diff --git a/source/clear-linux/guides/maintenance/Telemetry-Enable.rst b/source/clear-linux/guides/maintenance/Telemetry-Enable.rst
new file mode 100644
index 00000000..f5cbcfa2
--- /dev/null
+++ b/source/clear-linux/guides/maintenance/Telemetry-Enable.rst
@@ -0,0 +1,112 @@
+.. _telemetry-enable:
+
+Enable and disable telemetry in Clear Linux
+###########################################
+
+|CLOSIA| includes a telemetry solution as part of the OS that records events
+of interest and reports them back to the development team via the telemetrics
+daemon, :command:`telemd`. This functionality is maintained in the
+``telemetrics`` software bundle.
+
+.. note::
+	The telemetry functionality adheres to `Intel’s privacy policies`_
+	regarding the collection and use of :abbr:`PII (Personally Identifiable
+	Information)` and is open source. Specifically, no intentionally
+	identifiable information about the user or system owner is collected.
+
+End users may enable or disable the telemetry component of |CL| or even
+redirect where the records go if they wish to collect records for themselves.
+
+Install the telemetry software bundle
+*************************************
+
+During the initial installation of |CL| you are requested to join the
+stability enhancement program and allow |CLOSIA| to collect anonymous reports
+to improve system stability. If you chose not to join this program at that
+time then the telemetry software bundle is not added to your system.
+
+To install the telemetry bundle, enter the following command as either the
+root user or with :command:`sudo` priveleges:
+
+.. code-block:: console
+
+	sudo swupd bundle-add telemetrics
+
+This adds the telemetrics-client to your system and you will automatically
+opt-in for the service.
+
+Enable Telemetry
+****************
+
+To start telemetry on your system run the following command:
+
+.. code-block:: console
+
+	sudo telemctl start
+
+This enables and starts the :command:`telemd` daemon and your system will
+begin to send telemetry data to the server defined in the file
+:file:`/etc/telemetrics/telemetrics.conf`. If this file does not exist, the
+:command:`telemd` daemon will use the file
+:file:`/usr/share/defaults/telemetrics/telemetrics.conf`.
+
+Disable Telemetry
+*****************
+
+To disable the telemetry daemon run the following command:
+
+.. code-block:: console
+
+	sudo telemctl stop
+
+Opt-out of telemetry
+********************
+
+To stop sending telemetrics data from your system, opt out of the
+telemetry service:
+
+.. code-block:: console
+
+	sudo telemctl opt-out
+
+This creates the file :file:`/etc/telemetrics/opt-out` and stops the
+telemetry services.
+
+Opt-in to telemetry
+*******************
+
+Conversely, to opt-in to the telemetry services, simply enter the opt-in
+command and start the service:
+
+.. code-block:: console
+
+	sudo telemctl opt-in
+	
+This removes the file :file:`/etc/telemetrics/opt-out` file, if it exists,
+and starts the telemetry services.
+
+.. note::
+	To opt-in but not immediately start telemetry services, you will need to
+	run the command :command:`sudo telemctl stop` after the :command:`opt-in`
+	command is entered. Once you are ready to start the service, enter the
+	command	:command:`sudo telemctl start`.
+
+Remove the telemetry software bundle
+************************************
+
+To completely remove telemetrics from your system, use the command 
+:command:`swupd` to remove the telemetry software bundle:
+
+.. code-block:: console
+
+	sudo swupd bundle-remove telemetrics
+
+Additional resources
+********************
+
+https://clearlinux.org/features/telemetry
+
+https://github.com/clearlinux/telemetrics-client
+
+.. _`Intel's privacy policies`:
+   http://www.intel.com/content/www/us/en/privacy/intel-privacy.html
diff --git a/source/clear-linux/guides/maintenance/maintenance.rst b/source/clear-linux/guides/maintenance/maintenance.rst
index 8d4f0c4b..c919f846 100644
--- a/source/clear-linux/guides/maintenance/maintenance.rst
+++ b/source/clear-linux/guides/maintenance/maintenance.rst
@@ -13,3 +13,4 @@ maintaining |CLOSIA| after :ref:`installation <get-started>` is completed.
    bulk-provision
    mixer
    validate-signatures
+   telemetry-enable