If we need to raise an error, make sure the internal state is clean, because
a successful driver.Get() may have its internal state changed (eg. counting,
or mounts), while callers will only do that after a succussful Mount().
Signed-off-by: shuai-z <zs.broccoli@gmail.com>
In an effort to make layer content 'stable' between import
and export from two different graph drivers, we must resolve
an issue where AUFS produces metadata files in its layers
which other drivers explicitly ignore when importing.
The issue presents itself like this:
- Generate a layer using AUFS
- On commit of that container, the new stored layer contains
AUFS metadata files/dirs. The stored layer content has some
tarsum value: '1234567'
- `docker save` that image to a USB drive and `docker load`
into another docker engine instance which uses another
graph driver, say 'btrfs'
- On load, this graph driver explicitly ignores any AUFS metadata
that it encounters. The stored layer content now has some
different tarsum value: 'abcdefg'.
The only (apparent) useful aufs metadata to keep are the psuedo link
files located at `/.wh..wh.plink/`. Thes files hold information at the
RW layer about hard linked files between this layer and another layer.
The other graph drivers make sure to copy up these psuedo linked files
but I've tested out a few different situations and it seems that this
is unnecessary (In my test, AUFS already copies up the other hard linked
files to the RW layer).
This changeset adds explicit exclusion of the AUFS metadata files and
directories (NOTE: not the whiteout files!) on commit of a container
using the AUFS storage driver.
Also included is a change to the archive package. It now explicitly
ignores the root directory from being included in the resulting tar archive
for 2 reasons: 1) it's unnecessary. 2) It's another difference between
what other graph drivers produce when exporting a layer to a tar archive.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
This backend uses the overlayfs union filesystem for containers
plus hard link file sharing for images.
Each container/image can have a "root" subdirectory which is a plain
filesystem hierarchy, or they can use overlayfs.
If they use overlayfs there is a "upper" directory and a "lower-id"
file, as well as "merged" and "work" directories. The "upper"
directory has the upper layer of the overlay, and "lower-id" contains
the id of the parent whose "root" directory shall be used as the lower
layer in the overlay. The overlay itself is mounted in the "merged"
directory, and the "work" dir is needed for overlayfs to work.
When a overlay layer is created there are two cases, either the
parent has a "root" dir, then we start out with a empty "upper"
directory overlaid on the parents root. This is typically the
case with the init layer of a container which is based on an image.
If there is no "root" in the parent, we inherit the lower-id from
the parent and start by making a copy if the parents "upper" dir.
This is typically the case for a container layer which copies
its parent -init upper layer.
Additionally we also have a custom implementation of ApplyLayer
which makes a recursive copy of the parent "root" layer using
hardlinks to share file data, and then applies the layer on top
of that. This means all chile images share file (but not directory)
data with the parent.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
The vfs storage driver currently shells out to the `cp` binary on the host
system to perform an 'archive' copy of the base image to a new directory.
The archive option preserves the modified time of the files which are created
but there was an issue where it was unable to preserve the modified time of
copied symbolic links on some host systems with an outdated version of `cp`.
This change no longer relies on the host system implementation and instead
utilizes the `CopyWithTar` function found in `pkg/archive` which is used
to copy from source to destination directory using a Tar archive, which
should correctly preserve file attributes.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
If we first request port 49153 (BeginPortRange) explicitly, and later some time request the next free port (of same ip/proto) by calling RequestPort() with port number 0, we will again get 49153 returned, even if it's currently in use. Because findPort() blindly retured BeginPortRange the first run, without checking if it has already been taken.
Signed-off-by: shuai-z <zs.broccoli@gmail.com>
when a container failed to start, saves the error message into State.Error so
that it can be retrieved when calling `docker inspect` instead of having to
look at the log
Docker-DCO-1.1-Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com> (github: dqminh)
Never close attached stream before both stdout and stderr have written
all their buffered contents. Remove stdinCloser because it is not needed
any more as the stream is closed anyway after attach has finished.
Fixes#3631
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Fixes#1992
Right now when you `docker cp` a path which is in a volume, the cp
itself works, however you end up getting files that are in the
container's fs rather than the files in the volume (which is not in the
container's fs).
This makes it so when you `docker cp` a path that is in a volume it
follows the volume to the real path on the host.
archive.go has been modified so that when you do `docker cp mydata:/foo
.`, and /foo is the volume, the outputed folder is called "foo" instead
of the volume ID (because we are telling it to tar up
`/var/lib/docker/vfs/dir/<some id>` and not "foo", but the user would be
expecting "foo", not the ID
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Stable IPs causes some regressions in the way people use Docker, see GH#8493.
Reverting it for 1.3, we'll enable it back for the next release.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
When a container is restarted all the volume configs are parsed again.
Even if the volume was already handled in a previous start it was still
calling "FindOrCreateVolume" on the volume repo causing a new volume to
be created.
This wasn't being detected because as part of the mount initialization
it checks to see if the the _mount_ was already initialized, but this
happens after the parsing of the configs.
So a check is added during parsing to skip a volume which was already
created for that container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Volume refs were not being restored on daemon restart.
This made it possible to remove a volume being used by other containers
after a daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When stdout/stderr is closed prematurely, the proxy's writes to stdout/stderr
(i.e. `log.Errorf/log.Printf`) will returns with EPIPE error, and go runtime
will terminate the proxy when stdout/stderr writes trigger 10 EPIPE errors.
instead of using stdout/stderr as the status handler, we pass an extra file to
the child process and write `0\n` or `1\nerror message` to it and close it
after. This allow the child process to handle stdout/stderr as normal.
Docker-DCO-1.1-Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com> (github: dqminh)
Currently if you start the docker -d on a system with 127.0.0.1 in /etc/resolv.conf
It will set the default dns to 8.8.8.8 8.8.4.4 permanently.
This causes a problem at boot on Fedora machines where NetworkManager has not
populated /etc/resolv.conf before docker gets started.
This fix checks /etc/resolv.conf on every docker run. And only populates
daemon.config.Dns if the user specified it on the command line.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The defer logic was a little tricky and was hiding one bug: `err` was
being redefined (with `:=`) and thus it escaped the defer error checking
logic.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Prior to the volumes re-factor, data was not being copied on
volumes-from or host-mounted volumes.
After the re-factor, data was being copied for volumes-from.
This reverts this unintentional change in behavior.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Needed to check if the mode was invalid and return error, not valid and
return error.
This didn't get picked up because the existing integration-cli tests
were all either expecting errors when a valid mode was passed in (e.g.
"ro" passed in, we expected an error because it was testing write). So
modified a test which was testing for "rw" to actually pass in "rw"
instead of assuming the "rw"
Docker-DCO-1.1-Signed-off-by: Brian Goff <bgoff@cpuguy83-mbp.home> (github: cpuguy83)
This change will allocate network settings (IP and public ports) at
container creation rather than start and keep them throughout the
lifetime of the container (i.e. until it gets destroyed) instead of
discarding them when the container is stopped.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
Since we are moving network allocation outside of container scope (it
will be managed by create/destroy), those functions need to be
accessible from the outside.
Signed-off-by: Andrea Luzzardi <aluzzardi@gmail.com>
unclejack