d2cd795c4ece1a24fda170c35eeb4f17d9826cbb
14012
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ralph Campbell
|
c18ce674d5 |
mm/hmm: hmm_range_fault() infinite loop
Normally, callers to handle_mm_fault() are supposed to check the
vma->vm_flags first. hmm_range_fault() checks for VM_READ but doesn't
check for VM_WRITE if the caller requests a page to be faulted in with
write permission (via the hmm_range.pfns[] value). If the vma is write
protected, this can result in an infinite loop:
hmm_range_fault()
walk_page_range()
...
hmm_vma_walk_hole()
hmm_vma_walk_hole_()
hmm_vma_do_fault()
handle_mm_fault(FAULT_FLAG_WRITE)
/* returns VM_FAULT_WRITE */
/* returns -EBUSY */
/* returns -EBUSY */
/* returns -EBUSY */
/* loops on -EBUSY and range->valid */
Prevent this by checking for vma->vm_flags & VM_WRITE before calling
handle_mm_fault().
Link: https://lore.kernel.org/r/20190823221753.2514-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
||
|
Ralph Campbell
|
6c64f2bbe7 |
mm/hmm: hmm_range_fault() NULL pointer bug
Although hmm_range_fault() calls find_vma() to make sure that a vma exists
before calling walk_page_range(), hmm_vma_walk_hole() can still be called
with walk->vma == NULL if the start and end address are not contained
within the vma range.
hmm_range_fault() /* calls find_vma() but no range check */
walk_page_range() /* calls find_vma(), sets walk->vma = NULL */
__walk_page_range()
walk_pgd_range()
walk_p4d_range()
walk_pud_range()
hmm_vma_walk_hole()
hmm_vma_walk_hole_()
hmm_vma_do_fault()
handle_mm_fault(vma=0)
Link: https://lore.kernel.org/r/20190823221753.2514-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
||
|
Tejun Heo
|
97b27821b4 |
writeback, memcg: Implement foreign dirty flushing
There's an inherent mismatch between memcg and writeback. The former
trackes ownership per-page while the latter per-inode. This was a
deliberate design decision because honoring per-page ownership in the
writeback path is complicated, may lead to higher CPU and IO overheads
and deemed unnecessary given that write-sharing an inode across
different cgroups isn't a common use-case.
Combined with inode majority-writer ownership switching, this works
well enough in most cases but there are some pathological cases. For
example, let's say there are two cgroups A and B which keep writing to
different but confined parts of the same inode. B owns the inode and
A's memory is limited far below B's. A's dirty ratio can rise enough
to trigger balance_dirty_pages() sleeps but B's can be low enough to
avoid triggering background writeback. A will be slowed down without
a way to make writeback of the dirty pages happen.
This patch implements foreign dirty recording and foreign mechanism so
that when a memcg encounters a condition as above it can trigger
flushes on bdi_writebacks which can clean its pages. Please see the
comment on top of mem_cgroup_track_foreign_dirty_slowpath() for
details.
A reproducer follows.
write-range.c::
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
static const char *usage = "write-range FILE START SIZE\n";
int main(int argc, char **argv)
{
int fd;
unsigned long start, size, end, pos;
char *endp;
char buf[4096];
if (argc < 4) {
fprintf(stderr, usage);
return 1;
}
fd = open(argv[1], O_WRONLY);
if (fd < 0) {
perror("open");
return 1;
}
start = strtoul(argv[2], &endp, 0);
if (*endp != '\0') {
fprintf(stderr, usage);
return 1;
}
size = strtoul(argv[3], &endp, 0);
if (*endp != '\0') {
fprintf(stderr, usage);
return 1;
}
end = start + size;
while (1) {
for (pos = start; pos < end; ) {
long bread, bwritten = 0;
if (lseek(fd, pos, SEEK_SET) < 0) {
perror("lseek");
return 1;
}
bread = read(0, buf, sizeof(buf) < end - pos ?
sizeof(buf) : end - pos);
if (bread < 0) {
perror("read");
return 1;
}
if (bread == 0)
return 0;
while (bwritten < bread) {
long this;
this = write(fd, buf + bwritten,
bread - bwritten);
if (this < 0) {
perror("write");
return 1;
}
bwritten += this;
pos += bwritten;
}
}
}
}
repro.sh::
#!/bin/bash
set -e
set -x
sysctl -w vm.dirty_expire_centisecs=300000
sysctl -w vm.dirty_writeback_centisecs=300000
sysctl -w vm.dirtytime_expire_seconds=300000
echo 3 > /proc/sys/vm/drop_caches
TEST=/sys/fs/cgroup/test
A=$TEST/A
B=$TEST/B
mkdir -p $A $B
echo "+memory +io" > $TEST/cgroup.subtree_control
echo $((1<<30)) > $A/memory.high
echo $((32<<30)) > $B/memory.high
rm -f testfile
touch testfile
fallocate -l 4G testfile
echo "Starting B"
(echo $BASHPID > $B/cgroup.procs
pv -q --rate-limit 70M < /dev/urandom | ./write-range testfile $((2<<30)) $((2<<30))) &
echo "Waiting 10s to ensure B claims the testfile inode"
sleep 5
sync
sleep 5
sync
echo "Starting A"
(echo $BASHPID > $A/cgroup.procs
pv < /dev/urandom | ./write-range testfile 0 $((2<<30)))
v2: Added comments explaining why the specific intervals are being used.
v3: Use 0 @nr when calling cgroup_writeback_by_id() to use best-effort
flushing while avoding possible livelocks.
v4: Use get_jiffies_64() and time_before/after64() instead of raw
jiffies_64 and arthimetic comparisons as suggested by Jan.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
||
|
Tejun Heo
|
ed288dc0d4 |
writeback: Separate out wb_get_lookup() from wb_get_create()
Separate out wb_get_lookup() which doesn't try to create one if there isn't already one from wb_get_create(). This will be used by later patches. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Tejun Heo
|
34f8fe501f |
bdi: Add bdi->id
There currently is no way to universally identify and lookup a bdi without holding a reference and pointer to it. This patch adds an non-recycling bdi->id and implements bdi_get_by_id() which looks up bdis by their ids. This will be used by memcg foreign inode flushing. I left bdi_list alone for simplicity and because while rb_tree does support rcu assignment it doesn't seem to guarantee lossless walk when walk is racing aginst tree rebalance operations. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Andrey Ryabinin
|
00fb24a42a |
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
The code like this:
ptr = kmalloc(size, GFP_KERNEL);
page = virt_to_page(ptr);
offset = offset_in_page(ptr);
kfree(page_address(page) + offset);
may produce false-positive invalid-free reports on the kernel with
CONFIG_KASAN_SW_TAGS=y.
In the example above we lose the original tag assigned to 'ptr', so
kfree() gets the pointer with 0xFF tag. In kfree() we check that 0xFF
tag is different from the tag in shadow hence print false report.
Instead of just comparing tags, do the following:
1) Check that shadow doesn't contain KASAN_TAG_INVALID. Otherwise it's
double-free and it doesn't matter what tag the pointer have.
2) If pointer tag is different from 0xFF, make sure that tag in the
shadow is the same as in the pointer.
Link: http://lkml.kernel.org/r/20190819172540.19581-1-aryabinin@virtuozzo.com
Fixes:
|
||
|
Henry Burns
|
701d678599 |
mm/zsmalloc.c: fix race condition in zs_destroy_pool
In zs_destroy_pool() we call flush_work(&pool->free_work). However, we
have no guarantee that migration isn't happening in the background at
that time.
Since migration can't directly free pages, it relies on free_work being
scheduled to free the pages. But there's nothing preventing an
in-progress migrate from queuing the work *after*
zs_unregister_migration() has called flush_work(). Which would mean
pages still pointing at the inode when we free it.
Since we know at destroy time all objects should be free, no new
migrations can come in (since zs_page_isolate() fails for fully-free
zspages). This means it is sufficient to track a "# isolated zspages"
count by class, and have the destroy logic ensure all such pages have
drained before proceeding. Keeping that state under the class spinlock
keeps the logic straightforward.
In this case a memory leak could lead to an eventual crash if compaction
hits the leaked page. This crash would only occur if people are
changing their zswap backend at runtime (which eventually starts
destruction).
Link: http://lkml.kernel.org/r/20190809181751.219326-2-henryburns@google.com
Fixes:
|
||
|
Henry Burns
|
1a87aa0359 |
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
In zs_page_migrate() we call putback_zspage() after we have finished
migrating all pages in this zspage. However, the return value is
ignored. If a zs_free() races in between zs_page_isolate() and
zs_page_migrate(), freeing the last object in the zspage,
putback_zspage() will leave the page in ZS_EMPTY for potentially an
unbounded amount of time.
To fix this, we need to do the same thing as zs_page_putback() does:
schedule free_work to occur.
To avoid duplicated code, move the sequence to a new
putback_zspage_deferred() function which both zs_page_migrate() and
zs_page_putback() call.
Link: http://lkml.kernel.org/r/20190809181751.219326-1-henryburns@google.com
Fixes:
|
||
|
Vlastimil Babka
|
f7da677bc6 |
mm, page_owner: handle THP splits correctly
THP splitting path is missing the split_page_owner() call that
split_page() has.
As a result, split THP pages are wrongly reported in the page_owner file
as order-9 pages. Furthermore when the former head page is freed, the
remaining former tail pages are not listed in the page_owner file at
all. This patch fixes that by adding the split_page_owner() call into
__split_huge_page().
Link: http://lkml.kernel.org/r/20190820131828.22684-2-vbabka@suse.cz
Fixes:
|
||
|
Roman Gushchin
|
bb65f89b7d |
mm: memcontrol: flush percpu vmevents before releasing memcg
Similar to vmstats, percpu caching of local vmevents leads to an
accumulation of errors on non-leaf levels. This happens because some
leftovers may remain in percpu caches, so that they are never propagated
up by the cgroup tree and just disappear into nonexistence with on
releasing of the memory cgroup.
To fix this issue let's accumulate and propagate percpu vmevents values
before releasing the memory cgroup similar to what we're doing with
vmstats.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Link: http://lkml.kernel.org/r/20190819202338.363363-4-guro@fb.com
Fixes:
|
||
|
Roman Gushchin
|
c350a99ea2 |
mm: memcontrol: flush percpu vmstats before releasing memcg
Percpu caching of local vmstats with the conditional propagation by the
cgroup tree leads to an accumulation of errors on non-leaf levels.
Let's imagine two nested memory cgroups A and A/B. Say, a process
belonging to A/B allocates 100 pagecache pages on the CPU 0. The percpu
cache will spill 3 times, so that 32*3=96 pages will be accounted to A/B
and A atomic vmstat counters, 4 pages will remain in the percpu cache.
Imagine A/B is nearby memory.max, so that every following allocation
triggers a direct reclaim on the local CPU. Say, each such attempt will
free 16 pages on a new cpu. That means every percpu cache will have -16
pages, except the first one, which will have 4 - 16 = -12. A/B and A
atomic counters will not be touched at all.
Now a user removes A/B. All percpu caches are freed and corresponding
vmstat numbers are forgotten. A has 96 pages more than expected.
As memory cgroups are created and destroyed, errors do accumulate. Even
1-2 pages differences can accumulate into large numbers.
To fix this issue let's accumulate and propagate percpu vmstat values
before releasing the memory cgroup. At this point these numbers are
stable and cannot be changed.
Since on cpu hotplug we do flush percpu vmstats anyway, we can iterate
only over online cpus.
Link: http://lkml.kernel.org/r/20190819202338.363363-2-guro@fb.com
Fixes:
|
||
|
David Rientjes
|
cd96103838 |
mm, page_alloc: move_freepages should not examine struct page of reserved memory
After commit |
||
|
Henry Burns
|
d776aaa989 |
mm/z3fold.c: fix race between migration and destruction
In z3fold_destroy_pool() we call destroy_workqueue(&pool->compact_wq). However, we have no guarantee that migration isn't happening in the background at that time. Migration directly calls queue_work_on(pool->compact_wq), if destruction wins that race we are using a destroyed workqueue. Link: http://lkml.kernel.org/r/20190809213828.202833-1-henryburns@google.com Signed-off-by: Henry Burns <henryburns@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Jonathan Adams <jwadams@google.com> Cc: Henry Burns <henrywolfeburns@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yang, Philip
|
e3fe8e555d |
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
hmm_range_fault() may return NULL pages because some of the pfns are equal
to HMM_PFN_NONE. This happens randomly under memory pressure. The reason
is during the swapped out page pte path, hmm_vma_handle_pte() doesn't
update the fault variable from cpu_flags, so it failed to call
hmm_vam_do_fault() to swap the page in.
The fix is to call hmm_pte_need_fault() to update fault variable.
Fixes:
|
||
|
Jason Gunthorpe
|
c96245148c |
mm/mmu_notifiers: remove unregister_no_release
mmu_notifier_unregister_no_release() and mmu_notifier_call_srcu() no longer have any users, they have all been converted to use mmu_notifier_put(). So delete this difficult to use interface. Link: https://lore.kernel.org/r/20190806231548.25242-12-jgg@ziepe.ca Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jason Gunthorpe
|
daa138a58c |
Merge branch 'odp_fixes' into hmm.git
From rdma.git Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies, and is being taken into hmm.git due to dependencies in the next patches. * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Darrick J. Wong
|
dc617f29db |
vfs: don't allow writes to swap files
Don't let userspace write to an active swap file because the kernel effectively has a long term lease on the storage and things could get seriously corrupted if we let this happen. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
||
|
Darrick J. Wong
|
1638045c36 |
mm: set S_SWAPFILE on blockdev swap devices
Set S_SWAPFILE on block device inodes so that they have the same protections as a swap flie. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
fdc029b19d |
memremap: remove the dev field in struct dev_pagemap
The dev field in struct dev_pagemap is only used to print dev_name in two places, which are at best nice to have. Just remove the field and thus the name in those two messages. Link: https://lore.kernel.org/r/20190818090557.17853-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Bharata B Rao <bharata@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Daniel Vetter
|
8402ce61be |
mm/mmu_notifiers: check if mmu notifier callbacks are allowed to fail
Just a bit of paranoia, since if we start pushing this deep into callchains it's hard to spot all places where an mmu notifier implementation might fail when it's not allowed to. Inspired by some confusion we had discussing i915 mmu notifiers and whether we could use the newly-introduced return value to handle some corner cases. Until we realized that these are only for when a task has been killed by the oom reaper. An alternative approach would be to split the callback into two versions, one with the int return value, and the other with void return value like in older kernels. But that's a lot more churn for fairly little gain I think. Summary from the m-l discussion on why we want something at warning level: This allows automated tooling in CI to catch bugs without humans having to look at everything. If we just upgrade the existing pr_info to a pr_warn, then we'll have false positives. And as-is, no one will ever spot the problem since it's lost in the massive amounts of overall dmesg noise. Link: https://lore.kernel.org/r/20190814202027.18735-2-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
9b2ed9cb97 |
mm: remove CONFIG_MIGRATE_VMA_HELPER
CONFIG_MIGRATE_VMA_HELPER guards helpers that are required for proper devic private memory support. Remove the option and just check for CONFIG_DEVICE_PRIVATE instead. Link: https://lore.kernel.org/r/20190814075928.23766-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
06d462beb4 |
mm: remove the unused MIGRATE_PFN_DEVICE flag
No one ever checks this flag, and we could easily get that information from the page if needed. Link: https://lore.kernel.org/r/20190814075928.23766-10-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
a7d1f22bb7 |
mm: turn migrate_vma upside down
There isn't any good reason to pass callbacks to migrate_vma. Instead we can just export the three steps done by this function to drivers and let them sequence the operation without callbacks. This removes a lot of boilerplate code as-is, and will allow the drivers to drastically improve code flow and error handling further on. Link: https://lore.kernel.org/r/20190814075928.23766-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jason Gunthorpe
|
c7d8b7824f |
hmm: use mmu_notifier_get/put for 'struct hmm'
This is a significant simplification, it eliminates all the remaining 'hmm' stuff in mm_struct, eliminates krefing along the critical notifier paths, and takes away all the ugly locking and abuse of page_table_lock. mmu_notifier_get() provides the single struct hmm per struct mm which eliminates mm->hmm. It also directly guarantees that no mmu_notifier op callback is callable while concurrent free is possible, this eliminates all the krefs inside the mmu_notifier callbacks. The remaining krefs in the range code were overly cautious, drivers are already not permitted to free the mirror while a range exists. Link: https://lore.kernel.org/r/20190806231548.25242-6-jgg@ziepe.ca Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Jason Gunthorpe
|
2c7933f53f |
mm/mmu_notifiers: add a get/put scheme for the registration
Many places in the kernel have a flow where userspace will create some
object and that object will need to connect to the subsystem's
mmu_notifier subscription for the duration of its lifetime.
In this case the subsystem is usually tracking multiple mm_structs and it
is difficult to keep track of what struct mmu_notifier's have been
allocated for what mm's.
Since this has been open coded in a variety of exciting ways, provide core
functionality to do this safely.
This approach uses the struct mmu_notifier_ops * as a key to determine if
the subsystem has a notifier registered on the mm or not. If there is a
registration then the existing notifier struct is returned, otherwise the
ops->alloc_notifiers() is used to create a new per-subsystem notifier for
the mm.
The destroy side incorporates an async call_srcu based destruction which
will avoid bugs in the callers such as commit
|
||
|
Jason Gunthorpe
|
70df291bf8 |
mm/mmu_notifiers: do not speculatively allocate a mmu_notifier_mm
A prior commit |
||
|
Jason Gunthorpe
|
56c57103db |
mm/mmu_notifiers: hoist do_mmu_notifier_register down_write to the caller
This simplifies the code to not have so many one line functions and extra logic. __mmu_notifier_register() simply becomes the entry point to register the notifier, and the other one calls it under lock. Also add a lockdep_assert to check that the callers are holding the lock as expected. Link: https://lore.kernel.org/r/20190806231548.25242-2-jgg@ziepe.ca Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Tested-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Mike Kravetz
|
4643d67e8c |
hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
Li Wang discovered that LTP/move_page12 V2 sometimes triggers SIGBUS in
the kernel-v5.2.3 testing. This is caused by a race between hugetlb
page migration and page fault.
If a hugetlb page can not be allocated to satisfy a page fault, the task
is sent SIGBUS. This is normal hugetlbfs behavior. A hugetlb fault
mutex exists to prevent two tasks from trying to instantiate the same
page. This protects against the situation where there is only one
hugetlb page, and both tasks would try to allocate. Without the mutex,
one would fail and SIGBUS even though the other fault would be
successful.
There is a similar race between hugetlb page migration and fault.
Migration code will allocate a page for the target of the migration. It
will then unmap the original page from all page tables. It does this
unmap by first clearing the pte and then writing a migration entry. The
page table lock is held for the duration of this clear and write
operation. However, the beginnings of the hugetlb page fault code
optimistically checks the pte without taking the page table lock. If
clear (as it can be during the migration unmap operation), a hugetlb
page allocation is attempted to satisfy the fault. Note that the page
which will eventually satisfy this fault was already allocated by the
migration code. However, the allocation within the fault path could
fail which would result in the task incorrectly being sent SIGBUS.
Ideally, we could take the hugetlb fault mutex in the migration code
when modifying the page tables. However, locks must be taken in the
order of hugetlb fault mutex, page lock, page table lock. This would
require significant rework of the migration code. Instead, the issue is
addressed in the hugetlb fault code. After failing to allocate a huge
page, take the page table lock and check for huge_pte_none before
returning an error. This is the same check that must be made further in
the code even if page allocation is successful.
Link: http://lkml.kernel.org/r/20190808000533.7701-1-mike.kravetz@oracle.com
Fixes:
|
||
|
Mel Gorman
|
28360f3987 |
mm, vmscan: do not special-case slab reclaim when watermarks are boosted
Dave Chinner reported a problem pointing a finger at commit |
||
|
Andrea Arcangeli
|
a8282608c8 |
Revert "mm, thp: restore node-local hugepage allocations"
This reverts commit |
||
|
Andrea Arcangeli
|
92717d429b |
Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
Patch series "reapply: relax __GFP_THISNODE for MADV_HUGEPAGE mappings". The fixes for what was originally reported as "pathological THP behavior" we rightfully reverted to be sure not to introduced regressions at end of a merge window after a severe regression report from the kernel bot. We can safely re-apply them now that we had time to analyze the problem. The mm process worked fine, because the good fixes were eventually committed upstream without excessive delay. The regression reported by the kernel bot however forced us to revert the good fixes to be sure not to introduce regressions and to give us the time to analyze the issue further. The silver lining is that this extra time allowed to think more at this issue and also plan for a future direction to improve things further in terms of THP NUMA locality. This patch (of 2): This reverts commit |
||
|
Roman Gushchin
|
ec9f02384f |
mm: workingset: fix vmstat counters for shadow nodes
Memcg counters for shadow nodes are broken because the memcg pointer is
obtained in a wrong way. The following approach is used:
virt_to_page(xa_node)->mem_cgroup
Since commit
|
||
|
Isaac J. Manjarres
|
951531691c |
mm/usercopy: use memory range to be accessed for wraparound check
Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].
This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.
Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.
Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org
Fixes:
|
||
|
Catalin Marinas
|
fcf3a5b62f |
mm: kmemleak: disable early logging in case of error
If an error occurs during kmemleak_init() (e.g. kmem cache cannot be created), kmemleak is disabled but kmemleak_early_log remains enabled. Subsequently, when the .init.text section is freed, the log_early() function no longer exists. To avoid a page fault in such scenario, ensure that kmemleak_disable() also disables early logging. Link: http://lkml.kernel.org/r/20190731152302.42073-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kuppuswamy Sathyanarayanan
|
5336e52c9e |
mm/vmalloc.c: fix percpu free VM area search criteria
Recent changes to the vmalloc code by commit |
||
|
Miles Chen
|
54a83d6bcb |
mm/memcontrol.c: fix use after free in mem_cgroup_iter()
This patch is sent to report an use after free in mem_cgroup_iter()
after merging commit be2657752e9e ("mm: memcg: fix use after free in
mem_cgroup_iter()").
I work with android kernel tree (4.9 & 4.14), and commit be2657752e9e
("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged
to the trees. However, I can still observe use after free issues
addressed in the commit be2657752e9e. (on low-end devices, a few times
this month)
backtrace:
css_tryget <- crash here
mem_cgroup_iter
shrink_node
shrink_zones
do_try_to_free_pages
try_to_free_pages
__perform_reclaim
__alloc_pages_direct_reclaim
__alloc_pages_slowpath
__alloc_pages_nodemask
To debug, I poisoned mem_cgroup before freeing it:
static void __mem_cgroup_free(struct mem_cgroup *memcg)
for_each_node(node)
free_mem_cgroup_per_node_info(memcg, node);
free_percpu(memcg->stat);
+ /* poison memcg before freeing it */
+ memset(memcg, 0x78, sizeof(struct mem_cgroup));
kfree(memcg);
}
The coredump shows the position=0xdbbc2a00 is freed.
(gdb) p/x ((struct mem_cgroup_per_node *)0xe5009e00)->iter[8]
$13 = {position = 0xdbbc2a00, generation = 0x2efd}
0xdbbc2a00: 0xdbbc2e00 0x00000000 0xdbbc2800 0x00000100
0xdbbc2a10: 0x00000200 0x78787878 0x00026218 0x00000000
0xdbbc2a20: 0xdcad6000 0x00000001 0x78787800 0x00000000
0xdbbc2a30: 0x78780000 0x00000000 0x0068fb84 0x78787878
0xdbbc2a40: 0x78787878 0x78787878 0x78787878 0xe3fa5cc0
0xdbbc2a50: 0x78787878 0x78787878 0x00000000 0x00000000
0xdbbc2a60: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a70: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a80: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a90: 0x00000001 0x00000000 0x00000000 0x00100000
0xdbbc2aa0: 0x00000001 0xdbbc2ac8 0x00000000 0x00000000
0xdbbc2ab0: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2ac0: 0x00000000 0x00000000 0xe5b02618 0x00001000
0xdbbc2ad0: 0x00000000 0x78787878 0x78787878 0x78787878
0xdbbc2ae0: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2af0: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b00: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b10: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b20: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b30: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b40: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b50: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b60: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b70: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b80: 0x78787878 0x78787878 0x00000000 0x78787878
0xdbbc2b90: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2ba0: 0x78787878 0x78787878 0x78787878 0x78787878
In the reclaim path, try_to_free_pages() does not setup
sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ...,
shrink_node().
In mem_cgroup_iter(), root is set to root_mem_cgroup because
sc->target_mem_cgroup is NULL. It is possible to assign a memcg to
root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter().
try_to_free_pages
struct scan_control sc = {...}, target_mem_cgroup is 0x0;
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup *root = sc->target_mem_cgroup;
memcg = mem_cgroup_iter(root, NULL, &reclaim);
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
css = css_next_descendant_pre(css, &root->css);
memcg = mem_cgroup_from_css(css);
cmpxchg(&iter->position, pos, memcg);
My device uses memcg non-hierarchical mode. When we release a memcg:
invalidate_reclaim_iterators() reaches only dead_memcg and its parents.
If non-hierarchical mode is used, invalidate_reclaim_iterators() never
reaches root_mem_cgroup.
static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
{
struct mem_cgroup *memcg = dead_memcg;
for (; memcg; memcg = parent_mem_cgroup(memcg)
...
}
So the use after free scenario looks like:
CPU1 CPU2
try_to_free_pages
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
css = css_next_descendant_pre(css, &root->css);
memcg = mem_cgroup_from_css(css);
cmpxchg(&iter->position, pos, memcg);
invalidate_reclaim_iterators(memcg);
...
__mem_cgroup_free()
kfree(memcg);
try_to_free_pages
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
mz = mem_cgroup_nodeinfo(root, reclaim->pgdat->node_id);
iter = &mz->iter[reclaim->priority];
pos = READ_ONCE(iter->position);
css_tryget(&pos->css) <- use after free
To avoid this, we should also invalidate root_mem_cgroup.nodeinfo.iter
in invalidate_reclaim_iterators().
[cai@lca.pw: fix -Wparentheses compilation warning]
Link: http://lkml.kernel.org/r/1564580753-17531-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20190730015729.4406-1-miles.chen@mediatek.com
Fixes:
|
||
|
Henry Burns
|
b997052bc3 |
mm/z3fold.c: fix z3fold_destroy_pool() race condition
The constraint from the zpool use of z3fold_destroy_pool() is there are
no outstanding handles to memory (so no active allocations), but it is
possible for there to be outstanding work on either of the two wqs in
the pool.
Calling z3fold_deregister_migration() before the workqueues are drained
means that there can be allocated pages referencing a freed inode,
causing any thread in compaction to be able to trip over the bad pointer
in PageMovable().
Link: http://lkml.kernel.org/r/20190726224810.79660-2-henryburns@google.com
Fixes:
|
||
|
Henry Burns
|
6051d3bd3b |
mm/z3fold.c: fix z3fold_destroy_pool() ordering
The constraint from the zpool use of z3fold_destroy_pool() is there are
no outstanding handles to memory (so no active allocations), but it is
possible for there to be outstanding work on either of the two wqs in
the pool.
If there is work queued on pool->compact_workqueue when it is called,
z3fold_destroy_pool() will do:
z3fold_destroy_pool()
destroy_workqueue(pool->release_wq)
destroy_workqueue(pool->compact_wq)
drain_workqueue(pool->compact_wq)
do_compact_page(zhdr)
kref_put(&zhdr->refcount)
__release_z3fold_page(zhdr, ...)
queue_work_on(pool->release_wq, &pool->work) *BOOM*
So compact_wq needs to be destroyed before release_wq.
Link: http://lkml.kernel.org/r/20190726224810.79660-1-henryburns@google.com
Fixes:
|
||
|
Yang Shi
|
a53190a4aa |
mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind
When running syzkaller internally, we ran into the below bug on 4.9.x
kernel:
kernel BUG at mm/huge_memory.c:2124!
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
task: ffff880067b34900 task.stack: ffff880068998000
RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124
Call Trace:
split_huge_page include/linux/huge_mm.h:100 [inline]
queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538
walk_pmd_range mm/pagewalk.c:50 [inline]
walk_pud_range mm/pagewalk.c:90 [inline]
walk_pgd_range mm/pagewalk.c:116 [inline]
__walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208
walk_page_range+0x154/0x370 mm/pagewalk.c:285
queue_pages_range+0x115/0x150 mm/mempolicy.c:694
do_mbind mm/mempolicy.c:1241 [inline]
SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370
SyS_mbind+0x46/0x60 mm/mempolicy.c:1352
do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282
entry_SYSCALL_64_after_swapgs+0x5d/0xdb
Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c
RIP [<ffffffff81895d6b>] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124
RSP <ffff88006899f980>
with the below test:
uint64_t r[1] = {0xffffffffffffffff};
int main(void)
{
syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
intptr_t res = 0;
res = syscall(__NR_socket, 0x11, 3, 0x300);
if (res != -1)
r[0] = res;
*(uint32_t*)0x20000040 = 0x10000;
*(uint32_t*)0x20000044 = 1;
*(uint32_t*)0x20000048 = 0xc520;
*(uint32_t*)0x2000004c = 1;
syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10);
syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0);
*(uint64_t*)0x20000340 = 2;
syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3);
return 0;
}
Actually the test does:
mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000
socket(AF_PACKET, SOCK_RAW, 768) = 3
setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0
mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000
mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0
The setsockopt() would allocate compound pages (16 pages in this test)
for packet tx ring, then the mmap() would call packet_mmap() to map the
pages into the user address space specified by the mmap() call.
When calling mbind(), it would scan the vma to queue the pages for
migration to the new node. It would split any huge page since 4.9
doesn't support THP migration, however, the packet tx ring compound
pages are not THP and even not movable. So, the above bug is triggered.
However, the later kernel is not hit by this issue due to commit
|
||
|
Yang Shi
|
d883544515 |
mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified
When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should
try best to migrate misplaced pages, if some of the pages could not be
migrated, then return -EIO.
There are three different sub-cases:
1. vma is not migratable
2. vma is migratable, but there are unmovable pages
3. vma is migratable, pages are movable, but migrate_pages() fails
If #1 happens, kernel would just abort immediately, then return -EIO,
after
|
||
|
Ralph Campbell
|
1de13ee592 |
mm/hmm: fix bad subpage pointer in try_to_unmap_one
When migrating an anonymous private page to a ZONE_DEVICE private page,
the source page->mapping and page->index fields are copied to the
destination ZONE_DEVICE struct page and the page_mapcount() is
increased. This is so rmap_walk() can be used to unmap and migrate the
page back to system memory.
However, try_to_unmap_one() computes the subpage pointer from a swap pte
which computes an invalid page pointer and a kernel panic results such
as:
BUG: unable to handle page fault for address: ffffea1fffffffc8
Currently, only single pages can be migrated to device private memory so
no subpage computation is needed and it can be set to "page".
[rcampbell@nvidia.com: add comment]
Link: http://lkml.kernel.org/r/20190724232700.23327-4-rcampbell@nvidia.com
Link: http://lkml.kernel.org/r/20190719192955.30462-4-rcampbell@nvidia.com
Fixes:
|
||
|
Ralph Campbell
|
7ab0ad0e74 |
mm/hmm: fix ZONE_DEVICE anon page mapping reuse
When a ZONE_DEVICE private page is freed, the page->mapping field can be
set. If this page is reused as an anonymous page, the previous value
can prevent the page from being inserted into the CPU's anon rmap table.
For example, when migrating a pte_none() page to device memory:
migrate_vma(ops, vma, start, end, src, dst, private)
migrate_vma_collect()
src[] = MIGRATE_PFN_MIGRATE
migrate_vma_prepare()
/* no page to lock or isolate so OK */
migrate_vma_unmap()
/* no page to unmap so OK */
ops->alloc_and_copy()
/* driver allocates ZONE_DEVICE page for dst[] */
migrate_vma_pages()
migrate_vma_insert_page()
page_add_new_anon_rmap()
__page_set_anon_rmap()
/* This check sees the page's stale mapping field */
if (PageAnon(page))
return
/* page->mapping is not updated */
The result is that the migration appears to succeed but a subsequent CPU
fault will be unable to migrate the page back to system memory or worse.
Clear the page->mapping field when freeing the ZONE_DEVICE page so stale
pointer data doesn't affect future page use.
Link: http://lkml.kernel.org/r/20190719192955.30462-3-rcampbell@nvidia.com
Fixes:
|
||
|
Dan Williams
|
06282373ff |
mm/memremap: Fix reuse of pgmap instances with internal references
Currently, attempts to shutdown and re-enable a device-dax instance
trigger:
Missing reference count teardown definition
WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850
[..]
RIP: 0010:devm_memremap_pages+0x234/0x850
[..]
Call Trace:
dev_dax_probe+0x66/0x190 [device_dax]
really_probe+0xef/0x390
driver_probe_device+0xb4/0x100
device_driver_attach+0x4f/0x60
Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.
Fixes:
|
||
|
Christoph Hellwig
|
9c240a7bb3 |
mm/hmm: make HMM_MIRROR an implicit option
Make HMM_MIRROR an option that is selected by drivers wanting to use it instead of a user visible option as it is just a low-level implementation detail. Link: https://lore.kernel.org/r/20190806160554.14046-15-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
f442c283ef |
mm/hmm: allow HMM_MIRROR on all architectures with MMU
There isn't really any architecture specific code in this page table walk implementation, so drop the dependencies. Link: https://lore.kernel.org/r/20190806160554.14046-14-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
251bbe59b7 |
mm/hmm: cleanup the hmm_vma_walk_hugetlb_entry stub
Stub out the whole function and assign NULL to the .hugetlb_entry method if CONFIG_HUGETLB_PAGE is not set, as the method won't ever be called in that case. Link: https://lore.kernel.org/r/20190806160554.14046-13-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
9d3973d60f |
mm/hmm: cleanup the hmm_vma_handle_pmd stub
Stub out the whole function when CONFIG_TRANSPARENT_HUGEPAGE is not set to make the function easier to read. Link: https://lore.kernel.org/r/20190806160554.14046-12-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
f0b3c45c89 |
mm/hmm: only define hmm_vma_walk_pud if needed
We only need the special pud_entry walker if PUD-sized hugepages and pte mappings are supported, else the common pagewalk code will take care of the iteration. Not implementing this callback reduced the amount of code compiled for non-x86 platforms, and also fixes compile failures with other architectures when helpers like pud_pfn are not implemented. Link: https://lore.kernel.org/r/20190806160554.14046-11-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
309f9a4f5e |
mm/hmm: don't abuse pte_index() in hmm_vma_handle_pmd
pte_index is an internal arch helper in various architectures, without consistent semantics. Open code that calculation of a PMD index based on the virtual address instead. Link: https://lore.kernel.org/r/20190806160554.14046-10-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |
||
|
Christoph Hellwig
|
05c23af4a1 |
mm/hmm: remove the mask variable in hmm_vma_walk_hugetlb_entry
The pagewalk code already passes the value as the hmask parameter. Link: https://lore.kernel.org/r/20190806160554.14046-9-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> |