From ae6546835efaa7195aaaa10e5ff4e695cd82a816 Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Sat, 12 Aug 2023 20:52:39 +0200 Subject: [PATCH 1/6] drm/panel: JDI LT070ME05000 simplify with dev_err_probe() Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by: David Heidelberg Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz --- .../gpu/drm/panel/panel-jdi-lt070me05000.c | 36 ++++++++----------- 1 file changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c index 8f4f137a2af6..213008499caa 100644 --- a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c @@ -404,38 +404,30 @@ static int jdi_panel_add(struct jdi_panel *jdi) ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(jdi->supplies), jdi->supplies); - if (ret < 0) { - dev_err(dev, "failed to init regulator, ret=%d\n", ret); - return ret; - } + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to init regulator, ret=%d\n", ret); jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(jdi->enable_gpio)) { - ret = PTR_ERR(jdi->enable_gpio); - dev_err(dev, "cannot get enable-gpio %d\n", ret); - return ret; + return dev_err_probe(dev, PTR_ERR(jdi->enable_gpio), + "cannot get enable-gpio %d\n", ret); } jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(jdi->reset_gpio)) { - ret = PTR_ERR(jdi->reset_gpio); - dev_err(dev, "cannot get reset-gpios %d\n", ret); - return ret; - } + if (IS_ERR(jdi->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(jdi->reset_gpio), + "cannot get reset-gpios %d\n", ret); jdi->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc-en", GPIOD_OUT_LOW); - if (IS_ERR(jdi->dcdc_en_gpio)) { - ret = PTR_ERR(jdi->dcdc_en_gpio); - dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret); - return ret; - } + if (IS_ERR(jdi->dcdc_en_gpio)) + return dev_err_probe(dev, PTR_ERR(jdi->dcdc_en_gpio), + "cannot get dcdc-en-gpio %d\n", ret); jdi->backlight = drm_panel_create_dsi_backlight(jdi->dsi); - if (IS_ERR(jdi->backlight)) { - ret = PTR_ERR(jdi->backlight); - dev_err(dev, "failed to register backlight %d\n", ret); - return ret; - } + if (IS_ERR(jdi->backlight)) + return dev_err_probe(dev, PTR_ERR(jdi->backlight), + "failed to register backlight %d\n", ret); drm_panel_init(&jdi->base, &jdi->dsi->dev, &jdi_panel_funcs, DRM_MODE_CONNECTOR_DSI); From e8470c0a7bcaa82f78ad34282d662dd7bd9630c2 Mon Sep 17 00:00:00 2001 From: Luca Ceresoli Date: Fri, 4 Aug 2023 17:12:39 +0200 Subject: [PATCH 2/6] drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com --- drivers/gpu/drm/panel/panel-simple.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index aaba36b3a674..b38d0e95cd54 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -999,21 +999,21 @@ static const struct panel_desc auo_g104sn02 = { .connector_type = DRM_MODE_CONNECTOR_LVDS, }; -static const struct drm_display_mode auo_g121ean01_mode = { - .clock = 66700, - .hdisplay = 1280, - .hsync_start = 1280 + 58, - .hsync_end = 1280 + 58 + 8, - .htotal = 1280 + 58 + 8 + 70, - .vdisplay = 800, - .vsync_start = 800 + 6, - .vsync_end = 800 + 6 + 4, - .vtotal = 800 + 6 + 4 + 10, +static const struct display_timing auo_g121ean01_timing = { + .pixelclock = { 60000000, 74400000, 90000000 }, + .hactive = { 1280, 1280, 1280 }, + .hfront_porch = { 20, 50, 100 }, + .hback_porch = { 20, 50, 100 }, + .hsync_len = { 30, 100, 200 }, + .vactive = { 800, 800, 800 }, + .vfront_porch = { 2, 10, 25 }, + .vback_porch = { 2, 10, 25 }, + .vsync_len = { 4, 18, 50 }, }; static const struct panel_desc auo_g121ean01 = { - .modes = &auo_g121ean01_mode, - .num_modes = 1, + .timings = &auo_g121ean01_timing, + .num_timings = 1, .bpc = 8, .size = { .width = 261, From 2d956177b7c96e62fac762a3b7da4318cde27a73 Mon Sep 17 00:00:00 2001 From: Pranjal Ramajor Asha Kanojiya Date: Wed, 2 Aug 2023 08:59:37 -0600 Subject: [PATCH 3/6] accel/qaic: Fix slicing memory leak The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Carl Vanderlip Reviewed-by: Jeffrey Hugo Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com --- drivers/accel/qaic/qaic_data.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/accel/qaic/qaic_data.c b/drivers/accel/qaic/qaic_data.c index e9a1cb779b30..6b6d981a71be 100644 --- a/drivers/accel/qaic/qaic_data.c +++ b/drivers/accel/qaic/qaic_data.c @@ -1021,6 +1021,7 @@ int qaic_attach_slice_bo_ioctl(struct drm_device *dev, void *data, struct drm_fi bo->dbc = dbc; srcu_read_unlock(&dbc->ch_lock, rcu_id); drm_gem_object_put(obj); + kfree(slice_ent); srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); From 96d3c1cadedb6ae2e8965e19cd12caa244afbd9c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 10 Aug 2023 15:23:06 +0300 Subject: [PATCH 4/6] accel/qaic: Clean up integer overflow checking in map_user_pages() The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter Reviewed-by: Jeffrey Hugo Reviewed-by: Carl Vanderlip Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain --- drivers/accel/qaic/qaic_control.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index cfbc92da426f..388abd40024b 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -392,18 +392,31 @@ static int find_and_map_user_pages(struct qaic_device *qdev, struct qaic_manage_trans_dma_xfer *in_trans, struct ioctl_resources *resources, struct dma_xfer *xfer) { + u64 xfer_start_addr, remaining, end, total; unsigned long need_pages; struct page **page_list; unsigned long nr_pages; struct sg_table *sgt; - u64 xfer_start_addr; int ret; int i; - xfer_start_addr = in_trans->addr + resources->xferred_dma_size; + if (check_add_overflow(in_trans->addr, resources->xferred_dma_size, &xfer_start_addr)) + return -EINVAL; - need_pages = DIV_ROUND_UP(in_trans->size + offset_in_page(xfer_start_addr) - - resources->xferred_dma_size, PAGE_SIZE); + if (in_trans->size < resources->xferred_dma_size) + return -EINVAL; + remaining = in_trans->size - resources->xferred_dma_size; + if (remaining == 0) + return 0; + + if (check_add_overflow(xfer_start_addr, remaining, &end)) + return -EINVAL; + + total = remaining + offset_in_page(xfer_start_addr); + if (total >= SIZE_MAX) + return -EINVAL; + + need_pages = DIV_ROUND_UP(total, PAGE_SIZE); nr_pages = need_pages; @@ -435,7 +448,7 @@ static int find_and_map_user_pages(struct qaic_device *qdev, ret = sg_alloc_table_from_pages(sgt, page_list, nr_pages, offset_in_page(xfer_start_addr), - in_trans->size - resources->xferred_dma_size, GFP_KERNEL); + remaining, GFP_KERNEL); if (ret) { ret = -ENOMEM; goto free_sgt; @@ -566,9 +579,6 @@ static int encode_dma(struct qaic_device *qdev, void *trans, struct wrapper_list QAIC_MANAGE_EXT_MSG_LENGTH) return -ENOMEM; - if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) - return -EINVAL; - xfer = kmalloc(sizeof(*xfer), GFP_KERNEL); if (!xfer) return -ENOMEM; From 1b254b791d7b7dea6e8adc887fbbd51746d8bb27 Mon Sep 17 00:00:00 2001 From: Karol Herbst Date: Mon, 14 Aug 2023 16:49:32 +0200 Subject: [PATCH 5/6] drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit. Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/ Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class") Signed-off-by: Karol Herbst Reviewed-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com --- drivers/gpu/drm/nouveau/nouveau_connector.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index a2e0033e8a26..622f6eb9a8bf 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1408,8 +1408,7 @@ nouveau_connector_create(struct drm_device *dev, ret = nvif_conn_ctor(&disp->disp, nv_connector->base.name, nv_connector->index, &nv_connector->conn); if (ret) { - kfree(nv_connector); - return ERR_PTR(ret); + goto drm_conn_err; } ret = nvif_conn_event_ctor(&nv_connector->conn, "kmsHotplug", @@ -1426,8 +1425,7 @@ nouveau_connector_create(struct drm_device *dev, if (ret) { nvif_event_dtor(&nv_connector->hpd); nvif_conn_dtor(&nv_connector->conn); - kfree(nv_connector); - return ERR_PTR(ret); + goto drm_conn_err; } } } @@ -1475,4 +1473,9 @@ nouveau_connector_create(struct drm_device *dev, drm_connector_register(connector); return connector; + +drm_conn_err: + drm_connector_cleanup(connector); + kfree(nv_connector); + return ERR_PTR(ret); } From 50b6f2c8297793f7f3315623db78dcff85158e96 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 15 Aug 2023 13:19:07 +0300 Subject: [PATCH 6/6] Revert "drm/edid: Fix csync detailed mode parsing" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1. Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed EDID detailed mode sync parsing. Unfortunately, there are quite a few displays out there that have bogus (zero) sync field that are broken by the change. Zero means analog composite sync, which is not right for digital displays, and the modes get rejected. Regardless, it used to work, and it needs to continue to work. Revert the change. Rejecting modes with analog composite sync was the part that fixed the gitlab issue 8146 [1]. We'll need to get back to the drawing board with that. [1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044 Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") Cc: Ville Syrjälä Cc: dri-devel@lists.freedesktop.org Cc: # v6.4+ Signed-off-by: Jani Nikula Acked-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com --- drivers/gpu/drm/drm_edid.c | 29 ++++++++--------------------- include/drm/drm_edid.h | 12 +++--------- 2 files changed, 11 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index e0dbd9140726..1f470968ed14 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3456,6 +3456,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto connector->base.id, connector->name); return NULL; } + if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) { + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Composite sync not supported\n", + connector->base.id, connector->name); + } /* it is incorrect if hsync/vsync width is zero */ if (!hsync_pulse_width || !vsync_pulse_width) { @@ -3502,27 +3506,10 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto if (info->quirks & EDID_QUIRK_DETAILED_SYNC_PP) { mode->flags |= DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC; } else { - switch (pt->misc & DRM_EDID_PT_SYNC_MASK) { - case DRM_EDID_PT_ANALOG_CSYNC: - case DRM_EDID_PT_BIPOLAR_ANALOG_CSYNC: - drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Analog composite sync!\n", - connector->base.id, connector->name); - mode->flags |= DRM_MODE_FLAG_CSYNC | DRM_MODE_FLAG_NCSYNC; - break; - case DRM_EDID_PT_DIGITAL_CSYNC: - drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Digital composite sync!\n", - connector->base.id, connector->name); - mode->flags |= DRM_MODE_FLAG_CSYNC; - mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ? - DRM_MODE_FLAG_PCSYNC : DRM_MODE_FLAG_NCSYNC; - break; - case DRM_EDID_PT_DIGITAL_SEPARATE_SYNC: - mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ? - DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC; - mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? - DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; - break; - } + mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ? + DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC; + mode->flags |= (pt->misc & DRM_EDID_PT_VSYNC_POSITIVE) ? + DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC; } set_size: diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 169755d3de19..48e93f909ef6 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -61,15 +61,9 @@ struct std_timing { u8 vfreq_aspect; } __attribute__((packed)); -#define DRM_EDID_PT_SYNC_MASK (3 << 3) -# define DRM_EDID_PT_ANALOG_CSYNC (0 << 3) -# define DRM_EDID_PT_BIPOLAR_ANALOG_CSYNC (1 << 3) -# define DRM_EDID_PT_DIGITAL_CSYNC (2 << 3) -# define DRM_EDID_PT_CSYNC_ON_RGB (1 << 1) /* analog csync only */ -# define DRM_EDID_PT_CSYNC_SERRATE (1 << 2) -# define DRM_EDID_PT_DIGITAL_SEPARATE_SYNC (3 << 3) -# define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1) /* also digital csync */ -# define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2) +#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1) +#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2) +#define DRM_EDID_PT_SEPARATE_SYNC (3 << 3) #define DRM_EDID_PT_STEREO (1 << 5) #define DRM_EDID_PT_INTERLACED (1 << 7)