d2cd795c4ece1a24fda170c35eeb4f17d9826cbb
873808
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Laurent Pinchart
|
cf0c4eb15e |
drm/panel: nec-nl8048hl11: Fix SPI alias
The panel-nec-nl8048hl11 driver incorrectly includes the OF vendor
prefix in its SPI alias. Fix it, and move the manual alias to an SPI
module device table.
Fixes:
|
||
|
Laurent Pinchart
|
19305134ad |
drm/panel: lg-lb035q02: Fix SPI alias
The panel-lg-lb035q02 driver incorrectly includes the OF vendor prefix
in its SPI alias. Fix it, and move the manual alias to an SPI module
device table.
Fixes:
|
||
|
Pavel Begunkov
|
6805b32ec2 |
io_uring: remove wait loop spurious wakeups
Any changes interesting to tasks waiting in io_cqring_wait() are commited with io_cqring_ev_posted(). However, io_ring_drop_ctx_refs() also tries to do that but with no reason, that means spurious wakeups every io_free_req() and io_uring_enter(). Just use percpu_ref_put() instead. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
eda57a0e42 |
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton: "The usual shower of hotfixes. Chris's memcg patches aren't actually fixes - they're mature but a few niggling review issues were late to arrive. The ocfs2 fixes are quite old - those took some time to get reviewer attention. Subsystems affected by this patch series: ocfs2, hotfixes, mm/memcg, mm/slab-generic" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two) mm, sl[ou]b: improve memory accounting mm, memcg: make scan aggression always exclude protection mm, memcg: make memory.emin the baseline for utilisation determination mm, memcg: proportional memory.{low,min} reclaim mm/vmpressure.c: fix a signedness bug in vmpressure_register_event() mm/page_alloc.c: fix a crash in free_pages_prepare() mm/z3fold.c: claim page in the beginning of free kernel/sysctl.c: do not override max_threads provided by userspace memcg: only record foreign writebacks with dirty pages when memcg is not disabled mm: fix -Wmissing-prototypes warnings writeback: fix use-after-free in finish_writeback_work() mm/memremap: drop unused SECTION_SIZE and SECTION_MASK panic: ensure preemption is disabled during panic() fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc() fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock() fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry() ocfs2: clear zero in unaligned direct IO |
||
|
Vlastimil Babka
|
59bb47985c |
mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)
In most configurations, kmalloc() happens to return naturally aligned (i.e. aligned to the block size itself) blocks for power of two sizes. That means some kmalloc() users might unknowingly rely on that alignment, until stuff breaks when the kernel is built with e.g. CONFIG_SLUB_DEBUG or CONFIG_SLOB, and blocks stop being aligned. Then developers have to devise workaround such as own kmem caches with specified alignment [1], which is not always practical, as recently evidenced in [2]. The topic has been discussed at LSF/MM 2019 [3]. Adding a 'kmalloc_aligned()' variant would not help with code unknowingly relying on the implicit alignment. For slab implementations it would either require creating more kmalloc caches, or allocate a larger size and only give back part of it. That would be wasteful, especially with a generic alignment parameter (in contrast with a fixed alignment to size). Ideally we should provide to mm users what they need without difficult workarounds or own reimplementations, so let's make the kmalloc() alignment to size explicitly guaranteed for power-of-two sizes under all configurations. What this means for the three available allocators? * SLAB object layout happens to be mostly unchanged by the patch. The implicitly provided alignment could be compromised with CONFIG_DEBUG_SLAB due to redzoning, however SLAB disables redzoning for caches with alignment larger than unsigned long long. Practically on at least x86 this includes kmalloc caches as they use cache line alignment, which is larger than that. Still, this patch ensures alignment on all arches and cache sizes. * SLUB layout is also unchanged unless redzoning is enabled through CONFIG_SLUB_DEBUG and boot parameter for the particular kmalloc cache. With this patch, explicit alignment is guaranteed with redzoning as well. This will result in more memory being wasted, but that should be acceptable in a debugging scenario. * SLOB has no implicit alignment so this patch adds it explicitly for kmalloc(). The potential downside is increased fragmentation. While pathological allocation scenarios are certainly possible, in my testing, after booting a x86_64 kernel+userspace with virtme, around 16MB memory was consumed by slab pages both before and after the patch, with difference in the noise. [1] https://lore.kernel.org/linux-btrfs/c3157c8e8e0e7588312b40c853f65c02fe6c957a.1566399731.git.christophe.leroy@c-s.fr/ [2] https://lore.kernel.org/linux-fsdevel/20190225040904.5557-1-ming.lei@redhat.com/ [3] https://lwn.net/Articles/787740/ [akpm@linux-foundation.org: documentation fixlet, per Matthew] Link: http://lkml.kernel.org/r/20190826111627.7505-3-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: David Sterba <dsterba@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
6a486c0ad4 |
mm, sl[ou]b: improve memory accounting
Patch series "guarantee natural alignment for kmalloc()", v2. This patch (of 2): SLOB currently doesn't account its pages at all, so in /proc/meminfo the Slab field shows zero. Modifying a counter on page allocation and freeing should be acceptable even for the small system scenarios SLOB is intended for. Since reclaimable caches are not separated in SLOB, account everything as unreclaimable. SLUB currently doesn't account kmalloc() and kmalloc_node() allocations larger than order-1 page, that are passed directly to the page allocator. As they also don't appear in /proc/slabinfo, it might look like a memory leak. For consistency, account them as well. (SLAB doesn't actually use page allocator directly, so no change there). Ideally SLOB and SLUB would be handled in separate patches, but due to the shared kmalloc_order() function and different kfree() implementations, it's easier to patch both at once to prevent inconsistencies. Link: http://lkml.kernel.org/r/20190826111627.7505-2-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Darrick J . Wong" <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Down
|
1bc63fb127 |
mm, memcg: make scan aggression always exclude protection
This patch is an incremental improvement on the existing
memory.{low,min} relative reclaim work to base its scan pressure
calculations on how much protection is available compared to the current
usage, rather than how much the current usage is over some protection
threshold.
This change doesn't change the experience for the user in the normal
case too much. One benefit is that it replaces the (somewhat arbitrary)
100% cutoff with an indefinite slope, which makes it easier to ballpark
a memory.low value.
As well as this, the old methodology doesn't quite apply generically to
machines with varying amounts of physical memory. Let's say we have a
top level cgroup, workload.slice, and another top level cgroup,
system-management.slice. We want to roughly give 12G to
system-management.slice, so on a 32GB machine we set memory.low to 20GB
in workload.slice, and on a 64GB machine we set memory.low to 52GB.
However, because these are relative amounts to the total machine size,
while the amount of memory we want to generally be willing to yield to
system.slice is absolute (12G), we end up putting more pressure on
system.slice just because we have a larger machine and a larger workload
to fill it, which seems fairly unintuitive. With this new behaviour, we
don't end up with this unintended side effect.
Previously the way that memory.low protection works is that if you are
50% over a certain baseline, you get 50% of your normal scan pressure.
This is certainly better than the previous cliff-edge behaviour, but it
can be improved even further by always considering memory under the
currently enforced protection threshold to be out of bounds. This means
that we can set relatively low memory.low thresholds for variable or
bursty workloads while still getting a reasonable level of protection,
whereas with the previous version we may still trivially hit the 100%
clamp. The previous 100% clamp is also somewhat arbitrary, whereas this
one is more concretely based on the currently enforced protection
threshold, which is likely easier to reason about.
There is also a subtle issue with the way that proportional reclaim
worked previously -- it promotes having no memory.low, since it makes
pressure higher during low reclaim. This happens because we base our
scan pressure modulation on how far memory.current is between memory.min
and memory.low, but if memory.low is unset, we only use the overage
method. In most cromulent configurations, this then means that we end
up with *more* pressure than with no memory.low at all when we're in low
reclaim, which is not really very usable or expected.
With this patch, memory.low and memory.min affect reclaim pressure in a
more understandable and composable way. For example, from a user
standpoint, "protected" memory now remains untouchable from a reclaim
aggression standpoint, and users can also have more confidence that
bursty workloads will still receive some amount of guaranteed
protection.
Link: http://lkml.kernel.org/r/20190322160307.GA3316@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Chris Down
|
9de7ca46ad |
mm, memcg: make memory.emin the baseline for utilisation determination
Roman points out that when when we do the low reclaim pass, we scale the reclaim pressure relative to position between 0 and the maximum protection threshold. However, if the maximum protection is based on memory.elow, and memory.emin is above zero, this means we still may get binary behaviour on second-pass low reclaim. This is because we scale starting at 0, not starting at memory.emin, and since we don't scan at all below emin, we end up with cliff behaviour. This should be a fairly uncommon case since usually we don't go into the second pass, but it makes sense to scale our low reclaim pressure starting at emin. You can test this by catting two large sparse files, one in a cgroup with emin set to some moderate size compared to physical RAM, and another cgroup without any emin. In both cgroups, set an elow larger than 50% of physical RAM. The one with emin will have less page scanning, as reclaim pressure is lower. Rebase on top of and apply the same idea as what was applied to handle cgroup_memory=disable properly for the original proportional patch http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name ("mm, memcg: Handle cgroup_disable=memory when getting memcg protection"). Link: http://lkml.kernel.org/r/20190201051810.GA18895@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Suggested-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chris Down
|
9783aa9917 |
mm, memcg: proportional memory.{low,min} reclaim
cgroup v2 introduces two memory protection thresholds: memory.low (best-effort) and memory.min (hard protection). While they generally do what they say on the tin, there is a limitation in their implementation that makes them difficult to use effectively: that cliff behaviour often manifests when they become eligible for reclaim. This patch implements more intuitive and usable behaviour, where we gradually mount more reclaim pressure as cgroups further and further exceed their protection thresholds. This cliff edge behaviour happens because we only choose whether or not to reclaim based on whether the memcg is within its protection limits (see the use of mem_cgroup_protected in shrink_node), but we don't vary our reclaim behaviour based on this information. Imagine the following timeline, with the numbers the lruvec size in this zone: 1. memory.low=1000000, memory.current=999999. 0 pages may be scanned. 2. memory.low=1000000, memory.current=1000000. 0 pages may be scanned. 3. memory.low=1000000, memory.current=1000001. 1000001* pages may be scanned. (?!) * Of course, we won't usually scan all available pages in the zone even without this patch because of scan control priority, over-reclaim protection, etc. However, as shown by the tests at the end, these techniques don't sufficiently throttle such an extreme change in input, so cliff-like behaviour isn't really averted by their existence alone. Here's an example of how this plays out in practice. At Facebook, we are trying to protect various workloads from "system" software, like configuration management tools, metric collectors, etc (see this[0] case study). In order to find a suitable memory.low value, we start by determining the expected memory range within which the workload will be comfortable operating. This isn't an exact science -- memory usage deemed "comfortable" will vary over time due to user behaviour, differences in composition of work, etc, etc. As such we need to ballpark memory.low, but doing this is currently problematic: 1. If we end up setting it too low for the workload, it won't have *any* effect (see discussion above). The group will receive the full weight of reclaim and won't have any priority while competing with the less important system software, as if we had no memory.low configured at all. 2. Because of this behaviour, we end up erring on the side of setting it too high, such that the comfort range is reliably covered. However, protected memory is completely unavailable to the rest of the system, so we might cause undue memory and IO pressure there when we *know* we have some elasticity in the workload. 3. Even if we get the value totally right, smack in the middle of the comfort zone, we get extreme jumps between no pressure and full pressure that cause unpredictable pressure spikes in the workload due to the current binary reclaim behaviour. With this patch, we can set it to our ballpark estimation without too much worry. Any undesirable behaviour, such as too much or too little reclaim pressure on the workload or system will be proportional to how far our estimation is off. This means we can set memory.low much more conservatively and thus waste less resources *without* the risk of the workload falling off a cliff if we overshoot. As a more abstract technical description, this unintuitive behaviour results in having to give high-priority workloads a large protection buffer on top of their expected usage to function reliably, as otherwise we have abrupt periods of dramatically increased memory pressure which hamper performance. Having to set these thresholds so high wastes resources and generally works against the principle of work conservation. In addition, having proportional memory reclaim behaviour has other benefits. Most notably, before this patch it's basically mandatory to set memory.low to a higher than desirable value because otherwise as soon as you exceed memory.low, all protection is lost, and all pages are eligible to scan again. By contrast, having a gradual ramp in reclaim pressure means that you now still get some protection when thresholds are exceeded, which means that one can now be more comfortable setting memory.low to lower values without worrying that all protection will be lost. This is important because workingset size is really hard to know exactly, especially with variable workloads, so at least getting *some* protection if your workingset size grows larger than you expect increases user confidence in setting memory.low without a huge buffer on top being needed. Thanks a lot to Johannes Weiner and Tejun Heo for their advice and assistance in thinking about how to make this work better. In testing these changes, I intended to verify that: 1. Changes in page scanning become gradual and proportional instead of binary. To test this, I experimented stepping further and further down memory.low protection on a workload that floats around 19G workingset when under memory.low protection, watching page scan rates for the workload cgroup: +------------+-----------------+--------------------+--------------+ | memory.low | test (pgscan/s) | control (pgscan/s) | % of control | +------------+-----------------+--------------------+--------------+ | 21G | 0 | 0 | N/A | | 17G | 867 | 3799 | 23% | | 12G | 1203 | 3543 | 34% | | 8G | 2534 | 3979 | 64% | | 4G | 3980 | 4147 | 96% | | 0 | 3799 | 3980 | 95% | +------------+-----------------+--------------------+--------------+ As you can see, the test kernel (with a kernel containing this patch) ramps up page scanning significantly more gradually than the control kernel (without this patch). 2. More gradual ramp up in reclaim aggression doesn't result in premature OOMs. To test this, I wrote a script that slowly increments the number of pages held by stress(1)'s --vm-keep mode until a production system entered severe overall memory contention. This script runs in a highly protected slice taking up the majority of available system memory. Watching vmstat revealed that page scanning continued essentially nominally between test and control, without causing forward reclaim progress to become arrested. [0]: https://facebookmicrosites.github.io/cgroup2/docs/overview.html#case-study-the-fbtax2-project [akpm@linux-foundation.org: reflow block comments to fit in 80 cols] [chris@chrisdown.name: handle cgroup_disable=memory when getting memcg protection] Link: http://lkml.kernel.org/r/20190201045711.GA18302@chrisdown.name Link: http://lkml.kernel.org/r/20190124014455.GA6396@chrisdown.name Signed-off-by: Chris Down <chris@chrisdown.name> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dan Carpenter
|
518a867130 |
mm/vmpressure.c: fix a signedness bug in vmpressure_register_event()
The "mode" and "level" variables are enums and in this context GCC will
treat them as unsigned ints so the error handling is never triggered.
I also removed the bogus initializer because it isn't required any more
and it's sort of confusing.
[akpm@linux-foundation.org: reduce implicit and explicit typecasting]
[akpm@linux-foundation.org: fix return value, add comment, per Matthew]
Link: http://lkml.kernel.org/r/20190925110449.GO3264@mwanda
Fixes:
|
||
|
Qian Cai
|
234fdce892 |
mm/page_alloc.c: fix a crash in free_pages_prepare()
On architectures like s390, arch_free_page() could mark the page unused
(set_page_unused()) and any access later would trigger a kernel panic.
Fix it by moving arch_free_page() after all possible accessing calls.
Hardware name: IBM 2964 N96 400 (z/VM 6.4.0)
Krnl PSW : 0404e00180000000 0000000026c2b96e (__free_pages_ok+0x34e/0x5d8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000088d43af7 0000000000484000 000000000000007c 000000000000000f
000003d080012100 000003d080013fc0 0000000000000000 0000000000100000
00000000275cca48 0000000000000100 0000000000000008 000003d080010000
00000000000001d0 000003d000000000 0000000026c2b78a 000000002717fdb0
Krnl Code: 0000000026c2b95c: ec1100b30659 risbgn %r1,%r1,0,179,6
0000000026c2b962: e32014000036 pfd 2,1024(%r1)
#0000000026c2b968: d7ff10001000 xc 0(256,%r1),0(%r1)
>0000000026c2b96e: 41101100 la %r1,256(%r1)
0000000026c2b972: a737fff8 brctg %r3,26c2b962
0000000026c2b976: d7ff10001000 xc 0(256,%r1),0(%r1)
0000000026c2b97c: e31003400004 lg %r1,832
0000000026c2b982: ebff1430016a asi 5168(%r1),-1
Call Trace:
__free_pages_ok+0x16a/0x5d8)
memblock_free_all+0x206/0x290
mem_init+0x58/0x120
start_kernel+0x2b0/0x570
startup_continue+0x6a/0xc0
INFO: lockdep is turned off.
Last Breaking-Event-Address:
__free_pages_ok+0x372/0x5d8
Kernel panic - not syncing: Fatal exception: panic_on_oops
00: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 26A2379C
In the past, only kernel_poison_pages() would trigger this but it needs
"page_poison=on" kernel cmdline, and I suspect nobody tested that on
s390. Recently, kernel_init_free_pages() (commit
|
||
|
Vitaly Wool
|
5b6807de11 |
mm/z3fold.c: claim page in the beginning of free
There's a really hard to reproduce race in z3fold between z3fold_free() and z3fold_reclaim_page(). z3fold_reclaim_page() can claim the page after z3fold_free() has checked if the page was claimed and z3fold_free() will then schedule this page for compaction which may in turn lead to random page faults (since that page would have been reclaimed by then). Fix that by claiming page in the beginning of z3fold_free() and not forgetting to clear the claim in the end. [vitalywool@gmail.com: v2] Link: http://lkml.kernel.org/r/20190928113456.152742cf@bigdell Link: http://lkml.kernel.org/r/20190926104844.4f0c6efa1366b8f5741eaba9@gmail.com Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Reported-by: Markus Linnala <markus.linnala@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Markus Linnala <markus.linnala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michal Hocko
|
b0f53dbc4b |
kernel/sysctl.c: do not override max_threads provided by userspace
Partially revert |
||
|
Baoquan He
|
08d1d0e6d0 |
memcg: only record foreign writebacks with dirty pages when memcg is not disabled
In kdump kernel, memcg usually is disabled with 'cgroup_disable=memory' for saving memory. Now kdump kernel will always panic when dump vmcore to local disk: BUG: kernel NULL pointer dereference, address: 0000000000000ab8 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 598 Comm: makedumpfile Not tainted 5.3.0+ #26 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018 RIP: 0010:mem_cgroup_track_foreign_dirty_slowpath+0x38/0x140 Call Trace: __set_page_dirty+0x52/0xc0 iomap_set_page_dirty+0x50/0x90 iomap_write_end+0x6e/0x270 iomap_write_actor+0xce/0x170 iomap_apply+0xba/0x11e iomap_file_buffered_write+0x62/0x90 xfs_file_buffered_aio_write+0xca/0x320 [xfs] new_sync_write+0x12d/0x1d0 vfs_write+0xa5/0x1a0 ksys_write+0x59/0xd0 do_syscall_64+0x59/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 And this will corrupt the 1st kernel too with 'cgroup_disable=memory'. Via the trace and with debugging, it is pointing to commit |
||
|
Yi Wang
|
758b8db4a5 |
mm: fix -Wmissing-prototypes warnings
We get two warnings when build kernel W=1: mm/shuffle.c:36:12: warning: no previous prototype for `shuffle_show' [-Wmissing-prototypes] mm/sparse.c:220:6: warning: no previous prototype for `subsection_mask_set' [-Wmissing-prototypes] Make the functions static to fix this. Link: http://lkml.kernel.org/r/1566978161-7293-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tejun Heo
|
8e00c4e9dd |
writeback: fix use-after-free in finish_writeback_work()
finish_writeback_work() reads @done->waitq after decrementing
@done->cnt. However, once @done->cnt reaches zero, @done may be freed
(from stack) at any moment and @done->waitq can contain something
unrelated by the time finish_writeback_work() tries to read it. This
led to the following crash.
"BUG: kernel NULL pointer dereference, address: 0000000000000002"
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
CPU: 40 PID: 555153 Comm: kworker/u98:50 Kdump: loaded Not tainted
...
Workqueue: writeback wb_workfn (flush-btrfs-1)
RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30
Code: 48 89 d8 5b c3 e8 50 db 6b ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 fe ca 6b ff eb f2 66 90
RSP: 0018:ffffc90049b27d98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffff889fff407600 R11: ffff88ba9395d740 R12: 000000000000e300
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88bfdfa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000002 CR3: 0000000002409005 CR4: 00000000001606e0
Call Trace:
__wake_up_common_lock+0x63/0xc0
wb_workfn+0xd2/0x3e0
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
kthread+0x111/0x130
ret_from_fork+0x1f/0x30
Fix it by reading and caching @done->waitq before decrementing
@done->cnt.
Link: http://lkml.kernel.org/r/20190924010631.GH2233839@devbig004.ftw2.facebook.com
Fixes:
|
||
|
Anshuman Khandual
|
6d0e984941 |
mm/memremap: drop unused SECTION_SIZE and SECTION_MASK
SECTION_SIZE and SECTION_MASK macros are not getting used anymore. But they do conflict with existing definitions on arm64 platform causing following warning during build. Lets drop these unused macros. mm/memremap.c:16: warning: "SECTION_MASK" redefined #define SECTION_MASK ~((1UL << PA_SECTION_SHIFT) - 1) arch/arm64/include/asm/pgtable-hwdef.h:79: note: this is the location of the previous definition #define SECTION_MASK (~(SECTION_SIZE-1)) mm/memremap.c:17: warning: "SECTION_SIZE" redefined #define SECTION_SIZE (1UL << PA_SECTION_SHIFT) arch/arm64/include/asm/pgtable-hwdef.h:78: note: this is the location of the previous definition #define SECTION_SIZE (_AC(1, UL) << SECTION_SHIFT) Link: http://lkml.kernel.org/r/1569312010-31313-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Will Deacon
|
20bb759a66 |
panic: ensure preemption is disabled during panic()
Calling 'panic()' on a kernel with CONFIG_PREEMPT=y can leave the calling CPU in an infinite loop, but with interrupts and preemption enabled. From this state, userspace can continue to be scheduled, despite the system being "dead" as far as the kernel is concerned. This is easily reproducible on arm64 when booting with "nosmp" on the command line; a couple of shell scripts print out a periodic "Ping" message whilst another triggers a crash by writing to /proc/sysrq-trigger: | sysrq: Trigger a crash | Kernel panic - not syncing: sysrq triggered crash | CPU: 0 PID: 1 Comm: init Not tainted 5.2.15 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x148 | show_stack+0x14/0x20 | dump_stack+0xa0/0xc4 | panic+0x140/0x32c | sysrq_handle_reboot+0x0/0x20 | __handle_sysrq+0x124/0x190 | write_sysrq_trigger+0x64/0x88 | proc_reg_write+0x60/0xa8 | __vfs_write+0x18/0x40 | vfs_write+0xa4/0x1b8 | ksys_write+0x64/0xf0 | __arm64_sys_write+0x14/0x20 | el0_svc_common.constprop.0+0xb0/0x168 | el0_svc_handler+0x28/0x78 | el0_svc+0x8/0xc | Kernel Offset: disabled | CPU features: 0x0002,24002004 | Memory Limit: none | ---[ end Kernel panic - not syncing: sysrq triggered crash ]--- | Ping 2! | Ping 1! | Ping 1! | Ping 2! The issue can also be triggered on x86 kernels if CONFIG_SMP=n, otherwise local interrupts are disabled in 'smp_send_stop()'. Disable preemption in 'panic()' before re-enabling interrupts. Link: http://lkml.kernel.org/r/20191002123538.22609-1-will@kernel.org Link: https://lore.kernel.org/r/BX1W47JXPMR8.58IYW53H6M5N@dragonstone Signed-off-by: Will Deacon <will@kernel.org> Reported-by: Xogium <contact@xogium.me> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Feng Tang <feng.tang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jia-Ju Bai
|
2abb7d3b12 |
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_info_scan_inode_alloc()
In ocfs2_info_scan_inode_alloc(), there is an if statement on line 283
to check whether inode_alloc is NULL:
if (inode_alloc)
When inode_alloc is NULL, it is used on line 287:
ocfs2_inode_lock(inode_alloc, &bh, 0);
ocfs2_inode_lock_full_nested(inode, ...)
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
Thus, a possible null-pointer dereference may occur.
To fix this bug, inode_alloc is checked on line 286.
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033717.32359-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Jia-Ju Bai
|
583fee3e12 |
fs: ocfs2: fix a possible null-pointer dereference in ocfs2_write_end_nolock()
In ocfs2_write_end_nolock(), there are an if statement on lines 1976,
2047 and 2058, to check whether handle is NULL:
if (handle)
When handle is NULL, it is used on line 2045:
ocfs2_update_inode_fsync_trans(handle, inode, 1);
oi->i_sync_tid = handle->h_transaction->t_tid;
Thus, a possible null-pointer dereference may occur.
To fix this bug, handle is checked before calling
ocfs2_update_inode_fsync_trans().
This bug is found by a static analysis tool STCheck written by us.
Link: http://lkml.kernel.org/r/20190726033705.32307-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Jia-Ju Bai
|
56e94ea132 |
fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()
In ocfs2_xa_prepare_entry(), there is an if statement on line 2136 to
check whether loc->xl_entry is NULL:
if (loc->xl_entry)
When loc->xl_entry is NULL, it is used on line 2158:
ocfs2_xa_add_entry(loc, name_hash);
loc->xl_entry->xe_name_hash = cpu_to_le32(name_hash);
loc->xl_entry->xe_name_offset = cpu_to_le16(loc->xl_size);
and line 2164:
ocfs2_xa_add_namevalue(loc, xi);
loc->xl_entry->xe_value_size = cpu_to_le64(xi->xi_value_len);
loc->xl_entry->xe_name_len = xi->xi_name_len;
Thus, possible null-pointer dereferences may occur.
To fix these bugs, if loc-xl_entry is NULL, ocfs2_xa_prepare_entry()
abnormally returns with -EINVAL.
These bugs are found by a static analysis tool STCheck written by us.
[akpm@linux-foundation.org: remove now-unused ocfs2_xa_add_entry()]
Link: http://lkml.kernel.org/r/20190726101447.9153-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Jia Guo
|
7a243c82ea |
ocfs2: clear zero in unaligned direct IO
Unused portion of a part-written fs-block-sized block is not set to zero in unaligned append direct write.This can lead to serious data inconsistencies. Ocfs2 manage disk with cluster size(for example, 1M), part-written in one cluster will change the cluster state from UN-WRITTEN to WRITTEN, VFS(function dio_zero_block) doesn't do the cleaning because bh's state is not set to NEW in function ocfs2_dio_wr_get_block when we write a WRITTEN cluster. For example, the cluster size is 1M, file size is 8k and we direct write from 14k to 15k, then 12k~14k and 15k~16k will contain dirty data. We have to deal with two cases: 1.The starting position of direct write is outside the file. 2.The starting position of direct write is located in the file. We need set bh's state to NEW in the first case. In the second case, we need mapped twice because bh's state of area out file should be set to NEW while area in file not. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/5292e287-8f1a-fd4a-1a14-661e555e0bed@huawei.com Signed-off-by: Jia Guo <guojia12@huawei.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Boris Ostrovsky
|
c6875f3aac |
x86/xen: Return from panic notifier
Currently execution of panic() continues until Xen's panic notifier (xen_panic_event()) is called at which point we make a hypercall that never returns. This means that any notifier that is supposed to be called later as well as significant part of panic() code (such as pstore writes from kmsg_dump()) is never executed. There is no reason for xen_panic_event() to be this last point in execution since panic()'s emergency_restart() will call into xen_emergency_restart() from where we can perform our hypercall. Nevertheless, we will provide xen_legacy_crash boot option that will preserve original behavior during crash. This option could be used, for example, if running kernel dumper (which happens after panic notifiers) is undesirable. Reported-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> |
||
|
Aaron Komisar
|
dc0c18ed22 |
mac80211: fix scan when operating on DFS channels in ETSI domains
In non-ETSI regulatory domains scan is blocked when operating channel is a DFS channel. For ETSI, however, once DFS channel is marked as available after the CAC, this channel will remain available (for some time) even after leaving this channel. Therefore a scan can be done without any impact on the availability of the DFS channel as no new CAC is required after the scan. Enable scan in mac80211 in these cases. Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com> Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Johannes Berg
|
95697f9907 |
mac80211: accept deauth frames in IBSS mode
We can process deauth frames and all, but we drop them very
early in the RX path today - this could never have worked.
Fixes:
|
||
|
Vincent Chen
|
8bb0daef64 |
riscv: Correct the handling of unexpected ebreak in do_trap_break()
For the kernel space, all ebreak instructions are determined at compile time because the kernel space debugging module is currently unsupported. Hence, it should be treated as a bug if an ebreak instruction which does not belong to BUG_TRAP_TYPE_WARN or BUG_TRAP_TYPE_BUG is executed in kernel space. For the userspace, debugging module or user problem may intentionally insert an ebreak instruction to trigger a SIGTRAP signal. To approach the above two situations, the do_trap_break() will direct the BUG_TRAP_TYPE_NONE ebreak exception issued in kernel space to die() and will send a SIGTRAP to the trapped process only when the ebreak is in userspace. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [paul.walmsley@sifive.com: fixed checkpatch issue] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> |
||
|
Vincent Chen
|
e0c0fc18f1 |
riscv: avoid sending a SIGTRAP to a user thread trapped in WARN()
On RISC-V, when the kernel runs code on behalf of a user thread, and the kernel executes a WARN() or WARN_ON(), the user thread will be sent a bogus SIGTRAP. Fix the RISC-V kernel code to not send a SIGTRAP when a WARN()/WARN_ON() is executed. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [paul.walmsley@sifive.com: fixed subject] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> |
||
|
Vincent Chen
|
8b04825ed2 |
riscv: avoid kernel hangs when trapped in BUG()
When the CONFIG_GENERIC_BUG is disabled by disabling CONFIG_BUG, if a kernel thread is trapped by BUG(), the whole system will be in the loop that infinitely handles the ebreak exception instead of entering the die function. To fix this problem, the do_trap_break() will always call the die() to deal with the break exception as the type of break is BUG_TRAP_TYPE_BUG. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> |
||
|
Linus Torvalds
|
c512c69187 |
uaccess: implement a proper unsafe_copy_to_user() and switch filldir over to it
In commit |
||
|
Sara Sharon
|
461c4c2b4c |
cfg80211: fix a bunch of RCU issues in multi-bssid code
cfg80211_update_notlisted_nontrans() leaves the RCU critical session too early, while still using nontrans_ssid which is RCU protected. In addition, it performs a bunch of RCU pointer update operations such as rcu_access_pointer and rcu_assign_pointer. The caller, cfg80211_inform_bss_frame_data(), also accesses the RCU pointer without holding the lock. Just wrap all of this with bss_lock. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20191004123706.15768-3-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com> |
||
|
Navid Emamdoost
|
1399c59fa9 |
nl80211: fix memory leak in nl80211_get_ftm_responder_stats
In nl80211_get_ftm_responder_stats, a new skb is created via nlmsg_new
named msg. If nl80211hdr_put() fails, then msg should be released. The
return statement should be replace by goto to error handling code.
Fixes:
|
||
|
Antonio Borneo
|
503c9addef |
ptp: fix typo of "mechanism" in Kconfig help text
Fix typo s/mechansim/mechanism/ Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Pierre-Louis Bossart
|
1466327e8e |
ASoC: SOF: support alternate list of machines
For cases where an interface can be pin-muxed, we need to assess at probe time which configuration should be used. In cases such as SoundWire, we need to maintain an alternate list of machines and walk through them when the primary detection based on ACPI _HID fails. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916214251.13130-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Pierre-Louis Bossart
|
af78cec45f |
ASoC: soc-acpi: add link_mask field
When interfaces can be pin-muxed, static information from ACPI might not be enough. Add information on which links needs to be enabled by hardware/firmware for a specific machine driver to be selected. When walking through the list of possible machines, links will be checked, which implies that configurations where multiple links are required need to be checked first. Additional criteria will be needed later, such as which SoundWire Slave devices are actually enabled, but for now this helps detect between basic configurations. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190916214251.13130-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Dan Murphy
|
edd6d53932 |
ASoC: tas2770: Fix snd_soc_update_bits error handling
According the documentation for snd_soc_update_bits the API will return a 1 if the update was successful with a value change, a 0 if the update was successful with no value change or a negative if the command just failed. So the value of return in the driver needs to be checked for being less then 0 or the caller may indicate failure when the value actually changed. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191007171157.17813-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Dan Murphy
|
40f90ef0a7 |
ASoc: tas2770: Remove unused defines and variables
Remove unused defines and structure variables that are not referenced by the code. If these are needed for future enhancements then they should be added at that time. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191007171157.17813-3-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Dan Murphy
|
5911e6729e |
ASoC: tas2770: Remove unneeded read of the TDM_CFG3 register
Remove the unneeded and incorrect read of the TDM_CFG3 register. The read is done but the value is never used. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191007171157.17813-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Chris Wilson
|
b925708f28 |
drm/i915: Mark contents as dirty on a write fault
Since dropping the set-to-gtt-domain in commit |
||
|
Chris Wilson
|
7d0eb51dd9 |
drm/i915: Prevent bonded requests from overtaking each other on preemption
Force bonded requests to run on distinct engines so that they cannot be shuffled onto the same engine where timeslicing will reverse the order. A bonded request will often wait on a semaphore signaled by its master, creating an implicit dependency -- if we ignore that implicit dependency and allow the bonded request to run on the same engine and before its master, we will cause a GPU hang. [Whether it will hang the GPU is debatable, we should keep on timeslicing and each timeslice should be "accidentally" counted as forward progress, in which case it should run but at one-half to one-third speed.] We can prevent this inversion by restricting which engines we allow ourselves to jump to upon preemption, i.e. baking in the arrangement established at first execution. (We should also consider capturing the implicit dependency using i915_sched_add_dependency(), but first we need to think about the constraints that requires on the execution/retirement ordering.) Fixes: |
||
|
Ville Syrjälä
|
dc7890995e |
drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled
The officially validated plane width limit is 4k on skl+, however we already had people using 5k displays before we started to enforce the limit. Also it seems Windows allows 5k resolutions as well (though not sure if they do it with one plane or two). According to hw folks 5k should work with the possible exception of the following features: - Ytile (already limited to 4k) - FP16 (already limited to 4k) - render compression (already limited to 4k) - KVMR sprite and cursor (don't care) - horizontal panning (need to verify this) - pipe and plane scaling (need to verify this) So apart from last two items on that list we are already fine. We should really verify what happens with those last two items but I don't have a 5k display on hand atm so it'll have to wait. In the meantime let's just bump the limit back up to 5k since several users have already been using it without apparent issues. At least we'll be no worse off than we were prior to lowering the limits. Cc: stable@vger.kernel.org Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Tested-by: Leho Kraav <leho@kraav.com> Fixes: |
||
|
Chris Wilson
|
abf5cdcf23 |
drm/i915: Verify the engine after acquiring the active.lock
When using virtual engines, the rq->engine is not stable until we hold the engine->active.lock (as the virtual engine may be exchanged with the sibling). Since commit |
||
|
Chris Wilson
|
c73cdbf804 |
drm/i915: Extend Haswell GT1 PSMI workaround to all
A few times in CI, we have detected a GPU hang on our Haswell GT2 systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a was first introducted, it was applied to all Haswell, but later on we found an erratum that supposedly restricted the issue to GT1 and so constrained it only be applied on GT1. That may have been a mistake... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692 Fixes: |
||
|
Chris Wilson
|
fda9fa19b0 |
drm/i915: Don't mix srcu tag and negative error codes
While srcu may use an integer tag, it does not exclude potential error codes and so may overlap with our own use of -EINTR. Use a separate outparam to store the tag, and report the error code separately. Fixes: |
||
|
Kenneth Graunke
|
282b7fd5f5 |
drm/i915: Whitelist COMMON_SLICE_CHICKEN2
This allows userspace to use "legacy" mode for push constants, where
they are committed at 3DPRIMITIVE or flush time, rather than being
committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11
both use the "legacy" behavior - only Gen9 works in the "new" way.
Conflating push constants with binding tables is painful for userspace,
we would like to be able to avoid doing so.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org
(cherry picked from commit
|
||
|
Chris Wilson
|
6c76a93c45 |
drm/i915: Perform GGTT restore much earlier during resume
As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.
Detected by DMAR faults during resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk
(cherry picked from commit
|
||
|
Chris Wilson
|
93be1bae75 |
drm/i915/execlists: Remove incorrect BUG_ON for schedule-out
As we may unwind incomplete requests (for preemption) prior to processing the CSB and the schedule-out events, we may update rq->engine (resetting it to point back to the parent virtual engine) prior to calling execlists_schedule_out(), invalidating the assertion that the request still points to the inflight engine. (The likelihood of this is increased if the CSB interrupt processing is pushed to the ksoftirqd for being too slow and direct submission overtakes it.) Tvrtko summarised it as: "So unwind from direct submission resets rq->engine and races with process_csb from the tasklet which notices request has actually completed." Reported-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Fixes: |
||
|
Thomas Bogendoerfer
|
88356d0990 |
MIPS: include: Mark __cmpxchg as __always_inline
Commit
|
||
|
Masahiro Yamada
|
df6f0987e5 |
nsdeps: make generated patches independent of locale
scripts/nsdeps automatically generates a patch to add MODULE_IMPORT_NS
tags, and what is nicer, it sorts the lines alphabetically with the
'sort' command. However, the output from the 'sort' command depends on
locale.
For example, I got this:
$ { echo usbstorage; echo usb_storage; } | LANG=en_US.UTF-8 sort
usbstorage
usb_storage
$ { echo usbstorage; echo usb_storage; } | LANG=C sort
usb_storage
usbstorage
So, this means people might potentially send different patches.
This kind of issue was reported in the past, for example,
commit
|
||
|
Masahiro Yamada
|
40997fb879 |
nsdeps: fix hashbang of scripts/nsdeps
This script does not use bash-extension. I am guessing this hashbang was copied from scripts/coccicheck, which really uses bash-extension. /bin/sh is enough for this script. Reviewed-by: Matthias Maennich <maennich@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> |
||
|
Masahiro Yamada
|
d85103ac78 |
kbuild: fix build error of 'make nsdeps' in clean tree
Running 'make nsdeps' in a clean source tree fails as follows: $ make -s clean; make -s defconfig; make nsdeps [ snip ] awk: fatal: cannot open file `init/modules.order' for reading (No such file or directory) make: *** [Makefile;1307: modules.order] Error 2 make: *** Deleting file 'modules.order' make: *** Waiting for unfinished jobs.... The cause of the error is 'make nsdeps' does not build modules at all. Set KBUILD_MODULES to fix it. Reviewed-by: Matthias Maennich <maennich@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> |