buildroot

Files

T

Vincent Stehlé fdea0d10dc board/pine64/rockpro64: add TF-A hash

We have no more hash file for TF-A v2.11 in the package directory since
commit 24615d1502 ("boot/arm-trusted-firmware: bump to v2.12"); add
one in our global patches directory.

This fixes the following warning:

  WARNING: no hash file for arm-trusted-firmware-v2.11-git4.tar.gz

Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>

2024-12-17 19:16:31 +01:00

patches

board/pine64/rockpro64: add TF-A hash

2024-12-17 19:16:31 +01:00

extlinux.conf

configs/rockpro64: bump ATF to 2.9, U-Boot to 2023.07 and Linux to 6.5.7

2023-11-02 18:48:12 +01:00

genimage.cfg

board/*/genimage.cfg: use partition-type-uuid = F for some FAT partitions

2022-07-23 15:36:22 +02:00

linux.fragment

board/pine64/rockpro64/linux.fragment: integrate stmmac driver

2024-07-09 22:30:19 +02:00

post-build.sh

configs/rockpro64: bump Linux kernel, U-Boot and TF-A

2024-10-22 22:56:15 +02:00

readme.txt

configs/rockpro64: new defconfig

2020-09-02 22:40:41 +02:00

readme.txt

PINE64 ROCKPro64
================
https://www.pine64.org/rockpro64/

Build:
======
  $ make rockpro64_defconfig
  $ make

Files created in output directory
=================================

output/images

├── bl31.elf
├── boot.vfat
├── extlinux
├── idbloader.img
├── Image
├── rk3399-rockpro64.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── rootfs.tar
├── sdcard.img
├── u-boot.bin
└── u-boot.itb

Creating bootable SD card:
==========================

Simply invoke (as root)

sudo dd if=output/images/sdcard.img of=/dev/sdX && sync

Where X is your SD card device.

Booting:
========
RockPro64 has a 40-pin PI-2 GPIO Bus.

Connect a jumper between pin 23 and pin 25 for SD card boot.

Serial console:
---------------
The pin layout for serial console on PI-2 GPIO Bus is as follows:

pin 6:  gnd
pin 8:  tx
pin 10: rx

Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the
power is on then connect pin 10(receive).

Baudrate for this board is 1500000.

Login:
------
Enter 'root' as login user, and the prompt is ready.

https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html