
Backport from trunk r278041.
From-SVN: r278042
The 'gcc/configure' script sources all 'gcc/*/config-lang.in' files, but fails
to emit such dependency information into the build machinery. That means,
currently, when something gets changed in a 'gcc/*/config-lang.in' file, this
is not noticed, and doesn't propagate through the build machinery.
Handling of configure fragments is modelled in the same way as it already
exists for Makefile fragments.
gcc/
* Makefile.in (LANG_CONFIGUREFRAGS): Define.
(config.status): Use/depend on it.
* configure.ac (all_lang_configurefrags): Track, 'AC_SUBST'.
* configure: Regenerate.
Backport from trunk r278035.
From-SVN: r278036
2019-11-10 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/92113
* trans-decl.c (gfc_get_symbol_decl): If __def_init actually
contains a value, put it into the read-only section.
From-SVN: r278015
2019-11-10 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/92321
* frontend-passes.c (call_external_blas): Commit symbol for
external BLAS routine.
2019-11-10 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/92321
* gfortran.dg/matmul_blas_2.f90: New test.
From-SVN: r278014
Backport from mainline
2019-11-07 John David Anglin <danglin@gcc.gnu.org>
* config/pa/pa.md (memory_barrier): Revise to use ldcw barriers.
Enhance comment.
(memory_barrier_coherent, memory_barrier_64, memory_barrier_32): New
insn patterns using ldcw instruction.
(memory_barrier): Remove insn pattern using sync instruction.
* config/pa/pa.opt (coherent-ldcw): New option.
(ordered): New option.
From-SVN: r278001
PR c++/92384
* function.c (assign_parm_setup_block, assign_parm_setup_stack): Don't
copy TYPE_EMPTY_P arguments from data->entry_parm to data->stack_parm
slot.
(assign_parms): For TREE_ADDRESSABLE parms with TYPE_EMPTY_P type
force creation of a unique data.stack_parm slot.
* g++.dg/torture/pr92384.C: New test.
From-SVN: r277989
Backported from mainline
2019-11-05 Jakub Jelinek <jakub@redhat.com>
PR c++/92343
* constexpr.c (potential_constant_expression_1): Return true rather
than false for PREDICT_EXPR.
* g++.dg/cpp2a/attr-likely6.C: New test.
From-SVN: r277988
Backported from mainline
2019-10-31 Jakub Jelinek <jakub@redhat.com>
PR preprocessor/92296
* internal.h (struct def_pragma_macro): Add is_builtin bitfield.
(_cpp_restore_special_builtin): Declare.
* init.c (_cpp_restore_special_builtin): New function.
* directives.c (do_pragma_push_macro): For NT_BUILTIN_MACRO
set is_builtin and don't try to grab definition.
(cpp_pop_definition): Use _cpp_restore_special_builtin to restore
builtin macros.
* c-c++-common/cpp/pr92296-1.c: New test.
* c-c++-common/cpp/pr92296-2.c: New test.
From-SVN: r277987
Backported from mainline
2019-10-31 Jakub Jelinek <jakub@redhat.com>
PR middle-end/92231
* tree.h (fndecl_built_in_p): Use fndecl_built_in_p instead of
DECL_BUILT_IN in comment. Remove redundant ()s around return
argument.
* tree.c (free_lang_data_in_decl): Check if var is FUNCTION_DECL
before calling fndecl_built_in_p.
* gimple-fold.c (gimple_fold_stmt_to_constant_1): Check if
TREE_OPERAND (fn, 0) is a FUNCTION_DECL before calling
fndecl_built_in_p on it.
* lto-lang.c (handle_const_attribute): Don't call fndecl_built_in_p
on *node that is not FUNCTION_DECL.
* gcc.c-torture/compile/pr92231.c: New test.
From-SVN: r277986
Backported from mainline
2019-10-29 Jakub Jelinek <jakub@redhat.com>
* doc/install.texi (--enable-offload-targets): Fix up a typo in the
example, use actual names of supported offload targets.
From-SVN: r277984
Backported from mainline
2019-10-22 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/85887
* decl.c (expand_static_init): Drop ECF_LEAF from __cxa_guard_acquire
and __cxa_guard_release.
From-SVN: r277982
Backported from mainline
2019-10-21 Jakub Jelinek <jakub@redhat.com>
PR c++/92015
* constexpr.c (cxx_eval_component_reference, cxx_eval_bit_field_ref):
Use STRIP_ANY_LOCATION_WRAPPER on CONSTRUCTOR elts.
* g++.dg/cpp0x/constexpr-92015.C: New test.
From-SVN: r277980
PR target/92095
* config/sparc/sparc-protos.h (output_load_pcrel_sym): Declare.
* config/sparc/sparc.c (sparc_cannot_force_const_mem): Revert latest
change.
(got_helper_needed): New static variable.
(output_load_pcrel_sym): New function.
(get_pc_thunk_name): Remove after inlining...
(load_got_register): ...here. Rework the initialization of the GOT
register and of the GOT helper.
(save_local_or_in_reg_p): Test the REGNO of the GOT register.
(sparc_file_end): Test got_helper_needed to decide whether the GOT
helper must be emitted. Use output_asm_insn instead of fprintf.
(sparc_init_pic_reg): In PIC mode, always initialize the PIC register
if optimization is enabled.
* config/sparc/sparc.md (load_pcrel_sym<P:mode>): Emit the assembly
by calling output_load_pcrel_sym.
From-SVN: r277967
The new sigfpe-eh.c fails with
internal compiler error: RTL check: expected elt 0 type 'e' or 'u', have 'w' (rtx const_int)
This is most likely due to a typo: XEXP (*op1, 0) was used, when
XEXP (*op0, 1) was intended. This did not cause any user-visible
problems, because reversed_comparison_code_parts ignores the
respective argument, and the release compiler is built without RTL
checks.
gcc/ChangeLog:
2019-11-06 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390.c (s390_canonicalize_comparison): Use XEXP
(*op0, 1) instead of XEXP (*op1, 0).
gcc/testsuite/ChangeLog:
2019-11-06 Ilya Leoshkevich <iii@linux.ibm.com>
* gcc.target/s390/sigfpe-eh.c: New test.
From-SVN: r277874
Backport from trunk
2019-10-26 Segher Boessenkool <segher@kernel.crashing.org>
PR target/91289
* config/rs6000/rs6000.c (rs6000_emit_allocate_stack): Don't add an
immediate to r0; use r11 instead. Save and restore r11 to r0 around
this.
From-SVN: r277855
These tests check if loop peeling has been applied to avoid
having to vectorize unaligned loops. On Z we do not have any
alignment requirements for vectorization so we also don't need want
the loop peeling here.
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.dg/tree-ssa/gen-vect-26.c: Disable loop peeling check for
IBM Z.
* gcc.dg/tree-ssa/gen-vect-28.c: Likewise.
From-SVN: r277844
In the Z backend we still set min-vect-loop-bound to 2 to work around
corner cases where awkward epilogue code gets generated in the
vectorizer. This has a particular bad impact when vectorizing loops
with a low iteration count. Due to this we do not vectorize the loop
in gen-vect-11/32 - what actually is a pity.
The patch sets min-vect-loop-bound back to the default value of 0 in
order to enable vectorization.
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.dg/tree-ssa/gen-vect-11.c: Add --param min-vect-loop-bound=0
for IBM Z.
* gcc.dg/tree-ssa/gen-vect-11.c: Likewise.
From-SVN: r277843
This fixes various issues with the useable_hw check in s390.exp. The
check is supposed to verify whether a testcase can be run on the
current hardware.
- the test never returned true for -m31 because vzero is not available
in ESA mode and -m31 defaults to -mesa
- the missing v0 clobber on the vzero instruction made the check fail
if the stack pointer got saved in f0
- the lcbb instruction used for checking whether we are on a z13
also requires vx. Replace it with an instruction from the generic
instruction set extensions.
- no support for z14 and z15 so far
gcc/testsuite/ChangeLog:
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.target/s390/s390.exp
(check_effective_target_s390_useable_hw): Add inline asm for z14
and z15. Replace instruction for z13 with lochiz. Add register
clobbers. Check also for __zarch__ when doing the __VX__ test.
From-SVN: r277842
This fixes an ICE in gcc.dg/attr-vector_size.c testcase.
gcc/ChangeLog:
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-11-05 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/s390.c (s390_vector_alignment): Check if the value
fits into uhwi before using it.
From-SVN: r277841
Fixed to work for x86 as well as powerpc (use the final assembler output
instead of the jump rtl which varies between X86 and PPC). Amended the
options to reflect this change.
gcc/testsuite/
Backport from mainline.
2019-06-20 Iain Sandoe <iain@sandoe.co.uk>
* obj-c++.dg/stubify-1.mm: Adjust options and scan-asm checks.
* obj-c++.dg/stubify-2.mm: Likewise.
* objc.dg/stubify-1.m: Likewise.
* objc.dg/stubify-2.m: Likewise.
From-SVN: r277800
This backports two patches that fix failure of Wnonnull test on some targets.
277280 To avoid the result of this test depending on the implementation of
the system 'string.h', provide prototypes for the two functions used
in the test. This generalises the fix from 277202.
277202 was the initial fix for Wnonnull on Darwin.
gcc/testsuite/
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-10-22 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/Wnonnull.c: Provide prototypes for strlen and memcpy.
Use __SIZE_TYPE__ instead of size_t.
Backport from mainline.
2019-10-19 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/Wnonnull.c: Add attributed function declarations for
memcpy and strlen for Darwin.
From-SVN: r277647
This is part of making our codegen match what the system tools produce.
We applied a conservative, but fairly large, hammer to fix 71767.
However, ideally, we want minimise the number of symbols visible to
ld64 and to match the cases emitted by clang (since that's what ld64
is expecting). Now we've improved the handling of indirections, we
can make the indirection symbols local when they are in the regular
non-lazy symbol pointers section. We will continue to make any
indirections in the data section visible (since right now we have no
way to track if a given symbol follows a weak global).
This change makes no difference to handling of labels for constants
(to be revised in a future patch).
There's a mechanical change to a number of tests (allowing 'l' or 'L'
as the indirection symbol prefix).
gcc/
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-13 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_indirection_name): Rework the
function to emit linker-visible symbols only for indirections
in the data section. Clean up the code and update comments.
gcc/testsuite/
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-10-13 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/indirect-thunk-1.c: Allow 'l' or 'L' in
indirection label prefix, for Darwin.
* gcc.target/i386/indirect-thunk-2.c: Likewise.
* gcc.target/i386/indirect-thunk-3.c: Likewise.
* gcc.target/i386/indirect-thunk-4.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-1.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-2.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-3.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-4.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-5.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-6.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-1.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-2.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-3.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-4.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-1.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-2.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-3.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-4.c: Likewise.
* gcc.target/i386/pr32219-2.c: Likewise.
* gcc.target/i386/pr32219-3.c: Likewise.
* gcc.target/i386/pr32219-4.c: Likewise.
* gcc.target/i386/pr32219-7.c: Likewise.
* gcc.target/i386/pr32219-8.c: Likewise.
* gcc.target/i386/ret-thunk-14.c: Likewise.
* gcc.target/i386/ret-thunk-15.c: Likewise.
* gcc.target/i386/ret-thunk-9.c: Likewise.
From-SVN: r277646
This fixes build errors when used with newer GCC and corrects a mistake
in the checking of ABI versions.
276768 We were missing a check for the case that user's ABI was > 2 and the
codegen was for 64 bit.
276635 Fix some format-related build warnings.
This fixes two error messages to avoid punctuation and contracted
negations.
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-09 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_override_options): Make the check for
Objective-C ABI version more specific for 64bit code.
Backport from mainline
2019-10-06 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_override_options): Adjust objective-c
ABI version error messages to avoid punctuation and contracted
negations.
From-SVN: r277645
This is part 3 of build fixes for older Darwin versions (and will also
fix testsuite complaints about linkage with objects that are built for
an newer OS version than is being built, when used with a modern linker).
The library handling and some of the options for creating the crts for
the older PPC Darwin versions had bit-rotted somewhat. This adjusts the
build criteria for the crts to avoid newer ld64 versions warnings about
mismatches in build and object versions.
Added to some of the comments that it is documented why the specs are as
they are.
gcc/
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
(STARTFILE_SPEC): Split crt3 into a separate spec.
(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
(DARWIN_CRT2_SPEC): New.
(DARWIN_CRT3_SPEC): New.
(MIN_LD64_OMIT_STUBS): Revise to 62.1.
* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
(DARWIN_CRT3_SPEC): New.
libgcc/
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config.host (powerpc-*-darwin*,powerpc64-*-darwin*): Revise crt
list.
* config/rs6000/t-darwin: Build crt3_2 for older systems. Revise
mmacosx-version-min for crts to run across all system versions.
* config/rs6000/t-darwin64 (LIB2ADD): Remove.
* config/t-darwin: Revise mmacosx-version-min for crts to run across
system versions >= 10.4.
From-SVN: r277644
Part 2 of fixes to build and link conditions for older Darwin versions.
We have been including these endfiles in libgcc, which means that we have to
append -lgcc even when using shared libgcc. In preparation for revision of
libgcc split this into an endfile. Build the new version.
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config.host: Add libef_ppc.a to the extra files for powerpc-darwin.
* config/rs6000/t-darwin: (PPC_ENDFILE_SRC, PPC_ENDFILE_OBJS): New.
Build objects for the out of line save/restore register functions
so that they can be used for any supported Darwin version.
* config/t-darwin: Default the build Darwin version to Darwin8
(MacOS 10.4).
From-SVN: r277642
Part 1 of fixes to build and link conditions for older Darwin versions.
We have been including these endfiles in libgcc, which means that we have to
append -lgcc even when using shared libgcc. In preparation for revision of
libgcc split this into an endfile.
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-27 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): Correct whitespace in the
spec.
Backport from mainline
2019-06-25 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ENDFILE_SPEC): New.
From-SVN: r277641
For very old toolchains, the compiler generated extra symbols that mark the
start of each FDE. We no longer need this (since xcode 3 era) - so, for
compatibility with newer linkers, omit this when it is not required.
Since we have detection of the linker version, we can use that directly to
determine if support is needed.
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-18 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_emit_unwind_label): New default to false.
(darwin_override_options): Set darwin_emit_unwind_label as needed.
From-SVN: r277640
This is a combination of two patches that prevents a bootstrap fail when
a modern assembler/linker pair are used that don't support the JBSR reloc
(but don't require it for long calls).
272356 The need for picsym stubs is dependent on linker used, not OS rev.
For very old toolchains, the compiler generated pic symbol stubs that
provide the necessary indirections. We no longer need this (since xcode
3 era) and it's more efficient for the linker to make one stub when it
knows a symbol is needed that for us to emit them speculatively in every
object.
Our current codegen is making the assumption that a specific OS version
uses a specific linker version - and therefore the presence of support
could be based on the target OS rev. Of course, that's way too simplistic
(most likely bogus for cross-toolchains) and we want to make things explict.
Since we have detection of the linker version, we can use that directly
(A config test for support for stub-less linking might also be feasible
but much more involved).
Finally, should the user wish to generate code that caters for export to
use in an environment with an older toolchain, the generation of stubs
can be forced from the command line.
In addition to the points above, branch islanding and a long branch opt
for PowerPC Darwin has become conflated with the emission of these stubs
(which is confusing, and will be rectified in a following patch).
274397 There is no need to distinguish PIC/non-PIC symbol stubs.
So we can use a single flag for both.
2019-10-30 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-08-13 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_indirect_call_target): Rename symbol stub
flag.
(darwin_override_options): Likewise.
* config/darwin.h: Likewise.
* config/darwin.opt: Likewise.
* config/i386/i386.c (output_pic_addr_const): Likewise.
* config/rs6000/darwin.h: Likewise.
* config/rs6000/rs6000.c (rs6000_call_darwin_1): Likewise.
* config/i386/darwin.h (TARGET_MACHO_PICSYM_STUBS): Rename to ...
... this TARGET_MACHO_SYMBOL_STUBS.
(FUNCTION_PROFILER):Likewise.
* config/i386/i386.h: Likewise.
Backport from mainline
2019-06-16 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_indirect_call_target): Use renamed
darwin_picsymbol_stubs to decide on output.
(darwin_override_options): Handle darwin_picsymbol_stubs.
* config/darwin.h (MIN_LD64_OMIT_STUBS): New.
(LD64_VERSION): Revise default.
* config/darwin.opt: (mpic-symbol-stubs): New option.
(darwin_picsymbol_stubs): New variable.
* config/i386/darwin.h (TARGET_MACHO_BRANCH_ISLANDS):
rename to TARGET_MACHO_PICSYM_STUBS.
* config/i386/i386.c (output_pic_addr_const): Likewise.
* config/i386/i386.h Likewise.
* config/rs6000/darwin.h: Likewise.
* config/rs6000/rs6000.c (rs6000_call_darwin_1): Use renamed
darwin_picsymbol_stubs.
From-SVN: r277638
gcc/ChangeLog:
2019-10-30 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Backport from mainline
2019-07-09 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* cfgcleanup.c (old_insns_match_p): Check if used hard regs set is equal
for both call instructions.
gcc/testsuite/ChangeLog:
2019-10-30 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Backport from mainline
2019-07-09 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
* gcc.target/mips/cfgcleanup-jalr1.c: New test.
* gcc.target/mips/cfgcleanup-jalr2.c: New test.
* gcc.target/mips/cfgcleanup-jalr3.c: New test.
From-SVN: r277625
Testing libphobos fails for multi-lib configs:
$ make check-target-libphobos RUNTESTFLAGS="--target_board=unix\{-m32,\}"
fails for every 32bit execution, because the host libgcc_s.so is used which
is not the correct version:
spawn [open ...]
./test_aa.exe: /lib/i386-linux-gnu/libgcc_s.so.1: version `GCC_7.0.0' not found (required by ./test_aa.exe)
FAIL: libphobos.aa/test_aa.d execution test
This can be fixed by adding a few lines from libstdc++/testsuite/lib/libstdc++.exp
to libphobos/testsuite/lib/libphobos.exp
Backport trunk r275332:
libphobos/
2019-09-03 Bernd Edlinger <bernd.edlinger@hotmail.de>
* testsuite/lib/libphobos.exp (libphobos_init): Add multi-lib libgcc
dirs to the ld_library_path var.
From-SVN: r277611
With '--enable-checking=yes,extra,rtl':
In file included from [...]/source-gcc/gcc/coretypes.h:433,
from [...]/source-gcc/gcc/dwarf2out.c:60:
[...]/source-gcc/gcc/machmode.h: In function 'dw_loc_descr_node* mem_loc_descriptor(rtx, machine_mode, machine_mode, var_init_status)':
[...]/source-gcc/gcc/machmode.h:520:42: error: 'int_mode' may be used uninitialized in this function [-Werror=maybe-uninitialized]
520 | ? mode_size_inline (mode) : mode_size[mode]);
| ^~~~
[...]/source-gcc/gcc/dwarf2out.c:15464:19: note: 'int_mode' was declared here
15464 | scalar_int_mode int_mode, inner_mode, op1_mode;
| ^~~~~~~~
cc1plus: all warnings being treated as errors
make[3]: *** [dwarf2out.o] Error 1
Backport trunk r270903.
2019-05-06 Richard Biener <rguenther@suse.de>
* dwarf2out.c (mem_loc_descriptor): Initialize int_mode.
From-SVN: r277608
PR c++/92201
* cp-gimplify.c (cp_gimplify_expr): If gimplify_to_rvalue changes the
function pointer type, re-add cast to the original one.
* g++.dg/other/pr92201.C: New test.
From-SVN: r277594
2019-10-28 Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/91926
* trans-expr.c (gfc_conv_gfc_desc_to_cfi_desc): Correct the
assignment of the attribute field to account correctly for an
assumed shape dummy. Assign separately to the gfc and cfi
descriptors since the atribute can be different. Add branch to
correctly handle missing optional dummies.
2019-10-28 Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/91926
* gfortran.dg/ISO_Fortran_binding_13.f90 : New test.
* gfortran.dg/ISO_Fortran_binding_13.c : Additional source.
* gfortran.dg/ISO_Fortran_binding_14.f90 : New test.
From-SVN: r277531
r266734 has introduced a new instance of jump threading pass in order to
take advantage of opportunities that combine opens up. It was perceived
back then that it was beneficial to delay it after reload, since that
might produce even more such opportunities.
Unfortunately jump threading interferes with hot/cold partitioning. In
the code from PR92007, it converts the following
+-------------------------- 2/HOT ------------------------+
| |
v v
3/HOT --> 5/HOT --> 8/HOT --> 11/COLD --> 6/HOT --EH--> 16/HOT
| ^
| |
+-------------------------------+
into the following:
+---------------------- 2/HOT ------------------+
| |
v v
3/HOT --> 8/HOT --> 11/COLD --> 6/COLD --EH--> 16/HOT
This makes hot bb 6 dominated by cold bb 11, and because of this
fixup_partitions makes bb 6 cold as well, which in turn makes EH edge
6->16 a crossing one. Not only can't we have crossing EH edges, we are
also not allowed to introduce new crossing edges after reload in
general, since it might require extra registers on some targets.
Therefore, move the jump threading pass between combine and hot/cold
partitioning. Building SPEC 2006 and SPEC 2017 with the old and the new
code indicates that:
* When doing jump threading right after reload, 3889 edges are threaded.
* When doing jump threading right after combine, 3918 edges are
threaded.
This means this change will not introduce performance regressions.
gcc/ChangeLog:
2019-10-28 Ilya Leoshkevich <iii@linux.ibm.com>
Backport from mainline
PR rtl-optimization/92007
* cfgcleanup.c (thread_jump): Add an assertion that we don't
call it after reload if hot/cold partitioning has been done.
(class pass_postreload_jump): Rename to
pass_jump_after_combine.
(make_pass_postreload_jump): Rename to
make_pass_jump_after_combine.
* passes.def(pass_postreload_jump): Move before reload, rename
to pass_jump_after_combine.
* tree-pass.h (make_pass_postreload_jump): Rename to
make_pass_jump_after_combine.
gcc/testsuite/ChangeLog:
2019-10-28 Ilya Leoshkevich <iii@linux.ibm.com>
Backport from mainline
PR rtl-optimization/92007
* g++.dg/opt/pr92007.C: New test (from Arseny Solokha).
From-SVN: r277515
In PR70010, a function is marked with target(no-vsx) to disable VSX code
generation. To avoid VSX code generation, this function should not be
inlined into VSX function. To fix the bug, in the current logic when
checking whether the caller's ISA flags supports the callee's ISA flags, we
just need to add a test that enforces that the caller's ISA flags match
exactly the callee's flags, for those flags that were explicitly set in the
callee. If caller without target attribute then using options from command
line.
Jiufu
BR
gcc/
2019-10-16 Peter Bergner <bergner@linux.ibm.com>
Jiufu Guo <guojiufu@linux.ibm.com>
PR target/70010
* config/rs6000/rs6000.c (rs6000_can_inline_p): Prohibit inlining if
the callee explicitly disables some isa_flags the caller is using.
gcc.testsuite/
2019-10-16 Peter Bergner <bergner@linux.ibm.com>
Jiufu Guo <guojiufu@linux.ibm.com>
PR target/70010
* gcc.target/powerpc/pr70010.c: New test.
* gcc.target/powerpc/pr70010-1.c: New test.
* gcc.target/powerpc/pr70010-2.c: New test.
* gcc.target/powerpc/pr70010-3.c: New test.
* gcc.target/powerpc/pr70010-4.c: New test.
Co-Authored-By: Jiufu Guo <guojiufu@linux.ibm.com>
From-SVN: r277506
The current Darwin load/store lo_sum patterns have neither predicate nor
constraint. This means that most parts of the backend, which rely on
recog() to validate the rtx, can produce invalid combinations/selections.
For 32bit cases this isn't a problem since we can load/store to unaligned
addresses using D-mode insns.
Conversely, for 64bit instructions that use DS mode, this can manifest as
assemble errors (for an assembler that checks the LO14 relocations), or as
crashes caused by wrong offsets (or worse, wrong content for the two LSBs).
What we want to check for Y on Darwin is:
- that the alignment of the Symbols' target is sufficient for DS mode
- that the offset is suitable for DS mode.
(while looking through the Mach-O PIC unspecs).
So, the patch removes the Darwin-specific lo_sum patterns (we begin using
the movdi_internal64 patterns). We also we need to extend the handling of the
mem_operand_gpr constraint to allow looking through Mach-O PIC UNSPECs in
the lo_sum cases.
2019-10-27 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-17 Iain Sandoe <iain@sandoe.co.uk>
PR target/65342
* config/rs6000/darwin.md (movdi_low, movsi_low_st): Delete.
(movdi_low_st): Delete.
* config/rs6000/rs6000.c
(darwin_rs6000_legitimate_lo_sum_const_p): New.
(mem_operand_gpr): Validate Mach-O LO_SUM cases separately.
* config/rs6000/rs6000.md (movsi_low): Delete.
From-SVN: r277495
When we're using the LLVM-based assembler (the default on modern Darwin)
the ordering of stubs and non-lazy symbol pointers is important.
Interleaving the output (current GCC behaviour) leads to crashes which
prevents us from building code with symbol stubs.
To resolve this, we order the output of stubs and symbol indirections:
1. Any indirections in the data section
2. Symbol stubs.
3. Non-lazy symbol pointers.
At present, we still emit LTO sections after these.
2019-10-27 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-12 Iain Sandoe <iain@sandoe.co.uk>
PR target/67183
* config/darwin.c (machopic_indirection): New field to flag
non-lazy-symbol-pointers in the data section.
(machopic_indirection_name): Compute if an indirection should
appear in the data section.
(machopic_output_data_section_indirection): New callback split
from machopic_output_indirection.
(machopic_output_stub_indirection): Likewise.
(machopic_output_indirection): Retain the code for non-lazy
symbol pointers in their regular section.
(machopic_finish): Use the new callbacks to order the indirection
output.
From-SVN: r277494
This is a combined set of 5 patches that allows us to fix
PR 65342 and 67183.
276924 Make machopic_finish() static.
276767 Set a SYMBOL flag for indirections.
We are able to treat these specially where needed in legitimate address
tests (specifically, they are guaranteed to be pointer-aligned).
276708 Compute and cache indirection rules.
This caches a check for the requirement to indirect a symbol in the Darwin
ABI, and uses it where needed. We also ensure that we place the indirection
pointers into the non-lazy symbol pointers section. Other placements have
occurred with various platform toolchains - but these seem to have been
unintentional so we match current platform toolchains.
276675 Consider visibility in indirections.
For weak, hidden vars the indirection should just be as normal, that
is that the indirections for such symbols should appear in the non-lazy
symbol pointers table, not in the .data section.
276674 Initial tidy of Mach-O symbol handling.
We want to improve the detection and caching of symbol-properties
so that (a) we can make the compiler's output match the platform
norms (b) we can improve efficiency by checking flags instead of
inspecting strings. (c) The fix for PR71767 was a largish hammer
and we want to reduce the number of symbols that are made linker-
visible.
This first patch is largely typographical changes with no functional
difference intended:
- Tries to ensure that there's no overlap between the symbols used in
the Mach-O case and those declared in the i386 or rs6000 port trees.
- Some improvement to comments.
- Makes the naming of the symbol flags consistent with other uses.
- Provides a predicate macro for each use.
2019-10-27 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-12 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-protos.h (machopic_finish): Delete.
* config/darwin.c (machopic_finish): Make static.
Backport from mainline
2019-10-09 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_indirect_data_reference): Set flag to
indicate that the new symbol is an indirection.
(machopic_indirect_call_target): Likewise.
* config/darwin.h (MACHO_SYMBOL_FLAG_INDIRECTION): New.
(MACHO_SYMBOL_INDIRECTION_P): New.
(MACHO_SYMBOL_FLAG_STATIC): Adjust bit number.
Backport from mainline
2019-10-08 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_indirect_data_reference): Check for
required indirections before making direct access to defined
values.
(machopic_output_indirection): Place the indirected pointes for
required indirections into the non-lazy symbol pointers section.
(darwin_encode_section_info):
* config/darwin.h (MACHO_SYMBOL_FLAG_MUST_INDIRECT): New.
(MACHO_SYMBOL_MUST_INDIRECT_P): New.
Backport from mainline
2019-10-07 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_output_indirection): Don't put
hidden symbol indirections into the .data section, use the
non-lazy symbol pointers section as normal.
(darwin_encode_section_info): Record if a symbol is hidden.
* config/darwin.h (MACHO_SYMBOL_FLAG_HIDDEN_VIS): New.
(MACHO_SYMBOL_HIDDEN_VIS_P): New.
Backport from mainline
2019-10-07 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_symbol_defined_p): Use symbol flag
predicates instead of accessing bits directly.
(machopic_indirect_call_target): Likewise.
(machopic_output_indirection): Likewise.
(darwin_encode_section_info): Improve description. Use renamed
symbol flags. Use predicate macros for variables and functions.
* config/darwin.h:
Rename MACHO_SYMBOL_VARIABLE to MACHO_SYMBOL_FLAG_VARIABLE.
Rename MACHO_SYMBOL_DEFINED to MACHO_SYMBOL_FLAG_DEFINED.
Rename MACHO_SYMBOL_STATIC to MACHO_SYMBOL_FLAG_STATIC.
(MACHO_SYMBOL_VARIABLE_P): New.
(MACHO_SYMBOL_DEFINED_P):New.
(MACHO_SYMBOL_STATIC_P): New.
* config/i386/darwin.h (MACHO_SYMBOL_FLAG_VARIABLE): Delete.
(SYMBOL_FLAG_SUBT_DEP): New.
* config/rs6000/darwin.h (SYMBOL_FLAG_SUBT_DEP): New.
From-SVN: r277493
2019-10-27 Paul Thomas <pault@gcc.gnu.org>
Backport from mainline
PR fortran/86248
* resolve.c (flag_fn_result_spec): Correct a typo before the
function declaration.
* trans-decl.c (gfc_sym_identifier): Boost the length of 'name'
to allow for all variants. Simplify the code by using a pointer
to the symbol's proc_name and taking the return out of each of
the conditional branches. Allow symbols with fn_result_spec set
that do not come from a procedure namespace and have a module
name to go through the non-fn_result_spec branch.
2019-10-27 Paul Thomas <pault@gcc.gnu.org>
Backport from mainline
PR fortran/86248
* gfortran.dg/char_result_19.f90 : New test.
* gfortran.dg/char_result_mod_19.f90 : Module for the new test.
From-SVN: r277490
Backport from mainline
2019-10-11 Jan Hubicka <hubicka@ucw.cz>
* gimple-streamer-out.c (output_gimple_stmt): Add explicit function
parameter.
* lto-streamer-out.c: Include tree-dfa.h.
(output_cfg): Do not use cfun.
(lto_prepare_function_for_streaming): New.
(output_function): Do not push cfun; do not initialize loop optimizer.
* lto-streamer.h (lto_prepare_function_for_streaming): Declare.
* passes.c (ipa_write_summaries): Use it.
(ipa_write_optimization_summaries): Do not modify bodies.
* tree-dfa.c (renumber_gimple_stmt_uids): Add function parameter.
* tree.dfa.h (renumber_gimple_stmt_uids): Update prototype.
* tree-ssa-dse.c (pass_dse::execute): Update use of
renumber_gimple_stmt_uids.
* tree-ssa-math-opts.c (pass_optimize_widening_mul::execute): Likewise.
2019-10-12 Jan Hubicka <hubicka@ucw.cz>
* lto-streamer-out.c (collect_block_tree_leafs): Renumber statements
so non-virutal are before virutals.
(output_function): Avoid body modifications.
From-SVN: r277473
This patch fixes a problem with the thumb1 prologue code where the link
register could be unconditionally used as a scratch register even if the
return value was still live at the end of the prologue.
Additionally, the patch improves the code generated when we are not
using many low call-saved registers to make use of any unused call
clobbered registers to help with the saving of high registers that
cannot be pushed directly (quite rare in normal code as the register
allocator correctly prefers low registers).
2019-05-08 Mihail Ionescu <mihail.ionescu@arm.com>
Richard Earnshaw <rearnsha@arm.com>
gcc:
PR target/88167
* config/arm/arm.c (thumb1_prologue_unused_call_clobbered_lo_regs): New
function.
(thumb1_epilogue_unused_call_clobbered_lo_regs): New function.
(thumb1_compute_save_core_reg_mask): Don't force a spare work
register if both the epilogue and prologue can use call-clobbered
regs.
(thumb1_unexpanded_epilogue): Use
thumb1_epilogue_unused_call_clobbered_lo_regs. Reverse the logic for
picking temporaries for restoring high regs to match that of the
prologue where possible.
(thumb1_expand_prologue): Add any usable call-clobbered low registers to
the list of work registers. Detect if the return address is still live
at the end of the prologue and avoid using it for a work register if so.
If the return address is not live, add LR to the list of pushable regs
after the first pass.
gcc/testsuite:
PR target/88167
* gcc.target/arm/pr88167-1.c: New test.
* gcc.target/arm/pr88167-2.c: New test.
From-SVN: r277452
Backport from mainline
2019-10-18 Jakub Jelinek <jakub@redhat.com>
PR middle-end/92153
* ggc-page.c (release_pages): Read g->alloc_size before free rather
than after it.
2019-10-11 Jan Hubicka <hubicka@ucw.cz>
* ggc-page.c (release_pages): Output statistics when !quiet_flag.
(ggc_collect): Dump later to not interfere with release_page dump.
(ggc_trim): New function.
* ggc-none.c (ggc_trim): New.
* ggc.h (ggc_trim): Declare.
* lto-partition.c (add_symbol_to_partition_1): Update.
(undo_parittion): Update.
From-SVN: r277443
gcc/ChangeLog:
2019-10-24 Mihail Ionescu <mihail.ionescu@arm.com>
Backport from mainline
2019-10-18 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/arm/t-multilib: Add new multilib variants and new
mappings.
gcc/testsuite/ChangeLog:
2019-10-24 Mihail Ionescu <mihail.ionescu@arm.com>
Backport from mainline
2019-10-18 Andre Vieira <andre.simoesdiasvieira@arm.com>
* gcc.target/arm/multilib.exp: Add extra tests.
From-SVN: r277417
There are some cases in which the value for the max skip to a p2align
directive can be negative. The older assembler (and GAS) just ignores
these cases but newer tools produce an error. To preserve behaviour,
we avoid emitting out of range values.
gcc/ChangeLog:
2019-10-24 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-23 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Guard
against out of range max skip or log values.
From-SVN: r277405
Make these functions restore the default handlers when passed a null
pointer. This is consistent with std::pmr::set_default_resource(0), and
also matches the current behaviour of libc++.
In order to avoid duplicating the preprocessor condition from
eh_term_handler.cc more that into a new eh_term_handler.h header and
define a macro that can be used in both eh_term_handler.cc and
eh_terminate.cc.
Backport from mainline
2019-05-31 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90682
* libsupc++/eh_term_handler.cc: Include eh_term_handler.h to get
definition of _GLIBCXX_DEFAULT_TERM_HANDLER.
* libsupc++/eh_term_handler.h: New header defining
_GLIBCXX_DEFAULT_TERM_HANDLER.
* libsupc++/eh_terminate.cc: Include eh_term_handler.h.
(set_terminate): Restore default handler when argument is null.
(set_unexpected): Likewise.
* testsuite/18_support/set_terminate.cc: New test.
* testsuite/18_support/set_unexpected.cc: New test.
From-SVN: r277393
The current generic implementation of __complex_proj used when cproj is
not available calculates the wrong projection, giving a different result
than given by C99's cproj.
When C99 cproj is not available but isinf and copysign are, use those to
give correct results for float, double and long double. Otherwise, and
for other specializations of std::complex, just use a generic version
that returns its argument, and so doesn't support infinities.
We might want to consider adding additional overloads of __complex_proj
to support extended types such as _Float64x, _Float128 etc.
Backport from mainline
2019-05-01 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/61761
* include/std/complex (__complex_proj): Return parameter unchanged.
[_GLIBCXX_USE_C99_COMPLEX] (__complex_proj): Change overloads for
floating-point types to take std::complex arguments.
[_GLIBCXX_USE_C99_MATH_TR1] (__complex_proj): Add overloads for
floating-point types.
* testsuite/26_numerics/complex/proj.cc: New test.
From-SVN: r277392
Backport from mainline
2019-06-06 Jonathan Wakely <jwakely@redhat.com>
* testsuite/20_util/is_nothrow_invocable/value.cc: Test converting to
void.
* testsuite/experimental/names.cc: Do not run for C++98 mode. Do not
include Library Fundamentals or Networking headers in C++11 mode.
* testsuite/ext/char8_t/atomic-1.cc: Do not run for C++98 mode.
From-SVN: r277390
The memmove optimizations for std::uninitialized_copy/fill/_n will
compile even if the type is not copy constructible, because std::copy
doesn't require copy construction to work. But the uninitialized
algorithms do require it.
This adds explicit static assertions to ensure we don't allow ill-formed
initializations.
Backport from mainline
2019-08-30 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/89164
* include/bits/stl_algobase.h (__copy_move): Give descriptive names
to template parameters.
* include/bits/stl_uninitialized.h (uninitialized_copy)
(uninitialized_fill, uninitialized_fill_n): Add static assertions to
diagnose invalid uses.
* testsuite/20_util/specialized_algorithms/uninitialized_copy/1.cc:
Adjust expected error.
* testsuite/20_util/specialized_algorithms/uninitialized_copy/89164.cc:
New test.
* testsuite/20_util/specialized_algorithms/uninitialized_copy_n/
89164.cc: New test.
* testsuite/20_util/specialized_algorithms/uninitialized_fill/89164.cc:
New test.
* testsuite/20_util/specialized_algorithms/uninitialized_fill_n/
89164.cc: New test.
* testsuite/23_containers/vector/cons/89164.cc: New test.
* testsuite/23_containers/vector/cons/89164_c++17.cc: New test.
From-SVN: r277388
Backport from mainline
2019-10-22 Jonathan Wakely <jwakely@redhat.com>
* include/bits/memoryfwd.h (uses_allocator): Do not declare for C++98.
* testsuite/17_intro/names.cc: Check uses_allocator in C++98.
From-SVN: r277387
OS X 10.15 adds aligned_alloc but it has the same restriction as the AIX
version, namely that alignments smaller than sizeof(void*) are not
supported.
Backport from mainline
2019-10-18 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/92143
* libsupc++/new_opa.cc (operator new) [__APPLE__]: Increase alignment
to at least sizeof(void*).
From-SVN: r277386
Backport from mainline
2019-06-06 Jonathan Wakely <jwakely@redhat.com>
* testsuite/23_containers/unordered_map/requirements/debug_container.cc:
Do not test allocator rebinding extension for C++2a.
* testsuite/23_containers/unordered_set/allocator/ext_ptr.cc: Change
dg-do directive for C++17 and C++2a.
From-SVN: r277385
One of the static assertions in 20_util/function_objects/invoke/1.cc was
wrong, but didn't fail because by default it was compiled with
-std=gnu++14 which didn't use that static assertion. Split out the C++17
parts to a new file that always runs with -std=gnu++17, so those checks
are always done. Also backport some extra tests from an earlier commit
on trunk (r271173).
The 23_containers/unordered_set/allocator/ext_ptr.cc test is supposed to
be a run-time test but was unintentionally compile-only.
Backport from mainline
2019-05-23 Jonathan Wakely <jwakely@redhat.com>
* testsuite/20_util/function_objects/invoke/1.cc: Add more tests.
Move C++17-specific tests to ...
* testsuite/20_util/function_objects/invoke/3.cc: New test.
* testsuite/23_containers/unordered_set/allocator/ext_ptr.cc: Change
"compile" test to "run".
From-SVN: r277384
Also remove the creation of the html/ext sub-directory, which has been
unused since revision r245258.
Backport from mainline
2019-10-08 Jonathan Wakely <jwakely@redhat.com>
* doc/Makefile.am (doc-html-docbook-regenerate): New target.
(${docbook_outdir}/html): Do not create unused 'html/ext' directory.
* doc/Makefile.in: Regenerate.
* doc/xml/manual/documentation_hacking.xml: Document new target.
* doc/html/*: Regenerate.
From-SVN: r277383
In C++17 a function can return a prvalue of a type that cannot be moved
or copied. The current implementation of std::is_invocable_r uses
std::is_convertible to test the conversion to R required by INVOKE<R>.
That fails for non-copyable prvalues, because std::is_convertible is
defined in terms of std::declval which uses std::add_rvalue_reference.
In C++17 conversion from R to R involves no copies and so is not the
same as conversion from R&& to R.
This commit changes std::is_invocable_r to check the conversion without
using std::is_convertible.
std::function also contains a similar check using std::is_convertible,
which can be fixed by simply reusing std::is_invocable_r (but because
std::is_invocable_r is not defined for C++11 it uses the underlying
std::__is_invocable_impl trait directly).
Backport from mainline
2019-08-15 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/91456
* include/bits/std_function.h (__check_func_return_type): Remove.
(function::_Callable): Use std::__is_invocable_impl instead of
__check_func_return_type.
* include/std/type_traits (__is_invocable_impl): Add another defaulted
template parameter. Define a separate partial specialization for
INVOKE and INVOKE<void>. For INVOKE<R> replace is_convertible check
with a check that models delayed temporary materialization.
* testsuite/20_util/function/91456.cc: New test.
* testsuite/20_util/is_invocable/91456.cc: New test.
From-SVN: r277380
Backport from mainline
2019-09-30 Andreas Tobler <andreast@gcc.gnu.org>
* include/experimental/internet: Include netinet/in.h if we have
_GLIBCXX_HAVE_NETINET_IN_H defined.
From-SVN: r277379
Backport from mainline
2019-09-26 Jonathan Wakely <jwakely@redhat.com>
* include/experimental/internet (operator==, operator<): Fix loop
condition to avoid reading past the end of the array.
From-SVN: r277378
Backport from mainline
2019-08-06 Jonathan Wakely <jwakely@redhat.com>
P1651R0 bind_front should not unwrap reference_wrapper
* include/std/functional (bind_front): Don't unwrap reference_wrapper.
* include/std/version (__cpp_lib_bind_front): Update value.
* testsuite/20_util/function_objects/bind_front/1.cc: Fix test for
feature test macro.
* testsuite/20_util/function_objects/bind_front/2.cc: New test.
From-SVN: r277377
Backport from mainline
2019-10-11 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/92059
* include/tr2/dynamic_bitset (__dynamic_bitset_base): Define all
special member functions as defaulted. Add noexcept to most members.
(__dynamic_bitset_base(size_t, unsigned long long, const _Alloc&)):
Mask off unwanted bits in the __val parameter. Avoid undefined left
shifts.
(__dynamic_bitset_base::_M_assign): Remove.
(__dynamic_bitset_base::_M_do_reset): Use std::fill.
(__dynamic_bitset_base::_M_are_all_aux): Avoid integer promotion when
block_type has lower rank than int.
(dynamic_bitset): Add noexcept to most members. Use injected-class-name
in return types and parameter types.
(dynamic_bitset::_M_Nb): Add default member initializer.
(dynamic_bitset(), dynamic_bitset(const dynamic_bitset&)): Define as
defaulted.
(dynamic_bitset(dynamic_bitset&&)): Clear source object after move.
(dynamic_bitset::operator=(const dynamic_bitset&)): Define as
defaulted.
(dynamic_bitset::operator=(dynamic_bitset&&)): Add noexcept-specifier.
Define without using swap, to propagate allocator correctly.
(dynamic_bitset(const char*, const _Alloc&)): Use strlen.
(dynamic_bitset::_M_do_sanitize, dynamic_bitset::_M_do_fill): Use
casts to avoid unwanted integer promotions.
(dynamic_bitset::_M_copy_from_ptr): Rearrange template parameters and
add default template arguments and default argument to simplify usage.
(dynamic_bitset::_M_copy_from_string): Adjust call to _M_copy_from_ptr.
(operator==(const dynamic_bitset&, const dynamic_bitset&))
(operator<(const dynamic_bitset&, const dynamic_bitset&)): Use _M_Nb.
* include/tr2/dynamic_bitset.tcc (dynamic_bitset::_M_copy_from_ptr):
Adjust template parameters to match declaration.
* testsuite/tr2/dynamic_bitset/cmp.cc: New test.
* testsuite/tr2/dynamic_bitset/cons.cc: New test.
* testsuite/tr2/dynamic_bitset/copy.cc: New test.
* testsuite/tr2/dynamic_bitset/move.cc: New test.
* testsuite/tr2/dynamic_bitset/pr92059.cc: New test.
From-SVN: r277376
Backport from mainline
2019-10-08 Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* config.gcc: Move -L usage from LINK_OS_EXTRA_SPEC32 and
LINK_OS_EXTRA_SPEC64 to MD_STARTFILE_PREFIX and
MD_STARTFILE_PREFIX_1 when using --with-advance-toolchain.
From-SVN: r277353
2019-10-23 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-27 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91885
* gcc.dg/pr91885.c (__int64_t): Change from long to long long.
(__uint64_t): Change from unsigned long to unsigned long long.
From-SVN: r277318
2019-10-23 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-26 Martin Liska <mliska@suse.cz>
PR tree-optimization/91885
* tree-vectorizer.c (try_vectorize_loop_1):
Add TODO_update_ssa_only_virtuals similarly to what slp
pass does.
2019-10-23 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-26 Martin Liska <mliska@suse.cz>
PR tree-optimization/91885
* gcc.dg/pr91885.c: New test.
From-SVN: r277317
PR tree-optimization/92131
* tree-vrp.c (extract_range_from_plus_minus_expr): If the resulting
range would be symbolic, drop to varying for any explicit overflow
in the constant part or if neither range is a singleton.
From-SVN: r277315
2019-10-23 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-10-17 Richard Biener <rguenther@suse.de>
PR debug/91887
* dwarf2out.c (gen_formal_parameter_die): Also try to match
context_die against a DW_TAG_GNU_formal_parameter_pack parent.
* g++.dg/debug/dwarf2/pr91887.C: New testcase.
From-SVN: r277312
2019-10-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/92174
* decl.c (attr_decl1): Move check for F2018:C822 from here ...
* array.c (gfc_set_array_spec): ... to here.
From-SVN: r277298
Backported from mainline
2019-10-17 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/92056
* tree-object-size.c (cond_expr_object_size): Return early if then_
processing resulted in unknown size.
* gcc.c-torture/compile/pr92056.c: New test.
From-SVN: r277259
Backported from mainline
2019-10-05 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91734
* generic-match-head.c: Include fold-const-call.h.
* match.pd (sqrt(x) cmp c): Check the boundary value and
in case inexact computation of c*c affects comparison of the boundary,
turn LT_EXPR into LE_EXPR, GE_EXPR into GT_EXPR, LE_EXPR into LT_EXPR
or GT_EXPR into GE_EXPR. Punt for sqrt comparisons against NaN and
for -frounding-math. For c2, try the next smaller or larger floating
point constant depending on comparison code and if it has the same
sqrt as c2, use it instead of c2.
* gcc.dg/pr91734.c: New test.
From-SVN: r277257
Backported from mainline
2019-10-04 Jakub Jelinek <jakub@redhat.com>
PR c++/91974
* cp-gimplify.c (cp_gimplify_expr) <case CALL_EXPR>: For
-fstrong-eval-order ensure CALL_EXPR_FN side-effects are evaluated
before any arguments. Additionally, ensure CALL_EXPR_FN that isn't
invariant nor OBJ_TYPE_REF nor SSA_NAME is forced into a temporary.
* g++.dg/cpp1z/eval-order5.C: New test.
From-SVN: r277256
Backported from mainline
2019-09-27 Jakub Jelinek <jakub@redhat.com>
PR c++/88203
* c-common.h (c_omp_predefined_variable): Declare.
* c-omp.c (c_omp_predefined_variable): New function.
(c_omp_predetermined_sharing): Return OMP_CLAUSE_DEFAULT_SHARED
for predefined variables.
* c-parser.c (c_parser_predefined_identifier): New function.
(c_parser_postfix_expression): Use it.
(c_parser_omp_variable_list): Parse predefined identifiers.
* c-typeck.c (c_finish_omp_clauses): Allow predefined variables
in shared and firstprivate clauses, even when they are predetermined
shared.
* parser.c (cp_parser_omp_var_list_no_open): Parse predefined
variables.
* semantics.c (finish_omp_clauses): Allow predefined variables in
shared and firstprivate clauses, even when they are predetermined
shared.
* cp-gimplify.c (cxx_omp_predetermined_sharing_1): Return
OMP_CLAUSE_DEFAULT_SHARED for predefined variables.
* c-c++-common/gomp/pr88203-1.c: New test.
* c-c++-common/gomp/pr88203-2.c: New test.
* c-c++-common/gomp/pr88203-3.c: New test.
From-SVN: r277253
Backported from mainline
2019-09-11 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91723
* tree-vect-stmts.c (vectorizable_call): Use types_compatible_p check
instead of pointer equality when checking if argument vectypes are
the same.
* gcc.dg/vect/vect-fma-3.c: New test.
From-SVN: r277250
Backported from mainline
2019-09-07 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91665
* tree-vect-loop.c (vectorizable_reduction): Punt if base has type
incompatible with the type of PHI result.
* gcc.dg/vect/pr91665.c: New test.
From-SVN: r277249
Backported from mainline
2019-09-06 Jakub Jelinek <jakub@redhat.com>
* function.c (assign_parm_find_data_types): Use RECORD_OR_UNION_TYPE_P
before testing TYPE_TRANSPARENT_AGGR.
* calls.c (initialize_argument_information, load_register_parameters):
Likewise.
2019-09-05 Jakub Jelinek <jakub@redhat.com>
PR middle-end/91001
PR middle-end/91105
PR middle-end/91106
* calls.c (load_register_parameters): For TYPE_TRANSPARENT_AGGR
types, use type of their first field instead of type of
args[i].tree_value.
* gcc.c-torture/compile/pr91001.c: New test.
From-SVN: r277248
Backported from mainline
2019-09-02 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91632
* gcc.c-torture/execute/pr91632.c: New test.
From-SVN: r277247
Backported from mainline
2019-09-01 Jakub Jelinek <jakub@redhat.com>
PR middle-end/91623
* optabs.c (expand_vec_cond_expr): If op0 is a VECTOR_CST and only
EQ_EXPR/NE_EXPR is supported, verify that op0 only contains
zeros or negative elements and use NE_EXPR instead of LT_EXPR against
zero vector.
* gcc.target/i386/pr91623.c: New test.
From-SVN: r277246
Backported from mainline
2019-09-01 Jakub Jelinek <jakub@redhat.com>
PR lto/91572
* tree.c (find_decls_types_in_node): Also walk TREE_PURPOSE of
GIMPLE_ASM TREE_LIST operands.
* g++.dg/lto/pr91572_0.C: New test.
From-SVN: r277245
Backported from mainline
2019-09-02 Jakub Jelinek <jakub@redhat.com>
PR go/91617
* fold-const.c (range_check_type): For enumeral and boolean
type, pass 1 to type_for_size langhook instead of
TYPE_UNSIGNED (etype). Return unsigned_type_for result whenever
etype isn't TYPE_UNSIGNED INTEGER_TYPE.
(build_range_check): Don't call unsigned_type_for for pointer types.
* match.pd (X / C1 op C2): Don't call unsigned_type_for on
range_check_type result.
2019-08-29 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91351
* tree-cfg.c (generate_range_test): Use range_check_type instead of
unsigned_type_for.
* tree-cfgcleanup.c (convert_single_case_switch): Punt if
range_check_type returns NULL.
* tree-switch-conversion.c (switch_conversion::build_one_array):
Use range_check_type instead of unsigned_type_for, don't perform
linear opt if it returns NULL.
(bit_test_cluster::find_bit_tests): Formatting fix.
(bit_test_cluster::emit): Use range_check_type instead of
unsigned_type_for.
(switch_decision_tree::try_switch_expansion): Punt if range_check_type
returns NULL.
* g++.dg/opt/pr91351.C: New test.
From-SVN: r277244
Backported from mainline
2019-08-09 Jakub Jelinek <jakub@redhat.com>
PR c/91401
* c-parser.c (c_parser_omp_clause_dist_schedule): Fix up typos in the
check_no_duplicate_clause call. Comment it out, instead emit a
warning for duplicate dist_schedule clauses.
* parser.c (cp_parser_omp_clause_dist_schedule): Comment out the
check_no_duplicate_clause call, instead emit a warning for duplicate
dist_schedule clauses.
* c-c++-common/gomp/pr91401-1.c: New test.
* c-c++-common/gomp/pr91401-2.c: New test.
From-SVN: r277243
2019-10-18 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/69455
* trans-decl.c (generate_local_decl): Avoid misconstructed
intrinsic modules in a BLOCK construct.
2019-10-18 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/69455
* gfortran.dg/pr69455_1.f90: New test.
* gfortran.dg/pr69455_2.f90: Ditto.
From-SVN: r277160
Darwin's linker doesn't like text section relocations (they require special
enabling). The Fortran FE, at least, seems to generate cases where the
initialiser for a pointer constant can need a relocation. We can handle
this by special-casing SECCAT_RODATA when the relocation is present by
placing the constant in the .const_data section.
gcc/
2019-10-18 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-05 Iain Sandoe <iain@sandoe.co.uk>
PR target/59888
* config/darwin.c (darwin_rodata_section): Add relocation flag,
choose const_data section for constants with relocations.
(machopic_select_section): Pass relocation flag to
darwin_rodata_section ().
From-SVN: r277145
Some changes were missed here in the transition to LRA. The Darwin
archs are all using LRA now, testing for reload is not correct.
2019-10-18 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-09-21 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (machopic_legitimize_pic_address): Check
for lra, rather than reload.
From-SVN: r277144
Armv6 has support for unaligned accesses to memory. However, the
thumb1 code patterns were trying to use the 32-bit code constraints.
One failure mode from this was that the patterns are designed to be
compatible with conditional execution and this was then causing an
assert in the compiler.
The unaligned_loadhis pattern is only used for expanding extv, which
in turn is only enabled for systems supporting thumb2. Given that
there is no simple expansion for a thumb1 sign-extending load (the
instruction has no immediate offset form and requires two registers in
the address) it seems simpler to just disable this for thumb1.
Fixed thusly:
Backport from trunk:
2019-05-03 Richard Earnshaw <rearnsha@arm.com>
PR target/89400
* config/arm/arm.md (unaligned_loadsi): Add variant for thumb1.
Restrict 'all' variant to 32-bit configurations.
(unaligned_loadhiu): Likewise.
(unaligned_storehi): Likewise.
(unaligned_storesi): Likewise.
(unaligned_loadhis): Disable when compiling for thumb1.
From-SVN: r277123
2019-10-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/83113
PR fortran/89943
decl.c (gfc_match_function_decl): Ignore duplicate BIND(C) for function
declaration in submodule. Implement at check for F2018 C1550.
(gfc_match_entry): Use temporary for locus, which allows removal of
one gfc_error_now().
(gfc_match_subroutine): Ignore duplicate BIND(C) for subroutine
declaration in submodule. Implement at check for F2018 C1550.
2019-10-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/83113
PR fortran/89943
* gfortran.dg/pr89943_1.f90: New test.
* gfortran.dg/pr89943_2.f90: Ditto.
* gfortran.dg/pr89943_3.f90: Ditto.
* gfortran.dg/pr89943_4.f90: Ditto.
From-SVN: r277122
2019-10-17 Bill Schmidt <wschmidt@linux.ibm.com>
Backport from mainline
2019-10-15 Bill Schmidt <wschmidt@linux.ibm.com>
PR target/92093
* gcc.target/powerpc/pr91275.c: Fix type and endian issues.
From-SVN: r277117
For compatibility with xcrun and the behaviour of the clang driver, make use
of the setting of the SDKROOT environment variable when it is available.
This applies to both finding headers and libraries (i.e. it is also passed to
ld64).
Priority:
1. User's command-line specified --sysroot= or -isysroot.
2. The SDKROOT variable when set, and validated.
3. Any sysroot provided by --with-sysroot= configuration parameter.
SDKROOT is checked thus:
1. Presence.
2. That it starts with / (i.e. 'absolute').
3. That it is not / only (since that's the default).
4. That it is readable by the process executing the driver.
This is pretty much the same rule set as used by the clang driver.
NOTE: (3) might turn out to be overly restrictive in the case that we
have configured with --with-sysroot= and then we want to run on a system
with an installation of the headers/libraries in /. We can revisit this
if that turns out to be an important use-case.
So one can do:
xcrun --sdk macosx /path/to/gcc ....
and that provides the SDK path as the sysroot to GCC as expected.
CAVEAT: An unfortunate effect of the fact that gcc (and g++) are
executables in the Xcode installation, which are found ahead of any such
named in the /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Library/TeX/texbin:/usr/local/tools/gcc-2016/bin:
PATH=/path/to/gcc/install:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Library/TeX/texbin:/usr/local/tools/gcc-2016/bin
xcrun --sdk macosx gcc ....
does *not* work, instead that executes the clang from the xcode/commmand
line tools installation.
PATH=/path/to/gcc/install:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/Library/TeX/texbin:/usr/local/tools/gcc-2016/bin
xcrun --sdk macosx x64_64-apple-darwinXX-gcc ...
does work as expected, however.
2019-10-16 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-10-03 Iain Sandoe <iain@sandoe.co.uk>
PR target/87243
* config/darwin-driver.c (maybe_get_sysroot_from_sdkroot): New.
(darwin_driver_init): Use the sysroot provided by SDKROOT when that
is available and the user has not set one on the command line.
From-SVN: r277079
pie, no-pie and rdynamic are driver options, we can process them in the
relevant place and drop them once dealt with. There's no need to generate
a new header to process the no_compact_unwind which is applied on the
basis of the target system.
Support for the -pie, -no_pie and -no_compact_unwind options should ideally
be checked at configure time, however the status quo is to assert that linkers
capable of targeting the relevant systems support these options (i.e. we trust
that the user doesn't attempt to configure inappropriately).
TODO: check the availability of the linker opts in configure rather than
trusting to the user.
This will fix the fail of pie-7.c, which is a result of failing to handle the
no-pie driver option.
2019-10-16 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-07-03 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h (DRIVER_SELF_SPECS): Remove the linker cases.
(RDYNAMIC): Rename to, DARWIN_RDYNAMIC.
(DARWIN_PIE_SPEC, DARWIN_NOPIE_SPEC): Adjust to remove the Xlinker
clauses.
(LINK_COMMAND_SPEC_A): Add DARWIN_RDYNAMIC, DARWIN_PIE_SPEC and
DARWIN_NOPIE_SPEC.
Backport from mainline
2019-06-19 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.h (DRIVER_SELF_SPECS): Add RDYNAMIC, DARWIN_PIE_SPEC
and DARWIN_NOPIE_SPEC.
(RDYNAMIC): New, modified from DARWIN_EXPORT_DYNAMIC.
(DARWIN_PIE_SPEC): Collate from darwin.h and darwin9.h.
(DARWIN_NOPIE_SPEC): Collate from darwin10.h.
(DARWIN_NOCOMPACT_UNWIND): New from darwin10.h
(DARWIN_EXPORT_DYNAMIC): Delete.
* config/darwin10.h (LINK_GCC_C_SEQUENCE_SPEC): Move no_compact_unwind
and pie options processing to darwin.h.
* config/darwin9.h (DARWIN_PIE_SPEC): Move pie processing to darwin.h
From-SVN: r277078
2019-10-16 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-10-04 Richard Biener <rguenther@suse.de>
PR lto/91968
* tree.c (find_decls_types_r): Do not remove LABEL_DECLs from
BLOCK_VARS.
2019-10-02 Richard Biener <rguenther@suse.de>
PR c++/91606
* decl.c (build_ptrmemfunc_type): Mark pointer-to-member
fat pointer structure members as DECL_NONADDRESSABLE_P.
* g++.dg/torture/pr91606.C: New testcase.
2019-09-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/91812
* tree-ssa-phiprop.c (propagate_with_phi): Do not replace
volatile loads.
* gcc.dg/torture/pr91812.c: New testcase.
2019-09-17 Richard Biener <rguenther@suse.de>
PR debug/91772
* dwarf2out.c (dwarf2out_late_global_decl): If early dwarf
was missing generate locations only once.
2019-09-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/91790
* tree-vect-stmts.c (vectorizable_load): For BB vectorization
use the correct DR for setting up realignment.
From-SVN: r277055
* config/pa/fptr.c (_dl_read_access_allowed): Change argument to
unsigned int. Adjust callers.
(__canonicalize_funcptr_for_compare): Change plabel type to volatile
unsigned int *. Load relocation offset before function pointer.
Add barrier to ensure ordering.
From-SVN: r277016
* config/pa/lib2funcs.S (__gcc_plt_call): Load branch target to %r21.
Load PIC register after branch target. Fix white space.
* config/pa/milli64.S ($$dyncall): Separate LINUX and non LINUX
implementations. Load PIC register after branch target. Don't
clobber function pointer when it points to function descriptor.
Use nullification instead of branch in LINUX implementation.
From-SVN: r276927
PR ada/91995
* sem_ch8.adb (Chain_Use_Clause): Remove second argument in calls
to Defining_Entity.
* sem_elab.adb (Find_Unit_Entity): Likewise. Deal with N_Subunit
here in lieu of in Defining_Entity.
* sem_spark.adb (Check_Callable_Body): Likewise.
(Check_Package_Body): Likewise.
* sem_util.ads (Defining_Entity): Remove 2nd and 3th parameters.
* sem_util.adb (Defining_Entity): Remove 2nd and 3th parameters,
and adjust accordingly. Deal with N_Compilation_Unit.
From-SVN: r276917
2019-10-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91715
* decl.c (gfc_match_prefix): If matching a type-spec returns an error,
it's an error so re-act correctly.
2019-10-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91715
* gfortran.dg/function_kinds_5.f90: Prune run-on error.
* gfortran.dg/pr85543.f90: Ditto.
* gfortran.dg/pr91715.f90: New test.
From-SVN: r276905
2019-10-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91649
check.c (gfc_check_findloc): Additional checking for valid arguments
2019-10-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91649
* gfortran.dg/pr91649.f90: New test.
From-SVN: r276904
* gcc-interface/decl.c (annotate_value) <INTEGER_CST>: Really test the
sign of the value when deciding to build a NEGATE_EXPR.
<PLUS_EXPR>: Remove redundant line.
<BIT_AND_EXPR>: Do the negation here.
From-SVN: r276867
2019-10-10 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91801
* simplify.c (gfc_simplify_reshape): Convert a gcc_assert into a
gfc_error as a user can easily hit the condition.
2019-10-10 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91801
* gfortran.dg/pr91801.f90: New test.
From-SVN: r276853
gcc/
Backport from mainline
2019-10-10 Oleg Endo <olegendo@gcc.gnu.org>
PR target/88630
* config/sh/sh.h (TARGET_FPU_SH4_300): New macro.
* config/sh/sh.c (sh_option_override): Enable fsca and fsrra insns
also for TARGET_FPU_SH4_300.
(sh_emit_mode_set): Check for TARGET_FPU_SH4_300 instead of
TARGET_SH4_300.
* config/sh/sh.md (toggle_pr): Add TARGET_FPU_SH4_300 condition.
(negsf2): Expand to either negsf2_fpscr or negsf2_no_fpscr.
(*negsf2_i): Split into ...
(negsf2_fpscr, negsf2_no_fpscr): ... these new patterns.
(abssf2): Expand to either abssf2_fpsc or abssf2_no_fpsc.
(**abssf2_i): Split into ...
(abssf2_fpscr, abssf2_no_fpscr): ... these new patterns.
(negdf2): Expand to either negdf2_fpscr or negdf2_no_fpscr.
(*negdf2_i): Split into ...
(negdf2_fpscr, negdf2_no_fpscr): ... these new patterns.
(absdf2): Expand to either absdf2_fpscr or absdf2_no_fpsc.
(**abssf2_i): Split into ...
(absdf2_fpscr, absdf2_no_fpscr): ... these new patterns.
From-SVN: r276825
So far z15 was identified as arch13. After the machine has been
announced we can now add the real name.
gcc/ChangeLog:
2019-10-10 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-10-10 Andreas Krebbel <krebbel@linux.ibm.com>
* common/config/s390/s390-common.c (PF_ARCH13): Rename to...
(PF_Z15): ... this.
* config.gcc: Add z15 as option for --with-arch and --with-tune
configure switches.
* config/s390/s390-c.c (s390_resolve_overloaded_builtin): Add
error reporting for unsupported builtins.
* config/s390/s390-opts.h (enum processor_type): Rename
PROCESSOR_8561_ARCH13 to PROCESSOR_8561_Z15.
* config/s390/8561.md: Rename arch13 to z15 throughout the file.
* config/s390/driver-native.c (s390_host_detect_local_cpu):
Likewise.
* config/s390/s390-builtins.def: Likewise.
* config/s390/s390.c (processor_table): Add z15 as option and keep arch13 as alternative.
(s390_expand_builtin): Add missing check for unsupported builtins.
(s390_canonicalize_comparison): Rename TARGET_ARCH13 to TARGET_Z15.
(s390_rtx_costs): Likewise.
(s390_get_sched_attrmask): Rename arch13 to z15.
(s390_get_unit_mask): Likewise.
(s390_is_fpd): Likewise.
(s390_is_fxd): Likewise.
* config/s390/s390.h (enum processor_flags): Likewise.
* config/s390/s390.md: Likewise.
* config/s390/vector.md: Likewise.
* config/s390/vx-builtins.md: Likewise.
* config/s390/s390.opt: Add z15 to processor_type value.
From-SVN: r276793
2019-10-07 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/84487
* trans-decl.c (gfc_get_symbol_decl): For __def_init, set
DECL_ARTIFICAL and do not set TREE_READONLY.
2019-10-07 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/84487
* gfortran.dg/typebound_call_22.f03: xfail.
From-SVN: r276672
2019-10-05 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/47054
* decl.c (variable_decl): Do not search parent namespace for symbol.
2019-10-05 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/47054
* gfortran.dg/pr47054_1.f90: New test
* gfortran.dg/pr47054_2.f90: Ditto.
From-SVN: r276628
2019-10-04 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91942
* io.c (match_vtag): Check for non-NULL result->symtree.
(match_out_tag): Check for invalid constant due to inquiry parameter.
(match_filepos): Instead of a syntax error, go to cleanup to get better
error messages.
2019-10-04 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91942
* gfortran.dg/pr91587.f90: Update dg-error regex.
* gfortran.dg/pr91942.f90: New test.
From-SVN: r276620
2019-10-04 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91785
* primary.c (gfc_match_varspec): Ensure an inquiry parameter has
it locus set.
2019-10-04 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91785
* gfortran.dg/pr91785.f90: New test.
From-SVN: r276619
Fixes PR target/91474 and PR target/91702.
2019-10-04 Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Backport from mainline
2019-07-07 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/mips/mips.c (mips_split_move): Zero-initialize addr
and check whether addr.reg is nonnull before using it.
From-SVN: r276569
2019-10-02 Bernd Edlinger <bernd.edlinger@hotmail.de>
Backport from mainline
2019-09-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
PR fortran/91716
* trans-array.c (gfc_conv_array_initializer): Always assign the
array type of the field to the string constant.
PR fortran/91716
* gfortran.dg/pr91716.f90: New test.
From-SVN: r276458
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91864
* gcc/fortran/io.c (match_io_element): An inquiry parameter cannot be
read into.
* gcc/fortran/match.c (gfc_match_allocate): An inquiry parameter
can be neither an allocate-object nor stat variable.
(gfc_match_deallocate): An inquiry parameter cannot be deallocated.
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91864
* gcc/testsuite/gfortran.dg/pr91864.f90
From-SVN: r276425
2019-10-01 Steven G. Kargl <kargl@gcc.ngu.org>
Backport of r276254+276265
PR fortran/91802
* decl.c (attr_decl1): Check if rank+corank > 15.
2019-10-01 Steven G. Kargl <kargl@gcc.ngu.org>
PR fortran/91802
* gfortran.dg/pr91802.f90: New test.
From-SVN: r276423
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91714
* decl.c (gfc_match_decl_type_spec): Issue errors for a few
mangled types.
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91714
* gfortran.dg/dec_type_print_3.f90: Update dg-error regex.
* gfortran.dg/pr91714.f90: New test.
From-SVN: r276421
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91641
* check.c (gfc_check_is_contiguous): null() cannot be an actual
argument to is_contiguous().
2019-10-01 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91641
* gfortran.dg/pr91641.f90: New test.
From-SVN: r276419
Backport from mainline
2019-08-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/arm/arm_acle.h: Use arch=armv8-a+crc+simd pragma for CRC32
intrinsics if __ARM_FP.
Use __ARM_FEATURE_CRC32 ifdef guard.
* gcc.target/arm/acle/crc_hf_1.c: New test.
From-SVN: r276126
* gcc-interface/trans.c (Attribute_to_gnu): Test Can_Use_Internal_Rep
on the underlying type of the node.
(Call_to_gnu): Likewise with the type of the prefix.
From-SVN: r276042
Stack pointer adjustment code in prologue missed a case of no
callee-saved registers and a stack frame size bigger than 128 bytes.
Handle that case.
This fixes the following gcc tests with call0 ABI:
gcc.c-torture/execute/stdarg-2.c
gcc.dg/torture/pr55882.c
gcc.dg/torture/pr57569.c
gcc/
2019-09-23 Max Filippov <jcmvbkbc@gmail.com>
Backport from mainline
2019-06-18 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/xtensa.c (xtensa_expand_prologue): Add stack
pointer adjustment for the case of no callee-saved registers and
stack frame bigger than 128 bytes.
From-SVN: r276037
This adds RejectNegative in a number of places it was needed,
reorders the opts into two groups (one general and one driver-only).
We also add a minimal description to each opt, and note some that
are now obsolete. The only functional change is to permit
-mtarget-linker= as an alias of -mtarget-linker.
This fixes the Darwin part of PR89327
2019-09-22 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-16 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.opt (prebind, noprebind, seglinkedit,
noseglinkedit): Add RejectNegative.
Backport from mainline
2019-06-14 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.opt: Add RejectNegative where needed, reorder
and add minimal functional descriptions.
From-SVN: r276031
2019-09-21 Paul Thomas <pault@gcc.gnu.org>
Backport from mainline
PR fortran/91588
* expr.c (check_inquiry): Remove extended component refs by
using symbol pointers. If a function argument is an associate
variable with a constant target, copy the target expression in
place of the argument expression. Check that the charlen is not
NULL before using the string length.
2019-09-21 Paul Thomas <pault@gcc.gnu.org>
Backport from mainline
PR fortran/91588
* gfortran.dg/associate_49.f90 : New test.
From-SVN: r276016
Fix PR88751
This patch implements a small improvement for the heuristic in lra
which decides when it has to activate the simpler register allocation
algorithm.
gcc/ChangeLog:
2019-09-20 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-06-06 Andreas Krebbel <krebbel@linux.ibm.com>
PR rtl-optimization/88751
* ira.c (ira): Use the number of the actually referenced registers
when calculating the threshold.
From-SVN: r276000
PR target/91683
* config/riscv/riscv-protos.h (riscv_split_symbol): New bool parameter.
(riscv_move_integer): Likewise.
* config/riscv/riscv.c (riscv_split_integer): Pass FALSE for new
riscv_move_integer arg.
(riscv_legitimize_move): Likewise.
(riscv_force_temporary): New parameter in_splitter. Don't call
force_reg if true.
(riscv_unspec_offset_high): Pass FALSE for new riscv_force_temporary
arg.
(riscv_add_offset): Likewise.
(riscv_split_symbol): New parameter in_splitter. Pass to
riscv_force_temporary.
(riscv_legitimize_address): Pass FALSE for new riscv_split_symbol
arg.
(riscv_move_integer): New parameter in_splitter. New local
can_create_psuedo. Don't call riscv_split_integer or force_reg when
in_splitter TRUE.
(riscv_legitimize_const_move): Pass FALSE for new riscv_move_integer,
riscv_split_symbol, and riscv_force_temporary args.
* config/riscv/riscv.md (low<mode>+1): Pass TRUE for new
riscv_move_integer arg.
(low<mode>+2): Pass TRUE for new riscv_split_symbol arg.
From-SVN: r275997
2019-09-19 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91727
* resolve.c (conformable_arrays): If array-spec is NULL, then
allocate-object is a scalar. a conformability check only occurs
for an array source-expr.
2019-09-19 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91727
* gfortran.dg/pr91727.f90: New test.
From-SVN: r275973
Shifting by more than the size of a SUBREG_REG doesn't work, so we either
need to disable splits if an input is paradoxical, or else we need to
generate a clean temporary for intermediate results.
Jakub wrote the first version of this patch, so gets primary credit for it.
gcc/
PR target/91635
* config/riscv/riscv.md (zero_extendsidi2, zero_extendhi<GPR:mode>2,
extend<SHORT:mode><SUPERQI:mode>2): Don't split if
paradoxical_subreg_p (operands[0]).
(*lshrsi3_zero_extend_3+1, *lshrsi3_zero_extend_3+2): Add clobber and
use as intermediate value.
gcc/testsuite/
PR target/91635
* gcc.c-torture/execute/pr91635.c: New test.
* gcc.target/riscv/shift-shift-4.c: New test.
* gcc.target/riscv/shift-shift-5.c: New test.
From-SVN: r275929
2019-09-18 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91550
* frontend-passes.c (do_subscript): If step equals
zero, a previuos error has been reported; do nothing
in this case.
* resolve.c (gfc_resolve_iterator): Move error checking
after type conversion.
2019-09-18 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91550
* gfortran.dg/do_subscript_6.f90: New test.
From-SVN: r275891
2019-09-15 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91557
* trans-decl.c (generate_local_decl): Do not warn if the symbol
is artificial.
* trans-types.c (get_formal_from_actual_arglist): Set artificial
attribute on dummy arguments.
2019-09-15 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91557
* gfortran.dg/warn_unused_dummy_argument_5.f90: New test.
From-SVN: r275733
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91553
* simplify.c (gfc_convert_constant): During conversion check if the
constant is enclosed in parenthesis, and simplify expression.
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91553
* gfortran.dg/pr91553.f90: New test.
From-SVN: r275716
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91566
* simplify.c (gfc_simplify_merge): Need to simplify expression
after insertation of parenthesis.
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91566
* gfortran.dg/pr91566.f90: New test.
From-SVN: r275715
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91642
* io.c (gfc_match_inquire): null() cannot be in an iolength inquire
list.
2019-09-14 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91642
* gfortran.dg/pr91642.f90: New test.
From-SVN: r275714
PR libstdc++/91748
* include/bits/stl_algo.h (for_each_n): Fix random access iterator
case.
* testsuite/25_algorithms/for_each/for_each_n.cc: Test with random
access iterators.
From-SVN: r275684
PR rtl-optimization/89795
* rtlanal.c (nonzero_bits1) <SUBREG>: Do not propagate results from
inner REGs to paradoxical SUBREGs if WORD_REGISTER_OPERATIONS is set.
From-SVN: r275636
Backport of https://golang.org/cl/194440. Original description:
If an embedded field refers to a type via a pointer, the parser needs
to know the name of the embedded field. It is possible that the
pointer type is not yet resolved. This CL fixes the parser to handle
that case by setting the pointer element type to the unresolved named
type while the pointer is being resolved.
Updates golang/go#34182
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194562
From-SVN: r275607
PR target/87853
* config/i386/emmintrin.h (_mm_cmpeq_epi8): Use casts to __v16qi
instead of __v16qs.
* gcc.target/i386/pr87853.c: New test.
From-SVN: r275510
PR target/91704
* config/i386/avxintrin.h (__v32qs): New typedef.
* config/i386/avx2intrin.h (_mm256_cmpgt_epi8): Use casts to __v32qs
instead of __v32qi.
* gcc.target/i386/pr91704.c: New test.
From-SVN: r275509
2019-09-07 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91589
* primary.c (gfc_match_varspec): Return MATCH_NO on an apparent
component ref, when the primary type is intrinsic.
2019-09-07 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91589
* gfortran.dg/pr91589.f90 : New test.
From-SVN: r275487
PR81800 is about the lrint inline giving spurious FE_INEXACT exceptions.
The previous change for PR81800 didn't fix this: when lrint is disabled
in the backend, the midend will simply use llrint. This actually makes
things worse since llrint now also ignores FE_INVALID exceptions!
The fix is to disable lrint/llrint on double if the size of a long is
smaller (ie. ilp32).
gcc/
PR target/81800
* gcc/config/aarch64/aarch64.md (lrint): Disable lrint pattern if GPF
operand is larger than a long int.
testsuite/
PR target/81800
* gcc.target/aarch64/no-inline-lrint_3.c: New test.
From-SVN: r275373
PR tree-optimization/91597
* tree-vrp.c (extract_range_from_binary_expr): Remove unsafe
BIT_AND_EXPR optimization for pointers, even if both operand
ranges don't include NULL, the result can be NULL.
* gcc.c-torture/execute/pr91597.c: New test.
From-SVN: r275345
2019-09-02 Steven G. Kargl <kargl@gc.gnu.org>
PR fortran/91552
* array.c (walk_array_constructor): New function.
(gfc_match_array_constructor): Use it.
2019-09-02 Steven G. Kargl <kargl@gc.gnu.org>
PR fortran/91552
* gfortran.dg/pr91552.f90: New test.
From-SVN: r275323
2019-09-02 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-02 Martin Liska <mliska@suse.cz>
PR c++/91155
* c-common.c (fname_as_string): Use cxx_printable_name for
__PRETTY_FUNCTION__ same as was used before r265711.
2019-09-02 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-02 Martin Liska <mliska@suse.cz>
PR c++/91155
* g++.dg/torture/pr91155.C: New test.
From-SVN: r275302
2019-09-02 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-09-02 Martin Liska <mliska@suse.cz>
PR gcov-profile/91601
* gcov.c (path_contains_zero_cycle_arc): Rename to ...
(path_contains_zero_or_negative_cycle_arc): ... this and handle
also negative edges.
(circuit): Handle also negative edges as they can happen
in some situations.
From-SVN: r275301
PR target/91472
* config/sparc/sparc.c (sparc_cannot_force_const_mem): Return true
during LRA/reload in PIC mode if the PIC register hasn't been used yet.
(sparc_pic_register_p): Test reload_in_progress for consistency's sake.
From-SVN: r275272
When we are parsing a source file, the very first token might
be a PRAGMA_GCC_PCH_PREPROCESS. This indicates that we are going
read in a PCH file (named as the value of the pragma). If we don't
see this pragma, then we know that it's OK to release any resources
that the host might have set aside for the PCH file.
There is a thinko in the current implementation, in that the decision
to release resources is happening unconditionally right after the first
token is extracted but before it's been checked or acted upon.
This leads to the pch bug on Darwin, because we actually do release
resources - which are subsequently (reasonably) assumed to be available
when reading a PCH file. We then get random crashes or hangs depending
on the interaction between unmmap and malloc.
The bug is present everywhere but doesn't show on (say) Linux, since
the release of PCH resources is a NOP there.
This effects all the c-family front ends, because they all use
c_lex_with_flags () to implement this.
The solution is to check for the PRAGMA_GCC_PCH_PREPROCESS and only call
c_common_no_more_pch () when that is not the first token.
A secondary effect of the collection is that the name of the PCH file
can be collected during the ggc_pch_read() reset of state. Therefore
we should issue any diagnostic that might name the file before the
collections are triggered.
gcc/
2019-08-31 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-08-23 Iain Sandoe <iain@sandoe.co.uk>
PR pch/61250
* ggc-page.c (ggc_pch_read): Read the ggc_pch_ondisk structure
and issue any diagnostics needed before collecting the pre-PCH
state.
gcc/c-family/
2019-08-31 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-08-23 Iain Sandoe <iain@sandoe.co.uk>
PR pch/61250
* c-lex.c (c_lex_with_flags): Don't call
c_common_no_more_pch () from here.
gcc/c/
2019-08-31 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-08-23 Iain Sandoe <iain@sandoe.co.uk>
PR pch/61250
* c-parser.c (c_parse_file): Call c_common_no_more_pch ()
after determining that the first token is not
PRAGMA_GCC_PCH_PREPROCESS.
gcc/cp/
2019-08-31 Iain Sandoe <iain@sandoe.co.uk>
Backported from mainline
2019-08-23 Iain Sandoe <iain@sandoe.co.uk>
PR pch/61250
* parser.c (cp_parser_initial_pragma): Call c_common_no_more_pch ()
after determining that the first token is not
PRAGMA_GCC_PCH_PREPROCESS.
From-SVN: r275246
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91587
* io.c (match_filepos): MATCH_ERROR should branch to a syntax error.
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91587
* gfortran.dg/pr91587.f90: New test.
From-SVN: r275241
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91565
* simplify.c (gfc_simplify_reshape): Add additional checks of the
ORDER dummy argument.
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91565
* gfortran.dg/pr91565.f90: New test.
From-SVN: r275230
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91564
* check.c (gfc_check_kill_sub): Additional checks on status dummy
argument.
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91564
* gfortran.dg/pr91564.f90: New test.
From-SVN: r275229
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91551
* intrinsic.c (sort_actual): ALLOCATED has one argument. Check for
no argument case.
2019-08-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91551
* gfortran.dg/allocated_3.f90
From-SVN: r275228
Backport from trunk
2019-08-22 Segher Boessenkool <segher@kernel.crashing.org>
PR target/91481
* config/rs6000/rs6000.md (unspec): Delete UNSPEC_DARN, UNSPEC_DARN_32,
and UNSPEC_DARN_RAW.
(unspecv): New enumerator values UNSPECV_DARN, UNSPECV_DARN_32, and
UNSPECV_DARN_RAW.
(darn_32): Use an unspec_volatile, and UNSPECV_DARN_32.
(darn_raw): Use an unspec_volatile, and UNSPECV_DARN_RAW.
(darn): Use an unspec_volatile, and UNSPECV_DARN.
From-SVN: r275175
2019-08-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/91568
* tree-vectorizer.h (_slp_tree::max_nunits): Add.
(vect_update_max_nunits): Add overload for poly_uint64.
* tree-vect-slp.c (vect_create_new_slp_node): Initialize it.
(vect_build_slp_tree): Record max_nunits into the subtree
and merge it upwards.
(vect_print_slp_tree): Print max_nunits.
* gfortran.dg/pr91568.f: New testcase.
From-SVN: r275024
2019-08-28 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-05-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/90637
* tree-ssa-sink.c (statement_sink_location): Honor the
computed sink location for single-uses.
* gcc.dg/gomp/pr90637.c: New testcase.
From-SVN: r274989
Backport r274411 from trunk to gcc-9-branch
Backport r274411 of "Enable math functions linking with static library
for LTO" from mainline to gcc-9-branch.
Bootstrapped/Regression-tested on Linux POWER8 LE.
gcc/ChangeLog
2019-08-26 Xiong Hu Luo <luoxhu@linux.ibm.com>
Backport r274411 from trunk to gcc-9-branch.
2019-08-14 Xiong Hu Luo <luoxhu@linux.ibm.com>
PR lto/91287
* builtins.c (builtin_with_linkage_p): New function.
* builtins.h (builtin_with_linkage_p): New function.
* symtab.c (write_symbol): Remove redundant assert.
* lto-streamer-out.c (symtab_node::output_to_lto_symbol_table_p):
Remove FIXME and use builtin_with_linkage_p.
From-SVN: r274921
Building for i686-mingw32 target (with some local changes) produced an
error
error: ISO C++ forbids declaration of 'lstat' with no type [-fpermissive]
in libstdc++-v3/src/filesystem/ops-common.h. This patch adds the
missing return type. OK to commit (trunk and GCC 9 branch)?
Note 1: I haven't run the testsuite with this patch, but it fixes the
build failure I see (in sources with other local changes).
Note 2: I don't know why this hasn't produced build failures for other
people, but the missing return type looks wrong in any case even if
other local changes are for some reason needed for it to produce an
error.
* src/filesystem/ops-common.h [_GLIBCXX_FILESYSTEM_IS_WINDOWS]
(std::filesystem::__gnu_posix::lstat): Add return type.
From-SVN: r274886
* config/mips/mips.md (mips_get_fcsr, *mips_get_fcsr): Use SI
machine mode for unspec_volatile operand.
* gcc.target/mips/get-fcsr-3.c: New test.
From-SVN: r274864
2019-08-23 Martin Liska <mliska@suse.cz>
PR ipa/91508
Backport from mainline
2019-08-15 Martin Liska <mliska@suse.cz>
PR ipa/91438
* cgraph.c (cgraph_node::remove): When setting
n->origin = NULL for all nested functions, reset
also next_nested.
From-SVN: r274853
2019-08-23 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-08-15 Martin Liska <mliska@suse.cz>
PR ipa/91404
* passes.c (order): Remove.
(uid_hash_t): Likewise).
(remove_cgraph_node_from_order): Remove from set
of pointers (cgraph_node *).
(insert_cgraph_node_to_order): New.
(duplicate_cgraph_node_to_order): New.
(do_per_function_toporder): Register all 3 cgraph hooks.
Skip removed_nodes now as we know about all of them.
From-SVN: r274851
There is no reasonable chance that the SDKs in question will be re-
issued, so the only viable solution is a fixincludes.
2019-08-21 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-08-18 C.G. Dogan <gcc+cgdogan.00@gmail.com>
Iain Sandoe <iain@sandoe.co.uk>
PR target/83531
* inclhack.def (darwin_api_availability): New; strip leading
underscores from API_XXXX defines.
* fixincl.x: Regenerate.
* tests/base/os/availability.h: New file.
From-SVN: r274807
This test needs the cpu and machine asserts to be implemented
which hadn't been done for PPC Darwin.
2019-08-21 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-08-18 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (TARGET_OS_CPP_BUILTINS): Add asserts
for cpu and machine. Factor 64/32b builtins.
From-SVN: r274806
These new (non-parallel) algorithms were added to C++17 along with the
parallel algorithms, but were missing from libstdc++.
Backported for PR libstdc++/91495, replacing the use of
std::__size_to_integer which is not present on the branch.
Backport from mainline
2019-06-19 Jonathan Wakely <jwakely@redhat.com>
* include/std/numeric (reduce(Iter, Iter, T, BinOp)): Fix value
category used in invocable check.
(reduce(Iter, Iter, T)): Pass initial value as rvalue.
* testsuite/26_numerics/reduce/2.cc: New test.
Backport from mainline
2019-06-18 Jonathan Wakely <jwakely@redhat.com>
* include/bits/algorithmfwd.h: Change title of doc group.
* include/bits/stl_algo.h (for_each_n): Add new C++17 algorithm from
P0024R2.
* include/bits/stl_numeric.h: Define doc group and add algos to it.
* include/std/numeric (__is_random_access_iter): New internal trait.
(reduce, transform_reduce, exclusive_scan, inclusive_scan)
(transform_exclusive_scan, transform_inclusive_scan): Likewise.
* testsuite/25_algorithms/for_each/for_each_n.cc: New test.
* testsuite/26_numerics/exclusive_scan/1.cc: New test.
* testsuite/26_numerics/inclusive_scan/1.cc: New test.
* testsuite/26_numerics/reduce/1.cc: New test.
* testsuite/26_numerics/transform_exclusive_scan/1.cc: New test.
* testsuite/26_numerics/transform_inclusive_scan/1.cc: New test.
* testsuite/26_numerics/transform_reduce/1.cc: New test.
* testsuite/util/testsuite_iterators.h (test_container::size()): New
member function.
From-SVN: r274754
PR target/91386 is a situation where a peephole2 pattern substitution
is discarded late because the selected instructions contain
frame-related notes that we cannot redistribute (because the pattern
has more than one insn in the output). Unfortunately, the original
insns were being modified during the generation, so after the undo we
are left with corrupt RTL.
We avoid this by ensuring that the modifications are always made on a
copy, so that the original insns are never changed.
Backport from mainline
2019-09-09 Richard Earnshaw <rearnsha@arm.com>
PR target/91386
* config/aarch64/aarch64.c (aarch64_gen_adjusted_ldpstp): Use copy_rtx
to preserve the contents of the original insns.
From-SVN: r274675
2019-08-18 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91485
module.c (gfc_match_use): User defined operator cannot conflict with
a rename symbol.
2019-08-18 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91485
* gfortran.dg/pr91485.f90: New test.
From-SVN: r274632
For some Darwin versions the absence of the rethrow_primary_exception
symbol causes almost all sanitizer tests to fail.
The symbol is not present in libstdc++ and, therefore is is correct to
remove the reference to it for all platforms. We do this by adding a
new guard "ASAN_HAS_CXA_RETHROW_PRIMARY_EXCEPTION".
For the backported version, to avoid bumping the library version, this
is only applied for Darwin (because of the way that symbol interposing
works on Darwin, this does not alter the exported symbols list).
libsanitizer/
2019-08-18 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-18 Iain Sandoe <iain@sandoe.co.uk>
PR libsanitizer/87880
* asan/asan_interceptors.h:
(ASAN_INTERCEPT___CXA_RETHROW_PRIMARY_EXCEPTION): New.
* asan/Makefile.am (DEFS): Add (for Darwin only)
ASAN_HAS_CXA_RETHROW_PRIMARY_EXCEPTION, defined to 0.
* asan/Makefile.in: Regenerated.
From-SVN: r274625
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91471
* primary.c (gfc_variable_attr): Remove a gfc_internal_error(),
which cannot be reached by conforming Fortran code, but seems to
be reachable from nonconforming Fortran code. Treat the AR_UNKNOWN
case as a no-op.
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91471
* gfortran.dg/pr91471.f90: New test.
From-SVN: r274612
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/78739
* match.c (gfc_match_st_function): When matching a statement function,
need to check if the statement function name shadows the function
name.
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/78739
* fortran.dg/pr78739.f90: New test.
From-SVN: r274611
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/78719
* decl.c (get_proc_name): Check for a CLASS entity when trying to
add attributes to an entity that already has an explicit interface.
2019-08-17 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/78719
* gfortran.dg/pr78719_1.f90: New test.
* gfortran.dg/pr78719_2.f90: Ditto.
* gfortran.dg/pr78719_3.f90: Ditto.
From-SVN: r274610
I fixed the DR 1560 implementation properly for GCC 10, but for GCC 9 feel
that it's better not to change the meaning of well-formed code. Reverting
the incomplete implementation fixes the ICEs.
* call.c (build_conditional_expr_1): Revert changes from
PR c++/64372 and c++/86205.
From-SVN: r274597
* call.c (null_ptr_cst_p): Update quote from the standard.
* decl.c (check_default_argument): Don't return nullptr when the arg
has side-effects.
* g++.dg/cpp0x/nullptr42.C: New test.
From-SVN: r274546
* typeck.c (cp_build_binary_op): Use same_type_p instead of comparing
the types directly.
* g++.dg/warn/Wsign-conversion-5.C: New test.
From-SVN: r274545
* parser.c (cp_parser_constructor_declarator_p): Handle the scenario
when a parameter declaration begins with [[attribute]].
* g++.dg/cpp0x/gen-attrs-68.C: New test.
* g++.dg/cpp0x/gen-attrs-69.C: New test.
From-SVN: r274544
The std::make_unique function wasn't added until C++14, and neither was
the std::complex_literals namespace.
gcc/cp:
PR c++/91436
* name-lookup.c (get_std_name_hint): Fix min_dialect field for
complex_literals and make_unique entries.
gcc/testsuite:
PR c++/91436
* g++.dg/lookup/missing-std-include-5.C: Limit test to C++14 and up.
* g++.dg/lookup/missing-std-include-6.C: Don't check make_unique in
test that runs for C++11.
* g++.dg/lookup/missing-std-include-8.C: Check make_unique here.
From-SVN: r274493
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/87991
* resolve.c (check_data_variable): data-stmt-object with pointer
attribute requires a data-stmt-value with the target attribute.
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/87991
* gfortran.dg/pr87991.f90: New test.
From-SVN: r274413
2013-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90563
* frontend-passes.c (insert_index): Suppress errors while
simplifying the resulting expression.
2013-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90563
* gfortran.dg/do_subsript_5.f90: New test.
From-SVN: r274405
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/88072
* misc.c (gfc_typename): Do not point to something that ought not to
be pointed at.
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/88072
* gfortran.dg/pr88072.f90: New test.
* gfortran.dg/unlimited_polymorphic_28.f90: Fix error message.
From-SVN: r274401
2019-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90561
* trans.h (gfc_evaluate_now_function_scope): New function.
* trans.c (gfc_evaluate_now_function_scope): New function.
* trans-expr.c (gfc_trans_assignment): Use it.
2019-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90561
* gfortran.dg/deferred_character_34.f90: New test.
From-SVN: r274398
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/89647
resolve.c (resolve_typebound_procedure): Allow host associated
procedure to be a binding target. While here, wrap long line.
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/89647
* gfortran.dg/pr89647.f90: New test.
From-SVN: r274395
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/87993
* expr.c (gfc_simplify_expr): Simplifcation of an array with a kind
type inquiry suffix yields a constant expression.
2019-08-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/87993
* gfortran.dg/pr87993.f90: New test.
From-SVN: r274390
The src/c++17/string-inst.cc file needs to override the default string
ABI so that it still contains the expected symbols even when the library
is configured with --with-default-libstdcxx-abi=gcc4-compatible.
Backport from mainline
2019-08-12 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90361
* src/c++17/string-inst.cc: Use _GLIBCXX_USE_CXX11_ABI=1 by default.
From-SVN: r274379
2019-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91424
* frontend-passes.c (do_subscript): Do not warn for an
expression a second time. Do not warn about a zero-trip loop.
(doloop_warn): Also look at contained namespaces.
2019-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91424
* gfortran.dg/do_subscript_3.f90: New test.
* gfortran.dg/do_subscript_4.f90: New test.
* gfortran.dg/pr70754.f90: Use indices that to not overflow.
2019-08-13 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/91422
* testsuite/libgomp.oacc-fortran/routine-7.f90: Correct array
dimension.
From-SVN: r274369
As part of PR 91414 an improved PRNG was contributed to trunk. This is
a partial backport of some related changes to the PRNG. Namely when
seeding the PRNG, it needs only 8 bytes of randomness from the OS, and
uses a simple splitmix64 PRNG to fill in the rest of the state,
instead of getting all the state from the OS. This can be useful for
operating systems that can run out of entropy.
libgfortran/ChangeLog:
2019-08-13 Janne Blomqvist <jb@gcc.gnu.org>
Partial backport from trunk
PR fortran/91414
* intrinsics/random.c (lcg_parkmiller): Replace with splitmix64.
(splitmix64): New function.
(getosrandom): Fix return value, simplify.
(init_rand_state): Use getosrandom only to get 8 bytes, splitmix64
to fill rest of state.
From-SVN: r274362
2019-08-12 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91359
* trans-decl.c (gfc_generate_return): Ensure something is returned
from a function.
2019-08-12 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91359
* gfortran.dg/pr91359_1.f: New test.
* gfortran.dg/pr91359_2.f: Ditto.
From-SVN: r274319
This patch fixes PR c++/88095: class nontype template parameter UDL string
literals doesn't accepts deduction placeholder
It also addresses a latent issue; literal operator templates with template
parameter packs of literal class type were previously accepted. The patch
corrects this and adds a test (udlit-class-nttp-neg.C).
This fix is needed for one of the char8_t remediation approaches documented
in P1423, and may be helpful for existing code bases impacted by the char8_t
changes adopted via P0482 for C++20.
gcc/cp/ChangeLog:
2019-08-02 Tom Honermann <tom@honermann.net>
* parser.c (cp_parser_template_declaration_after_parameters): Enable
class template argument deduction for non-type template parameters
in literal operator templates.
gcc/testsuite/ChangeLog:
2019-08-02 Tom Honermann <tom@honermann.net>
PR c++/88095
* g++.dg/cpp2a/udlit-class-nttp-ctad.C: New test.
* g++.dg/cpp2a/udlit-class-nttp-ctad-neg.C: New test.
* g++.dg/cpp2a/udlit-class-nttp-ctad-neg2.C: New test.
* g++.dg/cpp2a/udlit-class-nttp.C: New test.
* g++.dg/cpp2a/udlit-class-nttp-neg.C: New test.
* g++.dg/cpp2a/udlit-class-nttp-neg2.C: New test.
From-SVN: r274317
Here, since the call to g is not type-dependent, we call mark_used on it to
determine its return type. This also wants to instantiate the
noexcept-expression. But since nothing in maybe_instantiate_noexcept was
calling push_to_top_level, we substituted b.i with processing_template_decl
set, so we left it unresolved for later access checking. As a result, the
type of C::g<int> remained instantiation-dependent, leading to an ICE in
type_dependent_expression_p on the assert that the type of a function
template with no dependent template arguments must be non-dependent.
* pt.c (maybe_instantiate_noexcept): push_to_top_level.
From-SVN: r274316
Previously, with init-capture the type of the closure field was a
DECLTYPE_TYPE of the initializer. But since each time we tsubst a lambda we
get a different lambda, that meant that if the initializer is a lambda, we'd
end up with different closure types in the field and initializer after
substitution (PR 87322). We dealt with this by remembering the lambda
instantiation within each pack expansion element, using
local_specialization_stack to separate the elements. But that broke this
testcase, because it lost lambda capture proxies that also use
local_specializations.
So, this patch removes the local_specializations changes from that patch and
fixes 87322 differently, by giving init-capture fields 'auto' type and doing
deduction later. There's a bit of a kludge to get the right number of
fields by pretending that 'auto...' uses the parameter packs from the
initializer, but it does the trick.
* cp-tree.h (DECLTYPE_FOR_INIT_CAPTURE): Remove.
* lambda.c (add_capture): Copy parameter packs from init.
(lambda_capture_field_type): Always use auto for init-capture.
* pt.c (uses_parameter_packs): Return tree.
(tsubst) [DECLTYPE_TYPE]: Remove init-capture handling.
(gen_elem_of_pack_expansion_instantiation): Don't push
local_specialization_stack.
(prepend_one_capture): New.
(tsubst_lambda_expr): Use it. Don't touch local_specializations.
(do_auto_deduction): Avoid redundant error.
From-SVN: r274315
On PPC, Darwin uses the same code as other parts of the port.
2019-08-05 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-02 Iain Sandoe <iain@sandoe.co.uk>
* libgnat/system-darwin-ppc.ads: Set Stack_Check_Probes True for
PPC Darwin.
From-SVN: r274111
Gnatlink has code that checks for duplicate '-shared-libgcc’ switches (but not
duplicate ‘static-libgcc’) and also pushes ’static-libgcc' onto the link line for
targets that default to static linking, provided '-shared-libgcc' is not present.
For targets that should use a shared libgcc we need the same process to be
applied (in inverse), in the event that they do not default to providing the
shared flag implicitly.
So this adds the complementary set of tests for the shared case and pushes
the shared flag as needed. As a minor tidy-up there’s no need push duplicates
of the libgcc switch onto the link line when one has already been seen (given by
the user).
The patch does not alter any of the platform defaults for static/shared libgcc,
but it ensures that the intent of the link is explicit.
2019-08-05 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-30 Iain Sandoe <iain@sandoe.co.uk>
* gnatlink.adb (Link_Step): Remove duplicate -static-libgcc switches.
Push -shared-libgcc explicitly, when it is the target default (unless
overidden by the static flag).
When the user has put an instance of shared/static-libgcc do not push
a duplicate of this.
From-SVN: r274110
- argument and return value for libcall won't promote at
default_promote_function_mode_always_promote, however we expect it
should sign-extend as normal function.
- Witout this patch, this test case will fail at -march=rv64i -mabi=lp64.
- The implementation of riscv_promote_function_mode is borrowed from MIPS.
gcc/ChangeLog
Backport from mainline
2019-08-05 Kito Cheng <kito.cheng@sifive.com>
* config/riscv/riscv.c (riscv_promote_function_mode): New.
(TARGET_PROMOTE_FUNCTION_MODE): Use riscv_promote_function_mode.
gcc/testsuite/ChangeLog
Backport from mainline
2019-08-05 Kito Cheng <kito.cheng@sifive.com>
* gcc.target/riscv/promote-type-for-libcall.c: New.
From-SVN: r274108
rev 266496 (git ab6b1bb456) undefined some macros in rs6000/freebsd.h
but missed doing the same in rs6000/freebsd64.h.
PR target/91349
* config/rs6000/freebsd64.h (CPLUSPLUS_CPP_SPEC),
(LINK_GCC_C_SEQUENCE_SPEC): Undef.
From-SVN: r274106
2019-08-04 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Backport from trunk
PR fortran/87233
* expr.c (check_restricted): Relax constraint C1279 which was
removed from F2008 and above.
* gfortran.dg/initialization_14.f90: Modify to now pass by
removing two dg-error commands. Added comments.
* gfortran.dg/initialization_30.f90: New test that includes the
two tests removed above with the 'dg-options -std=f95'.
From-SVN: r274104
Since we cannot parse the current NeXT headers, because of PR90709 and its
dependents, we have a large amount of testsuite noise for Darwin platforms.
In order to restore the usefulness of the testsuite, we are going add headers
without the modern syntax elements that trigger the bug, and use these for
test runs on newer Darwin.
The headers are imported from GNUStep, with some local modifications to make
sure that __BLOCKS__ is honoured as a gate for Apple-style blocks closures.
CF-CFString.h, F-NS*.h are proxy headers that use the installed CoreFoundation
or Foundation headers on systems <= Darwin12 and the GNUStep headers for newer.
Use the CF-CFString.h, F-NS*.h proxy headers where needed in the objective-c
testsuite. Make minor adjustments to tests as required, providing that those
do not alter the test intent.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-15 Iain Sandoe <iain@sandoe.co.uk>
PR objc/90709
* obj-c++.dg/proto-lossage-7.mm: Use proxy headers.
* obj-c++.dg/strings/const-cfstring-2.mm: Likewise.
* obj-c++.dg/strings/const-cfstring-5.mm: Likewise
* obj-c++.dg/strings/const-str-12.mm: Likewise.
* obj-c++.dg/syntax-error-1.mm: Likewise.
* obj-c++.dg/torture/strings/const-cfstring-1.mm: Likewise.
* obj-c++.dg/torture/strings/const-str-10.mm: Likewise.
* obj-c++.dg/torture/strings/const-str-11.mm: Likewise.
* obj-c++.dg/torture/strings/const-str-9.mm: Likewise.
* obj-c++.dg/cxx-ivars-3.mm: Skip on later Darwin, where the 10.4 API
in no longer supported, also on m64 where there's no meaning to it.
* obj-c++.dg/isa-field-1.mm: Suppress unwanted warning, add comment why.
* obj-c++.dg/objc-gc-3.mm: Skip for Darwin > 16, the API use is an error
there.
* obj-c++.dg/qual-types-1.mm: Prune a spurious l64 warning.
* obj-c++.dg/stubify-1.mm: Tidy up after better compiler warnings.
* obj-c++.dg/stubify-2.mm: Likewise.
* obj-c++.dg/try-catch-1.mm: Likewise.
* obj-c++.dg/try-catch-3.mm: Likewise.
Backport from mainline.
2019-06-15 Iain Sandoe <iain@sandoe.co.uk>
PR objc/90709
* objc.dg/encode-7-next-64bit.m: Use proxy headers.
* objc.dg/image-info.m: Likewise.
* objc.dg/method-6.m: Likewise.
* objc.dg/no-extra-load.m: Likewise.
* objc.dg/objc-foreach-4.m: Likewise.
* objc.dg/objc-foreach-5.m: Likewise.
* objc.dg/proto-lossage-7.m: Likewise.
* objc.dg/strings/const-cfstring-2.m: Likewise.
* objc.dg/strings/const-cfstring-5.m: Likewise.
* objc.dg/strings/const-str-12b.m: Likewise.
* objc.dg/symtab-1.m: Likewise.
* objc.dg/torture/strings/const-cfstring-1.m: Likewise.
* objc.dg/torture/strings/const-str-10.m: Likewise.
* objc.dg/torture/strings/const-str-11.m: Likewise.
* objc.dg/torture/strings/const-str-9.m: Likewise.
* objc.dg/zero-link-1.m: Likewise.
* objc.dg/zero-link-2.m: Likewise.
* objc.dg/zero-link-3.m: Likewise.
* objc.dg/isa-field-1.m: Suppress unwanted warning, add comment why.
* objc.dg/headers.m: XFAIL for Darwin14-19.
* objc.dg/objc-gc-4.m: Skip for Darwin > 16, the API use is an error
there.
Backport from mainline.
2019-06-15 Iain Sandoe <iain@sandoe.co.uk>
PR objc/90709
* objc-obj-c++-shared/CF-CFString.h: New.
* objc-obj-c++-shared/F-NSArray.h: New.
* objc-obj-c++-shared/F-NSAutoreleasePool.h: New.
* objc-obj-c++-shared/F-NSObject.h: New.
* objc-obj-c++-shared/F-NSString.h: New.
* objc-obj-c++-shared/F-NSValue.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFArray.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFAvailability.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFBase.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFCharacterSet.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFData.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFDictionary.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFLocale.h: New.
* objc-obj-c++-shared/GNUStep/CoreFoundation/CFString.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSArray.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSAutoreleasePool.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSDate.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSEnumerator.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSGeometry.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSObjCRuntime.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSObject.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSRange.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSString.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSValue.h: New.
* objc-obj-c++-shared/GNUStep/Foundation/NSZone.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/GNUstep.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/GSBlocks.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/GSConfig.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/GSObjCRuntime.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/GSVersionMacros.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/NSArray+GNUstepBase.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/NSMutableString+GNUstepBase.h:
New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/NSNumber+GNUstepBase.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/NSObject+GNUstepBase.h: New.
* objc-obj-c++-shared/GNUStep/GNUstepBase/NSString+GNUstepBase.h: New.
From-SVN: r274095
This test is failing with older cpus because the included header needs both
altivec and vsx to be enabled to succeed in compiling. Without this (if these
are not defaults for the cpu) there are errors like:
In file included from ... x86intrin.h:41,
from ... bmi2-bzhi64-1a.c:6:
... xmmintrin.h: In function '_mm_loadu_ps':
... xmmintrin.h:122:11:
error: incompatible types when returning type 'int' but '__m128' {aka '__vector(4) float'} was expected
<snip>
... xmmintrin.h: In function '_mm_cvtps_pi32':
... xmmintrin.h:996:3:
error: use of 'long long' in AltiVec types is invalid without '-mvsx'
<snip>
Fixed by adding -maltivec -mvsx to the options
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-27 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/bmi2-bzhi64-1a.c: Add options to enable altivec
and vsx.
From-SVN: r274093
The testcase is failing to instrument part of the source because of a bug
in the ordering of static DTORs. It seems unlikely that this is generically
fixable in the toolchain (and given that it's likely to be a dynamic loader
change would not be expected to be applied retrospectively to OS versions
that are out of support). To avoid the testsuite noise, xfail the count lines
that don't match (we can adjust the xfails as/when the upstream bug is fixed).
dejagnu xfails do not seem to work when embedded in a line like:
~Test (void) { .... /* count(1) { xfail ... } */ }
the closing brace seems to confuse the parser. The solution is to exapnd the
text onto three lines.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-25 Iain Sandoe <iain@sandoe.co.uk>
PR gcov-profile/91087
* g++.dg/gcov/pr16855.C: Xfail the count lines for the DTORs and the
"final" line for the failure summaries. Adjust source layout so that
dejagnu xfail expressions work.
From-SVN: r274092
This test requires stabs support in the assembler so require it.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-13 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/stabs-attrib-vect-darwin.c: Require stabs
support.
From-SVN: r274091
During GCC-9, the codegen for unreachable switch case statements changed
such that the (undefined) behaviour of reaching such statements is directed
to one of the existing switch cases. This means that the testcase which
deals with the old behaviour can no longer work (and there is nothing to test
with it). The [Darwin-specific] test is now redundant and can be removed.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-07-12 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/pr57438-2.c: Remove.
From-SVN: r274090
The -mno-speculate-indirect-jumps functionality is not implemented for
Darwin.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-24 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/safe-indirect-jump-1.c: Skip for Darwin.
* gcc.target/powerpc/safe-indirect-jump-7.c: Likewise.
From-SVN: r274088
For the test to succeed there needs to be some header that is to be found in
the 'expected' place i.e. <sysroot>/usr/include/. It's important that it is
not the name of a header for which fixincludes have been applied, since such
headers will be found in the gcc include-fixed dir and, in general, reference
additional headers. The dummy sysroot will prevent the additional headers
from being found, resulting in a failed test. The fix is to use a header name
that isn't expected to be present in a real sysroot.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-24 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/cpp/isysroot-1.c: Use <example.h> as the test header.
* gcc.dg/cpp/usr/include/stdio.h: Rename...
* gcc.dg/cpp/usr/include/example.h: ... to this.
From-SVN: r274086
This cannot pass for current Darwin, since it requires VSX and we
don't have any hardware supporting that. Add a dg-requires clause
for this.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/builtins-2.c: Require VSX hardware support.
From-SVN: r274085
Darwin (unlike most of the members of the PowerPC port family)
defaults to signed chars, so the test was failing to compile with
a "mismatched parameters" error.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/pr80125.c (foo): Use an unsigned char
vector explicitly for the vec_perm.
From-SVN: r274084
This needs to account for Darwin's __USER_LABEL_PREFIX__.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/builtins-1.c: Account for Darwin's use of
__USER_LABEL_PREFIX__.
From-SVN: r274083
Firstly, we adjust the test conditions to use non-PIC code for Darwin.
Secondly, we have to account for out-of-line GPR restores which gives
a false positive on one of the scan-assembler-not. Lastly, we make the
test a bit more specific for Darwin - that it looks for absence of
branches to local labels.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/pr71785.c: For Darwin, make test non-PIC,
expect the out-of-line GPR restore, and test specifically for
absence of branches to local labels.
From-SVN: r274082
The two tests use decimal floating point, add the relevant dg-requires
so that they are unsupported on platforms without DFP.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-22 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/pr64205.c: Require effective target dfp.
* gcc.target/powerpc/pr79909.c: Likewise.
From-SVN: r274081
This test is failing because of a pedantic warning that is unrelated to the
purpose of the test. Fixed by suppressing that warning
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-22 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/powerpc/darwin-bool-1.c: Suppress the pedantic
warning about _Bool.
From-SVN: r274080
This test fails for Darwin m32 because it's scanning for absence
of an instruction that's validly used in PIC code. Fixed, in this
case, by using non-PIC codegen.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-13 Iain Sandoe <iain@sandoe.co.uk>
* g++.dg/pr71694.C: Use non-PIC codegen for Darwin m32.
From-SVN: r274079
Newer OS versions (10.14+) do not provide some of the CRTs that are used
for older ones (e.g. 10.5), and thus link tests that specify targeting
such a revision fail. We retain the testing of the correct defined OS
version number but switch to compile-only testing for these two tests.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-13 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/darwin-minversion-1.c: Use compile rather than link/run.
* gcc.dg/darwin-minversion-2.c: Likewise.
From-SVN: r274078
This test currently fails on Darwin, because the port inlines fn2 for
both PIC (and non-pic for m32). Fixed by adjusting the target condition.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-11 Iain Sandoe <iain@sandoe.co.uk>
PR testsuite/65364
* gcc.dg/uninit-19.c (fn1): Adjust target condition for Darwin.
(fn2): Likewise.
From-SVN: r274076
Darwin produces aligned zerofill directives for the objects represented.
We can scan for these using lp64 and ilp32 to catch operation on both
X86 and PowerPC ports (the test is for the alignment which is the trailing
value in the zerofill directive, as a power of two).
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-06 Iain Sandoe <iain@sandoe.co.uk>
* g++.dg/cpp0x/alignas4.C: Amend test to check for zerofill syntax
on Darwin.
From-SVN: r274074
We don't have support for -mcmodel={medium, large, kernel} so don't
expect tests for those things to work.
For now mark them as xfail where possible and skip where that isn't.
These changes will be logged onto the PR and therefore can be backed
out when the facility is implemented.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-01 Iain Sandoe <iain@sandoe.co.uk>
PR target/90698
* gcc.target/i386/pr49866.c: XFAIL for Darwin.
* gcc.target/i386/pr63538.c: Likewise.
* gcc.target/i386/pr61599-1.c: Skip for Darwin.
From-SVN: r274073
Darwin has a .align taking a power of 2 by default, so that some
tests expecting a byte count are failing.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-31 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/falign-functions-3.c: Adjust align syntax
and label for Darwin.
* gcc.target/i386/attr-aligned-2.c: Adjust align syntax for
Darwin.
From-SVN: r274071
Darwin has a .align taking a power of 2 by default, so that some
tests expecting a byte count are failing, fixed thus.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-27 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pr22076.c: Adjust options to
match codegen expected by the scan-asms.
From-SVN: r274069
Darwin requires PIC code in order to support PIE, amend the test scan-asms
to match this.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-26 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pr39013-1.c: Adjust scan-asms for PIE to
account for PIC code on Darwin.
* gcc.target/i386/pr39013-2.c: Likewise.
* gcc.target/i386/pr64317.c: Likewise.
From-SVN: r274068
This test fails on Darwin because the port has a different
spelling for popcnt.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-25 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pr59874-3.c: Use the spelling of popcnt
expected for Darwin.
From-SVN: r274067
Require alias support in a test using aliases.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-25 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pr82659-3.c: Require alias support.
From-SVN: r274066
Some of the i386.exp tests fail on Darwin (and at least one passes
incorrectly on Linux) because their scan-asm match strings are too
general. In some cases the strings also match instances in the .file
and size directives or in comment output. This patch makes the match
strings more specific.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-24 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pconfig-1.c: Scan for the string in the generated
code, not in comments or miscellaneous directives.
* gcc.target/i386/pr18041-1.c: Likewise.
* gcc.target/i386/pr18041-2.c: Likewise.
* gcc.target/i386/wbinvd-1.c: Likewise.
* gcc.target/i386/wbnoinvd-1.c: Likewise.
* gcc.target/i386/pr66819-3.c: Specifically, check that there is no
call to "bar".
* gcc.target/i386/pr66819-4.c: Likewise.
* gcc.target/i386/pr82662.c
* gcc.target/i386/ptwrite2.c: Make the checks look for the specific
destination register, don't try the m32 test on m64 targets.
From-SVN: r274065
more tests that failed on Darwin because of missing
__USER_LABEL_PREFIX__ matching.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-24 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/i386/pr67985-2.c: Adjust label checks for
Darwin.
* gcc.target/i386/pr77881.c: Likewise.
From-SVN: r274064
Although this is marked as rtl-optimisation, the Darwin
issue is that the testcase XPASS there since the codegen
is different.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-23 Iain Sandoe <iain@sandoe.co.uk>
PR rtl-optimisation/64895
* gcc.target/i386/fuse-caller-save-rec.c: Remove XFAILs.
* gcc.target/i386/fuse-caller-save.c: Likewise.
* gcc.target/i386/fuse-caller-save-xmm.c: Adjust tests for
PIC cases, remove XFAILs.
From-SVN: r274062
This can't pass on 32b power Darwin, since the ABI conflicts.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-22 Iain Sandoe <iain@sandoe.co.uk>
PR testsuite/27221
* g++.dg/ext/alignof2.C: XFAIL for 32bit Darwin.
From-SVN: r274061
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-20 Iain Sandoe <iain@sandoe.co.uk>
PR testsuite/58321
* gcc.target/i386/memcpy-strategy-3.c: Adjust count for Darwin and
add a comment as to the reason for the difference.
* gcc.target/i386/memset-strategy-1.c: Likewise.
From-SVN: r274058
This fixes a large number of test fails when we build PPC Darwin
with an LLVM-based assembler (that recognises the insns).
The patch augments the tests for feature support for VSX,
power8 and power9 to exclude Darwin even if the assembler can
handle the instructions.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-15 Iain Sandoe <iain@sandoe.co.uk>
* lib/target-supports.exp
(check_effective_target_powerpc_p8vector_ok): No support for Darwin.
(check_effective_target_powerpc_p9vector_ok): Likewise.
(check_effective_target_powerpc_float128_sw_ok): Likewise.
(check_effective_target_powerpc_float128_hw_ok): Likewise.
(check_effective_target_powerpc_vsx_ok): Likewise.
* gcc.target/powerpc/bfp/bfp.exp: Don't try to run this for Darwin.
* gcc.target/powerpc/dfp/dfp.exp: Likewise.
From-SVN: r274057
This test fails because it was expecting __powerpc__ to be
defined, where Darwin defines __POWERPC__.
2019-08-04 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-15 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/pr87600.h: Add __POWERPC__ as an alternate test
for PowerPC platforms.
From-SVN: r274056
This addresses a number of test fails that occur for the
NeXT runtime.
gcc/objc/
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-18 Iain Sandoe <iain@sandoe.co.uk>
* objc/objc-act.h (OCTI_INSTANCE_TYPE, OCTI_INSTANCETYPE_NAME): New.
(objc_global_trees): Add instance type and name.
(INSTANCE_TYPEDEF_NAME): New.
* objc/objc-act.c (synth_module_prologue): Build decls for
objc_instancetype_type and objc_instancetype_name.
gcc/testsuite/
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-18 Iain Sandoe <iain@sandoe.co.uk>
* objc.dg/instancetype-0.m: New.
From-SVN: r274050
273746 , 273749, 273768 [Darwin] Fix PR87030 and tidy config fragments.
This is about 32/64b host and multilib support across the range of Darwin
systems.
Prior to Darwin8 (OS X 10.4), the toolchains support only PowerPC and only 32b.
On Darwin8 it is possible to target a 64b multilib, but with support limited
to a few of the main libraries on the system (not a recommended configuration).
From Darwin9 to Darwin17 (OSX 10.5 to 10.13) it is possible to have either
32 or 64b hosted toolchains, with support for a 64 or 32b multilib respectively.
On Darwin9 the kernel is 32b, but with support for 64b executables, so it's
conventional to build a 32b host toolchain supporting a 64b multilib. However
this is not enforced (merely a convention).
There is also some platform hardware supporting Darwin10/11 which is only 32b
and for which the same situation applies. However, from Darwin10 to Darwin17,
the majority of platform hardware supports a 64b kernel and it's conventional
to build a 64b host toolchain with support for a 32b multilib.
On/from Darwin18 (OS X 10.14), the development headers (in the SDK) no longer
expose the interfaces for the 32b multilib support (although sufficient runtime
support remains installed that the testsuite can be run for a 32b multilib).
The PR is raised against this latter situation since the absence of exposed
interfaces causes a 'default' bootstrap fail regardless of the availability of
the runtimes. Given the number of permutations, I felt it warranted a general
solution, especially since the current scheme of target headers and t-make
fragments has become somewhat messy.
The changes here enforce the single 32b PowerPC multilib for Darwin < 8 and the
single X86 64b multilib for Darwin >= 18. This means that there is no longer
any need to configure Darwin18+ '--disable-multilib', but also that if you want
to use the ability to continue to test the compiler's 32b multilib there, you
need to make a configuration targeting an earlier OS version (and using the
SDK from that).
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-07-24 Iain Sandoe <iain@sandoe.co.uk>
PR bootstrap/87030
* config/i386/darwin.h (REAL_LIBGCC_SPEC): Revert change from r273749.
PR bootstrap/87030
* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move from here...
* config/i386/darwin32-biarch.h .. to here.
* config/i386/darwin64-biarch.h: Adjust comments.
* config/rs6000/darwin32-biarch.h: Likewise.
* config/rs6000/darwin64-biarch.h: Likewise.
* config.gcc: Missed commit from r273746
(*-*-darwin*): Don't include CPU t-darwin here.
(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
an error message if i686-darwin configuration is attempted for
Darwin >= 18.
Backport from mainline
2019-07-23 Iain Sandoe <iain@sandoe.co.uk>
PR bootstrap/87030
* config.gcc (*-*-darwin*): Don't include CPU t-darwin here.
(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
an error message if i686-darwin configuration is attempted for
Darwin >= 18.
(x86_64-*-darwin*): Switch to single multilib for Darwin >= 18.
(powerpc-*-darwin*): Use biarch files where needed.
(powerpc64-*-darwin*): Likewise.
* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move to new biarch file.
(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
arch case.
* config/i386/darwin32-biarch.h: New.
* config/i386/darwin64.h: Rename.
* gcc/config/i386/darwin64-biarch.h: To this.
* config/i386/t-darwin: Rename.
* gcc/config/i386/t-darwin32-biarch: To this.
* config/i386/t-darwin64: Rename.
* gcc/config/i386/t-darwin64-biarch: To this.
* config/rs6000/darwin32-biarch.h: New.
* config/rs6000/darwin64.h: Rename.
* config/rs6000/darwin64-biarch.h: To this.
(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
arch case.
* config/rs6000/t-darwin8: Rename.
* config/rs6000/t-darwin32-biarch: To this.
* config/rs6000/t-darwin64 Rename.
* config/rs6000/t-darwin64-biarch: To this.
From-SVN: r274049
Darwin only supports "static" code in the kernel and
kernel extensions. This check tries to prevent the case
that cascaded PIC/PIE options on the command line cause
non-pic to be selected.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-07-07 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_override_options): Make a final check on PIC
options.
From-SVN: r274048
It's not correct for all current Darwin versions to jam
symbol stubs on for kexts.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-07-07 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_override_options): Don't jam symbol stubs
on for kernel code.
From-SVN: r274047
Several port tests use headers that Darwin has not been
installing. This removes the override on the header install
thus making Darwin's set match the reset of the port.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-28 Iain Sandoe <iain@sandoe.co.uk>
* config.gcc (powerpc-*-darwin*, powerpc64-*-darwin*): Remove
override on extra_headers.
From-SVN: r274046
This honours the users choice of float ABI in kexts.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-27 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/rs6000.c (darwin_rs6000_override_options): Honour
user-specified float mode choice for kernel mode code.
From-SVN: r274045
We should never have been using longcalls by default in
64b code.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-27 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/rs6000.c (darwin_rs6000_override_options): Do not
use longcall for 64b code.
From-SVN: r274044
When libgcc is built on Darwin, it is usually built for the earliest potential
target (Darwin8, 10.4). Build for that revision default to assuming that the
processor might be G3 (without vector ops) and there is an outlined function
used for save/restore that checks whether the processor is G3 or G4+ at run-
time. However, the unwinder itself needs to be built with the assumption of
vector usage so that the relevant outlined functions are called.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-06 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/t-darwin: Ensure that the unwinder is built with
altivec enabled.
From-SVN: r274043
Several tests expect support for the GCC target pragma.
Act on this for compatibility with the port.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h: Handle GCC target pragma.
From-SVN: r274042
Some tests expect upper case versions of the ppc/ppc64
macros, so bring Darwin into line with other port
members.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-23 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h: (__PPC__, __PPC64__): New.
From-SVN: r274041
Darwin has had long long functions for some considerable time and these are
exposed in Darwin8 and Darwin11+ headers. However, for some reason it was
elected to hide them behind __STRICT_ANSI__ and __STDC_VERSION__ on Darwin9
and Darwin10. This is a problem for G++/libstdc++ that expects the functions
to be available for strict ansi (-std=c++14, for example) and without
defining __STDC_VERSION__. The fix here follows the pattern used in
Darwin11+ headers where the functions may be explicitly hidden by defining
__DARWIN_NO_LONG_LONG.
This fixes the tr1 testsuite fails seen on Darwin9 and 10.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-21 Iain Sandoe <iain@sandoe.co.uk>
* inclhack.def: Replace the complex test using __STRICT_ANSI__ and
__STDC_VERSION__ with a test using __DARWIN_NO_LONG_LONG.
Ensure that the top level math.h uses <> to wrap included headers
rather than "".
* fixincl.x: Regenerated.
* tests/base/architecture/ppc/math.h: Update test to include the
__DARWIN_NO_LONG_LONG case.
From-SVN: r274040
There are two issues with the Darwin14 (SDK) headers in which unguarded
advanced syntax elements causes any code including these headers to fail.
2019-08-03 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-06-21 Iain Sandoe <iain@sandoe.co.uk>
* inclhack.def: Guard __has_attribute and __has_extension in
os/base.h.
Guard Apple blocks syntax in dispatch/object.h.
* fixincl.x: Regenerate.
* tests/base/dispatch/object.h: New file.
* tests/base/os/base.h: New file.
From-SVN: r274039
Backport from mainline
PR c/90737 - [8/9/10 Regression] inconsistent address of a local converted to intptr_t between callee and caller
gcc/c/ChangeLog:
PR c/90737
* c-typeck.c (c_finish_return): Only consider functions returning
pointers as candidates for -Wreturn-local-addr.
gcc/cp/ChangeLog:
PR c/90737
* typeck.c (maybe_warn_about_returning_address_of_local): Only
consider functions returning pointers as candidates for
-Wreturn-local-addr.
gcc/testsuite/ChangeLog:
PR c/90737
* c-c++-common/Wreturn-local-addr.c: New test.
* g++.dg/warn/Wreturn-local-addr-6.C: New test.
From-SVN: r274022
Backport from mainline
PR tree-optimization/90989 - incorrrect strlen result after second strcpy
into the same destination
gcc/ChangeLog:
PR tree-optimization/90989
* tree-ssa-strlen.c (handle_char_store): Constrain a single character
optimization to just single character stores.
gcc/testsuite/ChangeLog:
PR tree-optimization/90989
* gcc.dg/strlenopt-26.c: Exit with test result status.
* gcc.dg/strlenopt-67.c: New test.
From-SVN: r274021
272260,r272479 - Darwin, Driver - Improve processing of macosx-version-min=
For PR target/63810 some improvements were made in the parsing of
the version string at the point it's used to define the built-in
__ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__. This is fine, but the
specs processing also uses the version, and specs version-compare
doesn't like leading zeros on components. This means that while we
succeed in processing -mmacosx-version-min=010.00002.000099 on compile
lines, it fails for any other line that uses the value as part of a spec
(in particular, link lines fail).
To fix this, we need to apply a bit of clean-up to the version that's
presented to the driver, and push that back into the command line opts.
The value can come from four places:
1. User-entered on the command line
2. User-entered as MACOSX_DEPLOYMENT_TARGET= environment var.
3. Absent those two
3a For self-hosting systems, look-up from the kernel
3b For cross-compilers, as a default supplied at configure time.
We apply the clean-up to all 4 (although it shouldn't really be needed
for the cases under 3).
We also supply a test-case that adapts to the target-version of the
system, so that the link requirements are met by the SDK in use (if you
try to link i686-darwin9 on an x86-64-darwin18 SDK, it will fail).
gcc/
2019-08-02 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-06-19 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (darwin_driver_init): Fix off-by-one errors
in computing the number of options to be moved.
Backport from mainline
2019-06-13 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-driver.c (validate_macosx_version_min): New.
(darwin_default_min_version): Cleanup and validate supplied version.
(darwin_driver_init): Likewise and push cleaned version into opts.
gcc/testsuite/
2019-08-02 Iain Sandoe <iain@sandoe.co.uk>
2019-06-13 Iain Sandoe <iain@sandoe.co.uk>
* gcc.dg/darwin-minversion-link.c: New test.
From-SVN: r274017
This fixes a number of testcases that expect use of
.p2align, which was omitted from the darwin X86 port
(but is available in all assemblers used with that).
2019-08-02 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-05-31 Iain Sandoe <iain@sandoe.co.uk>
* config/i386/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): New.
From-SVN: r274016
Don't try to prepend a sysroot for the gnu-objc headers, which
are compiler-relative.
Darwin is able to use two runtimes for objective-c; the
default is its native "NeXT" runtime, but also it can build
code using the "gnu-runtime". In order to do this, we have to
be able to find the gnu-runtime headers (which are installed
into the compiler's tree).
The process to do this is erroneously prepending the sysroot
to this when a sysroot is in force. The gnu-runtime headers have
never been installed in a Darwin (macOS) SDK so we must make
sure that they are found local to the compiler.
gcc/
2019-08-02 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-05-18 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin-c.c (darwin_register_objc_includes): Do not
prepend the sysroot when building gnu-runtime header search
paths.
From-SVN: r274015
gcc/
2019-08-02 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline
2019-05-18 Iain Sandoe <iain@sandoe.co.uk>
* config/darwin.c (darwin_file_end): Use switch_to_section ()
instead of direct output of the asm.
From-SVN: r274014
2019-08-02 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-07-31 Richard Biener <rguenther@suse.de>
PR tree-optimization/91280
* tree-ssa-structalias.c (get_constraint_for_component_ref):
Decompose MEM_REF manually for offset handling.
* g++.dg/torture/pr91280.C: New testcase.
2019-07-31 Richard Biener <rguenther@suse.de>
PR tree-optimization/91293
* tree-vect-slp.c (vect_build_slp_tree_2): Do not swap operands
of reduction stmts.
* gcc.dg/vect/pr91293-1.c: New testcase.
* gcc.dg/vect/pr91293-2.c: Likewise.
* gcc.dg/vect/pr91293-3.c: Likewise.
From-SVN: r274007
2019-08-02 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-07-31 Richard Biener <rguenther@suse.de>
PR tree-optimization/91178
* tree-ssa-sccvn.c (vn_reference_maybe_forwprop_address):
Use tail-recursion.
* gcc.dg/torture/pr91178-2.c: New testcase.
2019-07-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/91178
* tree-ssa.c (release_defs_bitset): Iterate from higher to
lower SSA names to avoid quadratic behavior in the common case.
* tree-data-ref.c (split_constant_offset): Add limit argument
and pass it down. Initialize it from PARAM_SSA_NAME_DEF_CHAIN_LIMIT.
(split_constant_offset_1): Add limit argument and use it to
limit SSA def walking. Optimize the common plus/minus case.
* gcc.dg/torture/pr91178.c: New testcase.
2019-07-12 Martin Sebor <msebor@redhat.com>
* doc/invoke.texi (ssa-name-def-chain-limit): Document new --param.
* params.def (PARAM_SSA_NAME_DEF_CHAIN_LIMIT): Add new --param.
* tree-vrp.c (vrp_prop::check_mem_ref): Use
PARAM_SSA_NAME_DEF_CHAIN_LIMIT.
* gcc.dg/Warray-bounds-43.c: New test.
From-SVN: r274000
Backported from mainline
2019-07-31 Jakub Jelinek <jakub@redhat.com>
PR c/91192
* c-parser.c (c_parser_sizeof_expression): Call set_c_expr_source_range
even if finish is UNKNOWN_LOCATION, just use start as finish in that
case.
From-SVN: r273967
Backported from mainline
2019-07-31 Jakub Jelinek <jakub@redhat.com>
PR middle-end/91301
* gimplify.c (gimplify_omp_for): If for class iterator on
distribute parallel for there is no data sharing clause
on inner_for_stmt, look for private clause on combined
parallel too and if found, move it to inner_for_stmt.
* testsuite/libgomp.c++/for-27.C: New test.
From-SVN: r273966
Backported from mainline
2019-07-30 Jakub Jelinek <jakub@redhat.com>
PR middle-end/91216
* omp-low.c (global_nonaddressable_vars): New variable.
(use_pointer_for_field): For global decls, if they are non-addressable,
remember it in the global_nonaddressable_vars bitmap, if they are
addressable and in the global_nonaddressable_vars bitmap, ignore their
TREE_ADDRESSABLE bit.
(omp_copy_decl_2): Clear TREE_ADDRESSABLE also on private copies of
vars in global_nonaddressable_vars bitmap.
(execute_lower_omp): Free global_nonaddressable_vars bitmap.
* gcc.dg/gomp/pr91216.c: New test.
From-SVN: r273965
Backported from mainline
2019-07-30 Jakub Jelinek <jakub@redhat.com>
PR target/91150
* config/i386/i386.c (expand_vec_perm_blend): Change mask type
from unsigned to unsigned HOST_WIDE_INT. For E_V64QImode cast
comparison to unsigned HOST_WIDE_INT before shifting it left.
* gcc.target/i386/avx512bw-pr91150.c: New test.
From-SVN: r273964
Backported from mainline
2019-07-17 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91157
* tree-vect-generic.c (expand_vector_comparison): Handle lhs being
a vector boolean with scalar mode.
(expand_vector_condition): Handle first operand being a vector boolean
with scalar mode.
(expand_vector_operations_1): For comparisons, don't bail out early
if the return type is vector boolean with scalar mode, but comparison
operand type is not.
* gcc.target/i386/avx512f-pr91157.c: New test.
* gcc.target/i386/avx512bw-pr91157.c: New test.
From-SVN: r273963
This patch makes the obvious fix for PR91135, and deletes extraneous
copies of GNU_USER_TARGET_D_OS_VERSIONS that appear in rs6000/linux.h
and rs6000/linux64.h. Since all configurations using either of these
files also include linux.h there is no need to duplicate the macro.
PR target/91135
* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Don't
define.
* config/rs6000/linux64.h (TARGET_OS_CPP_BUILTINS): Invoke
GNU_USER_TARGET_OS_CPP_BUILTINS for aixdesc abi.
(GNU_USER_TARGET_D_OS_VERSIONS): Don't define.
From-SVN: r273962
The <float.h> changes to define these for C++ have been backported, so
the test can use them now.
* testsuite/26_numerics/midpoint/floating.cc: Use standard macros
instead of GCC-specific ones.
From-SVN: r273950
Backport from mainline
2019-06-24 Jonathan Wakely <jwakely@redhat.com>
* ginclude/float.h (FLT_DECIMAL_DIG, DBL_DECIMAL_DIG, LDBL_DECIMAL_DIG)
(FLT_HAS_SUBNORM, DBL_HAS_SUBNORM, LDBL_HAS_SUBNORM, FLT_TRUE_MIN)
(DBL_TRUE_MIN, LDBL_TRUE_MIN): Also define for C++17.
Backport from mainline
2019-06-24 Jonathan Wakely <jwakely@redhat.com>
* testsuite/18_support/headers/cfloat/values_c++17.cc: New test.
From-SVN: r273949
Backport from mainline
2019-07-31 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/91308
* include/bits/unique_ptr.h (unique_ptr::__safe_conversion_up): Remove
constraints on deleter that should only apply to the constructor.
(unique_ptr<T[], D>::__safe_conversion_up): Likewise.
(unique_ptr<T[], D>::unique_ptr(unique_ptr<U, D>&&)): Restore
constraints on deleter here.
* testsuite/20_util/unique_ptr/assign/91308.cc: New test.
From-SVN: r273947
The recursive_init_error class is defined in a header, with an inline
constructor, but the definition of the vtable and destructor are not
exported from the shared library. With -fkeep-inline-functions the
constructor gets emitted in user code, and requires the (non-exported)
vtable. This fails to link.
As far as I can tell, the recursive_init_error class definition was
moved into <cxxabi.h> so it could be documented with Doxygen, not for
any technical reason. But now it's there (and documented), somebody
could be relying on it, by catching that type and possibly performing
derived-to-base conversions to the std::exception base class. So the
conservative fix is to leave the class definition in the header but make
the constructor non-inline. This still allows the type to be caught and
still defines its base class.
Backport from mainline
2019-07-29 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/51333
* libsupc++/cxxabi.h (__gnu_cxx::recursive_init_error): Do not define
constructor inline.
* libsupc++/guard_error.cc (__gnu_cxx::recursive_init_error): Define
constructor.
* testsuite/18_support/51333.cc: New test.
From-SVN: r273946
2019-07-31 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-07-19 Richard Biener <rguenther@suse.de>
PR tree-optimization/91200
* tree-ssa-phiopt.c (cond_store_replacement): Check we have
no PHI nodes in middle-bb.
* gcc.dg/torture/pr91200.c: New testcase.
2019-07-15 Richard Biener <rguenther@suse.de>
PR middle-end/91162
* tree-cfg.c (move_block_to_fn): When releasing a virtual PHI
node make sure to replace all uses with something valid.
* gcc.dg/autopar/pr91162.c: New testcase.
2019-07-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/91145
* tree-vect-slp.c (vect_build_slp_tree_2): Fix reduction
chain check.
* gcc.dg/torture/pr91145.c: New testcase.
2019-07-11 Richard Biener <rguenther@suse.de>
PR middle-end/91131
* gimplify.c (gimplify_compound_literal_expr): Force a temporary
when the object is volatile and we have not cleared it even though
there are no nonzero elements.
* gcc.target/i386/pr91131.c: New testcase.
2019-07-10 Richard Biener <rguenther@suse.de>
PR tree-optimization/91126
* tree-ssa-sccvn.c (n_walk_cb_data::push_partial_def): Adjust
native encoding offset for BYTES_BIG_ENDIAN.
(vn_reference_lookup_3): Likewise.
* gcc.dg/torture/pr91126.c: New testcase.
From-SVN: r273939
2019-07-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91296
* interface.c (compare_actual_expr): When checking for aliasing, add
a case to handle REF_INQUIRY (e.g., foo(x%re, x%im) do not alias).
2019-07-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91296
* gfortran.dg/pr91296.f90: New test.
From-SVN: r273916
2019-07-29 Thomas Koenig <tkoenig@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/90786
PR fortran/90813
* trans-expr.c (pointer_assignment_is_proc_pointer) Remove as
it is very simple and only called from one place.
(gfc_trans_pointer_assignment): Rename non_proc_pointer_assign
as non_proc_ptr_assign. Assign to it directly, rather than call
to above, deleted function and use gfc_expr_attr instead of
only checking the reference chain.
* dump-parse-tree.c (show_global_symbol): New function.
(gfc_dump_global_symbols): New function.
* gfortran.h (gfc_traverse_gsymbol): Add prototype.
(gfc_dump_global_symbols): Likewise.
* invoke.texi: Document -fdump-fortran-global.
* lang.opt: Add -fdump-fortran-global.
* parse.c (gfc_parse_file): Handle flag_dump_fortran_global.
* symbol.c (gfc_traverse_gsymbol): New function.
* trans-decl.c (sym_identifier): New function.
(mangled_identifier): New function, doing most of the work
of gfc_sym_mangled_identifier.
(gfc_sym_mangled_identifier): Use mangled_identifier. Add mangled
identifier to global symbol table.
(get_proc_pointer_decl): Use backend decl from global identifier
if present.
2019-07-29 Thomas Koenig <tkoenig@gcc.gnu.org>
Paul Thomas <pault@gcc.gnu.org>
Backport from trunk
PR fortran/90786
PR fortran/90813
* gfortran.dg/proc_ptr_51.f90: New test.
Co-Authored-By: Paul Thomas <pault@gcc.gnu.org>
From-SVN: r273913
Backport from mainline
2019-07-23 Jan Hubicka <hubicka@ucw.cz>
* i386-common.c: Use PROCESSOR_ZNVER2 scheduler for znver2.
* config/i386/znver1.md: Enable patterns for znver2 and add store
variants which use extra AGU unit.
From-SVN: r273904
Backport from mainline
2019-07-23 Jan Hubicka <hubicka@ucw.cz>
* config/i386/i386.c (ix86_option_override_internal): Default
PARAM_AVOID_FMA_MAX_BITS to 256 for znver2.
* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS): Set
for ZNVER2.
From-SVN: r273901
This macro was added as part of moving std::endian from <type_traits> to
<bit>.
Backport from mainline
2019-07-26 Jonathan Wakely <jwakely@redhat.com>
* include/std/bit (__cpp_lib_endian): Define.
* include/std/version (__cpp_lib_endian): Define.
* testsuite/26_numerics/endian/2.cc: New.
* testsuite/26_numerics/endian/3.cc: New.
* testsuite/26_numerics/endian/4.cc: New.
From-SVN: r273838
This change to an early C++2a feature was just approved (P1612R1).
Backport from mainline
2019-07-25 Jonathan Wakely <jwakely@redhat.com>
* include/std/bit (endian): Move definition here as per P1612R1.
* include/std/type_traits (endian): Remove definition from here.
* testsuite/20_util/endian/1.cc: Rename to ...
* testsuite/26_numerics/endian/1.cc: ... here. Adjust header.
From-SVN: r273837
This proposal has now been accepted for C++20, with a few changes. This
patch adjusts std::rotl and std::rotr to match the final specification
and declares the additions for C++2a mode even when __STRICT_ANSI__ is
defined.
Backport from mainline
2019-07-22 Jonathan Wakely <jwakely@redhat.com>
* include/std/bit (__rotl, __rotr): Change second parameter from
unsigned int to int and handle negative values.
(rotl, rotr): Remove check for __STRICT_ANSI__. Change second
parameter from unsigned int to int. Add nodiscard attribute.
* testsuite/26_numerics/bit/bitops.rot/rotl.cc: Rename to ...
* testsuite/26_numerics/bit/bit.rotate/rotl.cc: Here. Test negative
shifts.
* testsuite/26_numerics/bit/bitops.rot/rotr.cc: Rename to ...
* testsuite/26_numerics/bit/bit.rotate/rotr.cc: Here. Test negative
shifts.
From-SVN: r273836
Backport from mainline
2019-07-22 Jonathan Wakely <jwakely@redhat.com>
* include/std/bit (__ceil2): Make unrepresentable results undefined,
as per P1355R2. Add debug assertion. Perform one left shift, not two,
so that out of range values cause undefined behaviour. Ensure that
shift will still be undefined if left operand is promoted.
* testsuite/26_numerics/bit/bit.pow.two/ceil2.cc: Replace checks for
unrepresentable values with checks that they are not core constant
expressions.
* testsuite/26_numerics/bit/bit.pow.two/ceil2_neg.cc: New test.
From-SVN: r273835
C++20 concepts require parens around atomic constraints that are not
primary-expressions.
Backport from mainline
2019-07-16 Jason Merrill <jason@redhat.com>
* include/std/memory (uses_allocator_construction_args): Add parens
around constraint.
From-SVN: r273833
Clang seems to define built-ins that start with "__builtin_" as
non-keywords, which means that we need to use __has_builtin to detect
them, not __is_identifier. The built-ins that don't start with
"__builtin_" are keywords, and can only be detected using
__is_identifier and not by __has_builtin.
Backport from mainline
2019-07-02 Jonathan Wakely <jwakely@redhat.com>
* include/bits/c++config (_GLIBCXX_HAVE_BUILTIN_LAUNDER)
(_GLIBCXX_HAVE_BUILTIN_IS_CONSTANT_EVALUATED): Use __has_builtin
instead of __is_identifier to detect Clang support.
From-SVN: r273832
Backport from mainline
2019-05-23 Jonathan Wakely <jwakely@redhat.com>
* doc/xml/manual/status_cxx2017.xml: Add feature test macro for
P0040R3.
* doc/html/*: Regenerate.
From-SVN: r273831
Backport from mainline
2019-06-20 Jonathan Wakely <jwakely@redhat.com>
* doc/xml/manual/status_cxx2017.xml: Fix outdated reference to
C++17 working draft.
From-SVN: r273830
Backport from mainline
2019-07-18 Bin Cheng <bin.linux@linux.alibaba.com>
PR tree-optimization/91137
* tree-ssa-loop-ivopts.c (struct ivopts_data): New field.
(tree_ssa_iv_optimize_init, alloc_iv, tree_ssa_iv_optimize_finalize):
Init, use and fini the above new field.
(determine_base_object_1): New function.
(determine_base_object): Reimplement using walk_tree.
gcc/testsuite
2019-07-18 Bin Cheng <bin.linux@linux.alibaba.com>
PR tree-optimization/91137
* gcc.c-torture/execute/pr91137.c: New test.
From-SVN: r273754
PR rtl-optimization/91173
Backported from mainline
2019-07-16 Jeff Law <law@redhat.com>
PR rtl-optimization/91173
* tree-ssa-address.c (addr_for_mem_ref): If the base is an
SSA_NAME with a constant value, fold its value into the offset
and clear the base before calling gen_addr_rtx.
* g++.dg/pr91173.C: New test.
From-SVN: r273741
2019-07-23 Richard Biener <rguenther@suse.de>
PR debug/91231
* lto-streamer-in.c (input_function): Drop inline-entry markers
that ended up with an unknown location block.
From-SVN: r273734
2019-07-23 Thomas König <tkoenig@gcc.gnu.org>
Backport from trunk
PR libfortran/91030
* gfortran.texi (GFORTRAN_FORMATTED_BUFFER_SIZE): Document.
(GFORTRAN_UNFORMATTED_BUFFER_SIZE): Likewise.
2019-07-23 Thomas König <tkoenig@gcc.gnu.org>
Backport from trunk
PR libfortran/91030
* io/unix.c (BUFFER_SIZE): Delete.
(BUFFER_FORMATTED_SIZE_DEFAULT): New variable.
(BUFFER_UNFORMATTED_SIZE_DEFAULT): New variable.
(unix_stream): Add buffer_size.
(buf_read): Use s->buffer_size instead of BUFFER_SIZE.
(buf_write): Likewise.
(buf_init): Add argument unformatted. Handle block sizes
for unformatted vs. formatted, using defaults if provided.
(fd_to_stream): Add argument unformatted in call to buf_init.
* libgfortran.h (options_t): Add buffer_size_formatted and
buffer_size_unformatted.
* runtime/environ.c (variable_table): Add
GFORTRAN_UNFORMATTED_BUFFER_SIZE and
GFORTRAN_FORMATTED_BUFFER_SIZE.
From-SVN: r273727
Add compatibility implementations of _mm_blend_epi16 and _mm_blendv_epi8
intrinsics.
Respective test cases are copied almost verbatim (minor changes to
the dejagnu head lines) from i386.
2019-07-22 Paul A. Clarke <pc@us.ibm.com>
[gcc]
* config/rs6000/smmintrin.h (_mm_blend_epi16): New.
(_mm_blendv_epi8): New.
[gcc/testsuite]
* gcc.target/powerpc/sse4_1-check.h: New.
* gcc.target/powerpc/sse4_1-pblendvb.c: New.
* gcc.target/powerpc/sse4_1-pblendw.c: New.
* gcc.target/powerpc/sse4_1-pblendw-2.c: New.
From-SVN: r273704
2019-07-22 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-22 Martin Liska <mliska@suse.cz>
PR driver/91172
* opts-common.c (decode_cmdline_option): Decode
argument of -Werror and check it for a wrong language.
* opts-global.c (complain_wrong_lang): Remove such case.
2019-07-22 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-22 Martin Liska <mliska@suse.cz>
PR driver/91172
* gcc.dg/pr91172.c: New test.
From-SVN: r273664
This patch extends the fix for PR53633 to include static functions,
which were giving a bogus -Wreturn-type warning for C but not for C++.
2019-07-20 Richard Sandiford <richard.sandiford@arm.com>
gcc/c/
Backport from mainline
2019-07-18 Richard Sandiford <richard.sandiford@arm.com>
PR c/53633
* c-decl.c (finish_function): Check targetm.warn_func_return
before issuing a -Wreturn-type warning.
gcc/testsuite/
Backport from mainline
2019-07-18 Richard Sandiford <richard.sandiford@arm.com>
* c-c++-common/pr53633-2.c: New test.
From-SVN: r273635
For vector1 != vector2, we returned false if any elements were equal,
rather than if all elements were equal.
2019-07-20 Richard Sandiford <richard.sandiford@arm.com>
gcc/
Backport from mainline
2019-07-10 Richard Sandiford <richard.sandiford@arm.com>
* fold-const.c (fold_relational_const): Fix folding of
vector-to-scalar NE_EXPRs.
(test_vector_folding): Add more tests.
From-SVN: r273634
A non-type template parameter of class type used in an expression has
const-qualified type; the pt.c hunks deal with this difference from the
unqualified type of the parameter declaration. WAhen we use such a
parameter as an argument to another template, we don't want to confuse
things by copying it, we should pass it straight through. And we might as
well skip copying other classes in constant evaluation context in a
template, too; we'll get the copy semantics at instantiation time.
PR c++/90099
PR c++/90101
* call.c (build_converted_constant_expr_internal): Don't copy.
* pt.c (process_partial_specialization): Allow VIEW_CONVERT_EXPR
around class non-type parameter.
(unify) [TEMPLATE_PARM_INDEX]: Ignore cv-quals.
(invalid_nontype_parm_type_p): Check for dependent class type.
From-SVN: r273597
If a noexcept function calls a function that might throw, doing the tail
call optimization means that an exception thrown in the called function
will propagate out, breaking the noexcept specification. So we need to
prevent the optimization in that case.
* tree-tailcall.c (find_tail_calls): Don't turn a call from a
nothrow function to a might-throw function into a tail call.
From-SVN: r273594
Fixes github.com/riscv/riscv-gcc issue #161. We were accidentally using
BITS_PER_WORD to compute shift counts when we should have been using the
bitsize of the operand modes. This was wrong when we had an SImode shift
and a 64-bit target.
Andrew Waterman <andrew@sifive.com>
gcc/
* config/riscv/riscv.md (lshrsi3_zero_extend_3+1): Use operands[1]
bitsize instead of BITS_PER_WORD.
gcc/testsuite/
* gcc.target/riscv/shift-shift-2.c: Add one more test.
gcc/ChangeLog:
2019-07-18 Kito Cheng <kito.cheng@sifive.com>
Backport from mainline
2019-07-08 Andrew Waterman <andrew@sifive.com>
Jim Wilson <jimw@sifive.com>
* config/riscv/riscv.md (lshrsi3_zero_extend_3+1): Use operands[1]
bitsize instead of BITS_PER_WORD.
gcc/testsuite/
gcc/testsuite/ChangeLog:
2019-07-18 Kito Cheng <kito.cheng@sifive.com>
Backport from mainline
2019-07-08 Jim Wilson <jimw@sifive.com>
* gcc.target/riscv/shift-shift-2.c: Add one more test.
From-SVN: r273566
* config/pa/pa.c (pa_som_asm_init_sections): Don't force all constant
data into data section when generating PIC code.
(pa_select_section): Use pa_reloc_rw_mask() to qualify relocs.
(pa_reloc_rw_mask): Return 3 when generating PIC code and when
generating code for SOM targets earlier than HP-UX 11. Otherwise,
return 2 for SOM and 0 for other targets.
From-SVN: r273558
We currently use subst definitions to handle the different variants of shift
count operands. Unfortunately, in the vector shift pattern the shift count
operand is used directly. Without it being adjusted for the 'subst' variants the
displacement value is omitted resulting in a wrong shift count being applied.
This patch needs to be applied to older branches as well.
gcc/ChangeLog:
2019-07-17 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-07-01 Andreas Krebbel <krebbel@linux.ibm.com>
* config/s390/vector.md: Fix shift count operand printing.
gcc/testsuite/ChangeLog:
2019-07-17 Andreas Krebbel <krebbel@linux.ibm.com>
Backport from mainline
2019-07-01 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.target/s390/vector/vec-shift-2.c: New test.
From-SVN: r273546
Fix the alignment option parser to always allow up to 4 alignments.
Now -falign-functions=16:8:8:8 no longer reports an error.
gcc/
PR driver/90684
* gcc/opts.c (parse_and_check_align_values): Allow 4 alignment values.
From-SVN: r273533
Backported from mainline
2019-07-13 Jakub Jelinek <jakub@redhat.com>
PR c/91149
* c-omp.c (c_omp_split_clauses): Fix a pasto in
OMP_CLAUSE_REDUCTION_TASK handling.
* c-c++-common/gomp/reduction-task-3.c: New test.
From-SVN: r273478
Backported from mainline
2019-07-04 Jakub Jelinek <jakub@redhat.com>
PR middle-end/78884
* gimplify.c (struct gimplify_omp_ctx): Add add_safelen1 member.
(gimplify_bind_expr): If seeing TREE_ADDRESSABLE VLA inside of simd
loop body, set ctx->add_safelen1 instead of making it GOVD_PRIVATE.
(gimplify_adjust_omp_clauses): Add safelen (1) clause if
ctx->add_safelen1 is set.
* gcc.dg/gomp/pr78884.c: New test.
From-SVN: r273477
Backported from mainline
2019-07-04 Jakub Jelinek <jakub@redhat.com>
PR rtl-optimization/90756
* explow.c (promote_ssa_mode): Always use TYPE_MODE, don't bypass it
for VECTOR_TYPE_P.
* gcc.dg/pr90756.c: New test.
From-SVN: r273476
The gcc.c-torture/execute/builtins/lib directory contains a reimplementation
of many C library string functions, which causes non-trivial register allocation
bugs with LTO and static linked libraries. To fix this long-standing test issue,
turn off ipa-ra which avoids the register corruption across calls. All builtin
torture tests now pass on aarch64-none-elf. Committed as obvious.
See PR78529 for more details.
testsuite/
PR testsuite/78529
* gcc.c-torture/execute/builtins/builtins.exp: Add -fno-ipa-ra.
From-SVN: r273452
2019-07-12 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-07-04 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/91063
* tree-vect-stmts.c (vect_init_vector): Call gsi_remove to remove
stmt from stmts sequence before calling vect_init_vector_1.
Formatting fix.
* gcc.dg/gomp/pr91063.c: New test.
2019-07-04 Richard Biener <rguenther@suse.de>
PR ipa/91062
* tree-pass.h (execute_all_ipa_transforms): Add a flag
parameter whether to disable GC collection.
* passes.c (execute_one_ipa_transform_pass): Likewise, and
honor it.
(execute_all_ipa_transforms): Likewise and pass it down.
* cgraph.c (cgraph_node::get_body): Do not invoke garbage
collection from applying IPA transforms.
* cgraphunit.c (cgraph_node::expand): Allow garbage collection
from applying IPA transforms.
2019-06-27 Richard Biener <rguenther@suse.de>
PR testsuite/91004
* g++.dg/torture/pr34850.C: Fix overly reduced testcase.
2019-06-26 Richard Biener <rguenther@suse.de>
PR ipa/90982
* tree-inline.c (remap_ssa_name): Copy SSA range info.
* g++.dg/torture/pr90982.C: New testcase.
2019-06-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/90972
* tree-vect-stmts.c (vect_init_vector): Handle CONSTANT_CLASS_P
in common code, dealing with STRING_CST properly.
* gcc.dg/torture/pr90972.c: New testcase.
2019-06-21 Richard Biener <rguenther@suse.de>
PR debug/90914
* dwarf2out.c (prune_unused_types_walk): Always consider
function-local extern declarations as used.
* g++.dg/debug/pr90914.C: New testcase.
2019-06-18 Richard Biener <rguenther@suse.de>
PR debug/90900
* cfgexpand.c (expand_debug_expr): Treat NOTE_P DECL_RTL
as if optimized away.
* gcc.dg/gomp/pr90900.c: New testcase.
2019-05-07 Richard Biener <rguenther@suse.de>
PR lto/90369
* lto-wrapper.c (debug_objcopy): Use the original filename
including archive offset for the filename used for -save-temps.
From-SVN: r273446
PR rtl-optimization/91136
* df-core.c (ACCESSING REFS): Fix typos in comment.
* resource.c (mark_target_live_reg): Add artificial defs that occur at
the beginning of the block to the initial set of live registers.
From-SVN: r273437
Backported from mainline
2019-06-18 Uroš Bizjak <ubizjak@gmail.com>
* gcc.target/i386/pr81563.c (dg-final): Check that no
registers are restored from %esp.
From-SVN: r273423
This patch recognises Modula-2 as language for the traceback table,
fixing the problem shown in
https://gcc.gnu.org/ml/gcc-patches/2019-07/msg00848.html .
* config/rs6000/rs6000.c (rs6000_output_function_epilogue): Handle
Modula-2.
From-SVN: r273412
2019-07-08 Richard Biener <rguenther@suse.de>
PR tree-optimization/91108
* tree-ssa-sccvn.c: Include builtins.h.
(vn_reference_lookup_3): Use only alignment constraints to
verify same-valued store disambiguation.
* gcc.dg/tree-ssa/pr91091-1.c: New testcase.
* gcc.dg/tree-ssa/ssa-fre-78.c: Likewise.
From-SVN: r273233
2019-07-07 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91077
* trans-array.c (gfc_conv_scalarized_array_ref) Delete code
that gave symbol backend decl for subref arrays and deferred
length variables.
2019-07-07 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91077
* gfortran.dg/pointer_array_11.f90 : New test.
From-SVN: r273177
Backport r271869
Backport r271913
Backport r272414
A dynamic linker with lazy binding support may need to handle vector PCS
function symbols specially, so an ELF symbol table marking was
introduced for such symbols.
Function symbol references and definitions that follow the vector PCS
are marked in the generated assembly with .variant_pcs and then the
STO_AARCH64_VARIANT_PCS st_other flag is set on the symbol in the object
file. The marking is propagated to the dynamic symbol table by the
static linker so a dynamic linker can handle such symbols specially.
For this to work, the assembler, the static linker and the dynamic
linker has to be updated on a system. Old assembler does not support
the new .variant_pcs directive, so a toolchain with old binutils won't
be able to compile code that references vector PCS symbols.
gcc/ChangeLog:
* config/aarch64/aarch64-protos.h (aarch64_asm_output_alias): Declare.
(aarch64_asm_output_external): Declare.
* config/aarch64/aarch64.c (aarch64_asm_output_variant_pcs): New.
(aarch64_declare_function_name): Call aarch64_asm_output_variant_pcs.
(aarch64_asm_output_alias): New.
(aarch64_asm_output_external): New.
* config/aarch64/aarch64.h (ASM_OUTPUT_DEF_FROM_DECLS): Define.
(ASM_OUTPUT_EXTERNAL): Define.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/pcs_attribute-2.c: New test.
* gcc.target/aarch64/torture/simd-abi-4.c: Check .variant_pcs support.
* lib/target-supports.exp (check_effective_target_aarch64_variant_pcs):
New.
gcc/ChangeLog:
* config/aarch64/aarch64-protos.h (aarch64_asm_output_external): Remove
const.
* config/aarch64/aarch64.c (aarch64_asm_output_external): Call
default_elf_asm_output_external.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/pcs_attribute-2.c: Remove ifunc usage.
* gcc.target/aarch64/pcs_attribute-3.c: New test.
From-SVN: r273140
2019-07-04 James Clarke <jrtc27@debian.org>
* libgnarl/s-osinte__kfreebsd-gnu.ads (clockid_t): Make type
definition public.
(CLOCK_REALTIME): Make value public.
From-SVN: r273081
2019-07-04 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-03 Martin Liska <mliska@suse.cz>
PR tree-optimization/90892
* builtins.c (inline_expand_builtin_string_cmp): Handle '\0'
in string constants.
2019-07-04 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-03 Martin Liska <mliska@suse.cz>
PR tree-optimization/90892
* gcc.dg/pr90892.c: New test.
From-SVN: r273074
2019-07-04 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-03 Martin Liska <mliska@suse.cz>
PR middle-end/90899
* multiple_target.c (create_dispatcher_calls): Add to comdat
group only if set for ifunc.
2019-07-04 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-07-03 Martin Liska <mliska@suse.cz>
PR middle-end/90899
* gcc.target/i386/pr90899.c: New test.
From-SVN: r273073
The copy assignment operator for recursive_directory_iterator was not
exported despite being needed. The __shared_ptr default constructors are
not needed when compiling with GCC but Clang requires them for -O1.
PR libstdc++/91067
* acinclude.m4 (libtool_VERSION): Bump to 6:27:0.
* configure: Regenerate.
* config/abi/pre/gnu.ver (GLIBCXX_3.4.27): Add new version. Export
missing symbols.
* testsuite/27_io/filesystem/iterators/91067.cc: New test.
* testsuite/util/testsuite_abi.cc: Add new symbol version.
From-SVN: r273025
Clang seems to define built-ins that start with "__builtin_" as
non-keywords, which means that we need to use __has_builtin to detect
them, not __is_identifier. The built-ins that don't start with
"__builtin_" are keywords, and can only be detected using
__is_identifier and not by __has_builtin.
Backport from mainline
2019-07-02 Jonathan Wakely <jwakely@redhat.com>
* include/bits/c++config (_GLIBCXX_HAVE_BUILTIN_LAUNDER)
(_GLIBCXX_HAVE_BUILTIN_IS_CONSTANT_EVALUATED): Use __has_builtin
instead of __is_identifier to detect Clang support.
From-SVN: r273024
2019-07-02 Andrew Stubbs <ams@codesourcery.com>
Backport from mainline:
gcc/
2019-07-02 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.md (movdi_symbol_save_scc): Convert to define_insn
with inlined save and restore.
From-SVN: r272938
* except.c (build_noexcept_spec): Call
instantiate_non_dependent_expr_sfinae before
build_converted_constant_expr instead of calling
instantiate_non_dependent_expr after it. Add
processing_template_decl_sentinel.
* g++.dg/cpp0x/noexcept43.C: New test.
* g++.dg/cpp0x/noexcept44.C: New test.
From-SVN: r272918
* pt.c (unify): Allow COMPOUND_LITERAL_P in a non-deduced context.
* g++.dg/cpp0x/nondeduced1.C: New test.
* g++.dg/cpp0x/nondeduced2.C: New test.
* g++.dg/cpp0x/nondeduced3.C: New test.
* g++.dg/cpp0x/nondeduced4.C: New test.
From-SVN: r272917
* gcc-interface/decl.c (gnat_to_gnu_entity): Beep up comment on SAVED,
and tweak comment on the assertion about the scopes of Itypes. Do not
skip the regular processing for Itypes that are E_Record_Subtype with
a Cloned_Subtype. Get the Cloned_Subtype for every E_Record_Subtype
if the type is dummy and hasn't got its own freeze node.
<E_Record_Subtype>: Save again the DECL of the Cloned_Subtype, if any.
<E_Access_Subtype>: Save again the DECL of the equivalent type.
(Gigi_Equivalent_Type) <E_Access_Subtype>: New case.
From-SVN: r272823
* gcc-interface/decl.c (set_nonaliased_component_on_array_type): Add
missing guard for the presence of TYPE_CANONICAL.
(set_reverse_storage_order_on_array_type): Likewise.
From-SVN: r272812
Backported from mainline
2019-06-26 Jakub Jelinek <jakub@redhat.com>
PR target/90991
* config/i386/sse.md
(*<extract_type>_vinsert<shuffletype><extract_suf>_0): Use vmovupd,
vmovups, vmovdqu, vmovdqu32 or vmovdqu64 instead of the aligned
insns if operands[2] is misaligned_operand.
* gcc.target/i386/avx512dq-pr90991-1.c: New test.
From-SVN: r272803
Backported from mainline
2019-06-25 Jakub Jelinek <jakub@redhat.com>
PR sanitizer/90954
* c-omp.c (c_finish_omp_atomic): Allow tree_invariant_p in addition
to SAVE_EXPR in first operand of a COMPOUND_EXPR.
* c-c++-common/gomp/pr90954.c: New test.
From-SVN: r272802
Backported from mainline
2019-06-12 Jakub Jelinek <jakub@redhat.com>
PR c/90760
* symtab.c (symtab_node::set_section): Allow being called on aliases
as long as they aren't analyzed yet.
* gcc.dg/pr90760.c: New test.
From-SVN: r272800
2019-06-28 Andrew Stubbs <ams@codesourcery.com>
Backport from mainline:
2019-05-22 Andrew Stubbs <ams@codesourcery.com>
* config/gcn/gcn.c (gcn_trampoline_init): Call "sorry" on GCN5.
From-SVN: r272788
This is a minimal fix for the use of a deterministic RNG on mingw-w64,
simply using rand_s unconditionally. The rest of the r271740 changes on
trunk are not included. That means that RDSEED and RDRAND are not
available for mingw-w64 and the token passed to the constructor is
ignored completely.
PR libstdc++/85494 use rand_s in std::random_device
* config/os/mingw32-w64/os_defines.h (_GLIBCXX_USE_CRT_RAND_S): Define.
* src/c++11/cow-string-inst.cc (random_device::_M_init_pretr1)
[_GLIBCXX_USE_CRT_RAND_S]: Do nothing if rand_s will be used.
* src/c++11/random.cc [_GLIBCXX_USE_CRT_RAND_S] (__winxp_rand_s):
Define new function.
(random_device::_M_init_pretr1) [_GLIBCXX_USE_CRT_RAND_S]: Do nothing
if rand_s will be used.
(random_device::_M_getval_pretr1) [_GLIBCXX_USE_CRT_RAND_S]: Use
__winxp_rand_s().
* testsuite/26_numerics/random/random_device/85494.cc: New test.
From-SVN: r272748
When I refactored the filesystem_error code I changed it to only use the
constructor parameter in the what() string, instead of the string
returned by system_error::what(). That meant it no longer included the
description of the error_code that system_error adds. This restores the
previous behaivour, as encouraged by the standard ("Implementations
should include the system_error::what() string and the pathnames of
path1 and path2 in the native format in the returned string").
PR libstdc++/91012
* src/c++17/fs_path.cc (filesystem_error::_Impl): Use a string_view
for the what_arg parameters.
(filesystem_error::filesystem_error): Pass system_error::what() to
the _Impl constructor.
* testsuite/27_io/filesystem/filesystem_error/cons.cc: Ensure that
filesystem_error::what() contains system_error::what().
From-SVN: r272741
Backport from mainline
2019-06-17 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* configure.ac (ld_vers) <*-*-solaris2*>: Remove support for
alternative Solaris 11.4 format.
* configure: Regenerate.
From-SVN: r272676
2019-06-25 Andrew Stubbs <ams@codesourcery.com>
Backport from mainline
2019-05-24 Andrew Stubbs <ams@codesourcery.com>
gcc/
* config/gcn/gcn-run.c (main): Set a non-zero return value if the
kernel does not exit cleanly.
* config/gcn/gcn.md (gcn_return): Insert s_waitcnt before s_dcache_wb.
From-SVN: r272642
2019-06-25 Andrew Stubbs <ams@codesourcery.com>
Backport from mainline
2019-05-24 Andrew Stubbs <ams@codesourcery.com>
gcc/
* config/gcn/gcn.c (gcn_expand_prologue): Use gen_addsi3_scalar_carry
for lo-part.
From-SVN: r272641
2019-06-21 Richard Biener <rguenther@suse.de>
PR tree-optimization/90930
* tree-ssa-reassoc.c (rewrite_expr_tree_parallel): Set visited
flag on new stmts to avoid re-processing them.
From-SVN: r272636
2019-06-21 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90937
* trans-types.c (get_formal_from_actual_arglist): Get symbol from
current namespace so it will be freed later. If symbol is of type
character, get an empty character length.
2019-06-21 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90937
* gfortran.dg/external_procedure_4.f90: New test.
From-SVN: r272564
The change in r263433 broke the contract of the __rotate functions, by no
longer accepting empty ranges. That means that callers which inlined the
old version of std::rotate (without checks) that end up linking to a new
definition of std::__rotate (also without checks) could perform a divide
by zero and crash.
This restores the old contract of the __rotate overloads.
Backport from mainline
2019-06-19 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90920 partially revert r263433
* include/bits/stl_algo.h (__rotate): Restore checks for empty ranges.
(rotate): Remove checks.
* testsuite/25_algorithms/rotate/90920.cc: New test.
From-SVN: r272558
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/90290
* match.c (gfc_match_stopcode): Check F2008 condition on stop code.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/90290
* gfortran.dg/pr90290.f90: New test.
From-SVN: r272541
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/90002
* array.c (gfc_free_array_spec): When freeing an array-spec, avoid
an ICE for assumed-shape coarrays
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/90002
* gfortran.dg/pr90002.f90: New test.
From-SVN: r272540
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/89344
* expr.c (gfc_check_vardef_context): Check for INTENT(IN) variable
in SELECT TYPE construct.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/89344
* gfortran.dg/pr89344.f90: New test.
From-SVN: r272539
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/87907
* resolve.c (resolve_contained_fntype): Do not dereference a NULL
pointer.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/87907
* gfortran.dg/pr87907.f90: New testcase.
From-SVN: r272534
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/86587
* symbol.c (verify_bind_c_derived_type): Remove erroneous error
checking for BIND(C) and PRIVATE attributes.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/86587
* gfortran.dg/pr86587.f90: New test.
From-SVN: r272533
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/77632
* /decl.c (variable_decl): Mark a variable that is a target in pointer
initialization when in PROGRAM, MODULE, or SUBMODULE scope with an
implicit save.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/77632
* gfortran.dg/pr77632_1.f90: New test.
From-SVN: r272532
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/69499
* match.c (gfc_match_select_type): SELECT TYPE is an executable
statement, and cannot appear in MODULE or SUBMODULE scope.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/69499
* gfortran.dg/pr69499.f90: New test.
* gfortran.dg/module_error_1.f90: Update dg-error string.
From-SVN: r272531
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/69398
* decl.c (attr_decl): Check for duplicate DIMENSION attribute for a
CLASS entity.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/69398
* gfortran.dg/pr69398.f90: New test.
From-SVN: r272530
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/68544
* resolve.c (is_dt_name): New function to compare symbol name against
list of derived types.
(resolve_actual_arglist): Use it to find wrong code.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
PR fortran/68544
* gfortran.dg/pr68544.f90: New test.
* gfortran.dg/pr85687.f90: Modify test for new error message.
From-SVN: r272529
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
* arith.c (arith_power): Rework overflow of an integer to an integer
exponent.
2019-06-20 Steven G. Kargl <kargl@gcc.gnu.org>
Backport from mainline
* gfortran.dg/integer_exponentiation_4.f90: Update test.
* gfortran.dg/integer_exponentiation_5.F90: Ditto.
* gfortran.dg/no_range_check_1.f90: Ditto.
From-SVN: r272528
* config/mips/mips.c (mips_expand_builtin_insn): Swap the 1st
and 3rd operands of the fmadd/fmsub/maddv builtin.
* gcc.target/mips/msa-fmadd.c: New.
From-SVN: r272392
Fix several bugs in the encoding conversions for filesystem::path that
prevent conversion of Unicode characters outside the Basic Multilingual
Plane, and prevent returning basic_string specializations with
alternative allocator types.
The std::codecvt_utf8 class template is not suitable for UTF-16
conversions because it uses UCS-2 instead. For conversions between UTF-8
and UTF-16 either std::codecvt<C, char, mbstate> or
codecvt_utf8_utf16<C> must be used.
The __str_codecvt_in and __str_codecvt_out utilities do not
return false on a partial conversion (e.g. for invalid or incomplete
Unicode input). Add new helpers that treat partial conversions as
errors, and use them for all filesystem::path conversions.
PR libstdc++/90281 Fix string conversions for filesystem::path
* include/bits/fs_path.h (u8path) [_GLIBCXX_FILESYSTEM_IS_WINDOWS]:
Use codecvt_utf8_utf16 instead of codecvt_utf8. Use
__str_codecvt_in_all to fail for partial conversions and throw on
error.
[!_GLIBCXX_FILESYSTEM_IS_WINDOWS && _GLIBCXX_USE_CHAR8_T]
(path::_Cvt<char8_t>): Add explicit specialization.
[_GLIBCXX_FILESYSTEM_IS_WINDOWS] (path::_Cvt::_S_wconvert): Remove
overloads.
[_GLIBCXX_FILESYSTEM_IS_WINDOWS] (path::_Cvt::_S_convert): Use
if-constexpr instead of dispatching to _S_wconvert. Use codecvt
instead of codecvt_utf8. Use __str_codecvt_in_all and
__str_codecvt_out_all.
[!_GLIBCXX_FILESYSTEM_IS_WINDOWS] (path::_Cvt::_S_convert): Use
codecvt instead of codecvt_utf8. Use __str_codecvt_out_all.
(path::_S_str_convert) [_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Use
codecvt_utf8_utf16 instead of codecvt_utf8. Construct return values
with allocator. Use __str_codecvt_out_all. Fallthrough to POSIX code
after converting to UTF-8.
(path::_S_str_convert): Use codecvt instead of codecvt_utf8. Use
__str_codecvt_in_all.
(path::string): Fix initialization of string types with different
allocators.
(path::u8string) [_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Use
codecvt_utf8_utf16 instead of codecvt_utf8. Use __str_codecvt_out_all.
* include/bits/locale_conv.h (__do_str_codecvt): Reorder static and
runtime conditions.
(__str_codecvt_out_all, __str_codecvt_in_all): New functions that
return false for partial conversions.
* include/experimental/bits/fs_path.h (u8path):
[_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Implement correctly for mingw.
[_GLIBCXX_FILESYSTEM_IS_WINDOWS] (path::_Cvt::_S_wconvert): Add
missing handling for char8_t. Use codecvt and codecvt_utf8_utf16
instead of codecvt_utf8. Use __str_codecvt_in_all and
__str_codecvt_out_all.
[!_GLIBCXX_FILESYSTEM_IS_WINDOWS] (path::_Cvt::_S_convert): Use
codecvt instead of codecvt_utf8. Use __str_codecvt_out_all.
(path::string) [_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Use
codecvt_utf8_utf16 instead of codecvt_utf8. Construct return values
with allocator. Use __str_codecvt_out_all and __str_codecvt_in_all.
(path::string) [!_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Use
__str_codecvt_in_all.
(path::u8string) [_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Use
codecvt_utf8_utf16 instead of codecvt_utf8. Use __str_codecvt_out_all.
* src/c++17/fs_path.cc (path::_S_convert_loc): Use
__str_codecvt_in_all.
* src/filesystem/path.cc (path::_S_convert_loc): Likewise.
* testsuite/27_io/filesystem/path/construct/90281.cc: New test.
* testsuite/27_io/filesystem/path/factory/u8path.cc: New test.
* testsuite/27_io/filesystem/path/native/string.cc: Test with empty
strings and with Unicode characters outside the basic multilingual
plane.
* testsuite/27_io/filesystem/path/native/alloc.cc: New test.
* testsuite/experimental/filesystem/path/construct/90281.cc: New test.
* testsuite/experimental/filesystem/path/factory/u8path.cc: New test.
* testsuite/experimental/filesystem/path/native/alloc.cc: New test.
* testsuite/experimental/filesystem/path/native/string.cc: Test with
empty strings and with Unicode characters outside the basic
multilingual plane.
From-SVN: r272389
PR ada/80590
* exp_ch9.adb (Expand_N_Delay_Relative_Statement): Swap the two
conditions to avoid a unnecessary exception propagation in the default
case.
From-SVN: r272374
Jakub noted in https://gcc.gnu.org/ml/libstdc++/2019-04/msg00140.html
that an unwanted std::wstring::_M_replace_dispatch symbol has started to
be exported from the Fedora shared library. This symbol is triggered by
the instantiation of std::wstring::assign(const char*, const char*) from
std::__str_codecvt_in which is called from path::_S_convert_loc. The
branch that triggers that instantiation can't actually happen in that
case, because codecvt facets will only return noconv when the input and
output types are the same. Guarding the assign call with an if-constexpr
check that the types are the same avoids instantiating template
specializations that will never actually be needed.
Backport from mainline
2019-04-26 Jonathan Wakely <jwakely@redhat.com>
* config/abi/pre/gnu.ver (GLIBCXX_3.4): Replace wildcard that matches
wstring::_M_replace_dispatch with more specific patterns.
* include/bits/fs_path.h (path::_S_convert_loc<_InputIterator>):
Create const std::string to avoid redundant call to _S_convert_loc
with non-const pointers.
* include/bits/locale_conv.h (__do_str_codecvt): Use if-constexpr to
avoid unnecessary basic_string::assign instantiations.
From-SVN: r272306
Backport from mainline
2019-04-26 Jonathan Wakely <jwakely@redhat.com>
* include/experimental/bits/fs_path.h
(path::_S_convert_loc<_InputIterator>): Create const std::string to
avoid redundant call to _S_convert_loc with non-const pointers.
From-SVN: r272305
The fix for PR 88881 only added a workaround to filesystem::status, but
filesystem::symlink_status is also affected by the _wstat bug and needs
the same workaround.
The recent change to optimize path::parent_path() means that the
workaround can be simplified to just use parent_path().
Backport from mainline
2019-05-29 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/88881
* src/c++17/fs_ops.cc [_GLIBCXX_FILESYSTEM_IS_WINDOWS]
(status(const path&, error_code&)): Use parent_path() to remove
trailing slash.
(symlink_status(const path&, error_code&)): Duplicate workaround for
bug in _wstat for paths with trailing slash.
* testsuite/27_io/filesystem/operations/remove_all.cc: Check path
with trailing slash.
* testsuite/27_io/filesystem/operations/status.cc: Likewise.
* testsuite/27_io/filesystem/operations/symlink_status.cc: Likewise.
From-SVN: r272304
Parsing a complete string is more efficient than appending each
component one-by-one.
Backport from mainline
2019-05-29 Jonathan Wakely <jwakely@redhat.com>
* src/c++17/fs_path.cc (path::parent_path()): Create whole path at
once instead of building it iteratively.
From-SVN: r272303
Backport from mainline
2019-05-07 Jonathan Wakely <jwakely@redhat.com>
* doc/xml/manual/intro.xml: Fix DR 2537 and DR 2566 confusion.
From-SVN: r272302
Backport from mainline
2019-06-07 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90770
* src/Makefile.am (stamp-debug): Also test for missing makefile.
* src/Makefile.in: Regenerate.
From-SVN: r272299
Backport from mainline
2019-05-21 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90252
* testsuite/lib/libstdc++.exp (check_effective_target_tbb-backend):
Use "additional_flags" to pass -ltbb to v3_target_compile command.
Use check_v3_target_prop_cached to cache the result of the test.
Backport from mainline
2019-05-20 Thomas Rodgers <trodgers@redhat.com>
PR libstdc++/90252
* testsuite/lib/libstdc++.exp (check_effective_target_tbb-backend):
Changed v3_target_compile check from preprocess to executable.
Added "-ltbb" to v3_target_compile flags.
Backport from mainline
2019-05-20 Thomas Rodgers <trodgers@redhat.com>
* testsuite/lib/libstdc++.exp (check_effective_target_tbb-backend):
Add check for Thread Building Blocks 2018 or later.
From-SVN: r272298
PR c++/90832 - endless recursion when evaluating sizeof.
* constexpr.c (cxx_eval_constant_expression): Don't recurse on the
result of fold_sizeof_expr if is returns a SIZEOF_EXPR.
* typeck.c (cxx_sizeof_expr): Only return a SIZEOF_EXPR if the operand
is instantiation-dependent.
* g++.dg/cpp0x/constexpr-sizeof2.C: New test.
* g++.dg/cpp0x/constexpr-sizeof3.C: New test.
From-SVN: r272229
2019-06-11 Thomas Koenig <tkoenig@gcc.gnu.org>
Tomáš Trnka <trnka@scm.com>
Backport from trunk
PR fortran/90744
* trans-types.c (get_formal_from_actual_arglist): Unset typespec
flags which make no sense for procedures without explicit
interface.
2019-06-11 Thomas Koenig <tkoenig@gcc.gnu.org>
Tomáš Trnka <trnka@scm.com>
Backport from trunk
PR fortran/90744
* gfortran.dg/deferred_character_33.f90: New test.
* gfortran.dg/deferred_character_33a.f90: New test.
Co-Authored-By: Tomáš Trnka <trnka@scm.com>
From-SVN: r272173
2019-06-11 Richard Biener <rguenthe@suse.de>
d/90778
* toir.cc (pop_label): Only queue labels in a vector.
(cmp_labels): Label decl comparator.
(pop_binding_level): Pop labels in DECL_UID order to avoid
debug info differences.
From-SVN: r272147
2019-06-09 Edward Smith-Rowland <3dw4rd@verizon.net>
Test for C++20 p0858 - ConstexprIterator requirements.
* testsuite/21_strings/basic_string_view/requirements/constexpr_iter.cc:
New test.
* testsuite/23_containers/array/requirements/constexpr_iter.cc:
New test.
From-SVN: r272097
2019-06-06 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-05-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/90450
* tree-ssa-loop-im.c (struct im_mem_ref): Add ref_decomposed.
(mem_ref_hasher::equal): Check it.
(mem_ref_alloc): Initialize it.
(gather_mem_refs_stmt): Set it.
2019-05-15 Richard Biener <rguenther@suse.de>
PR c/90474
* c-common.c (c_common_mark_addressable_vec): Also mark
a COMPOUND_LITERAL_EXPR_DECL addressable similar to
c_mark_addressable.
2019-05-13 Richard Biener <rguenther@suse.de>
PR tree-optimization/90402
* tree-if-conv.c (tree_if_conversion): Value number only
the loop body by making the latch an exit of the region
as well.
* tree-ssa-sccvn.c (process_bb): Add flag whether to skip
processing PHIs.
(do_rpo_vn): Deal with multiple edges into the entry block
that are not backedges inside the region by skipping PHIs
of the entry block.
* gcc.dg/torture/pr90402-1.c: New testcase.
2019-05-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/90328
* tree-data-ref.h (dr_may_alias_p): Pass in the actual loop nest.
* tree-data-ref.c (dr_may_alias_p): Check whether the clique
is valid in the loop nest before using it.
(initialize_data_dependence_relation): Adjust.
* graphite-scop-detection.c (build_alias_set): Pass the SCOP enclosing
loop as loop-nest to dr_may_alias_p.
* gcc.dg/torture/pr90328.c: New testcase.
From-SVN: r271995
* fold-const.c (extract_muldiv_1) <PLUS_EXPR>: Do not distribute a
multiplication by a power-of-two value.
(fold_plusminus_mult_expr): Use pow2p_hwi to spot a power-of-two value
and turn the modulo operation into a masking operation.
From-SVN: r271964
Backported from mainline
2019-05-29 Jakub Jelinek <jakub@redhat.com>
PR c++/90598
* tree.c (lvalue_kind): Return clk_none for expressions with
with VOID_TYPE_P.
* g++.dg/cpp0x/pr90598.C: New test.
2019-05-02 Jonathan Wakely <jwakely@redhat.com>
* testsuite/experimental/propagate_const/requirements2.cc: Adjust
dg-error.
From-SVN: r271959
Backported from mainline
2019-05-27 Jakub Jelinek <jakub@redhat.com>
PR libgomp/90641
* work.c (gomp_init_work_share): Instead of aligning final ordered
value to multiples of long long alignment, align to that the
first part (ordered team ids) and if inline_ordered_team_ids
is not on a long long alignment boundary within the structure,
use __alignof__ (long long) - 1 pad size always.
* loop.c (GOMP_loop_start): Fix *mem computation if
inline_ordered_team_ids is not aligned on long long alignment boundary
within the structure.
* loop-ull.c (GOMP_loop_ull_start): Likewise.
* sections.c (GOMP_sections2_start): Likewise.
From-SVN: r271958
Backported from mainline
2019-05-24 Jakub Jelinek <jakub@redhat.com>
PR libgomp/90585
* plugin/plugin-hsa.c (print_kernel_dispatch, run_kernel): Use PRIu64
macro instead of "lu".
(release_kernel_dispatch): Likewise. Cast shadow->debug to uintptr_t
before casting to void *.
From-SVN: r271957
This was missed with the backport of the mfentry changes for
Darwin, and documents the target-supports addition only. (NFC).
Corrected ChangeLog
gcc/
2019-06-05 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-23 Iain Sandoe <iain@sandoe.co.uk>
* doc/sourcebuild.texi: Document mfentry target support.
From-SVN: r271951
* doc/xml/manual/status_cxx2017.xml: Fix typo in documentation of
implementation-defined support for [fs.conform.9945].
* doc/xml/manual/status_cxx2020.xml: Add feature-test macro for
P0811R3. Change status of P1353R0.
* doc/html/*: Regenerate.
From-SVN: r271775
PR fortran/90329
* lto-streamer.h (LTO_minor_version): Bump to 1.
Backported from mainline
2019-05-29 Jakub Jelinek <jakub@redhat.com>
PR fortran/90329
* lang.opt (fbroken-callers): Remove.
(ftail-call-workaround, ftail-call-workaround=): New options.
* gfortran.h (struct gfc_namespace): Add implicit_interface_calls.
* interface.c (gfc_procedure_use): Set implicit_interface_calls
for calls to implicit interface procedures.
* trans-decl.c (create_function_arglist): Use flag_tail_call_workaround
instead of flag_broken_callers. If it is not 2, also require
sym->ns->implicit_interface_calls.
* invoke.texi (fbroken-callers): Remove documentation.
(ftail-call-workaround, ftail-call-workaround=): Document.
2019-05-19 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/90329
* invoke.texi: Document -fbroken-callers.
* lang.opt: Add -fbroken-callers.
* trans-decl.c (create_function_arglist): Only set
DECL_HIDDEN_STRING_LENGTH if flag_broken_callers is set.
2019-05-16 Jakub Jelinek <jakub@redhat.com>
PR fortran/90329
* tree-core.h (struct tree_decl_common): Document
decl_nonshareable_flag for PARM_DECLs.
* tree.h (DECL_HIDDEN_STRING_LENGTH): Define.
* calls.c (expand_call): Don't try tail call if caller
has any DECL_HIDDEN_STRING_LENGTH PARM_DECLs that are or might be
passed on the stack and callee needs to pass any arguments on the
stack.
* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Use
else if instead of series of mutually exclusive ifs. Handle
DECL_HIDDEN_STRING_LENGTH for PARM_DECLs.
* tree-streamer-out.c (pack_ts_decl_common_value_fields): Likewise.
* trans-decl.c (create_function_arglist): Set
DECL_HIDDEN_STRING_LENGTH on hidden string length PARM_DECLs if
len is constant.
From-SVN: r271743
PR bootstrap/90543
* optc-save-gen.awk: In cl_optimization_print, use correct condition
for var_opt_string printing. In cl_optimization_print_diff, print
(null) instead of invoking undefined behavior if one of the
var_opt_string pointers is NULL and use && instead of first || in the
guarding condition. For var_target_other options, handle const char *
target variables similarly to const char * optimize node variables.
From-SVN: r271737
Backport from mainline
2019-05-28 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90634
* include/experimental/bits/fs_path.h (path::path(path&&)): Only call
_M_split_cmpts() for a path with multiple components.
(path::_S_is_dir_sep()): Add missing 'static' keyword to function.
* src/filesystem/path.cc (path::_M_split_cmpts()): Count number of
components and reserve space in vector. Return early when there is
only one component.
* testsuite/27_io/filesystem/path/construct/90634.cc: New test.
* testsuite/experimental/filesystem/path/construct/90634.cc: New test.
From-SVN: r271719
* gcc-interface/trans.c (lvalue_required_for_attribute_p): Return 0
for 'Size too.
(Identifier_to_gnu): Use the actual subtype for a reference to a
packed array in a return statement.
(Attribute_to_gnu) <Attr_Size>: Do not strip VIEW_CONVERT_EXPRs from
the prefix in every case.
From-SVN: r271692
* gcc-interface/decl.c (components_to_record): Set a name on the type
created for the REP part, if any.
* gcc-interface/utils.c (finish_record_type): Only take the maximum
when merging sizes for a variant part at offset 0.
(merge_sizes): Rename has_rep parameter into max.
From-SVN: r271682
* gcc-interface/trans.c (Call_to_gnu): Do not initialize the temporary
created out of addressability concerns if it's for the _Init parameter
of an initialization procedure.
From-SVN: r271660
* gcc-interface/trans.c (Identifier_to_gnu): Minor tweaks.
(gnat_to_gnu): Do not convert the result if it is a reference to an
unconstrained array used as the prefix of an attribute reference that
requires an lvalue.
From-SVN: r271654
* gcc-interface/trans.c (Gigi_Types_Compatible): New predicate.
(Identifier_to_gnu): Use it to assert that the type of the identifier
and that of its entity are compatible for gigi. Rename a couple of
local variables and separate the processing of the result type.
From-SVN: r271651
PR target/90530
* config/pa/pa.c (pa_can_change_mode_class): Accept mode changes from
DImode to SImode in floating-point registers on 64-bit target.
* config/pa/pa.md (umulsidi3): Change nonimmediate_operand to
register_operand in xmpyu patterns.
From-SVN: r271612
This is another attempt to reduce how often the assertions are
evaluated, so that code which doesn't try to use the function objects
doesn't need them to be invocable.
For _Rb_tree we access the _M_key_compare object directly, so can't put
the assertions in an accessor function for it. However, every invocation
of _M_key_compare is accompanied by a use of _S_key, so the assertions
can be put in there. For _Hashtable there are member functions that are
consistently used to obtain a hash code or test for equality, so the
assertions can go in those members.
Backport from mainline
2019-05-17 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/85965
* include/bits/hashtable.h (_Hashtable::~_Hashtable()): Remove static
assertions from the destructor.
* include/bits/hashtable_policy.h (_Hash_code_base::_M_hash_code):
Move static_assert for hash function to here.
(_Hash_table_base::_M_equals): Move static_assert for equality
predicate to here.
* include/bits/stl_tree.h (_Rb_tree::_S_key(_Const_Link_type)): Move
assertions here. Access the value directly instead of calling _S_value.
(_Rb_tree::_S_key(_Const_Base_ptr)): Do downcast and forward to
_S_key(_Const_Link_type).
* testsuite/23_containers/set/85965.cc: Check construction,
destruction, assignment and size() do not trigger the assertions.
* testsuite/23_containers/unordered_set/85965.cc: Likewise.
* testsuite/23_containers/map/48101_neg.cc: Call find and adjust
expected errors.
* testsuite/23_containers/multimap/48101_neg.cc: Likewise.
* testsuite/23_containers/multiset/48101_neg.cc: Likewise.
* testsuite/23_containers/set/48101_neg.cc: Likewise.
* testsuite/23_containers/unordered_map/48101_neg.cc: Likewise.
* testsuite/23_containers/unordered_multimap/48101_neg.cc: Likewise.
* testsuite/23_containers/unordered_multiset/48101_neg.cc: Likewise.
* testsuite/23_containers/unordered_set/48101_neg.cc: Likewise.
From-SVN: r271607
It's possible for the function pointer comparison to fail even though
the type is correct, because the function could be defined multiple
times with different addresses when shared libraries are in use.
Retain the function pointer check for the common case where the check
succeeds, but compare typeinfo (if RTTI is enabled) if the first check
fails.
Backport from mainline
2019-05-23 Jonathan Wakely <jwakely@redhat.com>
* include/experimental/any (__any_caster): Use RTTI if comparing
addresses fails, to support non-unique addresses in shared libraries.
* include/std/any (__any_caster): Likewise.
* testsuite/experimental/any/misc/any_cast_neg.cc: Use 0 for dg-error
line number.
From-SVN: r271559
This corresponds to the fixes done for std::any_cast, but has to be done
without if-constexpr. The dummy specialization of _Manager_internal<_Op>
is used to avoid instantiating the real _Manager_internal<T>::_S_manage
function just to compare its address.
Backport from mainline
2019-05-23 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90220
* include/experimental/any (__any_caster): Constrain to only be
callable for object types. Use remove_cv_t instead of decay_t.
If the type decays or isn't copy constructible, compare the manager
function to a dummy specialization.
(__any_caster): Add overload constrained for non-object types.
(any::_Manager_internal<_Op>): Add dummy specialization.
* testsuite/experimental/any/misc/any_cast.cc: Test function types
and array types.
From-SVN: r271558
Backport from mainline
2019-05-22 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90557
* src/c++17/fs_path.cc (path::_List::operator=(const _List&)): Fix
reversed arguments to uninitialized_copy_n.
* testsuite/27_io/filesystem/path/assign/copy.cc: Check that source
is unchanged by copy assignment.
* testsuite/util/testsuite_fs.h (compare_paths): Use std::equal to
compare path components.
From-SVN: r271528
Account for Cortex-M3 Errata 602117. The -mfix-cortex-m3-ldrd option is
enabled by default, if -mcpu=cortex-m3 is used.
gcc/
* config/arm/t-rtems: Replace ARMv7-M multilibs with Cortex-M
multilibs.
From-SVN: r271452
Backport from trunk.
When using posix_spawn or fork to launch a child process, the parent
needs to wait for the child, otherwise the dead child is left as a
zombie process. For this purpose one can install a signal handler for
SIGCHLD.
2019-05-20 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/90038
* intrinsics/execute_command_line (sigchld_handler): New function.
(execute_command_line): Install handler for SIGCHLD.
* configure.ac: Check for presence of sigaction and waitpid.
* config.h.in: Regenerated.
* configure: Regenerated.
fork() semantics can be problematic. Most unix style OS'es have
posix_spawn which can be used to replace fork + exec in many cases.
For more information see
e.g. https://www.microsoft.com/en-us/research/uploads/prod/2019/04/fork-hotos19.pdf
This replaces the one use of fork in libgfortran with posix_spawn.
2019-05-20 Janne Blomqvist <jb@gcc.gnu.org>
PR libfortran/90038
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_spawn.
* intrinsics/execute_command_line (execute_command_line): Use
posix_spawn.
* Makefile.in: Regenerated.
* config.h.in: Regenerated.
* configure: Regenerated.
Regtested on x86_64-pc-linux-gnu.
From-SVN: r271427
An array of an unknown bound is an incomplete type, so no object of such
a type can be constructed. This means __is_constructible should always
be false for an array of unknown bound.
This patch also changes the std::is_default_constructible trait to use
std::is_constructible, which now gives the right answer for arrays of
unknown bound.
gcc/cp:
Backported from mainline
2019-05-20 Jonathan Wakely <jwakely@redhat.com>
PR c++/90532 Ensure __is_constructible(T[]) is false
* method.c (is_xible_helper): Return error_mark_node for construction
of an array of unknown bound.
gcc/testsuite:
Backported from mainline
2019-05-20 Jonathan Wakely <jwakely@redhat.com>
PR c++/90532 Ensure __is_constructible(T[]) is false
* g++.dg/ext/90532.C: New test.
libstdc++-v3:
Backported from mainline
2019-05-20 Jonathan Wakely <jwakely@redhat.com>
PR c++/90532 Ensure __is_constructible(T[]) is false
* include/std/type_traits (__do_is_default_constructible_impl)
(__is_default_constructible_atom, __is_default_constructible_safe):
Remove.
(is_default_constructible): Use is_constructible.
* testsuite/20_util/is_constructible/value.cc: Check int[] case.
* testsuite/20_util/is_default_constructible/value.cc: Likewise.
* testsuite/20_util/is_trivially_constructible/value.cc: Likewise.
* testsuite/20_util/is_trivially_default_constructible/value.cc:
Likewise.
From-SVN: r271417
2019-05-19 Paul Thomas <pault@gcc.gnu.org>
PR fortran/90498
* trans-stmt.c (trans_associate_var) Do not use the saved
descriptor if the expression is a COMPONENT_REF.
2019-05-19 Paul Thomas <pault@gcc.gnu.org>
PR fortran/90498
* gfortran.dg/associate_48.f90 : New test.
From-SVN: r271383
Backported from mainline
2019-05-16 Jakub Jelinek <jakub@redhat.com>
PR c++/90484
* tree-ssa-scopedtables.c (equal_mem_array_ref_p): Don't assert that
sz0 is equal to sz1, instead return false in that case.
From-SVN: r271356
Backported from mainline
2019-05-16 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (lower_rec_input_clauses): If OMP_CLAUSE_IF
has non-constant expression, force sctx.lane and use two
argument IFN_GOMP_SIMD_LANE instead of single argument.
* tree-ssa-dce.c (eliminate_unnecessary_stmts): Don't DCE
two argument IFN_GOMP_SIMD_LANE without lhs.
* tree-vectorizer.h (struct _loop_vec_info): Add simd_if_cond
member.
(LOOP_VINFO_SIMD_IF_COND, LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND):
Define.
(LOOP_REQUIRES_VERSIONING): Or in
LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
simd_if_cond.
(vect_analyze_loop_2): Punt if LOOP_VINFO_SIMD_IF_COND is constant 0.
* tree-vect-loop-manip.c (vect_loop_versioning): Add runtime check
from simd if clause if needed.
* gcc.dg/vect/vect-simd-1.c: New test.
* gcc.dg/vect/vect-simd-2.c: New test.
* gcc.dg/vect/vect-simd-3.c: New test.
* gcc.dg/vect/vect-simd-4.c: New test.
From-SVN: r271355
Backported from mainline
2019-05-15 Jakub Jelinek <jakub@redhat.com>
* omp-low.c (lower_rec_input_clauses): For if (0) or simdlen (1) set
max_vf to 1.
* omp-expand.c (expand_omp_simd): For if (0) or simdlen (1) clear
safelen_int and set loop->dont_vectorize.
* c-c++-common/gomp/simd8.c: New test.
From-SVN: r271354
Backported from mainline
2019-05-15 Jakub Jelinek <jakub@redhat.com>
PR debug/90197
* cp-gimplify.c (genericize_cp_loop): Emit a DEBUG_BEGIN_STMT
before the condition (or if missing or constant non-zero at the end
of the loop. Emit a DEBUG_BEGIN_STMT before the increment expression
if any. Don't call protected_set_expr_location on incr if it already
has a location.
From-SVN: r271353
Backported from mainline
2019-05-10 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/90385
* tree-parloops.c (try_create_reduction_list): Punt on non-SSA_NAME
arguments of the exit phis.
* gfortran.dg/pr90385.f90: New test.
From-SVN: r271352
Backported from mainline
2019-05-03 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/90303
* ipa-devirt.c (obj_type_ref_class, get_odr_type): Don't use
TYPE_CANONICAL for TYPE_STRUCTURAL_EQUALITY_P types in !in_lto_p mode.
* g++.target/i386/pr90303.C: New test.
From-SVN: r271349
2019-05-17 Richard Biener <rguenther@suse.de>
Backport from mainline
2019-05-07 Richard Biener <rguenther@suse.de>
PR tree-optimization/90316
* tree-ssa-alias.h (get_continuation_for_phi): Take walking
limit by reference.
(walk_non_aliased_vuses): Take walking limit argument.
* tree-ssa-alias.c (maybe_skip_until): Take limit and abort
walking if it is reached instead of just counting.
(get_continuation_for_phi): Likewise.
(walk_non_aliased_vuses): Likewise, instead of leaving counter
limiting to the callback.
* tree-ssa-sccvn.c (vn_reference_lookup_2): Adjust.
(vn_reference_lookup_3): Likewise.
(vn_reference_lookup_pieces): Likewise.
(vn_reference_lookup): Likewise.
* tree-ssa-pre.c (translate_vuse_through_block): Limit walking.
* tree-ssa-scopedtables.c (vuse_eq): Adjust.
(avail_exprs_stack::lookup_avail_expr): Likewise.
2019-05-06 Richard Biener <rguenther@suse.de>
PR tree-optimization/90316
* tree-ssa-alias.c (maybe_skip_until): Pass in target BB,
compute target on demand.
(get_continuation_for_phi): Remove code walking stmts to
get to a target virtual operand which could end up being
quadratic.
From-SVN: r271314
In this implementation it is an error to pass the empty path to absolute,
because the empty path doesn't represent any file in the filesystem so
the function cannot meet its postcondition.
Currently the absolute(const path&, error_code&) overload reports an
error for the empty path, but using errc::no_such_file_or_directory, and
the other overload does not report an error. This patch makes them
consistntly report an errc::invalid_argument error for the empty path.
Backport from mainline
2019-05-04 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90299
* src/c++17/fs_ops.cc (absolute(const path&)): Report an error if the
argument is an empty path.
(absolute(const path&, error_code&)): Use invalid_argument as error
code instead of no_such_file_or_directory.
* testsuite/27_io/filesystem/operations/absolute.cc: Check handling
of non-existent paths and empty paths with both overloads of absolute.
Backport from mainline
2019-05-16 Jonathan Wakely <jwakely@redhat.com>
* src/c++17/fs_ops.cc (absolute(const path&, error_code&))
[_GLIBCXX_FILESYSTEM_IS_WINDOWS]: Remove bogus assertion.
From-SVN: r271301
C preprocessor definitions should not be translated.
2019-05-15 Janne Blomqvist <jb@gcc.gnu.org>
Backport from trunk
* parse.c (gfc_parse_file): Remove translation string markers.
From-SVN: r271264
The root_path.cc test had some debugging macros left in accidentally, so
didn't FAIL correctly if an assertion failed.
The string-char8_t.cc tests didn't compile on Windows.
Backport from mainline
2019-04-30 Jonathan Wakely <jwakely@redhat.com>
* testsuite/27_io/filesystem/path/decompose/root_path.cc: Remove
macros accidentally left in.
* testsuite/27_io/filesystem/path/native/string-char8_t.cc: Remove
unnecessary -lstdc++fs option. Fix test for mingw.
* testsuite/experimental/filesystem/path/native/string-char8_t.cc:
Fix test for mingw.
From-SVN: r271263
Make the filesystem::path constructors SFINAE away for void* arguments,
instead of giving an error due to iterator_traits<void*>::reference.
Backport from mainline
2019-05-13 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90454.cc path construction from void*
* include/bits/fs_path.h (path::_Path): Use remove_pointer so that
pointers to void are rejected as well as void.
* include/experimental/bits/fs_path.h (path::_Path): Likewise.
* testsuite/27_io/filesystem/path/construct/80762.cc: Also check
pointers to void.
* testsuite/experimental/filesystem/path/construct/80762.cc: Likewise.
From-SVN: r271262
2019-05-15 Li Jia He <helijia@linux.ibm.com>
Backport from mainline.
2019-05-07 Li Jia He <helijia@linux.ibm.com>
* tree-ssa-phiopt.c (two_value_replacement): Fix a typo in parameter
detection.
* gcc.dg/tree-ssa/pr37508.c: Add the no-ssa-phiopt option to skip phi
optimization.
* gcc.dg/tree-ssa/pr88676-2.c: New testcase.
From-SVN: r271198
2019-05-14 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-11 Iain Sandoe <iain@sandoe.co.uk>
PR testsuite/81058
* gcc.target/i386/avx512bw-vpmovswb-1.c: Use regular data section
for variables on Darwin, rather than common.
* gcc.target/i386/avx512bw-vpmovuswb-1.c: Likewise.
* gcc.target/i386/avx512bw-vpmovwb-1.c: Likewise.
From-SVN: r271186
These need an asm shim to build.
2019-05-14 Iain Sandoe <iain@sandoe.co.uk>
Backport from mainline.
2019-05-10 Iain Sandoe <iain@sandoe.co.uk>
* gcc.target/x86_64/abi/avx512f/abi-avx512f.exp: Darwin is
now tested.
* gcc.target/x86_64/abi/avx512f/asm-support-darwin.s: New.
From-SVN: r271178
2019-05-14 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-05-13 Martin Liska <mliska@suse.cz>
PR tree-optimization/90416
* tree-vect-stmts.c (vect_check_load_store_mask): Concatenate
string instead of passing the second part as va_arg argument.
From-SVN: r271152
2019-05-14 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-05-13 Martin Liska <mliska@suse.cz>
PR gcov-profile/90380
* gcov.c (handle_cycle): Do not support zero cycle count,
it should not be possible.
(path_contains_zero_cycle_arc): New function.
(circuit): Ignore zero cycle arc counts.
From-SVN: r271151
2019-05-14 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-05-13 Martin Liska <mliska@suse.cz>
PR gcov-profile/90380
* gcov.c (enum loop_type): Remove the enum and
the operator.
(handle_cycle): Assert that we should not reach
a negative count.
(circuit): Use loop_found instead of a tri-state loop_type.
(get_cycles_count): Do not handle NEGATIVE_LOOP as it can't
happen.
From-SVN: r271150
2019-05-14 Chenghua Xu <paul.hua.gm@gmail.com>
PR target/90357
* config/mips/mips.c (mips_split_move): Skip forward SRC into
next insn when the SRC reg is dead.
From-SVN: r271147
When generating C prototypes for Fortran procedures with the
-fc-prototypes and -fc-prototypes-external options, print a snippet
defining macros for complex types, and add C++ support by suppressing
mangling.
fortran/ChangeLog:
2019-05-12 Janne Blomqvist <jb@gcc.gnu.org>
* dump-parse-tree.c (get_c_type_name): Use macros for complex type
names.
* parse.c (gfc_parse_file): Define complex macros, add CPP support
when printing C prototypes.
From-SVN: r271109
2019-05-11 Andreas Tobler <andreast@gcc.gnu.org>
Backport from mainline.
2019-04-25 Andreas Tobler <andreast@gcc.gnu.org>
* config/i386/freebsd64.h: Add bits for 32-bit multilib support.
* config/i386/t-freebsd64: New file.
* config.gcc: Add the t-freebsd64 for multilib support.
From-SVN: r271099
The test uses remove_pointer because in most cases native_handle_type is
a pointer to the actual type that the C++ class contains. However, for
std::thread, native_handle_type is the same type as the type contained
in std::thread, and so remove_pointer is not needed. On targets where
pthread_t is a pointer type remove_pointer<native_handle_type> is not a
no-op, instead it transforms pthread_t and causes the test to fail.
The fix is to not apply remove_pointer when testing std::thread.
Backport from mainline
2019-05-10 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/81266
* testsuite/util/thread/all.h: Do not use remove_pointer for
std::thread::native_handle_type.
From-SVN: r271094
2019-05-11 Paul Thomas <pault@gcc.gnu.org>
PR fortran/90093
* gfortran.dg/ISO_Fortran_binding_12.f90: New test.
* gfortran.dg/ISO_Fortran_binding_12.c: Supplementary code.
PR fortran/90352
* gfortran.dg/iso_c_binding_char_1.f90: New test.
PR fortran/90355
* gfortran.dg/ISO_Fortran_binding_4.f90: Add 'substr' to test
the direct passing of substrings as descriptors to bind(C).
* gfortran.dg/assign_10.f90: Increase the tree_dump count of
'atmp' to account for the setting of the 'span' field.
* gfortran.dg/transpose_optimization_2.f90: Ditto.
From-SVN: r271090
2019-05-11 Paul Thomas <pault@gcc.gnu.org>
PR fortran/90093
* trans-decl.c (convert_CFI_desc): Test that the dummy is
present before doing any of the conversions.
PR fortran/90352
* decl.c (gfc_verify_c_interop_param): Restore the error for
charlen > 1 actual arguments passed to bind(C) procs.
Clean up trailing white space.
PR fortran/90355
* trans-array.c (gfc_trans_create_temp_array): Set the 'span'
field to the element length for all types.
(gfc_conv_expr_descriptor): The force_no_tmp flag is used to
prevent temporary creation, especially for substrings.
* trans-decl.c (gfc_trans_deferred_vars): Rather than assert
that the backend decl for the string length is non-null, use it
as a condition before calling gfc_trans_vla_type_sizes.
* trans-expr.c (gfc_conv_gfc_desc_to_cfi_desc): 'force_no_tmp'
is set before calling gfc_conv_expr_descriptor.
* trans.c (get_array_span): Move the code for extracting 'span'
from gfc_build_array_ref to this function. This is specific to
descriptors that are component and indirect references.
* trans.h : Add the force_no_tmp flag bitfield to gfc_se.
2019-05-11 Paul Thomas <pault@gcc.gnu.org>
PR fortran/90093
* gfortran.dg/ISO_Fortran_binding_12.f90: New test.
* gfortran.dg/ISO_Fortran_binding_12.c: Supplementary code.
PR fortran/90352
* gfortran.dg/iso_c_binding_char_1.f90: New test.
PR fortran/90355
* gfortran.dg/ISO_Fortran_binding_4.f90: Add 'substr' to test
the direct passing of substrings as descriptors to bind(C).
* gfortran.dg/assign_10.f90: Increase the tree_dump count of
'atmp' to account for the setting of the 'span' field.
* gfortran.dg/transpose_optimization_2.f90: Ditto.
From-SVN: r271089
The 20_util/scoped_allocator/69293_neg.cc test was failing in C++2a mode
because the expected static_assert text wasn't matched. The code is
still ill-formed in C++2a, but uses the new __uses_alloc_args function
and so fails a different static_assert. This patch adds the same string
to the new static_assert, so the test passes.
Now that G++ allows concepts to be declared without 'bool' we can use
the correct C++2a syntax for the _Std_pair concept used to constrain the
uses-allocator construction utilities.
Also add a new test to verify that pmr::polymorphic_allocator correctly
performs recursive uses-allocator construction for nested pairs in
C++2a.
Backport from mainline
2019-04-26 Jonathan Wakely <jwakely@redhat.com>
* include/std/memory (__uses_alloc_args): Add string-literal to
static_assert, to match the one in __uses_alloc.
[__cpp_concepts] (_Std_pair): Use C++2a syntax for concept.
* testsuite/20_util/polymorphic_allocator/construct_c++2a.cc: Check
for recursive uses-allocator construction of nested pairs.
* testsuite/20_util/scoped_allocator/construct_pair_c++2a.cc:: Add
comment.
From-SVN: r271082
Backport from mainline
2019-04-25 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/90239
* doc/xml/manual/status_cxx2020.xml: Amend P0591R4 status.
* include/std/scoped_allocator [__cplusplus > 201703L]
(scoped_allocator_adaptor::construct): Define in terms of
uses_allocator_construction_args, as per P0591R4.
* testsuite/20_util/scoped_allocator/construct_pair_c++2a.cc: New test.
* testsuite/util/testsuite_allocator.h: Remove name of unused
parameter.
* doc/html/*: Regenerate.
From-SVN: r271081
gcc/ChangeLog:
2019-05-10 Kelvin Nilsen <kelvin@gcc.gnu.org>
Backport from mainline.
2019-05-07 Kelvin Nilsen <kelvin@gcc.gnu.org>
PR target/89765
* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
In handling of ALTIVEC_BUILTIN_VEC_INSERT, use modular arithmetic
to compute vector element selector for both constant and variable
operands.
gcc/testsuite/ChangeLog:
2019-05-10 Kelvin Nilsen <kelvin@gcc.gnu.org>
Backport from mainline.
2019-05-07 Kelvin Nilsen <kelvin@gcc.gnu.org>
PR target/89765
* gcc.target/powerpc/pr89765-mc.c: New test.
* gcc.target/powerpc/vsx-builtin-10c.c: New test.
* gcc.target/powerpc/vsx-builtin-10d.c: New test.
* gcc.target/powerpc/vsx-builtin-11c.c: New test.
* gcc.target/powerpc/vsx-builtin-11d.c: New test.
* gcc.target/powerpc/vsx-builtin-12c.c: New test.
* gcc.target/powerpc/vsx-builtin-12d.c: New test.
* gcc.target/powerpc/vsx-builtin-13c.c: New test.
* gcc.target/powerpc/vsx-builtin-13d.c: New test.
* gcc.target/powerpc/vsx-builtin-14c.c: New test.
* gcc.target/powerpc/vsx-builtin-14d.c: New test.
* gcc.target/powerpc/vsx-builtin-15c.c: New test.
* gcc.target/powerpc/vsx-builtin-15d.c: New test.
* gcc.target/powerpc/vsx-builtin-16c.c: New test.
* gcc.target/powerpc/vsx-builtin-16d.c: New test.
* gcc.target/powerpc/vsx-builtin-17c.c: New test.
* gcc.target/powerpc/vsx-builtin-17d.c: New test.
* gcc.target/powerpc/vsx-builtin-18c.c: New test.
* gcc.target/powerpc/vsx-builtin-18d.c: New test.
* gcc.target/powerpc/vsx-builtin-19c.c: New test.
* gcc.target/powerpc/vsx-builtin-19d.c: New test.
* gcc.target/powerpc/vsx-builtin-20c.c: New test.
* gcc.target/powerpc/vsx-builtin-20d.c: New test.
* gcc.target/powerpc/vsx-builtin-9c.c: New test.
* gcc.target/powerpc/vsx-builtin-9d.c: New test.
From-SVN: r271064
2019-05-09 Thomas Koenig <tkoenig@gcc.gnu.org>
Backport from trunk
PR fortran/90351
PR fortran/90329
* gfortran.dg/dump-parse-tree.c: Include version.h.
(gfc_dump_external_c_prototypes): New function.
(get_c_type_name): Select "char" as a name for a simple char.
Adjust to handling external functions. Also handle complex.
(write_decl): Add argument bind_c. Adjust for dumping of external
procedures.
(write_proc): Likewise.
(write_interop_decl): Add bind_c argument to call of write_proc.
* gfortran.h: Add prototype for gfc_dump_external_c_prototypes.
* lang.opt: Add -fc-prototypes-external flag.
* parse.c (gfc_parse_file): Move dumping of BIND(C) prototypes.
Call gfc_dump_external_c_prototypes if option is set.
* invoke.texi: Document -fc-prototypes-external.
From-SVN: r271038
* pt.c (tsubst_copy_and_build): Use a dedicated variable for the last
element in the vector.
* g++.dg/cpp1y/lambda-generic-90265.C: New test.
From-SVN: r270919
/cp
2019-05-06 Paolo Carlini <paolo.carlini@oracle.com>
PR c++/90173
* decl.c (grokdeclarator): Set type to error_mark_node
upon error about template placeholder type non followed
by a simple declarator-id.
/testsuite
2019-05-06 Paolo Carlini <paolo.carlini@oracle.com>
PR c++/90173
* g++.dg/cpp1z/class-deduction66.C: New.
From-SVN: r270915
2019-05-06 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-05-06 Martin Liska <mliska@suse.cz>
PR sanitizer/90312
* config/i386/i386-options.c (ix86_option_override_internal): Error only
when -mabi is selected to a non-default version.
2019-05-06 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-05-06 Martin Liska <mliska@suse.cz>
PR sanitizer/90312
* gcc.dg/asan/pr87930.c: Run the test only on *linux or *gnu
systems.
* gcc.dg/tsan/pr88017.c: Likewise.
From-SVN: r270912
2019-05-03 Richard Biener <rguenther@suse.de>
PR tree-optimization/90316
* tree-ssa-pre.c (pass_pre::execute): Re-compute DOM fast queries
before running VN.
From-SVN: r270849
Fix assembly errors:
.../libphobos/src/std/math.d: Assembler messages:.../libphobos/src/std/math.d:4773: Error: unrecognized opcode `frflags a0'.../libphobos/src/std/math.d:4856: Error: unrecognized opcode `fsflags a5'.../libphobos/src/std/math.d:4856: Error: unrecognized opcode `fsflags a5'.../libphobos/src/std/math.d:4773: Error: unrecognized opcode `frflags a0'.../libphobos/src/std/math.d:5549: Error: unrecognized opcode `fscsr a5'.../libphobos/src/std/math.d:5456: Error: unrecognized opcode `frcsr a5'.../libphobos/src/std/math.d:5456: Error: unrecognized opcode `frcsr a5'.../libphobos/src/std/math.d:5549: Error: unrecognized opcode `fscsr a5'.../libphobos/src/std/math.d:5456: Error: unrecognized opcode `frcsr a5'.../libphobos/src/std/math.d:5549: Error: unrecognized opcode `fscsr a0'.../libphobos/src/std/math.d:5456: Error: unrecognized opcode `frcsr a0'.../libphobos/src/std/math.d:5456: Error: unrecognized opcode `frcsr a0'.../libphobos/src/std/math.d:5549: Error: unrecognized opcode `fscsr s2'make[8]: *** [Makefile:1119: std/math.lo] Error 1
triggered with the RISC-V lp64 multilib in a GCC build configured with
`--enable-multilib --enable-languages=all --target=riscv64-linux-gnu'.
This is due to unconditional explicit use of F extension instructions
within inline assembly, to access IEEE exception flags. The use of
these instructions is not allowed when building for a soft-float ABI.
Correct the problem by wrapping said inline assembly into a conditional
such that if `D_SoftFloat' is true, then reads from IEEE exception flags
return 0 and writes are ignored instead, complementing r270522
("libphobos: Add D support for RISC-V Linux"), which is an updated
version of <https://gcc.gnu.org/ml/gcc-patches/2019-04/msg00325.html>,
where the problematic code has originated from.
libphobos/ChangeLog:
2019-05-02 Maciej Rozycki <macro@wdc.com>
* std/math.d (IeeeFlags.getIeeeFlags): Handle RISC-V soft-float ABI.
(IeeeFlags.resetIeeeFlags): Likewise.
(FloatingPointControl.getControlState): Likewise.
(FloatingPointControl.setControlState): Likewise.
From-SVN: r270816
This keeps coming up repeatedly and the ACLE has finally added
__ARM_FEATURE_ATOMICS for the LSE feature in GCC. This is now part of
the latest ACLE release
(https://developer.arm.com/docs/101028/latest/5-feature-test-macros)
I know it's late for GCC-9 but this is a simple macro which need not
wait for another year.
Ok for trunk and to backport to all release branches ?
Tested with a simple build and a smoke test.
Backport from mainline.
PR target/86538
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
__ARM_FEATURE_ATOMICS
From-SVN: r270689
2019-04-30 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-04-27 Martin Liska <mliska@suse.cz>
PR middle-end/90258
* opt-suggestions.c (option_proposer::build_option_suggestions):
When get_valid_option_values returns empty values, add the
misspelling candidate.
2019-04-30 Martin Liska <mliska@suse.cz>
Backport from mainline
2019-04-27 Martin Liska <mliska@suse.cz>
PR middle-end/90258
* gcc.dg/completion-5.c: New test.
* gcc.target/i386/spellcheck-options-5.c: New test.
From-SVN: r270676
The pmr::string typedef isn't available for the old COW string, so some
tests that use it were failing.
Backport from mainline
2019-04-26 Jonathan Wakely <jwakely@redhat.com>
* testsuite/20_util/variant/run.cc: Use a new Hashable type to test
hashing, because pmr::string depends on _GLIBCXX_USE_CXX11_ABI==1.
* testsuite/21_strings/basic_string/hash/hash.cc
[!_GLIBCXX_USE_CXX11_ABI]: Don't test pmr strings.
* testsuite/21_strings/basic_string/hash/hash_char8_t.cc
[!_GLIBCXX_USE_CXX11_ABI]: Likewise.
From-SVN: r270612
As discussed in the thread starting at
https://gcc.gnu.org/ml/libstdc++/2019-04/msg00140.html
* config/abi/pre/gnu.ver (GLIBCXX_3.4): Replace wildcard that matches
wstring::_M_replace_dispatch with more specific patterns.
From-SVN: r270611
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.