buildroot

Files

T

Mattia Narducci 1acb0e5fec board/pine64/pine64: use offset to specify boot partition alignment

Use the 'offset' property in genimage.cfg to align the boot partition on
1 MiB boundary. It is clearer than fixing the size of the previous
u-boot partition.

Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Mattia Narducci <mattianarducci1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

2024-10-28 22:44:39 +01:00

boot.cmd

…

genimage.cfg

board/pine64/pine64: use offset to specify boot partition alignment

2024-10-28 22:44:39 +01:00

readme.txt

…

readme.txt

Intro
=====

This default configuration will allow you to start experimenting with the
buildroot environment for the Pine64. With the current configuration
it will bring-up the board, and allow access through the serial console.

Pine64 link:
https://www.pine64.org/?page_id=1194

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Pine64

This configuration uses U-Boot mainline and kernel mainline.

How to build
============

    $ make pine64_defconfig

    $ make

Note: you will need access to the internet to download the required
sources.

How to write the SD card
========================

Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.

Copy the bootable "sdcard.img" onto an SD card with "dd":

  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
  $ sudo sync

Insert the micro SDcard in your Pine64 and power it up. The console
is on the serial line, 115200 8N1.