diff --git a/source/clear-linux/tutorials/smb/figures/smb-1.png b/source/clear-linux/tutorials/smb/figures/smb-1.png
new file mode 100644
index 00000000..8b0b4196
Binary files /dev/null and b/source/clear-linux/tutorials/smb/figures/smb-1.png differ
diff --git a/source/clear-linux/tutorials/smb/figures/smb-2.png b/source/clear-linux/tutorials/smb/figures/smb-2.png
new file mode 100644
index 00000000..f7a852ff
Binary files /dev/null and b/source/clear-linux/tutorials/smb/figures/smb-2.png differ
diff --git a/source/clear-linux/tutorials/smb/smb.rst b/source/clear-linux/tutorials/smb/smb.rst
new file mode 100644
index 00000000..3a80d6d1
--- /dev/null
+++ b/source/clear-linux/tutorials/smb/smb.rst
@@ -0,0 +1,98 @@
+.. _clear-samba-share-to-Windows:
+
+Enabling simple file sharing from Clear Linux to a Windows machine using Samba
+##############################################################################
+
+This guide will cover the steps you need to do to enable simple file sharing 
+from |CLOSIA| to Windows. For more advanced sharing please refer to the 
+`Samba guide`_  
+
+#.	Follow the :ref:`install-on-target` guide to install |CL|.
+#.	After |CL| is setup then add the storage-utils bundle which 
+	includes the Samba binaries. The os-clr-on-clr bundle also includes this.
+
+	.. code-block:: console
+		
+		$sudo swupd bundle-add storage-utils
+
+#.	Create a configuration file at :file:`/etc/samba/smb.conf` and add the following 
+	but change as needed. The config below has two simple examples of sharing 
+	a folder to a specific user and sharing a folder to anyone. This 
+	method assumes that a user account named "clearlinuxuser" already exists.  
+	If a valid users is not specified below then anyone with a user account 	
+	on this machine with their Samba password already set will be able to 
+	access the files.  However, that account will only be able to access files 
+	and folders that it has permission 	to on the system.  Use :command:`chown`
+	or :command:`chmod` to change either the owner of the file or the 
+	permissions to allow other users to access.  
+
+	.. code-block:: console
+
+		[Global]
+		map to guest = bad user
+
+		[Downloads]
+		path=/home/clearlinuxuser/Downloads
+		read only = no
+		guest ok = no
+		valid users = clearlinuxuser
+		
+		[Documents]
+		path=/home/clearlinuxuser/Documents
+		read only = no
+		browsable = yes
+		guest ok = yes
+
+#.	As root user, enable the Samba daemon so that it starts every time.
+
+	.. code-block:: console
+
+		# systemctl enable smb
+		# systemctl start smb
+	
+#.	Samba maintains its own list of passwords for user accounts and that can 
+	be different than the password to log in. As root user, use :command:`smbpasswd`
+	to add the initial password for the user account that will access the share. 
+
+	.. code-block:: console
+
+		# smbpasswd -a clearlinuxuser
+
+#. 	At this point a Windows machine on the same network should be able to 
+	access the shares. Windows uses the format `\\\\[server IP or hostname]\\folder`
+	to access shares. This can be done directly from Windows Explorer or the 
+	drive can be mapped to a letter in Windows.  It is easiest to use the IP 
+	address of the machine to access it. However, using the hostname of the 
+	|CL| machine will work if it is behind an Active Directory domain 
+	controller or behind a DNS server. For other ways to access the shares 
+	using a hostname instead of an IP address consult `Chapter 7 of the Samba guide`_. 
+
+Mapping |CL| drive in Windows
+*****************************
+
+#.	Open up Windows Explorer and click on the left sidebar on :guilabel:`This PC`
+	to change the options available at the top. 
+#.	Choose the :guilabel:`Map network drive` icon and put 
+	in the path as `\\\\[server IP or hostname]\\[shared folder]`. 
+#.	Check the box :guilabel:`Connect Using Different Credentials` to put in the Samba 
+	user defined above "clearlinuxuser" and the password created with 
+	:command:`smbpasswd`. See Figure 1 and Figure 2.
+
+	.. figure:: figures/smb-1.png
+		:scale: 70%
+		:alt: Mapping a share in Windows Explorer
+
+		Figure 1: Mapping a share in Windows Explorer
+
+	.. figure:: figures/smb-2.png
+		:scale: 70%
+		:alt: Mapping a share in Windows Explorer
+
+		Figure 2: Mapping a share in Windows Explorer
+
+
+
+
+
+.. _Samba guide: https://www.samba.org/samba/docs/using_samba/ch00.html
+.. _Chapter 7 of the Samba guide: https://www.samba.org/samba/docs/using_samba/ch07.html 
\ No newline at end of file
diff --git a/source/clear-linux/tutorials/tutorials.rst b/source/clear-linux/tutorials/tutorials.rst
index ca59b112..044f813a 100644
--- a/source/clear-linux/tutorials/tutorials.rst
+++ b/source/clear-linux/tutorials/tutorials.rst
@@ -18,4 +18,4 @@ specific |CLOSIA| use cases.
    fmv
    aws-web/aws-web
    telemetry-backend/telemetry-backend
-
+   smb-file-sharing/smb-file-sharing